Re: [Emc-users] GibbsCAM machine .pst file.

2024-03-27 Thread Phill Carter via Emc-users
If you cannot get a post processor for LinuxCNC then another option would be to run the Fanuc g-code file through a Python filter program to automate any required changes: > On 28 Mar 2024, at 2:01 pm, John Dammeyer wrote: > >

[Emc-developers] Buildbot Failing

2023-12-06 Thread Phill Carter via Emc-developers
Buildbot is failing with the following: fatal: Unable to create '/home/buildslave/emc2-buildbot/wheezy-rtai-i386-clang/wheezy-rtai-i386-clang/source/.git/packed-refs.lock': Read-only file system ___ Emc-developers mailing list

[Emc-developers] Buildbot Error

2023-11-05 Thread Phill Carter via Emc-developers
It seems that Builder 4041.deb-buster-rtpreempt-amd64 has run out of disk space. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] LinuxCNC 2.9 is Released

2023-11-05 Thread Phill Carter via Emc-users
> On 5 Nov 2023, at 21:12, Andy Pugh wrote: > >  > >> On 5 Nov 2023, at 08:39, Thomas J Powderly wrote: >> >> Install Debian Buster (Debian 12), amd64 verison > > I am not going to have access to a PC today. > Could someone else do this? (And fix the verison misspelling too) Done. >

Re: [Emc-developers] lost file or mind?

2023-10-06 Thread Phill Carter via Emc-developers
> On 7 Oct 2023, at 3:32 pm, Thomas J Powderly wrote: > > Hello, > > I cannot find a file used in my .ini / > But the .ini runs fine from picker > > the 'lost' file from the iniT ... > > EMBED_TAB_COMMAND = pyvcp bars.xml The file name would be bars.xml > > > After a lot of searching,

Re: [Emc-developers] Forum Is Slow

2023-09-03 Thread Phill Carter via Emc-developers
> On 4 Sep 2023, at 3:43 am, John Thornton wrote: > > I just updated a few packages and rebooted, did that help you? Yep, it seems good now. Thanks. > > JT > > On 9/2/2023 6:55 PM, Phill Carter via Emc-developers wrote: >> Is someone on this list able to r

[Emc-developers] Forum Is Slow

2023-09-02 Thread Phill Carter via Emc-developers
Is someone on this list able to reboot the forum, it is slow to the point of being unusable. ___ Emc-developers mailing list

Re: [Emc-users] pyvcp in Axis tab

2023-08-25 Thread Phill Carter via Emc-users
It works on the current 2.9 > On 26 Aug 2023, at 3:07 pm, Thomas J Powderly wrote: > > Hello > I want to embed pyvcp into a tab of Axis interface. > My attempts so far got me the new tab > but the pyvcp panel ( or pyTkinter panel) is free floating. > The panel is not embedded, > > There was

[Emc-developers] Docs

2023-08-11 Thread Phill Carter via Emc-developers
I was doing some minor doc changes to 2.9 and master and I noticed that there is a sim for 'craftsman' which appears to be python2/gtk2. Is anyone intending to convert it to python3/gtk3 or should it be removed? ___ Emc-developers mailing list

[Emc-developers] Buildbot

2023-08-10 Thread Phill Carter via Emc-developers
Buildbot seems to be asleep. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

2023-07-08 Thread Phill Carter via Emc-users
> On 8 Jul 2023, at 2:21 am, John Allwine wrote: > > Can you attach a G code program that uses G93 that demonstrates the issue > you’re describing with your INI config file you’re using? I think these are the last ones used for my tests. axis_tube_cutting.ini Description: Binary data

Re: [Emc-developers] Merge Conflicts

2023-06-19 Thread Phill Carter via Emc-developers
> On 19 Jun 2023, at 4:35 pm, Hans Unzner wrote: > > Am 19.06.23 um 05:01 schrieb Phill Carter via Emc-developers: >> Could someone with a bit more knowledge of the documents than me please fix >> the merge conflicts from 2.9 to master. >> >> I h

[Emc-developers] Merge Conflicts

2023-06-18 Thread Phill Carter via Emc-developers
Could someone with a bit more knowledge of the documents than me please fix the merge conflicts from 2.9 to master. I have broken enough things recently. Cheers, Phill ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net

Re: [Emc-users] Glitch in PlasmaC?

