Re: Networking examples
On 18/8/2023 12:54 am, Gedare Bloom wrote: > I don't think that "--with-rtems" is a valid command line option to > use. I guess RSB should be a little more noisy about unknown command > line options. The --with-* and --without-* options align to the autoconf type options where users can override some defaults. The reason the RSB cannot say anything is it does not know what is needed or used. The --with-*/--without-* options define a specific type of macro the config scripts can use to key specific functionality around. The RSB python code which handles the command line and reports any errors does not know all the config logic paths in advance so it cannot say if a value is needed or right. This is also the reason a generic approach is being used rather than being able to specify specific options for specific purposes. Resolving the issue might be possible with a lot of work and it would require a number of changes in a few places based around some form of a config definition of the with and without options. Chris ___ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
Re: Networking examples
Hi Gedare, Thanks again for the response, and my apologies for not getting around to it until today. Here is what I tried: * Changed the 'sparc' argument to just a bsp (erc32), as is indicated in the documentation. This failed because it was then searching for the wrong tool. ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=erc32 RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified) warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake Build Set: 6/rtems-net-legacy config: tools/rtems-net-legacy-6.cfg error: config error: rtems-bsp.cfg:104: RTEMS tools not found (erc32-rtems6-gcc) found; Please check the --with-tools option or --prefix. Build FAILED Build Set: Time 0:00:00.012689 Build FAILED * Because that failed, I tried the arch/bsp combination (this would require a change to the documentation if it was correct). This failed because it's not finding the tools: ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc/erc32 RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified) warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake Build Set: 6/rtems-net-legacy config: tools/rtems-net-legacy-6.cfg error: config error: rtems-bsp.cfg:104: RTEMS tools not found (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix. Build FAILED Build Set: Time 0:00:00.011935 Build FAILED * So now it needs to find the tools. As such I added the suggested "--rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc": ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc/erc32 --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified) warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake Build Set: 6/rtems-net-legacy config: tools/rtems-net-legacy-6.cfg error: config error: rtems-bsp.cfg:131: RTEMS BSP not found (sparc-rtems6-erc32.pc); Please check the --with-rtems option or --prefix. Build FAILED Build Set: Time 0:00:00.022636 Build FAILED At this point, I'm not sure what to try next. The 'sparc-rtems6-erc32.pc' is located in two places on my system (where the kernel is located). It's either '$HOME/rtems-development/rtems-hello-world/build/sparc-rtems6-erc32/kernel/lib/pkgconfig/sparc-rtems6-erc32.pc' or '$HOME/rtems-development/rtems-hello-world/rtems/build/sparc/erc32/sparc-rtems6-erc32.pc' Thanks in advance for further suggestions. Brett From: Brett Sterling Sent: Thursday, August 17, 2023 9:47 AM To: Gedare Bloom Cc: Vijay Kumar Banerjee ; RTEMS Users RTEMS ; Chris Johns Subject: Re: Networking examples Gedare, Thanks for pointing out that I wasn't specifying a BSP - I will try that later today/tomorrow, along with any other suggestions, and respond. Definitely could be an issue : - ) Thanks, Brett From: Gedare Bloom Sent: Thursday, August 17, 2023 8:57 AM To: Brett Sterling Cc: Vijay Kumar Banerjee ; RTEMS Users RTEMS ; Chris Johns Subject: Re: Networking examples [You don't often get email from ged...@rtems.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ] CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. On Thu, Aug 17, 2023 at 8:54 AM Gedare Bloom wrote: > > hi Brett, > > On Thu, Aug 17, 2023 at 8:12 AM Brett Sterling > wrote: > > > > Hello all, > > > > So I tried a bunch of things and none have worked: > > > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > error: config error: rtems-bsp.cfg:104: RTEMS tools not found > > (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix. > > > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > > error: config error: rtems-bsp.cfg:131: RTEMS BSP not found > > (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. > > > > (so I changed '--with-rtems-bsp=sparc' to '--with-rtems=sparc':) > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > > error: config error: rtems-bsp.cfg:51: No RTEMS BSP specified: > > --with-rtems-bsp
Re: Networking examples
