Hi,
I can’t say if other programs use also the wrong byte array encoding. If GDAL
tolerates such encoding it could be because GDAL supports so many formats which
are defining nodata in different ways. Internally GDAL seems to convert nodata
by default into double, but sometimes it must use for
Hi,
You can get the matching versions of the extensions for a released Geoserver
from the same page where you can download Geoserver. In your case for 2.20.4
from http://geoserver.org/release/stable/ and the direct link is
+1
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: gdal-dev Puolesta Even Rouault
Lähetetty: sunnuntai 1. toukokuuta 2022 23.46
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: [gdal-dev] Motion: adopt GDAL 3.4.3 RC2
Hi,
Motion:
Adopt GDAL 3.4.3 RC2 as final 3.4.3 release
Starting
transparency is not perfect where the
fill meets the outline. And when a colored outline is widened it starts to
paint over the label text.
-Jukka-
Lähettäjä: Steve Lime
Lähetetty: perjantai 29. huhtikuuta 2022 17.07
Vastaanottaja: Rahkonen Jukka (MML)
Kopio: Mapserver-Users (mapserver-users
Hi,
There is a wish to buffer the labelpoly in
https://gis.stackexchange.com/questions/429779/mapserver-background-buffer-around-labels-geomtransform-labelpoly
but it does not seem to be supported directly. Can anybody suggest a trick or
workaround?
-Jukka Rahkonen-
Hi,
I noticed this question in gis.stacexchange
https://gis.stackexchange.com/questions/429896/how-to-not-generate-png-aux-xml-files-when-using-gdal2tiles.
The current gdal2tiles.py really seems to write the aux.xml files except for
the base tiles. I wonder if it is necessary and if there is
+1 for both GSIP-311 and GSIP-312.
-Jukka Rahkonen-
Lähettäjä: Niels Charlier via Geoserver-devel
Lähetetty: torstai 21. huhtikuuta 2022 12.01
Vastaanottaja: Jody Garnett
Kopio: Geoserver-devel
Aihe: Re: [Geoserver-devel] proposals: promote metadata and csw-iso to
extensions
Hello
Hi,
Mapserver 8 has increased security and requires a special config file. The best
link for the documentation at the moment is probably
https://mapserver.org/development/rfc/ms-rfc-135.html (The message "See
mapserver.org/config_file.html for more information" points to non-existing
Hi,
I have seen those http 500 errors but I do not remember in what circumstances.
What I do remember is that I was awaiting for some other message that I was
used to see and getting past the 500 error required prior knowledge about what
might be wrong. Not very useful but at least you know
+1
-Jukka Rahkonen-
Lähettäjä: Andrea Aime
Lähetetty: perjantai 1. huhtikuuta 2022 17.06
Vastaanottaja: GeoServer
Aihe: [Geoserver-devel] GSIP 210: graduate KML-PPIO to extension
Hi all,
I've prepared a GSIP to graduate the KML-PPIO module based on our discussion
during the last PSC meeting,
Hi,
I would like to inform that you did write mail to the right place even you have
not received any answers yet. Unfortunately your question is too specific for
most GDAL users and capable developers are very busy as you can see from the
GitHub activity. Let's still hope that somebody reacts.
the standard.
Let's see if there is a workaround or any configuration steps to overcome this
issue...
On Mon, 4 Apr 2022 at 11:35, Rahkonen Jukka (MML)
mailto:jukka.rahko...@maanmittauslaitos.fi>>
wrote:
Hi,
By what reference the version is optional? I had a look at the “Styled Layer
Desc
Hi,
By what reference the version is optional? I had a look at the “Styled Layer
Descriptor profile of the Web Map Service Implementation Specification” and
there, in Table 9 —GetLegendGraphic operation request URL parameters the WMS
version is defined to be mandatory.
GetLegendGraphics works
believe I used the WFS connectiontype.
