On 13/01/15 10:33, Yedidyah Bar David wrote:
----- Original Message -----
From: "Lars Nielsen"<[email protected]>
To: "Yedidyah Bar David"<[email protected]>
Cc:[email protected]
Sent: Tuesday, January 13, 2015 11:26:55 AM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 13/01/15 09:31, Yedidyah Bar David wrote:
----- Original Message -----
From: "Lars Nielsen"<[email protected]>
To:[email protected]
Sent: Tuesday, January 13, 2015 10:20:20 AM
Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network
missing
Hey I am new to oVirt, so please be patient
I have a problem, when setting up new hosts.
Doing the setup it self no problem, but afterwards the status is set to
NonOperational.
Do to the network ovirtmgmt is missing on the machine.
However I have added the following ifcfg file:
ifcfg-ovirtmgmt::
DEVICE=ovirtmgmt
TYPE=Bridge
ONBOOT=yes
DELAY=0
BOOTPROTO=dhcp
IPADDR=192.168.1.10
NETMASK=255.255.255.0
GATEWAY=192.168.0.1
And made the adjustments, so the ifcfg-en1, file looks like this:
TYPE="Ethernet"
#BOOTPROTO="dhcp"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
IPV6_FAILURE_FATAL="no"
NAME="em1"
UUID="bdc14160-3cb6-48d7-b8b9-a382dc384add"
ONBOOT="yes"
HWADDR="F8:B1:56:C1:F9:8E"
PEERDNS="yes"
PEERROUTES="yes"
BRIDGE=ovirtmgmt
I do realize that, the guides on the web for oVirt set BOOTPROTO to
static. But at the office, we do not have the possibility of static IP,
at the moment.
Can some one please tell me what could be wrong ?
dhcp should work too. The problem is with NetworkManager.
You'll need to have static IPs though for the engine to be able to
contact the hosts (as well as the hosts themselves, for hosted-engine HA
at least), or you'll have problems if they for some reason get a different
IP address from your dhcp server.
Please post relevant logs:
hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/*
engine - /var/log/ovirt-engine/*
Thanks and best regards,
Okay something seems to be a food here, because on the server hosting
our oVirt instance. We do not have a /var/log/ovirt-hosted-engine
directory.
I didn't say you should - I wrote a '*' in the end. You should find
/var/log/ovirt-hosted-engine-ha
/var/log/ovirt-hosted-engine-setup
But now I realize you did not mention hosted-engine. Can you detail
a bit your setup? Where is the engine? Where are the hosts? How
did you install and setup?
However the log files from the two other directories, can be found here:
https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar
Please add from engine also /var/log/ovirt-engine/host-deploy/* .
Thanks!
We do not have any ovirt-hosted-engine-* on the server, how ever here is
a link to the complete ovirt-engine folder:
https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar
Thanks and Best Regards
- Lars
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