2023-06-04 Thread Phill Carter via Emc-users
The VAD threshold is what the velocity is allowed to drop to after the THC is activated. THC won't activate until the velocity has reached 99.9% of the cut feed rate setting. > On 4 Jun 2023, at 5:53 pm, Viesturs Lācis wrote: > > Hello! > > I have an issue with PlasmaC. The thing is that VAD

Re: [Emc-developers] feed hold ?

2022-12-04 Thread Phill Carter
There is a motion.jog-inhibit pin in 2.9 and later > On 5 Dec 2022, at 7:16 am, Chris Morley wrote: > > Yes it was miss named but it was meant to stop all motion. Only a thread pass > would finish. Which you could certainly argue was wrong too. > > After I realized the name was bad it was

Re: [Emc-developers] Eye candy is important - Titan got a new German friend - want that reaction for a LinuxCNC controller

2022-11-30 Thread Phill Carter
> On 1 Dec 2022, at 10:27 am, Steffen Moeller wrote: > > > Am 30.11.2022 um 19:12 schrieb Chris Morley: >> The difference is free cad doesn't compete with anything in linuxcnc. Qtpycp >> does. If they wanted to be included in linuxcnc, then they would have been >> part of the project. They

Re: [Emc-developers] Eye candy is important - Titan got a new German friend - want that reaction for a LinuxCNC controller

2022-11-29 Thread Phill Carter
> On 30 Nov 2022, at 7:54 am, Rod Webster wrote: > > @steffen, there is a script to install qtpyvcp dependencies in: > > /usr/lib/python3/dist-packages/qtvcp/designer/install_script > > Its documented in QTplasmac, not sure if its mentioned elsewhere >

Re: [Emc-developers] time delay hal component for lube pump

2022-11-21 Thread Phill Carter
> On 22 Nov 2022, at 12:35 pm, Jon Elson wrote: > > On 11/21/22 17:13, Feral Engineer wrote: >> Classicladder is awesome for this  > But, way overkill for just one function. > Maybe I should use timedelay as a template and write my own one-shot > component. There is an existing oneshot

Re: [Emc-users] can someone get list of deps I needtoinstallsothatsim/qtdragon will start on buster?

2022-11-11 Thread Phill Carter
> On 12 Nov 2022, at 11:42 am, gene heskett wrote: > > On 11/11/22 17:27, Phill Carter wrote: > > This is rediculous, I just crashed tbird trying to report what I found. >>> On 11 Nov 2022, at 10:42 pm, gene heskett wrote: >>> >>> On 11/11/22 0

Re: [Emc-users] can someone get list of deps I need toinstallsothatsim/qtdragon will start on buster?

2022-11-11 Thread Phill Carter
> On 11 Nov 2022, at 10:42 pm, gene heskett wrote: > > On 11/11/22 03:58, andy pugh wrote: >> On Fri, 11 Nov 2022 at 07:53, gene heskett wrote: >> No option 'mainwindow_geometry' in section: 'SCREEN_OPTIONS' >> /usr/bin/linuxcnc: line 963: 3628 Segmentation fault $EMCDISPLAY >> -ini

Re: [Emc-developers] Time to split 2.9 and master?

2022-09-22 Thread Phill Carter
> On 23 Sep 2022, at 9:39 am, Rod Webster wrote: > > I think integrators and users don't want to be continually installing new > versions of Plasmac et al. > Plasmac has only ever existed in the development branch. First a private > fork, then 2.8, then 2.9 > There are updates to it on an

Re: [Emc-developers] Time to split 2.9 and master?

2022-09-20 Thread Phill Carter
> On 21 Sep 2022, at 6:59 am, andy pugh wrote: > > Is it time to split 2.9 off as a stable-ish branch with a 2.9.0~pre0 tag? I have some plasmac work that I would like to push before that happens. It should be completed by the end of this month. I also have a question regarding packaging.

Re: [Emc-developers] linuxcnc on raspberry pi bullseye?

2022-09-14 Thread Phill Carter
> On 15 Sep 2022, at 4:53 am, Sebastian Kuzminsky wrote: > > Hi folks, with all the attention that newer distros have been getting > lately, I'm looking in to running LinuxCNC On the Bullseye version of > Raspberry Pi OS (aka Raspbian) on a Raspberry Pi 4B. > > It looks super

Re: [Emc-users] AXIS panel disable

2022-09-08 Thread Phill Carter
Ctrl E should do it, if you have a PyVCP panel then I think that command should show in the Quick Reference page in the Help menu. > On 9 Sep 2022, at 1:19 pm, John Dammeyer wrote: > > Is there a way to dynamically enable/disable the > PYVCP = pyvcp-panel.xml > > The problem is that even

Re: [Emc-developers] cam align

2022-09-04 Thread Phill Carter
FWIW I have tried the /configs/sim/axis/qtvcp/qtvcp_tabs sample on a 64bit Pi4 and it works. raspberrypi:~ $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description:Debian GNU/Linux 11 (bullseye) Release:11 Codename: bullseye raspberrypi:~ $ uname -a

Re: [Emc-developers] Driver changes in a stable branch?

