Message-
From: AF On Behalf Of Nate Burke
Sent: Friday, March 29, 2024 9:32 AM
To: AnimalFarm Microwave Users Group
Subject: [AFMUG] EPMP 3000 Vs 4500
I was wondering if anyone has some real world results from changing
EPMP3000 to EPMP 4500. I'm starting to get equipment for our site builds
I was wondering if anyone has some real world results from changing
EPMP3000 to EPMP 4500. I'm starting to get equipment for our site
builds this summer, and am looking at the price difference between 3000
vs 4500 trying to decide which route to go. I don't do high density
deployments, so
There was something that cause me to poke at it, but it was years ago. I
just remember the screen was odd to see
On Tue, Jan 2, 2024 at 1:21 PM Nate Burke wrote:
> Was yours acting up before the issue? This AP had been slowly loosing TX
> power for about 2 months.
> On 1/2/2024 12:38 PM,
Was yours acting up before the issue? This AP had been slowly loosing
TX power for about 2 months.
On 1/2/2024 12:38 PM, Steve Jones wrote:
I had this issue once. I dont recall an RMA. It probably ended up
deployed again close by in case of further issue then forgot about. I
do remember
I had this issue once. I dont recall an RMA. It probably ended up deployed
again close by in case of further issue then forgot about. I do remember
loading multiple firmwares in both banks multiple times to make sure
nothing collapsed
On Thu, Dec 21, 2023 at 4:55 PM Nate Burke wrote:
> I had an
I had an EPMP3000 AP on a tower that died after a web page initiated
reboot. I got it swapped out and when I put it on the bench, accessing
on 169.254.1.1 loaded a page saying to 'Load Firmware' With a big
disclaimer saying 'No Firmware validation done, make sure you load a
proper image'
I
Yeah, the 1000 (AP) was nice because it could do 22v-56v, with any polarity
or pinout, so it worked with just about any power supply you could throw at
it.
The 2000 is 48v only, the 3000 is 48v only and the 3000L is 24v only. The
only ePMP radios that cared about POE polarity were the 1000 SMs
Well that means epmp 3000 and 3000L both do both polarities. That's good.
Unfortunately, it's 48v and 24v respectively.
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Oct 5, 2020 at 2:40 PM Adam Moffett wrote:
> The spec sheet
The spec sheet for ePMP 3000 actually says 56V 802.3at
The spec sheet for the ePMP 3000L says "29V Cambium PoE"
The spec sheet for the ePMP 3000 Micro says "802.3af or 802.3at or 56VDC
Passive Injector"
So be careful what we mean by "ePMP 3000".
I would not be surprised if they accept
since I knew what the POE pinout was on
>>>> anything that I just don’t recall. 4,5 & 7,8 for original canopy. 4,5
>>>> negative I think. But I would expect the 3000 to perhaps use all 8 wires
>>>> for power?
>>>>
>>>> *From:* Josh L
iginal canopy. 4,5 negative I
think. But I would expect the 3000 to perhaps use all 8
wires for power?
*From:* Josh Luthman
*Sent:* Monday, October 5, 2020 10:46 AM
*To:* AnimalFarm Microwave Users Group
*Subjec
ng since I knew what the POE pinout was on
>>> anything that I just don’t recall. 4,5 & 7,8 for original canopy. 4,5
>>> negative I think. But I would expect the 3000 to perhaps use all 8 wires
>>> for power?
>>>
>>> *From:* Josh Luthman
>>>
’t recall. 4,5 & 7,8 for original canopy. 4,5
>>> negative I think. But I would expect the 3000 to perhaps use all 8 wires
>>> for power?
>>>
>>> *From:* Josh Luthman
>>> *Sent:* Monday, October 5, 2020 10:46 AM
>>> *To:* AnimalFarm Microw
>> negative I think. But I would expect the 3000 to perhaps use all 8 wires
>> for power?
>>
>> *From:* Josh Luthman
>> *Sent:* Monday, October 5, 2020 10:46 AM
>> *To:* AnimalFarm Microwave Users Group
>> *Subject:* Re: [AFMUG] epmp 3000 poe
>>
>> Tradit
I think. But I would expect the 3000 to perhaps use all 8 wires
> for power?
>
> *From:* Josh Luthman
> *Sent:* Monday, October 5, 2020 10:46 AM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] epmp 3000 poe
>
> Traditionally reverse.
>
> Radio accept
ires for power?
From: Josh Luthman
Sent: Monday, October 5, 2020 10:46 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] epmp 3000 poe
Traditionally reverse.
Radio accepts both.
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On
Traditionally reverse.
Radio accepts both.
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Oct 5, 2020 at 12:44 PM wrote:
> Anyone know the pair polarity for this radio?
> --
> AF mailing list
> AF@af.afmug.com
>
Anyone know the pair polarity for this radio?--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Well, the hood is actually a very good thing for the ePMP 1000, because
those tend to leak around the connectors if you don't tighten the nuts down
(they came way too loose from the factory). The ePMP 2000 comes with a hood
that you can use on it when it's pole mounted, but other than that, I've
No... just make sure you seal the connectors properly, and it'll be fine.
