[AFMUG] PTP600 modes

Hi, I just installed a new PTP600 link (NLOS). There is a lot of noise in the area, but the link is performing very poorly. I remember once people talking about a way to put the radios into "engineering" mode so you could change the channels outside of the normal FCC range. I'd like to be

Re: [AFMUG] OT FBI Agent

No ar 15 for you now chuck On Jun 23, 2016 1:41 PM, "Chuck McCown" wrote: > Anyone know an FBI or CIA agent? Like to talk to one about a listening > device design I have. > Hate to call the main number and start trying to drill down in their > agency. >

Re: [AFMUG] Netgear Remote Admin Port

https://ip:8080 you need to add https:// Sent from my iPhone > On Jun 23, 2016, at 8:36 PM, Sterling Jacobson wrote: > > That is definitely not what this brand new out of the box netgear was set at. > > I didn’t write it down and it’s not responding to 8080, and I’m

Re: [AFMUG] Netgear Remote Admin Port

That is definitely not what this brand new out of the box netgear was set at. I didn’t write it down and it’s not responding to 8080, and I’m sure it was something totally different. I’ve set up a few myself recently and they all were NOT 8080. From: Af [mailto:af-boun...@afmug.com] On

Re: [AFMUG] Netgear Remote Admin Port

You can do a port scan on it. bp On 6/23/2016 5:22 PM, Sterling Jacobson wrote: So I'm pretty sure Netgear obfuscates their actual remote admin access port. Everything on the internet says its 8080, but I swear when I just configured one it defaulted to

Re: [AFMUG] Netgear Remote Admin Port

It's configurable when you enable remote management, but it defaults to 8080, you also have to select allow all ip ranges 255.255.255.255 On Thu, Jun 23, 2016 at 5:22 PM, Sterling Jacobson wrote: > So I'm pretty sure Netgear obfuscates their actual remote admin access >

[AFMUG] Netgear Remote Admin Port

So I'm pretty sure Netgear obfuscates their actual remote admin access port. Everything on the internet says its 8080, but I swear when I just configured one it defaulted to something like 8136 or something odd like that. Anyone else ever seen this? If so, what is the damn REAL default port

Re: [AFMUG] Interesting spec

I remember car batteries in Phoenix... On Thu, Jun 23, 2016 at 11:29 AM, Chuck McCown wrote: > Not sure if this is correct as it was stated in an ad for a battery > regenerator, but they claim that for every 8.4 deg C increase, a lead acid > battery's life is cut in half.

Re: [AFMUG] OT FBI Agent

No, I meant does Chuck want someone in the NSA. On Thu, Jun 23, 2016 at 6:37 PM, Paul Stewart wrote: > hehe… no, don’t know anyone currently that works there…. was on a course > several years back with a couple of guys from NSA though - was kind of > interesting, the room

Re: [AFMUG] OT FBI Agent

No, I meant does Chuck want someone from the NSA? hehe… no, don’t know anyone currently that works there…. was on a course several years back with a couple of guys from NSA though - was kind of interesting, the room was all military except for two guys from NSA and then there was myself …. lonely

Re: [AFMUG] OT FBI Agent

hehe… no, don’t know anyone currently that works there…. was on a course several years back with a couple of guys from NSA though - was kind of interesting, the room was all military except for two guys from NSA and then there was myself …. lonely “civilian” ;) > On Jun 23, 2016, at 6:10 PM,

Re: [AFMUG] 450m

What benefits does a “Limited” PMP 450M have over a regular PMP 450 AP? Chris Wright Network Administrator Velociter Wireless 209-838-1221 x115 From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup Sent: Wednesday, June 22, 2016 11:55 AM To: af@afmug.com Subject: Re: [AFMUG] 450m

Re: [AFMUG] CNUT older than 4.8

Is there a way you could get me 4.5.3 to install? Either email me the file offlist, or something like a Dropbox link? I’m not 100% sure which version I was using before 4.9, other than I had to first install 4.8. I need something that supports Canopy 12.1.x. From: Steve Utick Sent:

Re: [AFMUG] OT FBI Agent

How about NSA? On Jun 23, 2016 3:32 PM, "Paul Stewart" wrote: > Ironically I can say yes to both …. And I live in Canada ;) > > > > I’ve heard second hand, there’s a length process to get through their > “vendor approval” process to even get to the point of pitching an >

