[vdr] PCI GT610 vdpau card - 512 MB or 1GB memory ?
Hello is there any sense to buy PCI GT610 card with 1 GB memory for processing of 1080i/p HD video ? may be 512 MB will be enough ? I plan to use vdpau decoding of HD video + temporal spatial deinterlacing + upscaling of SD video. Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] PCI GT610 vdpau card - 512 MB or 1GB memory ?
how do you monitor video-memory consumption ? with nvidia-smi ? is there any sense to buy PCI GT610 card with 1 GB memory for processing of 1080i/p HD video ? may be 512 MB will be enough ? I plan to use vdpau decoding of HD video + temporal spatial deinterlacing + upscaling of SD video. I'm seeing around 250M total memory use while decoding and deinterlacing 1080i to a single 1080 display. Composite extension completely disabled since all it does is cause tearing and eat memory like crazy. If all you need is video playback on that system then 512M is more than plenty. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDPAU for AMD
That is cool news. Next question, which AMD APU will support temporal-spatial deinterlacing of 1080i at full framerate? and high quality upscaling as well Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] multistream support in VDR
Recently in kernel was added full multistream support (DTV_STREAM_ID) https://patchwork.kernel.org/patch/1351421/ is there any plans to implement multistream support in vdr ? DTV_STREAM_ID is already used in VDR for DVB-T2. what about DTV_STREAM_ID for dvb-s2 ? Which parameter would go in there, and where would it come from? parameter P in channels.conf for identification of sub-stream WeddingTV;Tivuitalia:11914:HM5S1P2:S31.5E:27500:1026:1027=ita:0:0:4:8572:972:0 and small patch from crazycat for VDR 1.7.35 Have you tested this and does it actually work? no, I have not tested As Manu mentioned - my cx24116 based hvr4000 dvb-s2 card doesn't support multistream Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] multistream support in VDR
Hi Recently in kernel was added full multistream support (DTV_STREAM_ID) https://patchwork.kernel.org/patch/1351421/ is there any plans to implement multistream support in vdr ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] multistream support in VDR
Recently in kernel was added full multistream support (DTV_STREAM_ID) https://patchwork.kernel.org/patch/1351421/ is there any plans to implement multistream support in vdr ? DTV_STREAM_ID is already used in VDR for DVB-T2. what about DTV_STREAM_ID for dvb-s2 ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] multistream support in VDR
Recently in kernel was added full multistream support (DTV_STREAM_ID) https://patchwork.kernel.org/patch/1351421/ is there any plans to implement multistream support in vdr ? DTV_STREAM_ID is already used in VDR for DVB-T2. The current DVB-T2 support is with CXD2820. CXD2820 supports only a single TS. The only demodulators in kernel that supports Multiple Input Stream (MIS) are the STV0900 and the STV0903. yes. But what do you think about cx24116 - is it possible to patch cx24116 driver/firmware for multistream support ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] multistream support in VDR
Recently in kernel was added full multistream support (DTV_STREAM_ID) https://patchwork.kernel.org/patch/1351421/ is there any plans to implement multistream support in vdr ? DTV_STREAM_ID is already used in VDR for DVB-T2. The current DVB-T2 support is with CXD2820. CXD2820 supports only a single TS. The only demodulators in kernel that supports Multiple Input Stream (MIS) are the STV0900 and the STV0903. yes. But what do you think about cx24116 - is it possible to patch cx24116 driver/firmware for multistream support ? @Goga: can you explain in just a few words what exactly Multiple Input Stream is, The multistream is part of dvb-s2 standard. The main idea is on ONE carrier can exist several independed transport streams. Each stream can exist as separated TS stream with channels. more details here are http://www.newtec.eu/applications/broadcast/multistream-or-efficient-satellite-distribution-of-terrestrial-tv-and-mobile-tv-content/ and if there are any DVB-S2 channels (here in Europe) that actually use this? yes, Tivuitalia http://www.lyngsat.com/Astra-1G.html freq 11914 Ukraian provider ZeonBund http://www.lyngsat.com/Astra-1G.html freq 11992 H Mediaset http://www.lyngsat.com/Eutelsat-Hot-Bird-13A-13B-13C.html 11432 V 12539 H ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] multistream support in VDR
FYI there are patched for multistream scan-s2 szap-s2 http://www.tbsdtv.com/forum/viewtopic.php?f=26t=1874 + multistream patch for dvblast http://mailman.videolan.org/pipermail/dvblast-devel/2012-October/001122.html ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Replacing aging VDR for DVB-S2
In general, get a gt220, as it has built in audio hardware, so that you should get audio without clock drift relative to the hdmi output. It is also powerfull enough to do temporal spatial deinterlacing on 1080i material. what do you think about NVIDIA's GeForce GT 430 http://www.anandtech.com/show/3973/nvidias-geforce-gt-430 seems it's the best choice for vdr/htpc - more cold than gt220 - more powerfull - HDMI 1.4, - 3D over HDMI - Ethernet channel - Audio return channel - 4k × 2k Resolution Support -- Удачи, Игорь ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan not working with empty channels.conf!
I tested reelchannelscan on my vdr-1.7.15 and had problems with it. It crashs when using it with empty channels.conf, because it need a tuned channel before scanning. When started with an empty channels.conf there is no channel tuned and the plugin gets no valid initial channel data. Do we have a fix for that issue? Who does maintain an oficial (vdr) compatible version of the plugin? imho - nobody have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/ it can scan dvb-s2 channels (see the discussion in vdr list about this plugin) -- Удачи, Игорь ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan not working with empty channels.conf!
a777 ha escrit: I tested reelchannelscan on my vdr-1.7.15 and had problems with it. It crashs when using it with empty channels.conf, because it need a tuned channel before scanning. When started with an empty channels.conf there is no channel tuned and the plugin gets no valid initial channel data. Do we have a fix for that issue? Who does maintain an oficial (vdr) compatible version of the plugin? imho - nobody have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/ it can scan dvb-s2 channels (see the discussion in vdr list about this plugin) Though I don't have the hardware to test dvb-s2 and I never tried with an empty channels.conf. yes, your plugin is working well with dvb-s2 transponders, tested with vdr 1.7.16 thank you very much for your scaner -- Удачи, Игорь ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] vdr-actuator-1.2.0 plugin
From this version it is also possible to use the plugin without an actuator, i.e. as a channel scanner only. does it mean, that with your plugin no need to use reelchannelscan plugin for creating/updating channels.conf ? Yes, but I could only test it with plain dvb-s, no dvb-s2. Also, it doesn't to a blind scan, it needs a transponder.ini file for each satellite that you want to scan. does the sources of scaner based on reelchanellscan plugin ? Why don't release the scaner as separete plugin ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] vdr-actuator-1.2.0 plugin
From this version it is also possible to use the plugin without an actuator, i.e. as a channel scanner only. does it mean, that with your plugin no need to use reelchannelscan plugin for creating/updating channels.conf ? Note that it only compiles with the current development version of vdr. The changes: - Version for current development version of vdr (= 1.7.15) - DVB-S2 support (untested, I don't have DVB-S2 hardware) - Experimental seractuator module (uses a serial port instead of a parallel port) - Complete rewrite of the channel scanner - The plugin can now work without an actuator (i.e. as a channel scanner only) with the command line option -s or --scanonly ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] cSdtFIlter and LinkChannels
I'm trying to understand cSdtFilter in order to write a channel scanner. will it the plugin for vdr with possibility to scan dvb-s2 channels ? Goga I see that when it finds a SI::NVODReferenceDescriptorTag it will add it to the previously found channel with channel-SetLinkChannels, but it only does if it is in the current section (channel is a local variable) while the sdt could span several sections. From the specifications here http://neuron2.net/library/mpeg2/iso13818-1.pdf and here http://www.dvb.org/technology/standards/a005r5.tm1324r13.tr101211.v1.10.1.pdf I don't understand if this mechanism is correct, shouldn't the time_shifted_services link to the NVOD_reference? Besides, I don't see that the relation between a channels and its linkchannels is preserved in channels.conf (though I don't really care). I also see that cSdtFilter starts processing with the first section, and that shouldn't really be necessary as long as one processes all sections. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Advice on new motherboard, xinelibou tput, vdpau,hdmi video audio, etc.
to verify. Even the Xorg.0.log lies about the fact that 50Hz are active but in reality it uses 60Hz. Maybe nVidia has fixed that in the meantime. To watch HD broadcasts I use the hdmi output on my laptop. It isn't configured in xorg but I just configure it on the fly with nvidia-settings in twin-view mode (the laptop panel at 60Hz and the hdmi port at 50Hz). Provided that I disable Force Full GPU Scaling, the tv reports a 50Hz signal. if you disabled full gpu scaling , how upscaling will work really ? what and how will upscale SD video to 1080p ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Advice on new motherboard, xinelibou tput, vdpau,hdmi video audio, etc.
if you disabled full gpu scaling , how upscaling will work really ? what and how will upscale SD video to 1080p ? This setting is only useful if your display device can't scale on its own or the scaling is worse quality. If you enable it the card will always output native resolution at native refresh. If disabled the gpu will not touch the mode and output whatever you tell it to, in which case the display itself will have to scale the mode as needed. let's have a look on the following situation. I have full HD TV set, which of course can upscale. TV My xorg.conf has default mode - 1080p can be 2 situation With vdr and vdr-xine I'm watching SD 576i channels and after that I switch to HD 1080i channel. Does graphic card do upscale in first variant (with SD channel) ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.
btw, have a look on new ASRock Core 100HT NetTop http://www.phoronix.com/scan.php?page=articleitem=asrock_core100htnum=1 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.
is there really no recommendation for a board not using Nvidia graphics components? It would really be great to not depend on proprietary drivers. Hardware decoding through VA-API is working on some Intel chipsets and CPUs, but I haven't seen any usable GPU deinterlacing implementations besides those in Nvidia's VDPAU. I also would like to remind the framerate issues. Naturally you decide what is enough precision and quality for you. Computer hardware usually cannot provide 50.000Hz, 59.940Hz or 23.976Hz outputs to your TV/Monitor. This will cause some judder on display output as MPEG/AVC input-stream is not synchronized to output framerate. do you mean that all nvidia vdpau cards with existing drivers from Nvidia can't provide exact 50.000Hz, 59.940Hz or 23.976Hz ?? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.
Why not get one of the Zotac IONITX boards and stick it in the M350 case like I did? would you like please show qvdpautest results for zotzc ionitx Fanless, low power, and OS can be installed on SSD, usb flash stick, Microdrive, SD(HC), CF, you name it. They all have usb adapters so that way your system will remain totally silent. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.
