[WISPA] MDU wiring
Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit... what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.commailto:g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit... what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com mailto:g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
And bottle necks. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Oct 29, 2013 10:13 AM, Sam Tetherow tethe...@shwisp.net wrote: Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: ** ** New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit… what would be the cheapest way to wire this for Cat5 Ethernet? ** ** Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
Then I have to add a switch and ups on each floor... I was thinking of home running all to the top floor... no? Gino A. Villarini g...@aeronetpr.commailto:g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Sam Tetherow Sent: Tuesday, October 29, 2013 10:13 AM To: WISPA General List Subject: Re: [WISPA] MDU wiring Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit... what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.commailto:g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
Guess it depends on what you consider cheapest. Homerun to the roof will add more labor, wiring complexity (and size) and you will probably run into distance issues on a 15 story MDU. On 10/29/2013 09:20 AM, Gino Villarini wrote: Then I have to add a switch and ups on each floor... I was thinking of home running all to the top floor... no? Gino A. Villarini g...@aeronetpr.com mailto:g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 *From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Sam Tetherow *Sent:* Tuesday, October 29, 2013 10:13 AM *To:* WISPA General List *Subject:* Re: [WISPA] MDU wiring Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit... what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com mailto:g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org mailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
That's what I would do. Probably fiber between floor/top. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Oct 29, 2013 10:21 AM, Gino Villarini g...@aeronetpr.com wrote: Then I have to add a switch and ups on each floor… I was thinking of home running all to the top floor… no? ** ** Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Sam Tetherow *Sent:* Tuesday, October 29, 2013 10:13 AM *To:* WISPA General List *Subject:* Re: [WISPA] MDU wiring ** ** Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit… what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
[WISPA] WISP Industry Growth Rate
Hi All, I'd appreciate your help. We are trying to find a good number for the WISP industry annual growth rate. I've seen a number of 4%, but that was just for the really big carriers. Does anyone know of a source? Regards, Jeff Jeff Broadwick Bitlomat Sales Director 847-238-2481 Office 574-220-7826 Cell www.bitlomat.com https://www.facebook.com/Bitlomat http://www.linkedin.com/company/bitlomat ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
On 10/29/2013 10:20 AM, Gino Villarini wrote: Then I have to add a switch and ups on each floor... I was thinking of home running all to the top floor... no? How big is each floor? This may be a case where exact mapping of the route matters. Cat5e at 100 Mbps is rated for 100 meters maximum between actives. In practice it often works farther but it's not good practice to risk it in this sort of installation. It comes in 4-pair (drop), 25-pair, and 100-pair cables. The total length includes, then, any vertical risers (25 or 100 pairs), any horizontal pulls (probably 4-pair), and any connecting cords. A 15-story building means the vertical distance alone, to the farthest closet, uses up about half the total budget. Then add in the stuff on each floor. If it's a small, tall building, like some cramped hotels I've stayed in in New York ;-) , then it still might work if it's all home run. Otherwise, you probably need more than one switch. You might put the hub switch in the main room and run 25-pair or 100-pair to panels on nearby floors, depending on the unit count, and then light tributary switches on more distant floors, each serving a few nearby floors. I would not however daisy-chain anything. Two levels of switch, hub and floor, tops. And while managed switches cost more, they're probably worth it if you're going to have to maintain this, to reduce truck rolls. *From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Sam Tetherow *Sent:* Tuesday, October 29, 2013 10:13 AM *To:* WISPA General List *Subject:* Re: [WISPA] MDU wiring Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit... what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com mailto:g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org mailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- Fred R. Goldstein k1io fred at interisle.net Interisle Consulting Group +1 617 795 2701 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
Can you put switches every few floors, like every 3 or 5? Would cut down the wiring distance and reduce to only needing 5 or 3 UPSes, racks, etc. On Tue, Oct 29, 2013 at 10:20 AM, Gino Villarini g...@aeronetpr.com wrote: Then I have to add a switch and ups on each floor… I was thinking of home running all to the top floor… no? ** ** Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Sam Tetherow *Sent:* Tuesday, October 29, 2013 10:13 AM *To:* WISPA General List *Subject:* Re: [WISPA] MDU wiring ** ** Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit… what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