2022-08-30 Thread Phill Carter
>> I have cherry-picked the changes needed to make it work with 2.8.3 in >> the branch "outm_for_2.8" and initial tests by people who actually >> have a 7i86S look promising (I don't have one to test with) > > Does no-one really have any opinion on this? My only concern is that if 7i96s support

Re: [Emc-users] Problem with gantry config

2022-07-30 Thread Phill Carter
> On 31 Jul 2022, at 10:09 am, Leonardo Marsaglia wrote: > > Hi guys, I hope you're all doing well. > > I'm struggling a little bit with the config for the router. I'm attaching > the LCNC report to see if you have any clue about what's preventing LCNC to > start. > > The problem the report

Re: [Emc-developers] OPINION: Setting Cannon's default G64 to something safer

2022-05-31 Thread Phill Carter
> On 1 Jun 2022, at 11:29 am, Chris Morley wrote: > > Forum discussion here: > https://forum.linuxcnc.org/20-g-code/46023-simple-rectangle-has-a-radius-on-all-edges-strange?start=0 > > Gist: > Often users are surprised by linuxcnc's corner rounding with the default > setting of G64. > I

Re: [Emc-users] buildbot apt-key?

2022-03-23 Thread Phill Carter
> On 24 Mar 2022, at 2:19 pm, gene heskett wrote: > > On Wednesday, 23 March 2022 21:48:19 EDT Phill Carter wrote: >>> On 24 Mar 2022, at 12:39 pm, gene heskett >>> wrote:> >>> On Monday, 21 March 2022 21:04:22 EDT andy pugh wrote: >>

Re: [Emc-users] buildbot apt-key?

2022-03-23 Thread Phill Carter
> On 24 Mar 2022, at 12:39 pm, gene heskett wrote: > > On Monday, 21 March 2022 21:04:22 EDT andy pugh wrote: >> On Mon, 21 Mar 2022 at 19:27, gene heskett > wrote: >>> How do I get and install the buildbot's apt-key EF1B07FEE0EE663E ? >> >> Do the instructions on the buildbot page not

Re: [Emc-users] tests hanging?

2022-02-10 Thread Phill Carter
> On 11 Feb 2022, at 5:39 pm, Andy Howell wrote: > > When I run the test suite there are a number of tests that seem to hang. It > could be I am just impatient. For example: > > tests/linuxcncrsh-tcp > > tests/linuxcncrsh > > tests/mdi-queue/oword-queue-buster > > Should I expect all

Re: [Emc-developers] How to contribute?

2022-02-09 Thread Phill Carter
> On 10 Feb 2022, at 4:14 pm, Andy Howell wrote: > > > On 2/9/22 14:46, andy pugh wrote: >> On Wed, 9 Feb 2022 at 20:21, Andy Howell wrote: >> >>> My background is in c/c++ development under UNIX/Linux. I know bit of >>> python. I don't have the experience to work on the low level

Re: [Emc-developers] Buildbot Asleep

2022-01-02 Thread Phill Carter
Haha, me too. :) > On 3 Jan 2022, at 12:15 pm, Sam Sokolik wrote: > > I don't understand why any one or thing would want to stay in 2021.. > > On Sun, Jan 2, 2022, 6:59 PM Phill Carter wrote: > >> Buildbot seems t

[Emc-developers] Buildbot Asleep

2022-01-02 Thread Phill Carter
Buildbot seems to not want to leave 2021. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Dependencies

2021-10-15 Thread Phill Carter
I inadvertently pushed this commit that adds QtVCP dependencies for packaging when I meant to submit it as a PR. Should I undo it then submit as a PR?

