Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
FYI Shipment came in and they fit in the RB 532 holes perfect AND the card will fit under the board with mmcx pigtail and there is room (about 1/16 inch). Looks good to me. Brian Brian Rohrbacher wrote: https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware They have them in stock now. I remember there was some talk about these a while ago. $50 min order so I just got 400 or so of the self adhesive PCB supports. I got the 5/8 standoff (should be able to fit the cards under the board too) I don't need 400, so if anyone wants a few, let me know. Otherwise, just letting ya'll know they are in stock. www.microplastics.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Me, too. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: George Rogato <[EMAIL PROTECTED]> To: WISPA General List Sent: Sun, 27 Aug 2006 20:31:38 -0700 Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > I've used these guys for grounding the shield of a cat5 cable: > > http://www.oregonfast.net/gofast/Spruce/4460-D%20Shield%20connector-1.pdf > > Eric Rogers wrote: > > I was just referring to the shielding by bonding it to the cat5 crimp on > > ends, not soldiering them to the tower or grounding materials. There is > > only a friction bond between the cat5 end and the grounded casing of the > > surge arrestor. I would think the friction bond would have more > > resistance in a strike, causing it to heat up faster than the resistance > > of the soldier. > > > > > > > [WINDOWS-1252?]> Again, with millions of volts, I dont think the Cat5 cable would hold > > it as well. The key to the whole system is the grounding to the tower > [WINDOWS-1252?]> site itself. In this case, there are 3 runs of 5/8 or larger copper > > running from the grounding grid to the very top of the tower and 2 cad > > welded to the tower base and the grounding grid. Hopefully the > > lightning will choose the path of the copper or tower, and not my run of > > cat5. The shielding and soldier is only to dissipate static buildup and > > keep the potential voltages as close to equal as I can. > > > > > > > [WINDOWS-1252?]> My thoughts are that if the antennas and equipment at the top are > > grounded to the tower, the equipment at the bottom, and all the surge > > suppression for the cat5 and coax runs are all grounded to the same > > ground plane, the potential voltage difference between any one location > > should be near 0, and there should be no need for it to travel up/down > > my cat5 run. > > > > > > > > Hopefully it will never need to go through my soldier joint or the > > pressure of the spring steel in the surge suppression. :) > > > > > > > > Eric > > > > > > > > > > > > ------------------------ > > > > *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > *On Behalf Of *Scott Reed > > *Sent:* Sunday, August 27, 2006 5:07 PM > > *To:* WISPA General List > > *Subject:* RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > > > > > > > I believe that solder is probably not a good idea here. Lightning can > > build enough heat to melt the solder and thus break the connection. I > > think all ground connections need to be physical connections to provide > > the best protection. > > > > Otherwise, this looks like a good method. > > > > There are several devices designed to give mechanical and electrical > > connection to shields, etc. > > > > Scott Reed > > Owner > > NewWays > > Wireless Networking > > Network Design, Installation and Administration > > www.nwwnet.net <http://www.nwwnet.net/> > > > > > > *-- Original Message ---* > > From: "Eric Rogers" <[EMAIL PROTECTED]> > > To: "WISPA General List" > > Sent: Sun, 27 Aug 2006 14:36:16 -0400 > > Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > > >> I myself use them at our tower sites at the bottom AND the top. I had a > >> tower get struck, directly and lost everything...including the switch at > >> the location. Since then, I figured 3mil volts can go through thin > >> cat5e jacketing. Even through the shielding if it isn't properly > >> grounded. Now I soldier the casings onto the crimp on ends when > >> possible so hopefully it will go to ground without hitting the copper > >> inside. I use the Hyperlink surge protection, and the keystone jacks > >> are for shielded cabling, so it goes to ground. The surge suppression > >> is just added protection. Remember, electricity takes the least path of > >> resistance, when metal heats up, it becomes more resistant. So tha
Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I've used these guys for grounding the shield of a cat5 cable: http://www.oregonfast.net/gofast/Spruce/4460-D%20Shield%20connector-1.pdf Eric Rogers wrote: I was just referring to the shielding by bonding it to the cat5 crimp on ends, not soldiering them to the tower or grounding materials. There is only a friction bond between the cat5 end and the grounded casing of the surge arrestor. I would think the friction bond would have more resistance in a strike, causing it to heat up faster than the resistance of the soldier. Again, with millions of volts, I don’t think the Cat5 cable would hold it as well. The key to the whole system is the grounding to the tower site itself. In this case, there are 3 runs of 5/8” or larger copper running from the grounding grid to