Gedare, Thanks for pointing out that I wasn't specifying a BSP - I will try that later today/tomorrow, along with any other suggestions, and respond. Definitely could be an issue : - ) Thanks, Brett From: Gedare Bloom Sent: Thursday, August 17, 2023 8:57 AM To: Brett Sterling Cc: Vijay Kumar Banerjee ; RTEMS Users RTEMS ; Chris Johns Subject: Re: Networking examples [You don't often get email from ged...@rtems.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ] CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. On Thu, Aug 17, 2023 at 8:54 AM Gedare Bloom wrote: > > hi Brett, > > On Thu, Aug 17, 2023 at 8:12 AM Brett Sterling > wrote: > > > > Hello all, > > > > So I tried a bunch of things and none have worked: > > > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > error: config error: rtems-bsp.cfg:104: RTEMS tools not found > > (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix. > > > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > > error: config error: rtems-bsp.cfg:131: RTEMS BSP not found > > (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. > > > > (so I changed '--with-rtems-bsp=sparc' to '--with-rtems=sparc':) > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > > error: config error: rtems-bsp.cfg:51: No RTEMS BSP specified: > > --with-rtems-bsp=bsp > > > > So I tried with both arguments: > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc --with-rtems=sparc > > error: config error: rtems-bsp.cfg:131: RTEMS BSP not found > > (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. > > > > > > NOTE that all of these options had the sparc tools in the path: > > ~/src/rtems-development/rtems-tools/rtems-source-builder/rtems-net-legacy$ > > echo $PATH > > /home/bsterling/.nvm/versions/node/v16.20.0/bin:/home/bsterling/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/bsterling/src/Toolchains/osr_rtems_6_sparc:/home/bsterling/src/Toolchains/osr_rtems_6_sparc/bin > > > > I understand you are following along > https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fdocs.rtems.org%2Fbranches%2Fmaster%2Flegacy-networking%2Fquick_start.html&data=05%7C01%7C%7Cfa04ba2ce63444c92ac308db9f323ef7%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638278810401317683%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zScqSMWXcMVHIxbW6UN1xLBcSTscuPEN0hO90xfD7Os%3D&reserved=0 > > In there is the command: > ../source-builder/sb-set-builder \ > --prefix=/path/to/rtems/prefix \ > 6/rtems-net-legacy \ > --host=powerpc-rtems6 \ > --with-rtems-bsp=beatnik > > I see you are trying to do this for sparc6, but what BSP are you > wanting to use? "beatnik" is a powerpc BSP. Note: this command example > is wrong with RSB for rtems6, as the --with-rtems-bsp now takes an > arch/bsp pair. @Vijay Kumar Banerjee can you fix? > > The corrected command for you should be something like: > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=?? > > "sparc" is not a BSP. I think that you can use --with-rtems to try to > build all the bsps. > Referring to the (other) quick start: > https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fdocs.rtems.org%2Fbranches%2Fmaster%2Fuser%2Fstart%2Fbsp-build.html%23rsb-bsp-build&data=05%7C01%7C%7Cfa04ba2ce63444c92ac308db9f323ef7%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638278810401317683%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=WXR08F9QrZEX1Ow0Lp70xgaIb%2Bmz5wo%2FVKJCZylgTzA%3D&reserved=0 > > So, maybe, you want --with-rtems-bsp=sparc/leon3 > You can also specify multiple bsps to build. > > I don't think that "--with-rtems"
Re: Networking examples
On Thu, Aug 17, 2023 at 8:54 AM Gedare Bloom wrote: > > hi Brett, > > On Thu, Aug 17, 2023 at 8:12 AM Brett Sterling > wrote: > > > > Hello all, > > > > So I tried a bunch of things and none have worked: > > > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > error: config error: rtems-bsp.cfg:104: RTEMS tools not found > > (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix. > > > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > > error: config error: rtems-bsp.cfg:131: RTEMS BSP not found > > (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. > > > > (so I changed '--with-rtems-bsp=sparc' to '--with-rtems=sparc':) > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > > error: config error: rtems-bsp.cfg:51: No RTEMS BSP specified: > > --with-rtems-bsp=bsp > > > > So I tried with both arguments: > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc --with-rtems=sparc > > error: config error: rtems-bsp.cfg:131: RTEMS BSP not found > > (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. > > > > > > NOTE that all of these options had the sparc tools in the path: > > ~/src/rtems-development/rtems-tools/rtems-source-builder/rtems-net-legacy$ > > echo $PATH > > /home/bsterling/.nvm/versions/node/v16.20.0/bin:/home/bsterling/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/bsterling/src/Toolchains/osr_rtems_6_sparc:/home/bsterling/src/Toolchains/osr_rtems_6_sparc/bin > > > > I understand you are following along > https://docs.rtems.org/branches/master/legacy-networking/quick_start.html > > In there is the command: > ../source-builder/sb-set-builder \ > --prefix=/path/to/rtems/prefix \ > 6/rtems-net-legacy \ > --host=powerpc-rtems6 \ > --with-rtems-bsp=beatnik > > I see you are trying to do this for sparc6, but what BSP are you > wanting to use? "beatnik" is a powerpc BSP. Note: this command example > is wrong with RSB for rtems6, as the --with-rtems-bsp now takes an > arch/bsp pair. @Vijay Kumar Banerjee can you fix? > > The corrected command for you should be something like: > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=?? > > "sparc" is not a BSP. I think that you can use --with-rtems to try to > build all the bsps. > Referring to the (other) quick start: > https://docs.rtems.org/branches/master/user/start/bsp-build.html#rsb-bsp-build > > So, maybe, you want --with-rtems-bsp=sparc/leon3 > You can also specify multiple bsps to build. > > I don't think that "--with-rtems" is a valid command line option to > use. I guess RSB should be a little more noisy about unknown command > line options. > > So, try: > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc/leon3 > Actually, it might be --rtems-bsp= instead of --with-rtems-bsp= I think --rtems-bsp=sparc/leon3 will parse it out to --target=sparc-rtems6 --with-rtems-bsp=leon3 --with-rtems-arch=sparc So, you might try ./source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build \ 6/rtems-net-legacy --host=sparc-rtems6 --rtems-bsp=sparc/leon3 > > > > I look forward to any further suggestions. By the way, as I mentioned, I > > followed the 'Quick Start' procedure in order to get things working (with > > the one issue mentioned before). I have not yet found a full procedure for > > adding in the networking repositorye. We have to use rtems 6 because we > > want C++17 support. > > > > Thanks again in advance. > > > > Brett > > > > > > > > > > > > > > From: Vijay Kumar Banerjee > > Sent: Wednesday, August 16, 2023 4:56 PM > > To: Brett Sterling > > Cc: Joel Sherrill ; RTEMS Users RTEMS ; > > Chris Johns > > Subject: Re: Networking examples > > > > CAUTION: This em