I recommend you to use PCI-E GT220 Geforce card with motheboard which you will choice Asus Bravo 220 silent seems to be a passive model. Do you know if these non-motherboard integrated cards support 7.1ch PCM audio over HDMI? seems, doesn't support I got as PM one tip that pointed to this page http://en.wikipedia.org/wiki/Nvidia_PureVideo#Table_of_PureVideo_.28HD.29_GPUs I wonder if some smaller number cheaper model with similar VP4/C skills would do? E.g. Asus EN210 Silent? It could also produce less heat? The text in Wikipedia is not perfectly in line with the table so I wonder if GT2xx is needed for best VDPAU support. It seems that the IONs are VP3/B so your prosal is certainly better (if there is HDMI audio support). this series has very good performance for 1080i temporal_spatial deinterlacing and h264 decoding have a look on qvdpautest http://linuxdvb.org.ru/wbb/index.php?page=ThreadpostID=16142#post16142 Fortunately there's google translate - so there's some worry about passive cooled GT220s? At least the picture of Gigabyte GT220 shows a pretty large heatsink and fan ;^) yes, I will clarify this worries :) Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.
Приветствую, Seppo I recommend you to use PCI-E GT220 Geforce card with motheboard which you will choice this series has very good performance for 1080i temporal_spatial deinterlacing and h264 decoding have a look on qvdpautest http://linuxdvb.org.ru/wbb/index.php?page=ThreadpostID=16142#post16142 My old HTPC motherboard died and I'm now looking for a new one to become a vdr-sxfe thin client. The old Silverstone case is for normal ATX board but I no more need PCI slots so a smaller one, even a Mini-ITX would do. Since the PC runs 24/7 I'm interested in low-power motherboards with Atom CPU. There should be VDPAU support for MPEG-2 SDTV decoding + high-quality de-interlacing. I'm watching also sometimes H.264 HDTV channels from satellite. There should be 1080p50 video + up 7.1ch multi-channel PCM audio over HDMI. I'd like to get rid of SPDIF connection to AV-receiver. My HTPC box has a home-brew LIRC receiver that connected to motherboard (Asus style) COM port heading. If COM ports are history I could change to Bluetooth remote control with a PS3 Blu-Ray remote. Therefore integrated BT support would be nice (otherwise some USB-BT dongle). WLAN is not mandatory since I stream from vdr server over gigabit ethernet. Are there still issues with some ethernet chipsets and Linux? I found some options such as Asus AT3IONT-I DELUXE, Asus AT3IONT-I, Asus AT5IONT-I. I would be happy to hear experiences about these motherboards with Linux and Xine. Are there problems with some motherboard features? Other recommendations are welcome too! ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] vdr + Mystique SaTiX-S2 Dual / V2 CI card
Hi has someone the experience with vdr and Mystique SaTiX-S2 Dual / V2 CI ? What about your impression for them ? Does this card work well under Linux ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] rotor
Приветствую, Timothy Is your bud motorized? yes, I have the motor STRONG SRT DM 2100 http://faraday-systems.uaprom.net/p383218-motopodves-disek-pozitsioner.html (not actuator) and the the dish with diameter 1,1 meter You found a diseqc motor that works with big dishes? 1,1 meter is not big size. And I can watch several satellites in C band with it - the sat positions - 40e, 80e, 90e, 95e The secret is in good LNB, specially and manually adopted for C-band and my dish (from Russian engineer Alyno) http://forum2.alyno.ru/phpBB2/viewtopic.php?p=713#713 Because they need bigger motors then can be powered by the card, they use a different setup. A Actuator that runs on 36v and is told to move one way or the other and then pulses are counted and then the motor is told to stop. Small dish rotors have all that logic on board and you just teil them where you want the dish pointing ok, understand than. But in my case no need any big and special motors Goga On 6/24/2010 1:04 PM, Goga777 wrote: Приветствую, Mike the rotor plugin ( or at least version 1.4mh) can control one rotor per card. For c-band you need a vbox to translate the diseqc commands and to provide the 36 volts to drive the actuator. Thats how I do it. costs about $40 why need vbox for C-band ? I can watch C-band with vdr + rotor + diseqc + 3 Lnb (two LNB are for Ku band, third LNB is for C-band) without any tricks ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] rotor
Приветствую, Mike the rotor plugin ( or at least version 1.4mh) can control one rotor per card. For c-band you need a vbox to translate the diseqc commands and to provide the 36 volts to drive the actuator. Thats how I do it. costs about $40 why need vbox for C-band ? I can watch C-band with vdr + rotor + diseqc + 3 Lnb (two LNB are for Ku band, third LNB is for C-band) without any tricks Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Xine - VDpau config help
Glad to hear, that you managed to fix it. I don't think that the broadcaster will care about it :( How the GT220 is working with vdpau? Is the temporal_spatial deinterlacing working without freezes or dropped frames? I'm thinking about buying a similar card, at the moment I'm using a Geforce 8xxx onboard series, and it is not capable of temporal_spatial at full HD resolution. Or maybe I should wait for the TT FF DVB-S2... It is working fine. It seems it reports using temporal-spatial when deinterlacing SD (I have X configured to 1080p) and temporal (even if the config option asks for temporal-spatial) for HD. it's strange are you sure that in your xien config you have temporal-spatial for hd ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Dual DVB-S2 Tuner cards
I like the Tevii PCIe card. It has a single DVB-S2 receiver with decent sensitivity, is low profile, easy to set-up and multiple cards work in one system. Thomas Thanks, I'm in search of a twin/dual tuner dvb-s2 type card. I have a Satix S2 card which is a dual DVBS2 card, this one in the Linux V4L wiki: http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual From here: http://www.dvbshop.net/product_info.php/info/p2318_Mystique-SaTiX-S2-V2-CI-Dual--2xDVB-S2-CI-HDTV-MPEG4-H-264.html There has been some work on the driver recently by Devin from kernellabs, Devin was saying to me that the driver was pretty awful, it's better now but I don't know how much better! Despite this I have found iхйгщеуъt to work better than my HVR-4000 which problems do you have with hvr4000 ??? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [Test] Release candidate streamdev-0.5.0-rc1
Приветствую, Frank will streamdev continue to support the streaming for xbmc ? Hi there, I'm about to prepare streamdev releases 0.4.0 (final release for VDR-1.4) and 0.5.0 (for VDR-1.6/1.7). The 0.5.0 release will contain two larger changes which have not been commited to the main CVS branch yet. Maybe some of you want to review and comment on these. Get the tarball at http://streamdev.vdr-developer.org. @all: Please see chapter Updating in the README file which is part of the streamdev source distribution. The new version won't run out of the box. You will have to rename the config directory first! Those using externremux.sh will also have to modify their script. @package maintainers: Upon request I split up the language resources for streamdev-client and streamdev-server. Instead of one vdr-streamdev.mo you will now get a vdr-streamdev-server.mo and a vdr-streamdev-client.mo. Consistently the plugin configuration directory changed from streamdev to streamdev-server (there are no configuration files for streamdev-client yet). To build only one plugin, use make client or make server respectively. @externremux users: The remux script is now responsible for emitting HTTP headers. Make sure you update your script! In turn the script gets a CGI like environment which gives you access to request headers, context information and details on the channel. A new sample externremux.sh is included which makes heavy use of request parameters. To reflect these changes, the HTTP URL path ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] pvr-testing2 xbmc discussion
also you can discuss with a devellopers on xbmc-pvr irc channel on freenode.net the archive you can find here is http://xbmc.newsforyou.com/xbmc-pvr I have been using pvr-testing and pvr-testing2 for a while now, and try to keep up to date. However, I have two problems/questions which I want to either ask or flag to the developers but am unsure how to do it or even if it's a known issue? I guess the best thing is to report these issues one by one on the XBMC bugtracker: http://xbmc.org/trac/ When you open new tickets, please use the prefix pvr-testing: when you report a bug regarding PVR stuff. Also choose the developer alwinus and the component unified-pvr. Additionally, if you also want more casual feedback on these reports from the German VDR community who is testing vnsiserver right now, please post links to your Trac tickets on http://www.vdr-portal.de/board/board.php?boardid=95. You can post there in English language, that's not a problem. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] wirblescan 0.0.5-pre11e compilation errors
Приветствую, YUP does support wirbelscan 0.0.5 dvb-s2 or not ? Did anybody try to compile latest wirblescan plugin for vdr 1.7.14? I mean version 0.0.5-pre11e. I've got these errors: scanner.c: In member function ‘virtual void cScanner::Action()’: scanner.c:679:25: error: expected type-specifier scanner.c:679:25: error: cannot convert ‘int*’ to ‘cSwReceiver*’ in assignment scanner.c:679:25: error: expected ‘;’ scanner.c:957:28: error: expected type-specifier scanner.c:957:28: error: cannot convert ‘int*’ to ‘cSwReceiver*’ in assignment scanner.c:957:28: error: expected ‘;’ make: *** [scanner.o] Error 1 I didn't find maintener's direct email address, that is why I decided to write to this mailing list. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Ring Buffer Overflow with streamdev
Приветствую, Simon may be you will happy with http://trac.xbmc.org/browser/branches/pvr-testing2/xbmc/pvrclients/vdr-vnsi/vdr-plugin-vnsiserver?rev=29133 Hi Am running the latest streamdev cvs, patched with http://cobradevil.org/downloads/streamdev-xbmc.patch but am getting frozen live video (recordings are fine) in XBMC and the following: ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] LiveBuffer patch for vdr 1.7.14 (timeshift)
any news about Livebuffer patch for ts format and vdr 1.7.14 ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] XBMC with vdr-1.6.0 ??
Updated to [XBMC] 28276 and have exactly the same problem. Only 3-5 seconds of video when switching to LiveTV...but recordings now play OK. ?? Have noticed that the video freezes at the same time as I get the following in /var/log/messages: Mar 29 22:11:31 freddy vdr: [11020] ERROR: 1 ring buffer overflow (188 bytes dropped) Mar 29 22:11:37 freddy vdr: [11020] ERROR: 51 ring buffer overflows (9588 bytes dropped) Mar 29 22:11:43 freddy vdr: [11020] ERROR: 60 ring buffer overflows (11280 bytes dropped) (XBMC is running on the same machine as VDR) Goga777, looking at thread: http://forum.xbmc.org/showthread.php?t=45314page=51 I'm running streamdev: vdr-plugin-streamdev_0.5.0~pre20090706+cvs20100307.2102.orig.tar.gz which should already have patch streamdev-cvs221109-AddFemonV1.diff applied Have you seen this before?? please try cvs version of streamdev plugin + cumulate patch which I mention in my previous mail Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] looking for working reelchannelscan for vdr-1.7.14
Has someone a working patch for reelchannelscan for vdr-1.7.14? for vdr 1714 and reelchannelscan you should install patch for reelchannelscan http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13971#post13971 thanks to vdr users from Russian vdr forum - 1455 yuri alex_kag Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13
thx Goga, this at least helped to find out what is not working. I always used gotox not gotoposition. When I choose goto position, this method is working, but gotox is not. fine i didn't test goto x there one thing that's really wierd. After I changed rotor.conf like you suggested (before I had a 0 for all positions, as I used gotox), I can see that toggling the satellite list is actually working, but there's no name after it. in earlier vdr version it looked like: Position: 2 S28.2E - Astra 2D/A/B no only this is left: Position: 2 is satellite name displayed in your rotor plugin? the same as you described - no any satellite name also manual scan doesn't work Goag kind regards and thank you for you help Newsy --- Goga777 goga...@bk.ru schrieb am Sa, 27.3.2010: Von: Goga777 goga...@bk.ru Betreff: Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13 An: vdr@linuxtv.org Datum: Samstag, 27. März, 2010 20:33 Uhr Приветствую, Newsy anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling without any probs but when I go to rotor menu I cannot select satellite, there always position: 0 and it can't be toggled. do you have /etc/vdr/plugins/rotor.conf with filled positions like this S5.0E = 0 S7.0E = 0 S9.0E = 9 S10.0E = 0 S13.0E = 13 S16.0E = 0 S19.2E = 19 S28.2E = 0 S28.5E = 0 S36.0E = 36 S39.0E = 39 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] XBMC with vdr-1.6.0 ??
