Re: [AFMUG] Wiring batteries with F terminals in parallel+series

Sent: Tuesday, May 10, 2016 1:05 PM To: af@afmug.com Subject: Re: [AFMUG] Wiring batteries with F terminals in parallel+series n+1 wires on one 1/4" QD post is exactly what that does. Maybe I don't understand I would lean towards the standard of fusing between paralleled batteries t

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

I see now, if you zoom in it's one male and one female. That's fantastic! 5A slowblo fuses have worked just fine for me. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, May 10, 2016 at 2:05 PM, George Skorup wrote: >

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

n+1 wires on one 1/4" QD post is exactly what that does. Maybe I don't understand I would lean towards the standard of fusing between paralleled batteries though. At least with large-ish batteries that can dump enough current from a good string to another with a shorted cell and burn up

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

That's pretty neat! I need two wire one F tab though. On May 10, 2016 1:48 PM, "George Skorup" wrote: > These can come in handy too... > > > http://www.amazon.com/Morris-Products-Disconnect-Insulated-12-10/dp/B005GDFDI0 > > On 5/10/2016 11:48 AM, Josh Luthman wrote: > > Oh

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

These can come in handy too... http://www.amazon.com/Morris-Products-Disconnect-Insulated-12-10/dp/B005GDFDI0 On 5/10/2016 11:48 AM, Josh Luthman wrote: Oh awesome, thank you! I wish I had saved one of these pictures. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

Buying a crimper for Anderson Power Pole and a set of the connectors has saved me a lot of time. I found them useful for vehicle repair/modification purposes as well. It's just a regular ratcheting crimper but comes with the die for the three most common sizes.

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

I got it on list. I don't have access via Drive (don't need it, though =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, May 10, 2016 at 12:47 PM, Jason Wilson wrote: > If the image was stripped here is the

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

Oh awesome, thank you! I wish I had saved one of these pictures. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, May 10, 2016 at 12:45 PM, Jason Wilson wrote: > I hit send too quick. This is what APC does.

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

If the image was stripped here is the link ​ IMG_20160510_094036733_HDR.jpg ​ Jason Wilson Remotely Located Providing High Speed Internet to out of the way places.

Re: [AFMUG] Wiring batteries with F terminals in parallel+series

I hit send too quick. This is what APC does. Here is the Power Pole Connector that they use. Pretty much a standard. https://powerwerx.com/anderson-sb-connectors-sb50-50amp Jason Wilson Remotely Located Providing High Speed Internet to out of the way places. 530-651-1736 530-748-9608 Cell

[AFMUG] Wiring batteries with F terminals in parallel+series

I have 8 batteries that I want 24v to come off of. Any suggestions or parts to get two leads on the F terminals? http://i.imgur.com/r3X21cw.jpg My only idea right now is to solder the wires together near the terminals and then tape/wrap it. Josh Luthman Office: 937-552-2340 Direct: