direction!
Jim
Jim Pollard, Senior Sysadmin GCUX, GSEC, LPIC, Linux +
The University of Texas at Austin | UT Center for Space Research | 512.232.6966
| j...@csr.utexas.edu
smime.p7s
Description: S/MIME cryptographic signature
___
Bacula
bytes written by
the job?
Thanks for input ya’ll.
Jim
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Thanks very much. Sounds like I’m on the right track.
From: Radosław Korzeniewski
Date: Thursday, September 22, 2022 at 2:08 PM
To: Pollard, Jim
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Is volume retention set only at the creation of the
volume?
Hello,
czw., 22 wrz
I’m asking because I’m working out the correct combination of days I can retain
volumes and # of volumes that can be created before recycling begins. But I
notice that after changing the bacula-dir.conf file all of my current volumes
still have their original Volume Retention set for 90 days
Thanks Bill. Good to know my thought process isn’t crazy.
From: Bill Arlofski via Bacula-users
Date: Thursday, September 22, 2022 at 10:59 AM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] File permissions for bacula-sd /var/backups
On 9/22/22 09:41, Pollard, Jim wrote
of shenanigans am I about to kick
off by chown’ing /var backups to bacula:tape?
Thanks for nudges in the right direction. I’m new with this software.
Jim
Jim Pollard, Senior Sysadmin GCUX, GSEC, LPIC, Linux +
The University of Texas at Austin | UT Center for Space Research | 512.232.6966
| j
I’m S close. I can see there is a tape job waiting for an appendable
Volume. How do I tell which tape slot contains the media that needs to be
changed?
Jim
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https
is determine that
incrementals are missing and initiate fulls. Is that sounding right?
From: Udo Kaune
Date: Thursday, August 25, 2022 at 4:05 PM
To: Pollard, Jim
Subject: Re: [Bacula-users] Silly question from newbie
Am 25.08.22 um 22:52 schrieb Pollard, Jim:
I see. So if my incrementals were daily
, August 25, 2022 at 4:05 PM
To: Pollard, Jim
Subject: Re: [Bacula-users] Silly question from newbie
Am 25.08.22 um 22:52 schrieb Pollard, Jim:
I see. So if my incrementals were daily then I would be able to restore to a
specific day. Otherwise my only options would be the last full, or the last
absolutely sure…
Since I have the fulls and differentials I can dump any incrementals that have
come in between. Correct? By dump I mean purge from the catalog and rm.
Thanks!
Jim
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https
As you can see, nobody except imaginary super admins have been able to load the
S3 plug-in. IT DOES NOT WORK. I implore the community to demand the code &
package be rescinded from the repo until somebody with magical coding prowess
can get it to work. Community users are wasting their time and
.
From: Heitor Faria
Sent: Friday, April 30, 2021 7:09 AM
To: Jim Joyce
Cc: bacula-users
Subject: Re: [Bacula-users] S3 "Driver" Doesn't Work 11.0.2
Hello Jim,
For anyone following this thread, I did compile/install the Bacula hacked libs3
and I'm still gett
ntu/Debian?
From: Heitor Faria
Sent: Thursday, April 29, 2021 7:32 PM
To: Jim Joyce
Cc: bacula-users
Subject: Re: [Bacula-users] S3 "Driver" Doesn't Work 11.0.2
Hello Jim,
Ok, nobody has successfully loaded the S3 Driver. That's what I figured as I
have tried the latest
is zero QA for this so-called
plug-in. Time to start looking for another backup solution.
____
From: Jim Joyce
Sent: Tuesday, April 27, 2021 9:21 PM
To: bacula-users@lists.sourceforge.net
Subject: S3 "Driver" Doesn't Work 11.0.2
Has anyone had success lo
Has anyone had success loading the S3 "Driver" ?? I'm running the latest
version 11.0.2 (Debian Buster) and all I get is "Driver not properly loaded" --
Apr 27 20:59:59 backup bacula-sd[498]: cloud_dev.c:1001 Could not open Cloud
driver type=1 for Device=CloudStorage.
Apr 27 20:59:59 backup
Thank you so much! Hoping the S3 driver actually works now
From: Davide Franco
Sent: Monday, April 26, 2021 8:22 AM
To: Jim Joyce
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Bacula Debs for 11.0.2
Others Debian and Ubuntu packages
Does anybody know why Debs for Bacula 11.0.2 have been recently released for
Debian Jessie and not Buster?? Jessie LTS has been unsupported for close to a
year now. Why would anybody be using Jessie?? Please release for relevant
distros, please!!
___
I have installed Bacula/Baculum on SuSE Linux. I am having trouble whenever
the bconsole is invoked within my browser (Firefox). For example when I go to
label volumes, I specify the parameters in the Label volume(s) window and press
the label control (button).
I get the following in a new
fig issue, an rclone-changer problem or how WHM does it's
brain-damaged built-in backups.
Off topic, but is anybody doing WHM's built-in incremental local backup,
then backing up the files it puts in /backup with bacula?
--jim
___
Bac
No, just a regular update slots. I will try on Tuesday when we swap tapes out
again. Thank you.
Jim Richardson
-Original Message-
From: Wolfgang Denk <w...@denx.de>
Sent: Friday, March 30, 2018 2:12 PM
To: Jim Richardson <j...@securit360.com>
Cc: Bacula &
re:
5: Tape
Select Storage resource (1-5): 5
Enter autochanger slot: 1
3001 Device ""ULT3580" (/dev/nst0)" is doing acquire.
Thank you for your assistance.
Jim Richardson
CONFIDENTIALITY: This email (including any attachments) may contain
confidential, propriet
http://bugs.bacula.org/view.php?id=2354
Thank you,
Jim Richardson
CONFIDENTIALITY: This email (including any attachments) may contain
confidential, proprietary and privileged information, and unauthorized
disclosure or use is prohibited. If you received this email in error, please
notify
I completely understand. The argument from my team is why get notified unless
it is actionable. We do have normal zero byte zero file jobs with incremental
jobs. Some jobs should never be zero/zero. A job directive would be a
reasonable option.
Thanks.
Jim Richardson
From: Kern Sibbald
Kern,
Any chance I can get a feature request in? I would like to have all jobs that
complete with zero files and / or zero bytes to complete with Backup OK - with
warnings. Currently these jobs complete with Backup OK.
Thank you
Jim Richardson
CONFIDENTIALITY: This email (including any
they are associated with.
Thank you in advance.
Jim Richardson
CONFIDENTIALITY: This email (including any attachments) may contain
confidential, proprietary and privileged information, and unauthorized
disclosure or use is prohibited. If you received this email in error, please
notify the sender
text helps with another solution.
Jim Richardson
CISSP CISA
SecurIT360
-Original Message-
From: Bill Arlofski [mailto:waa-bac...@revpol.com]
Sent: Wednesday, October 4, 2017 11:42 AM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Not Receiving Messages for Read-Only f
%e of %c %n\" %r"
mail = al...@somewhere.com = all, !skipped
operator = al...@somewhere.com = mount
console = all, !skipped, !saved
append = "/var/log/bacula/verify.log" = all, !skipped
catalog = all, !skipped, !saved
}
Jim Richardson
CONFIDENTIALITY: This email (includ
Kern you take care of yourself. Get back to us when you are home safe :)
Jim Richardson
From: kern [mailto:k...@sibbald.com]
Sent: Wednesday, September 27, 2017 8:27 PM
To: bacula-users <bacula-users@lists.sourceforge.net>; bacula-devel
<bacula-de...@lists.sourceforge.net>
Subj
Curious, as the script in /usr/libexec/bacula/?
Jim Richardson
From: Nikitin Artem [mailto:artem.niki...@advdigital.ru]
Sent: Monday, September 25, 2017 12:09 PM
To: Jim Richardson <j...@securit360.com>; bacula-users@lists.sourceforge.net;
mar...@de.reuver.org
Subject: RE: [Bacula
Your issue most likely is with SELinux check your audit log.
