Re: [AFMUG] Vibratory Plow

I think a missile is more useful than the small drill attachments. From: Chris Fabien Sent: Wednesday, March 22, 2017 7:47 AM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow We have an older maxi sneaker and pretty happy with it. They are somewhat tippy as Chuck stated but if you get

Re: [AFMUG] SNMP OID PTP450 ?

.1.3.6.1.4.1.161.19.3.1.4.1.35.2 Same OID all the way back to PTP100 On Wed, Mar 22, 2017 at 8:47 AM, Gino Villarini wrote: > Anyone has the OID to get the RX signal on the PTP Master? > > > > *Gino Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto

Re: [AFMUG] Vibratory Plow

Search on mole missile pneumatic boring tool. From: Chuck McCown Sent: Wednesday, March 22, 2017 8:59 AM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow Yes, if you get them aimed when you are starting them they do a pretty good job. Easy to transport, setup and use. No mess compared

Re: [AFMUG] OT Barber Shops

familysearch.org is free From: Josh Reynolds Sent: Wednesday, March 22, 2017 4:46 AM To: af@afmug.com Subject: Re: [AFMUG] OT Barber Shops You should get one of those AncestryDNA kits. The results can be pretty fascinating. I've actually found relatives of mine via DNA matches. On Mar 22,

Re: [AFMUG] Vibratory Plow

We have an older maxi sneaker and pretty happy with it. They are somewhat tippy as Chuck stated but if you get the dual tires they help a lot. Ours has been rolled down into a ditch once with no damage. Any of these machines will tip if you do something stupid. The LM42 I see used a lot by drop

Re: [AFMUG] Vibratory Plow

Yes, if you get them aimed when you are starting them they do a pretty good job. Easy to transport, setup and use. No mess compared to boring. From: Adam Moffett Sent: Wednesday, March 22, 2017 8:54 AM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow I assume you don't mean the type of

Re: [AFMUG] Fiber Store - Mikrotik compatible SFP's ??

I have these on my RB2011 and WS-12-250-DC http://www.fs.com/products/40191.html http://www.fs.com/products/29848.html Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Mar 21, 2017 at 6:44 PM, SmarterBroadband wrote: > Have

Re: [AFMUG] Vibratory Plow

I assume you don't mean the type of missile you launch at your enemies. I googled for "underground cable missile" and I'm directed to an article about some kind of pneumatic hammer/boring thing. Is that the correct device? -- Original Message -- From: "Chuck McCown"

Re: [AFMUG] Small-scale GPON

No, FS doesn't have them... Yet. They were supposed to be ordering GPON optics from Alphion to clone, but I don't if they ever did. If you Google hard enough, there's 2-3 companies that have them. On Mar 22, 2017 9:52 AM, "Adam Moffett" wrote: > So you mean you go to Fiber

[AFMUG] Teaching Older People Technology

I'm trying to teach my mom (almost 80) how to use a tablet (An older android model I have lying around). She has never used a computer, or anything with a touch screen. I figured learning a PC is completely out of the question. She's having nothing but problems because it just 'does things

Re: [AFMUG] SCADA testing

I had a Tonka dump truck when I was little. Seemed to be pretty good quality. On Tuesday, March 21, 2017, Jaime Solorza wrote: > Testing our RF and wired networks with Tonka engineer. He has cell > hotspot connected to laptop which is controlled by engineer back east

Re: [AFMUG] Vibratory Plow

But you have to have water, right? From: Gerard Dupont III Sent: Wednesday, March 22, 2017 10:22 AM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow We use the hell out of the roto witch on our 410sx to cross under sidewalks, driveways, and county roads. It doesn't need as large of an

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

Interesting. Just talked to SIAE yesterday and they won't have radios available for a while. I believe we have 2 ideas on the table though, to address this. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini Sent: Wednesday, March 22, 2017 1:02 AM To: af@afmug.com

Re: [AFMUG] Vibratory Plow

They don't use water in the demonstration videos I've watched. -- Original Message -- From: "Chuck McCown" To: af@afmug.com Sent: 3/22/2017 12:31:03 PM Subject: Re: [AFMUG] Vibratory Plow But you have to have water, right? From:Gerard Dupont III Sent: Wednesday,

Re: [AFMUG] Vibratory Plow

Trenchers are nice for when you want to lay 1.25” duct. Smaller plows will not plow that size. From: Jason McKemie Sent: Wednesday, March 22, 2017 10:06 AM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow What do you find that you use the trencher for? Getting close to things? On

Re: [AFMUG] Vibratory Plow

We use the hell out of the roto witch on our 410sx to cross under sidewalks, driveways, and county roads. It doesn't need as large of an entry/exit pit as a mole does. It doesn't require us to bring an air compressor either. On Wed, Mar 22, 2017 at 10:59 AM, Chuck McCown wrote:

Re: [AFMUG] SNMP OID PTP450 ?

Is this a scheduled daily e-mail? - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Gino Villarini" To: af@afmug.com Sent: Wednesday, March 22, 2017 9:47:56 AM Subject: [AFMUG]

Re: [AFMUG] Vibratory Plow

No water is used with these. It uses a tapered dry compaction bit instead of cutting a hole like the normal HDD rigs do. On Wed, Mar 22, 2017 at 12:31 PM, Chuck McCown wrote: > But you have to have water, right? > > *From:* Gerard Dupont III > *Sent:* Wednesday, March 22, 2017

Re: [AFMUG] IPArchitects - feedback

I'll gladly pay more to get the correct answer quickly, then pay someone "less" wasting time looking for the answer. On Wed, Mar 22, 2017 at 1:15 PM, Chris Wright wrote: > We’ve used them in the past. They are as capable as they are expensive. > > > > Chris Wright > >

Re: [AFMUG] SNMP OID PTP450 ?

Thanks! Ill try it From: Af > on behalf of Steve Utick > Reply-To: "af@afmug.com" > Date: Wednesday, March 22, 2017 at 11:01 AM To:

Re: [AFMUG] Vibratory Plow

In addition to using it to make a trench for the boring tool, we also find it handy for crossing ditches that are too steep or wet to drive the machine across. You can trench across a fairly wide trench if you can pull the machine up to the edge on either side of it. On Wed, Mar 22, 2017 at 12:06

Re: [AFMUG] PMP450i 3.65ghz availability

Available and in stock! Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell jbroadw...@converge-tech.com > On Mar 22, 2017, at 2:46 PM, Kurt Fankhauser wrote: > > Does anyone know when the 450i version of the 3.65Ghz APs will be

Re: [AFMUG] SCADA testing

Ha... Great toys On Mar 22, 2017 10:30 AM, "Jason McKemie" wrote: > I had a Tonka dump truck when I was little. Seemed to be pretty good > quality. > > On Tuesday, March 21, 2017, Jaime Solorza > wrote: > >> Testing our RF and wired

Re: [AFMUG] SNMP OID PTP450 ?

It's come through each time and you've had responses. ;-) - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Gino Villarini" To: af@afmug.com Sent: Wednesday, March 22, 2017

Re: [AFMUG] Vibratory Plow

Chuck you might be thinking of a different process. The compaction boring setup is just a small high-torque hydraulic drive on the plow that allows you to attach a short drill string. 10ft sections of solid steel shaft about 3/4" diameter with a compaction auger head on the end. You just make a

[AFMUG] PMP450i 3.65ghz availability

Does anyone know when the 450i version of the 3.65Ghz APs will be available?

Re: [AFMUG] IPArchitects - feedback

We’ve used them in the past. They are as capable as they are expensive. Chris Wright Network Administrator From: Af [mailto:af-boun...@afmug.com] On Behalf Of Cameron Crum Sent: Tuesday, March 21, 2017 9:44 PM To: af@afmug.com Subject: Re: [AFMUG] IPArchitects - feedback Good bunch of guys who

Re: [AFMUG] Fiber Store - Mikrotik compatible SFP's ??

We’ve used Generics and HP’s on our Mikrotiks, Generics in our Netonixes. One thing noteworthy: I have never been able to get Netonix switches and RB2011 routers to play nice for long over SFP. (All other Mikrotik models seem to work fine.) If something happens to disrupt Layer 1 (Reboot, SFP

Re: [AFMUG] IPArchitects - feedback

I don't want to speak out of turn, but I think you have to buy a minimum block of time, like 10 hrs if I remember right. I don't think the time expires so if you have an issue that only takes 2 hrs, then you still get your remaining hours to use if you have another issue later. On Wed, Mar 22,

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

It still needs feedback from the radios as far as I can tell but it's an interesting idea. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini Sent: Wednesday, March 22, 2017 10:48 AM To: af@afmug.com Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

It's quite surprising that this hasn't happened already. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Rory Conaway" To: af@afmug.com Sent: Wednesday, March 22, 2017

