Re: [ovirt-users] About installing ovirt - ovirt-engine not found
On 30/04/15 14:21, Simone Tiraboschi wrote: - Original Message - From: Lars Nielsen l...@steinwurf.com To: Simone Tiraboschi stira...@redhat.com Cc: users users@ovirt.org Sent: Thursday, April 30, 2015 2:08:10 PM Subject: Re: [ovirt-users] About installing ovirt - ovirt-engine not found On 30/04/15 13:55, Simone Tiraboschi wrote: - Original Message - From: Lars Nielsen l...@steinwurf.com To: users users@ovirt.org Sent: Thursday, April 30, 2015 1:45:29 PM Subject: [ovirt-users] About installing ovirt - ovirt-engine not found Hey I need help, with the installation of oVirt (again). After installing gluster and getting this up and running, I am trying to install ovirt, by first running this command: yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm and then yum install -y ovirt-engine However this does not work as I get: Error packages does not exist. Sorry, which distribution and which architecture are you trying to deploy on? x86_64 and fedora 21 We are still not supporting fedora 21 and we will probably jump to fedora 22 skipping 21 at all. Please see: https://bugzilla.redhat.com/show_bug.cgi?id=1163062 But should I not still be able to at least see the package? Can some please tell me how to fix it? I have tried to run yum update -y, which did not help at all Thanks in advance. - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Med venlig hilsen / Best Regards Lars Nielsen Student developer at Steinwurf l...@steinwurf.com -- Med venlig hilsen / Best Regards Lars Nielsen Student developer at Steinwurf l...@steinwurf.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] About installing ovirt - ovirt-engine not found
On 30/04/15 13:55, Simone Tiraboschi wrote: - Original Message - From: Lars Nielsen l...@steinwurf.com To: users users@ovirt.org Sent: Thursday, April 30, 2015 1:45:29 PM Subject: [ovirt-users] About installing ovirt - ovirt-engine not found Hey I need help, with the installation of oVirt (again). After installing gluster and getting this up and running, I am trying to install ovirt, by first running this command: yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm and then yum install -y ovirt-engine However this does not work as I get: Error packages does not exist. Sorry, which distribution and which architecture are you trying to deploy on? x86_64 and fedora 21 Can some please tell me how to fix it? I have tried to run yum update -y, which did not help at all Thanks in advance. - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Med venlig hilsen / Best Regards Lars Nielsen Student developer at Steinwurf l...@steinwurf.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] About installing ovirt - ovirt-engine not found
Hey I need help, with the installation of oVirt (again). After installing gluster and getting this up and running, I am trying to install ovirt, by first running this command: yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm and then yum install -y ovirt-engine However this does not work as I get: Error packages does not exist. Can some please tell me how to fix it? I have tried to run yum update -y, which did not help at all Thanks in advance. - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5 problem with gluster, can't set the group and can't find ovirt packages
Hey again I keep getting this still: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Still no luck after reinstall - Lars On 19/04/15 18:05, Lars Nielsen wrote: Hey Will try it. Thank you very much - Lars On 19 Apr 2015, at 12:35, Bernd Broermann be...@broermann.com wrote: Hi, I saw the same behavior in past. I solved it by reinstall glusterfs-server package. rpm -qf /var/lib/glusterd/groups/virt glusterfs-server-3.6.2-1.el7.x86_64 yum reinstall glusterfs-server Might fix it you also. Bernd Am 17.04.2015 um 19:52 schrieb Lars Nielsen: Hey again :) I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster following this guide: http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ However when I run the install command: yum install -y ovirt-hosted-engine-setup I get the output: No package overt-hosted-engine-setup available Error nothing to do. But I have run: yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm I get no error, and I have checked the log files. And when I run this command: gluster volume set engine group virt I get this output: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Hope some one can help. Thanks in advance - Lars Nielsen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Bernd Broermann Wellingsbütteler Landstr. 241 22337 Hamburg 0172/2982498 040/5370 http://www.broermann.com RHCE - Redhat Certified Engineer ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Med venlig hilsen / Best Regards Lars Nielsen Student developer at Steinwurf l...@steinwurf.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5 problem with gluster, can't set the group and can't find ovirt packages
On 22/04/15 14:49, Jorick Astrego wrote: On 04/22/2015 02:45 PM, Lars Nielsen wrote: Hey again I keep getting this still: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Still no luck after reinstall - Lars On 19/04/15 18:05, Lars Nielsen wrote: Hey Will try it. Thank you very much - Lars On 19 Apr 2015, at 12:35, Bernd Broermann be...@broermann.com wrote: Hi, I saw the same behavior in past. I solved it by reinstall glusterfs-server package. rpm -qf /var/lib/glusterd/groups/virt glusterfs-server-3.6.2-1.el7.x86_64 yum reinstall glusterfs-server Might fix it you also. Bernd Am 17.04.2015 um 19:52 schrieb Lars Nielsen: Hey again :) I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster following this guide: http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ However when I run the install command: yum install -y ovirt-hosted-engine-setup I get the output: No package overt-hosted-engine-setup available Error nothing to do. But I have run: yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm I get no error, and I have checked the log files. And when I run this command: gluster volume set engine group virt I get this output: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Hope some one can help. Thanks in advance - Lars Nielsen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Bernd Broermann Wellingsbütteler Landstr. 241 22337 Hamburg 0172/2982498 040/5370 http://www.broermann.com RHCE - Redhat Certified Engineer Hi, I think this is this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1129592 Netbulae mailto:i...@netbulae.com 2014-08-14 05:50:15 EDT I just read something about this in the following article: http://blog.gluster.org/2014/05/ovirt-3-4-glusterized/ Create a file named `/var/lib/glusterd/groups/virt' and paste in the lines below. This provides a virt group with settings optimized for VM storage. I've left off two quorum-related options present in the original group definition. These quorum settings help prevent split-brain, but will cause VMs hosted on Gluster volumes with the settings applied to pause when one of our two machines goes offline. quick-read=off read-ahead=off io-cache=off stat-prefetch=off eager-lock=enable remote-dio=enable Next, we'll add our new engine volume to this virt group: gluster volume set engine group virt I never createde the virt file and it's not in this directory. Can it be auto created on setup? Forgot to add these for cluster 2 nodes: quorum-type=auto server-quorum-type=server As perhttps://github.com/gluster/glusterfs/blob/master/extras/group-virt.example Met vriendelijke groet, With kind regards, Jorick Astrego* Netbulae Virtualization Experts * Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3AKvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA EnschedeBTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Work thank you very much :) -- Med venlig hilsen / Best Regards Lars Nielsen Student developer at Steinwurf l...@steinwurf.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5 problem with gluster, can't set the group and can't find ovirt packages
Hey Will try it. Thank you very much - Lars On 19 Apr 2015, at 12:35, Bernd Broermann be...@broermann.com wrote: Hi, I saw the same behavior in past. I solved it by reinstall glusterfs-server package. rpm -qf /var/lib/glusterd/groups/virt glusterfs-server-3.6.2-1.el7.x86_64 yum reinstall glusterfs-server Might fix it you also. Bernd Am 17.04.2015 um 19:52 schrieb Lars Nielsen: Hey again :) I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster following this guide: http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ However when I run the install command: yum install -y ovirt-hosted-engine-setup I get the output: No package overt-hosted-engine-setup available Error nothing to do. But I have run: yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm I get no error, and I have checked the log files. And when I run this command: gluster volume set engine group virt I get this output: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Hope some one can help. Thanks in advance - Lars Nielsen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Bernd Broermann Wellingsbütteler Landstr. 241 22337 Hamburg 0172/2982498 040/5370 http://www.broermann.com RHCE - Redhat Certified Engineer ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt 3.5 problem with gluster, can't set the group and can't find ovirt packages
Hey again :) I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster following this guide: http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ However when I run the install command: yum install -y ovirt-hosted-engine-setup I get the output: No package overt-hosted-engine-setup available Error nothing to do. But I have run: yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm I get no error, and I have checked the log files. And when I run this command: gluster volume set engine group virt I get this output: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Hope some one can help. Thanks in advance - Lars Nielsen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] problem adding storage connection
On 20/01/15 09:30, Lars Nielsen wrote: On 20/01/15 09:09, Martin Pavlík wrote: ccing Carlos as he might be able to help Hi Lars, 1) remove as many restrictions as you can from your NFS export , allow all to access and restrict it back step by step if removing restriction will work 2) make sure that exported folders have owner and group vdsm:kvm (aka 36:36) 3) pls check (and provide) /var/log/vdsm/vdsm.log and /var/log/vdsm/supervdsm.log on the hypervisor which is storage pool manager (aka SPM), you can identify it on hosts tab in GUI Martin On 20 Jan 2015, at 08:51, Lars Nielsen l...@steinwurf.com wrote: On 15/01/15 16:38, Donny Davis wrote: Also check to see if there are any directories that have been created in your nfs exports Donny -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Martin Pavlík Sent: Thursday, January 15, 2015 8:01 AM To: Lars Nielsen Cc: users@ovirt.org Subject: Re: [ovirt-users] problem adding storage connection Hi Lars, are you sure you want to use net mask 225.225.225.0? IMO you want to use 255.255.255.0 If it does not help please supply logs /var/log/ovirt-engine/engine.log - from engine node (RHEV-M) and /var/log/vdsm/vdsm.log so we can see detailed error message HTH Martin Pavlik RHEV QE On 15 Jan 2015, at 14:22, Lars Nielsen l...@steinwurf.com wrote: Hello again. And thanks for the help, now I can create hosts, which run :) However I have run into a bit more trouble, again which seems a bit strange to me. When trying to added a new Storage connection, I get this: Error while executing action: Cannot add Storage Connection. Storage connection already exists. https://dl.dropboxusercontent.com/u/55488/ovirt_storage_problem.png My exports file, look like this: /home/iso 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) /home/data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) /home/import_data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) Copied from the oVirt basic setup guide. And I have restarted my NFS server service, and create the directories. Can some one help with this? and explain the problem to me? If you need more info, please tell me. Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hey. I tried fixing it by changing 225.225.225.0 to 255.255.255.0 to no avail. So please help me again, I have looked through logs, and found this: 015-01-20 08:40:14,177 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-4) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User admin logged in. 2015-01-20 08:40:14,226 INFO [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (ajp--127.0.0.1-8702-5) Running command: LoginUserCommand internal: false. 2015-01-20 08:41:04,709 INFO [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] Lock Acquired to object EngineLock [exclusiveLocks= key: 192.168.0.112:/home/data value: STORAGE_CONNECTION , sharedLocks= ] 2015-01-20 08:41:04,711 WARN [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] CanDoAction of action AddStorageServerConnection failed. Reasons:VAR__ACTION__ADD,VAR__TYPE__STORAGE__CONNECTION,ACTION_TYPE_FAILED_STORAGE_CONNECTION_ALREADY_EXISTS 2015-01-20 08:41:04,711 INFO [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] Lock freed to object EngineLock [exclusiveLocks= key: 192.168.0.112:/home/data value: STORAGE_CONNECTION , sharedLocks= ] But I am not really sure what to do, to fix it :) The complete oVirt log folder can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt-engine_log_v2.tar Thanks and Best Regards - Lars I have removed the restrictions. Still no loot. The logs for oVirt and VDSM https://dl.dropboxusercontent.com/u/55488/documents-export-2015-01-20.zip Really no one has an explanation ? :( -- Med venlig hilsen / Best Regards Lars Nielsen Student developer at Steinwurf l...@steinwurf.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] problem adding storage connection
On 20/01/15 09:09, Martin Pavlík wrote: ccing Carlos as he might be able to help Hi Lars, 1) remove as many restrictions as you can from your NFS export , allow all to access and restrict it back step by step if removing restriction will work 2) make sure that exported folders have owner and group vdsm:kvm (aka 36:36) 3) pls check (and provide) /var/log/vdsm/vdsm.log and /var/log/vdsm/supervdsm.log on the hypervisor which is storage pool manager (aka SPM), you can identify it on hosts tab in GUI Martin On 20 Jan 2015, at 08:51, Lars Nielsen l...@steinwurf.com wrote: On 15/01/15 16:38, Donny Davis wrote: Also check to see if there are any directories that have been created in your nfs exports Donny -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Martin Pavlík Sent: Thursday, January 15, 2015 8:01 AM To: Lars Nielsen Cc: users@ovirt.org Subject: Re: [ovirt-users] problem adding storage connection Hi Lars, are you sure you want to use net mask 225.225.225.0? IMO you want to use 255.255.255.0 If it does not help please supply logs /var/log/ovirt-engine/engine.log - from engine node (RHEV-M) and /var/log/vdsm/vdsm.log so we can see detailed error message HTH Martin Pavlik RHEV QE On 15 Jan 2015, at 14:22, Lars Nielsen l...