-Jukka Rahkonen-
Lähettäjä: Lars Fricke mailto:lars.fri...@skendata.de>>
Lähetetty: perjantai 1. huhtikuuta 2022 14.54
Vastaanottaja: Rahkonen Jukka (MML)
mailto:jukka.rahko...@maanmittauslaitos.fi>>;
mapserver-users@lists.osgeo.org<mailto:
+0
-Jukka Rahkonen-
Lähettäjä: Marco Volpini
Lähetetty: torstai 31. maaliskuuta 2022 18.57
Vastaanottaja: GeoServer
Aihe: [Geoserver-devel] Early backport of [GEOS-10434] Externalized GeoServer
environment properties
Dear all,
I'm writing to ask early backport permission of
. maaliskuuta 2022 23.02
Vastaanottaja: Rahkonen Jukka (MML)
Kopio: geoserver-users@lists.sourceforge.net; erhhung.y...@mobileye.com
Aihe: Re: GeoServer community support improvements
Hi Jukka,
Just wanted to give my 2 cents on improvements to the support system since
you're asking for them and I
Hi,
I can confirm with GDAL 3.5.0dev from gisinternals and with a normal RGB
ortoimage.
gdalbuildvrt test.vrt p4433h.tif -b 2
0...10...20...30...40...50...60...70...80...90...100 - done.
ERROR 5: p4433h.tif: GDALDataset::GetRasterBand(2) - Illegal band #
With -b 1 -b 2 the command runs fine.
Hi,
Unfortunately I cannot help with LDAP but I would be interested in another
issue that you faced: "took me 2 hours to figure out this support system".
Two hours for that is too long a time and I would like to know how did you
spend it. We are probably blind to guess where new users try to
Hi,
See the answer in
https://gis.stackexchange.com/questions/380677/wfs-getfeature-with-propertyname-get-response-without-geometry
about how to select just certain properties. Unfortunately the demo server at
GIS Solutions seems to be down. But if all the properties are mandatory (check
with
Hi,
See this question
https://gis.stackexchange.com/questions/426418/create-rectified-geotiff-given-aux-xml-produced-from-arcgis?
The GeoTIFF driver documentation
https://gdal.org/drivers/raster/gtiff.html#georeferencing says about the order
in which the georeferencing is searched "By
Hi,
I have been wondering for a long time why orginfo is using backtics/backquotes
in the output. In this example before "foo" and "ESRI"
ogrinfo foo.shp
INFO: Open of `foo.shp'
using driver `ESRI Shapefile' successful.
Not so big problem but in markup the backtick means the
+1
-Jukka Rahkonen-
Lähettäjä: MapServer-dev Puolesta Seth G
Lähetetty: lauantai 19. maaliskuuta 2022 10.40
Vastaanottaja: Steve Lime
Kopio: Bruno Friedmann
Aihe: Re: [mapserver-dev] MapServer 8.0 Beta Release?
Hi all,
I've been working with a build from main on dev servers for a couple of
+1
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: gdal-dev Puolesta Even Rouault
Lähetetty: torstai 10. maaliskuuta 2022 9.42
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: [gdal-dev] Motion: promote GDAL 3.4.2 RC2
Hi,
Motion:
Adopt GDAL 3.4.2 RC2 as final 3.4.2 release
Starting
Hi,
WCS 2.x supports GeoTIFF compression with parameter
GEOTIFF:COMPRESSION:compression. It may not be so well documented in our own
documents but you can have a look at the standard (I think it is in OGC® GML
Application Schema - Coverages - GeoTIFF Coverage
Encoding Profile). Mapserver
Hi,
If you have a table with multi-column primary key (composite key) then the
target table in Spatialite obviously will not have the same PK. I would guess
that none of the columns in the composite is unique and usable as PK so the
only possibility is to create a new unique column for the PK.
Hi,
This release note links works for me now without login. Have you/they changed
something?
https://osgeo-org.atlassian.net/jira/secure/ReleaseNote.jspa?projectId=1=16838
2.21-RC works as well
https://osgeo-org.atlassian.net/jira/secure/ReleaseNote.jspa?projectId=1=16829
I noticed
Hi,
There is nobody who can take the responsibility to say that it is OK to use an
unmaintained version of GDAL. Of course it was the best version with least bugs
ever when it was released but it was 4 years ago. You can browse through the
release notes of all the subsequent GDAL 3.x versions
Hi,
Have you tried to use two filled circle symbols for making the outline effect,
one below and the other one above? Or to use png image as a symbol?
-Jukka Rahkonen-
Lähettäjä: MapServer-users Puolesta
Kyle Qian
Lähetetty: lauantai 26. helmikuuta 2022 1.58
Vastaanottaja: Jason Snyder
not want to install
Geoserver as a Windows service and b) Windows service installation was broken
anyway.
User who wants to switch between Geoserver versions must remember to check the
environment variables.
-Jukka-
Lähettäjä: Rahkonen Jukka (MML)
Lähetetty: torstai 24. helmikuuta 2022 21.16
who has some problem is
using. I think it has been working well. Is there something new in this
Deployment monitor thing?
-Jukka Rahkonen-
Lähettäjä: Jody Garnett
Lähetetty: torstai 24. helmikuuta 2022 20.06
Vastaanottaja: Rahkonen Jukka (MML)
Kopio: GeoServer
Aihe: Re: [Geoserver-devel
Hi,
I tried bin-zip on Windows 10 with OpenJDK 11. I did not notice any trouble.
However, the welcome page shows ”This GeoServer instance is running version
2.20-RC. For more information please contact the administrator” and 2.20-RC
appears also in Server Status – Modules page.
-Jukka
Hi,
It was sluggish last week and still is, I guess that especially with multi-band
images https://lists.osgeo.org/pipermail/gdal-dev/2022-February/055474.html.
Run the command with “ -- debug on” and you have more to follow when you see
how Flushing dirty blocks is slowly progressing.
-Jukka
Hi,
There might be some people providing training and help with configuration etc.
who has subscribed only to the users list, what do you think?
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: MapServer-dev Puolesta Jeff
McKenna
Lähetetty: tiistai 22. helmikuuta 2022 17.59
Now I would like to suggest you timeseries with imagemosaic
https://geoserver-pdf.readthedocs.io/en/latest/tutorials/imagemosaic_timeseries/imagemosaic_timeseries.html
-Jukka-
Lähettäjä: Filipe Silva
Lähetetty: maanantai 21. helmikuuta 2022 17.26
Vastaanottaja: Rahkonen Jukka (MML)
Kopio
: Rahkonen Jukka (MML)
Lähetetty: maanantai 21. helmikuuta 2022 16.27
Vastaanottaja: Filipe Silva ; geoserver-users
Aihe: Re: [Geoserver-users] Multiple Tiff files inside same folder
Hi,
Mosaic is for you. You can see it in action in the demo layer nurc:mosaic and
the multiple source images you can
Hi,
Mosaic is for you. You can see it in action in the demo layer nurc:mosaic and
the multiple source images you can find from \data_dir\coverages\mosaic_sample
-Jukka Rahkonen-
Lähettäjä: Filipe Silva
Lähetetty: maanantai 21. helmikuuta 2022 15.23
Vastaanottaja: geoserver-users
Aihe:
Here is my +1 if you happen to need it.
-Jukka Rahkonen-
Lähettäjä: MapServer-dev Puolesta
jbo-...@mailo.com
Lähetetty: maanantai 21. helmikuuta 2022 10.42
Vastaanottaja: MapServer Dev Mailing List
Aihe: Re: [mapserver-dev] MapCache 1.12.0rc1 - feedback
Hi Jeff, hi all,
Since my
: Open() - Open existing dataset.
-Jukka Rahkonen-
Lähettäjä: Lorenzo Di Giacomo
Lähetetty: perjantai 18. helmikuuta 2022 16.24
Vastaanottaja: Even Rouault
Kopio: Rahkonen Jukka (MML) ;
'gdal-dev@lists.osgeo.org' (gdal-dev@lists.osgeo.org)
Aihe: Re: [gdal-dev] Gdal_translate into HDF4 fails
...60...70...80...90...100 - done.
GDAL: Flushing dirty blocks: 0...10...20...30.
-Jukka-
Lähettäjä: Rahkonen Jukka (MML)
Lähetetty: perjantai 18. helmikuuta 2022 14.09
Vastaanottaja: 'gdal-dev@lists.osgeo.org'
Aihe: Gdal_translate into HDF4 fails
Hi,
There is a question about HDF4 in
https
Hi,
There is a question about HDF4 in
https://gis.stackexchange.com/questions/424204/convert-geotiff-to-hdf-using-gdal.
I tried the same with GDAL 3.4.0. With a single band image conversion from
GeoTIFF into HDF4Image succeeds but with a 3 band image not. I am not sure if
it is even supposed
Hi,
I can see that I sent my +1 only to GDAL PSC members, not to the lists.
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: gdal-dev Puolesta Howard Butler
Lähetetty: torstai 17. helmikuuta 2022 18.13
Vastaanottaja: gdal dev
Kopio: GEOS Development List
Aihe: Re: [gdal-dev] GEOS
Hi,
Yes, QuasiMode works again.
The code seems to be in a good shape. The UI shows no warnings any more when
starting with Java 11. In the log there is this one about jaxb in the log
WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by
by "cursor tool scaling fix should be reverted"? the HiDPI-fix
you requested? if so, are you positive that that broke Quasimode? ..ede
On 16.02.2022 20:20, Rahkonen Jukka (MML) wrote:
> Hi,
>
> It is practically impossible to digitize real line and polygons features
> wit
Hi,
It is practically impossible to digitize real line and polygons features
without Quasimode because user cannot pan or zoom while drawing. Selecting pan
or zoom tools interrupts drawing. If making release now feels important the
cursor tool scaling fix should be reverted.
-Jukka Rahkonen-
Hi,
If user means here the one who configures MapServer and writes the mapfiles
then they can get that info from the binary with "mapserv.exe -v".
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: MapServer-dev Puolesta Jeff
McKenna
Lähetetty: keskiviikko 16. helmikuuta 2022 13.27
Hi,
Do you mean the comment line in the WMS and WFS 1.0.0 GetCapabilities that is
not included in WFS 1.1.0, 2.0.0, and WCS.xxx as can be easily tested at
https://demo.mapserver.org/?
I think that the message is useful when trying to help someone else who has
problems and who cannot run
Hi,
I wonder if there could be something in the Accept headers that orginfo is
using. Ogrinfo seems to set headers “Accept: text/plain, application/json” but
GeoJSON is now officially “application/geo+json”. I do not know the hierarchy
of the MIME types and if “json” should include also the
Hi,
Have you tried to use the URL without =TRUE? That vendor option is meant
for clients like OpenLayers so that they can get cacheable tiles from standard
GeoServer WMS
https://geoserver-pdf.readthedocs.io/en/latest/services/wms/vendor.html
That such tiling and metatiling can work the
Hi,
Does http://mydomain:3000/rpc/wod_geojson.json return data if you send it with
browser? Re-run the ogrinfo command with “--debug on” and see if you can
capture the http requests that ogrinfo sends.
-Jukka Rahkonen-
Lähettäjä: gdal-dev Puolesta SIGéal
Lähetetty: maanantai 14. helmikuuta
Hi,
My late +1
By the comparison http://www.java-logging.com/comparison/ I would have liked to
see also a proposal for logback that by the feature table seems to be on the
same line with log4j, but we do not have such proposal.
-Jukka Rahkonen-
Lähettäjä: Jody Garnett
Lähetetty: maanantai
.
-Jukka-
Lähettäjä: Isabel Kiefer
Lähetetty: maanantai 14. helmikuuta 2022 13.08
Vastaanottaja: Rahkonen Jukka (MML) ;
gdal-dev@lists.osgeo.org
Aihe: Re: [gdal-dev] Corrupted geopackage
Hi Jukka,
Yes, exactly, there are only 78 entries in a dump to text file.
In the original .gpkg-file
Hi,
And when you .dump https://www.sqlitetutorial.net/sqlite-dump/ the damaged
table into a text file, do you only get 78 insert entries into it?
-Jukka-
Lähettäjä: Isabel Kiefer
Lähetetty: maanantai 14. helmikuuta 2022 12.53
Vastaanottaja: Rahkonen Jukka (MML)
Kopio: gdal-dev
Hi,
Without being able to see your database it is hard to give more advice that
https://stackoverflow.com/questions/18259692/how-to-recover-a-corrupt-sqlite3-database/18260642
gives. Did you try all of them? Because the problem has something to do with
the spatial index I would have a try be
Hi,
Maybe we should have some banner at http://geoserver.org/ to tell users that we
know that docs site is down and we work on it.
-Jukka Rahkonen-
___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
Hi,
About ows_* from https://www.mapserver.org/ogc/wms_server.html
(Note that each of the metadata below can also be referred to as ‘ows_*’
instead of ‘wms_*’. MapServer tries the ‘wms_*’ metadata first, and if not
found it tries the corresponding ‘ows_*’ name. Using this reduces the amount of
Hi,
Please find attached my trial to translate the OpenKLEM plugin into Finnish.
-Jukka Rahkonen-
jump_fi.properties
Description: jump_fi.properties
___
Jump-pilot-devel mailing list
Jump-pilot-devel@lists.sourceforge.net
Hi,
Named classes appear in the legend and add least with CLASS-KEYIMAGE you can
define the icon for the class.
LAYER
TYPE RASTER
…
CLASS
NAME "TEST"
KEYIMAGE "c:\ms4w_data\legend.png"
…
END
-Jukka Rahkonen-
Lähettäjä: MapServer-users Puolesta
Ahmet Temiz
Lähetetty:
Hi Michaël,
The language files at
https://github.com/openjump-gis/topology-extension/tree/main/src/main/resources/fr/michaelm/jump/plugin/topology/language
may miss some keys, for example qa.CoverageCleanerPlugIn.interpolate-z =
Interpolate Z
-Jukka Rahkonen-
Lähettäjä: Michaud Michael
edgar.sol...@web.de wrote:
> On 03.02.2022 17:16, Rahkonen Jukka (MML) wrote:
>> Hi,
>>
>> With OJ2 Plus snapshot the extra plugins do not show translated UI texts.
>> For >example the topology plugin. The properties files are included in the
>> jar
>&
Hi,
In the geometrytype conversion tools there is an option "multipointfromcoords".
What is the difference to conversion into MultiPoint? I made a test with some
polygons and the result looks the same. Or is this menu item something that
should not be there? I am testing OJ2 from today.
Hi,
With OJ2 Plus snapshot the extra plugins do not show translated UI texts. For
example the topology plugin. The properties files are included in the jar
OpenJUMP-20220203-r5064(b9be2fb)-PLUS\lib\ext\topology-extension-2.0.0.jar\fr\michaelm\jump\plugin\topology\language\
-Jukka Rahkonen-
Hi,
FYI, OpenJUMP project has been turned totally into UTF-8. All the commits are
probably done at 2022-02-03 https://github.com/openjump-gis/openjump/commits by
Edgar Soldin if there happens to be something interesting.
-Jukka Rahkonen-
___
Hi,
With these polygons
POLYGON ((261 419, 400 380, 360 261, 242 260, 261 419))
POLYGON ((403 380, 545 349, 479 209, 361 259, 403 380))
POLYGON ((339 397, 369 465, 542 425, 490 358, 339 397))
topology plugin option Find coverage overlaps in layer creates layer Overlap
size with two features.
