Niels S. Eliasen nse at ruc.dk writes:
Hi
I have a problem with using Bacual on a NetBSD 2.99 box with a DEC
TLZ10 drive: I'm getting Device busy all the time...
btape -c bacula-sd.conf /dev/nrst0 Tape
block granularity is 1024 bytes.
btape: butil.c:269
Hi,
I have no more idea and my search was not successful.
btape test command will bring my tapes and/or st in an hanging
state.
Here my config I made the latest test:
Device {
Name = Loader_8x12
Media Type = DDS-3
Archive Device = /dev/nst0
AutomaticMount = yes; # when
Hello,
is anybody here which has an running bacula in vmware
virtual machine running on linux installation with
an tape drive?
I have an problem with btape test command.
Thank you for answers.
MfG...
Pierre Bernhardt
tape.
Datacompression is enabled and Blocksize is 0 (auto).
Bacula is release 2.0.2 from debian packages on debian etch (kernel
2.6.18-3-686)
--
MfG...
Pierre Bernhardt
-
Using Tomcat but need to do more? Need to support web
Hello,
I've seen some minutes ago that purging running jobs
is possible. The job will finish with error message:
starflake_test.2007-02-04_09.43.30 Warning: Error getting job record for stats:
sql_get.c:293 No Job found for JobId 7
Possible a bug or a feature ;-)
MfG...
Pierre Bernhardt
Hello,
I have a Libra-8 tape library without an barcode reader.
This have 8 slots.
I want to use one slot defined a cleaning cartrige slot
(slot 8).
As I understand the documention I can use only simulating
barcode by setting labels in mtx-changer on all slots.
But I will use only slot 8 and
Darien Hager schrieb:
On Feb 4, 2007, at 4:12 AM, Pierre Bernhardt wrote:
I have different pools created:
Dailyfor incremental backups
Weekly for differential backups
Monthly for full backups
If a Daily job executes and a full backup must
Hello,
I dont't want to install a comlex postgresql or mysql server.
Is it principle possible to use sqlite instead of using mysql or postgresql?
--
MfG...
Pierre Bernhardt
-
Take Surveys. Earn Cash. Influence
Pierre Bernhardt schrieb:
Hello,
is anybody here which has an running bacula in vmware
virtual machine running on linux installation with
an tape drive?
I have an problem with btape test command.
Thank you for answers.
Hi,
with a pci adaptec 2940 card and a proper configuration
Arno Lehmann schrieb:
Hello,
On 2/4/2007 1:12 PM, Pierre Bernhardt wrote:
Hello,
I have different pools created:
Daily for incremental backups
Weeklyfor differential backups
Monthly for full backups
If a Daily job executes and a full backup
Pierre Bernhardt schrieb:
Hi after some time.
The problem comes from a usb to scsi adapter interface which have
some timing problems under vmware.
I've changed to a adaptec 2940 and now the problem is gone.
MfG...
Pierre Bernhardt
Hi,
I have no more idea and my search was not successful
Kern Sibbald schrieb:
On Sunday 04 February 2007 13:05, Pierre Bernhardt wrote:
Hello,
I've seen some minutes ago that purging running jobs
is possible. The job will finish with error message:
starflake_test.2007-02-04_09.43.30 Warning: Error getting job record for
stats: sql_get.c
:46 spaceetch-dir: No Jobs found to prune.
10-Feb 14:46 spaceetch-dir: Begin pruning Files.
10-Feb 14:46 spaceetch-dir: No Files found to prune.
10-Feb 14:46 spaceetch-dir: End auto prune.
MfG...
Pierre Bernhardt
-
Take
be happening.
Is this supported in Bacula, or is it just easier/better to have a quick
and dirty script run from cron, that uses mtx to load and then unload
the tape???
This is a question which I am ask some days ago, too.
I'm interessted, too.
MfG...
Pierre Bernhardt
in slot.
HP 12000: The drive eject the cartrige and the changer unloads
the cartrige automatically back in the slot (6)
(I'm not reallly shure. didn't use the library any more)
Discussion is welcome :-)
MfG...
