Hi,
I am using Asterisk 1.4.25. I have one Broadvoice account. I Integrated
this broadvoice account with Asterisk Server.
I am Able to Make calls but cannot recieve calls. In Incoming calls,
call
lands to
SIP extension, as I attend the callIt gets hungup.
If i dont transfer this
...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of
vijay.go...@alliance-infotech.com
Sent: Thursday, September 10, 2009 12:50 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Asterisk With Broadvoice
Hi,
I am using Asterisk 1.4.25. I have one Broadvoice
Maybe try removing the /301 from your register line and either use
nothing or try /sip.broadvoice.com
vijay.go...@alliance-infotech.com wrote:
Hi,
I am using Asterisk 1.4.25. I have one Broadvoice account. I Integrated
this broadvoice account with Asterisk Server.
I am Able to Make calls
In a 1.2 release of asterisk, I've had no problem connecting to a Broadvoice
SIP peer, to allow routing outgoing calls from Asterisk to Broadvoice. Now,
with the same SIP configuration, I cannot establish the peer. I've enclosed a
SIP log in the hope that someone can help me analyze this
My incoming BV has been intermittant for the last two days as well. It
has gone down somewhere around 4:30 PM Eastern two days in a row, then
been back up in the morning. In the 10:00 AM hour today, it was down for
about ten minutes.
Jason Schafer writes:
I have been trying on and off for a
freebsd 5.4, asterisk-1.0.9_2, broadvoice byod plan.
I can't get this all working together. I followed the instructions on BV
website to the letter and tried every other combination I could think
of, but for incoming calls I only get
BV's message
The party you're trying to reach is busy and can
On Sun, 2005-11-13 at 13:59 -0500, synrat wrote:
freebsd 5.4, asterisk-1.0.9_2, broadvoice byod plan.
I can't get this all working together. I followed the instructions on BV
website to the letter and tried every other combination I could think
of, but for incoming calls I only get
BV's
On Nov 13, 2005, at 1:59 PM, synrat wrote:
freebsd 5.4, asterisk-1.0.9_2, broadvoice byod plan.
I can't get this all working together. I followed the instructions
on BV
website to the letter and tried every other combination I could think
of, but for incoming calls I only get
BV's message
I'm not sure if it matters, but I am running Asterisk 1.0.9. I used the
AAH distribution to do the build.
Jason
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
No incoming voice or incoming calls?
Jason Schafer wrote:
I'm not sure if it matters, but I am running Asterisk 1.0.9. I used the
AAH distribution to do the build.
Jason
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users
Hi:
I am running AAH and setup Broadvoice, but when I call in to the BV
number I cannot send dial commands to my auto attendant or speak if I
use a did to send the inbound calls to a specific extension. I'll
gladly capture an SID debug and place a call, or post any necessary conf
files.
I cannot send dial commands to my auto attendant or speak if I use a did to send the inbound calls to a specific extension
Does asterisk says something in the verbose console?
please post your sip.conf relevant entries for BroadVoice. I have just
cancelled with BroadVoice (too much latency for
Does asterisk says something in the verbose console?
I'm not sure what the verbose console is, but I can run sip debug and
post the output when I make an inbound call.
please post your sip.conf relevant entries for BroadVoice.
[general]
port = 5060 ; Port to bind to (SIP is
I am also a long time client, and have no incoming BV today.
-Darren
From: [EMAIL PROTECTED] on behalf of Jason Schafer
Sent: Mon 9/26/2005 12:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk
I have been trying on and off for a couple of weeks to no avail...
Darren Wright wrote:
I am also a long time client, and have no incoming BV today.
-Darren
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation
Darren Wright wrote:
I am also a long time client, and have no incoming BV today.
-Darren
it works here today but they can be a bit unpredictable
I use a cheap byod lite account mostly as a test tool. I figure if they
grow up someday I might use them more.
I have been wondering if
I'm relatively new to the whole VOIP game, here's what I want to do. I
am using VOIPJet for all of the outbound calls on our AAH box. I have
one landline that I would like to busy forward to an inbound VOIP
number. Broadvoice was recommended to me for price and quality.
Can anyone make a
IMHO - you should not use price and quality in the same sentence for BV.
