Re: Emailing from 4d issues

[Peter Adam via 4D_Tech]

The key differences are in the x-Authentication-Results: header

The 4D generated email has the following section in this header:

spf=fail (st11p00mm-spfmilter008.mac.com 
<http://st11p00mm-spfmilter008.mac.com/>: domain of di...@print...au 
<mailto:di...@printsystems.com.au> does not designate 203.12.160.162 as 
permitted sender) 

the Outlook generated email has:

spf=pass (st11p00mm-spfmilter008.mac.com 
<http://st11p00mm-spfmilter008.mac.com/>: domain of di...@print...au 
<mailto:di...@printsystems.com.au> designates 104.47.117.77 as permitted sender)

The correction of this is apparently pretty straight forward

http://www.x-pose.org/2013/10/22/how-to-designate-an-ip-address-as-permitted-sender/
 
<http://www.x-pose.org/2013/10/22/how-to-designate-an-ip-address-as-permitted-sender/>

The 104.47.117.77 address is in Redmond and is a Microsoft server. What you get 
when you subscribe to the Office package .



> On 1 Mar 2017, at 12:20 pm, Chuck Miller via 4D_Tech <4d_tech@lists.4d.com> 
> wrote:
> 
> Why not look at all headers from a 4D mail that failed and one from outlook 
> that succeeds.
> 
> Additionally, I have found that authorization is yours not their problem
> 
> Regards
> 
> Chuck
> 
> Chuck Miller Voice: (617) 739-0306
> Informed Solutions, Inc. Fax: (617) 232-1064   
> mailto:cjmillerinformed-solutions.com 
> Brookline, MA 02446 USA Registered 4D Developer
>   Providers of 4D and Sybase connectivity
>  http://www.informed-solutions.com  
> 
> This message and any attached documents contain information which may be 
> confidential, subject to privilege or exempt from disclosure under applicable 
> law.  These materials are intended only for the use of the intended 
> recipient. If you are not the intended recipient of this transmission, you 
> are hereby notified that any distribution, disclosure, printing, copying, 
> storage, modification or the taking of any action in reliance upon this 
> transmission is strictly prohibited.  Delivery of this message to any person 
> other than the intended recipient shall not compromise or waive such 
> confidentiality, privilege or exemption from disclosure as to this 
> communication. 
> 
>> On Feb 28, 2017, at 8:16 PM, Peter Adam via 4D_Tech <4d_tech@lists.4d.com> 
>> wrote:
>> 
>> It appears that there is some content in the header generated by 4D internet 
>> commands which is missing and is expected by the receiving email server
> 
> **
> 4D Internet Users Group (4D iNUG)
> FAQ:  http://lists.4d.com/faqnug.html
> Archive:  http://lists.4d.com/archives.html
> Options: http://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

**
4D Internet Users Group (4D iNUG)
FAQ:  http://lists.4d.com/faqnug.html
Archive:  http://lists.4d.com/archives.html
Options: http://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Replacing FootRunner in v16

[Peter Adam via 4D_Tech]

Fir many years I have been running scripts for 4D write documents using 
Footrunner, then nifty plugin from Footprints.

Now with v16 I no longer have this tool available.

There is a comment on the Footprints web site about looking for a capability in 
v16 that replaces Footrunner.

I am going blind, so I must =have missed the way to do this.

Can anyone point me in the right direction?




Cheers

Peter Adam
Adam, Zievert & Associates Pty Ltd
Melbourne Australia
Skype Phone: +61 3 9016 379
p: +61 3 9836 3539
f: +61 3 9836 9730
m: 0419 552 462
e: peter.a...@me.com 
w: www.adamzievert.com.au 
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Compatibility with Widows 10 v1809

[Peter Adam via 4D_Tech]

I have reports of compatibility issues with windows 10 v1809. It appears that 
4D is attempting to write an IP address to the CSC folder, one of windows 
system folders.

This is when launching the 4D v13 client.

v13 running on a Windows 10 v1709 client works fine.

Any suggestions about what to try?


Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Compatibility with Widows 10 v1809

[Peter Adam via 4D_Tech]

After extensive trouble shooting, all security functions turned off, a v17R4 
server will not launch. No screen is displayed nor is any background MIDI 
screen showing.

This is happening on a win 10 Pro v1809 box.

Is anyone using this version of Win 10 with 4D v17R4?



Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



> On 18 May 2019, at 1:52 pm, Peter Adam via 4D_Tech <4d_tech@lists.4d.com> 
> wrote:
> 
> V17R4 won’t launch either. prntvpt.dll missing and a bunch of other stuff. 
> 
> Any help?
> 
> 
> Cheers,
> 
> Peter Adam
> Adam, Zievert & Associates P/L
> 
> e: peter.a...@me.com <mailto:peter.a...@me.com>
> Skype Phone: +61 3 9016 379
> t:  +61 3 9836 3539
> m: 0419 552 462
> www.adamzievert.com.au <http://www.adamzievert.com.au/>
> 
> 
> 
>> On 17 May 2019, at 9:06 am, Peter Adam via 4D_Tech <4d_tech@lists.4d.com 
>> <mailto:4d_tech@lists.4d.com>> wrote:
>> 
>> I have reports of compatibility issues with windows 10 v1809. It appears 
>> that 4D is attempting to write an IP address to the CSC folder, one of 
>> windows system folders.
>> 
>> This is when launching the 4D v13 client.
>> 
>> v13 running on a Windows 10 v1709 client works fine.
>> 
>> Any suggestions about what to try?
>> 
>> 
>> Cheers,
>> 
>> Peter Adam
>> Adam, Zievert & Associates P/L
>> 
>> e: peter.a...@me.com
>> Skype Phone: +61 3 9016 379
>> t:  +61 3 9836 3539
>> m: 0419 552 462
>> www.adamzievert.com.au
>> 
>> 
>> 
>> **
>> 4D Internet Users Group (4D iNUG)
>> Archive:  http://lists.4d.com/archives.html 
>> <http://lists.4d.com/archives.html>
>> Options: https://lists.4d.com/mailman/options/4d_tech 
>> <https://lists.4d.com/mailman/options/4d_tech>
>> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com 
>> <mailto:4d_tech-unsubscr...@lists.4d.com>
>> **
> 
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html 
> <http://lists.4d.com/archives.html>
> Options: https://lists.4d.com/mailman/options/4d_tech 
> <https://lists.4d.com/mailman/options/4d_tech>
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com 
> <mailto:4d_tech-unsubscr...@lists.4d.com>
> **

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Compatibility with Widows 10 v1809

[Peter Adam via 4D_Tech]

V17R4 won’t launch either. prntvpt.dll missing and a bunch of other stuff. 

Any help?


Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



> On 17 May 2019, at 9:06 am, Peter Adam via 4D_Tech <4d_tech@lists.4d.com> 
> wrote:
> 
> I have reports of compatibility issues with windows 10 v1809. It appears that 
> 4D is attempting to write an IP address to the CSC folder, one of windows 
> system folders.
> 
> This is when launching the 4D v13 client.
> 
> v13 running on a Windows 10 v1709 client works fine.
> 
> Any suggestions about what to try?
> 
> 
> Cheers,
> 
> Peter Adam
> Adam, Zievert & Associates P/L
> 
> e: peter.a...@me.com
> Skype Phone: +61 3 9016 379
> t:  +61 3 9836 3539
> m: 0419 552 462
> www.adamzievert.com.au
> 
> 
> 
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Compatibility with Widows 10 v1809

[Peter Adam via 4D_Tech]

Thanks,

I have not had any problems with other versions of Win 10 so this location is a 
complete mystery. I was working with a really good Windows Tech support guy at 
the location and he could find nothing to explain the failure to launch.


Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



> On 21 May 2019, at 3:19 am, Randy Engle <4d.l...@xc2.us> wrote:
> 
> Peter
> 
> I just opened my app with 17r4, both 64 and 32 bit
> 
> Using Windows 10 Pro v 1809
> 
> No problemo
> 
> Randy Engle
> XC2 Software - XC2LIVE! - SwiftComply
> 
> -Original Message-
> From: 4D_Tech <4d_tech-boun...@lists.4d.com 
> <mailto:4d_tech-boun...@lists.4d.com>> On Behalf Of Peter Adam via 4D_Tech
> Sent: Sunday, May 19, 2019 5:39 AM
> To: 4D iNug Technical <4d_tech@lists.4d.com <mailto:4d_tech@lists.4d.com>>
> Cc: Peter Adam mailto:peter.a...@me.com>>
> Subject: Re: Compatibility with Widows 10 v1809 
> 
> After extensive trouble shooting, all security functions turned off, a v17R4 
> server will not launch. No screen is displayed nor is any background MIDI 
> screen showing.
> 
> This is happening on a win 10 Pro v1809 box.
> 
> Is anyone using this version of Win 10 with 4D v17R4?
> 
> 
> 
> Cheers,
> 
> Peter Adam
> Adam, Zievert & Associates P/L
> 
> e: peter.a...@me.com
> Skype Phone: +61 3 9016 379
> t:  +61 3 9836 3539
> m: 0419 552 462
> www.adamzievert.com.au
> 
> 
> 
>> On 18 May 2019, at 1:52 pm, Peter Adam via 4D_Tech <4d_tech@lists.4d.com> 
>> wrote:
>> 
>> V17R4 won’t launch either. prntvpt.dll missing and a bunch of other stuff. 
>> 
>> Any help?
>> 
>> 
>> Cheers,
>> 
>> Peter Adam
>> Adam, Zievert & Associates P/L
>> 
>> e: peter.a...@me.com <mailto:peter.a...@me.com> <mailto:peter.a...@me.com 
>> <mailto:peter.a...@me.com>> Skype Phone: +61 3 
>> 9016 379
>> t:  +61 3 9836 3539
>> m: 0419 552 462
>> www.adamzievert.com.au <http://www.adamzievert.com.au/> 
>> <http://www.adamzievert.com.au/ <http://www.adamzievert.com.au/>>
>> 
>> 
>> 
>>> On 17 May 2019, at 9:06 am, Peter Adam via 4D_Tech <4d_tech@lists.4d.com 
>>> <mailto:4d_tech@lists.4d.com> <mailto:4d_tech@lists.4d.com 
>>> <mailto:4d_tech@lists.4d.com>>> wrote:
>>> 
>>> I have reports of compatibility issues with windows 10 v1809. It appears 
>>> that 4D is attempting to write an IP address to the CSC folder, one of 
>>> windows system folders.
>>> 
>>> This is when launching the 4D v13 client.
>>> 
>>> v13 running on a Windows 10 v1709 client works fine.
>>> 
>>> Any suggestions about what to try?
>>> 
>>> 
>>> Cheers,
>>> 
>>> Peter Adam
>>> Adam, Zievert & Associates P/L
>>> 
>>> e: peter.a...@me.com <mailto:peter.a...@me.com>
>>> Skype Phone: +61 3 9016 379
>>> t:  +61 3 9836 3539
>>> m: 0419 552 462
>>> www.adamzievert.com.au <http://www.adamzievert.com.au/>
>>> 
>>> 
>>> 
>>> *
>>> *
>>> 4D Internet Users Group (4D iNUG)
>>> Archive:  http://lists.4d.com/archives.html 
>>> <http://lists.4d.com/archives.html> 
>>> <http://lists.4d.com/archives.html <http://lists.4d.com/archives.html>>
>>> Options: https://lists.4d.com/mailman/options/4d_tech 
>>> <https://lists.4d.com/mailman/options/4d_tech> 
>>> <https://lists.4d.com/mailman/options/4d_tech 
>>> <https://lists.4d.com/mailman/options/4d_tech>>
>>> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com 
>>> <mailto:4d_tech-unsubscr...@lists.4d.com> 
>>> <mailto:4d_tech-unsubscr...@lists.4d.com 
>>> <mailto:4d_tech-unsubscr...@lists.4d.com>>
>>> *
>>> *
>> 
>> **
>> 4D Internet Users Group (4D iNUG)
>> Archive:  http://lists.4d.com/archives.html 
>> <http://lists.4d.com/archives.html> 
>> <http://lists.4d.com/archives.html <http://lists.4d.com/archives.html>>
>> Options: https://lists.4d.com/mailman/options/4d_tech 
>> <https://lists.4d.com/mailman/options/4d_tech> 
>> <https://lists.4d.com/mailman/options/4d_tech 
>> <https://lists.4d.com/mailman/options/4d_tech>>
>> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com 
>> <mailto:4d_tech-unsubscr...@lists.4d.com> 
>> <mailto:4d_tech-unsubscr...@lists.4d.com>
>> **
> 
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Compatibility with Widows 10 v1809

[Peter Adam via 4D_Tech]

Randy,

The event viewer was not nearly as interesting as a tool called Procmon.exe

This is a process monitor that provides a lot of information about what is 
going on. Much more detailed than the event viewer.

See the Wikipedia entry. I called it up using Procmon.exe.

Also see below
>> On 21 May 2019, at 10:25 am, Randy Engle <4d.l...@xc2.us> wrote:
>> 
>> Peter
>>  
>> Sounds like you’ve got a good support tech.
>>  
>> Just out of curiosity, what does the Event Viewer have to report?
>> Does 4D start and then immediately stop?
> 
That’s exactly what happens. Grey screen opens then disappears.
> 
>> Does it start at all?
>> Won’t give you any answers, but might give you a clue or two.
>>  
>> Are you working with the latest build of 17r4?
> 
As far as I know
>>  
>> Are you starting 4D Server as an Administrator?
> 
Yes
> 
>>  
>> I don’t know specifics, but Windows 1809 has some snazzy (sic) new security 
>> features.
>> Check out:  Windows Security
> 
This probably a factor, however I have had a couple of responses , such as 
yours, that indicated no unusual problems running under 1809.

I understand that the customer was subject to a ransomware attack and bought 
the new hardware following the attack for security. But no amount of fiddling 
with the settings, including turning them all off achieved a launch.
> 
> 
>>  
>>  
>> Randy Engle
>> XC2 Software - XC2LIVE! - SwiftComply

Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



>  

> From: Peter Adam mailto:peter.a...@me.com>> 
> Sent: Monday, May 20, 2019 4:35 PM
> To: Randy Engle <4d.l...@xc2.us <mailto:4d.l...@xc2.us>>
> Cc: 4D iNug Technical <4d_tech@lists.4d.com <mailto:4d_tech@lists.4d.com>>
> Subject: Re: Compatibility with Widows 10 v1809 
>  
> Thanks,
>  
> I have not had any problems with other versions of Win 10 so this location is 
> a complete mystery. I was working with a really good Windows Tech support guy 
> at the location and he could find nothing to explain the failure to launch.
>  
>  
> Cheers,
>  
> Peter Adam
> Adam, Zievert & Associates P/L
>  
> e: peter.a...@me.com <mailto:peter.a...@me.com>
> Skype Phone: +61 3 9016 379
> t:  +61 3 9836 3539
> m: 0419 552 462
> www.adamzievert.com.au <http://www.adamzievert.com.au/>
> 
> 
>  
>> On 21 May 2019, at 3:19 am, Randy Engle <4d.l...@xc2.us 
>> <mailto:4d.l...@xc2.us>> wrote:
>>  
>> Peter
>> 
>> I just opened my app with 17r4, both 64 and 32 bit
>> 
>> Using Windows 10 Pro v 1809
>> 
>> No problemo
>> 
>> Randy Engle
>> XC2 Software - XC2LIVE! - SwiftComply
>> 
>> -Original Message-
>> From: 4D_Tech <4d_tech-boun...@lists.4d.com 
>> <mailto:4d_tech-boun...@lists.4d.com>> On Behalf Of Peter Adam via 4D_Tech
>> Sent: Sunday, May 19, 2019 5:39 AM
>> To: 4D iNug Technical <4d_tech@lists.4d.com <mailto:4d_tech@lists.4d.com>>
>> Cc: Peter Adam mailto:peter.a...@me.com>>
>> Subject: Re: Compatibility with Widows 10 v1809 
>> 
>> After extensive trouble shooting, all security functions turned off, a v17R4 
>> server will not launch. No screen is displayed nor is any background MIDI 
>> screen showing.
>> 
>> This is happening on a win 10 Pro v1809 box.
>> 
>> Is anyone using this version of Win 10 with 4D v17R4?
>> 
>> 
>> 
>> Cheers,
>> 
>> Peter Adam
>> Adam, Zievert & Associates P/L
>> 
>> e: peter.a...@me.com <mailto:peter.a...@me.com>
>> Skype Phone: +61 3 9016 379
>> t:  +61 3 9836 3539
>> m: 0419 552 462
>> www.adamzievert.com.au <http://www.adamzievert.com.au/>
>> 
>> 
>> 
>> 
>>> On 18 May 2019, at 1:52 pm, Peter Adam via 4D_Tech <4d_tech@lists.4d.com 
>>> <mailto:4d_tech@lists.4d.com>> wrote:
>>> 
>>> V17R4 won’t launch either. prntvpt.dll missing and a bunch of other stuff. 
>>> 
>>> Any help?
>>> 
>>> 
>>> Cheers,
>>> 
>>> Peter Adam
>>> Adam, Zievert & Associates P/L
>>> 
>>> e: peter.a...@me.com <mailto:peter.a...@me.com> <mailto:peter.a...@me.com 
>>> <mailto:peter.a...@me.com>> Skype Phone: +61 3 
>>> 9016 379
>>> t:  +61 3 9836 3539
>>> m: 0419 552 462
>>> www.adamzievert.com.au <http://www.adamzievert.com.au/> 
>&g

Running AppleScripts from 4D under Catalina

[Peter Adam via 4D_Tech]

I have an app where when the user wants to send an email from 4D, the program 
builds an AppleScript to communicate with either Mail or Outlook.

This has been working fin from v17R6 under Mojave but returns a message that it 
can’t find Mail on Catalina.

I have code signed and notarised the app, set the entitlements to include 
Automation in the build and code signing but when I install and run the app on 
Catalina the emailing still fails with the same error. Mail is definitely 
installed.

The Privacy preference does not show the application in the  Automation window 
as it does under Mojave.

This is all with 4D v17R6

Any ideas?




Cheers

Peter Adam
Adam, Zievert & Associates Pty Ltd
Melbourne Australia
Skype Phone: +61 3 9016 379
p: +61 3 9836 3539
f: +61 3 9836 9730
m: 0419 552 462
e: peter.a...@me.com
w: www.adamzievert.com.au

**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Any Success Running 4D v13.6 on Win 10 Pro?

[Peter Adam via 4D_Tech]

Because of the permissions issues that seem to be a permanent feature of Win 10 
I install our built servers in the Public folder and have no permissions 
issues. Been doing this with 4D v13 for years.


Cheers,

Peter Adam
PrintPoint ANZ
e: peter.a...@me.com 
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
w: www.printpoint.net.au 

'The fully-integrated management software to streamline your business'