Re: [Emc-users] Code of Conduct

2021-07-18 Thread Phill Carter
> On 19 Jul 2021, at 7:13 am, Gene Heskett wrote: > > On Sunday 18 July 2021 16:17:31 Mark Wendt wrote: > >> It's still a topic because the Code is still up. Do you agree with >> everything included in the Code? >> >> Mark > > No Mark, I don't, and the reason has been discussed to death. I am

Re: [Emc-users] AXIS UI Jog Button

2021-07-16 Thread Phill Carter
> On 17 Jul 2021, at 9:59 am, John Dammeyer wrote: > >>> Yes. Keyboard and click on radio button both change so the Tool buttons refer to the correct axis. But Pendants don't seem to have that feature. John >>> >>> If a USB (or in this case a Ps/2) keyboard can do it, then

Re: [Emc-users] four axis foam cutter 2.8 config

2021-07-01 Thread Phill Carter
> On 2 Jul 2021, at 9:03 am, Ralph Stirling > wrote: > > Some developer went to the trouble to add the very nice > FOAM mode to axis, which looks great. There just seems > to be some problem with kinematics that won't drive the > second pair of joints. I've tried changing to joints 6 and 7

Re: [Emc-users] #ifdef

2021-06-17 Thread Phill Carter
ster/lib/hallib/plasmac.tcl ><https://github.com/LinuxCNC/linuxcnc/blob/master/lib/hallib/plasmac.tcl>> > > John > > >> -Original Message- >> From: Phill Carter [mailto:phillcarte...@gmail.com >> <mailto:phillcarte...@gmail.com>] &

Re: [Emc-users] #ifdef

2021-06-16 Thread Phill Carter
t;= hm2_7i92.0.encoder.01.velocity } > I mean I know I need to not use the stepgen velocity feedback to show spindle > velocity because that's now the encoders job but there are a lot of > non-starters at the moment. > > >> -Original Message- >> From: Phill

Re: [Emc-users] #ifdef

2021-06-16 Thread Phill Carter
> On 17 Jun 2021, at 2:03 pm, John Dammeyer wrote: > > Is there something like an > > #ifdef > #else > #endif > > in HAL files? > Thanks > John No, but it is possible to use HALTCL files.

[Emc-developers] Buildot Homepage

2021-06-04 Thread Phill Carter
I have attached an update homepage for the Buildbot. It can be viewed for correctness here: > ___ Emc-developers mailing list

Re: [Emc-developers] linuxcnc-dev dependencies

2021-05-23 Thread Phill Carter
> On 24 May 2021, at 8:19 am, andy pugh wrote: > > Is there a good reason not to have all the build-time dependencies as > dependencies for linuxcnc-dev? This would mean that apt-get install > linuxcnc-dev would install all that is needed to run "make" I don't know but originally I thought

Re: [Emc-developers] Proposal: Stop supporting Py2 and GTK2 in Master.

2021-05-12 Thread Phill Carter
> On 12 May 2021, at 4:28 pm, Chris Morley wrote: > > > On 2021-05-11 11:01 p.m., Phill Carter wrote: >> >>> On 12 May 2021, at 3:47 pm, Chris Morley wrote: >>> >>> I copied this from github (and added to): >>> >>> I don

Re: [Emc-developers] Proposal: Stop supporting Py2 and GTK2 in Master.

2021-05-12 Thread Phill Carter
> On 12 May 2021, at 3:47 pm, Chris Morley wrote: > > I copied this from github (and added to): > > I don't think anyone really thinks we can/should keep supporting py2 in the > future. > The real questions are how/when will we transition - as the transition will > be very disruptive. >

[Emc-developers] Buildbot

2021-03-06 Thread Phill Carter
Buildbot has a lost slave. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] axis speed overrides

2021-02-18 Thread Phill Carter
> On 19 Feb 2021, at 10:45 am, R C wrote: > > Hello, > > > where in axis can I set the range for the "speed overide", or the ranges for > the "overrides" in general? (I want to use it to speed up the process > when using axis for 'simulations')

Re: [Emc-users] Halcompile Quirk

2021-02-01 Thread Phill Carter
> On 2 Feb 2021, at 12:33 pm, andy pugh wrote: > > On Tue, 2 Feb 2021 at 01:17, Phill Carter wrote: > >> It seems to build ok here. > > Good to know. Which OS / kernel / realtime? It is in a VM: (master) buster:~/git/linuxcnc-dev/src $ uname -a Linux buster 4

Re: [Emc-users] Halcompile Quirk

2021-02-01 Thread Phill Carter
> On 2 Feb 2021, at 11:51 am, andy pugh wrote: > > I am not currently able to compile userspace comps in-tree on my dev machine. > > This includes the sample comp on the halcompile manpage (rand.comp) > > I can compile it OK with plain halcompile, but if I put it in the > hal/components