[AFMUG] Xconomy: Google Fiber Buys Webpass in Wireless Internet Land Grab

Xconomy: Google Fiber Buys Webpass in Wireless Internet Land Grab. http://google.com/newsstand/s/CBIwk5WQ2SU

Re: [AFMUG] OT FBI Agent

Ironically I can say yes to both .. And I live in Canada ;) I've heard second hand, there's a length process to get through their "vendor approval" process to even get to the point of pitching an idea/product/service etc. YMMV From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck

Re: [AFMUG] OT FBI Agent

Oh it was pretty standard. A "who had this IP at this time" kind of a thing. She seemed wicked nice. -- Original Message -- From: "Chuck McCown" To: af@afmug.com Sent: 6/23/2016 3:27:28 PM Subject: Re: [AFMUG] OT FBI Agent ouch From:Adam Moffett Sent: Thursday,

Re: [AFMUG] Semi-OT: Engine oil consumption

I googled and found the manuals for ours weeks before it was delivered. On 6/23/2016 2:23 PM, Adam Moffett wrote: RTFM, gee what's that? Actually I asked the dealer to email me a copy of the manual every day for 3 days and they couldn't get it to me before the genny arrived. So I skimmed the

Re: [AFMUG] OT FBI Agent

ouch From: Adam Moffett Sent: Thursday, June 23, 2016 1:23 PM To: af@afmug.com Subject: Re: [AFMUG] OT FBI Agent I have contact info for one who sent us a subpoena recently :) -- Original Message -- From: "Chuck McCown" To: af@afmug.com Sent: 6/23/2016 2:41:42 PM

Re: [AFMUG] OT FBI Agent

I have contact info for one who sent us a subpoena recently :) -- Original Message -- From: "Chuck McCown" To: af@afmug.com Sent: 6/23/2016 2:41:42 PM Subject: [AFMUG] OT FBI Agent Anyone know an FBI or CIA agent? Like to talk to one about a listening device design

Re: [AFMUG] Semi-OT: Engine oil consumption

RTFM, gee what's that? Actually I asked the dealer to email me a copy of the manual every day for 3 days and they couldn't get it to me before the genny arrived. So I skimmed the paper manual on the day of installation. Haven't gone back to thoroughly read it, but I remember reading that

Re: [AFMUG] 450m

Perhaps. But the 12.8° "sector" size can make up for a lot, depending on how isolated the beams are from one another. I'll withhold judgement until I see some results at 5-9 mile distances. bp On 6/23/2016 12:12 PM, Peter Kranz wrote: But the gain is all

Re: [AFMUG] 450m

But the gain is all wrong.. 14db.. suckage. Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com From: Af [mailto:af-boun...@afmug.com] On Behalf Of Bill Prince Sent: Wednesday, June

Re: [AFMUG] Semi-OT: Engine oil consumption

Did you RTFM? Our Generac QS (2.4L) came from the factory filled with 5w20 synthetic blend. You're supposed to change filter and oil to 5w30 syn blend after the first 30 hours. And then regular filter/oil changes w/ 5w30 every 100 hours. I believe the 2.4L Mitsubitchy is an iron block though.

Re: [AFMUG] OT FBI Agent

Got it, thanks. From: TJ Trout Sent: Thursday, June 23, 2016 12:51 PM To: af@afmug.com Subject: Re: [AFMUG] OT FBI Agent you got mail, offlist. On Thu, Jun 23, 2016 at 11:50 AM, Chuck McCown wrote: And there’s that... From: Josh Luthman Sent: Thursday, June 23,

Re: [AFMUG] OT FBI Agent

you got mail, offlist. On Thu, Jun 23, 2016 at 11:50 AM, Chuck McCown wrote: > And there’s that... > > *From:* Josh Luthman > *Sent:* Thursday, June 23, 2016 12:49 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] OT FBI Agent > > > And get on a

Re: [AFMUG] OT FBI Agent

And there’s that... From: Josh Luthman Sent: Thursday, June 23, 2016 12:49 PM To: af@afmug.com Subject: Re: [AFMUG] OT FBI Agent And get on a list you don't want to be on. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 23, 2016 2:41 PM,

Re: [AFMUG] OT FBI Agent

And get on a list you don't want to be on. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 23, 2016 2:41 PM, "Chuck McCown" wrote: > Anyone know an FBI or CIA agent? Like to talk to one about a listening > device design I

[AFMUG] OT FBI Agent

Anyone know an FBI or CIA agent? Like to talk to one about a listening device design I have. Hate to call the main number and start trying to drill down in their agency.

Re: [AFMUG] 450m

Cambium developed the panel in house. They are doing their own antenna development now. Daniel White Managing Director – Hardware Distribution Sales ConVergence Technologies Cell: +1 (303) 746-3590 dwh...@converge-tech.com > -Original Message- > From: Af [mailto:af-boun...@afmug.com] On

Re: [AFMUG] Semi-OT: Engine oil consumption

It's probably not related to aluminum vs iron block... aluminum engines are almost the standard now. I'd call a local dealer and ask if that much consumption is expected. It could improve after break in. As a counter example I run a small honda generator with an aluminum block which only holds

Re: [AFMUG] CNUT older than 4.8

I've got several versions archived. 4.6.9, 4.4.2, 3.20.19, 3.20.13, 3.20.5, 3.1r1, and 2.2. At least those are the pre-4.8 versions. Pick one or two, and we shall see. bp On 6/23/2016 10:26 AM, Ken Hohhof wrote: Anyone know where to get old versions of CNUT?

Re: [AFMUG] CNUT older than 4.8

I have 3_20_18. Probably too old to be of any use. On Thu, Jun 23, 2016 at 12:21 PM, Steve Utick wrote: > I've got 4.7.4, 4.6.9, 4.5.3 and 4.4.2 here if you would like a copy of > any of those. > > > On Thu, Jun 23, 2016 at 11:26 AM, Ken Hohhof wrote: > >>

Re: [AFMUG] CNUT older than 4.8

I've got 4.7.4, 4.6.9, 4.5.3 and 4.4.2 here if you would like a copy of any of those. On Thu, Jun 23, 2016 at 11:26 AM, Ken Hohhof wrote: > Anyone know where to get old versions of CNUT? Cambium only has 4.9 and > 4.8 on the website. > > I am trying to figure out why I get

Re: [AFMUG] Tornado Warning

We got lucky, only three semi serious injuries, no deaths. had a trailer with kids in it get pancaked, no injuries. A couple gas stations got hit pretty good, but structurally sound still, car lot lost a bunch of windshields. My niece lost her whole roof, it was rolled lead and it peeled it back,

[AFMUG] CNUT older than 4.8

Anyone know where to get old versions of CNUT? Cambium only has 4.9 and 4.8 on the website. I am trying to figure out why I get 430 SMs stuck in some weird mode wanting a reboot but not staying registered for more than a few seconds at a time, after upgrade to 12.x. Actually 12.x or

Re: [AFMUG] Semi-OT: Engine oil consumption

Aluminum block, but iron sleeves? Almost no one that I'm aware does a pure aluminum block since the Vega fiasco back in the 1970s. Aluminum is great for heat disipation, and lightness. However, you wouldn't typically see it used as an economy measure. bp On

Re: [AFMUG] Semi-OT: Engine oil consumption

If it was brand new, yes it takes some time for the rings to seat etc. From: Adam Moffett Sent: Thursday, June 23, 2016 10:48 AM To: af@afmug.com Subject: [AFMUG] Semi-OT: Engine oil consumption I had a Generac Guardian running continuously for two weeks. At the end of the two weeks I

Re: [AFMUG] Interesting spec

If the manufacturer has life spec related to heat, wouldn't that give you the number? On Thu, Jun 23, 2016 at 11:41 AM, Chuck McCown wrote: > I know that heat is bad for batts. Some manufacturers even have a life > spec related to heat. This ad was talking about the climate

Re: [AFMUG] Interesting spec

Well I know all of our cars/trucks now have a little insulation blanket around the battery. I'm assuming that's to protect the battery from the heat in the engine compartment. I suspect that the sustained temperature during operation is the issue, but I don't really know. Heat cycling is

[AFMUG] Semi-OT: Engine oil consumption

I had a Generac Guardian running continuously for two weeks. At the end of the two weeks I checked the oil and it was so low the dipstick came out dry. We added almost a quart. It's 990cc engine with an aluminum block. I've heard aluminum blocks can drink oil because they expand more with

Re: [AFMUG] 450m

i really don´t know, but maybe ETI and Cambium has done this System (450M) together.. 2016-06-23 17:45 GMT+02:00 Bill Prince : > I was just thinking about that, and also thinking the antenna would have to > be the size of a truck. > > Then I saw Daniel's response. > > You

Re: [AFMUG] Interesting spec

I know that heat is bad for batts. Some manufacturers even have a life spec related to heat. This ad was talking about the climate your car battery lives in. I am just curious if that is a true number. Like the average temperature versus average life of a car batt. From: Bill Prince

Re: [AFMUG] Interesting spec

Maybe if sustained? It's an ad Chuck. Distort the representation of a fact to support your argument. bp On 6/23/2016 9:29 AM, Chuck McCown wrote: Not sure if this is correct as it was stated in an ad for a battery regenerator, but they claim that for every 8.4

Re: [AFMUG] OT Private Sale of Domain Name

I had them do a PayPal personal transfer today. So far so good. I already sent them the transfer codes so hopefully nothing odd happens from here on out, lol! I felt good about the buyer, if it’s a scam, it’s quite an elaborate scam with links to several legit sources of their website, phone

Re: [AFMUG] Bill MacNemera ??

I know somebody that has, yes. On Jun 23, 2016 11:15 AM, "Jeremy" wrote: > Still doing the venture capital thing? The last I had any experience was > when I worked for Mel's company. He was the lender. > > On Thu, Jun 23, 2016 at 10:04 AM, Paul McCall

[AFMUG] Interesting spec

Not sure if this is correct as it was stated in an ad for a battery regenerator, but they claim that for every 8.4 deg C increase, a lead acid battery's life is cut in half.

Re: [AFMUG] 450m

Omnis are better for short range in general. You could use the sector version of the A5 for more rural deployments. On Thursday, June 23, 2016, Bill Prince wrote: > OK for very short range, but that's about it. Great if you're doing a > dinky neighborhood. Not useful for a

Re: [AFMUG] Bill MacNemera ??

Still doing the venture capital thing? The last I had any experience was when I worked for Mel's company. He was the lender. On Thu, Jun 23, 2016 at 10:04 AM, Paul McCall wrote: > Got a phone call from him today. Spinning things a slightly different > way. Anybody had

Re: [AFMUG] 450m

Yup... I'm convinced that ePMP and PMP450 are still the best options for a rural WISP. On Thu, Jun 23, 2016 at 10:47 AM, Bill Prince wrote: > OK for very short range, but that's about it. Great if you're doing a > dinky neighborhood. Not useful for a rural WISP. > > > bp >

Re: [AFMUG] [WISPA Members] Customer looking for service in Houston TX

Thanks James! Chris from your company already contacted me and I passed his info along. Regards, Jeff Jeff Broadwick Senior Account Manager, Convergence Technologies, Inc. jbroadw...@converge-tech.com 312-205-2519 Office 574-220-7826 Cell From: members-boun...@wispa.org

[AFMUG] Bill MacNemera ??

Got a phone call from him today. Spinning things a slightly different way. Anybody had semi-recent dealings with him? Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 pa...@pdmnet.net

Re: [AFMUG] 450m

OK for very short range, but that's about it. Great if you're doing a dinky neighborhood. Not useful for a rural WISP. bp On 6/23/2016 7:00 AM, Rory Conaway wrote: I think it’s called an Mimosa A5. Rory *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of

Re: [AFMUG] 450m

I was just thinking about that, and also thinking the antenna would have to be the size of a truck. Then I saw Daniel's response. You know where this is going... bp On 6/23/2016 6:20 AM, Kurt Fankhauser wrote: Actually i was just thinking, Do you think that

Re: [AFMUG] Cambium installation

Well, sync is kind of a significant thing to have... But yeah, there probably isn't a lot of advantage to ePMP over UBNT if that's all you're using it for... but why M series and not AC? On Thu, Jun 23, 2016 at 8:04 AM, Kurt Fankhauser wrote: > I'm not deploying any