 Please consider the environment before printing this email

> On 20 Jan 2021, at 3:05 am, Randy Jaynes via 4D_Tech <4d_tech@lists.4d.com 
> > wrote:
> 
> Depending on where you have the built application installed, Windows may be 
> moving the app into a ‘protected folder’ as the application is starting up, 
> effectively pulling the carpet out from under your application.
> 
> I would suspect something like this if it’s in one of the Program Files 
> folders.
> 
> Randy
> 
> --
> Randy Jaynes
> Senior Programmer and Customer Support
> 
> http://printpoint.com  • 845.687.3741 • PrintPoint, 
> Inc • 57 Ludlow Lane • Palisades, NY 10964 
> 
> 
> 
> 
> Please send all emails to supp...@printpoint.com 
> 
> 
> 
> 
> 
>> On Jan 19, 2021, at 10:47 AM, Ken Eyring via 4D_Tech <4d_tech@lists.4d.com 
>> > wrote:
>> 
>> I'm trying to help out a user of a 4D v13.6 Built Server.  They upgraded 
>> from Win 7 to Win 10 Pro without asking - and the built server will not run.
>> 
>> Ken Geiger said he believed 4D v13 and Win 10 Pro were not compatible. 
>> Thanks Ken!
>> 
>> Before I tell the end user that they need to either upgrade their 4D 
>> application or revert back to Win 7... Has anyone had success running v13.6 
>> on Win 10 Pro?
> 
> **
> 4D Internet Users Group (4D iNUG)
> New Forum: https://discuss.4D.com 
> Archive:  http://lists.4d.com/archives.html 
> 
> Options: https://lists.4d.com/mailman/options/4d_tech 
> 
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com 
> 
> **

**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Importing PDFs into 4D Win v17R6 - v18 and converting

[Peter Adam via 4D_Tech]

I am trying to import PDFs into 4D win and then upload them as png files to a 
web site.

This works seamlessly on a Mac but my client uses Win 10.

I am able to load the pdf into a BLOB but when I do BLOB to Picture as a PDF, 
the 4D picture variable displays as the Camera with a cross through it and .pdf 
at the bottom of the image area.

I am using 4D v17R6 on a Win 10 OS I have Quicktime installed but I am nort 
sure if that has any part two play.

Ideally I would like to convert the pdf to a png in Windows, It works for me on 
the Mac

Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

SuperReport printer choice not respected by Windows 10

[Peter Adam via 4D_Tech]

I am finding that the choice of printer that I specify in my superReports is 
not being respected by Windows 10. Instead the “Default” printer is being used.

I am looking for a way around this.

I am using 4D v17R6 and SuperReports 4.2.1




Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: SuperReport printer choice not respected by Windows 10

[Peter Adam via 4D_Tech]

Thanks Spencer but that is an obsolete command to be removed. There does not 
seem to be any thing in v4
Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com 
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au 


> On 9 Jun 2021, at 10:07 pm, Spencer Hinsdale via 4D_Tech 
> <4d_tech@lists.4d.com > wrote:
> 
> https://doc.4d.com/4Dv18/4D/18.4/SET-CURRENT-PRINTER.301-5233936.en.html 
> 
**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: SuperReport printer choice not respected by Windows 10

[Peter Adam via 4D_Tech]

Thanks Spencer but that is an obsolete command to be removed. There does not 
seem to be any thing in v4
Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com 
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au 


> On 9 Jun 2021, at 10:07 pm, Spencer Hinsdale via 4D_Tech 
> <4d_tech@lists.4d.com > wrote:
> 
> https://doc.4d.com/4Dv18/4D/18.4/SET-CURRENT-PRINTER.301-5233936.en.html 
> 
**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Compiled Structure does not Match Data

[Peter Adam via 4D_Tech]

I apolitically;ogise for asking a question related to v13 but my client has 
been tardy in accepting an upgrade.

However before making the move I have had to make some changes to the v13 DB 
and something that has been modified without issue for many years  now is 
failing when I compile and merge it.

I compile and merge the structure with its datafile, no problems reported.

I then launch the compiled server point it at the datafile that has just been 
used in the compiling process and i get the message
The structure and data files do not correspond to each other. The data file 
cannot be opened with this structure.


When I click the close button on the dialog, I then get an error dialog, Cannot 
delete record in table Resources of Database…

and the details list a lot of Cannot save record… and the key line seems to be 
Wrong header.

All this is happening on Windows 10.

Suggestions?




Cheers,

Peter Adam
Adam, Zievert & Associates P/L

e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t:  +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au



**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**