On 14/01/15 09:43, Yedidyah Bar David wrote:
----- Original Message -----
From: "Lars Nielsen" <l...@steinwurf.com>
To: "Michael Burman" <mbur...@redhat.com>
Cc: users@ovirt.org
Sent: Wednesday, January 14, 2015 9:55:55 AM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt        network 
missing


On 13/01/15 16:03, Michael Burman wrote:
Also change NAME=em1
to:
DEVICE=em1
   and remove the # from the BOOTPROTO=none


----- Original Message -----
From: "Michael Burman" <mbur...@redhat.com>
To: "Lars Nielsen" <l...@steinwurf.com>
Cc: users@ovirt.org
Sent: Tuesday, January 13, 2015 4:48:55 PM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt        network
        missing

Hi Lars

First of all you have to decide from where your ovirtmgmt getting the ip,
if it is from a dhcp server, you have to delete this lines from your
ifcfg-ovirtmgmt file:
IPADDR=192.168.1.10
NETMASK=255.255.255.0
GATEWAY=192.168.0.1

and add the next line:
NM_CONTROLLED=no

- in the ifcfg-em1 file change:
BOOTPROTO=none

and add the line:
NM_CONTROLLED=no

restart your engine /etc/init.d/ovirt-engine restart and make sure your
ovirtmgmt got ip and you have a default gateway, you can run: route -n

Put your host in maintenance mode , try to activate or re-install.

Best regards,

Michael B


----- Original Message -----
From: "Lars Nielsen" <l...@steinwurf.com>
To: "Yedidyah Bar David" <d...@redhat.com>
Cc: users@ovirt.org
Sent: Tuesday, January 13, 2015 12:05:05 PM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network
        missing


On 13/01/15 10:33, Yedidyah Bar David wrote:
----- Original Message -----
From: "Lars Nielsen"<l...@steinwurf.com>
To: "Yedidyah Bar David"<d...@redhat.com>
Cc:users@ovirt.org
Sent: Tuesday, January 13, 2015 11:26:55 AM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network
missing


On 13/01/15 09:31, Yedidyah Bar David wrote:
----- Original Message -----
From: "Lars Nielsen"<l...@steinwurf.com>
To:users@ovirt.org
Sent: Tuesday, January 13, 2015 10:20:20 AM
Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network
missing

Hey I am new to oVirt, so please be patient

I have a problem, when setting up new hosts.
Doing the setup it self no problem, but afterwards the status is set to
NonOperational.
Do to the network ovirtmgmt is missing on the machine.

However I have added the following ifcfg file:
ifcfg-ovirtmgmt::
DEVICE=ovirtmgmt
TYPE=Bridge
ONBOOT=yes
DELAY=0
BOOTPROTO=dhcp
IPADDR=192.168.1.10
NETMASK=255.255.255.0
GATEWAY=192.168.0.1

And made the adjustments, so the ifcfg-en1, file looks like this:
TYPE="Ethernet"
#BOOTPROTO="dhcp"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
IPV6_FAILURE_FATAL="no"
NAME="em1"
UUID="bdc14160-3cb6-48d7-b8b9-a382dc384add"
ONBOOT="yes"
HWADDR="F8:B1:56:C1:F9:8E"
PEERDNS="yes"
PEERROUTES="yes"
BRIDGE=ovirtmgmt


I do realize that, the guides on the web for oVirt set BOOTPROTO to
static. But at the office, we do not have the possibility of static IP,
at the moment.

Can some one please tell me what could be wrong ?
dhcp should work too. The problem is with NetworkManager.
You'll need to have static IPs though for the engine to be able to
contact the hosts (as well as the hosts themselves, for hosted-engine HA
at least), or you'll have problems if they for some reason get a
different
IP address from your dhcp server.

Please post relevant logs:
hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/*
engine - /var/log/ovirt-engine/*

Thanks and best regards,
Okay something seems to be a food here, because on the server hosting
our oVirt instance. We do not have a /var/log/ovirt-hosted-engine
directory.
I didn't say you should - I wrote a '*' in the end. You should find
/var/log/ovirt-hosted-engine-ha
/var/log/ovirt-hosted-engine-setup

But now I realize you did not mention hosted-engine. Can you detail
a bit your setup? Where is the engine? Where are the hosts? How
did you install and setup?
Can you please? Including OSes of each machine? Which packages you
installed, from which repo?

However the log files from the two other directories, can be found here:
https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar
Please add from engine also /var/log/ovirt-engine/host-deploy/* .

Thanks!
We do not have any ovirt-hosted-engine-* on the server, how ever here is
a link to the complete ovirt-engine folder:
https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar

Thanks and Best Regards
- Lars
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Hey.
I have had a look at this. This /etc/init.d/ovirt-engine, we also do not
have on our system.
You won't find it on fedora, this is a sysvinit script. On fedora you should
have /usr/lib/systemd/system/ovirt-engine.service .

So how can I restart my oVirt instance?
For both systemd and sysv, this should work:
service ovirt-engine restart

How ever I have updated the network scripts:
https://dl.dropboxusercontent.com/u/55488/network_scripts.tar

To me this seems stranger and stranger, in the sense that we are missing
stuff. I have followed the oVirt documentation doing installation, which
I assume is correct.
Perhaps you can start with explaining what you are trying to do, how, and
what fails...

Best regards,
We are testing out, different solution for virtualization, to set up a more diverge build environment. So I am testing out oVirt for this purpose, and I am at the stage where I am to setup the first host. However, when the host it setup, I get the error NonOperational, because it can not find the ovirtmgmt network on the machine.

Thanks and Best Regards
- Lars
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to