On Mon, 2005-09-26 at 15:20 -0400, Jason Schafer wrote:
I'm relatively new to the whole VOIP game, here's what I want to do. I
am using VOIPJet for all of the outbound calls on our AAH box. I have
one landline that I
connect.voicepulse.com allows up to 4 calls at a time coming into an
$11/month DID with choice of IAX or SIP
there was discussion here and other places before about broadvoice
allowing the calls but then charging 3.9c a minute for the extra
channels used
shop carefully
Jason Schafer wrote:
This sounds like a winner, are you using voicepulse?
Also, I downloaded the iso for AAH 1.5. Are there any noteworthy bugs
that are fixed? I don't really like to upgrade unless I need to.
Jason
Paul wrote:
connect.voicepulse.com allows up to 4 calls at a time coming into an
$11/month DID
: Re: [Asterisk-Users] Asterisk and Broadvoice, no incoming voice
I'm relatively new to the whole VOIP game, here's what I want to do. I
am using VOIPJet for all of the outbound calls on our AAH box. I have
one landline that I would like to busy forward to an inbound VOIP
number. Broadvoice
Using voicepulse retail account because I need the caller ID name. Maybe
they have added that to connect accounts by now.
Jason Schafer wrote:
This sounds like a winner, are you using voicepulse?
Also, I downloaded the iso for AAH 1.5. Are there any noteworthy bugs
that are fixed? I don't
Did you ever get arounnd this issue? I am seeing the same thing,
On Sun, 13 Mar 2005 00:04:54 +0545, Vicky Shrestha
[EMAIL PROTECTED] wrote:
Thanks,
I have that already in my /etc/hosts
But it's still not working :(
On Saturday 12 March 2005 03:48, Rich Adamson wrote:
For everyone
I never managed to make outgoing calls to broadvoice without the
following patch to the file channels/chan_sip.c
it comes from http://edvina.net/broadvoice/ and it is the only fraction
that it is still needed for outgoing calls.
It does not cause any problems with other sip devices that are
I thought this patch was added into the 1.04 and later source code?
On Mon, 14 Mar 2005 07:24:44 +0200, Dimitris Kounalakis
[EMAIL PROTECTED] wrote:
I never managed to make outgoing calls to broadvoice without the
following patch to the file channels/chan_sip.c
it comes from
Hi,
I tried that but same error
Specially I didn't find people posting about Bad Request or Unknown Dialog
-- Got SIP response 400 Bad request back from 147.135.8.128
-- SIP/5092321848-ccd4 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing
It doesn't try to authenticate the incoming call.
On Friday 11 March 2005 03:56, Randy Johnson wrote:
What does insecure=very do?
Dan Weber wrote:
Here is my sip.conf:
===
register =
[EMAIL PROTECTED]::[EMAIL
Thanks,
I have that already in my /etc/hosts
But it's still not working :(
On Saturday 12 March 2005 03:48, Rich Adamson wrote:
For everyone that's trying to get BV to work, you'all might want to
edit your /etc/hosts file and insert something like:
147.135.8.128 sip.broadvoice.com
This
For everyone that's trying to get BV to work, you'all might want to
edit your /etc/hosts file and insert something like:
147.135.8.128 sip.broadvoice.com
This was a requirement from way back and I've since discontinuted
BV for a different provider, but seems as though of all the suggestions
Hi,
I can't make outgoing calls via Broadvoice. I have tried each and every
configuration that was posted to list previously.
I am able to receive incoming calls fine.
I get the following in asterisk console:
=
asterisk*CLI show version
Here is my sip.conf:
===
register =
[EMAIL PROTECTED]::[EMAIL PROTECTED]/broadvoice
[]
type=peer
user=phone
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
fromuser=
secret=
username=
insecure=very
What does insecure=very do?
Dan Weber wrote:
Here is my sip.conf:
===
register =
[EMAIL PROTECTED]::[EMAIL PROTECTED]/broadvoice
[]
type=peer
user=phone
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
I have configured asterisk with the AMP php configuration utility. I am
able to make outgoing calls through broadvoice but incoming calls are
sent to BV's Voicemail and never actually enter the IVR. When I show
sip debug info through the asterisk prompt it actually reads the
incoming call
- Original Message -
From: [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Thursday, February 24, 2005 10:12 PM
Subject: [Asterisk-Users] Asterisk With Broadvoice
I have configured asterisk with the AMP php configuration utility. I
am able to make outgoing calls through
-Users] Asterisk With Broadvoice
I have configured asterisk with the AMP php configuration utility. I
am able to make outgoing calls through broadvoice but incoming calls
are sent to BV's Voicemail and never actually enter the IVR. When I
show sip debug info through the asterisk prompt
Discussion
Subject: Re: [Asterisk-Users] Asterisk With Broadvoice
OK,
After checking into this, I have found the following:
I can set it up so either incoming or outgoing sip calls on this trunk
work but NOT both. The sip show registry command shows everything as
it should be.
The section from my
@lists.digium.com
Sent: Thursday, February 24, 2005 10:12 PM
Subject: [Asterisk-Users] Asterisk With Broadvoice
I have configured asterisk with the AMP php
configuration utility. I
am able to make outgoing calls through broadvoice but
incoming calls
are sent to BV's Voicemail and never
- Original Message -
From: Robert Webb [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com; [EMAIL PROTECTED]
Sent: Friday, February 25, 2005 2:49 PM
Subject: Re: [Asterisk-Users] Asterisk With Broadvoice
On Fri, 25 Feb 2005 14
: [Asterisk-Users] Asterisk With Broadvoice
On Fri, 25 Feb 2005 14:42:09 +
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
OK,
After checking into this, I have found the following:
I can set it up so either incoming or outgoing sip calls on this
trunk work but NOT both. The sip show registry command shows
- Original Message -
From: [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, February 25, 2005 9:20 AM
Subject: Re: [Asterisk-Users] Asterisk With Broadvoice
Great! It works now!! Thanks so much.
What
, February 25, 2005 9:20 AM
Subject: Re: [Asterisk-Users] Asterisk With Broadvoice
Great! It works now!! Thanks so much.
What was it that made it work? Share the knowledge with the world.
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http
, February 25, 2005 9:42 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk With Broadvoice
OK,
After checking into this, I have found the following:
I can set it up so either incoming or outgoing sip calls on this trunk
work but NOT both. The sip show
On Fri, 25 Feb 2005, James Taylor wrote:
I have two Broadvoice lines and there's three people in the office.
Any way to:
1) Pool the connections for trunking, where any one can get a free
line?
2) Prevent more than 1 simultaneous call per line? (So I will not get
hit for 3.9 cents a
Here are the official instructions from broadvoice for setup of Asterisk.
Other configurations are not supported.
http://foo.robotics.net/mediawiki-1.3.10/index.php/Asterisk_Setup
Dan
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
, February 25, 2005 7:46 PM
Subject: Re: [Asterisk-Users] Asterisk With Broadvoice
On Fri, 25 Feb 2005, James Taylor wrote:
I have two Broadvoice lines and there's three people in the office.
Any way to:
1) Pool the connections for trunking, where any one can get a free
line?
2) Prevent more than 1
Christopher -- regarding the country checking: does your AGI also
check for mobile/cell numbers? Checking for just country codes is
trivial and I do it in the dial plan, but knowing which number is
actually a mobile call is tougher as each country does it differently.
So I'd be interested in a
Hello, I'm using [EMAIL PROTECTED] I'm still new to
Asterisk, and trying to grasp it all.
I'm wanting to do a simple setup of One SIP provider
(Broadvoice) and 3 SIP Software Phones.
I'm able to call the VoIP provided line fine and get
dropped to the digital receptionist (or mailbox).
:[EMAIL PROTECTED] On Behalf Of Terry
Evans
Sent: Saturday, October 23, 2004 4:33 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Asterisk and Broadvoice, no incoming voice
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice
I'm having the same issue, and I'm not behind NAT.
Maybe this is a BV issue?
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Terry
Evans
Sent: Saturday, October 23, 2004 4:33 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users
issue, and I'm not behind NAT.
Maybe this is a BV issue?
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Terry
Evans
Sent: Saturday, October 23, 2004 4:33 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Asterisk
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice. The incoming
connection is fine as it rings my extension from outside, but I can't
hear anyone talking. Outgoing voice is working fine though.
I've been looking through the
On Sat, 23 Oct 2004, Terry Evans wrote:
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice. The incoming
connection is fine as it rings my extension from outside, but I can't
hear anyone talking. Outgoing voice is working fine
It also sounds like some type of NAT issue to me, but I can't figure
out what's going wrong. I changed the RTP ports back to 1-2
and set the router up to forward those, but still no incoming voice.
Kevin suggest I try the two inbound sections in the sip.conf, but I
had already tried them
I'm having the same issue, and I'm not behind NAT.
Maybe this is a BV issue?
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Terry
Evans
Sent: Saturday, October 23, 2004 4:33 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Asterisk
hello is there any info on connecting asterisk to broadvoice?
thanks
hank
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com
55 matches
Mail list logo