@steinwurf.com wrote: Hello again. And thanks for the help, now I can create hosts, which run :) However I have run into a bit more trouble, again which seems a bit strange to me. When trying to added a new Storage connection, I get this: Error while executing action: Cannot add Storage Connection. Storage connection already exists. https://dl.dropboxusercontent.com/u/55488/ovirt_storage_problem.png My exports file, look like this: /home/iso 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) /home/data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) /home/import_data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) Copied from the oVirt basic setup guide. And I have restarted my NFS server service, and create the directories. Can some one help with this? and explain the problem to me? If you need more info, please tell me. Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hey. I tried fixing it by changing 225.225.225.0 to 255.255.255.0 to no avail. So please help me again, I have looked through logs, and found this: 015-01-20 08:40:14,177 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-4) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User admin logged in. 2015-01-20 08:40:14,226 INFO [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (ajp--127.0.0.1-8702-5) Running command: LoginUserCommand internal: false. 2015-01-20 08:41:04,709 INFO [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] Lock Acquired to object EngineLock [exclusiveLocks= key: 192.168.0.112:/home/data value: STORAGE_CONNECTION , sharedLocks= ] 2015-01-20 08:41:04,711 WARN [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] CanDoAction of action AddStorageServerConnection failed. Reasons:VAR__ACTION__ADD,VAR__TYPE__STORAGE__CONNECTION,ACTION_TYPE_FAILED_STORAGE_CONNECTION_ALREADY_EXISTS 2015-01-20 08:41:04,711 INFO [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] Lock freed to object EngineLock [exclusiveLocks= key: 192.168.0.112:/home/data value: STORAGE_CONNECTION , sharedLocks= ] But I am not really sure what to do, to fix it :) The complete oVirt log folder can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt-engine_log_v2.tar Thanks and Best Regards - Lars I have removed the restrictions. Still no loot. The logs for oVirt and VDSM https://dl.dropboxusercontent.com/u/55488/documents-export-2015-01-20.zip -- Thanks - Med venlig hilsen / Best Regards Lars Nielsen Student developer at Steinwurf l...@steinwurf.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] problem adding storage connection
On 15/01/15 16:38, Donny Davis wrote: Also check to see if there are any directories that have been created in your nfs exports Donny -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Martin Pavlík Sent: Thursday, January 15, 2015 8:01 AM To: Lars Nielsen Cc: users@ovirt.org Subject: Re: [ovirt-users] problem adding storage connection Hi Lars, are you sure you want to use net mask 225.225.225.0? IMO you want to use 255.255.255.0 If it does not help please supply logs /var/log/ovirt-engine/engine.log - from engine node (RHEV-M) and /var/log/vdsm/vdsm.log so we can see detailed error message HTH Martin Pavlik RHEV QE On 15 Jan 2015, at 14:22, Lars Nielsen l...@steinwurf.com wrote: Hello again. And thanks for the help, now I can create hosts, which run :) However I have run into a bit more trouble, again which seems a bit strange to me. When trying to added a new Storage connection, I get this: Error while executing action: Cannot add Storage Connection. Storage connection already exists. https://dl.dropboxusercontent.com/u/55488/ovirt_storage_problem.png My exports file, look like this: /home/iso 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) /home/data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) /home/import_data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonui d=36,anongid=36) Copied from the oVirt basic setup guide. And I have restarted my NFS server service, and create the directories. Can some one help with this? and explain the problem to me? If you need more info, please tell me. Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hey. I tried fixing it by changing 225.225.225.0 to 255.255.255.0 to no avail. So please help me again, I have looked through logs, and found this: 015-01-20 08:40:14,177 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-4) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User admin logged in. 2015-01-20 08:40:14,226 INFO [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (ajp--127.0.0.1-8702-5) Running command: LoginUserCommand internal: false. 2015-01-20 08:41:04,709 INFO [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] Lock Acquired to object EngineLock [exclusiveLocks= key: 192.168.0.112:/home/data value: STORAGE_CONNECTION , sharedLocks= ] 2015-01-20 08:41:04,711 WARN [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] CanDoAction of action AddStorageServerConnection failed. Reasons:VAR__ACTION__ADD,VAR__TYPE__STORAGE__CONNECTION,ACTION_TYPE_FAILED_STORAGE_CONNECTION_ALREADY_EXISTS 2015-01-20 08:41:04,711 INFO [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-10) [27222a90] Lock freed to object EngineLock [exclusiveLocks= key: 192.168.0.112:/home/data value: STORAGE_CONNECTION , sharedLocks= ] But I am not really sure what to do, to fix it :) The complete oVirt log folder can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt-engine_log_v2.tar Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] problem adding storage connection
Hello again. And thanks for the help, now I can create hosts, which run :) However I have run into a bit more trouble, again which seems a bit strange to me. When trying to added a new Storage connection, I get this: Error while executing action: Cannot add Storage Connection. Storage connection already exists. https://dl.dropboxusercontent.com/u/55488/ovirt_storage_problem.png My exports file, look like this: /home/iso 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonuid=36,anongid=36) /home/data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonuid=36,anongid=36) /home/import_data 192.168.0.112/225.225.225.0(rw,sync,no_subtree_check,all_squash,anonuid=36,anongid=36) Copied from the oVirt basic setup guide. And I have restarted my NFS server service, and create the directories. Can some one help with this? and explain the problem to me? If you need more info, please tell me. Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 14/01/15 09:43, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsen l...@steinwurf.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Wednesday, January 14, 2015 9:55:55 AM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmtnetwork missing On 13/01/15 16:03, Michael Burman wrote: Also change NAME=em1 to: DEVICE=em1 and remove the # from the BOOTPROTO=none - Original Message - From: Michael Burman mbur...@redhat.com To: Lars Nielsen l...@steinwurf.com Cc: users@ovirt.org Sent: Tuesday, January 13, 2015 4:48:55 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmtnetwork missing Hi Lars First of all you have to decide from where your ovirtmgmt getting the ip, if it is from a dhcp server, you have to delete this lines from your ifcfg-ovirtmgmt file: IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 and add the next line: NM_CONTROLLED=no - in the ifcfg-em1 file change: BOOTPROTO=none and add the line: NM_CONTROLLED=no restart your engine /etc/init.d/ovirt-engine restart and make sure your ovirtmgmt got ip and you have a default gateway, you can run: route -n Put your host in maintenance mode , try to activate or re-install. Best regards, Michael B - Original Message - From: Lars Nielsen l...@steinwurf.com To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, January 13, 2015 12:05:05 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 10:33, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To: Yedidyah Bar Davidd...@redhat.com Cc:users@ovirt.org Sent: Tuesday, January 13, 2015 11:26:55 AM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 09:31, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To:users@ovirt.org Sent: Tuesday, January 13, 2015 10:20:20 AM Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing Hey I am new to oVirt, so please be patient I have a problem, when setting up new hosts. Doing the setup it self no problem, but afterwards the status is set to NonOperational. Do to the network ovirtmgmt is missing on the machine. However I have added the following ifcfg file: ifcfg-ovirtmgmt:: DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 And made the adjustments, so the ifcfg-en1, file looks like this: TYPE=Ethernet #BOOTPROTO=dhcp DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=em1 UUID=bdc14160-3cb6-48d7-b8b9-a382dc384add ONBOOT=yes HWADDR=F8:B1:56:C1:F9:8E PEERDNS=yes PEERROUTES=yes BRIDGE=ovirtmgmt I do realize that, the guides on the web for oVirt set BOOTPROTO to static. But at the office, we do not have the possibility of static IP, at the moment. Can some one please tell me what could be wrong ? dhcp should work too. The problem is with NetworkManager. You'll need to have static IPs though for the engine to be able to contact the hosts (as well as the hosts themselves, for hosted-engine HA at least), or you'll have problems if they for some reason get a different IP address from your dhcp server. Please post relevant logs: hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/* engine - /var/log/ovirt-engine/* Thanks and best regards, Okay something seems to be a food here, because on the server hosting our oVirt instance. We do not have a /var/log/ovirt-hosted-engine directory. I didn't say you should - I wrote a '*' in the end. You should find /var/log/ovirt-hosted-engine-ha /var/log/ovirt-hosted-engine-setup But now I realize you did not mention hosted-engine. Can you detail a bit your setup? Where is the engine? Where are the hosts? How did you install and setup? Can you please? Including OSes of each machine? Which packages you installed, from which repo? However the log files from the two other directories, can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar Please add from engine also /var/log/ovirt-engine/host-deploy/* . Thanks! We do not have any ovirt-hosted-engine-* on the server, how ever here is a link to the complete ovirt-engine folder: https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hey. I have had a look at this. This /etc/init.d/ovirt-engine, we also do not have on our system. You won't find it on fedora, this is a sysvinit script. On fedora you should have /usr/lib/systemd/system/ovirt-engine.service . So how can I restart my oVirt instance? For both systemd and sysv, this should work: service ovirt-engine
Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 14/01/15 09:43, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsen l...@steinwurf.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Wednesday, January 14, 2015 9:55:55 AM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmtnetwork missing On 13/01/15 16:03, Michael Burman wrote: Also change NAME=em1 to: DEVICE=em1 and remove the # from the BOOTPROTO=none - Original Message - From: Michael Burman mbur...@redhat.com To: Lars Nielsen l...@steinwurf.com Cc: users@ovirt.org Sent: Tuesday, January 13, 2015 4:48:55 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmtnetwork missing Hi Lars First of all you have to decide from where your ovirtmgmt getting the ip, if it is from a dhcp server, you have to delete this lines from your ifcfg-ovirtmgmt file: IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 and add the next line: NM_CONTROLLED=no - in the ifcfg-em1 file change: BOOTPROTO=none and add the line: NM_CONTROLLED=no restart your engine /etc/init.d/ovirt-engine restart and make sure your ovirtmgmt got ip and you have a default gateway, you can run: route -n Put your host in maintenance mode , try to activate or re-install. Best regards, Michael B - Original Message - From: Lars Nielsen l...@steinwurf.com To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, January 13, 2015 12:05:05 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 10:33, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To: Yedidyah Bar Davidd...@redhat.com Cc:users@ovirt.org Sent: Tuesday, January 13, 2015 11:26:55 AM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 09:31, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To:users@ovirt.org Sent: Tuesday, January 13, 2015 10:20:20 AM Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing Hey I am new to oVirt, so please be patient I have a problem, when setting up new hosts. Doing the setup it self no problem, but afterwards the status is set to NonOperational. Do to the network ovirtmgmt is missing on the machine. However I have added the following ifcfg file: ifcfg-ovirtmgmt:: DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 And made the adjustments, so the ifcfg-en1, file looks like this: TYPE=Ethernet #BOOTPROTO=dhcp DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=em1 UUID=bdc14160-3cb6-48d7-b8b9-a382dc384add ONBOOT=yes HWADDR=F8:B1:56:C1:F9:8E PEERDNS=yes PEERROUTES=yes BRIDGE=ovirtmgmt I do realize that, the guides on the web for oVirt set BOOTPROTO to static. But at the office, we do not have the possibility of static IP, at the moment. Can some one please tell me what could be wrong ? dhcp should work too. The problem is with NetworkManager. You'll need to have static IPs though for the engine to be able to contact the hosts (as well as the hosts themselves, for hosted-engine HA at least), or you'll have problems if they for some reason get a different IP address from your dhcp server. Please post relevant logs: hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/* engine - /var/log/ovirt-engine/* Thanks and best regards, Okay something seems to be a food here, because on the server hosting our oVirt instance. We do not have a /var/log/ovirt-hosted-engine directory. I didn't say you should - I wrote a '*' in the end. You should find /var/log/ovirt-hosted-engine-ha /var/log/ovirt-hosted-engine-setup But now I realize you did not mention hosted-engine. Can you detail a bit your setup? Where is the engine? Where are the hosts? How did you install and setup? Can you please? Including OSes of each machine? Which packages you installed, from which repo? However the log files from the two other directories, can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar Please add from engine also /var/log/ovirt-engine/host-deploy/* . Thanks! We do not have any ovirt-hosted-engine-* on the server, how ever here is a link to the complete ovirt-engine folder: https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hey. I have had a look at this. This /etc/init.d/ovirt-engine, we also do not have on our system. You won't find it on fedora, this is a sysvinit script. On fedora you should have /usr/lib/systemd/system/ovirt-engine.service . So how can I restart my oVirt instance? For both systemd and sysv, this should work: service ovirt-engine
Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 14/01/15 10:25, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsen l...@steinwurf.com To: Yedidyah Bar David d...@redhat.com Cc: Michael Burman mbur...@redhat.com, users@ovirt.org Sent: Wednesday, January 14, 2015 10:51:19 AM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmtnetwork missing [snip] We are testing out, different solution for virtualization, to set up a more diverge build environment. OK. So I am testing out oVirt for this purpose, and I am at the stage where I am to setup the first host. Meaning, you have the engine up and running on some machine (VM), and now try to install a host. Right? Which OSes? However, when the host it setup, I get the error NonOperational, because it can not find the ovirtmgmt network on the machine. Please post the host-install log of this host. You should find it on engine machine in /var/log/ovirt-engine/host-deploy . As mentioned already, there are problems with NetworkManager. I suggest to remove it completely from the host, make sure networking works well, then try to reinstall the host from the web admin. If it fails, please post host-install logs. Thanks. Best, You can find the log file, in this tar ball: https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 13/01/15 16:03, Michael Burman wrote: Also change NAME=em1 to: DEVICE=em1 and remove the # from the BOOTPROTO=none - Original Message - From: Michael Burman mbur...@redhat.com To: Lars Nielsen l...@steinwurf.com Cc: users@ovirt.org Sent: Tuesday, January 13, 2015 4:48:55 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmtnetwork missing Hi Lars First of all you have to decide from where your ovirtmgmt getting the ip, if it is from a dhcp server, you have to delete this lines from your ifcfg-ovirtmgmt file: IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 and add the next line: NM_CONTROLLED=no - in the ifcfg-em1 file change: BOOTPROTO=none and add the line: NM_CONTROLLED=no restart your engine /etc/init.d/ovirt-engine restart and make sure your ovirtmgmt got ip and you have a default gateway, you can run: route -n Put your host in maintenance mode , try to activate or re-install. Best regards, Michael B - Original Message - From: Lars Nielsen l...@steinwurf.com To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, January 13, 2015 12:05:05 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 10:33, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To: Yedidyah Bar Davidd...@redhat.com Cc:users@ovirt.org Sent: Tuesday, January 13, 2015 11:26:55 AM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 09:31, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To:users@ovirt.org Sent: Tuesday, January 13, 2015 10:20:20 AM Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing Hey I am new to oVirt, so please be patient I have a problem, when setting up new hosts. Doing the setup it self no problem, but afterwards the status is set to NonOperational. Do to the network ovirtmgmt is missing on the machine. However I have added the following ifcfg file: ifcfg-ovirtmgmt:: DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 And made the adjustments, so the ifcfg-en1, file looks like this: TYPE=Ethernet #BOOTPROTO=dhcp DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=em1 UUID=bdc14160-3cb6-48d7-b8b9-a382dc384add ONBOOT=yes HWADDR=F8:B1:56:C1:F9:8E PEERDNS=yes PEERROUTES=yes BRIDGE=ovirtmgmt I do realize that, the guides on the web for oVirt set BOOTPROTO to static. But at the office, we do not have the possibility of static IP, at the moment. Can some one please tell me what could be wrong ? dhcp should work too. The problem is with NetworkManager. You'll need to have static IPs though for the engine to be able to contact the hosts (as well as the hosts themselves, for hosted-engine HA at least), or you'll have problems if they for some reason get a different IP address from your dhcp server. Please post relevant logs: hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/* engine - /var/log/ovirt-engine/* Thanks and best regards, Okay something seems to be a food here, because on the server hosting our oVirt instance. We do not have a /var/log/ovirt-hosted-engine directory. I didn't say you should - I wrote a '*' in the end. You should find /var/log/ovirt-hosted-engine-ha /var/log/ovirt-hosted-engine-setup But now I realize you did not mention hosted-engine. Can you detail a bit your setup? Where is the engine? Where are the hosts? How did you install and setup? However the log files from the two other directories, can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar Please add from engine also /var/log/ovirt-engine/host-deploy/* . Thanks! We do not have any ovirt-hosted-engine-* on the server, how ever here is a link to the complete ovirt-engine folder: https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hey. I have had a look at this. This /etc/init.d/ovirt-engine, we also do not have on our system. So how can I restart my oVirt instance? How ever I have updated the network scripts: https://dl.dropboxusercontent.com/u/55488/network_scripts.tar To me this seems stranger and stranger, in the sense that we are missing stuff. I have followed the oVirt documentation doing installation, which I assume is correct. Thank and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Host in NonOperational mode ovirtmgmt network missing