Sectors don't really *require* a hood either, it just makes our lives a bit
easier.
On Thu, Feb 20, 2020 at 9:40 AM Andy Trimmell
wrote:
> I’ve got a ePMP 3000L on a KP omni antenna and it doesn’t have a cover for
> it.
I've got a ePMP 3000L on a KP omni antenna and it doesn't have a cover
for it. Does it require the hood like on a sector antenna?
Andy Trimmell
Business Manager
PDS Connect
317-831-3000
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Is anyone using the SFP Port on the EPMP 3000? I have a site where I'm
having lots of problems with the Copper Ethernet. The Ethernet port
never bounces and will instantly negotiate any and all 1G, 100mb and
10mb data speeds, but I have a lot of packet loss getting to the AP.
Ethernet
Date for QoS for 3K to F300 ( and forward and backward) QoS not confirmed yet.
Adam
From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Joe Novak
Sent: Monday, May 20, 2019 3:55 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] ePMP 3000 backwards compatibility
It's reall
[mailto:af-boun...@af.afmug.com] *On Behalf Of *Joe Novak
>> *Sent:* Friday, May 17, 2019 1:15 PM
>> *To:* AnimalFarm Microwave Users Group
>> *Subject:* Re: [AFMUG] ePMP 3000 backwards compatibility
>>
>>
>>
>> It's been promoted to the current branch
t;
>
> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Joe Novak
> *Sent:* Friday, May 17, 2019 1:15 PM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] ePMP 3000 backwards compatibility
>
>
>
> It's been promoted to the current branch as &qu
Same.
From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Joe Novak
Sent: Monday, May 20, 2019 2:30 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] ePMP 3000 backwards compatibility
Not exactly clear on that but I'm really hoping that QOS firmware drops
really soon
AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Mathew Howard
> *Sent:* Monday, May 20, 2019 11:21 AM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] ePMP 3000 backwards compatibility
>
>
>
> Not if you're swapping to an ePMP 3000L... granted you're not going to
Are you saying Force 200 to a 2000AP both on latest firmware will lose QOS?
From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Mathew Howard
Sent: Monday, May 20, 2019 11:21 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] ePMP 3000 backwards compatibility
Not if you're
: [AFMUG] ePMP 3000 backwards compatibility
It's been promoted to the current branch as "ePMP System Release 4.3.2.1 /
15-May-19" - no longer in the beta branch.
ePMP-GPS_Synced-v4.3.2.1.tar.gz, ePMP-NonGPS_Synced-v4.3.2.1.tar.gz is the
firmware for the EPMP1000/2000 radios, that will
Thanks Steve
From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Steve Jones
Sent: Monday, May 20, 2019 2:02 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] ePMP 3000 backwards compatibility
the AP swap is an antenna swap too
On Fri, May 17, 2019 at 12:16 PM Joe Novak
duction firmware if that’s what
>>> you meant. I don’t see anywhere in production firmware that there’s a 4.x
>>> firmware for 1000/2000 models.
>>>
>>>
>>>
>>> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Darin Steffl
>>> *Se
/2000 models.
>>
>>
>>
>> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Darin Steffl
>> *Sent:* Friday, May 17, 2019 10:18 AM
>> *To:* AnimalFarm Microwave Users Group
>> *Subject:* Re: [AFMUG] ePMP 3000 backwards compatibility
>>
>&
n’t see anywhere in production firmware that there’s a 4.x
> firmware for 1000/2000 models.
>
>
>
> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Darin Steffl
> *Sent:* Friday, May 17, 2019 10:18 AM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] ePMP 3000 backwards compatibility
Stable release of this was a few weeks ago. Download the 2nd stable version
released 2 days ago and it will work.
Correct on being able to swap out a 1/2k AP for a 3k and all existing epmp
radios as well
Stable release of this was a few weeks ago. Download the 2nd stable version
released 2 days ago and it will work.
Correct on being able to swap out a 1/2k AP for a 3k and all existing epmp
radios as well as elevate sm's will connect. They need to be updated to
latest version first though or they
I haven't been following any of the 3000 Hype. Can you drop an EPMP3000
AP in place of an EPMP1000AP and not have to change any customer
radios? Do you get any benefits without the Force300 SM?
On 5/17/2019 8:49 AM, canopy--- via AF wrote:
It works now. Download the latest firmware.
On
It works now. Download the latest firmware.
On Fri, May 17, 2019 at 9:05 AM Andy Trimmell
wrote:
> So when is this coming? Anyone have any news on this?
>
>
>
> Andy Trimmell
>
> *Business Manager*
>
> *PDS Connect*
>
> 317-831-3000
>
>
> --
> AF mailing list
> AF@af.afmug.com
>
So when is this coming? Anyone have any news on this?
Andy Trimmell
Business Manager
PDS Connect
317-831-3000
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
38 matches
Mail list logo