Re: Networking examples
hi Brett, On Thu, Aug 17, 2023 at 8:12 AM Brett Sterling wrote: > > Hello all, > > So I tried a bunch of things and none have worked: > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > error: config error: rtems-bsp.cfg:104: RTEMS tools not found > (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix. > > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > error: config error: rtems-bsp.cfg:131: RTEMS BSP not found > (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. > > (so I changed '--with-rtems-bsp=sparc' to '--with-rtems=sparc':) > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems=sparc > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc > error: config error: rtems-bsp.cfg:51: No RTEMS BSP specified: > --with-rtems-bsp=bsp > > So I tried with both arguments: > ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build > 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc > --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc --with-rtems=sparc > error: config error: rtems-bsp.cfg:131: RTEMS BSP not found > (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. > > > NOTE that all of these options had the sparc tools in the path: > ~/src/rtems-development/rtems-tools/rtems-source-builder/rtems-net-legacy$ > echo $PATH > /home/bsterling/.nvm/versions/node/v16.20.0/bin:/home/bsterling/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/bsterling/src/Toolchains/osr_rtems_6_sparc:/home/bsterling/src/Toolchains/osr_rtems_6_sparc/bin > I understand you are following along https://docs.rtems.org/branches/master/legacy-networking/quick_start.html In there is the command: ../source-builder/sb-set-builder \ --prefix=/path/to/rtems/prefix \ 6/rtems-net-legacy \ --host=powerpc-rtems6 \ --with-rtems-bsp=beatnik I see you are trying to do this for sparc6, but what BSP are you wanting to use? "beatnik" is a powerpc BSP. Note: this command example is wrong with RSB for rtems6, as the --with-rtems-bsp now takes an arch/bsp pair. @Vijay Kumar Banerjee can you fix? The corrected command for you should be something like: ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=?? "sparc" is not a BSP. I think that you can use --with-rtems to try to build all the bsps. Referring to the (other) quick start: https://docs.rtems.org/branches/master/user/start/bsp-build.html#rsb-bsp-build So, maybe, you want --with-rtems-bsp=sparc/leon3 You can also specify multiple bsps to build. I don't think that "--with-rtems" is a valid command line option to use. I guess RSB should be a little more noisy about unknown command line options. So, try: ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc/leon3 > > I look forward to any further suggestions. By the way, as I mentioned, I > followed the 'Quick Start' procedure in order to get things working (with the > one issue mentioned before). I have not yet found a full procedure for > adding in the networking repositorye. We have to use rtems 6 because we want > C++17 support. > > Thanks again in advance. > > Brett > > > > > > > From: Vijay Kumar Banerjee > Sent: Wednesday, August 16, 2023 4:56 PM > To: Brett Sterling > Cc: Joel Sherrill ; RTEMS Users RTEMS ; > Chris Johns > Subject: Re: Networking examples > > CAUTION: This email originated from outside of the organization. Do not click > links or open attachments unless you recognize the sender and know the > content is safe. > > > On Wed, Aug 16, 2023 at 12:13 PM Brett Sterling > wrote: > > > > First off, I want to thank everyone for the fast replies. Second, I want > > to apologize for the delay responding to the questions - I plan to do > > better going forward. > > > > Here are the responses to the various questions below. If you'd rather I > > interlace them in the responses, I'm glad to do so (but didn't want it to > > get too messy :-)). > > > > None of the RTEMS tools are in my path - we specify locations when doing > > builds (i.e. would like to specify this as a parameter to the build) > > My tools (e.g. sparc-rtems6-gcc) a
Re: Networking examples
Hello all, So I tried a bunch of things and none have worked: ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc error: config error: rtems-bsp.cfg:104: RTEMS tools not found (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix. ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc error: config error: rtems-bsp.cfg:131: RTEMS BSP not found (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. (so I changed '--with-rtems-bsp=sparc' to '--with-rtems=sparc':) ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems=sparc --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc error: config error: rtems-bsp.cfg:51: No RTEMS BSP specified: --with-rtems-bsp=bsp So I tried with both arguments: ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc --with-rtems=sparc error: config error: rtems-bsp.cfg:131: RTEMS BSP not found (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. NOTE that all of these options had the sparc tools in the path: ~/src/rtems-development/rtems-tools/rtems-source-builder/rtems-net-legacy$ echo $PATH /home/bsterling/.nvm/versions/node/v16.20.0/bin:/home/bsterling/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/bsterling/src/Toolchains/osr_rtems_6_sparc:/home/bsterling/src/Toolchains/osr_rtems_6_sparc/bin I look forward to any further suggestions. By the way, as I mentioned, I followed the 'Quick Start' procedure in order to get things working (with the one issue mentioned before). I have not yet found a full procedure for adding in the networking repositorye. We have to use rtems 6 because we want C++17 support. Thanks again in advance. Brett From: Vijay Kumar Banerjee Sent: Wednesday, August 16, 2023 4:56 PM To: Brett Sterling Cc: Joel Sherrill ; RTEMS Users RTEMS ; Chris Johns Subject: Re: Networking examples CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. On Wed, Aug 16, 2023 at 12:13 PM Brett Sterling wrote: > > First off, I want to thank everyone for the fast replies. Second, I want to > apologize for the delay responding to the questions - I plan to do better > going forward. > > Here are the responses to the various questions below. If you'd rather I > interlace them in the responses, I'm glad to do so (but didn't want it to get > too messy :-)). > > None of the RTEMS tools are in my path - we specify locations when doing > builds (i.e. would like to specify this as a parameter to the build) > My tools (e.g. sparc-rtems6-gcc) are located at: > $HOME/src/Toolchains/osr_rtems_6_sparc/bin You can add the tools path using: --rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc If that doesn't work, would it be possible to add "$HOME/src/Toolchains/osr_rtems_6_sparc/bin" into your path using `export` temporarily just to check if that works? > My kernel is at: > $HOME/src/rtems-development/rtems-hello-world/build/sparc-rtems6-erc32/kernel > I'm trying to build for sparc on RTEMS 6 (probably obvious from the previous > pieces of information) > I'm building on a linux host (cross-building for sparc) > I'm using the sparc-rtems6-sis (i.e. the sparc simulator) to test the build > With the workaround for issue with the 'Quick Start' process, I can run the > "Hello World" example (from the "Quick Start"). Is this what was being > referred to with the question "Can you run hello world?", or is there another > "hello world" that I should try? Great. The RTEMS tools are correctly built then, the issue seems to be coming from the command line options. You can also use the `--help` option to see all the options with a brief description with sb-set-builder `../source-builder/sb-set-builder --help` > Per the question "Can you build the rtems-examples from that repository?", > can someone clarify which 'repository' that's referring to? Regardless, the > answer is "I haven't tried, but I'm glad to give it a shot if there is > information somewhere about how to do this". > `rtems-examples` is a separate repository where we have some example applications that can be used as a reference or starting point for user applica
Re: Networking examples
On Wed, Aug 16, 2023 at 12:13 PM Brett Sterling
wrote:
>
> First off, I want to thank everyone for the fast replies. Second, I want to
> apologize for the delay responding to the questions - I plan to do better
> going forward.
>
> Here are the responses to the various questions below. If you'd rather I
> interlace them in the responses, I'm glad to do so (but didn't want it to get
> too messy :-)).
>
> None of the RTEMS tools are in my path - we specify locations when doing
> builds (i.e. would like to specify this as a parameter to the build)
> My tools (e.g. sparc-rtems6-gcc) are located at:
> $HOME/src/Toolchains/osr_rtems_6_sparc/bin
You can add the tools path using:
--rtems-tools=$HOME/src/Toolchains/osr_rtems_6_sparc
If that doesn't work, would it be possible to add
"$HOME/src/Toolchains/osr_rtems_6_sparc/bin" into your path using
`export` temporarily just to check if that works?
> My kernel is at:
> $HOME/src/rtems-development/rtems-hello-world/build/sparc-rtems6-erc32/kernel
> I'm trying to build for sparc on RTEMS 6 (probably obvious from the previous
> pieces of information)
> I'm building on a linux host (cross-building for sparc)
> I'm using the sparc-rtems6-sis (i.e. the sparc simulator) to test the build
> With the workaround for issue with the 'Quick Start' process, I can run the
> "Hello World" example (from the "Quick Start"). Is this what was being
> referred to with the question "Can you run hello world?", or is there another
> "hello world" that I should try?
Great. The RTEMS tools are correctly built then, the issue seems to be
coming from the command line options.
You can also use the `--help` option to see all the options with a
brief description with sb-set-builder
`../source-builder/sb-set-builder --help`
> Per the question "Can you build the rtems-examples from that repository?",
> can someone clarify which 'repository' that's referring to? Regardless, the
> answer is "I haven't tried, but I'm glad to give it a shot if there is
> information somewhere about how to do this".
>
`rtems-examples` is a separate repository where we have some example
applications that can be used as a reference or starting point for
user application development. Please refer to the following
repository:
https://git.rtems.org/rtems-examples/
Best regards,
Vijay
> Thanks in advance,
> Brett
>
>
>
>
>
>
>
> From: Vijay Kumar Banerjee
> Sent: Tuesday, August 15, 2023 12:53 PM
> To: Joel Sherrill
> Cc: Brett Sterling ; RTEMS Users RTEMS
> ; Chris Johns
> Subject: Re: Networking examples
>
> CAUTION: This email originated from outside of the organization. Do not click
> links or open attachments unless you recognize the sender and know the
> content is safe.