please try to use this cumulate patch for streamdev-plugin from cvs http://cobradevil.org/downloads/streamdev-xbmc.patch or try to use the patched version of streamdev plugin ftp://elcom.kaluga.ru/pub/downloads/streamdev-2010-02-14.tar.gz also there's possibility to watch the femon information on xbmc-pvr Well, I've tried the patched version above, and it is better. I now seem to be able to switch between live channels in XBMC, but still only get a few seconds of video/audio then the stream freezes. don't know why you have so strange behaviour which xbmc-pvr version do you have ? Can you send me your VDR config for streamdev from setup.conf? (mine below) streamdev-server.AllowSuspend = 1 streamdev-server.HTTPBindIP = 127.0.0.1 streamdev-server.HTTPServerPort = 3000 streamdev-server.HTTPStreamType = 1 streamdev-server.IGMPBindIP = 0.0.0.0 streamdev-server.IGMPClientPort = 1234 streamdev-server.IGMPStreamType = 0 streamdev-server.MaxClients = 5 streamdev-server.ServerPort = 2004 streamdev-server.StartHTTPServer = 1 streamdev-server.StartIGMPServer = 0 streamdev-server.StartServer = 1 streamdev-server.SuspendMode = 0 streamdev-server.VTPBindIP = 127.0.0.1 please use streamdev-server.SuspendMode = 1 my settings are streamdev-server.AllowSuspend = 1 streamdev-server.HTTPBindIP = 0.0.0.0 streamdev-server.HTTPServerPort = 3000 streamdev-server.HTTPStreamType = 0 streamdev-server.IGMPBindIP = 0.0.0.0 streamdev-server.IGMPClientPort = 1234 streamdev-server.IGMPStreamType = 0 streamdev-server.MaxClients = 1 streamdev-server.ServerPort = 2004 streamdev-server.StartHTTPServer = 0 streamdev-server.StartIGMPServer = 0 streamdev-server.StartServer = 1 streamdev-server.SuspendMode = 1 streamdev-server.VTPBindIP = 0.0.0.0 ALSO - how do I activate femon in XMBC? I'm running the plugin in VDR, but can't bring up this screen: - TV settings - to show snr - choice Pm3 skin - tune on channel - the button - info - when we will see the service info, let's press Left button - we will see the femon info Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] XBMC with vdr-1.6.0 ??
Приветствую, Simon Well, I've tried the patched version above, and it is better. I now seem to be able to switch between live channels in XBMC, but still only get a few seconds of video/audio then the stream freezes. don't know why you have so strange behaviour which xbmc-pvr version do you have ? I checked out revision 28472 on 9th March 2010 I tested with old version of xbmc-pvr please try to test with revision 28276 (it's last stable not broken revision. Currently xbmc developpers don't recommend to use current svn version) svn update -r28276 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] XBMC with vdr-1.6.0 ??
Приветствую, Simon please try to use this cumulate patch for streamdev-plugin from cvs http://cobradevil.org/downloads/streamdev-xbmc.patch or try to use the patched version of streamdev plugin ftp://elcom.kaluga.ru/pub/downloads/streamdev-2010-02-14.tar.gz also there's possibility to watch the femon information on xbmc-pvr have a look on screenshot http://cobradevil.org/downloads/screenshot002.png Goga On 25/03/2010 20:03, Simon Baxter wrote: Apart from youe eac3 mods etc, does streamdev _actually_need_ any patching to work with xbmc pvr-testing2? Or should http://ppa.launchpad.net/hotzenplotz5/test-vdr-lucid/ubuntu/pool/main/v/vdr-plugin-streamdev/vdr-plugin-streamdev_0.5.0~pre20090706+cvs20100307.2102.orig.tar.gz work fine just compiled with no patches etc? Honestly I don't know. And that's why using prepackaged set of patches avoid omitting necessary fixes and most of the time going into trouble in general. BTW: Once configured, xbmc pvr-testing2, works for SD, epg,... but lacks programming feature and fails for me for HDTV. I dunno if my streamdev really works with HDTV or if its the rendering part that is not able to use VDPAU... As vdr record the HDTV streams correctly, I suppose streamdev should only write the TS stream on a socket instead than on the disk. --eric Have tried that streamdev, and I'm still getting the same problems. I only get a picture and audio for a few seconds. Can you send me your settings from VDR setup.conf? Here's mine.. streamdev-server.AllowSuspend = 1 streamdev-server.HTTPBindIP = 127.0.0.1 streamdev-server.HTTPServerPort = 3000 streamdev-server.HTTPStreamType = 1 streamdev-server.IGMPBindIP = 0.0.0.0 streamdev-server.IGMPClientPort = 1234 streamdev-server.IGMPStreamType = 0 streamdev-server.MaxClients = 5 streamdev-server.ServerPort = 2004 streamdev-server.StartHTTPServer = 1 streamdev-server.StartIGMPServer = 0 streamdev-server.StartServer = 1 streamdev-server.SuspendMode = 0 streamdev-server.VTPBindIP = 127.0.0.1 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14
Приветствую, Newsy for vdr 1714 and rotor you need install the extension patch + rotor patch from http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727 for vdr 1714 and reelchannelscan you should install another patch for reelchannelscan http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13971#post13971 thanks to vdr users from Russian vdr forum - 1455 yuri alex_kag Goga anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling without any probs but when I go to rotor menu I cannot select satellite, there always position: 0 and it can't be toggled. regards Newsy --- Goga777 goga...@bk.ru schrieb am So, 7.3.2010: Von: Goga777 goga...@bk.ru Betreff: Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13 An: vdr@linuxtv.org Datum: Sonntag, 7. März, 2010 19:02 Uhr can someone to create the patch for reelchannelscan and rotor plugin for correct compilation with vdr 1.7.13 with this patch I could run ver-rotor 0.1.5 with vdr 1.7.13 thanks to alex_kag http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14
Приветствую, Newsy Hi Goga, I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff ok I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually. what is vdr-1.7.9-rotor.diff ? please use extension patch for vdr 1714 http://copperhead.vdr-developer.org/downloads/extensionpatch/ExtP-NG-vdr-1.7.14-V1.diff uncomment the line for rotor plugin in makefile.config after patching and recompile vdr Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14
Приветствую, Newsy thx Goga for your quick answer but there's no difference after I used extension patch on a clean vdr 1.7.14. how did you use extension patch ? please explain how did you patch rotor, vdr regards ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14
I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff ok I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually. what is vdr-1.7.9-rotor.diff ? please use extension patch for vdr 1714 http://copperhead.vdr-developer.org/downloads/extensionpatch/ExtP-NG-vdr-1.7.14-V1.diff uncomment the line for rotor plugin in makefile.config after patching and recompile vdr There's no reason you should have to apply that enormous patch. Rotor support should be made available as a small separate patch. It's really stupid when you're forced to install a bunch of crap you don't want/need. agree but I don't have separated rotor patch extracted from extension patch Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] timeshift
Hi
with that patch the timeshift works more reliable on slow systems, where 2
seconds are not enough to fill
up the file enough to start replaying
*** menu.c.orig 2010-02-15 13:15:53.0 +0300
--- menu.c 2010-02-15 12:36:58.0 +0300
***
*** 5476,5482
Skins.Message(mtStatus, tr(Pausing live video...));
cReplayControl::SetRecording(NULL, NULL); // make sure the new
cRecordControl will set cReplayControl::LastReplayed()
if (Start(NULL, true)) {
! sleep(2); // allow recorded file to fill up enough to start replaying
cReplayControl *rc = new cReplayControl;
cControl::Launch(rc);
cControl::Attach();
--- 5476,5482
Skins.Message(mtStatus, tr(Pausing live video...));
cReplayControl::SetRecording(NULL, NULL); // make sure the new
cRecordControl will set cReplayControl::LastReplayed()
if (Start(NULL, true)) {
! sleep(5); // allow recorded file to fill up enough to start replaying
cReplayControl *rc = new cReplayControl;
cControl::Launch(rc);
cControl::Attach();
thanks to Raider05
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14
I made a patch -p1 -i ExtP-NG-vdr-1.7.14-V1.diff ok in vdr root dir. then I copied Make.config.template to Make.config, uncommented rotor =1 line ok for rotor I did a patch -p1 -i rotor-0.1.5-vdr-1.7.13.diff from src/rotor dir. where did you take rotor-0.1.5-vdr-1.7.13.diff ? in /usr/src/vdr/PLUGINS/src/rotor/patches there is not such patch. you should use the patch rotor-0.1.5-vdr-1.7.13.diff from http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727 Goga all hunks succeeded. regards Newsy --- Goga777 goga...@bk.ru schrieb am Sa, 27.3.2010: Von: Goga777 goga...@bk.ru Betreff: Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14 An: vdr@linuxtv.org Datum: Samstag, 27. März, 2010 18:47 Uhr Приветствую, Newsy thx Goga for your quick answer but there's no difference after I used extension patch on a clean vdr 1.7.14. how did you use extension patch ? please explain how did you patch rotor, vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13
Приветствую, Newsy anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling without any probs but when I go to rotor menu I cannot select satellite, there always position: 0 and it can't be toggled. do you have /etc/vdr/plugins/rotor.conf with filled positions like this S5.0E = 0 S7.0E = 0 S9.0E = 9 S10.0E = 0 S13.0E = 13 S16.0E = 0 S19.2E = 19 S28.2E = 0 S28.5E = 0 S36.0E = 36 S39.0E = 39 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ERROR: driver buffer overflow on device 1
I have experienced this problem several times today while on HD h264 channels. Like previously posted: Mar 12 15:02:23 vdr: [20675] buffer usage: 70% (tid=20674) Mar 12 15:02:24 vdr: [20675] buffer usage: 80% (tid=20674) Mar 12 15:02:24 vdr: [20675] buffer usage: 90% (tid=20674) Mar 12 15:02:25 vdr: [20675] buffer usage: 100% (tid=20674) VDR was unresponsive and had to be restarted to fix. Best regards, Derek Sorry, forgot to mention this is with VDR-1.7.13... I confirm - with vdr 1.7.13 still have the same issue I assume, you both use vdr-xine. It would be a good idea to create a backtrace in that situation to rule out vdr-xine as source of this issue. yes, I'm using the vdr-xine 093 please advice how should I use backtrace When VDR is unresponsive, type something like that: gdb /path/to/vdr `pidof vdr` At the gdb prompt, issue the following command: thread apply all bt and provide the output. but with my buffer overflow problem the vdr is working without any deadlock. I can such messages only in syslog. That's why I can't do backtrace Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ERROR: driver buffer overflow on device 1
I have experienced this problem several times today while on HD h264 channels. Like previously posted: Mar 12 15:02:23 vdr: [20675] buffer usage: 70% (tid=20674) Mar 12 15:02:24 vdr: [20675] buffer usage: 80% (tid=20674) Mar 12 15:02:24 vdr: [20675] buffer usage: 90% (tid=20674) Mar 12 15:02:25 vdr: [20675] buffer usage: 100% (tid=20674) VDR was unresponsive and had to be restarted to fix. Best regards, Derek Sorry, forgot to mention this is with VDR-1.7.13... I confirm - with vdr 1.7.13 still have the same issue I assume, you both use vdr-xine. It would be a good idea to create a backtrace in that situation to rule out vdr-xine as source of this issue. yes, I'm using the vdr-xine 093 please advice how should I use backtrace thanks Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Can't start Transfer Mode and (device.c, 1940): Bad file descriptor
Hi with vdr 1713 + cvs streamdev I sometimes have the error ERROR: Can't start Transfer Mode! ERROR (device.c,1940): Bad file descriptor it happened while I tried to switch on another channel from other satellite, than previous. Mar 14 23:51:13 localhost vdr: [7607] switching to channel 2 Mar 14 23:51:13 arvdr vdr: [4811] TS buffer on device 1 thread ended (pid=3346, tid=4811) Mar 14 23:51:13 arvdr vdr: [4810] buffer stats: 21432 (0%) used Mar 14 23:51:13 arvdr vdr: [4810] receiver on device 1 thread ended (pid=3346, tid=4810) Mar 14 23:51:13 arvdr vdr: [5009] receiver on device 1 thread started (pid=3346, tid=5009) Mar 14 23:51:13 arvdr vdr: [5009] receiver on device 1 thread started (pid=3346, tid=5009) Mar 14 23:51:13 arvdr vdr: [5010] TS buffer on device 1 thread started (pid=3346, tid=5010) Mar 14 23:51:13 arvdr vdr: [4806] streamdev-livestreaming thread ended (pid=3346, tid=4806) Mar 14 23:51:13 arvdr vdr: [5010] TS buffer on device 1 thread ended (pid=3346, tid=5010) Mar 14 23:51:13 arvdr vdr: [5009] buffer stats: 0 (0%) used Mar 14 23:51:13 arvdr vdr: [5009] receiver on device 1 thread ended (pid=3346, tid=5009) Mar 14 23:51:13 arvdr vdr: [4805] streamdev-writer thread ended (pid=3346, tid=4805) Mar 14 23:51:13 arvdr vdr: [3357] buffer stats: 54520 (1%) used Mar 14 23:51:13 localhost vdr: [8684] ERROR (device.c,1940): Bad file descriptor Mar 14 23:51:13 arvdr vdr: [3357] buffer stats: 0 (0%) used Mar 14 23:51:13 localhost vdr: [8684] TS buffer on device 10 thread ended (pid=7607, tid=8684) Mar 14 23:51:13 localhost vdr: [8685] buffer stats: 54144 (2%) used Mar 14 23:51:13 localhost vdr: [8685] receiver on device 10 thread ended (pid=7607, tid=8685) Mar 14 23:51:15 localhost vdr: [7607] Streamdev: Lost connection to 192.168.9.254:2004: Connection timed out Mar 14 23:51:15 localhost vdr: [7607] ERROR: Can't start Transfer Mode! Mar 14 23:51:16 arvdr vdr: [3357] Streamdev: Accepted new client (VTP) 192.168.9.88:50583 Mar 14 23:51:16 arvdr vdr: [3357] streamdev: too many clients, rejecting 192.168.9.88:50583 Mar 14 23:51:16 arvdr vdr: [3357] client (VTP) 192.168.9.88:37193 has closed connection Mar 14 23:51:16 arvdr vdr: [3357] streamdev: closing streamdev connection to 192.168.9.88:37193 Mar 14 23:51:16 arvdr vdr: [3357] buffer stats: 0 (0%) used Mar 14 23:51:16 arvdr vdr: [4803] streamdev-filterstreaming thread ended (pid=3346, tid=4803) Mar 14 23:51:16 arvdr vdr: [4802] streamdev-writer thread ended (pid=3346, tid=4802) Mar 14 23:51:16 arvdr vdr: [3357] buffer stats: 0 (0%) used Mar 14 23:51:16 arvdr vdr: [3357] streamdev: closing streamdev connection to 192.168.9.88:50583 Mar 14 23:51:16 localhost vdr: [8682] ERROR: Streamdev: Didn't receive greeting from 192.168.9.254:2004 Mar 14 23:51:17 localhost vdr: [8682] cStreamdevFilters::Action(): stream disconnected ? Mar 14 23:51:19 localhost vdr: [8682] Streamdev: Lost connection to 0.0.0.0:0: Connection timed out Mar 14 23:51:19 localhost vdr: [8681] TS buffer on device 1 thread ended (pid=7607, tid=8681) Mar 14 23:51:19 localhost vdr: [8682] buffer stats: 72004 (6%) used Mar 14 23:51:19 localhost vdr: [8682] StreamdevFilters::Action() ended Mar 14 23:51:19 localhost vdr: [8682] streamdev-client: sections assembler thread ended (pid=7607, tid=8682) Mar 14 23:51:20 localhost kernel: [ 8643.236164] [drm] Num pipes: 1 Mar 14 23:51:23 arvdr vdr: [3350] frontend 0/0 timed out while tuning to channel 2, tp 112207 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ERROR: driver buffer overflow on device 1
I have experienced this problem several times today while on HD h264 channels. Like previously posted: Mar 12 15:02:23 vdr: [20675] buffer usage: 70% (tid=20674) Mar 12 15:02:24 vdr: [20675] buffer usage: 80% (tid=20674) Mar 12 15:02:24 vdr: [20675] buffer usage: 90% (tid=20674) Mar 12 15:02:25 vdr: [20675] buffer usage: 100% (tid=20674) VDR was unresponsive and had to be restarted to fix. Best regards, Derek Sorry, forgot to mention this is with VDR-1.7.13... I confirm - with vdr 1.7.13 still have the same issue Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13
can someone to create the patch for reelchannelscan and rotor plugin for
correct compilation with vdr
1.7.13
with this patch I could run ver-rotor 0.1.5 with vdr 1.7.13
thanks to alex_kag
http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727
Goga
diff -u orig/rotor-0.1.5/menu.c rotor-0.1.5/menu.c
--- orig/rotor-0.1.5/menu.c 2009-10-04 14:54:22.0 +0300
+++ rotor-0.1.5/menu.c 2010-03-06 22:42:23.0 +0200
@@ -139,7 +139,8 @@
RotorPos=RotorPositions.GetfromSource(OldChannel-Source());
Position=RotorPos-GetPos();
Frequenz=OldChannel-Frequency();
- if ((*OldChannel).Polarization() == 'v' || (*OldChannel).Polarization() == 'V')
+ cDvbTransponderParameters dtp((*OldChannel).Parameters());
+ if (dtp.Polarization() == 'v' || dtp.Polarization() == 'V')
Pol='V';
else
Pol='H';
ÐбÑие подкаÑалоги: orig/rotor-0.1.5/patches и rotor-0.1.5/patches
ÐбÑие подкаÑалоги: orig/rotor-0.1.5/po и rotor-0.1.5/po
diff -u orig/rotor-0.1.5/rotor.c rotor-0.1.5/rotor.c
--- orig/rotor-0.1.5/rotor.c 2009-10-04 15:10:26.0 +0300
+++ rotor-0.1.5/rotor.c 2010-03-05 23:07:52.0 +0200
@@ -93,7 +93,7 @@
{
if ((source-Code() 0xC000) != 0x8000)
continue;
-if ((diseqc=Diseqcs.Get(source-Code(),12000,'h')) || (diseqc=Diseqcs.Get(source-Code(),12000,'v')) || (diseqc=Diseqcs.Get(source-Code(),12000,'l')) || (diseqc=Diseqcs.Get(source-Code(),12000,'r')))
+if ((diseqc=Diseqcs.Get(0,source-Code(),12000,'h')) || (diseqc=Diseqcs.Get(0,source-Code(),12000,'v')) || (diseqc=Diseqcs.Get(0,source-Code(),12000,'l')) || (diseqc=Diseqcs.Get(0,source-Code(),12000,'r')))
{
char *c=strdup(diseqc-Commands());
while (c = strchr(c, '['))
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13
hi can someone to create the patch for reelchannelscan and rotor plugin for correct compilation with vdr 1.7.13 arvdr:/usr/src/vdr-1.7.13/PLUGINS/src/reelchannelscan# make all g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='reelchannelscan' -DVDRDIR=\../../..\ -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -D__KERNEL_STRICT_NAMES -I../s2-liplianin/linux/include -I../../../include -I../../../s2-liplianin/linux/include scan.c scan.c: In member function ‘void cScan::ScanDVB_S(cTransponder*, cChannel*)’: scan.c:523: error: ‘class cChannel’ has no member named ‘Modulation’ scan.c:523: error: ‘class cChannel’ has no member named ‘CoderateH’ make: *** [scan.o] Ошибка 1 arvdr:/usr/src/vdr-1.7.13/PLUGINS/src/rotor# make all g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='rotor' -I../s2-liplianin/linux/include -I../../..//include -I../s2-liplianin/linux/include rotor.c rotor.c: In member function ‘virtual bool cPluginRotor::Start()’: rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, char)’ ../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* cDiseqcs::Get(int, int, int, char) rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, char)’ ../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* cDiseqcs::Get(int, int, int, char) rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, char)’ ../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* cDiseqcs::Get(int, int, int, char) rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, char)’ ../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* cDiseqcs::Get(int, int, int, char) make: *** [rotor.o] Ошибка 1 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] log of diseqc commands (rotor plugin)
Приветствую, mike did you gety your log of diseqc stuff for rotor. not if not let me know and I'll send you mine yes, please send it thanks a lot Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] log of diseqc commands (rotor plugin)
Hi does it possible to log the diseqc command from rotor plugin ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] log of diseqc commands (rotor plugin)
does it possible to log the diseqc command from rotor plugin ? Why wouldn't it be possible? Just add some isyslog's in the code. would you please send the patch for it ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Channel not available - vdr 1.7.12 + streamdev
Hi I'm using vdr 1712 + patched cvs streamdev + xbmc pvr-testing2. While watching some dvb channels on xbmc I can see in vdr log strange logs as Feb 13 15:40:55 arvdr vdr: [2154] switching to channel 22 Feb 13 15:40:55 arvdr vdr: [2154] info: Channel not available! really I can watch this channel on xbms without any problem more details is here http://pastebin.com/m1378ef32 Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] vdr 1.7.12 - TS continuity error
Hi I have vdr 1712 + vdr-xine 093 during of watching regular mpeg2 channels sometimes the sound is disappeared and in the logs I can see Feb 13 21:31:06 arvdr logger: fixing sound card drift by 1352 pts Feb 13 21:31:07 arvdr logger: 200 frames delivered, 0 frames skipped, 4 frames discarded Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (2) Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (6) Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (8) Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (4) Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (0) Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (2) Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (0) Feb 13 21:38:17 arvdr vdr: [2884] 3 cRepacker messages suppressed Feb 13 21:38:17 arvdr vdr: [2884] cAudioRepacker(0xC0): skipped 572 bytes while syncing on next audio frame Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (6) Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (10) Feb 13 21:38:17 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() SNDRV_PCM_IOCTL_DELAY failed. Feb 13 21:38:17 arvdr logger: fixing sound card drift by 2413 pts Feb 13 21:38:17 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() SNDRV_PCM_IOCTL_DELAY failed. Feb 13 21:38:17 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() SNDRV_PCM_IOCTL_DELAY failed. Feb 13 21:38:18 arvdr logger: fixing sound card drift by 1956 pts Feb 13 21:38:19 arvdr logger: fixing sound card drift by 1466 pts Feb 13 21:38:29 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() SNDRV_PCM_IOCTL_DELAY failed. Feb 13 21:38:29 arvdr logger: fixing sound card drift by 1250 pts Feb 13 21:38:29 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() SNDRV_PCM_IOCTL_DELAY failed. Feb 13 21:38:35 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() SNDRV_PCM_IOCTL_DELAY failed. Feb 13 21:39:16 arvdr last message repeated 2 times Feb 13 21:39:16 arvdr logger: fixing sound card drift by 1293 pts the full log here's http://pastebin.com/m413ba15d ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] xbmc pvr + streamdev