Hi,
What is your GDAL version? Check with "gdalinfo --version"
-Jukka Rahkonen-
Lähettäjä: gdal-dev Puolesta Stefan
Blumentrath
Lähetetty: keskiviikko 2. helmikuuta 2022 10.36
Vastaanottaja: gdal-dev
Aihe: [gdal-dev] netCDF with virtual file system (/vsicurl/) not working
Hi,
I have been
Hi,
The LUT processing supports now hand written LUT files and the old GIMP curve
format that GIMP fortunately still can export. However, I wonder how big task
it might be to add a support for some LUT file types like CUBE or CSP which
seem to be more common. They can also be exported from
Hi,
Authkey is a community module and thus not maintained by core developers. It
would be generally rather impossible to keep the documentation of Geoserver
up-to-date with all the odd things that community modules may cause either
individually or when used together with other modules. In an
if I am disoriented.
-Jukka Rahkonen-
Lähettäjä: Francesco Martinelli
Lähetetty: torstai 27. tammikuuta 2022 13.39
Vastaanottaja: Rahkonen Jukka (MML)
Kopio: MapServer Dev List
Aihe: Re: [mapserver-dev] msPostGISLayerWhichShapes() Error : java library set
wrong query
Hi Jukka,
I use
Hi,
Have you considered to change the locale with your own code as first aid? I do
not know how to do that but some desktop application seems to do that with Java
options
rem --- uncomment and change your language/country here to overwrite OS locale
setting ---
set JAVA_OPTS=%JAVA_OPTS%
Hi,
I wonder if it could be related to which locale Java detects on your computer
– Italian (or Finnish) computer -> comma as a separator. Maybe something that
deals around the same thing
https://stackoverflow.com/questions/4713166/decimal-separator-in-numberformat.
-Jukka Rahkonen-
.
-Jukka-
Lähettäjä: thomas bonfort
Lähetetty: keskiviikko 26. tammikuuta 2022 12.19
Vastaanottaja: Rahkonen Jukka (MML)
Kopio: Mapserver-Users (mapserver-users@lists.osgeo.org)
Aihe: Re: [mapserver-users] LUT file too long, what to do?
Hi Jukka,
Unfortunately it's hardcoded:
https://github.com
Hi,
I am trying to adjust satellite image colors with a GIMP curve file but trial
fails because the file is too long
[Wed Jan 26 12:03:52 2022].708000 msDrawRasterLayerLow(sentinel_lut): entering.
[Wed Jan 26 12:03:52 2022].713000 drawGDAL(): Unable to access file. LUT
definition from file
: Rahkonen Jukka (MML)
Kopio: geoserver-users
Aihe: Re: [Geoserver-users] New Transifex synchronisation method
It depends on the language : if the language has some equivalent in ISO-8859-1,
the character will be kept as this. If not, the characters will be U encoded.
So for Finnish, the characters
Hi,
I have not yet quite understood what the synchronizing process is supposed to
do with non-latin1 characters. Are they pushed through something like
native2ascii
https://docs.oracle.com/javase/7/docs/technotes/tools/solaris/native2ascii.html,
so that Finnish word “määrä” would become
+1
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: gdal-dev Puolesta Even Rouault
Lähetetty: keskiviikko 26. tammikuuta 2022 1.34
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: [gdal-dev] Motion: grant github commit rights to Nyall Dawson
Hi,
I'd like to motion to grant github commit
+1
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: gdal-dev Puolesta Even Rouault
Lähetetty: perjantai 21. tammikuuta 2022 12.18
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: [gdal-dev] Motion: adopt RFC 85: Policy regarding substantial code
additions
Hi,
As the discussion seems to
+1
-Jukka Rahkonen-
Lähettäjä: Alessio Fabiani
Lähetetty: tiistai 18. tammikuuta 2022 17.14
Vastaanottaja: Simone Giannecchini
Kopio: GeoServer ; Marco Volpini
Aihe: Re: [Geoserver-devel] GSIP-208 Add the possibility to use fixed values in
Capabilities for Dimension metadata
+1
On Tue,
Hi,
Greg Troxel wrote:
> If that is meant to apply mainly to drivers with proprietary SDKs, it
> looks fine. It's a little hard to tell which things apply to drivers
> that don't have proprietary dependencies.