I don't know if you'd be within the distance limitations. TP-Link switches are pretty cheap. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Gino Villarini g...@aeronetpr.com To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 9:20:44 AM Subject: Re: [WISPA] MDU wiring Then I have to add a switch and ups on each floor… I was thinking of home running all to the top floor… no? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Sam Tetherow Sent: Tuesday, October 29, 2013 10:13 AM To: WISPA General List Subject: Re: [WISPA] MDU wiring Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit… what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
Depending on how many units are on each floor... You might be able to save some $ if you install POE powered Switches on each of the floors, thus concentrating / reducing the number of UPS's required. You could do a Passive POE powered from a couple of of the Telco Closets (using Mikrotik for example) Or you can do 802.3af active powered (SLM2008 ...) Regards Faisal Imtiaz Snappy Internet Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net - Original Message - From: Gino Villarini g...@aeronetpr.com To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 10:20:44 AM Subject: Re: [WISPA] MDU wiring Then I have to add a switch and ups on each floor… I was thinking of home running all to the top floor… no? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Sam Tetherow Sent: Tuesday, October 29, 2013 10:13 AM To: WISPA General List Subject: Re: [WISPA] MDU wiring Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit… what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] WISP Industry Growth Rate
Revenue or subscribers? For us we have seen a drop in our % growth of subs since the economic downturn. I think we are around 20% this year (was 40-50%) But thanks to Netflix we have seen a huge amount of growth in ARPU. I think our revenue is up 35-40% this year. Kinda crazy but I don't mind making more money with less work haha. Sean On Tuesday, October 29, 2013, Jeff Broadwick wrote: Hi All, I'd appreciate your help. We are trying to find a good number for the WISP industry annual growth rate. I've seen a number of 4%, but that was just for the really big carriers. Does anyone know of a source? Regards, Jeff Jeff Broadwick Bitlomat Sales Director 847-238-2481 Office 574-220-7826 Cell www.bitlomat.com https://www.facebook.com/Bitlomat http://www.linkedin.com/company/bitlomat ___ Wireless mailing list Wireless@wispa.org javascript:; http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] WISP Industry Growth Rate
Too broad of a question really. Here in Indiana, there isn't much low hanging fruit left to chase. Beyond telcos, cellcos, and cable, there are multiple wisps to compete against. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jeff Broadwick Sent: Tuesday, October 29, 2013 10:43 AM To: 'WISPA General List' Subject: [WISPA] WISP Industry Growth Rate Hi All, I'd appreciate your help. We are trying to find a good number for the WISP industry annual growth rate. I've seen a number of 4%, but that was just for the really big carriers. Does anyone know of a source? Regards, Jeff Jeff Broadwick Bitlomat Sales Director 847-238-2481 Office 574-220-7826 Cell www.bitlomat.com https://www.facebook.com/Bitlomat http://www.linkedin.com/company/bitlomat ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] MDU wiring
The driving factor is # of units per floor, and distance to furthest port. From there you will be able to determine where your switches need to be. In some cases we have had to split the building and put switches on every other floor at both ends of the building because the horizontal run was too long to get from the unit to the closet. Typically the apartment will be wired internally to a terminal can in a closet where your drop would be so it's only one drop per unit. On Tue, Oct 29, 2013 at 8:13 AM, Mike Hammett wispawirel...@ics-il.netwrote: I don't know if you'd be within the distance limitations. TP-Link switches are pretty cheap. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *Gino Villarini g...@aeronetpr.com *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 9:20:44 AM *Subject: *Re: [WISPA] MDU wiring Then I have to add a switch and ups on each floor… I was thinking of home running all to the top floor… no? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Sam Tetherow *Sent:* Tuesday, October 29, 2013 10:13 AM *To:* WISPA General List *Subject:* Re: [WISPA] MDU wiring Switch on each floor, cat5e to each unit. If you have the ability, wire each floor back to the telco room on the roof, otherwise you could 'daisy-chain' each floor to the one above it back to the roof. Second option has a lot more points of failure though. On 10/29/2013 09:05 AM, Gino Villarini wrote: Given the following scenario: New MDU , 15 floors, telco room on top, telco closet on each floor with conduit to each Unit… what would be the cheapest way to wire this for Cat5 Ethernet? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] WISP Industry Growth Rate