Re: [AFMUG] 450m

I was joking with someone that for 900MHz the panel would be the size of the 6ft long table I was sitting at. Haven’t done the math, but I don’t think I’m that far off :-S Daniel White Managing Director – Hardware Distribution Sales ConVergence Technologies Cell: +1 (303) 746-3590

Re: [AFMUG] OT Private Sale of Domain Name

Wire transfer is pretty clean. From: Cassidy B. Larson Sent: Wednesday, June 22, 2016 5:17 PM To: af@afmug.com Subject: Re: [AFMUG] OT Private Sale of Domain Name What about Square’s Cash app? it’s instantaneous right into your bank account and free for debit cards. But personally I’d use

Re: [AFMUG] 450m

actually if Mimosa can do this, i wo der how hard it would be for cambium to make their own integrated 5ghz omni ap. That would really help me out on the towers that cant handle 4 sectors and just have enough room for an omni when i need morw throughput. Sent from my iPhone Kurt Fankhauser

Re: [AFMUG] 450m

I think it’s called an Mimosa A5. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Kurt Fankhauser Sent: Thursday, June 23, 2016 6:13 AM To: af@afmug.com Subject: Re: [AFMUG] 450m I would love to see an omni beemsteering antenna in 5ghz. On Thu, Jun 23, 2016 at 12:42 AM, Ken Hohhof

Re: [AFMUG] 450m

With 3,5GHz there are Polestyle Antennas with 3 2x2 from Alpha Wireless. Nothing in 5GHz. Von: Af [mailto:af-boun...@afmug.com] Im Auftrag von Kurt Fankhauser Gesendet: Donnerstag, 23. Juni 2016 15:13 An: af@afmug.com Betreff: Re: [AFMUG] 450m I would love to see an omni beemsteering

Re: [AFMUG] Cambium installation

Kurt I agree with you. I think epmp and ubnt both have their place and work well in a lot of situations but i have come to love 100 and 450 stuff so much i just rarely use anything else. When we install a 450 customer we know what we are going to get and we never go back. Just works great.

Re: [AFMUG] 450m

Actually i was just thinking, Do you think that medusa could be done in 900mhz? With the better interference rejection due to the beam steering and usually the 900mhz customers are spread out everywhere this might be a godsend for 900. Only wonder how big the sector antenna will be. On Wed,

Re: [AFMUG] 450m

I would love to see an omni beemsteering antenna in 5ghz. On Thu, Jun 23, 2016 at 12:42 AM, Ken Hohhof wrote: > As wide as 360 degrees? > > *From:* Forrest Christian (List Account) > *Sent:* Wednesday, June 22, 2016 10:04 PM > *To:* af >

Re: [AFMUG] Tornado Warning

Woke up this morning expecting many outages. Surprisingly didn't have any! Columbus weather forecasters were predicting 70mph winds potentially. I got about an inch of rain, Hardly any winds if any. Got lucky On Thu, Jun 23, 2016 at 3:24 AM, George Skorup wrote: > Yeah, I

Re: [AFMUG] Cambium installation

I'm not deploying any 802.11 anything chipset except on really small micro-sites. 90% of all towers get 450 rollouts. I'm just using the UBNT in the spots i need to do a little extra to get the signal to the customer, like put a micro repeater on a neighbors house. Tried doing it with EPMP and

Re: [AFMUG] Cambium installation

Have you really thought this through? - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Kurt Fankhauser" To: af@afmug.com Sent: Wednesday, June 22, 2016 9:41:11 PM

Re: [AFMUG] Tornado Warning

Yeah, I just ate dinner like an hour ago. How bad did Pontiac get hit? On 6/23/2016 1:43 AM, That One Guy /sarcasm wrote: well fuck. Nothing better than coming home from tarping a roof and finding a red network On Wed, Jun 22, 2016 at 10:46 PM, Jaime Solorza

Re: [AFMUG] Tornado Warning

well fuck. Nothing better than coming home from tarping a roof and finding a red network On Wed, Jun 22, 2016 at 10:46 PM, Jaime Solorza wrote: > I will bear this 100 plus degree weather we are having all week as opposed > to tornadoes... also read 80 people killed by