the very top of the tower and 2 cad welded to the tower base and the grounding grid. Hopefully the lightning will choose the path of the copper or tower, and not my run of cat5. The shielding and soldier is only to dissipate static buildup and keep the potential voltages as close to equal as I can. My thoughts are that if the antenna’s and equipment at the top are grounded to the tower, the equipment at the bottom, and all the surge suppression for the cat5 and coax runs are all grounded to the same ground plane, the potential voltage difference between any one location should be near 0, and there should be no need for it to travel up/down my cat5 run. Hopefully it will never need to go through my soldier joint or the pressure of the spring steel in the surge suppression. :) Eric *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Scott Reed *Sent:* Sunday, August 27, 2006 5:07 PM *To:* WISPA General List *Subject:* RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I believe that solder is probably not a good idea here. Lightning can build enough heat to melt the solder and thus break the connection. I think all ground connections need to be physical connections to provide the best protection. Otherwise, this looks like a good method. There are several devices designed to give mechanical and electrical connection to shields, etc. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net <http://www.nwwnet.net/> *-- Original Message ---* From: "Eric Rogers" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Sun, 27 Aug 2006 14:36:16 -0400 Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I myself use them at our tower sites at the bottom AND the top. I had a tower get struck, directly and lost everything...including the switch at the location. Since then, I figured 3mil volts can go through thin cat5e jacketing. Even through the shielding if it isn't properly grounded. Now I soldier the casings onto the crimp on ends when possible so hopefully it will go to ground without hitting the copper inside. I use the Hyperlink surge protection, and the keystone jacks are for shielded cabling, so it goes to ground. The surge suppression is just added protection. Remember, electricity takes the least path of resistance, when metal heats up, it becomes more resistant. So that bolt of lightning can go where it wants... That said, I am giving the electricity 2 points to exit to ground, so hopefully I don't lose any more equipment. The tower is WELL grounded, it is an old AT&T sight, with the copper mesh in the ground, and all buildings and towers have copper 5/8" or larger going up the sides and cad welded to them and also to the grid below ground. LOTS of money... I don't at the CPE, just use the built-in surge suppression and definitely ground the CPE for static. I see it as if the house gets struck by lightning; they have more to worry about than internet... Now if a tower gets struck, I have hundreds down, not 1. Eric Rogers -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Sunday, August 27, 2006 12:00 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik Do you find that a surge supressor at the CPE is better then at the internal PC/Router/Switch? Or do you use one at each end? Jeromie Harold Bledsoe wrote: >I can answer some of these... > >It looks like a Zinwell B191 RTL8181 with a Citel indoor surge >protector. > >-Hal > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Jeromie Reeves >Sent: Saturday, August 26, 2006 9:24 PM >To: WISPA General List >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > >Looks good. What radio are you using with what looks to be a Realt
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I was just referring to the shielding by bonding it to the cat5 crimp on ends, not soldiering them to the tower or grounding materials. There is only a friction bond between the cat5 end and the grounded casing of the surge arrestor. I would think the friction bond would have more resistance in a strike, causing it to heat up faster than the resistance of the soldier. Again, with millions of volts, I don’t think the Cat5 cable would hold it as well. The key to the whole system is the grounding to the tower site itself. In this case, there are 3 runs of 5/8” or larger copper running from the grounding grid to the very top of the tower and 2 cad welded to the tower base and the grounding grid. Hopefully the lightning will choose the path of the copper or tower, and not my run of cat5. The shielding and soldier is only to dissipate static buildup and keep the potential voltages as close to equal as I can. My thoughts are that if the antenna’s and equipment at the top are grounded to the tower, the equipment at the bottom, and all the surge suppression for the cat5 and coax runs are all grounded to the same ground plane, the potential voltage difference between any one location should be near 0, and there should be no need for it to travel up/down my cat5 run. Hopefully it will never need to go through my soldier joint or the pressure of the spring steel in the surge suppression. :) Eric From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Reed Sent: Sunday, August 27, 2006 5:07 PM To: WISPA General List Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I believe that solder is probably not a good idea here. Lightning can build enough heat to melt the solder and thus break the connection. I think all ground connections need to be physical connections to provide the best protection. Otherwise, this looks like a good method. There are several devices designed to give mechanical and electrical connection to shields, etc. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: "Eric Rogers" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Sun, 27 Aug 2006 14:36:16 -0400 Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > I myself use them at our tower sites at the bottom AND the top. I had a > tower get struck, directly and lost everything...including the switch at > the location. Since then, I figured 3mil volts can go through thin > cat5e jacketing. Even through the shielding if it isn't properly > grounded. Now I soldier the casings onto the crimp on ends when > possible so hopefully it will go to ground without hitting the copper > inside. I use the Hyperlink surge protection, and the keystone jacks > are for shielded cabling, so it goes to ground. The surge suppression > is just added protection. Remember, electricity takes the least path of > resistance, when metal heats up, it becomes more resistant. So that > bolt of lightning can go where it wants... > > That said, I am giving the electricity 2 points to exit to ground, so > hopefully I don't lose any more equipment. > > The tower is WELL grounded, it is an old AT&T sight, with the copper > mesh in the ground, and all buildings and towers have copper 5/8" or > larger going up the sides and cad welded to them and also to the grid > below ground. LOTS of money... > > I don't at the CPE, just use the built-in surge suppression and > definitely ground the CPE for static. I see it as if the house gets > struck by lightning; they have more to worry about than internet... Now > if a tower gets struck, I have hundreds down, not 1. > > Eric Rogers > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Jeromie Reeves > Sent: Sunday, August 27, 2006 12:00 PM > To: WISPA General List > Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > Do you find that a surge supressor at the CPE is better then at the > internal PC/Router/Switch? Or do > you use one at each end? > > Jeromie > > Harold Bledsoe wrote: > > >I can answer some of these... > > > >It looks like a Zinwell B191 RTL8181 with a Citel indoor surge > >protector. > > > >-Hal > > > >-----Original Message- > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >Behalf Of Jeromie Reeves > >Sent: Saturday, August 26, 2006 9:24 PM > >To: WISPA General List > >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > > >Looks good. What radio are you using with
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Connectors I use 010-108 from www.cablesforless.com https://www.cablesforless.com/index.asp?PageAction=VIEWPROD&ProdID=794. I buy a lot of patch cables and things from them because they are fairly cheap and they are local (2 miles away). I try and promote local business when I can. I get the cable from www.cat5ecableguy.com. Two different part numbers... http://www.cat5cableguy.com/inc/sdetail/12771 or http://www.cat5cableguy.com/inc/sdetail/12770. Eric -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ken Chipps Sent: Sunday, August 27, 2006 2:56 PM To: 'WISPA General List' Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik What brand and part number cable and connectors do you use for the CAT5E cable? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Rogers Sent: Sunday, August 27, 2006 1:36 PM To: WISPA General List Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I myself use them at our tower sites at the bottom AND the top. I had a tower get struck, directly and lost everything...including the switch at the location. Since then, I figured 3mil volts can go through thin cat5e jacketing. Even through the shielding if it isn't properly grounded. Now I soldier the casings onto the crimp on ends when possible so hopefully it will go to ground without hitting the copper inside. I use the Hyperlink surge protection, and the keystone jacks are for shielded cabling, so it goes to ground. The surge suppression is just added protection. Remember, electricity takes the least path of resistance, when metal heats up, it becomes more resistant. So that bolt of lightning can go where it wants... That said, I am giving the electricity 2 points to exit to ground, so hopefully I don't lose any more equipment. The tower is WELL grounded, it is an old AT&T sight, with the copper mesh in the ground, and all buildings and towers have copper 5/8" or larger going up the sides and cad welded to them and also to the grid below ground. LOTS of money... I don't at the CPE, just use the built-in surge suppression and definitely ground the CPE for static. I see it as if the house gets struck by lightning; they have more to worry about than internet... Now if a tower gets struck, I have hundreds down, not 1. Eric Rogers -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Sunday, August 27, 2006 12:00 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik Do you find that a surge supressor at the CPE is better then at the internal PC/Router/Switch? Or do you use one at each end? Jeromie Harold Bledsoe wrote: >I can answer some of these... > >It