Hey I am new to oVirt, so please be patient I have a problem, when setting up new hosts. Doing the setup it self no problem, but afterwards the status is set to NonOperational. Do to the network ovirtmgmt is missing on the machine. However I have added the following ifcfg file: ifcfg-ovirtmgmt:: DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 And made the adjustments, so the ifcfg-en1, file looks like this: TYPE=Ethernet #BOOTPROTO=dhcp DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=em1 UUID=bdc14160-3cb6-48d7-b8b9-a382dc384add ONBOOT=yes HWADDR=F8:B1:56:C1:F9:8E PEERDNS=yes PEERROUTES=yes BRIDGE=ovirtmgmt I do realize that, the guides on the web for oVirt set BOOTPROTO to static. But at the office, we do not have the possibility of static IP, at the moment. Can some one please tell me what could be wrong ? - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 13/01/15 09:31, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsen l...@steinwurf.com To: users@ovirt.org Sent: Tuesday, January 13, 2015 10:20:20 AM Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing Hey I am new to oVirt, so please be patient I have a problem, when setting up new hosts. Doing the setup it self no problem, but afterwards the status is set to NonOperational. Do to the network ovirtmgmt is missing on the machine. However I have added the following ifcfg file: ifcfg-ovirtmgmt:: DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 And made the adjustments, so the ifcfg-en1, file looks like this: TYPE=Ethernet #BOOTPROTO=dhcp DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=em1 UUID=bdc14160-3cb6-48d7-b8b9-a382dc384add ONBOOT=yes HWADDR=F8:B1:56:C1:F9:8E PEERDNS=yes PEERROUTES=yes BRIDGE=ovirtmgmt I do realize that, the guides on the web for oVirt set BOOTPROTO to static. But at the office, we do not have the possibility of static IP, at the moment. Can some one please tell me what could be wrong ? dhcp should work too. The problem is with NetworkManager. You'll need to have static IPs though for the engine to be able to contact the hosts (as well as the hosts themselves, for hosted-engine HA at least), or you'll have problems if they for some reason get a different IP address from your dhcp server. Please post relevant logs: hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/* engine - /var/log/ovirt-engine/* Thanks and best regards, Okay something seems to be a food here, because on the server hosting our oVirt instance. We do not have a /var/log/ovirt-hosted-engine directory. However the log files from the two other directories, can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar Thanks and best regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 13/01/15 10:33, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To: Yedidyah Bar Davidd...@redhat.com Cc:users@ovirt.org Sent: Tuesday, January 13, 2015 11:26:55 AM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 09:31, Yedidyah Bar David wrote: - Original Message - From: Lars Nielsenl...@steinwurf.com To:users@ovirt.org Sent: Tuesday, January 13, 2015 10:20:20 AM Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing Hey I am new to oVirt, so please be patient I have a problem, when setting up new hosts. Doing the setup it self no problem, but afterwards the status is set to NonOperational. Do to the network ovirtmgmt is missing on the machine. However I have added the following ifcfg file: ifcfg-ovirtmgmt:: DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 And made the adjustments, so the ifcfg-en1, file looks like this: TYPE=Ethernet #BOOTPROTO=dhcp DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=em1 UUID=bdc14160-3cb6-48d7-b8b9-a382dc384add ONBOOT=yes HWADDR=F8:B1:56:C1:F9:8E PEERDNS=yes PEERROUTES=yes BRIDGE=ovirtmgmt I do realize that, the guides on the web for oVirt set BOOTPROTO to static. But at the office, we do not have the possibility of static IP, at the moment. Can some one please tell me what could be wrong ? dhcp should work too. The problem is with NetworkManager. You'll need to have static IPs though for the engine to be able to contact the hosts (as well as the hosts themselves, for hosted-engine HA at least), or you'll have problems if they for some reason get a different IP address from your dhcp server. Please post relevant logs: hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/* engine - /var/log/ovirt-engine/* Thanks and best regards, Okay something seems to be a food here, because on the server hosting our oVirt instance. We do not have a /var/log/ovirt-hosted-engine directory. I didn't say you should - I wrote a '*' in the end. You should find /var/log/ovirt-hosted-engine-ha /var/log/ovirt-hosted-engine-setup But now I realize you did not mention hosted-engine. Can you detail a bit your setup? Where is the engine? Where are the hosts? How did you install and setup? However the log files from the two other directories, can be found here: https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar Please add from engine also /var/log/ovirt-engine/host-deploy/* . Thanks! We do not have any ovirt-hosted-engine-* on the server, how ever here is a link to the complete ovirt-engine folder: https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar Thanks and Best Regards - Lars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