Pierre Bernhardt
Michel Meyers schrieb:
On Sat, 17 Feb 2007 21:03:04 +0100, Pierre Bernhardt [EMAIL PROTECTED]
wrote:
Hi,
here the relevant director configuration:
# List of files to be backed up
FileSet {
Name = Full Set
Include {
Options {
signature = SHA1
,
the cleaning job will be start, then next job will be run.
Again I aggree with you: No cleaning procedure if cleaning is not needed.
But if cleaning needed, than in bacula with a job and a dedicated/configured
slot for that is very good.
MfG...
Pierre Bernhardt
Sorry for my bad english
commands should not ignore silently. They should abort
with a error message. I think this should be added in future
releases.
MfG...
Pierre Bernhardt
-
Take Surveys. Earn Cash. Influence the Future of IT
Join
, if the monthly full backup hasn't been run because
of director was down, the full backup will run at next (diff or
increment) schedule!?
Any idea how to implement such a directive?
MfG...
Pierre Bernhardt
-
Take Surveys
Hello,
I dont't want to install a comlex postgresql or mysql server.
Is it principle possible to use sqlite instead of using mysql or postgresql?
--
MfG...
Pierre Bernhardt
-
Take Surveys. Earn Cash. Influence the Future
Darien Hager schrieb:
On Feb 4, 2007, at 4:12 AM, Pierre Bernhardt wrote:
I have different pools created:
Dailyfor incremental backups
Weekly for differential backups
Monthly for full backups
If a Daily job executes and a full backup must
Arno Lehmann schrieb:
Hello,
On 2/4/2007 1:12 PM, Pierre Bernhardt wrote:
Hello,
I have different pools created:
Dailyfor incremental backups
Weekly for differential backups
Monthly for full backups
If a Daily job executes and a full backup
Kern Sibbald schrieb:
On Sunday 04 February 2007 13:05, Pierre Bernhardt wrote:
Hello,
I've seen some minutes ago that purging running jobs
is possible. The job will finish with error message:
starflake_test.2007-02-04_09.43.30 Warning: Error getting job record for
stats: sql_get.c:293
:46 spaceetch-dir: No Jobs found to prune.
10-Feb 14:46 spaceetch-dir: Begin pruning Files.
10-Feb 14:46 spaceetch-dir: No Files found to prune.
10-Feb 14:46 spaceetch-dir: End auto prune.
MfG...
Pierre Bernhardt
-
Take
Pierre Bernhardt schrieb:
Hi after some time.
The problem comes from a usb to scsi adapter interface which have
some timing problems under vmware.
I've changed to a adaptec 2940 and now the problem is gone.
MfG...
Pierre Bernhardt
Hi,
I have no more idea and my search was not successful
Pierre Bernhardt schrieb:
Hello,
is anybody here which has an running bacula in vmware
virtual machine running on linux installation with
an tape drive?
I have an problem with btape test command.
Thank you for answers.
Hi,
with a pci adaptec 2940 card and a proper configuration
Hello,
I dont't want to install a comlex postgresql or mysql server.
Is it principle possible to use sqlite instead of using mysql or postgresql?
--
MfG...
Pierre Bernhardt
-
Take Surveys. Earn Cash. Influence the Future
Hello,
I dont't want to install a comlex postgresql or mysql server.
Is it principle possible to use sqlite instead of using mysql or postgresql?
--
MfG...
Pierre Bernhardt
PS: This is the 3rd time to send these message. Hopefully now it is stored
in news group
/Programme/Internet/GnuPT/GPG/gpg.exe --print-md md5 winbacula-2.0
.3.exe winbacula-2.0.3.exe.sig
winbacula-2.0.3.exe: 0E D2 E6 6F 15 F5 9E 60 DC FB 0A 88 31 E2 71 7F
winbacula-2.0.3.exe.sig: 57 71 4F 53 AE 02 6E BC 5F 5A 14 B8 42 29 6B 90
Check for modification please.
What's wrong?
Pierre Bernhardt
/cert:
eg. cn = [EMAIL PROTECTED]
Further information:
The cn for A. must the same configured in the rules for Address
The cn for B. can be all you want (include the one for A.).
But I'd trouble before I used good identified cn's.
Any questions?
MfG...
Pierre Bernhardt
Kern Sibbald schrieb:
On Sunday 11 March 2007 17:08, Pierre Bernhardt wrote:
Hello,
Hi,
the signature file don't corrospond to the file:
$ /cygdrive/c/Programme/Internet/GnuPT/GPG/gpg.exe -d
winbacula-2.0.3.exe.sig gpg: Signature made 03/01/07 10:03:11 using DSA key
ID 10A792AD
gpg: BAD
Pierre Bernhardt schrieb:
Hello,
the signature file don't corrospond to the file:
$ /cygdrive/c/Programme/Internet/GnuPT/GPG/gpg.exe -d winbacula-2.0.3.exe.sig
gpg: Signature made 03/01/07 10:03:11 using DSA key ID 10A792AD
gpg: BAD signature from Bacula Distribution Verification Key
:-)
MfG...
Pierre Bernhardt
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT business topics through brief surveys
client.
And on every client the fd key is stored so I can recover directly
on the client.
The master key is only used by my if the client key is lost by recover
the whole client.
MfG...
Pierre Bernhardt
-
Take Surveys. Earn Cash
Hello,
I want do delete all the failed Jobs from the job lists.
I've identified all them with the following sql
# 19
:List jobs which have no files in db and are possible failed
SELECT DISTINCT
Job.JobId,Job.Name,ClientId,Job.StartTime,Job.Type,Job.Level,JobFiles,JobBytes,JobStatus
FROM Job
Hello,
is it possible to connect bscan to a postgresql database? I try to scan my tapes
but bscan could not find the bacuala.db which says to me, that bscan do not try
to connect to the postgresql db I given in the command line:
r...@backup:/etc/bacula# bscan -vv -d 99 -c bacula-sd.conf -n
Am 11.08.2010 17:22, schrieb Bruno Friedmann:
On 08/11/2010 04:36 PM, Pierre Bernhardt wrote:
Hello,
is it possible to connect bscan to a postgresql database? I try to scan my
tapes
but bscan could not find the bacuala.db which says to me, that bscan do not
try
to connect
Hello,
I've installed new backups system on same hardware. The old system
was lenny with an bacula 2.x release working well with this drive.
After installing I've tried to test all the tape drives. For my DLT-8000
tape drive in my Library I have no problem registred and the test has
been ended
Am 15.09.2011 10:32, schrieb Pierre Bernhardt:
Hello again,
But for my SuperDLT1 internal tape drive if I start the test the cartrige
will ejects at Append files test and then I got messages the test has
been failed with an, tata, No medium found error.
It looks like at the point the umount
Am 15.09.2011 13:11, schrieb Martin Simmons:
On Thu, 15 Sep 2011 12:10:54 +0200, Pierre Bernhardt said:
Am 15.09.2011 10:32, schrieb Pierre Bernhardt:
Hi,
Does the mt load command pull the tape back into the drive? Bacula expects
the Mount Command to mount the tape.
It's more like
Hello,
the history is I have upgrade from 2.4.x to 5.0.1 step by step incl. the
database.
On 2.4.x I'd run some time the init catalog job for different fd's.
After upgrade I would do that now more like scheduled so I made first an init
catalog
and afterwards directly an Job Level Catalog.
The
Am 09.01.2010 12:31, schrieb Pierre Bernhardt:
PS: I could not find the database model in the documentation but it is
possible
that I've searched the wrong one.
Found them here:
http://www.bacula.org/manuals/en/developers/developers/Database_Tables.html
Cheers...
Pierre
Hello,
I'm migrating my tapes from an older slow drive to a newer one.
I registred much stops of the new drive at the time of migration.
I've not set an Spool Data directive to my migration job configuration.
Is it possible to have an Spool Data directive for migrating jobs?
I'll check that if
is fine. I checked and spooling data is possible in migration jobs.
Thats great and will save my tape drive from often rewinds.
Cheers...
Pierre Bernhardt
--
All the data continuously generated in your IT infrastructure
Hello,
I want to test the stored backups by reading them from the
media, but without storing to a filesystem like a normal
scheduled job. Is this possible?
Cheers...
Pierre Bernhardt
--
Cloud Services Checklist
Am 05.03.2012 15:28, schrieb Kleber l:
2012/3/5 Gael Guilmin gael.guil...@pdgm.com
On 05/03/12 14:00, Gael Guilmin wrote:
I'd like to know if there is a way to allow the use of multi-cores
during a backup and especially for the compression of the data?
Why do you want compression?
No,
Hello,
I think what you mean is a bare metal recovery procedure.
This is generally possible but needs some special preparations and instructions.
It is not a full out of the box recovery procedure.
It depends on how secure you backup you servers.
I've already written a complex base article but
Hello,
Am 15.12.19 um 12:50 schrieb Erik P. Olsen:
> Well, I got nothing out of tcpdump:
>
> dropped privs to tcpdump
> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
> listening on wlp4s0, link-type EN10MB (Ethernet), capture size 262144 bytes
> ^C
> 0 packets
Am 05.12.19 um 13:59 schrieb Erik P. Olsen:
> Yes, ports 9101-9103 are all open.
> Do you have root access like with sudo?
Check on director server:
Check that director is really running:
pgrep -lf bacula-dir
8473 bacula-dir
If running is should be opened 9101
which you can check with netstat:
Hello,
I use on client and server the debian buster packages:
root@server:/etc/bacula# dpkg -l bacula\* |grep ^ii
ii bacula-bscan 9.4.2-2 amd64network
backup service - bscan tool
ii bacula-common9.4.2-2 amd64network
Am 10.03.20 um 09:26 schrieb Pierre Bernhardt:
> (How can I check it which drive index has been used before and since
> 2020 ? Is there a field which shows me the drive index in the db?)
Ok, found a field but it is ever filled by 0:
bacula=> select volumename,deviceid,volbytes from me
Hello,
since beginning of this year a tape issue has been arrived my backups.
All my LTO-4 Tapes will not fill any more to the ~ 760 GiByte than
before. Only ~ 510-580 GiByte will be stored on the tapes which is
shown by the list volume command.
The latest volume with > 720 GiByte has to been
Am 10.03.20 um 20:50 schrieb Pierre Bernhardt:
> Am 10.03.20 um 15:13 schrieb Martin Simmons:
>> On Tue, 10 Mar 2020 09:26:20 +0100, Pierre Bernhardt said:
>> Also, you might try using smartctl to get information about error rates from
>> the drive. Something like:
>>
Am 10.03.20 um 20:27 schrieb Pierre Bernhardt:
> Write failed at block 8758373. stat=-1 ERR=Auf dem Gerät ist kein
> Speicherplatz mehr verfügbar
> btape: btape.c:411-0 Volume bytes=565.0 GB. Write rate = 25.08 MB/s
> btape: btape.c:612-0 Wrote 1 EOF to "HP Ultrium 4-1"
&
Hi,
schedule your jobs with prio 10 for parallel running.
schedule a job which starts the copy job with prio >= 11 so it runs after
all prio 10 jobs has been finished which start the copy job.
Hope it will work as expected ;-)
Cheers,
___
Am 03.04.20 um 04:58 schrieb Pierre Bernhardt:
> I cannot see an error. By the way here my JobDefs configuration for my daily
> jobs
> which should work nearly as you expect:
>
> 34 JobDefs {
> 35 Name = "RotateJob"
> 36 Type = Backup
> 37 Level = Inc
Am 06.04.20 um 21:43 schrieb Phil Stracchino:
> On 2020-04-06 14:52, Pierre Bernhardt wrote:
>> Hi,
>>
>> schedule your jobs with prio 10 for parallel running.
>> schedule a job which starts the copy job with prio >= 11 so it runs after
>> all prio 10 jobs ha
Hello,
I did not found a setup so I want to ask, is it possible to
setup a drive so it will used only for read access but never
for write access?
Cheers,
Pierre
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
Am 14.03.20 um 04:46 schrieb Pierre Bernhardt:
> Am 13.03.20 um 08:28 schrieb Pierre Bernhardt:
>> Am 10.03.20 um 20:27 schrieb Pierre Bernhardt:
>>> Write failed at block 8758373. stat=-1 ERR=Auf dem Gerät ist kein
>>> Speicherplatz mehr verfügbar
>>> btape:
Am 13.03.20 um 15:18 schrieb Sebastian Suchanek:
> Am 10.03.2020 um 09:26 schrieb Pierre Bernhardt:
>
>> since beginning of this year a tape issue has been arrived my backups.
>> All my LTO-4 Tapes will not fill any more to the ~ 760 GiByte than
>> before. Only ~ 510-5
Am 13.03.20 um 08:28 schrieb Pierre Bernhardt:
> Am 10.03.20 um 20:27 schrieb Pierre Bernhardt:
>> Write failed at block 8758373. stat=-1 ERR=Auf dem Gerät ist kein
>> Speicherplatz mehr verfügbar
>> btape: btape.c:411-0 Volume bytes=565.0 GB. Write rate = 25.08 MB/s
>>
Am 15.03.20 um 15:53 schrieb Radosław Korzeniewski:
> niedz., 15 mar 2020 o 13:01 Pierre Bernhardt
>> I did not found a setup so I want to ask, is it possible to
>> setup a drive so it will used only for read access but never
>> for write access?
>>
>
> Yes, ab
Am 03.04.20 um 14:19 schrieb Gary R. Schmidt:
> You need to run the Differential, Incremental, and Full jobs at different
> priorities - that reflect how you want things done - and set "Cancel Lower
> Level Duplicate = Yes" and "Allow Mixed Priority = Yes" in them all.
Hi,
that could not be
Am 24.03.20 um 22:39 schrieb Pierre Bernhardt:
>
Today I tried to migrate again the job which uses two disk files.
But now I tried to put both files in one directory (I used my second
bay to mount the DISK017 file) and used a symbolic link:
-rw-rw-r-- 1 bacula tape 972406571008 Mar 24 17
Am 26.03.20 um 14:06 schrieb Josh Fisher:
> On 3/25/2020 3:23 PM, Pierre Bernhardt wrote:
> And what is the Autochanger / Device configurations for the disk storage in
> bacula-sd.conf?
Device {
Name = DiskStorage1
Media Type = Disk
Device Type = File
Archive Device = /media/ba
Am 26.03.20 um 16:48 schrieb Martin Simmons:
> Looks like a bug to me, but a possible workaround is to limit the size of your
Me2. If the short block is correctly identified at writing it should be repeated
or should be finished on the new disk. In both cases the data on the disks
should
be ok.
Am 01.04.20 um 00:25 schrieb Pierre Bernhardt:
> Am 01.04.20 um 00:11 schrieb Pierre Bernhardt:
> So now I restarted again a migration to check the result.
Here the content from the migration job:
The migration back to the tape has now been finshed without problems:
01-Apr 00:19 backup-dir
Hello,
is it possible to execute scripts or commands on a client to e.g. create
snapshots before
backup them? I did not found a description about this feature.
I need to execute a script/command before and after a backup has to been
produced to
create and remove the lvm snapshot.
Cheers,
Am 01.04.20 um 17:41 schrieb Bernie Elbourn:
> Oops...
>
> On 01/04/2020 16:10, Bernie Elbourn wrote:
>> Hi,
>>
>> Oddly, jobs run sequentially as follows rather than duplicates being
>> cancelled:
>>
>> Running Jobs:
>> Console connected at 29-Mar-20 12:36
>> JobId Type Level Files
Am 27.03.20 um 18:26 schrieb Martin Simmons:
Hi,
>> Any idea how I can extract the single data für fileindex 932145 from the
>> disks for comparing?
>> If the short block is only repeated as whole block on the next disk the
>> problem could be fixed
>> by modify the database so the short block
Am 27.03.20 um 21:26 schrieb Pierre Bernhardt:
> Am 27.03.20 um 18:26 schrieb Martin Simmons:
>>> Any idea how I can extract the single data für fileindex 932145 from the
>>> disks for comparing?
>>> If the short block is only repeated as whole block on the ne
Am 30.03.20 um 16:12 schrieb Martin Simmons:
Hello,
> You could try temporarily hacking bacula-sd to report the short block as an
> info message. In src/stored/block.c, change M_ERROR to M_INFO in these lines:
>
> Mmsg4(dev->errmsg, _("[SE0208] Volume data error at %u:%u! Short block
>
Am 31.03.20 um 17:05 schrieb Martin Simmons:
>>>>>> On Tue, 31 Mar 2020 12:40:04 +0200, Pierre Bernhardt said:
>>
>> Am 30.03.20 um 16:12 schrieb Martin Simmons:
>> Hello,
>>
>>
>> I think the return line should be corre
Am 31.03.20 um 22:07 schrieb Pierre Bernhardt:
>> Your change to use M_INFO looks correct, but the block.c:682 message in the
>> log still says "Error:" so you are still running the original code. Did you
>> run "make" and "make install" after
Am 01.04.20 um 00:11 schrieb Pierre Bernhardt:
> In which installed files is block.c and read_records.c used?
> I compiled all but repaced only the bacula-sd files. Maybe the modification
> is located in another file and not in the binary?
Ok, I found the file by using grep:
root@backup
Am 01.04.20 um 15:19 schrieb Martin Simmons:
> Yes, I think 1 is the best solution, but it will not fix existing backups.
>
> Migration could also be changed to allow certain types of error, like restore
> does with the "Restore OK -- with errors" status.
I think to correct the problems on
Am 01.04.20 um 12:37 schrieb Wanderlei Huttel:
> ClientRunBeforeJob - Run In client before backup (single line config)
> ClientRunAfterJob - Run In client after backup (single line config)
> RunScript - (multiples line config)
>
> You can take a look in the Job Resource in manual and look for
Hello,
can you check the tape with high verbosity bscan?
Cheers,
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Am 10.03.20 um 09:26 schrieb Pierre Bernhardt:
> Todo: Check a backup so the drive 2 will be used instead of drive 1.
> Maybe since 2020 the other drive is used.
> (How can I check it which drive index has been used before and since
> 2020 ? Is there a field which shows me the
Am 10.03.20 um 15:13 schrieb Martin Simmons:
>>>>>> On Tue, 10 Mar 2020 09:26:20 +0100, Pierre Bernhardt said:
> I suggest checking the bacula log and the syslog to see what it reports when
> the tape is marked as full.
Thats a problem. I've send only mails in the past. O
Hello,
I try to migrate a bigger job from three tapes to two disks.
I use a USB3-SATA Disk swapping station which have at all the same SCSI-ID
so I can use same /dev-node.
I use a mountpoint /median/baculadisk2
Each Disk has only write rights by root user so the bacula user can only
write on
Hi,
if you want to restore the database best solution from my point of view
is:
1. Clean Database by dropping it,
2. Initialise Database by creating new one
3. Restore latest pg_dump file
4. bscan -m -s of all newer tapes which should fill the database with newer
backups.
Theses are the steps
Am 29.05.20 um 16:03 schrieb Nico De Ranter:
> But I also tried without manually mounting the tape but that didn't work
> either. So I need to mount the tape first and then umount it to unlock it,
> correct?
> I also tried without bacula-sd running (to prevent it from locking the
> drive), but
Am 22.05.20 um 17:24 schrieb Christian Lehmann:
> Hi Pierre,
Hi,
please answer to list, not to me.
> so you think it might be an issue of this specific tape? That is not the
> case as I tested different tapes and it happened anyway. See my last
> response, I attached also some config-files as
Am 06.07.20 um 08:54 schrieb Pierre Bernhardt:
Hello,
> Running 2 jobs with same priority at the same is running well.
> So I used the priority to order the start of the jobs and try to run
> different priority jobs by using "Allowed Mixed Priority = yes" for
> all the rele
Hello,
Running 2 jobs with same priority at the same is running well.
So I used the priority to order the start of the jobs and try to run
different priority jobs by using "Allowed Mixed Priority = yes" for
all the relevant jobs:
# Job definition for rotate
JobDefs {
Name = "RotateJob"
Type
Am 18.06.20 um 05:35 schrieb Ryan Sizemore:
> Device {
> Name = LTO-4
> Media Type = LTO-4
> Archive Device = /dev/nst0
> AutomaticMount = yes;
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Maximum File Size = 10GB
> AutoChanger = yes
> Maximum Spool Size =
> root@pacific:/etc/bacula# ls -lsa /scratch/
> total 28
> 4 drw--- 4 bacula bacula 4096 Jun 18 01:55 .
> 4 drwxr-xr-x 26 root root4096 Jun 18 01:55 ..
> 16 drwx-- 2 root root 16384 Jun 17 19:45 lost+found
> 4 drwxrwxrwx 2 bacula bacula 4096 Jun 18 03:03 spool
>
Maybe
On 20.10.20 19:09, Marcin Haba wrote:
Hi,
I want to purge also only the file information without removing the job and
volume
history.
>>> Here you can find more information about the update command:
>>>
>>> https://www.bacula.org/9.6.x-manuals/en/console/Bacula_Console.html#432
But I cannot
Am 14.06.21 um 09:15 schrieb Pierre Bernhardt:
> I have a bunch of other filenames which are duplicated in filename
> table found. I found also some duplicate names in path table.
> Did I have forgotten any thing?
>
> I fixed it by python script one step by next but this should no
Am 14.06.21 um 16:32 schrieb Martin Simmons:
> Hi Pierre,
>
> I CC'd the list in my reply, but maybe your email filters duplicate
> message-ids? Also, check the options in
> https://lists.sourceforge.net/lists/options/bacula-users to see if you receive
> your own posts to the list.
Thx. Found,
Hello,
I wonder me that the list does not send me my own mail back to me.
You answered directly to me instead to the list so I cannot also answer
to the list so the information will be lost for other people :-(
Am 11.06.21 um 17:47 schrieb Martin Simmons:
> You need to make a special job with
By the way, as already seen in another post, bacula 11 will merge the
filename table to the file table so the problem for new backups could
be allready fixed in this version !?
Am 14.06.21 um 11:43 schrieb Pierre Bernhardt:
> Am 14.06.21 um 09:15 schrieb Pierre Bernhardt:
>> I hav
Hello,
I've found by a verify job that some files looks like not correctly backup.
So my filled /home/pierre/.screenrc is in the bconsole restore menu shown
as empty file with root:root owner instead pierre:pierre and have a 0 unix
epoche timestamp (1.1.70 1:00 am).
I found also a warning
Hello,
I use Debian Buster with Bacula 9.4.2 with latest debian packages on the
related systems.
I want to check the DiskToCatalog and VolumeToCatalog feature to check the
entries in
the database against the files on my disks and on my backup volumes.
By the way I have a job 3-level-jobs
Hello,
the problem is reproducible at my workstation.
1. Start bat
2. Connect to director
3. Open Media view
4. Enable control switch "Expired"
5. Press
Result:
A window with:
"bat: ERROR in medialist/mediaview.cpp:203 Failed ASSERT: fieldlist.size() !=9"
and after pressing OK a "Segmentation
Hello,
any idea how I can get more information why my job is hanging? It looks
like it has started but not all copy the data to the disk.
Both jobs for migration are still running since hours.
I tried also to use data spooling to tmp but then the spool file will be
filled, but never the data
Hello,
I have bacula on debian buster. The configured jobs will start at the estimate
times althoug
the schedules are manually disabled and in bconsole status dir shown no
scheduled jobs.
Only if I disable manually the jobs one by one they will not start.
I don't know why they start after
Am 16.07.21 um 13:42 schrieb Pierre Bernhardt:
It was hard to find the reason, but it looks like on one tape on special
position
the bacula-sd process is waiting for a non-interruptible IO from the drive.
The interesting point is, that it is the penultimate job of the tape.
The situation was so
Hello,
it's looks like an issue which I had from time to time.
I tried to unload the media and reload it. By the way it was really a rare
situation and I could
not trigger it by planned actions.
Maybe it is a good Idea to check also the status of the tapedrive itself e.g by
tapeinfo -f
1 - 100 of 113 matches
Mail list logo
