Mobile: 510-207-
pkr...@unwiredltd.com
-Original Message-
From: Af [mailto:af-bounces+pkranz=unwiredltd@afmug.com] On Behalf
Of Shayne Lebrun via Af
Sent: Wednesday, September 17, 2014 1:23 PM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP Force 100 beefy
450 is being made
with the patch and install it yourself, even assuming
you feel comfortable doing that.
From: Shayne Lebrun via Af mailto:af@afmug.com
Sent: Sunday, September 28, 2014 7:00 PM
To: af@afmug.com
Subject: Re: [AFMUG] Bash specially-crafted environment variablescodeinjection
attack
Quite honestly
on everything that has Linux inside, or
recompile the source code with the patch and install it yourself, even assuming
you feel comfortable doing that.
From: Shayne Lebrun via Af mailto:af@afmug.com
Sent: Sunday, September 28, 2014 7:00 PM
To: af@afmug.com
Subject: Re: [AFMUG] Bash specially
of the
ordinary has appeared.
-Tim
From: Af [mailto:af-bounces+tim=velociter@afmug.com] On Behalf Of Shayne
Lebrun via Af
Sent: Monday, September 29, 2014 4:51 AM
To: af@afmug.com
Subject: Re: [AFMUG] Bash specially-crafted environment variablescodeinjection
attack
Originally, I
SSaaS: Surge Supression as a Service.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul Conlin via Af
Sent: Monday, September 29, 2014 4:59 PM
To: af@afmug.com
Subject: Re: [AFMUG] Tower Top Switch Surge Protection Question
If you don't have a surge suppressor then you need a tower
Well, it depends on what you’re trying to do. If you’re trying to block DHCP
packets from a specific device, then yes, define the source specifically.
Otherwise, leave it open.
I’d try ‘dst port 68,’ myself.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ty Featherling via Af
have to explicitly configure the SM to
operate in Standard WiFi mode (from the Quick Start or Configuration-Radio
page) to connect to an AP operating standard 802.11.
Thanks,
Sriram
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Shayne Lebrun via Af
Sent: Thursday, October 09, 2014 8
‘reset’ is a good old soft reboot. ‘engreset’ scares me. I wouldn’t try it.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sam Kirsch via Af
Sent: Thursday, October 23, 2014 2:43 PM
To: af@afmug.com
Subject: [AFMUG] Reset Canopy Web Interface without Reboot?
We've got a 430AP that's
And don’t forget a separate config for sitemonitor base version 1 versus
version 2.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Forrest Christian (List
Account) via Af
Sent: Saturday, October 25, 2014 3:28 PM
To: af
Subject: Re: [AFMUG] Cacti SiteMonitor: What did I break?
Most
This. Say my AP can do ten megs/second of downlink to clients. My throughput
chart is flatlined at 6 mb/s.
Why? Is it because some of the clients are in lower modulations, and using
more timeslots to move a given amount of data than they should? Is it that the
radio is doing lots of
Get rid of 5.26; in my experience, it has odd packet loss problems.
Drop down to 5.19, or go up to 6.
Also, what happens to the email that 'doesn't reach it's destination?' Are
you having problems sending, or receiving?
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On
4:18 AM, Shayne Lebrun via Af wrote:
Get rid of 5.26; in my experience, it has odd packet loss problems.
Drop down to 5.19, or go up to 6.
Also, what happens to the email that 'doesn't reach it's destination?'
Are you having problems sending, or receiving?
-Original Message-
From
old phone cables
that were buried a couple decades ago. Maybe an MTU issue, but I'm
guessing that it's load related; and SMTP is more sensitive to the issue
than most other things.
bp
On 10/31/2014 4:18 AM, Shayne Lebrun via Af wrote:
Get rid of 5.26; in my experience, it has odd packet
What we need to do is get people to view the ‘internet light’ like the ‘check
engine’ light on their car. It could mean ‘your gas cap is loose’ or it could
mean ‘your driveshaft just fell out of your car’ but if you want to know, it’s
going to cost $250 just for somebody to open the hood and
Find an old laptop running windows XP or (even better) Windows 2000.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af
Sent: Wednesday, November 26, 2014 8:38 AM
To: af@afmug.com
Subject: Re: [AFMUG] SiteMonitor discovery IP or factory reset
I tried one of each. No
General reminder: when hardcoding Ethernet, you must hardcode both ends to
the same settings. You cannot hardcode one end, as autonegotiate cannot
properly deal with that scenario.