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

Your idea did give me a lead though. Thanks. rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini Sent: Wednesday, March 22, 2017 10:48 AM To: af@afmug.com Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links SDWAN? From: Af

Re: [AFMUG] IPArchitects - feedback

Not out of turn at all! You’re absolutely correct – 10 hour minimum. Chris Wright Network Administrator From: Af [mailto:af-boun...@afmug.com] On Behalf Of Cameron Crum Sent: Wednesday, March 22, 2017 10:33 AM To: af@afmug.com Subject: Re: [AFMUG] IPArchitects - feedback I don't want to speak

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

Not a lot of people are trying to bond 10Gbps wireless circuits. Even the products themselves are fairly new or still in development. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett Sent: Wednesday, March 22, 2017 12:57 PM To: af@afmug.com Subject: Re: [AFMUG] Best switch

[AFMUG] aerial drop cable

Do you have any favorite brands or models for 4 strand aerial drop cable?

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

The bonding of 10G is the easy part. The management of data flows with regards to throughput capabilities on each link is the part that I'm surprised is taking so long to mature. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP -

Re: [AFMUG] Adtran TA5000 Pricing

Thanks … I had seen that before but missed the tab that has TA5000 Thanks, Paul > On Mar 22, 2017, at 8:13 PM, Colin Stanners wrote: > > From Google, look at > https://s3-us-west-2.amazonaws.com/wsca-uploads/1420828908_Adtran%20Price%20List.xls > >

Re: [AFMUG] SNMP OID PTP450 ?

No, I was not seeing my earlier sents From: Af > on behalf of Mike Hammett > Reply-To: "af@afmug.com" > Date: Wednesday, March 22, 2017 at 1:17 PM

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

SDWAN? From: Af > on behalf of Rory Conaway > Reply-To: "af@afmug.com" > Date: Wednesday, March 22, 2017 at 12:47 PM To:

Re: [AFMUG] Small Scale PON

ZTE's C320 is shipping now along with trials in work. From: Jason McKemie To: "af@afmug.com" Sent: Wednesday, March 22, 2017 5:14 PM Subject: Re: [AFMUG] Small Scale PON But when is this actually going to be available? On Wednesday,

Re: [AFMUG] IPArchitects - feedback

Derek could probably answer that best. On Wed, Mar 22, 2017 at 5:13 PM, can...@believewireless.net < p...@believewireless.net> wrote: > What is the minimum block they bill at? > > On Wed, Mar 22, 2017 at 5:47 PM, Sterling Jacobson > wrote: > >> I don’t mind that as long as

Re: [AFMUG] IPArchitects - feedback

Just got off the phone with Derek and it was a good conversation. I’m scheduled for a technical phone call tomorrow morning to get started. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Cameron Crum Sent: Wednesday, March 22, 2017 4:27 PM To: af@afmug.com Cc: Derek Anderson

Re: [AFMUG] Small Scale PON

But when is this actually going to be available? On Wednesday, March 22, 2017, Keefe John wrote: > How does it compare to UBNT new uFiber OLT? > > 8-Port GPON Optical Line Terminal > > 8 Gigabit Passive Optical Network Ports > Supports up to 1024 Clients (128 per PON

Re: [AFMUG] Small Scale PON

Compares quite well, and, the backplane provides scalability for XGS-PON if interested. From: Keefe John To: af@afmug.com Sent: Wednesday, March 22, 2017 5:04 PM Subject: Re: [AFMUG] Small Scale PON How does it compare to UBNT new uFiber OLT? 8-Port GPON

[AFMUG] Juniper SRX Platform

Anyone out there used the SRX series firewalls/UTM appliances from Juniper? I'm moving away from Mikrotik and wanted to go with something on the "known compatible" list with AWS. Never been a fan of Cisco and have heard generally good things about Juniper. Just curious if their UTM compares

Re: [AFMUG] Small Scale PON

How does it compare to UBNT new uFiber OLT? 8-Port GPON Optical Line Terminal 8 Gigabit Passive Optical Network Ports Supports up to 1024 Clients (128 per PON Port) Up to 2.488 Gbps TX and 1.244 Gbps RX Supports up to 20 km GPON Links Two 1G/10G SFP+ Ethernet Ports Flexible Layer 2/3 Management

Re: [AFMUG] Small-scale GPON

ZTE's WAN and LAN cards have SFPs. Parker ReedZTE USA From: George Skorup To: af@afmug.com Sent: Tuesday, March 21, 2017 8:49 PM Subject: Re: [AFMUG] Small-scale GPON I assume ZTE doesn't care about SFP branding? On 3/21/2017 7:05 PM, Chuck Hogg