looks like a Zinwell B191 RTL8181 with a Citel indoor surge >protector. > >-Hal > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Jeromie Reeves >Sent: Saturday, August 26, 2006 9:24 PM >To: WISPA General List >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > >Looks good. What radio are you using with what looks to be a Realtek >SoC? Is that >a PoE splitter, a surge supressor, or both? How long is that RF pigtail? > >Jeromie > >Brian Rohrbacher wrote: > > > >>I take a self tapper and run it out the bottom of my metal box, attach >> >> > > > >>a #12 piggy tail, and attach the other end through a hole on the >>board. Kind of like the attached pic. Should work, eh? >> >>Brian >> >>Harold Bledsoe wrote: >> >> >> >>>One word to the wise on these: many PCBs are grounded through the >>>screw holes. If you are using plastic standoffs, you may want to >>>consider grounding the board some other way... >>> >>>-Hal >>> >>>-------------- >>>Harold Bledsoe >>>Deliberant Wireless >>>http://www.deliberant.com >>> >>> >>> >>>From: [EMAIL PROTECTED] on behalf of Mark Nash >>>Sent: Fri 8/25/2006 1:04 PM >>>To: WISPA General List >>>Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >>> >>> >>> >>>I'll take some... Catch me offlist. >>> >>>Mark >>>-Original Message- >>>From: Brian Rohrbacher <[EMAIL PROTECTED]> >>>Date: Fri, 25 Aug 2006 11:21:57 >>>To:Conversations over a new WISP Trade Organization >>>, [EMAIL PROTECTED] >>>Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >>> >>> >>> >>> >
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I believe that solder is probably not a good idea here. Lightning can build enough heat to melt the solder and thus break the connection. I think all ground connections need to be physical connections to provide the best protection. Otherwise, this looks like a good method. There are several devices designed to give mechanical and electrical connection to shields, etc. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: "Eric Rogers" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Sun, 27 Aug 2006 14:36:16 -0400 Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > I myself use them at our tower sites at the bottom AND the top. I had a > tower get struck, directly and lost everything...including the switch at > the location. Since then, I figured 3mil volts can go through thin > cat5e jacketing. Even through the shielding if it isn't properly > grounded. Now I soldier the casings onto the crimp on ends when > possible so hopefully it will go to ground without hitting the copper > inside. I use the Hyperlink surge protection, and the keystone jacks > are for shielded cabling, so it goes to ground. The surge suppression > is just added protection. Remember, electricity takes the least path of > resistance, when metal heats up, it becomes more resistant. So that > bolt of lightning can go where it wants... > > That said, I am giving the electricity 2 points to exit to ground, so > hopefully I don't lose any more equipment. > > The tower is WELL grounded, it is an old AT&T sight, with the copper > mesh in the ground, and all buildings and towers have copper 5/8" or > larger going up the sides and cad welded to them and also to the grid > below ground. LOTS of money... > > I don't at the CPE, just use the built-in surge suppression and > definitely ground the CPE for static. I see it as if the house gets > struck by lightning; they have more to worry about than internet... Now > if a tower gets struck, I have hundreds down, not 1. > > Eric Rogers > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Jeromie Reeves > Sent: Sunday, August 27, 2006 12:00 PM > To: WISPA General List > Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > Do you find that a surge supressor at the CPE is better then at the > internal PC/Router/Switch? Or do > you use one at each end? > > Jeromie > > Harold Bledsoe wrote: > > >I can answer some of these... > > > >It looks like a Zinwell B191 RTL8181 with a Citel indoor surge > >protector. > > > >-Hal > > > >-Original Message- > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >Behalf Of Jeromie Reeves > >Sent: Saturday, August 26, 2006 9:24 PM > >To: WISPA General List > >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > > >Looks good. What radio are you using with what looks to be a Realtek > >SoC? Is that > >a PoE splitter, a surge supressor, or both? How long is that RF > pigtail? > > > >Jeromie > > > >Brian Rohrbacher wrote: > > > > > > > >>I take a self tapper and run it out the bottom of my metal box, attach > >> > >> > > > > > > > >>a #12 piggy tail, and attach the other end through a hole on the > >>board. Kind of like the attached pic. Should work, eh? > >> > >>Brian > >> > >>Harold Bledsoe wrote: > >> > >> > >> > >>>One word to the wise on these: many PCBs are grounded through the > >>>screw holes. If you are using plastic standoffs, you may want to > >>>consider grounding the board some other way... > >>> > >>>-Hal > >>> > >>>-- > >>>Harold Bledsoe > >>>Deliberant Wireless > >>>http://www.deliberant.com > >>> > >>> > >>> > >>>From: [EMAIL PROTECTED] on behalf of Mark Nash > >>>Sent: Fri 8/25/2006 1:04 PM > >>>To: WISPA General List > >>>Subject: Re: [WISPA] Self Adhesive Mi
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
What brand and part number cable and connectors do you use for the CAT5E cable? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Rogers Sent: Sunday, August 27, 2006 1:36 PM To: WISPA General List Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I myself use them at our tower sites at the bottom AND the top. I had a tower get struck, directly and lost everything...including the switch at the location. Since then, I figured 3mil volts can go through thin cat5e jacketing. Even through the shielding if it isn't properly grounded. Now I soldier the casings onto the crimp on ends when possible so hopefully it will go to ground without hitting the copper inside. I use the Hyperlink surge protection, and the keystone jacks are for shielded cabling, so it goes to ground. The surge suppression is just added protection. Remember, electricity takes the least path of resistance, when metal heats up, it becomes more resistant. So that bolt of lightning can go where it wants... That said, I am giving the electricity 2 points to exit to ground, so hopefully I don't lose any more equipment. The tower is WELL grounded, it is an old AT&T sight, with the copper mesh in the ground, and all buildings and towers have copper 5/8" or larger going up the sides and cad welded to them and also to the grid below ground. LOTS of money... I don't at the CPE, just use the built-in surge suppression and definitely ground the CPE for static. I see it as if the house gets struck by lightning; they have more to worry about than internet... Now if a tower gets struck, I have hundreds down, not 1. Eric Rogers -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Sunday, August 27, 2006 12:00 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik Do you find that a surge supressor at the CPE is better then at the internal PC/Router/Switch? Or do you use one at each end? Jeromie Harold Bledsoe wrote: >I can answer some of these... > >It looks like a Zinwell B191 RTL8181 with a Citel indoor surge >protector. > >-Hal > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Jeromie Reeves >Sent: Saturday, August 26, 2006 9:24 PM >To: WISPA General List >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > >Looks good. What radio are you using with what looks to be a Realtek >SoC? Is that >a PoE splitter, a surge supressor, or both? How long is that RF pigtail? > >Jeromie > >Brian Rohrbacher wrote: > > > >>I take a self tapper and run it out the bottom of my metal box, attach >> >> > > > >>a #12 piggy tail, and attach the other end through a hole on the >>board. Kind of like the attached pic. Should work, eh? >> >>Brian >> >>Harold Bledsoe wrote: >> >> >> >>>One word to the wise on these: many PCBs are grounded through the >>>screw holes. If you are using plastic standoffs, you may want to >>>consider grounding the board some other way... >>> >>>-Hal >>> >>>------ >>>Harold Bledsoe >>>Deliberant Wireless >>>http://www.deliberant.com >>> >>> >>> >>>From: [EMAIL PROTECTED] on behalf of Mark Nash >>>Sent: Fri 8/25/2006 1:04 PM >>>To: WISPA General List >>>Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >>> >>> >>> >>>I'll take some... Catch me offlist. >>> >>>Mark >>>-Original Message- >>>From: Brian Rohrbacher <[EMAIL PROTECTED]> >>>Date: Fri, 25 Aug 2006 11:21:57 >>>To:Conversations over a new WISP Trade Organization >>>, [EMAIL PROTECTED] >>>Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >>> >>> >>> >>> >https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam = >cbhardware > > >>>They have them in stock now. I remember there was some talk about >>> >>> >these > > >>>a while ago. >>>$50 min order so I just got 400 or so of the self adhesive PCB >>> >>> >supports. > > >>>I got the 5/8 standoff (should be able to fit the cards under the >>>board too) >>> >>>I don't need 400, so if anyone wants a few, let me know. >>> >>>Otherwise, just letting ya'll know they are in stock. >>> >>>www.m
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I myself use them at our tower sites at the bottom AND the top. I had a tower get struck, directly and lost everything...including the switch at the location. Since then, I figured 3mil volts can go through thin cat5e jacketing. Even through the shielding if it isn't properly grounded. Now I soldier the casings onto the crimp on ends when possible so hopefully it will go to ground without hitting the copper inside. I use the Hyperlink surge protection, and the keystone jacks are for shielded cabling, so it goes to ground. The surge suppression is just added protection. Remember, electricity takes the least path of resistance, when metal heats up, it becomes more resistant. So that bolt of lightning can go where it wants... That said, I am giving the electricity 2 points to exit to ground, so hopefully I don't lose any more equipment. The tower is WELL grounded, it is an old AT&T sight, with the copper mesh in the ground, and all buildings and towers have copper 5/8" or larger going up the sides and cad welded to them and also to the grid below ground. LOTS of money... I don't at the CPE, just use the built-in surge suppression and definitely ground the CPE for static. I see it as if the house gets struck by lightning; they have more to worry about than internet... Now if a tower gets struck, I have hundreds down, not 1. Eric Rogers -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Sunday, August 27, 2006 12:00 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik Do you find that a surge supressor at the CPE is better then at the internal PC/Router/Switch? Or do you use one at each end? Jeromie Harold Bledsoe wrote: >I can answer some of these... > >It looks like a Zinwell B191 RTL8181 with a Citel indoor surge >protector. > >-Hal > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Jeromie Reeves >Sent: Saturday, August 26, 2006 9:24 PM >To: WISPA General List >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > >Looks good. What radio are you using with what looks to be a Realtek >SoC? Is that >a PoE splitter, a surge supressor, or both? How long is that RF pigtail? > >Jeromie > >Brian Rohrbacher wrote: > > > >>I take a self tapper and run it out the bottom of my metal box, attach >> >> > > > >>a #12 piggy tail, and attach the other end through a hole on the >>board. Kind of like the attached pic. Should work, eh? >> >>Brian >> >>Harold Bledsoe wrote: >> >> >> >>>One word to the wise on these: many PCBs are grounded through the >>>screw holes. If you are using plastic standoffs, you may want to >>>consider grounding the board some other way... >>> >>>-Hal >>> >>>------ >>>Harold Bledsoe >>>Deliberant Wireless >>>http://www.deliberant.com >>> >>> >>> >>>From: [EMAIL PROTECTED] on behalf of Mark Nash >>>Sent: Fri 8/25/2006 1:04 PM >>>To: WISPA General List >>>Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >>> >>> >>> >>>I'll take some... Catch me offlist. >>> >>>Mark >>>-Original Message- >>>From: Brian Rohrbacher <[EMAIL PROTECTED]> >>>Date: Fri, 25 Aug 2006 11:21:57 >>>To:Conversations over a new WISP Trade Organization >>>, [EMAIL PROTECTED] >>>Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >>> >>> >>> >>> >https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam = >cbhardware > > >>>They have them in stock now. I remember there was some talk about >>> >>> >these > > >>>a while ago. >>>$50 min order so I just got 400 or so of the self adhesive PCB >>> >>> >supports. > > >>>I got the 5/8 standoff (should be able to fit the cards under the >>>board too) >>> >>>I don't need 400, so if anyone wants a few, let me know. >>> >>>Otherwise, just letting ya'll know they are in stock. >>> >>>www.microplastics.com >>>-- >>>WISPA Wireless List: wireless@wispa.org >>> >>>Subscribe/Unsubscribe: >>>http://lists.wispa.org/mailman/listinfo/wireless >>> >>>Archives: http://lists.wispa.org/pipermail/wireless/ >>>-- >>>WISPA Wireless List: wireless@wispa.org >>> >>>Subscribe/Unsubscribe: >>>http://lists.wispa.org/mailman/listinfo/wireless >>> >>>Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> >>> >>> >> >> >--- - > > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Do you find that a surge supressor at the CPE is better then at the internal PC/Router/Switch? Or do you use one at each end? Jeromie Harold Bledsoe wrote: I can answer some of these... It looks like a Zinwell B191 RTL8181 with a Citel indoor surge protector. -Hal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Saturday, August 26, 2006 9:24 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik Looks good. What radio are you using with what looks to be a Realtek SoC? Is that a PoE splitter, a surge supressor, or both? How long is that RF pigtail? Jeromie Brian Rohrbacher wrote: I take a self tapper and run it out the bottom of my metal box, attach a #12 piggy tail, and attach the other end through a hole on the board. Kind of like the attached pic. Should work, eh? Brian Harold Bledsoe wrote: One word to the wise on these: many PCBs are grounded through the screw holes. If you are using plastic standoffs, you may want to consider grounding the board some other way... -Hal -- Harold Bledsoe Deliberant Wireless http://www.deliberant.com From: [EMAIL PROTECTED] on behalf of Mark Nash Sent: Fri 8/25/2006 1:04 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I'll take some... Catch me offlist. Mark -Original Message- From: Brian Rohrbacher <[EMAIL PROTECTED]> Date: Fri, 25 Aug 2006 11:21:57 To:Conversations over a new WISP Trade Organization , [EMAIL PROTECTED] Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam= cbhardware They have them in stock now. I remember there was some talk about these a while ago. $50 min order so I just got 400 or so of the self adhesive PCB supports. I got the 5/8 standoff (should be able to fit the cards under the board too) I don't need 400, so if anyone wants a few, let me know. Otherwise, just letting ya'll know they are in stock. www.microplastics.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I can answer some of these... It looks like a Zinwell B191 RTL8181 with a Citel indoor surge protector. -Hal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Saturday, August 26, 2006 9:24 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik Looks good. What radio are you using with what looks to be a Realtek SoC? Is that a PoE splitter, a surge supressor, or both? How long is that RF pigtail? Jeromie Brian Rohrbacher wrote: > I take a self tapper and run it out the bottom of my metal box, attach > a #12 piggy tail, and attach the other end through a hole on the > board. Kind of like the attached pic. Should work, eh? > > Brian > > Harold Bledsoe wrote: > >> One word to the wise on these: many PCBs are grounded through the >> screw holes. If you are using plastic standoffs, you may want to >> consider grounding the board some other way... >> >> -Hal >> >> -- >> Harold Bledsoe >> Deliberant Wireless >> http://www.deliberant.com >> >> >> >> From: [EMAIL PROTECTED] on behalf of Mark Nash >> Sent: Fri 8/25/2006 1:04 PM >> To: WISPA General List >> Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >> >> >> >> I'll take some... Catch me offlist. >> >> Mark >> -Original Message- >> From: Brian Rohrbacher <[EMAIL PROTECTED]> >> Date: Fri, 25 Aug 2006 11:21:57 >> To:Conversations over a new WISP Trade Organization >> , [EMAIL PROTECTED] >> Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik >> >> https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam= cbhardware >> >> >> They have them in stock now. I remember there was some talk about these >> a while ago. >> $50 min order so I just got 400 or so of the self adhesive PCB supports. >> I got the 5/8 standoff (should be able to fit the cards under the >> board too) >> >> I don't need 400, so if anyone wants a few, let me know. >> >> Otherwise, just letting ya'll know they are in stock. >> >> www.microplastics.com >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Looks good. What radio are you using with what looks to be a Realtek SoC? Is that a PoE splitter, a surge supressor, or both? How long is that RF pigtail? Jeromie Brian Rohrbacher wrote: I take a self tapper and run it out the bottom of my metal box, attach a #12 piggy tail, and attach the other end through a hole on the board. Kind of like the attached pic. Should work, eh? Brian Harold Bledsoe wrote: One word to the wise on these: many PCBs are grounded through the screw holes. If you are using plastic standoffs, you may want to consider grounding the board some other way... -Hal -- Harold Bledsoe Deliberant Wireless http://www.deliberant.com From: [EMAIL PROTECTED] on behalf of Mark Nash Sent: Fri 8/25/2006 1:04 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I'll take some... Catch me offlist. Mark -Original Message- From: Brian Rohrbacher <[EMAIL PROTECTED]> Date: Fri, 25 Aug 2006 11:21:57 To:Conversations over a new WISP Trade Organization , [EMAIL PROTECTED] Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware They have them in stock now. I remember there was some talk about these a while ago. $50 min order so I just got 400 or so of the self adhesive PCB supports. I got the 5/8 standoff (should be able to fit the cards under the board too) I don't need 400, so if anyone wants a few, let me know. Otherwise, just letting ya'll know they are in stock. www.microplastics.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I run that wire around to the mounting bracket. Gets it all connected to tower. Then, if tower is not grounded, bond it to known good ground. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: "Harold Bledsoe" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Sat, 26 Aug 2006 15:38:03 -0400 Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > Perfect! :-) > > -Hal > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Brian Rohrbacher > Sent: Friday, August 25, 2006 9:17 PM > To: WISPA General List > Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > I take a self tapper and run it out the bottom of my metal box, attach a > > #12 piggy tail, and attach the other end through a hole on the board. > Kind of like the attached pic. Should work, eh? > > Brian > > Harold Bledsoe wrote: > > >One word to the wise on these: many PCBs are grounded through the > screw holes. If you are using plastic standoffs, you may want to > consider grounding the board some other way... > > > >-Hal > > > >-- > >Harold Bledsoe > >Deliberant Wireless > >http://www.deliberant.com > > > >____________ > > > >From: [EMAIL PROTECTED] on behalf of Mark Nash > >Sent: Fri 8/25/2006 1:04 PM > >To: WISPA General List > >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > > > > > > >I'll take some... Catch me offlist. > > > >Mark > >-Original Message- > >From: Brian Rohrbacher <[EMAIL PROTECTED]> > >Date: Fri, 25 Aug 2006 11:21:57 > >To:Conversations over a new WISP Trade Organization > , [EMAIL PROTECTED] > >Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > > >https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam > =cbhardware > > > >They have them in stock now. I remember there was some talk about > these > >a while ago. > >$50 min order so I just got 400 or so of the self adhesive PCB > supports. > >I got the 5/8 standoff (should be able to fit the cards under the board > too) > > > >I don't need 400, so if anyone wants a few, let me know. > > > >Otherwise, just letting ya'll know they are in stock. > > > >www.microplastics.com > >-- > >WISPA Wireless List: wireless@wispa.org > > > >Subscribe/Unsubscribe: > >http://lists.wispa.org/mailman/listinfo/wireless > > > >Archives: http://lists.wispa.org/pipermail/wireless/ > >-- > >WISPA Wireless List: wireless@wispa.org > > > >Subscribe/Unsubscribe: > >http://lists.wispa.org/mailman/listinfo/wireless > > > >Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ --- End of Original Message --- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Nice work Brian. You can always tell when someone cares about their work. George Brian Rohrbacher wrote: I take a self tapper and run it out the bottom of my metal box, attach a #12 piggy tail, and attach the other end through a hole on the board. Kind of like the attached pic. Should work, eh? Brian Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Perfect! :-) -Hal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: Friday, August 25, 2006 9:17 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I take a self tapper and run it out the bottom of my metal box, attach a #12 piggy tail, and attach the other end through a hole on the board. Kind of like the attached pic. Should work, eh? Brian Harold Bledsoe wrote: >One word to the wise on these: many PCBs are grounded through the screw holes. If you are using plastic standoffs, you may want to consider grounding the board some other way... > >-Hal > >-- >Harold Bledsoe >Deliberant Wireless >http://www.deliberant.com > > > >From: [EMAIL PROTECTED] on behalf of Mark Nash >Sent: Fri 8/25/2006 1:04 PM >To: WISPA General List >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > > > >I'll take some... Catch me offlist. > >Mark >-Original Message- >From: Brian Rohrbacher <[EMAIL PROTECTED]> >Date: Fri, 25 Aug 2006 11:21:57 >To:Conversations over a new WISP Trade Organization , [EMAIL PROTECTED] >Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik > >https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam =cbhardware > >They have them in stock now. I remember there was some talk about these >a while ago. >$50 min order so I just got 400 or so of the self adhesive PCB supports. >I got the 5/8 standoff (should be able to fit the cards under the board too) > >I don't need 400, so if anyone wants a few, let me know. > >Otherwise, just letting ya'll know they are in stock. > >www.microplastics.com >-- >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ >-- >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
wow. Got way too many requests for these. I talked to 2 people and between the 3 of us my order will be gone. I could order more but I don't want to feel like I am really selling these, especially using the lists. Someone else from here ought to get 1000 from microplastics and divide them up. It's like $111 for 1,000 I believe. Anyway, this is my response to all who hit me on or offlist. My order is gone. Brian Brian Rohrbacher wrote: https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware They have them in stock now. I remember there was some talk about these a while ago. $50 min order so I just got 400 or so of the self adhesive PCB supports. I got the 5/8 standoff (should be able to fit the cards under the board too) I don't need 400, so if anyone wants a few, let me know. Otherwise, just letting ya'll know they are in stock. www.microplastics.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
One word to the wise on these: many PCBs are grounded through the screw holes. If you are using plastic standoffs, you may want to consider grounding the board some other way... -Hal -- Harold Bledsoe Deliberant Wireless http://www.deliberant.com From: [EMAIL PROTECTED] on behalf of Mark Nash Sent: Fri 8/25/2006 1:04 PM To: WISPA General List Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik I'll take some... Catch me offlist. Mark -Original Message- From: Brian Rohrbacher <[EMAIL PROTECTED]> Date: Fri, 25 Aug 2006 11:21:57 To:Conversations over a new WISP Trade Organization , [EMAIL PROTECTED] Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware They have them in stock now. I remember there was some talk about these a while ago. $50 min order so I just got 400 or so of the self adhesive PCB supports. I got the 5/8 standoff (should be able to fit the cards under the board too) I don't need 400, so if anyone wants a few, let me know. Otherwise, just letting ya'll know they are in stock. www.microplastics.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ <>-- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I'll take some... Catch me offlist. Mark -Original Message- From: Brian Rohrbacher <[EMAIL PROTECTED]> Date: Fri, 25 Aug 2006 11:21:57 To:Conversations over a new WISP Trade Organization , [EMAIL PROTECTED] Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware They have them in stock now. I remember there was some talk about these a while ago. $50 min order so I just got 400 or so of the self adhesive PCB supports. I got the 5/8 standoff (should be able to fit the cards under the board too) I don't need 400, so if anyone wants a few, let me know. Otherwise, just letting ya'll know they are in stock. www.microplastics.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Brian, I can take some ... shoot me offlist Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: Friday, August 25, 2006 11:22 AM To: Conversations over a new WISP Trade Organization; [EMAIL PROTECTED] Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbha rdware They have them in stock now. I remember there was some talk about these a while ago. $50 min order so I just got 400 or so of the self adhesive PCB supports. I got the 5/8 standoff (should be able to fit the cards under the board too) I don't need 400, so if anyone wants a few, let me know. Otherwise, just letting ya'll know they are in stock. www.microplastics.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/