>
>
>
> On Tue, Aug 15, 2023, 13:10 Joel Sherrill wrote:
>
>
>
> On Tue, Aug 15, 2023 at 11:57 AM Brett Sterling
> wrote:
>
> Hello all!
>
> To get this out of the way prior to all of the requested debugging
> information - I don't need the legacy stack, any networking stack will do. I
> started with legacy because that was what was shown on the RTEMS
> documentation pages. We're trying to integrate RTEMS into our system and I
> considered adding the networking stack that had some documentation a big
> enough effort without perhaps trying to integrate another network stack. But
> I'm absolutely glad to go with any suggestion.
>
>
> Now, onto the requested build failure information.
>
> Following
> https://docs.rtems.org/branches/master/legacy-networking/quick_start.html
>
> ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build
> 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc
> RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified)
> warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake
> Build Set: 6/rtems-net-legacy
> config: tools/rtems-net-legacy-6.cfg
> error: config error: rtems-bsp.cfg:104: RTEMS tools not found
> (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix.
> Build FAILED
> Build Set: Time 0:00:00.012407
> Build FAILED
>
> The error information implies that '--prefix' should specify where the
> 'sparc-rtems6-gcc' should be located, so I tried something different
> (specifying where the build tools are located).
>
>
> The prefix is where it will be installed. Normally${prefix}/bin/ will contain
> your cross tools.
>
> --rtems-tools path : Path to an install RTEMS tool set
>
> And your --with-rtems-bsp is just the architecture
Re: Networking examples
First off, I want to thank everyone for the fast replies. Second, I want to
apologize for the delay responding to the questions - I plan to do better going
forward.
Here are the responses to the various questions below. If you'd rather I
interlace them in the responses, I'm glad to do so (but didn't want it to get
too messy :-)).
* None of the RTEMS tools are in my path - we specify locations when doing
builds (i.e. would like to specify this as a parameter to the build)
* My tools (e.g. sparc-rtems6-gcc) are located at:
$HOME/src/Toolchains/osr_rtems_6_sparc/bin
* My kernel is at:
$HOME/src/rtems-development/rtems-hello-world/build/sparc-rtems6-erc32/kernel
* I'm trying to build for sparc on RTEMS 6 (probably obvious from the
previous pieces of information)
* I'm building on a linux host (cross-building for sparc)
* I'm using the sparc-rtems6-sis (i.e. the sparc simulator) to test the
build
* With the workaround for issue with the 'Quick Start' process, I can run
the "Hello World" example (from the "Quick Start"). Is this what was being
referred to with the question "Can you run hello world?", or is there another
"hello world" that I should try?
* Per the question "Can you build the rtems-examples from that
repository?", can someone clarify which 'repository' that's referring to?
Regardless, the answer is "I haven't tried, but I'm glad to give it a shot if
there is information somewhere about how to do this".
Thanks in advance,
Brett
From: Vijay Kumar Banerjee
Sent: Tuesday, August 15, 2023 12:53 PM
To: Joel Sherrill
Cc: Brett Sterling ; RTEMS Users RTEMS
; Chris Johns
Subject: Re: Networking examples
CAUTION: This email originated from outside of the organization. Do not click
links or open attachments unless you recognize the sender and know the content
is safe.
On Tue, Aug 15, 2023, 13:10 Joel Sherrill
mailto:j...@rtems.org>> wrote:
On Tue, Aug 15, 2023 at 11:57 AM Brett Sterling
mailto:brett.sterl...@odysseysr.com>> wrote:
Hello all!
To get this out of the way prior to all of the requested debugging information
- I don't need the legacy stack, any networking stack will do. I started with
legacy because that was what was shown on the RTEMS documentation pages. We're
trying to integrate RTEMS into our system and I considered adding the
networking stack that had some documentation a big enough effort without
perhaps trying to integrate another network stack. But I'm absolutely glad to
go with any suggestion.
Now, onto the requested build failure information.
Following
https://docs.rtems.org/branches/master/legacy-networking/quick_start.html<https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fdocs.rtems.org%2Fbranches%2Fmaster%2Flegacy-networking%2Fquick_start.html&data=05%7C01%7C%7C096144b9e5824cc8c1d808db9dc0e307%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638277224010139137%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=wLKG%2FGJMSBzyFZnjDCBhXAGCutrx6iu4Uazy90YVHag%3D&reserved=0>
../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build
6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc
RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified)
warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake
Build Set: 6/rtems-net-legacy
config: tools/rtems-net-legacy-6.cfg
error: config error: rtems-bsp.cfg:104: RTEMS tools not found
(sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix.
Build FAILED
Build Set: Time 0:00:00.012407
Build FAILED
The error information implies that '--prefix' should specify where the
'sparc-rtems6-gcc' should be located, so I tried something different
(specifying where the build tools are located).
The prefix is where it will be installed. Normally${prefix}/bin/ will contain
your cross tools.
--rtems-tools path : Path to an install RTEMS tool set
And your --with-rtems-bsp is just the architecture. It would need to be
something like sparc/leon3.
Have you built the tools? Is sparc-rtems6-gcc in your $PATH? Can you run hello
world?
And --host normally denotes the host os where you are building. You usually
want --target.
@Vijay should be able to confirm that for sure. I don't think I have built the
legacy stack this way recently.