Re: [AFMUG] IPArchitects - feedback

What is the minimum block they bill at? On Wed, Mar 22, 2017 at 5:47 PM, Sterling Jacobson wrote: > I don’t mind that as long as I’m not spending an hour minimum billing for > a couple of emails replys. > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chris

Re: [AFMUG] IPArchitects - feedback

I don’t mind that as long as I’m not spending an hour minimum billing for a couple of emails replys. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chris Wright Sent: Wednesday, March 22, 2017 2:37 PM To: af@afmug.com Subject: Re: [AFMUG] IPArchitects - feedback Not out of turn at all!

[AFMUG] Small Scale PON

If anyone has any questions regarding ZTE products, to include our GPON, TDD LTE or transport products, please feel free to contact me. Best - Parker ReedDirector of SalesZTE USA

Re: [AFMUG] aerial drop cable

I like the Prysmian flat drop, usually get it with a trace wire and strip that off if I'm doing aerial. It's available w/o trace wire as well. I usually find it in 2 or 6 strand variants, however. On Wednesday, March 22, 2017, Adam Moffett wrote: > Do you have any favorite

[AFMUG] Dumb Question

Why are fiber drop cables flat?

Re: [AFMUG] Vibratory Plow

Like this one? http://www.southern-tool.com/store/uw_boring_machines.php On 3/22/2017 7:12 PM, Chuck McCown wrote: I don’t think I have ever seen this. *From:* Chris Fabien *Sent:* Wednesday, March 22, 2017 12:50 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] Vibratory Plow Chuck you might be

[AFMUG] AF5x OIDs

Would anyone be willing to share the OIDs they are using for the AF5x? Not looking for anything specifically, just any/all that you use for monitoring. I'd rather not go through the MIB if I don't have to. I appreciate it. Thanks Josh Sent from my iPhone

Re: [AFMUG] Dumb Question

The standard is one buffer tube at the middle, with one strength member on each side. Maybe the additional strength members of a rounded cable increases cost but doesn't help strength? Or as flat cable takes up less space on the reel? On Wed, Mar 22, 2017 at 8:32 PM, Adam Moffett

Re: [AFMUG] Vibratory Plow

This is what we do but without the backreamer. https://youtube.com/watch?v=N_LS6u0BkKY On Wed, Mar 22, 2017 at 9:47 PM Nate Burke wrote: > Like this one? > > http://www.southern-tool.com/store/uw_boring_machines.php > > > > > On 3/22/2017 7:12 PM, Chuck McCown wrote: > > I

Re: [AFMUG] Dumb Question

It copies the standard for telephone drop cables and works with the same drop wire clamps that have been used for years. As to why telephone drop cable is flat probably requires research into old telco practices. Given the amount of research Bell Labs did over the years I’m sure there is a

Re: [AFMUG] Dumb Question

You mean like ribbon? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Mar 22, 2017 at 9:32 PM, Adam Moffett wrote: > Why are fiber drop cables flat? >

Re: [AFMUG] Dumb Question

Hum… thinking about it more. The phone drop would have originally been two parallel conductors with insulation. They were not originally twisted pairs in the phone network and placing the two wires flat next to each other uses the least insulation material.

Re: [AFMUG] Vibratory Plow

We did extensive testing… Our LM42 we bought was great with direct burial, but not good with a chute for ¾” pipe. It was reliable, but in harder ground it was an issue – no setting for the angle when going shallow. We even custom built a chute… great concept, but not practical for our

Re: [AFMUG] AF5x OIDs

Temperature 1 .1.3.6.1.4.1.41112.1.3.2.1.7.1 Temperature 2 .1.3.6.1.4.1.41112.1.3.2.1.9.1 RX Capacity .1.3.6.1.4.1.41112.1.3.2.1.5.1 TX Capacity .1.3.6.1.4.1.41112.1.3.2.1.6.1 RX Signal Strength 0 .1.3.6.1.4.1.41112.1.3.2.1.11.1 RX Signal Strength 1 .1.3.6.1.4.1.41112.1.3.2.1.14.1 Seems

Re: [AFMUG] Dumb Question

P clamps. From: Mark Radabaugh Sent: Wednesday, March 22, 2017 8:19 PM To: af@afmug.com Subject: Re: [AFMUG] Dumb Question It copies the standard for telephone drop cables and works with the same drop wire clamps that have been used for years. As to why telephone drop cable is flat