Sent from my Android phone using TouchDown (www.symantec.com)
-Original Message-
From: Marcel de Reuver [mar...@de.reuver.org]
Received: Monday, 25 Sep 2017, 11:24AM
To: bacula-users@lists.sourceforge.net
vice = /backup/bacula/hourly
Autochanger = yes;
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
Maximum Concurrent Jobs = 1
}
Device {
Thanks Bill, I will keep this in mind as I test.
Jim Richardson
-Original Message-
From: Bill Arlofski [mailto:waa-bac...@revpol.com]
Sent: Saturday, September 2, 2017 2:49 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Bacula Verification Procedures
Hi Jim,
One
/Web/Logs/
Thanks
Jim Richardson
CISSP CISA
SecurIT360
From: Jim Richardson
Sent: Saturday, September 2, 2017 4:37 PM
To: bacula-users@lists.sourceforge.net
Subject: SELinux Issues with Baculum
I am setting up a test environment to plan for my 9.0.3 upgrade. I am having
strange issues
*
postgresql.x86_64 9.2.18-1.el7
@base
Jim Richardson
Vice President of Security Operations
CISSP CISA
SecurIT360
530 Beacon Pkwy W, Suite 901 | Birmingham, AL 35209
O: 205.419.9066 x1010 | P: 205.249.6930 | F: 205.449.1425
the group with my experience.
Jim Richardson
-Original Message-
From: Bill Arlofski [mailto:waa-bac...@revpol.com]
Sent: Thursday, August 31, 2017 10:30 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Bacula Verification Procedures
On 08/30/2017 09:31 PM, Jim Richar
Volume’ option will be sure they are recycled first.
I hope that helps.
Jim Richardson
From: sachin.holikar [mailto:sachin.holi...@gmail.com]
Sent: Wednesday, August 30, 2017 8:18 AM
To: Wanderlei Huttel <wanderleihut...@gmail.com>
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [
-the-host-using-windows-server-backup.aspx
For Vmware ESXi we use the following, again configuring this software to back
up to an NFS share weekly and then putting that on tape for off-site.
http://www.thinware.net/Products/ThinwarevBackup/tabid/202/Default.aspx
Hope this helps.
Jim Richardson
sk after the Restore.
Thank you in advance.
Jim Richardson
CONFIDENTIALITY: This email (including any attachments) may contain
confidential, proprietary and privileged information, and unauthorized
disclosure or use is prohibited. If you received this email in error, please
notify the sender a
the library interface. Is
there a way to have Bacula unmount the drive after jobs are complete to allow
the library to manage its cleaning cycles, or is there something I am missing
in my configuration that may be causing the behavior?
Thank you in advance.
Jim Richardson
CONFIDENTIALITY: This email
RunScript {
RunsWhen=After
RunsOnClient=No
Console = "purge volume action=truncate allpools storage="
}
}
Jim Richardson
CISSP CISA
SecurIT360
From: Dan Langille [mailto:d...@langille.org]
Sent: Tuesday, May 23, 2017 5:55 PM
To: Jim Richardson <j...@securit360.com>
Cc: Wand
= 0
Media Type = LTO-7
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
= /dev/sg5
Drive Index = 0
Spool Directory = /backup/bacula/spool
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c
LabelMedia = yes;
Random Access = Yes;
AutomaticMount = yes;
RemovableMedia = no;
AlwaysOpen = no;
Maximum Concurrent Jobs = 10
}
bacula-fd.conf
FileDaemon { # this is me
Name = bacula-fd
Maximum Concurrent Jobs = 20
}
Jim Richardson
CONFIDENTIALITY: This email
I am using one successfully in a Dell TL1000 tape library. Be sure to use the
latest version of Bacula, factory reset your drive and library when you receive
it, and use the LTO-4 configuration at the bottom of the Bacula-SD.conf
Sent from my Android phone using TouchDown (www.symantec.com)
Wanderlei,
Thank you. This is good work. But, I would certainly hope that there is a
Bacula supported method to accomplish this. If not, I will use your method.
Jim Richardson
From: Wanderlei Huttel [mailto:wanderleihut...@gmail.com]
Sent: Monday, May 22, 2017 5:57 PM
To: Jim Richardson &l
Wanderlei,
I want the detailed volume labels, I don’t want to recycle then, I want them
overwritten, purged, or whatever the terminology is. I do want to keep the
weekly volumes for 14 days and the daily volumes for 2 days.
Jim Richardson
CISSP CISA
SecurIT360
From: Wanderlei Huttel
pool
would solve the problem, but adding it didn't seem to stop the behavior.
Thank you in advance.
Jim Richardson
CONFIDENTIALITY: This email (including any attachments) may contain
confidential, proprietary and privileged information, and unauthorized
disclosure or use is prohibited. If yo
Sibbald [k...@sibbald.com]
Received: Friday, 05 May 2017, 3:59AM
To: Ralf Brinkmann [ralf.brinkm...@wemhoener.de]; Jim Richardson
[j...@securit360.com]; bacula-users@lists.sourceforge.net
[bacula-users@lists.sourceforge.net]
Subject: Re: [Bacula-users] Issues with IBM Labels
I already wrote
Storage” section specifically if you have and
Address value. If you don’t Bacula will bind to 0.0.0.0 if you do it will bind
to that address only
Can you telnet from the client to the IP/Port of the fd?
Can you do it by name telnet gannet 9102 ?
Let me know how that works out.
Jim Richardson
F
ir JobId 114: Volume used once. Marking Volume
"MyService-fd-Daily-111-2017.4.28.bak" as Used.
MyService-fd JobId 114: shell command: run ClientAfterJob "systemctl start
MyService"
bacula-sd JobId 114: Elapsed time=00:00:16, Transfer rate=3.883 M Bytes/second
Jim Richardson
CI
53 bacula-dir JobId 79:
Fatal error: Bad response to RunBeforeNow command: wanted 2000 OK RunBeforeNow
, got 2905 Bad RunBeforeNow command.
27-Apr 18:53 bacula-dir JobId 79: Fatal error: Client " myservice-fd" RunScript
failed.
27-Apr 18:53 bacula-dir JobId 79: Error: Bacula bacula-
= "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
#-- /etc/bacula/bacula-dir.conf
Pool {
Name = Daily_Tapes
Pool Type = Backup
Cleaning Prefix = "CLN"
Recycle = yes
AutoPrune = yes
Volume Retention = 6 days
Recycle Oldest Volume = yes
Label Type = IBM
}
Than
ockSize: 0
DataCompEnabled: yes
DataCompCapable: yes
DataDeCompEnabled: yes
CompType: 0xff
DeCompType: 0xff
BOP: yes
Block Position: 0
Partition 0 Remaining Kbytes: -1
Partition 0 Size in Kbytes: -1
ActivePartition: 0
EarlyWarningSize: 0
NumPartitions: 0
MaxPartitions: 3
Jim Richardson
---
?
Jim Richardson
-Original Message-
From: Alan Brown [mailto:a...@mssl.ucl.ac.uk]
Sent: Friday, March 31, 2017 3:08 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Dell TL1000 IBM3850-HH7
On 30/03/17 10:20, Kern Sibbald wrote:
> Hello Jim,
>
> Thanks for th
Team officially supports it, I won't force it :)
Jim Richardson
-Original Message-
From: Alan Brown [mailto:a...@mssl.ucl.ac.uk]
Sent: Tuesday, March 21, 2017, 2:18 PM
To: Jim Richardson <j...@securit360.com>; Kern Sibbald <k...@sibbald.com>;
bacula-users@lists.sourcef
differently.
I also concur that replacing EIO with EOF/EOT/EOD is just plan dangerous. EIO
is an error for a reason :)
Be in touch.
Jim Richardson
-Original Message-
From: Kern Sibbald [mailto:k...@sibbald.com]
Sent: Monday, March 20, 2017 8:25 AM
To: Jim Richardson <j...@securit
, default of no as it applies this to the FSF
function.
Be in touch.
Referenced Link:
http://bacula.10910.n7.nabble.com/No-EIO-support-on-EOD-read-td75874.html
Jim Richardson
-Original Message-
From: Kern Sibbald [mailto:k...@sibbald.com]
Sent: Sunday, March 19, 2017 5:13 AM
To: Jim
| grep bacula
bacula-libs-sql-7.0.5-7.el7.x86_64
bacula-console-7.0.5-7.el7.x86_64
bacula-director-7.0.5-7.el7.x86_64
bacula-libs-7.0.5-7.el7.x86_64
bacula-storage-7.0.5-7.el7.x86_64
bacula-common-7.0.5-7.el7.x86_64
bacula-client-7.0.5-7.el7.x86_64
Jim Richardson
CISSP CISA
SecurIT360
-Original
forward I will do so Monday and will
report back with results. I am using bacula-7.0.5-7 which looks like it was
packaged for el7 in May of 2015. I will use the SPEC and related files from it
with the latest source and see where things go.
Thank you again
Jim Richardson
-Original Message
/storage/tape/ts2270/specifications.html
Crazy how incestuous our technology manufacturers are.
Jim Richardson
-Original Message-
From: Kern Sibbald [mailto:k...@sibbald.com]
Sent: Friday, March 17, 2017 11:53 AM
To: Jim Richardson <j...@securit360.com>; bacula-users@lists.sourcefor
44 2 xfs,dm_persistent_data
usb_storage66762 3 uas
Jim Richardson
-Original Message-
From: Kern Sibbald [mailto:k...@sibbald.com]
Sent: Friday, March 17, 2017 2:53 AM
To: Jim Richardson <j...@securit360.com>; bacula-users@lists.sourceforge.net
Subject: Re: [Bacula
2 type 1
[7.149489] scsi 1:0:86:1: Attached scsi generic sg3 type 8
[7.149531] sd 1:2:0:0: Attached scsi generic sg4 type 0
[7.149574] sd 1:2:1:0: Attached scsi generic sg5 type 0
[7.149635] scsi 2:0:0:0: Attached scsi generic sg6 type 5
[7.191095] st 1:0:86:0: Attached scsi ta
On May 14, 2014, at 9:52 PM, Bill Arlofski waa-bac...@revpol.com wrote:
On 05/14/14 22:45, Keith T wrote:
Hi there,
It seems to be running job had terminated after 6 days (or running the sixth
HDD) for bacula 5.2.13. I tried several times using a new set HDD but got
same
error while
On May 13, 2014, at 11:18 AM, J. Echter
j.ech...@echter-kuechen-elektro.demailto:j.ech...@echter-kuechen-elektro.de
wrote:
Am 13.05.2014 17:44, schrieb More, Ankush:
Hi,
We are newly installing/configuring bacula-7.0.2 on RHEL 6.3.
Getting below error when configuring.
Need help to resolve.
On Apr 28, 2014, at 2:38 AM,
marcel.van.gereste...@steltix.commailto:marcel.van.gereste...@steltix.com
wrote:
Hi,
I upgraded my bacula 5.2.5 to 7.0.2 i had no compilation errors but the
director is not starting anymore.
It does not log’s anything in the bacula log.
When I run
On Dec 27, 2013, at 11:01 AM, Josh Fisher wrote:
On 12/20/2013 7:10 PM, Levie, Jim wrote:
I have a group of three CentoOS 5.10 boxes and client backups are, well, slow.
The hardware specs are that the systems are all Dell R710's (dual quad
processors w/24GB of memory). The Bacula server
I have a group of three CentoOS 5.10 boxes and client backups are, well, slow.
The hardware specs are that the systems are all Dell R710's (dual quad
processors w/24GB of memory). The Bacula server/storage node has a Dell LT04
Powervault 124T and is an authentication only server (LDAP) for a
That's an Ubuntu problem, not Bacula. Run this:
sudo update-rc.d bacula-fd defaults
--jim
Bacula-fd does not start on ubuntu 12.04 when computer starts on. When
bacula-fd starts it does not write anything in syslog.
How I can see why ?
Normally at started system bacula-fd
.
This won't give you a .dpkg, however. I haven't done much trying to
update Lorenz Schori's Makefile in platforms/osx which does, but I think
that last worked only up to 10.6.
--jim
On 6/07/2012 12:37 PM, comport3 wrote:
Jim, you are truly a life saver! Thank you very, very much!!!
FYI, Debian has just closed this bug today.
Version 175-4 of the udev package will re-enable the sg devices again.
It isn't in Debian testing yet as far as I can see, but I guess will filter
+=/sbin/modprobe -b sg
You you probably put that rule into your own local file underneath the
/etc/udev/rule.d/ directory.
Failing that, manually running '/sbin/modprobe -b sg' at the right time would
probably also do the trick.
Regards,
--
Jim Barber
DDI Health
?
--jim
Yes. It works correctly on the old server with 5.0.2 version.
o_0'
On Thu, Dec 29, 2011 at 11:25 PM, Dan Langille d...@langille.org wrote:
On Dec 29, 2011, at 2:48 PM, John Drescher wrote:
On Thu, Dec 29, 2011 at 2:42 PM, ninyo ninyod...@gmail.com wrote:
Hello
);
Regards,
--
Jim Barber
DDI Health
--
Doing More with Less: The Next Generation Virtual Desktop
What are the key obstacles that have prevented many mid-market businesses
from deploying virtual desktops? How do
it for real.
If all goes bad, you could reinstall your bacula-*-sqlite3 packages again and
import the bacula.sql dump into them to back out.
Although I didn't try this as my conversion worked okay.
Regards,
--
Jim Barber
DDI Health
#!/usr/bin/perl
=head1 DESCRIPTION
This program filters a Bacula
On 18/02/2011 7:28 PM, Dan Langille wrote:
On 2/17/2011 8:49 PM, Jim Barber wrote:
On 17/02/2011 6:54 PM, Torsten Maus wrote:
My idea is that I copy the LAST Full Backups of ALL Clients to Tape.
Hence, since I am not familiar with the SQL commands so well, I am
looking for support from your
Regards,
------
Jim Barber
DDI Health
--
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 securi
For an obscure reason, I need a job to run in certain weeks of the year.
I found the documentation to be unclear, specifically the BNF. I also
didn't see a response to another user's query [1] that was similar to mine.
So, I grabbed the code and read the parser myself. Based on that
reading, I
of volumes that it needs
to read from.
It will then choose a volume not in the read list to be the destination.
Regards,
--
Jim Barber
DDI Health
--
Gaining the trust of online customers is vital for the success
e list of latest full backups at the time it is scheduled
as opposed to when it can run.
I solved this with an admin job to kick off the Copy job rather than
scheduling it directly.
Regards,
--
Jim Barber
DDI Health
-
job
that I run at the end of each week.
That way the OffsiteBackup job doesn't get a chance to run until it is ready
to execute.
Then the SQL selection will execute at the correct time, once the most recent
Virtual Full backups are complete.
Regards,
--
Jim Barber
DDI Health
Jim Barber wrote:
Thanks Martin.
I've compiled and installed version 3.1.6 from a git pull I did on 10th Dec.
I'm not sure if this new version will crash or not.
But I've manually attached a gdb session to it just in case it does.
Thanks.
I'm not having much luck with this.
When I
version 3.1.6 from a git pull I did on 10th Dec.
I'm not sure if this new version will crash or not.
But I've manually attached a gdb session to it just in case it does.
Thanks.
--
Jim Barber
DDI Health
--
Return
is in the PATH and so I'd imagine the program should be able to
find the traceback program.
Any ideas how I can get some useful information from the crash?
--
--
Jim Barber
DDI Health
--
Join us December 9, 2009 for the Red
Thanks Arno.
Is this better?
If so I'll clean out all other text except the feature request and submit it to
bacula-devel
--
Item ?: Allow Schedule Resource to override 'Next Pool'
Date: 18 November 2009
Origin: Jim Barber. jim.bar...@ddihealth.com
Status: New
in 3.0.3 then I guess it is likely to work in the git version as
well...
I'll test various scenarios over the next week or two as I get time and if all
works for me I'll re-submit to bacula-devel with my findings.
Thanks.
--
Jim Barber
DDI Health
in the partition, rather than the whole
partition byte for byte.
Example from the manual:
Include {
Options { signature=MD5; sparse=yes }
File = /dev/hd6
}
Regards,
--
Jim Barber
DDI Health
--
Let
in the library independently.
It is complicated and messy with lots of work arounds for various scenarios.
If the above patch is okay then things become much simpler.
Regards,
--
--
Jim Barber
DDI Health
--
Let
,
--
--
Jim Barber
DDI Health
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application
the status of the director
Console{
Name = vc-mon
Password =
CommandACL = status, .status
}
Thanks,
--
Jim Barber
DDI Health
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30
the media in the
database, only the pool, so I think I might be safe, but just want to double
check.
Thanks,
--
Jim Barber
DDI Health
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
.
Thanks,
--
--
Jim Barber
DDI Health
--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry
be able to override the Next Pool directive somehow for the
Copy job?
Since I'd want off-site tapes to be written to their own tapes separate from
the other on-site backups.
Regards,
--
Jim Barber
DDI Health
Jim Barber wrote:
Hi.
I have just started using Bacula for the first time.
I
not
insert any data into the database? If so, then is my best bet at this
point to bextract from a subset of the remaining eight tapes where I'm
pretty sure the folders I want are located?
thanks!
--jim
!!! stream=14 len=32
bscan: bscan.c:792 Unknown stream type!!! stream=13 len=32768
bscan: bscan.c:792 Unknown stream type!!! stream=13 len=8777
bscan: bscan.c:792 Unknown stream type!!! stream=14 len=32
Thanks!
--jim
Lari Huttunen wrote:
On 12:22:09 2007-07-22 Diky Mulyana [EMAIL PROTECTED] wrote:
does anyone experience this? I installed AVG antivirus, and it caught
Downloader.Zlob.MCQ Trojan horse inside those two installers. Is it
just a false alarm or what?
Could you be a bit more specific?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Arno
Lehmann
Sent: Wednesday, February 07, 2007 8:02 AM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Bacula dir wont start
Hi,
On 1/31/2007 7:02 AM, Jim wrote:
I have no Idea
I have no Idea what might have happened but I can't get the bacula-dir to
start. I have been running bacula for about 6 months now and recently
upgraded my dir and fd's to 2.01 and all was working fine. Yesterday I
reloaded my wife's computer and went to bacula to restore her document
folder, upon
. ERR=The operation completed successfully.
And of course if outlook is running when it gets to my
outlook.pst file it tells me;
Error: Read
error on file C:/Documents and Settings/jim/Local Settings/Application
Data/Microsoft/Outlook/Outlook.pst. ERR=The process cannot access the file
because
Last night my backups all failed,
from the first client to attempt a backup I received this error Fatal error:
c:\cygwin\home\kern\bacula\k\src\win32\filed\../../filed/job.c:1614 Comm error
with SD. bad response to Append Data. ERR=Broken pipe I googled this and
looked through the archives
Subject: Re: [Bacula-users] Help with DVD storage
Hi,
On 9/23/2006 10:37 PM, Jim Peters wrote:
... Anyway this new box also has a DVD+RW drive so I thought I would
experiment with using bacula to write to DVD's , here is my configuration;
...
What have I done wrong or forgot to do at all? I am lost
1 - 100 of 108 matches
Mail list logo