Both measures actually. I think you need both for an accurate picture. Regards, Jeff Broadwick Bitlomat Sales Director 847-238-2481 Office 574-220-7826 Cell www.bitlomat.com https://www.facebook.com/Bitlomat http://www.linkedin.com/company/bitlomat From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Sean Heskett Sent: Tuesday, October 29, 2013 11:41 AM To: WISPA General List Subject: Re: [WISPA] WISP Industry Growth Rate Revenue or subscribers? For us we have seen a drop in our % growth of subs since the economic downturn. I think we are around 20% this year (was 40-50%) But thanks to Netflix we have seen a huge amount of growth in ARPU. I think our revenue is up 35-40% this year. Kinda crazy but I don't mind making more money with less work haha. Sean On Tuesday, October 29, 2013, Jeff Broadwick wrote: Hi All, I'd appreciate your help. We are trying to find a good number for the WISP industry annual growth rate. I've seen a number of 4%, but that was just for the really big carriers. Does anyone know of a source? Regards, Jeff Jeff Broadwick Bitlomat Sales Director 847-238-2481 Office 574-220-7826 Cell www.bitlomat.com https://www.facebook.com/Bitlomat http://www.linkedin.com/company/bitlomat ___ Wireless mailing list Wireless@wispa.org javascript:; http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
[WISPA] Setting up Nanostations
I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: ** I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
On purpose?-Mike HammettIntelligent Computing Solutionshttp://www.ics-il.comFrom: "~NGL~" n...@ngl.netTo: "WISPA General List" wireless@wispa.orgSent: Tuesday, October 29, 2013 11:56:51 AMSubject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh LuthmanOffice: 937-552-2340Direct: 937-552-23431100 Wayne StSuite 1337Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher.And if it's in English Thank A Soldier!___Wireless mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless ___Wireless mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless___Wireless mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
That's likely to be your problem. I've never had a problem with the AirMax GUI on Chrome or Firefox. There was (is?) a dumb bug in legacy stuff with Chrome. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:55 PM, Mike Hammett wispawirel...@ics-il.netwrote: On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *~NGL~ n...@ngl.net *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 11:56:51 AM *Subject: *Re: [WISPA] Setting up Nanostations IE 8 *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 9:54 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: ** I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: ** I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL *From:* Mike Hammett wispawirel...@ics-il.net *Sent:* Tuesday, October 29, 2013 9:55 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *~NGL~ n...@ngl.net *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 11:56:51 AM *Subject: *Re: [WISPA] Setting up Nanostations IE 8 *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 9:54 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: ** I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
Same results with Chrome. What now? NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: ** Same results with Chrome. What now? NGL *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 10:08 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: ** I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL *From:* Mike Hammett wispawirel...@ics-il.net *Sent:* Tuesday, October 29, 2013 9:55 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *~NGL~ n...@ngl.net *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 11:56:51 AM *Subject: *Re: [WISPA] Setting up Nanostations IE 8 *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 9:54 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: ** I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.comwrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: ** Same results with Chrome. What now? NGL *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 10:08 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: ** I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL *From:* Mike Hammett wispawirel...@ics-il.net *Sent:* Tuesday, October 29, 2013 9:55 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *~NGL~ n...@ngl.net *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 11:56:51 AM *Subject: *Re: [WISPA] Setting up Nanostations IE 8 *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 9:54 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: ** I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
Clear cache ? On Tuesday, October 29, 2013, Josh Luthman wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: ** Same results with Chrome. What now? NGL *From:* Josh Luthman *Sent:* Tuesday, October 29, 2013 10:08 AM *To:* WISPA General List *Subject:* Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: ** I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL *From:* Mike Hammett *Sent:* Tuesday, October 29, 2013 9:55 AM *To:* WISPA General List *Subject:* Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *~NGL~ n...@ngl.net *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 11:56:51 AM *Subject: *Re: [WISPA] Setting up Nanostations IE 8 *From:* Josh Luthman *Sent:* Tuesday, October 29, 2013 9:54 AM *To:* WISPA General List *Subject:* Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 11:19 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless flag.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ~NGL~ Sent: Tuesday, October 29, 2013 2:35 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL From: Josh Luthmanmailto:j...@imaginenetworksllc.com Sent: Tuesday, October 29, 2013 11:19 AM To: WISPA General Listmailto:wireless@wispa.org Subject: Re: [WISPA] Setting up Nanostations It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.commailto:j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.netmailto:n...@ngl.net wrote: Same results with Chrome. What now? NGL From: Josh Luthmanmailto:j...@imaginenetworksllc.com Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General Listmailto:wireless@wispa.org Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.netmailto:n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammettmailto:wispawirel...@ics-il.net Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General Listmailto:wireless@wispa.org Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: ~NGL~ n...@ngl.netmailto:n...@ngl.net To: WISPA General List wireless@wispa.orgmailto:wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthmanmailto:j...@imaginenetworksllc.com Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General Listmailto:wireless@wispa.org Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.netmailto:n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL [cid:image001.gif@01CED4B4.7972EDE0] If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless inline: image001.gif___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
I'd try that, too. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:37 PM, Steve Barnes st...@pcswin.com wrote: Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. ** ** *Steve Barnes* General Manager PCSWIN.com Howard LLC. ** ** *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *~NGL~ *Sent:* Tuesday, October 29, 2013 2:35 PM *To:* WISPA General List *Subject:* Re: [WISPA] Setting up Nanostations ** ** No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 11:19 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 10:08 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL *From:* Mike Hammett wispawirel...@ics-il.net *Sent:* Tuesday, October 29, 2013 9:55 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ** ** -- *From: *~NGL~ n...@ngl.net *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 11:56:51 AM *Subject: *Re: [WISPA] Setting up Nanostations IE 8 *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 9:54 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** What browser are you using? ** ** Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** ** ** -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
I have downloaded the and installed the firmware and reset the config. No Help NGL From: Steve Barnes Sent: Tuesday, October 29, 2013 11:37 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ~NGL~ Sent: Tuesday, October 29, 2013 2:35 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 11:19 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
With new firmware and a reset config I think it has to be your machine. Nothing should persist after those two actions. Have you tried a second computer? How about a mobile phone? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:48 PM, ~NGL~ n...@ngl.net wrote: ** I have downloaded the and installed the firmware and reset the config. No Help NGL *From:* Steve Barnes st...@pcswin.com *Sent:* Tuesday, October 29, 2013 11:37 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. ** ** *Steve Barnes* General Manager PCSWIN.com Howard LLC. ** ** *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *~NGL~ *Sent:* Tuesday, October 29, 2013 2:35 PM *To:* WISPA General List *Subject:* Re: [WISPA] Setting up Nanostations ** ** No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 11:19 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 10:08 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL *From:* Mike Hammett wispawirel...@ics-il.net *Sent:* Tuesday, October 29, 2013 9:55 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ** ** -- *From: *~NGL~ n...@ngl.net *To: *WISPA General List wireless@wispa.org *Sent: *Tuesday, October 29, 2013 11:56:51 AM *Subject: *Re: [WISPA] Setting up Nanostations IE 8 *From:* Josh Luthman j...@imaginenetworksllc.com *Sent:* Tuesday, October 29, 2013 9:54 AM *To:* WISPA General List wireless@wispa.org *Subject:* Re: [WISPA] Setting up Nanostations ** ** What browser are you using? ** ** Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ** ** On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** -- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ** ** -- ___ Wireless mailing list
Re: [WISPA] Setting up Nanostations
What firmware version are you using? — Sent from Mailbox for iPhone On Tue, Oct 29, 2013 at 2:49 PM, ~NGL~ n...@ngl.net wrote: I have downloaded the and installed the firmware and reset the config. No Help NGL From: Steve Barnes Sent: Tuesday, October 29, 2013 11:37 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ~NGL~ Sent: Tuesday, October 29, 2013 2:35 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 11:19 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless --
Re: [WISPA] Setting up Nanostations