[Emc-developers] Buildbot

2021-01-06 Thread Phill Carter
Buildbot appears to be asleep Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] BuildBot

2020-12-30 Thread Phill Carter
Buildbot seems to have been asleep for a while. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] Version 2.8.1 is released

2020-12-02 Thread Phill Carter
Thanks Andy. > On 3 Dec 2020, at 8:36 am, andy pugh wrote: > > Version 2.8.1 is largely a bugfix release based on 2.8.0. One > exception is the porting back of drivers for Mesa 7i95, 7i97 and 7c80. > > This should be offered as an automatic update on most systems. > > At this time the

Re: [Emc-users] limit switch configuration on lathe in linxcnc (2.7)

2020-11-06 Thread Phill Carter
> > ah, yes, I have not set any soft limits in the new configuration yet. Also > wonder how to do that. > > > For example, I have a mill, also a sherline, without limit switches which I > "return home" every time I am done, and then home the axes when I start. > > I thought I could use the

Re: [Emc-users] troubleshooting 6i25-7i77 mesa cards help please:)

2020-10-14 Thread Phill Carter
> On 14 Oct 2020, at 7:27 pm, Johann Beukes wrote: > > Hi guys > How do I unsubscribe? > I dont use Linuxcnc anymore. Try the lists.sourceforge link at the bottom of the email > > > On Wed, 14 Oct 2020, 10:25 andy pugh, wrote: > >> On Wed, 14 Oct 2020 at 08:24, andrew beck >> wrote: >>>

[Emc-developers] Buildbot

2020-10-10 Thread Phill Carter
Buildbot appers to be be asleep. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] buster xfce4-goodies installed, ought to have a power capable screen blanker.

2020-10-01 Thread Phill Carter
I "think" I installed xfce-power-manager or similar.Cheers, Phill Original message From: Gene Heskett Date: 2/10/20 7:51 am (GMT+10:00) To: emc-users@lists.sourceforge.net Subject: Re: [Emc-users] buster xfce4-goodies installed, ought to have a power capable screen

Re: [Emc-developers] Python3 Master Build

2020-09-22 Thread Phill Carter
s/820 > <https://github.com/LinuxCNC/linuxcnc/issues/820> > > I know mostly that discussion for 2.9 > > On 23/9/20 2:16 pm, Phill Carter wrote: >> I have hit a roadblock trying to build master with python3 >> >> I have a VM created with the 2.8 Buster ISO

[Emc-developers] Python3 Master Build

2020-09-22 Thread Phill Carter
I have hit a roadblock trying to build master with python3 I have a VM created with the 2.8 Buster ISO and changed the default python to python3. When I try to build master I get this in the terminal in the ./configure stage: checking python version... OK checking version of python libraries...

Re: [Emc-developers] Remove PDF Docs? (Was: DEB for linuxcnc HTML documentation)

2020-09-21 Thread Phill Carter
> On 21 Sep 2020, at 7:06 pm, andy pugh wrote: > > On Sun, 20 Sep 2020 at 20:10, Dr. Nikolaus Klepp wrote: >> >> I've made a deb with the HTML documentation of linuxcnc 2.8.0 > > I know that you were not suggesting that we remove the PDF docs, but I > would like to expand the discussion in

Re: [Emc-users] CAD for parts to make on a lathe

2020-09-17 Thread Phill Carter
I got burnt by Alibre some years back with their entry level version. I would never trust them again. Cheers, Phill. > On 18 Sep 2020, at 2:01 pm, Chris Albertson wrote: > > I just checked, the $199 version of Alibre is almost useless. It does not > even have Bolian operations and no CAM.

[Emc-developers] Buildbot Stopped

2020-09-09 Thread Phill Carter
The Buildbot seems to having a lazy lunch. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] LinuxCNC 2.8.0 is released

2020-09-08 Thread Phill Carter
Thank you Andy for all your hard work. > On 9 Sep 2020, at 9:35 am, Sam Sokolik wrote: > > Awesome work everyone! Thank you andy for making it happen! > > On Tue, Sep 8, 2020, 6:31 PM andy pugh wrote: > >> I am pleased (and a little relieved) to announce the release of LinuxCNC >> v2.8.0 >>

Re: [Emc-developers] Buildbot home page

2020-09-08 Thread Phill Carter
Original message From: andy pugh Date: 8/9/20 7:29 pm (GMT+10:00) To: EMC developers Subject: Re: [Emc-developers] Buildbot home page On Sat, 5 Sep 2020 at 04:34, Phill Carter wrote:>> I took the liberty of editing the Buildbot home page to reflect the release

[Emc-developers] Buildbot home page

2020-09-04 Thread Phill Carter
I took the liberty of editing the Buildbot home page to reflect the release of 2.8 It may be previewed here: > Cheers, Phill.