Re: [AFMUG] Vibratory Plow

Good to know. I didn’t know Ditch Witch had such a beast. How deep are you putting the drops? From: Joe Sent: Wednesday, March 22, 2017 8:54 PM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow We did extensive testing… Our LM42 we bought was great with direct burial, but not good

Re: [AFMUG] Dumb Question

I've used these in a few locations. I always end up ditching the shim though - you'd have to have some pretty skinny cable to use it. On Wednesday, March 22, 2017, Chuck McCown wrote: > P clamps. > [image: Image result for p clamp drop wire] > > *From:* Mark Radabaugh > *Sent:*

Re: [AFMUG] Vibratory Plow

I have seen guys do this with a water pipe with water flowing through it. Just work it back and forth. They may have had a cap on it with holes. In good digging it went right through. From: Gerard Dupont III Sent: Wednesday, March 22, 2017 8:19 PM To: af@afmug.com Subject: Re: [AFMUG]

Re: [AFMUG] Vibratory Plow

What I am talking about is a hydra bore attachment for the maxi sneaker. From: Nate Burke Sent: Wednesday, March 22, 2017 7:47 PM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow Like this one? http://www.southern-tool.com/store/uw_boring_machines.php On 3/22/2017 7:12 PM, Chuck

Re: [AFMUG] Vibratory Plow

Is it an R80? That is the only one that seems tracked and articulated. From: Joe Sent: Wednesday, March 22, 2017 8:54 PM To: af@afmug.com Subject: Re: [AFMUG] Vibratory Plow We did extensive testing… Our LM42 we bought was great with direct burial, but not good with a chute for ¾”

Re: [AFMUG] Vibratory Plow

How deep can the zahn go though? Last I looked, it was considerably lighter duty than the 410sx. On Wednesday, March 22, 2017, Joe wrote: > We did extensive testing… > > > > Our LM42 we bought was great with direct burial, but not good with a chute > for ¾” pipe. > > It

Re: [AFMUG] OT Barber Shops

You should get one of those AncestryDNA kits. The results can be pretty fascinating. I've actually found relatives of mine via DNA matches. On Mar 22, 2017 12:13 AM, "George Skorup" wrote: > George #1 was a barber. Came over early 1900's. George #2 says #1 was >

Re: [AFMUG] Fiber Store - Mikrotik compatible SFP's ??

>>> Shipped from WA. Cool, guess they're stock some stuff state side now. Yes that is true.. I believe they have been expanding their operations in the US. >>. there's no difference in the optic up to 20km. They're all the same. The >>only difference is the label and DDM info. Yes and

Re: [AFMUG] Best switch for bonding dual 10Gbps radio links

Seems like you might need some Cisco and SIAE gear? http://www.cisco.com/c/en/us/solutions/collateral/service-provider/unified-ran-backhaul/white_paper_c11-728355.html From: Af > on behalf of Rory Conaway

[AFMUG] WTB: Packetflux standby power controller

Anyone has any laying around? Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

Re: [AFMUG] Small-scale GPON

I am replacing my Alphion shelf if anyone is interested in it and ~30 ONTs. On Wed, Mar 22, 2017 at 8:07 AM Chuck Hogg wrote: > No, I've got multiple brands working. > > On Tue, Mar 21, 2017 at 9:49 PM George Skorup > wrote: > > I assume ZTE

Re: [AFMUG] Small-scale GPON

No, I've got multiple brands working. On Tue, Mar 21, 2017 at 9:49 PM George Skorup wrote: > I assume ZTE doesn't care about SFP branding? > > > On 3/21/2017 7:05 PM, Chuck Hogg wrote: > > It's not open standard. They key their optics like calix. > > On Tue, Mar 7,

Re: [AFMUG] Small-scale GPON

some folks were saying how great Alphion is .. why are you selling? > On Mar 22, 2017, at 8:09 AM, Chuck Hogg wrote: > > I am replacing my Alphion shelf if anyone is interested in it and ~30 ONTs. > > On Wed, Mar 22, 2017 at 8:07 AM Chuck Hogg

Re: [AFMUG] Small-scale GPON

You can buy third party Alphion optics, if that's who you are talking about. And yes, they work. On Mar 21, 2017 7:05 PM, "Chuck Hogg" wrote: > It's not open standard. They key their optics like calix. > > On Tue, Mar 7, 2017 at 12:11 AM Josh Reynolds