Hi with new patch for cvs streamdev http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/ I couldn't install streamdev-cvs221109-AddFemonV1.diff the rejects here are http://pastebin.com/m10662b78 second question here is my streamdev settings. Do they correct ? what about streamdev-server.AllowSuspend = 0 ? streamdev-server.AllowSuspend = 0 streamdev-server.HTTPBindIP = 0.0.0.0 streamdev-server.HTTPServerPort = 3000 streamdev-server.HTTPStreamType = 0 streamdev-server.IGMPBindIP = 0.0.0.0 streamdev-server.IGMPClientPort = 1234 streamdev-server.IGMPStreamType = 0 streamdev-server.MaxClients = 1 streamdev-server.ServerPort = 2004 streamdev-server.StartHTTPServer = 0 streamdev-server.StartIGMPServer = 0 streamdev-server.StartServer = 1 streamdev-server.SuspendMode = 1 streamdev-server.VTPBindIP = 0.0.0.0 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr 1.7.12 - issue with some mpeg2 channels (cVideoRepacker: switching to MPEG1/2 mode)
thank you very much for your patch. Now everything is ok. I can only reproduce this issue on channels with separate PCR pid. I'll have to investigate further to find a solution. As of version 1.7.12 VDR records the PCR pid if it is different than the video PID. For lack of better knowledge I made cDevice::PlayTs() send the PCR packets to PlayTsVideo(). The FF cards don't have a problem with that, but maybe xine or the cVideoRepacker does. Maybe VDR shouldn't even replay the PCR data - please advise. As it is possible to access cPatPmtParser since a few releases, I've changed vdr-xine to pull VPID from there instead of picking it from packets passed to PlayTsVideo. -- Удачи, Игорь ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] vdr 1.7.12 - issue with some mpeg2 channels (cVideoRepacker: switching to MPEG1/2 mode)
Hi my configuration is vdr 1712 + vdr-xine 093 + xine-lib-1.2 HG + Geforce 8400 card with vdpau with some dvb-s mpeg2 channels I and others vdr users have jerky video the sample you can download from http://vdr-settings.com/goga/sample_video.tar.bz2 In vdr/xine/vdr-xine logs I can see following Feb 8 21:16:31 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:31 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:33 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:33 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:33 arvdr logger: video jump Feb 8 21:16:35 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:35 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:38 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:38 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:43 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:43 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:46 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:46 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:48 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:48 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:51 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:51 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:53 arvdr vdr: [2547] Text2Skin: menu display update thread started (pid=2145, tid=2547) Feb 8 21:16:55 arvdr logger: video_out: throwing away image with pts 11991425 because it's too old (diff : 5853). Feb 8 21:16:57 arvdr logger: video_out: throwing away image with pts 12139618 because it's too old (diff : 5204). Feb 8 21:16:57 arvdr logger: 200 frames delivered, 0 frames skipped, 2 frames discarded Feb 8 21:16:57 arvdr logger: video_out: throwing away image with pts 12157643 because it's too old (diff : 5231). Feb 8 21:16:57 arvdr vdr: [2547] Text2Skin: menu display update thread ended (pid=2145, tid=2547) Feb 8 21:16:57 arvdr logger: video_out: throwing away image with pts 12190072 because it's too old (diff : 5215). Feb 8 21:16:58 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:58 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:59 arvdr vdr: [2548] Text2Skin: channelInfo display update thread started (pid=2145, tid=2548) Feb 8 21:16:59 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:59 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode full log here is http://pastebin.com/m4afd26e6 vdr-xine log - MakePrimaryDevice: 1 = SetVideoFormat: 1 SetVolumeDevice: 255 SetAudioChannelDevice: 0 SetVolumeDevice: 255 SetPlayMode: 1 SetDigitalAudioDevice: 0 frame: (0, 0)-(-1, -1), zoom: (1.00, 1.00) vdr-xine: Client connecting ... vdr-xine: Client connected! [AM] DiscontinuityDetected: triggering soft start [aAMMM MM MM MM
Re: [vdr] vdr 1.7.12 - issue with some mpeg2 channels (cVideoRepacker: switching to MPEG1/2 mode)
no any problem with vdr 179 my configuration is vdr 1712 + vdr-xine 093 + xine-lib-1.2 HG + Geforce 8400 card with vdpau with some dvb-s mpeg2 channels I and others vdr users have jerky video the sample you can download from http://vdr-settings.com/goga/sample_video.tar.bz2 In vdr/xine/vdr-xine logs I can see following Feb 8 21:16:31 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:31 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:33 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode Feb 8 21:16:33 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode Feb 8 21:16:33 arvdr logger: video ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] can't compile femon 1.7.5 with vdr 1.7.12
/usr/src/vdr/PLUGINS/src/femon# make all g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -Wall -march=athlon-xp -pipe -fomit-frame-pointer -fPIC -c -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_GNU_SOURCE -DPLUGIN_NAME_I18N='femon' -I../s2-liplianin/linux/include -I../../../include femonosd.c femonosd.c: In member function ‘bool cFemonOsd::DeviceSwitch(int)’: femonosd.c:724: error: no matching function for call to ‘cTransferControl::cTransferControl(cDevice*, tChannelID, int, const int*, const int*, const int*)’ ../../../include/vdr/transfer.h:33: note: candidates are: cTransferControl::cTransferControl(cDevice*, const cChannel*) ../../../include/vdr/transfer.h:28: note: cTransferControl::cTransferControl(const cTransferControl) make: *** [femonosd.o] Ошибка 1 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] streamdev for xbmc testing-pvr2
Is that working well ? I am using the vdr-team + henningpingel repo, but still have freezing problems (xbmc goes to +/- 100% cpu) when changing channels in about 30% of the cases. I have the same freezing problem with svn pvr-testing2 + non patched vdr 1711 + cvs streamdev with patches from http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/ I have sent my bug report to xbmc forum - let's see the answer from developers http://xbmc.org/forum/showthread.php?t=45314page=51 Could you tell me where to find the patches for streamdev. I can find some http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs221109-AddFemonV1.diff?view=log http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs221109-AddCallbackMsg.diff?view=log http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs170110-allowStopRecording.patch?view=log http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs170110-VDR1.7.11ParentalRating.patch?view=log ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] streamdev for xbmc testing-pvr2
does support cvs version of streamdev plugin the xbmc testing-pvr2 branch ? or only http://streamdev.vdr-developer.org/snapshots/vdr- streamdev-0.5.0-pre-20090706.tgz will be good for xbmc pvr2 ? The snapshot has been taken right after adding xbmc support to streamdev-cvs. Of course you can take a recent cvs version, too. I would like to run svn pvr2 branch + cvs streamdev + vdr 1.7.11 does it possible at all ? which patches should I install ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] streamdev for xbmc testing-pvr2
I am using that version of streamdev with pvr-testing2 ok. This is my setup: Streamdev plugin for XBMC http://streamdev.vdr-developer.org/ http://streamdev.vdr-developer.org/snapshots/vdr-streamdev-0.5.0-pre-200 90706.tgz PVR testing version of XBMC http://www.xbmc.org/forum/showthread.php?t=45314highlight=pvr svn checkout http://xbmc.svn.sourceforge.net/svnroot/xbmc/branches/pvr-testing2 Patch VDR 1.7.7 with extensions (for Streamdev extension and parental rating) http://www.zulu-entertainment.de/ http://www.zulu-entertainment.de/page/klick.php?d=VDR+Extensions+Patch cp Make.config.template Make.config Edit make.config enabling: PARENTALRATING = 1 STREAMDEVEXT = 1 Other patches not required for XBMC. The parental rating patch just gives nice colouring on the epg for tv show categories. Development is very active and shows much promise. Disappointing deinterlacing though. There is good support for VDPAU but with only half rate temporal. I believe there is the intention to support full rate deinterlacing... eventually. several days ago the xbmc developers have added in trunk the support of full rate temporal and temporal_spatial. You can test them. Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] streamdev for xbmc testing-pvr2
Hi does support cvs version of streamdev plugin the xbmc testing-pvr2 branch ? or only http://streamdev.vdr-developer.org/snapshots/vdr-streamdev-0.5.0-pre-20090706.tgz will be good for xbmc pvr2 ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Cannot compile vdr-plugin-streamdev from today cvs against vdr 1.7.11
server/connectionVTP.c: In member function ‘bool cLSTEHandler::Next(bool)’: server/connectionVTP.c:303: error: ‘const class cEvent’ has no member named ‘GetContentsString?’ server/connectionVTP.c:304: error: ‘const class cEvent’ has no member named ‘GetContentsString?’ make: *** [server/connectionVTP.o] Error 1 I could compile cvs version of streamdev plugin and vdr 1.7.11 without any problem http://streamdev.vdr-developer.org/ Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers
Hi according of discussion in Official linux kernel mailing list http://www.gossamer-threads.com/lists/linux/kernel/1173758# in 2.6.34 kernel we will have Crystal HD driver Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers
I wish we could get away from xine. how ? does it possible at all ? VDR/VDPAU/XINE/XORG. End up with lots of problems, change channels oo fast, somthing crashes, weak signal, something crashes, FF/RW speed changing sometimes crashes, with all the buffering, get slow channel change, slow responce to pause, RW/FF and lots of lip sync problems. Need to reduce some middle ware. On 1/3/2010 1:08 PM, gimli wrote: Hello, i use it with vdr 1.7.10, xine-lib-1.2, vdr-xine, and the xine decoder plugin i wrote at : http://sourceforge.net/apps/trac/archvdr/browser/branches/libcrystalhd cu Edgar (gimli) Hucek Michael Stepanov schrieb: Does somebody use it to watch HD channels with VDR? As I understand that solution can give the same result as nVidia Ion? On Sat, Jan 2, 2010 at 8:29 PM, Manu Abraham abraham.m...@gmail.com wrote: On Sat, Jan 2, 2010 at 10:06 PM, Timothy D. Lenz tl...@vorgon.com wrote: Problem is, that is just a chip. Any boards out using it? Linux drivers? It is not a single chip. It is a combination of 2 chips. The card will be available soon from Azurewave ___ ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR to IPBOX9000HD?