Re: [Emc-users] Interesting GUI

2020-09-04 Thread Phill Carter
> On 5 Sep 2020, at 4:53 am, Mark Wendt wrote: > > On Fri, Sep 4, 2020 at 1:05 PM Chris Albertson > > wrote: > >> On Fri, Sep 4, 2020 at 9:50 AM Mark Wendt wrote: >> >>> On Fri, Sep 4, 2020 at 12:41 PM Chris Albertson < >> albertson.ch...@gmail.com

Re: [Emc-developers] Buster and F-~Engrave / True-Type-Tracer

2020-09-04 Thread Phill Carter
> On 5 Sep 2020, at 4:52 am, andy pugh wrote: > > The Debian Wheezy repository contains a few applications in addition > to LinuxCNC. > Should these also be included in the Debian Buster repository, or are > these abandoned projects? I see F-Engrave is available from Scorchwoks so probably

Re: [Emc-developers] Buildbot problems?

2020-09-01 Thread Phill Carter
> On 1 Sep 2020, at 6:27 pm, andy pugh wrote: > > On Tue, 1 Sep 2020 at 00:52, Phill Carter wrote: > >> Thanks, I forgot to change the install instructions in the PlasmaC manual to >> reflect the change to 2.8 > > The online docs are always the latest, so t

Re: [Emc-developers] Buildbot problems?

2020-08-31 Thread Phill Carter
> On 1 Sep 2020, at 9:48 am, andy pugh wrote: > > On Tue, 1 Sep 2020 at 00:20, Phill Carter wrote: > >> Is it too lateyet to add anything to 2.8? > > Yes. > But I don't think that 2.8.1 will be that long in coming. There is a > lot more Spanish translation

Re: [Emc-developers] Buildbot problems?

2020-08-31 Thread Phill Carter
> On 1 Sep 2020, at 8:38 am, andy pugh wrote: > > On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > >> Four of the builders are failing runtests, but it isn't so much the >> tests that are failing as LinuxCNC itself. > > I have just realised that the three failed builds after my failed >

Re: [Emc-developers] Gmoccapy Lathe Macro Config

2020-08-25 Thread Phill Carter
> On 26 Aug 2020, at 5:43 am, andy pugh wrote: > > One of the sim configs for Gmoccapy includes my lathe macros, which > use a GUI based on a multi-layer SVG file. > This depends on python-rsvg which is not included in Buster. > > I have packported it via the LinuxCNC repo. > > Should I put

Re: [Emc-developers] 2.8.0-pre3

2020-08-25 Thread Phill Carter
> On 25 Aug 2020, at 5:40 pm, andy pugh wrote: > > On Tue, 25 Aug 2020 at 08:31, Phill Carter wrote: > >> Sorry Andy but I really am out of my depth with this. For most of the items >> I don't even know where to begin looking. > > Neither do I. > > --

Re: [Emc-developers] 2.8.0-pre3

2020-08-25 Thread Phill Carter
> On 25 Aug 2020, at 11:04 am, andy pugh wrote: > > On Tue, 25 Aug 2020 at 01:53, Phill Carter wrote: > >>> It seems that the message mentions 3.9.8 because I was looking at the >>> Stretch build, Buster suggests 4.3.0. >>> Does anyone have the time to

Re: [Emc-developers] 2.8.0-pre3

2020-08-24 Thread Phill Carter
> On 25 Aug 2020, at 10:44 am, andy pugh wrote: > > On Tue, 25 Aug 2020 at 01:31, andy pugh wrote: > >> It looks like we can quieten another warning there by changing the >> Standards-Version in control.top.in. >> But is that something you can just do if you don't even know what the >>

[Emc-developers] PREEMPT_RT version string

2020-08-16 Thread Phill Carter
I think it would be worthwhile adding this commit into 2.8 https://github.com/LinuxCNC/linuxcnc/commit/3742a36808198969c6eaba79c0ae92788dcc0aab Cheers, Phill. ___

Re: [Emc-developers] Help!