I agree with the suggestions above. I am able to reproduce this error with
wrong prefix. The following command works for me for a different board:
`../source-builder/sb-set-builder --prefix=$PATH_TO_DIR_WITH_BIN
--with-rtems-bsp=powerpc/mvme2700 6/rtems-net-legacy`
I have the rtems toolset installed in this prefix path.
prefix=$HOME/src/Toolchains/osr_rtems_6_sparc 6/rtems-net-leg
Re: Networking examples
On Tue, Aug 15, 2023, 13:10 Joel Sherrill wrote:
>
>
> On Tue, Aug 15, 2023 at 11:57 AM Brett Sterling <
> brett.sterl...@odysseysr.com> wrote:
>
>> Hello all!
>>
>> To get this out of the way prior to all of the requested debugging
>> information - I don't need the legacy stack, any networking stack will do.
>> I started with legacy because that was what was shown on the RTEMS
>> documentation pages. We're trying to integrate RTEMS into our system and I
>> considered adding the networking stack that had some documentation a big
>> enough effort without perhaps trying to integrate another network stack.
>> But I'm absolutely glad to go with any suggestion.
>>
>>
>> Now, onto the requested build failure information.
>>
>> Following
>> https://docs.rtems.org/branches/master/legacy-networking/quick_start.html
>>
>> ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build
>> 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc
>> RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified)
>> warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake
>> Build Set: 6/rtems-net-legacy
>> config: tools/rtems-net-legacy-6.cfg
>> error: config error: rtems-bsp.cfg:104: RTEMS tools not found
>> (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix.
>> Build FAILED
>> Build Set: Time 0:00:00.012407
>> Build FAILED
>>
>> The error information implies that '--prefix' should specify where the
>> 'sparc-rtems6-gcc' should be located, so I tried something different
>> (specifying where the build tools are located).
>>
>
> The prefix is where it will be installed. Normally${prefix}/bin/ will
> contain your cross tools.
>
> --rtems-tools path : Path to an install RTEMS tool set
>
> And your --with-rtems-bsp is just the architecture. It would need to be
> something like sparc/leon3.
>
> Have you built the tools? Is sparc-rtems6-gcc in your $PATH? Can you run
> hello world?
>
> And --host normally denotes the host os where you are building. You
> usually want --target.
>
> @Vijay should be able to confirm that for sure. I don't think I have built
> the legacy stack this way recently.
>
I agree with the suggestions above. I am able to reproduce this error with
wrong prefix. The following command works for me for a different board:
`../source-builder/sb-set-builder --prefix=$PATH_TO_DIR_WITH_BIN
--with-rtems-bsp=powerpc/mvme2700 6/rtems-net-legacy`
I have the rtems toolset installed in this prefix path.
>
>
>> prefix=$HOME/src/Toolchains/osr_rtems_6_sparc 6/rtems-net-legacy
>> --host=sparc-rtems6 --with-rtems-bsp=sparc
>> RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified)
>> warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake
>> Build Set: 6/rtems-net-legacy
>> config: tools/rtems-net-legacy-6.cfg
>> error: config error: rtems-bsp.cfg:131: RTEMS BSP not found
>> (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix.
>>
>>
> You have to build RTEMS and install it. The dot pc file has a pattern
> like this for the powerpc/psim BSP I had installed
>
>
> /home/joel/rtems-work/tools/6/bsp-install/lib/pkgconfig/powerpc-rtems6-psim.pc
>
> prefix to RTEMS
> configure/install: /home/joel/rtems-work/tools/6/bsp-install/
>
> Note that yours would be something like sparc-rtems6-leon3.pc.
>
>
+1
Build FAILED
>> Build Set: Time 0:00:00.014283
>> Build FAILED
>>
>> What I'm guessing is that the networking build still relies on everything
>> being in the correct location, but the documentation doesn't indicate where
>> the networking repository should be put and how the networking build fits
>> in with the tools build and the application builds. This is probably the
>> information I'm currently lacking. Then again, I may be missing something
>> in the documentation that I erroneously overlooked. If so, just let me
>> know.
>>
>> The "Hello World" failure is documented in this ticket:
>> https://devel.rtems.org/ticket/4927
>>
>
> OK. I dhave added Chris who I think wrote that section.
>
> Can you build the rtems-examples from that repository?
>
> --joel
>
>
>>
>> Thanks again in advance!
>> Brett
>>
>>
>>
>> --
>> *From:* Joel Sherrill
>> *Sent:* Tuesday, August 15, 2023 9:57 AM
>> *To:* Brett Sterling
>> *Cc:* users@rtems.org ; Vijay Kumar Banerjee <
>> vi...@rtems.org>
>> *Subje
Re: Networking examples
On Tue, Aug 15, 2023 at 11:57 AM Brett Sterling <
brett.sterl...@odysseysr.com> wrote:
> Hello all!
>
> To get this out of the way prior to all of the requested debugging
> information - I don't need the legacy stack, any networking stack will do.
> I started with legacy because that was what was shown on the RTEMS
> documentation pages. We're trying to integrate RTEMS into our system and I
> considered adding the networking stack that had some documentation a big
> enough effort without perhaps trying to integrate another network stack.