Приветствую, Katty I read about porting VDR to IPBOX 9000HD (STi710x) locking for more informations about this project have a look please http://www.mail-archive.com/vdr@linuxtv.org/msg11392.html Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers
I just share something I read on the XBMC [1] Web site. The Broadcom Crystal HD Hardware Decoder (BCM970012) seems to be an alternative for HD playback with free drivers [2]. You can get it at as an mini-PCIE card at eBay for 22 $ [3]. I'd recommend the BCM70015, which is the better part. where is it possible to buy it ? It works as a decoder only, making YUV 4:2:2 frames available, which must then be blitted to whatever output framebuffer setup you have, over the pci express bus. The API seems very straightforward, much simpler that VDPAU, thus one could get a HW accelerated H.264 setup without X11. what about of corrected interlace output ? Most of them videocards can't do it correctly Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers
I just share something I read on the XBMC [1] Web site. The Broadcom Crystal HD Hardware Decoder (BCM970012) seems to be an alternative for HD playback with free drivers [2]. You can get it at as an mini-PCIE card at eBay for 22 $ [3]. If this is all true in my opinion these are fantastic news. This is great news indeed. In the comments someone mentions this motherboard: http://www.intel.com/products/desktop/motherboards/D510MO/D510MO-overview.htm It can be passively cooled, has a pci and a mini pci-e slot, but it lacks hdmi. have a look at Intel® Desktop Board D945GSEJT http://www.intel.com/products/desktop/motherboards/D945GSEJT/D945GSEJT-overview.htm ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers
what about of corrected interlace output ? Most of them videocards can't
do it correctly
I can't answer that unfortunately.
let's hope that Crystal HD can do deinterlacing and scaling
in crystalhd/include/7411d.h there's lines
/* scaling on/off */
/* - eCMD_C011_DEC_CHAN_OUTPUT_FORMAT */
typedef enum
{
eC011_SCALING_OFF = 0x,
eC011_SCALING_ON= 0x0001,
} eC011_SCALING;
/* deinterlacing on/off */
/* - eCMD_C011_DEC_CHAN_OUTPUT_FORMAT */
typedef enum
{
eC011_DEINTERLACING_OFF = 0x,
eC011_DEINTERLACING_ON = 0x0001,
} eC011_DEINTERLACING;
/* deinterlacing on/off */
/* - eCMD_C011_DEC_CHAN_OUTPUT_FORMAT */
typedef enum
{
eC011_DEINTERLACING_OFF = 0x,
eC011_DEINTERLACING_ON = 0x0001,
} eC011_DEINTERLACING;
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers
Приветствую, Timothy Problem is, that is just a chip. Any boards out using it? Linux drivers? no. it's pci-e mini board with chip and Linux open source driver http://www.broadcom.com/docs/support/crystalhd/crystalhd_linux_20091229.zip Torgeir Veimo wrote: 2010/1/2 Paul Menzel paulepan...@users.sourceforge.net: I just share something I read on the XBMC [1] Web site. The Broadcom Crystal HD Hardware Decoder (BCM970012) seems to be an alternative for HD playback with free drivers [2]. You can get it at as an mini-PCIE card at eBay for 22 $ [3]. I'd recommend the BCM70015, which is the better part. It works as a decoder only, making YUV 4:2:2 frames available, which must then be blitted to whatever output framebuffer setup you have, over the pci express bus. The API seems very straightforward, much simpler that VDPAU, thus one could get a HW accelerated H.264 setup without X11. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Recommendation for new hd vdr system.
The asus P5N7A-VM motherboard seems a good candidate, is its integrated 9300 graphics powerful enough for good deinterlacing? Mmmh, I hate to reply to my own message, but it seems it isn't available anywhere, at least here in Spain :-( I'm just at the same task at the moment. Vdpau enabled IGP motherboards except ION systems seem not to be available at all for some reason. Same for passive Nvidia GT220 cards (not yet available (Zotac Zone Edition or ECS)). agree П210 or Gt220 or new ION2 can be good choice Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] rotor plugin puzzling question
I think the rotor plugin is a bit of a mess now and the latest version (1.5) is a step backwards with no transponder scan facility. A clever friend of mine has doctored the previous version to work with vdr-1.7.9, to still scan transponders and better still to scan C-band transponders. Rotor switches diseqc off it appears and VDR defaults to Ku settings so all c-band appears to be out of rangeanyone else have this problem? may the best solution - to use vdr-reelchannelscan ? nor rotor ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] rotor plugin puzzling question
I couldn't apply a patch
/usr/src/vdr/PLUGINS/src/rotor-0.1.5# cat patch1 | patch -p0 --dry-run
patching file rotor.c
patch: malformed patch at line 6:
(diseqc=Diseqcs.Get(source-Code(),12000,'v')) ||
any clue ?
Is it just me or the newly released rotor plugin for vdr 1.7.9 needs the
following patch to the plugin itself in order to run (although it compiles
fine without it)
If the author reads these lines I would love to know why...
--- rotor.c.old 2006-06-14 23:44:27.0 +0200
+++ rotor.c 2006-06-14 23:46:43.0 +0200
@@ -96,7 +96,8 @@
continue;
if ((diseqc=Diseqcs.Get(source-Code(),12000,'h')) ||
(diseqc=Diseqcs.Get(source-Code(),12000,'v')) ||
(diseqc=Diseqcs.Get(source-Code(),12000,'l')) ||
(diseqc=Diseqcs.Get(source-Code(),12000,'r')))
{
- char *c=strdup(diseqc-Commands());
+ char *commandstring=strdup(diseqc-Commands());
+ char *c=commandstring;
while (c = strchr(c, '['))
{
char *e = strchr(++c, ']');
@@ -131,7 +132,7 @@
break;
}
}
- free(c);
+ free(commandstring);
}
cRotorPos *p = RotorPositions.GetfromSource(source-Code());
if (p==RotorPositions.First())
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] vdr-rotor-0.1.5
http://home.vrweb.de/~bergwinkl.thomas/downro/vdr-rotor-0.1.5.tgz vdr-rotor for vdr 179 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] strange issue with DVB-S2 and VDPAU
wrong modulation - should be everytime S1 and O35 or O25 The channels.conf was as vdr generated it, but I tried different modifications, so maybe that time I changed the modulation, but it didn't helped. read please man vdr about this parameters Believe me, I read it very often, and I had read about channels.conf parameters not in the vdr manual but on the german wiki. please try to use roll-off factor = 0,35 (as here - O35) I tried. I also installed vdr-reelchannelscan plugin, it generated a new channels.conf, but my image remanined broken, and log was full with TS continuity error. One thing: I was wrong about that single FTA radio channel from Hello HD packet: it's also not working, I can hear only some glitches if I tune to.. what about of LOCK - do you have permanent stable LOCK ? have you any figures concerning of SNR BER ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] strange issue with DVB-S2 and VDPAU
After 4 yeras of SD-VDR I tried to move to HD with my VDR box. Current hardware: Asus M3N78-VM with GF9400 Athlon BE2350 TT3200 DVB-S2 Software: Ubuntu 9.04 x86 S2API drivers from linuxtv.org/hg/v4l-dvb hg xine-vdpau xine-ui cvs plain vdr-1.7.9 are you using vdr-xine plugin 093 or vdr-xineliboutput ? which version ? I'm mainly focused on S9.0E source, because I have a Conax subscription for Hello HD package (http://www.lyngsat.com/packages/hello.html) After the first install and some finetunings, FTA HD channels (M2HD, Luxe HD) worked well, what about another FTA channels from 9E - are they working fine ? but I had broken image on Hello HD channels (on SD and HD as well, all of them are in DVB-S2 Mpeg4), and log was full with TS continuity error. My channels list was generated with w_scan. you can try to scan with patched for s2api reelchannelscan vdr plugin - see my announce in this ML After a while I realized that if I let vdr to update my channel.conf, all the channels are working fine. And then came the disaster. Ubuntu said that 9.10 is available, and I choosed to upgrade. it was your fault After the upgrade I had no sound at all on my system. As I saw, many others had this problem with Ubuntu 9.10. yep After a day and a half I managed to fix the sound (compiling alsa, etc), but the TS continuity error came back on vdr. Since then I tried everything, I reinstalled the dvb drivers, xine-lib, xine-ui, I tried vdr-xine plugin and xineliboutput also, but no luck: i have broken image on Hello HD package. what about of 5 FTA channels ? I also tried to make some records from those channels without any output plugin, and I end up with 0 sized recordings (on other channels recordings are fine), so IMHO this has nothing to do with xine. I'm suspecting two things: 1. DVB drivers. 2. Incorrect channels.conf Reinstalling dvb drivers from liplianin did not help, nor various channels.conf's One more detail: I have a Kathrein UFS-910 linux receiver. I have two systems on that: the original firmware and Enigma2. If I try my Conax card in the Kathy, everything works well under E2, but in the original firmware I had the same broken image issue as with VDR. As I am stuck with this for more than a day, any help or any ideas are welcomed. show please your channels.conf try patched vdr-channelscan Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] strange issue with DVB-S2 and VDPAU
My channels.conf: your channels list is wrong wrong modulation - should be everytime S1 and O35 or O25 read please man vdr about this parameters m1 HD;HD Platform:12034:vC34M5O0S1:S9.0E:27500:320=27:0;321=hun:0:BAA:4:158:6600:0 Filmbox Extra;HD Platform:12034:vC34M5O0S0:S9.0E:27500:656=2:657=hun:0:BAA,B00:25:158:6600:0 HirTV;HD Platform:12034:vC34M5O0S0:S9.0E:27500:672=27:673=hun:676:BAA:26:158:6600:0 please try to use roll-off factor = 0,35 (as here - O35) HD-Test ARD ZDF;IRT:11361:hC23M5O35S1:S19.2E:22000:0:0:0:0:11140:1:1011:0 or O25 as here HD4 TEST;Poverkhnost TV:12111:HC34M5O25S1:S36.0E:27500:1213=27:1313=eng:0:654,500:3213:878:12100:0 Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] xineliboutput.OSD.Blending = 1 or 0
Hi how can I recognize - does support my Geforce 8400 card the osd blending hardware method or not in vdr-xineliboutput ? xineliboutput.OSD.Blending = 1 xineliboutput.OSD.BlendingLowRes = 0 Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] vdr-plugin reelchannelscan-0.6.1 with s2api support
Hi http://www.free-x.de/vdr/patches/hdtv/vdr-plugin-reelchannelscan_0.6.1-1tvt1.tar.gz here's patched channelscan plugin for vdr 1.7.* branch. It supports s2api and can scan dvb-s/s2 transponders. It has been tested with vdr 1.7.9. thank to Yuri from Russian Linux VDR/DVB forum http://www.forum.free-x.de/wbb/index.php?page=ThreadthreadID=290 the actual daily updated transponders list in tpl format (and also in ini, xml formats) you can find here's http://www.vdr-settings.com/download/channels/CLyngsatSP.tar.bz2 Goga777 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] xineliboutbut channel change judder
Приветствую, Torgeir I can confirm such behaviour with vdr-xine 093 and vdr 179 - yes, it's really annoing :( Sorry, don't know how to solve such problem When changing channels with vdr-sxfe (remote client on same computer), I get some judder. Playback starts quite quickly at channel change, but then there's a freeze of both audio and video for about half a second before it starts again. Any idea what the problem can be? Relevant .xine/config_xineliboutput; engine.buffers.video_num_buffers:500 (tried 250, no difference) engine.buffers.video_num_frames:15 (tred 30, no difference) engine.buffers.audio_num_buffers is not set, so should use default 230 (?) vdr-sxfe is run as vdr-sxfe --video vdpau --audio oss --verbose --aspect 16:9 --fullscreen --post tvtime:method=use_vo_driver xvdr://127.0.0.1 The xinelibplugin is configured as -Pxineliboutput --local=none --remote=37890 I don't use local playback as it doesn't support all the configuration options that I use for vdpau. Material is mostly 576i. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdpau experience
xineliboutput is a bit more difficult, because the cvs is changing nearly daily, so there is currently no patch available, but it should work without patches. where is the problem? Just do an cvs -z3 -d:pserver:anonym...@xineliboutput.cvs.sourceforge.net:/cvsroot/xineliboutput co -D '2009/10/13 12:00:00' vdr-xineliboutput and you are fine with current 'xineliboutput-cvs-20091013-vdpau-extensions-v11.diff.gz' Thanks for the cvs command. I was unaware that could even be done! on which variant did you stay ? have you any problems with 1080i content watching and playback ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] channels.conf - changing name of channel
Hi each time when I tune on one transponder with radi-channels I have in log follow messages Oct 11 20:29:50 arvdr vdr: [2949] Sent DISEQC command: t V [E0 31 6B 24] [E0 10 38 F7] W150 V t Oct 11 20:29:51 arvdr logger: osd: can't find out current locale character set Oct 11 20:29:51 arvdr last message repeated 11 times Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 569 from 'Energia,;Connecto' to 'ЭНЕРГИЯ,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 569 from 'ЭНЕРГИЯ,;Connecto' to 'Energia,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 1 from 'AvtoRadio,;Connecto' to 'АВТОРАДИО,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 1 from 'АВТОРАДИО,;Connecto' to 'AvtoRadio,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 570 from 'Radio Alla,;Connecto' to 'Радио АЛЛА,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 570 from 'Радио АЛЛА,;Connecto' to 'Radio Alla,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 'Humor-FM,;Connecto' to 'ЮМОР ФМ,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 'ЮМОР ФМ,;Connecto' to 'Humor-FM,;Connecto' Oct 11 20:29:54 arvdr vdr: [2613] switching to channel 626 in channels.conf I have still :Радио 36 NTV+ Energia;Connecto:12303:HC34M2O0S0:S36.0E:27500:0:4143:0:0:30:112:310:0 Radio Alla;Connecto:12303:HC34M2O0S0:S36.0E:27500:0:4180:0:0:45:112:310:0 Радио Зенит ТЕСТ;HTB+:12265:HC34M2O0S0:S36.0E:27500:352+422=2:422:0:0:31102:112:10:0 Humor-FM;Connecto:12303:HC34M2O0S0:S36.0E:27500:0:4092:0:0:57:112:310:0 Relax FM;HTB+:12399:VC34M2O0S0:S36.0E:27500:0:427=rus:0:0:10327:112:3:0 Эхо Москвы;HTB+:12399:VC34M2O0S0:S36.0E:27500:0:428=rus:0:0:10328:112:3:0 Новый день;RSCC:12303:HC34M2O0S0:S36.0E:27500:0:125:0:0:300:112:310:0 Воскресение;TricolorTV:12303:HC34M2O0S0:S36.0E:27500:0:126:0:0:4:112:310:0 Радио Дети FM;HTB+:12418:HC34M2O0S0:S36.0E:27500:0:421:0:0:31101:112:10:0 why did vdr twice rename the same channel ? for example - Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 'Humor-FM,;Connecto' to 'ЮМОР ФМ,;Connecto' Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 'ЮМОР ФМ,;Connecto' to 'Humor-FM,;Connecto' Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr-xine - 4:3 zoom problem with h264 SD channels
Приветствую, Reinhard thanks with your patch now everything is ok I had a look at the above channel. xine reports a ratio of 13636. But the current zoom code in input_vdr.c doesn't consider this to be 4:3. Please replace the function adjust_zoom() by the following code: ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Segmentation fault with vdr 1.7.9 and femon 1.7.4
Hi
with vdr 179 + femon 174 sometimes I have the vdr crash during of switching
between channels with femon
Sep 20 20:10:05 arvdr logger: vo_vdpau: deinterlace: temporal_spatial
Sep 20 20:10:05 arvdr logger: 200 frames delivered, 0 frames skipped, 59 frames
discarded
Sep 20 20:10:05 arvdr logger: video_out: throwing away image with pts 28277792
because it's too old (diff : 3732).
Sep 20 20:10:05 arvdr logger: input_vdr: flush buffers (vb: 0, ab: 0, vf: 0,
af: 0) done.
Sep 20 20:10:10 arvdr vdr: [3177] changing name of channel 2 from
'EinsFestival,;ARD' to 'Einsfestival,;ARD'
Sep 20 20:10:10 arvdr vdr: [3176] frontend 0 lost lock on channel 1, tp 110743
Sep 20 20:10:10 arvdr logger: input_vdr: execution of rpc command 0 () failed,
exiting ...
Sep 20 20:10:10 arvdr kernel: [ 409.669020] receiver on dev[3523]: segfault at
9ef1000 ip b7bd7d26 sp b2d5a298 error 6
in libc-2.9.so[b7b5f000+158000]
Sep 20 20:10:11 arvdr logger: input_vdr: rpc thread done.
Sep 20 20:10:11 arvdr lircd-0.8.3[2477]: removed client
gdb output
[Thread 0xb026ab90 (LWP 3556) exited]
[New Thread 0xb026ab90 (LWP 3557)]
[Thread 0xb026ab90 (LWP 3557) exited]
[New Thread 0xb026ab90 (LWP 3558)]
[Thread 0xb026ab90 (LWP 3558) exited]
[New Thread 0xb026ab90 (LWP 3559)]
[Thread 0xb026ab90 (LWP 3559) exited]
[New Thread 0xb026ab90 (LWP 3560)]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb2468b90 (LWP 3554)]
0xb7ce7d26 in memcpy () from /lib/i686/cmov/libc.so.6
(gdb) bt
#0 0xb7ce7d26 in memcpy () from /lib/i686/cmov/libc.so.6
#1 0x00e8 in ?? ()
#2 0xb77a1e46 in ?? ()
#3 0x080a6ee8 in cDevice::Action (this=0x8de9fd0) at device.c:1464
#4 0x08118300 in cThread::StartThread (Thread=0x8de9fd0) at thread.c:257
#5 0xb7fcb495 in start_thread () from /lib/i686/cmov/libpthread.so.0
#6 0xb7d50a4e in clone () from /lib/i686/cmov/libc.so.6
(gdb) disass $pc-32 $pc+32
Dump of assembler code from 0xb7ce7d06 to 0xb7ce7d46:
0xb7ce7d06 memcpy+38: push %ss
0xb7ce7d07 memcpy+39: movsb %ds:(%esi),%es:(%edi)
0xb7ce7d08 memcpy+40: dec%ecx
0xb7ce7d09 memcpy+41: test $0x3,%esi
0xb7ce7d0f memcpy+47: je 0xb7ce7d1d memcpy+61
0xb7ce7d11 memcpy+49: movsb %ds:(%esi),%es:(%edi)
0xb7ce7d12 memcpy+50: dec%ecx
0xb7ce7d13 memcpy+51: test $0x3,%esi
0xb7ce7d19 memcpy+57: je 0xb7ce7d1d memcpy+61
0xb7ce7d1b memcpy+59: movsb %ds:(%esi),%es:(%edi)
0xb7ce7d1c memcpy+60: dec%ecx
0xb7ce7d1d memcpy+61: push %eax
0xb7ce7d1e memcpy+62: mov%ecx,%eax
0xb7ce7d20 memcpy+64: shr$0x2,%ecx
0xb7ce7d23 memcpy+67: and$0x3,%eax
0xb7ce7d26 memcpy+70: rep movsl %ds:(%esi),%es:(%edi)
0xb7ce7d28 memcpy+72: mov%eax,%ecx
0xb7ce7d2a memcpy+74: rep movsb %ds:(%esi),%es:(%edi)
0xb7ce7d2c memcpy+76: pop%eax
0xb7ce7d2d memcpy+77: mov%eax,%edi
0xb7ce7d2f memcpy+79: mov%edx,%esi
0xb7ce7d31 memcpy+81: mov0x4(%esp),%eax
0xb7ce7d35 memcpy+85: ret
0xb7ce7d36 memcpy+86: shr%ecx
0xb7ce7d38 memcpy+88: jae0xb7ce7d3b memcpy+91
0xb7ce7d3a memcpy+90: movsb %ds:(%esi),%es:(%edi)
0xb7ce7d3b memcpy+91: shr%ecx
0xb7ce7d3d memcpy+93: jae0xb7ce7d41 memcpy+97
0xb7ce7d3f memcpy+95: movsw %ds:(%esi),%es:(%edi)
0xb7ce7d41 memcpy+97: rep movsl %ds:(%esi),%es:(%edi)
0xb7ce7d43 memcpy+99: jmp0xb7ce7d2d memcpy+77
0xb7ce7d45: nop
End of assembler dump.