2020-08-15 Thread Phill Carter
> On 16 Aug 2020, at 9:41 am, andy pugh wrote: > > I am starting to feel that I might have bitten off more than I can chew here. > > Does anyone have any idea why _some_ packages fail and others seem OK? > > http://buildbot.linuxcnc.org/buildbot/grid > > I would like to see green all the

Re: [Emc-developers] 2.8 release update.

2020-08-15 Thread Phill Carter
> On 16 Aug 2020, at 4:22 am, andy pugh wrote: > > On Fri, 14 Aug 2020 at 08:48, Phill C wrote: > >>> Using the terminal on the ISO - I can't right click and paste - anyone else >>> find this? > >> Yep, same here. > > I just tried this and it seems fine. > > Can you confirm _which_ .iso

Re: [Emc-developers] 2.8 release update.

2020-08-14 Thread Phill Carter
The RPi deb seems to have a convoluted name (linux-image-4.19.71-rt24-v7l+_4.19.71-rt24-v7l+-4_armhf.deb) http://linuxcnc.org/dists/buster/base/binary-armhf/ > On 15 Aug 2020, at 9:01 am, Chris Morley wrote: > > installed. > Whatever terminal came default. > Chris > >

Re: [Emc-developers] Confused by Asciidoc

2020-08-12 Thread Phill Carter
> On 12 Aug 2020, at 8:47 pm, andy pugh wrote: > > On Wed, 12 Aug 2020 at 11:22, Phill Carter wrote: > >>> (It seems like the Plasmac guide hasn't actually been translated) >> >> That is embarrassing, I didn't even notice... > > Actually, that see

Re: [Emc-developers] Confused by Asciidoc

2020-08-12 Thread Phill Carter
> On 12 Aug 2020, at 8:47 pm, andy pugh wrote: > > On Wed, 12 Aug 2020 at 11:22, Phill Carter wrote: > >>> (It seems like the Plasmac guide hasn't actually been translated) >> >> That is embarrassing, I didn't even notice... > > Actually, that see

Re: [Emc-developers] Confused by Asciidoc

2020-08-12 Thread Phill Carter
> On 12 Aug 2020, at 8:18 pm, andy pugh wrote: > > On Wed, 12 Aug 2020 at 11:16, Phill Carter wrote: > >> :lang: es >> :toc: >> >> at the top and plasmac-user-guide doesn't > > Hmm, maybe it won't cross-reference to a document in a different la

Re: [Emc-developers] Confused by Asciidoc

2020-08-12 Thread Phill Carter
> On 12 Aug 2020, at 7:57 pm, andy pugh wrote: > > https://github.com/LinuxCNC/linuxcnc/tree/andypugh/spanish_docs > The only thing different I see is that plasma-cnc-primer has: :lang: es :toc: at the top and

Re: [Emc-developers] 2.8 release update.

2020-08-03 Thread Phill Carter
> On 4 Aug 2020, at 8:45 am, andy pugh wrote: > > On Mon, 3 Aug 2020 at 04:51, Phill Carter wrote: > >> They seem to require: >> python-pyqt5 >> python-pyqt5.qsci >> python-pyqt5.qtopengl >> python-pyqt5.qtsvg >> opencv >> >> O

Re: [Emc-developers] 2.8 release update.

2020-08-03 Thread Phill Carter
23:51:17 Phill Carter wrote: > > sudo apt install opencv, could not locate opencv on raspbian 10.4 for > armhf. > > raspbian for armhf isn't using x11, but wayland, so my tools to search > are limited to aptitude But thats using tactical nukes without warning > labels. And i

Re: [Emc-developers] 2.8 release update.

2020-08-02 Thread Phill Carter
I tried the ISO and it installed fine on a VM. I did notice the qtvcp sims don't run out of the box, they require some packages and their dependencies. I was able to start them all after the following were installed. They seem to require: python-pyqt5 python-pyqt5.qsci python-pyqt5.qtopengl

Re: [Emc-users] Jerky jog in new 2.8 and 2.9 but not old 2.8 (onscreen buttons + mouse OK but not keyboard)

2020-07-07 Thread Phill Carter
This post on the forum seemed to solve a similar issue. > On 8 Jul 2020, at 8:21 am, Gene Heskett wrote: > > On Tuesday 07 July 2020 17:25:21 andy pugh wrote: > >> On

[Emc-developers] Buildbot

2020-07-05 Thread Phill Carter
The package builds for 2.8 Buster Rpi4 are failing. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] Controlling a model airplane servo with LinuxCNC