> But I'm absolutely glad to go with any suggestion.
>
>
> Now, onto the requested build failure information.
>
> Following
> https://docs.rtems.org/branches/master/legacy-networking/quick_start.html
>
> ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build
> 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc
> RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified)
> warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake
> Build Set: 6/rtems-net-legacy
> config: tools/rtems-net-legacy-6.cfg
> error: config error: rtems-bsp.cfg:104: RTEMS tools not found
> (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix.
> Build FAILED
> Build Set: Time 0:00:00.012407
> Build FAILED
>
> The error information implies that '--prefix' should specify where the
> 'sparc-rtems6-gcc' should be located, so I tried something different
> (specifying where the build tools are located).
>
The prefix is where it will be installed. Normally${prefix}/bin/ will
contain your cross tools.
--rtems-tools path : Path to an install RTEMS tool set
And your --with-rtems-bsp is just the architecture. It would need to be
something like sparc/leon3.
Have you built the tools? Is sparc-rtems6-gcc in your $PATH? Can you run
hello world?
And --host normally denotes the host os where you are building. You usually
want --target.
@Vijay should be able to confirm that for sure. I don't think I have built
the legacy stack this way recently.
> prefix=$HOME/src/Toolchains/osr_rtems_6_sparc 6/rtems-net-legacy
> --host=sparc-rtems6 --with-rtems-bsp=sparc
> RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified)
> warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake
> Build Set: 6/rtems-net-legacy
> config: tools/rtems-net-legacy-6.cfg
> error: config error: rtems-bsp.cfg:131: RTEMS BSP not found
> (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix.
>
>
You have to build RTEMS and install it. The dot pc file has a pattern like
this for the powerpc/psim BSP I had installed
/home/joel/rtems-work/tools/6/bsp-install/lib/pkgconfig/powerpc-rtems6-psim.pc
prefix to RTEMS
configure/install: /home/joel/rtems-work/tools/6/bsp-install/
Note that yours would be something like sparc-rtems6-leon3.pc.
> Build FAILED
> Build Set: Time 0:00:00.014283
> Build FAILED
>
> What I'm guessing is that the networking build still relies on everything
> being in the correct location, but the documentation doesn't indicate where
> the networking repository should be put and how the networking build fits
> in with the tools build and the application builds. This is probably the
> information I'm currently lacking. Then again, I may be missing something
> in the documentation that I erroneously overlooked. If so, just let me
> know.
>
> The "Hello World" failure is documented in this ticket:
> https://devel.rtems.org/ticket/4927
>
OK. I dhave added Chris who I think wrote that section.
Can you build the rtems-examples from that repository?
--joel
>
> Thanks again in advance!
> Brett
>
>
>
> --
> *From:* Joel Sherrill
> *Sent:* Tuesday, August 15, 2023 9:57 AM
> *To:* Brett Sterling
> *Cc:* users@rtems.org ; Vijay Kumar Banerjee <
> vi...@rtems.org>
> *Subject:* Re: Networking examples
>
> CAUTION: This email originated from outside of the organization. Do not
> click links or open attachments unless you recognize the sender and know
> the content is safe.
>
> I add Vijay since he has been working with this.
>
> On Tue, Aug 15, 2023 at 9:27 AM Brett Sterling <
> brett.sterl...@odysseysr.com> wrote:
>
> Hello all,
>
> My goal is to integrate networking into our RTEMS solution, so I started
> here: https://docs.rtems.org/branches/master/legacy-networking/index.html
> <https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fdocs.rtems.org%2Fbranches%2Fmaster%2Flegacy-networking%2Findex.html&data=05%7C01%7C%7Ca986447e0b18401e8d8108db9da85b8c%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638277118637201789%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjA
Re: Networking examples
Hello all! To get this out of the way prior to all of the requested debugging information - I don't need the legacy stack, any networking stack will do. I started with legacy because that was what was shown on the RTEMS documentation pages. We're trying to integrate RTEMS into our system and I considered adding the networking stack that had some documentation a big enough effort without perhaps trying to integrate another network stack. But I'm absolutely glad to go with any suggestion. Now, onto the requested build failure information. Following https://docs.rtems.org/branches/master/legacy-networking/quick_start.html ../source-builder/sb-set-builder --prefix=$HOME/src/rtems-net-build 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified) warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake Build Set: 6/rtems-net-legacy config: tools/rtems-net-legacy-6.cfg error: config error: rtems-bsp.cfg:104: RTEMS tools not found (sparc-rtems6-gcc) found; Please check the --with-tools option or --prefix. Build FAILED Build Set: Time 0:00:00.012407 Build FAILED The error information implies that '--prefix' should specify where the 'sparc-rtems6-gcc' should be located, so I tried something different (specifying where the build tools are located). prefix=$HOME/src/Toolchains/osr_rtems_6_sparc 6/rtems-net-legacy --host=sparc-rtems6 --with-rtems-bsp=sparc RTEMS Source Builder - Set Builder, 6 (8e568b2ca348 modified) warning: exe: absolute exe found in path: (__cmake) /usr/bin/cmake Build Set: 6/rtems-net-legacy config: tools/rtems-net-legacy-6.cfg error: config error: rtems-bsp.cfg:131: RTEMS BSP not found (sparc-rtems6-sparc.pc); Please check the --with-rtems option or --prefix. Build FAILED Build Set: Time 0:00:00.014283 Build FAILED What I'm guessing is that the networking build still relies on everything being in the correct location, but the documentation doesn't indicate where the networking repository should be put and how the networking build fits in with the tools build and the application builds. This is probably the information I'm currently lacking. Then again, I may be missing something in the documentation that I erroneously overlooked. If so, just let me know. The "Hello World" failure is documented in this ticket: https://devel.rtems.org/ticket/4927 Thanks again in advance! Brett From: Joel Sherrill Sent: Tuesday, August 15, 2023 9:57 AM To: Brett Sterling Cc: users@rtems.org ; Vijay Kumar Banerjee Subject: Re: Networking examples CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. I add Vijay since he has been working with this. On Tue, Aug 15, 2023 at 9:27 AM Brett Sterling mailto:brett.sterl...@odysseysr.com>> wrote: Hello all, My goal is to integrate networking into our RTEMS solution, so I started here: https://docs.rtems.org/branches/master/legacy-networking/index.html<https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fdocs.rtems.org%2Fbranches%2Fmaster%2Flegacy-networking%2Findex.html&data=05%7C01%7C%7Ca986447e0b18401e8d8108db9da85b8c%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638277118637201789%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=O7Cl3JjG1IGmeX5TzhEdb65bNPtvrK%2BF4Zzqtlw5Zhk%3D&reserved=0>. But, as soon as I had started, I hit a failure. I tried the 'quick start' (https://docs.rtems.org/branches/master/legacy-networking/quick_start.html<https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fdocs.rtems.org%2Fbranches%2Fmaster%2Flegacy-networking%2Fquick_start.html&data=05%7C01%7C%7Ca986447e0b18401e8d8108db9da85b8c%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638277118637358041%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=gCplMFshN695pxIZnLZlIxdIjfO9mkjZXsOzmm8R45s%3D&reserved=0>), but regardless of which way I tried to build, the build failed. Please post about that. This shouldn't happen. And Vijay has recent experience testing the legacy stack. Based on the failure of the 'quick-start' for the RTEMS "Hello World" example coupled with this failure, I'm starting to consider moving back to an older RTEMS version (I've seen networking information for both RTEMS 4 & 5), but first wanted to reach out to the user community to get input. Let's see how this failed. Optimally, I would like to find an RTEMS example (any version) WITH NETWORKING that runs on either an RTEMS simulator, or on a commercially available development board so that I can see networking working and then evolve it into my
Re: Networking examples
I add Vijay since he has been working with this. On Tue, Aug 15, 2023 at 9:27 AM Brett Sterling wrote: > Hello all, > > My goal is to integrate networking into our RTEMS solution, so I started > here: https://docs.rtems.org/branches/master/legacy-networking/index.html. > > But, as soon as I had started, I hit a failure. I tried the 'quick start' > (https://docs.rtems.org/branches/master/legacy-networking/quick_start.html), > but regardless of which way I tried to build, the build failed. > Please post about that. This shouldn't happen. And Vijay has recent experience testing the legacy stack. > Based on the failure of the 'quick-start' for the RTEMS "Hello World" > example coupled with this failure, I'm starting to consider moving back to > an older RTEMS version (I've seen networking information for both RTEMS 4 & > 5), but first wanted to reach out to the user community to get input. > Let's see how this failed. > > Optimally, I would like to find an RTEMS example (any version) *WITH > NETWORKING* that runs on either an RTEMS simulator, or on a commercially > available development board so that I can see networking working and then > evolve it into my system. > Do you really want the legacy stack or just a network stack? > > Less optimally, I would like to find an RTEMS example (any version) *WITH > NETWORKING* that at least completely builds. > > If no one has examples of these, I would be glad to try different things > to get the networking stuff building. Especially if someone else can show > that they can build with networking. > > Thanks in advance! > Brett > > ___ > users mailing list > users@rtems.org > http://lists.rtems.org/mailman/listinfo/users > ___ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
Networking examples
Hello all, My goal is to integrate networking into our RTEMS solution, so I started here: https://docs.rtems.org/branches/master/legacy-networking/index.html. But, as soon as I had started, I hit a failure. I tried the 'quick start' (https://docs.rtems.org/branches/master/legacy-networking/quick_start.html), but regardless of which way I tried to build, the build failed. Based on the failure of the 'quick-start' for the RTEMS "Hello World" example coupled with this failure, I'm starting to consider moving back to an older RTEMS version (I've seen networking information for both RTEMS 4 & 5), but first wanted to reach out to the user community to get input. Optimally, I would like to find an RTEMS example (any version) WITH NETWORKING that runs on either an RTEMS simulator, or on a commercially available development board so that I can see networking working and then evolve it into my system. Less optimally, I would like to find an RTEMS example (any version) WITH NETWORKING that at least completely builds. If no one has examples of these, I would be glad to try different things to get the networking stuff building. Especially if someone else can show that they can build with networking. Thanks in advance! Brett ___ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