(gdb) info all-registers
eax0x0 0
ecx0x3ffb43f3 1073431539
edx0xffd4 -44
ebx0x92df5e4154007012
esp0xb2468298 0xb2468298
ebp0xb24682c8 0xb24682c8
esi0xb266a000 -1301897216
edi0x94273cc155349964
eip0xb7ce7d26 0xb7ce7d26 memcpy+70
eflags 0x210246 [ PF ZF IF RF ID ]
cs 0x73 115
ss 0x7b 123
ds 0x7b 123
es 0x7b 123
fs 0x0 0
gs 0x33 51
st00(raw 0x)
st10(raw 0x)
st20(raw 0x)
st30(raw 0x)
st40.31748889757214362141724(raw
0x3ffda28de7553e0819da)
st51(raw 0x3fff8000)
st6100 (raw 0x4005c800)
st7100 (raw 0x4005c800)
fctrl 0x37f895
fstat 0x4020 16416
ftag 0x 65535
fiseg 0x0 0
fioff 0x0 0
foseg 0x0 0
fooff 0x0 0
fop0x0 0
xmm0 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0},
v16_int8 = {0x0 repeats 16 times},
v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0,
0x0, 0x0}, v2_int64 = {0x0, 0x0},
uint128 = 0x}
xmm1 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0},
v16_int8 = {0x0 repeats 16 times},
v8_int16 = {0x0, 0x0,
Re: [vdr] vdr-sxfe buffer empty
which xineliboutput version are you using ? cvs ? any patches from here ? http://www.vdr-portal.de/board/thread.php?threadid=86804 Goga vdr 179 + xbmc vdr 1.7.8 + xinelibeoutput cvs -minus said patch. Am using the did you try vdr 179 with cvs xineliboutput ? xine-lib 1.2 vdpau branch, which I previously used to run xine with have you any difference between xine-lib 1.2 vdpau branch and xine-vdpau branch ? I'm amazed that vdr-sxfe manages to completely avoid any judder in playback, something which I haven't really seen since I ran with a ff card. did you try with local frontend ? not with vdr-sxfe There's some occasional loss of audio lipsync, and channel change is not smooth; I see both audio and video freeze for a few frames. I guess both of those are work in progress. Would any of the patches from the vdr-portal thread above help on those issues? You can try that patch xine-vdpau-r281-crop-v9.diff.gz http://www.vdr-portal.de/board/attachment.php?attachmentid=22895 there're good reports about it http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=8313#post8313 I have to say that vdpau is looking like a very good solution for hdtv playback, it's just a shame that they didn't implement field parity support for interlaced material. +1 Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr-sxfe buffer empty
Приветствую, Torgeir which xineliboutput version are you using ? cvs ? any patches from here ? http://www.vdr-portal.de/board/thread.php?threadid=86804 Goga vdr 179 + xbmc 2009/9/13 Goga777 goga...@bk.ru: Приветствую, Torgeir I'm trying to find out why vdr-sxfe freezes for a split second once or twice every minute. Am running a xineliboutput is configured as -Pxineliboutput --local=none --remote=37890 I run vdr-sxfe as vdr-sxfe --video vdpau --audio oss xvdr://127.0.0.1 --verbose --aspect 16:9 --fullscreen --post tvtime:method=use_vo_driver --hud --syslog 21 | /tmp/sxfelog.txt Some output log from xine_input.c Sep 13 10:54:18 htpc vdr-sxfe[4771]: [4781] [input_vdr] SCR: Buffer please try to revert this comment http://xineliboutput.cvs.sourceforge.net/viewvc/xineliboutput/vdr-xineliboutput/xine_input_vdr.c?r1=1.278r2=1.279sortby=date (thanks to Rofa for that advice) Thx! vdr-sxfe now runs very smootly with SD channels. Slight judder still with HD channels though. Now the VDR experience is the best I've had for a very long time, vdr-sxfe provides me with judder free live tv and playback, something I never achieved with vdr-xine. Generic media playback through the media browser is a definite plus, although the media browser interface is a bit too cluttered to achieve high WAF. It would be nice to be able to clear the settings from the main media player menu, and optionally turn off items, eg. if I never need to use the play music / play cd options. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr-sxfe buffer empty
Приветствую, Torgeir I'm trying to find out why vdr-sxfe freezes for a split second once or twice every minute. Am running a xineliboutput is configured as -Pxineliboutput --local=none --remote=37890 I run vdr-sxfe as vdr-sxfe --video vdpau --audio oss xvdr://127.0.0.1 --verbose --aspect 16:9 --fullscreen --post tvtime:method=use_vo_driver --hud --syslog 21 | /tmp/sxfelog.txt Some output log from xine_input.c Sep 13 10:54:18 htpc vdr-sxfe[4771]: [4781] [input_vdr] SCR: Buffer please try to revert this comment http://xineliboutput.cvs.sourceforge.net/viewvc/xineliboutput/vdr-xineliboutput/xine_input_vdr.c?r1=1.278r2=1.279sortby=date (thanks to Rofa for that advice) Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] xbmc-pvr (was - HD clients for vdr)
do you know why xbmc support only vdpau-temporal ? what about bob-vdpau ? temporal_spatial-vdpau ? I got xbmc-vdr working the other day - but can't seem to see any active deinterlacing when using VDPAU Temporal. Other methods such as bob and weave work okay, but not VDPAU. Does anyone else see this problem? Pretty useless without any reasonable deint going on.. :-( ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] vdr-femon-1.7.3
Приветствую, Rolf thanks you very much for your wonderful plugin Please, report any regressions by email/IRC. which IRC channel do you mean ? xine-vdpau ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] 1.7.9 patches
Thanks for the ttxtsubs patch for vdr 1.7.9 Anybody has a vdr-1.7.9_extensions.diff patch? Or a setup plugin patch for vdr 1.7.9 have a look here please http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=7872#post7872 Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9
Your headers seem broken. What should happen (i.e. in upstream kernel git) is: let's have a look on my headers (debian sid kernel 2.6.30 s2-liplianin dvb) Did you look in /usr/include/linux/dvb/... or in /usr/src/linux/... ? /usr/src/s2-liplianin/linux For compiling userspace stuff (which vdr for sure is), the versions in /usr/include are used. not so necessary it's possible to change this behaviour -- edit -- Make.config -- DVBDIR = /usr/src/s2-liplianin/linux Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9
Maybe one of these includes in these files is missing? as you can see - no, everything is ok Confirm that you looked at the correct files: You should first look under ../s2-liplianin/linux/include/ in dir /usr/src/s2-liplianin/linux/include/linux there's not any mentioned you files you can have a look yourselves http://mercurial.intuxication.org/hg/s2-liplianin/file/ecdc9c389f8a/linux/include/ , and if the file in question doesn't exist there, you should look under /usr/include/ (note, not in /usr/src). I did so exactly in my previous mail PS vdr 178 compiled fine with existing headers Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9
Run this: g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -E -DREMOTE_KBD -DLIRC_DEVICE=\/dev/lircd\ -DRCU_DEVICE=\/dev/ttyS0\ -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DVIDEODIR=\/video\ -DCONFDIR=\/etc/vdr\ -DPLUGINDIR=\./PLUGINS/lib\ -DLOCDIR=\./locale\ -I/usr/include/freetype2 -I../s2-liplianin/linux/include -o vdr.processed.c vdr.c vdr.processed.c should contain the preprocessed C++ source code. Please attach it (provided it is not too large) or upload somewhere. vdr.processed.c.bz2 http://slil.ru/27922128 ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9
I did so exactly in my previous mail PS vdr 178 compiled fine with existing headers Have you tried the patch I posted? no, because I have already solved this problem (as I wrote in my previous mail) I could compile vdr 179 after of adding in dvbdevice.h string like typedef unsigned char __u8; http://vdrportal.de/board/thread.php?postid=806612sid=21750376f0aea416e10c099a4a488686#post806612 Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9
Which distribution and version are you using? debian sid kernel 2.6.30 And package name where /usr/include/linux/types.h and related files would also help: rpm -qf /usr/include/linux/types.h (on rpm systems) dpkg -S /usr/include/linux/types.h (on deb systems, I think) arvdr:/usr/src/vdr-1.7.9# dpkg -S /usr/include/linux/types.h linux-libc-dev: /usr/include/linux/types.h Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9
I have to use the following patch: --- vdr-1.7.5/vdr.c.orig2009-04-12 11:05:51.0 -0700 +++ vdr-1.7.5/vdr.c 2009-04-12 11:07:08.0 -0700 @@ -32,6 +32,7 @@ #include pwd.h #include signal.h #include stdlib.h +#include linux/types.h #include sys/capability.h #include sys/prctl.h #include termios.h I checked and can confirm - vdr 179 compiled fine with this patch Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Turn off/relocate ts error logging
Aug 23 10:53:31 LLLx64-32 vdr: [2635] TS continuity error (2) Aug 23 10:53:31 LLLx64-32 vdr: [2635] TS continuity error (6) Aug 23 10:53:31 LLLx64-32 vdr: [2635] TS continuity error (9) Aug 23 10:53:31 LLLx64-32 vdr: [2635] TS continuity error (11) Aug 23 10:53:31 LLLx64-32 vdr: [2635] TS continuity error (8) This doesn't come from VDR (any more), because it no longer uses cTS2PES. do you mean - since vdr 179 this warning should disappear ? with vdr 178 I have these warnings too Aug 23 20:21:14 arvdr logger: waiting for in_discontinuity update #214 Aug 23 20:21:14 arvdr vdr: [3621] TS continuity error (2) Aug 23 20:21:14 arvdr vdr: [3621] TS continuity error (1) Aug 23 20:21:14 arvdr vdr: [3621] cAudioRepacker(0xC0): skipped 392 bytes to sync on next audio frame Aug 23 20:21:14 arvdr vdr: [3621] PES packet shortened to 3286 bytes (expected: 3470 bytes) Aug 23 20:21:14 arvdr vdr: [3621] TS continuity error (4) Aug 23 20:21:14 arvdr vdr: [3621] PES packet shortened to 3286 bytes (expected: 3470 bytes) Aug 23 20:21:17 arvdr logger: video_out: throwing away image with pts 55595230 because it's too old (diff : 58615). Aug 23 20:21:17 arvdr vdr: [3168] cTS2PES got 0 TS errors, 2 TS continuity errors Aug 23 20:21:17 arvdr vdr: [3168] cTS2PES got 0 TS errors, 3 TS continuity errors Aug 23 20:21:17 arvdr logger: input_vdr: flush buffers (vb: 0, ab: 0, vf: 0, af: 0) done. Aug 23 20:21:17 arvdr vdr: [3622] TS buffer on device 1 thread ended (pid=3168, tid=3622) Aug 23 20:47:05 arvdr vdr: [3189] Sent DISEQC command: t V W15 [E0 10 38 F3] W15 A W15 T Aug 23 20:47:05 arvdr vdr: [4119] TS continuity error (7) Aug 23 20:47:27 arvdr vdr: [3168] switching to channel 40 Aug 23 20:47:27 arvdr vdr: [3168] cTS2PES got 0 TS errors, 1 TS continuity errors ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