Removing advertised speeds and duplexes, on the other hand, can be done on
one end.
Also, mikrotik's safe mode is
and then broke it again in 13.2.
I'm also wondering if the 450 APs would be happier talking to a non gigabit
router port, or maybe with the gigabit version of SyncInjector, although I
have other APs that are happy with this setup.
-Original Message-
From: Shayne Lebrun via Af
Sent
, Shayne Lebrun via Af wrote:
Find an old laptop running windows XP or (even better) Windows 2000.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af
Sent: Wednesday, November 26, 2014 8:38 AM
To: af@afmug.com
Subject: Re: [AFMUG] SiteMonitor discovery IP or factory reset
I
So throw in BFD, maybe?
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mark Radabaugh via Af
Sent: Monday, December 1, 2014 8:52 AM
To: af@afmug.com
Subject: Re: [AFMUG] ERPS: G.8032 vs Brocade MRP vs ?
We are evaluating vendors for this at the moment. Ciena is
The APs can be synchronized for time/date/timezone; just have 'scheduled full
SA' as an option.
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Wednesday, December 3, 2014 7:15 PM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta
A mikrotik with a memory card would probably do. You might even already
have one laying around.
A 433AH, with a microSD card would likely do just fine, and will be awfully
easy on the electric bill. And will run forever until the SD card gives
out, so long as you're not storing it in a furnace.
Subject: Re: [AFMUG] Local FTP/HTTP Server
I thought about that, but unless I'm missing something, you can't do HTTP
from a mikrotik unless you run Metarouter with another image, unless the
hotspot is running.
On 12/9/2014 12:48 PM, Shayne Lebrun via Af wrote:
A mikrotik with a memory card would
Bear in mind that unless you’ve increased your MTU from end to end, or dropped
the MTU on your two devices that the EoIP are bridging, you’re going to get
packet fragmentation.
Otherwise, what RouterOS version?
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Erich Kaiser via Af
Sent:
just pulled up the EOIP
interfaces on each router and they are all set for 1500. Should we be
increasing this number as a best practice when building EOIP Tunnels?
On Wed, Dec 10, 2014 at 3:52 PM, Shayne Lebrun via Af af@afmug.com wrote:
Bear in mind that unless you’ve increased your MTU from
Go to your local thrift store, buy an old microwave. Install in your lab.
Instant noise generator, *and* you can cook lunch.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ty Featherling via Af
Sent: Wednesday, December 10, 2014 5:24 PM
To: af@afmug.com
Subject: [AFMUG] simulating
Hmm, that reminds me, Mikrotik used to have some sort of alignment mode that
would tell the AP to transmit full-bore across a given frequency. Dunno if it
still does.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof via Af
Sent: Wednesday, December 10, 2014 9:08 PM
To:
packets? I could that potentially
being a pretty big problem.
On Wed, Dec 10, 2014 at 4:49 PM, Shayne Lebrun via Af af@afmug.com wrote:
To my understanding, it works like this:
Say you take an IP packet coming into ether1, and it’s full MTU; 1500 bytes.
Now, you want to bridge ether1
Rule 1: Don't change anything major on Friday, unless you like working
Saturday. And Sunday.
Rule 2: Don't change anything major on Monday. It's Monday.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall via Af
Sent: Friday, January 2, 2015 9:22 AM
To: af@afmug.com
Subject:
in that Shayne?
It's not like we are doing a major tower upgrade today and tomorrow also.
Oh, yeah, we are doing that too J
Paul
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Shayne Lebrun via Af
Sent: Friday, January 02, 2015 10:28 AM
To: af@afmug.com
Subject: Re: [AFMUG] List
29 matches
Mail list logo