2020-06-27 Thread Phill Carter
> On 27 Jun 2020, at 5:26 pm, Gene Heskett wrote: > > On Saturday 27 June 2020 03:10:46 Chris Albertson wrote: > >> I figured this would be easy and I was right. >> >> The HAL and INI files are produced by Stepconf with no edits. I >> connect a cheap $5 hobby servo motor to the parallel

[Emc-developers] Buildbot

2020-06-23 Thread Phill Carter
Buildbot appears to have stopped. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] 2.8 Situation

2020-06-14 Thread Phill Carter
If an individual or a business wants to contract a developer to do work for them then I don't see a problem with that. They can then choose whether or not they would like to contribute that back to the LinuxCNC project although it would be preferable if they did so. I don't think that LinxCNC

Re: [Emc-developers] 2.8 Situation

2020-06-10 Thread Phill Carter
> On 11 Jun 2020, at 12:54 pm, Rod Webster wrote: > >> On Thu, 11 Jun 2020 at 12:33, Reinhard >> wrote: >> >> If other users have similar experiences, then a lot of precious developer >> time >> has been wasted on releases, that don't have much importance. >> I believe, that developer

Re: [Emc-developers] 2.8 Situation

2020-06-09 Thread Phill Carter
How many are deterred from trying linuxcnc because its so dated? I didn't realize we into looking at it from a marketing angle and 2.8 is not dated and is easy to get. > On 10 Jun 2020, at 8:35 am, Rod Webster wrote: > > We have at > least one manufacturer wanting to adopt it. Well maybe

Re: [Emc-developers] 2.8 Situation

2020-06-09 Thread Phill Carter
I don't really understand the need to rush it out right now. I know it has been a long time coming but if it seems this bug can be fixed in the foreseeable future we may as well wait a bit longer. If folk need 2.8 it is really not too difficult to get. > On 10 Jun 2020, at 8:35 am, Rod

[Emc-developers] Buildbot

2020-05-28 Thread Phill Carter
The Buildbot appears to be hung. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot

2020-05-17 Thread Phill Carter
Buildbot seems to be down Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-users] Hal file naming conventions

2020-05-13 Thread Phill Carter
> On 14 May 2020, at 2:39 pm, David Berndt wrote: > > Wondering if anyone cares to share with me a useful naming convention for > your signals? Do you also use the name parameters to name your components or > do you just stick with and2.0 thru and2.x? FWIW I try to give components a name

Re: [Emc-developers] linuxcnc on the rpi4, kernel Q

2020-05-07 Thread Phill Carter
uname: Linux pi4 4.19.97-v7l+ #1294 SMP Thu Jan 30 13:21:14 GMT 2020 armv7l GNU/Linux From  http://buildbot.linuxcnc.org/buildbot/builders/1650.rip-buster-rtpreempt-rpi4/builds/169/steps/environment-report/logs/stdio Original message From: andy pugh Date: 7/5/20 10:16 pm

Re: [Emc-developers] Third-Party GUIs

2020-05-02 Thread Phill Carter
> On 2 May 2020, at 8:13 pm, andy pugh wrote: > > On Sat, 2 May 2020 at 10:15, Phill Carter wrote: > >> I really don't see a problem with having the UI's as part of LinuxCNC > > Many folk already complain that LinuxCNC is too difficult to set up. I > think that

Re: [Emc-developers] Third-Party GUIs

2020-05-02 Thread Phill Carter
> On 2 May 2020, at 5:32 pm, Reinhard wrote: > > On Samstag, 2. Mai 2020, 08:22:05 CEST Jared McLaughlin wrote: >> In my opinion, linuxcnc should be more like a distro that >> you install packages on. The UI's should be packages that are not >> maintained by the main development team. > >

Re: [Emc-developers] Third-Party GUIs.

2020-05-01 Thread Phill Carter
> On 2 May 2020, at 9:38 am, andy pugh wrote: > > On Sat, 2 May 2020 at 00:32, Phill Carter wrote: > >> If we link to one site then we may as well link to every known site that has >> a LinuxCNC compatible GUI > > That is what I am proposing, yes. > &g

Re: [Emc-developers] Third-Party GUIs.

2020-05-01 Thread Phill Carter
> On 2 May 2020, at 9:28 am, John Thornton wrote: > > Actually I would just link to the QtPyVCP web site qtpyvcp.com > > JT > If we link to one site then we may as well link to every known site that has a LinuxCNC compatible GUI Cheers, Phill > On 5/1/2020 4:28 PM, Gene Heskett wrote:

  1   2   >