Pat
I have sent a couple of emails which are unanswered too over the last week, so
don't take it personally. They have been so good in the past looking after me
that I can only imagine that everyone is away due to some unexpected crisis. I
hope you get sorted soon.
Steve
On 20/07/2018, 15:22
The original very large box of paper manuals with my first version of 4D
(likely v3), having moved up first from Filemaker and then 4D light/first? was
the way I got to grips with 4D.
The quality of the documentation for new adopters and so the continuation of
the platform should not be under-e
Re: VPN - I’m thinking of purchasing a device
I would heartly recommend a hardware device for VPN, the reliability and
throughput, as well as added security features (e.g. web filtering) are a
definitive improvement over server. With a UPS for supply backup they just sit
there backup once s
Some ideas:
I would question the desirability of an excel file for these data, getting the
data back out of excel will be more than a little fun.
A text file with the LFs replaced with some unique code would be better for
most purposes. Alternatively, you could pick some high ascii codes as your
The worst of it is that trying to log in in the application crashes 4D with a
dialog stating 'You can identify yourself ..." which will not dismiss
Steve
UK
--
On 07/08/2018, 11:26, "4D_Tech on behalf of Pat Bensky via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com>
Is TRIM enabled?
If not that would be my first step.
Steve
UKVD
On 08/08/2018, 16:54, "4D_Tech on behalf of Dave Nasralla via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
Hey All,
This isn't related to 4D per se, but our 4D server is running a
Allan
Somewhere around v16r4–6 there was a change in the maximum file name length and
path length that caused us considerable problems (we are Mac based and had been
sending reports with enormous descriptive titles before this generated on the
fly using 4D write and then attached to emails via
Mike
I would change the path to Mac format - our code works with that as Jeffery
mentioned
Also, the file name and path length need to be short to work - there seemed to
be a change a few versions back and we had to change our code to meet this
requirement
We also always send the content type p
What size was the file originally? Are there any BLOBS or Images in the data?
It does seem odd.
A couple of ideas
I presume the records have been deleted and not marked as deleted
Have you tried experimenting with the settings in the advanced TAB (I can't
remember if this is available in v13)
Hi everyone, I hope someone can help– I suspect I am being daft.
I am starting to design some labels in 4D and there is by default a large
header and footer meaning there is very limited space for the body text. I can
remove the header and footer, but do not see how to increase the size of the
In the 32bit version of v17 you can use both old 4Dwrite (with v17 versions)
and Write Pro as long as you have the plug ins installed. However, the 32-bit
version is pretty painful speed wise with the new interface unless you use the
64bit app - but it is fine for development.
We are currently
http://download.4d.com/Products/Current/4D_v17/Installers/4D_v17.0_Mac_32-bit.dmg
HTH
Steve
On 15/12/2018, 21:15, "4D_Tech on behalf of Mitchell Shiller via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
Steve,
That was my original question. Wher
Is it that you have two separate licences - should you not just have the
partner licence for both or the developer licence for both?
Having said that my licence was incorrectly updated at maintenance renewal
recently and fixed very quickly by 4D in France.
Steve
On 25/02/2019, 16:07, "4D_Te
RE: There is another plugin from pluggers.nl which handles viewing and
printing of pdf documents too: PDFViewer. I have been using it on macOS for
years. Excellent support from Rob for the rare occasions I needed it.
I would second this!
Steve
I would just check that there has not been a change of user access to this
plug-in in user and groups - this has caught us out a few times between R
upgrades as the settings for this seem to be lost
Steve
On 20/05/2019, 23:06, "4D_Tech on behalf of Timothy Penner via 4D_Tech"
<4d_tech-boun...
Dear all
Anyone having difficulties with Mac PDF Viewer plugin (2.01) with Mojave and
v17 (r4 and r5) 64 bit. Can’t decide whether I have a bad form or there is a
more systemic problem.
Thanks
Steve
UKVD
**
4D Internet Users Grou
.
> On Jul 22, 2019, at 3:48 PM, UKVetDerm via 4D_Tech <4d_tech@lists.4d.com>
wrote:
>
> Dear all
> Anyone having difficulties with Mac PDF Viewer plugin (2.01) with Mojave
and v17 (r4 and r5) 64 bit. Can’t decide whether I have a bad form or there is
a m
or web areas (on mac).
Rob might be on holiday right now, but normally he responds pretty quickly.
HTH
Koen
> Op 22 jul. 2019, om 21:48 heeft UKVetDerm via 4D_Tech
<4d_tech@lists.4d.com> het volgende geschreven:
>
> Anyone having difficulties with Mac
On the Mac at least, it loads all of the printers set up on the machine, they
don't need to be attached/available, so unless you are setting a printer up
mid-session I am not sure this is a necessary.
Steve
On 07/10/2019, 17:10, "4D_Tech on behalf of David Ringsmuth via 4D_Tech"
<4d_tech-boun
Dear 4D collective
I am unable to download the technote materials https://kb.4d.com/assetid=78151
I have tried the usual range of browsers, have logged in and am feeling a bit
defeated. Any tips?
Thanks
Steve Shaw
UKVD
**
4D In
Thanks Chip and Narinder
There seems to be a problem which is not obvious to me!
I'll try again in the week and have a look at our security device in some
detail!
Steve
On 09/11/2019, 15:25, "Chip Scheide" <4d_o...@pghrepository.org> wrote:
I tried...
get an error - no access
at/on
I have installed 4D 17 r6 as a client on a new machine this morning, but cannot
get around the following error
Failed to synchronize Resources Folder
Any previous experience from the experts here gratefully received. I note an
old list entry (2018) did not give a definitive answer.
Thanks in a
erver down for a short while
without too much impact.
Steve
On 14/12/2019, 10:33, "4D_Tech on behalf of UKVetDerm via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
I have installed 4D 17 r6 as a client on a new machine this morning,
Hi ORDA users
I am starting to explore ORDA and with many false steps I have reduced some
code to just a few lines which is great. However, I am struggling to extract a
field from a related one table when working principally in the many table.
In the following selection – I cannot find the cod
enamed fields or relations.
Jim Crate
On Jan 28, 2020, at 4:25 AM, UKVetDerm via 4D_Tech <4d_tech@lists.4d.com>
wrote:
>
> Hi ORDA users
>
> I am starting to explore ORDA and with many false steps I have reduced
some code to just a few l
For the 4D write side of things I would use v17 r 4 (I think) 32 bit to
facilitate using the two systems side by side in a fairly modern environment.
Not everything available in WP (v18) was sorted at that stage so I would make
this an interim step as v18 seems fairly complete.
Hope this help
S
Bob
Even in Microsoft Outlook it is common for sent emails to only be seen on the
machine (phone, PC, Web, Tablet) that sends them, which is sometimes a real
nuisance. The only way I have found to avoid this situation is to BCC or CC the
emails to the origination. Is this a feature of Exchange
Is there any possibility that the new MAIL commands in version 18 will sort out
these shortcomings?
On 18/03/2020, 21:53, "4D_Tech on behalf of Herr Alexander Heintz via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
Am 18.03.2020 um 22:43 schrieb David R
Hi 4D experts
The following code has been working really well, much faster than the old IC
methods, but from today the PDFs are arriving corrupted if sent from a MAC
client, but not from a PC client. We have not used PC clients before, but
because of bandwidth issues I have just set one up as a
;4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
It looks like several attachment related bugs have been fixed after 17r6.
https://bugs.4d.fr/fixedbugslist?branch=18_R2
John DeSoi, Ph.D.
> On Apr 3, 2020, at 6:32 AM, UKVetDerm via 4D_
Original Environment:
-
Program creating the PDF: 4D
OS creating the PDF: macOS
Printer driver used: macOS built in ( we can still produce PDFs using the
code to put the PDF into the temporary folder for sending)
OS 4D is running on that s
Thanks Tim this is the situation. Very little has changed
Original Environment:
-
Program creating the PDF: 4D
OS creating the PDF: macOS
Printer driver used: macOS built in ( we can still produce PDFs using
the code t
The files won't open on Mac OS or Windows and the applications tried include
Preview, PDF Expert and Adobe Acrobat
The header information looks good to me
%!PS-Adobe-3.0
%APL_DSC_Encoding: UTF8
%APLProducer: (Version 10.14.6 (Build 18G4032) Quartz PS Context)
Thanks
Steve
On 03/04/2020, 18:1
this is a version difference.
Kind regards and thank you for all the suggestions
Steve
On 03/04/2020, 18:25, "4D_Tech on behalf of UKVetDerm via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
The files won't open on Mac OS or Windows
ile.platformPath)
Else
SET PRINT OPTION(Destination option;3;$file.platformPath)
End if
2 on windows, 3 on mac.
> 2020/04/04 6:45、UKVetDerm via 4D_Tech <4d_tech@lists.4d.com>のメール:
>
> SET PRINT OPTION(Destination option;2;$longDocName)
&g
Thank you. I have learnt my mistake - see previous post. I should have checked
a good file for comparison. Far too much going on at present with the current
crisis. Steve
On 04/04/2020, 10:01, "4D_Tech on behalf of Ingo Wolf via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists
Datacheck - that takes me back. Do we have a much better 4D now I wonder? I
have not (touching a very big piece of wood) had a Datacheck moment for a long
time, although cheap storage makes very regular backups much easier. Sorry to
hijack your post! Steve
On 07/04/2020, 20:11, "4D_Tech on beh
Hi Hilsen
This works fine for us, we never preview (16 and currently 17r6, 18 and 18r2)
$longDocName:=$pathname+$docname
SET PRINT OPTION(Orientation option;1)
SET PRINT OPTION(Destination option;3;$longDocName)
http://www.pluggers.nl/product/pdf-viewer/ has served us well for a long time.
Steve
On 21/04/2020, 06:12, "4D_Tech on behalf of Chris Belanger via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
Is there a way in 4D to display PDF documents? Either nativel
There is a feature request here
https://discuss.4d.com/t/import-docx-in-write-pro/14014/2
You may want to join the discussion on the new forums. It would be a very
useful feature, but much more difficult I suspect than export to that format.
Steve
On 04/06/2020, 08:09, "4D_Tech on behalf of n
I would recommend moving over to the forums, this list is in its last days.
https://discuss.4d.com
Steve
On 16/06/2020, 08:17, "4D_Tech on behalf of nisshaa2004 via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
Hi All,
I am in the process of convert
41 matches
Mail list logo
