I run that wire around to the mounting bracket.  Gets it all connected to tower.  Then, if tower is not grounded, bond it to known good ground.

Scott Reed
Owner
NewWays
Wireless Networking
Network Design, Installation and Administration
www.nwwnet.net


---------- Original Message -----------
From: "Harold Bledsoe" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Sat, 26 Aug 2006 15:38:03 -0400
Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik

> Perfect! :-)
>
> -Hal
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of Brian Rohrbacher
> Sent: Friday, August 25, 2006 9:17 PM
> To: WISPA General List
> Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
>
> I take a self tapper and run it out the bottom of my metal box, attach a
>
> #12 piggy tail, and attach the other end through a hole on the board.  
> Kind of like the attached pic.  Should work, eh?
>
> Brian
>
> Harold Bledsoe wrote:
>
> >One word to the wise on these:  many PCBs are grounded through the
> screw holes.  If you are using plastic standoffs, you may want to
> consider grounding the board some other way...
> >
> >-Hal
> >
> >--------------------------------------
> >Harold Bledsoe
> >Deliberant Wireless
> >http://www.deliberant.com
> >
> >________________________________
> >
> >From: [EMAIL PROTECTED] on behalf of Mark Nash
> >Sent: Fri 8/25/2006 1:04 PM
> >To: WISPA General List
> >Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
> >
> >
> >
> >I'll take some... Catch me offlist.
> >
> >Mark
> >-----Original Message-----
> >From: Brian Rohrbacher <[EMAIL PROTECTED]>
> >Date: Fri, 25 Aug 2006 11:21:57
> >To:Conversations over a new WISP Trade Organization
> <wireless@wispa.org>,       [EMAIL PROTECTED]
> >Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
> >
> >https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam
> =cbhardware
> >
> >They have them in stock now.  I remember there was some talk about
> these
> >a while ago.
> >$50 min order so I just got 400 or so of the self adhesive PCB
> supports.
> >I got the 5/8 standoff (should be able to fit the cards under the board
> too)
> >
> >I don't need 400, so if anyone wants a few, let me know.
> >
> >Otherwise, just letting ya'll know they are in stock.
> >
> >www.microplastics.com
> >--
> >WISPA Wireless List: wireless@wispa.org
> >
> >Subscribe/Unsubscribe:
> >http://lists.wispa.org/mailman/listinfo/wireless
> >
> >Archives: http://lists.wispa.org/pipermail/wireless/
> >--
> >WISPA Wireless List: wireless@wispa.org
> >
> >Subscribe/Unsubscribe:
> >http://lists.wispa.org/mailman/listinfo/wireless
> >
> >Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
> >  
> >
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
------- End of Original Message -------
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to