I think that even drivers with no proprietary dependencies require a thorough
+1
-Jukka Rahkonen-
Lähettäjä: Andrea Aime
Lähetetty: perjantai 14. tammikuuta 2022 20.01
Vastaanottaja: GeoServer
Aihe: Re: [Geoserver-devel] GSIP 207, feature type info customization
Aand PR here: https://github.com/geoserver/geoserver/pull/5587
(with a small demo video)
Cheers
Andrea
Hi,
I can only tell that with these metadata settings in my mapfile
METADATA
"wcs_label""orto_vv" ### required
"wcs_resolution" "0.5 0.5"
"wcs_imagemode" "BYTE"
"wcs_bandcount" "3"
"wcs_band_names" "Band1 Band2 Band3"
an" which appears nowhere in
my map file so I wonder if it's some sort of default baked into the code or
something. (I had seen that before but hadn't bothered to try to figure out
what it was until just now. That's weird.)
Thanks for your help,
carl
On Tue, Jan 11, 2022 a
Hi,
WCS users are supposed to read the metadata with DescribeCoverage, for example
https://avoin-visukuva.nls.fi/ortokuvat-ja-korkeusmallit/wcs/v1?service=WCS=2.0.1=DescribeCoverage=ortokuva_vari
The units can be configured in the mapfile with “wcs_band_uom”. I do not know
if it is possible to
Hi,
I downloaded 2.15.1, unzipped and run startup.bat with Eclipse
Adoptium\jdk-11.0.13.8-hotspot\ and Geoserver started for me as usual.
I am not sure what is the best method for changing the Jetty port but editing
the star.ini file did not work for me. By adding -Djetty.http.port=8090 into
Hi,
The more or less same question seems to be asked some time ago in
gis.stackexchange
https://gis.stackexchange.com/questions/420378/can-we-construct-wkt2-from-proj4string-correctly.
-Jukka Rahkonen-
Lähettäjä: gdal-dev Puolesta Felipe Matas
via gdal-dev
Lähetetty: maanantai 10.
already try to run ogr2ogr with -unsetFid?
-Jukka Rahkonen-
Lähettäjä: Kopszak Marta - Partner Hurt
Lähetetty: maanantai 10. tammikuuta 2022 16.09
Vastaanottaja: Rahkonen Jukka (MML) ; Even
Rouault ; gdal-dev@lists.osgeo.org
Aihe: RE: [gdal-dev] Bug in OGR library
I think a single record wouldn't
at to your mail.
-Jukka Rahkonen-
Lähettäjä: Kopszak Marta - Partner Hurt
Lähetetty: maanantai 10. tammikuuta 2022 15.07
Vastaanottaja: Rahkonen Jukka (MML) ; Even
Rouault ; gdal-dev@lists.osgeo.org
Aihe: RE: [gdal-dev] Bug in OGR library
I have 2 bilions of rows in the whole database
Hi,
Could you clarify a bit? You have billion rows in the database table but xlsx
and ods can support at maximum a bit more than one million rows (1,048,576).
You can’t imagine to have success with converting the whole table. Or is your
problem that you can’t write even a single row from the
Hi,
Excel xlsx format supports at maximum 1,048,576 rows by 16,384 columns
https://support.microsoft.com/en-us/office/excel-specifications-and-limits-1672b34d-7043-467e-8e27-269d656771c3.
Do your data fit within these limits?
-Jukka Rahkonen-
Lähettäjä: gdal-dev Puolesta Kopszak Marta -
+1
-Jukka Rahkonen-
Lähettäjä: Andrea Aime
Lähetetty: tiistai 4. tammikuuta 2022 16.14
Vastaanottaja: Torben Barsballe
Kopio: GeoServer
Aihe: Re: [Geoserver-devel] GSIP-206 Promote GeoPackage to extension
And +1 here too
Cheers
Andrea
On Tue, Jan 4, 2022 at 12:04 AM Torben Barsballe
+1
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: gdal-dev Puolesta Even Rouault
Lähetetty: torstai 30. joulukuuta 2021 11.30
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: [gdal-dev] Motion: promote GDAL 3.4.1 RC1
Hi,
Having heard no issues being reported regarding RC1
Motion:
Hi,
+1, much easier than to play with schema.xsd and offers more features,
especially for non-SQL data sources when a database view is not an option.
Maybe there could be a test button that tests if new names are valid in XML and
if type casts are possible and/or lossless.
-Jukka Rahkonen-
Hi,
At least bin-zip starts on Windows 10 with jre 11 and shows layer preview and
capabilities.
-Jukka Rahkonen-
Lähettäjä: Andrea Aime
Lähetetty: keskiviikko 22. joulukuuta 2021 11.02
Vastaanottaja: GeoServer
Aihe: [Geoserver-devel] GeoServer 2.19.3 release artifacts available on build
Hi,
Find a mail thread with title "Geoserver 2.20.RC generating high CPU load" from
the geoserver-devel mailing list from mid-September 2021, and see the ticket
https://osgeo-org.atlassian.net/browse/GEOS-10243
I believe that you have met by the same issue.
-Jukka Rahkonen-
-Alkuperäinen
. joulukuuta 2021 14.33
Vastaanottaja: jump-pilot-devel@lists.sourceforge.net
Aihe: Re: [JPP-Devel] Cursor hotspot location error with high resolution
hey Jukka,
On 15.12.2021 19:15, Rahkonen Jukka (MML) wrote:
> The digitizing tool (the pen) works now without any additional Windows
> configurations.
i can wing something..
> sunny regards ede
>
> On 15.12.2021 07:53, Rahkonen Jukka (MML) wrote:
>> Hi Ede,
>>
>> This issue happens both with jre8 and jre11. Even jre11 shows the menu
>> texts and tool icons sharper the digitizing pen and other cursor tools
? .. ede
On 14.12.2021 20:27, Rahkonen Jukka (MML) wrote:
> Hi,
>
> I managed to get the digitizing tool usable by adjusting the display settings.
>
> 1. Right click the OpenJUMP.exe icon
> 2. From Compability tab select “Change high DPI settings 3. Select
> High DPI sc
fi-fi/windows-hardware/manufacture/desktop/fixing-blurry-text-in-windows-for-it-professionals?view=windows-11
-Jukka Rahkonen-
Lähettäjä: Rahkonen Jukka (MML)
Lähetetty: maanantai 13. joulukuuta 2021 22.41
Vastaanottaja: jump-pilot-devel@lists.sourceforge.net
Aihe: Cursor hotspot location error with
: tiistai 14. joulukuuta 2021 17.08
Vastaanottaja: Rahkonen Jukka (MML)
Kopio: Zimmer Rene ;
'mapserver-users@lists.osgeo.org'
Aihe: Re: [mapserver-users] security problem?
Uhm - guess not many are using the Mapscript Java-binding then? (I don't, so
haven't tested) https://mapserver.org/ogc
Hi,
Log4j is a Java library, Mapserver is not Java. You can feel safe with this
issue.
-Jukka Rahkonen-
Lähettäjä: MapServer-users Puolesta
Zimmer Rene
Lähetetty: tiistai 14. joulukuuta 2021 15.36
Vastaanottaja: 'mapserver-users@lists.osgeo.org'
Aihe: [mapserver-users] security problem?
Hi,
Please try the unsubscribe link at the bottom of the mailing list info page
https://lists.osgeo.org/mailman/listinfo/gdal-dev.
-Jukka Rahkonen-
Lähettäjä: gdal-dev Puolesta Baker (US),
Anthony W
Lähetetty: torstai 9. joulukuuta 2021 14.02
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: Re:
Hi,
Re-sending to the list without old discussion because the mail body grew too
large and was rejected.
I do not have not much experience about GMLAS but I made a test with this file
https://github.com/aixm/donlon/blob/master/EA_EADD_OBS_DS_AREA_2_3_4_FULL_20191205.xml
and GDAL GMLAS found
1 - 100 of 1866 matches
Mail list logo