Re: [AFMUG] Anyone purchased an Eltek rectifier system recently?

I've only used their 2U shelves in 24V and -48V in 110V applicatons. So I'm not familiar with their 1U shelves. On Fri, Jul 15, 2016 at 10:34 AM, Eric Kuhnke wrote: > The closest Alpha equivalent to the Flatpack2 HE seems to be: > > >

Re: [AFMUG] Anyone purchased an Eltek rectifier system recently?

The closest Alpha equivalent to the Flatpack2 HE seems to be: http://www.alpha.com/index.php/products-mobile/cable-tv-broadband-products/item/48vdc-cordex-hp-24kw?category_id=440 http://tools.alpha.ca/library/showdocs.asp?PId=39F7=b=1 Which is actually more power dense, 4 x 2.4 kW

Re: [AFMUG] Anyone purchased an Eltek rectifier system recently?

Alpha requires 4U for 8kW: 125/220Vdc Cordex 4.4kW On Fri, Jul 15, 2016 at 10:13 AM, Eric Kuhnke wrote: > I need way more than 2000W, the Eltek unit pictured is 4 x 2000W > rectifiers running in parallel, nominally 8kW if running form a 240VAC > input source. Somewhat

Re: [AFMUG] Anyone purchased an Eltek rectifier system recently?

I need way more than 2000W, the Eltek unit pictured is 4 x 2000W rectifiers running in parallel, nominally 8kW if running form a 240VAC input source. Somewhat less on 208V. On Fri, Jul 15, 2016 at 7:06 AM, can...@believewireless.net < p...@believewireless.net> wrote: > For the distribution bus,

Re: [AFMUG] Anyone purchased an Eltek rectifier system recently?

For the distribution bus, we use ICT. It's 1U and they have a version that support two inputs in 1U. It allows you to power cycle your loads. You can connect it to the rectifier of your choice. We get these from Winncom. If you don't need the full 2000W, Alpha makes a 2U 48Vdc Cordex HP 1.2kW 2RU

Re: [AFMUG] Anyone purchased an Eltek rectifier system recently?

Looked, but the original FlatPack is not dense enough, the FlatPack2 and HE models are much smaller... I am figuring out if a design for a POP will fit in a single 45U rack with A and B power, each rectifier setup needs to be 3U to 4U height maximum. On Thu, Jul 14, 2016 at 10:52 AM, Peter Kranz

Re: [AFMUG] Anyone purchased an Eltek rectifier system recently?

I’d give ebay a scan, usually there are a few flatpack units there.. Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com From: Af [mailto:af-boun...@afmug.com] On Behalf Of Eric