The latest, the same that was on it. NGL From: timothy steele Sent: Tuesday, October 29, 2013 12:05 PM To: WISPA General List Cc: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What firmware version are you using? — Sent from Mailbox for iPhone On Tue, Oct 29, 2013 at 2:49 PM, ~NGL~ n...@ngl.net wrote: I have downloaded the and installed the firmware and reset the config. No Help NGL From: Steve Barnes Sent: Tuesday, October 29, 2013 11:37 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ~NGL~ Sent: Tuesday, October 29, 2013 2:35 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 11:19 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL image001.gif If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] Setting up Nanostations
This is the third machine. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 12:04 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations With new firmware and a reset config I think it has to be your machine. Nothing should persist after those two actions. Have you tried a second computer? How about a mobile phone? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:48 PM, ~NGL~ n...@ngl.net wrote: I have downloaded the and installed the firmware and reset the config. No Help NGL From: Steve Barnes Sent: Tuesday, October 29, 2013 11:37 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ~NGL~ Sent: Tuesday, October 29, 2013 2:35 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 11:19 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier! ___ Wireless mailing list Wireless@wispa.org
Re: [WISPA] Setting up Nanostations
Hold reset down for 10 sec that will do a TFTP factory reset after all light start blinking reboot it do at your own risk — Sent from Mailbox for iPhone On Tue, Oct 29, 2013 at 3:43 PM, ~NGL~ n...@ngl.net wrote: This is the third machine. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 12:04 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations With new firmware and a reset config I think it has to be your machine. Nothing should persist after those two actions. Have you tried a second computer? How about a mobile phone? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:48 PM, ~NGL~ n...@ngl.net wrote: I have downloaded the and installed the firmware and reset the config. No Help NGL From: Steve Barnes Sent: Tuesday, October 29, 2013 11:37 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Had this issue a few weeks ago. Had to down flash the firmware then upgrade to get it working. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ~NGL~ Sent: Tuesday, October 29, 2013 2:35 PM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations No auto filling Yes Incognito Tab This is setup on a radio only basis No Network. New Chrome installation. NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 11:19 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations It also kind of sounds like you might have two devices with the same IP (hence the login requirement again). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Is it auto filling? Did you use an Incognito Tab? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ n...@ngl.net wrote: Same results with Chrome. What now? NGL From: Josh Luthman Sent: Tuesday, October 29, 2013 10:08 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations Try Chrome. If it fixes it, that's your problem. If it doesn't, there are other things you can try. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ n...@ngl.net wrote: I have been using IE on all makes of radios for several years with no problem. If I have to I will. NGL From: Mike Hammett Sent: Tuesday, October 29, 2013 9:55 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations On purpose? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: ~NGL~ n...@ngl.net To: WISPA General List wireless@wispa.org Sent: Tuesday, October 29, 2013 11:56:51 AM Subject: Re: [WISPA] Setting up Nanostations IE 8 From: Josh Luthman Sent: Tuesday, October 29, 2013 9:54 AM To: WISPA General List Subject: Re: [WISPA] Setting up Nanostations What browser are you using? Try Chrome in Incognito mode, see if you can reproduce it there. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ n...@ngl.net wrote: I have 2 Nanostations M2 that will not save a SSID change. When I change it click on change, then apply and click on the Main tab it goes to the login page. I login and the SSID is back to the default. What is going on? NGL If you can read this Thank A Teacher. And if it's in English Thank A Soldier!
Re: [WISPA] Tower
Craig 100 foot in guyed and 75 in freestanding. Complete kits are ok. Thanks, Brian On 10/27/2013 7:31 PM, Craig House wrote: Brian. What heights are you looking for? I can get them for you and have them shipped within a week generally. Are you looking for complete kits with base plate or bottom section and with top sections? Complete kits include turnbuckles, thimbles, cable, big grips, ground rods, tension brackets, anchors etc. Let me know what you need I can get you pricing. Need to know what your looking for in freestanding sizes as well. Craig - Original Message - From: Brian brian_wi...@splashin.net To: WISPA General List wireless@wispa.org Sent: Sunday, October 27, 2013 7:26:09 PM Subject: [WISPA] Tower I'm looking for Rohn 45G or equivalent. I'm also looking for some inexpensive free standing towers aswell. I can remove some of the smaller towers myself. Thanks, Brian ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless