Re: [beagleboard] Re: Will the webcast "Taking the BeagleBone Cookbook recipes beyond BeagleBone Black" be available?

Register for Jason's Jan 28 webcast: http://www.oreilly.com/pub/e/3639/ Other book promotion webcasts: http://www.oreilly.com/webcasts/ On Sun, Jan 31, 2016 at 12:36 PM, Wally Bkg wrote: > I followed you link and registered, and got redirected to: > > >

Re: [beagleboard] Does apt-get upgrade not update BoneScript?

On Sun, Jan 31, 2016 at 10:42 AM, Wally Bkg wrote: > So you are saying I will still need to stay with the 7.9 image series for > BoneScript for the foreseeable future? or install the 3.8.x based kernel on jessie. > Will the image be 2016-01-31 or something else? I

[beagleboard] Re: Make a backup of contents of one beaglebone black and install said contents on a second BBB

First question, is your system running from an SD card or the eMMC? If running from an SD card, just "clone" or duplicate the card using Windows or Linux tools. If its running from the eMMC (on-board storage). It'll require knowing some Linux commands. For a beginner, I'd suggest

Re: [beagleboard] Re: Will the webcast "Taking the BeagleBone Cookbook recipes beyond BeagleBone Black" be available?

I followed you link and registered, and got redirected to: http://event.on24.com/eventRegistration/console/EventConsoleNG.jsp?uimode=nextgeneration=1107482=1===fhaudio=false=false=false=3FF85FECC68CE9D6CA13256C89404E5A_language_id=en=1000=650=y=134426098=A=106170746=1630698=134426098=launch But

[beagleboard] Read analog inputs BBB running Debian Jessie

I'm new to the beagle bone and am having difficulty reading the output of a thumb joystick. I'm running Debian Jessie 8.2 Linux kernel 4.1.12-ti-r29 I've connected the thumb joystick as follows vcc - p9_32 gnd - p9_34 hor - p9_36 ver - p9_38 i did not connect the pin for the switch because it

Re: [beagleboard] SPI Overlay not changing states BBB 4.1.15-ti-r43 Debian Image 2015-11-12

ls -lh /dev/spi* remember you application was looking for: open("/dev/spidev2.0", O_RDWR) = -1 ENOENT (No such file or directory) so make sure you application has the correct port name.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss

Re: [beagleboard] SPI Overlay not changing states BBB 4.1.15-ti-r43 Debian Image 2015-11-12

I ought to qualify what I am saying here. To be clear this application does not appear to be looking for a spidev2.0. All said I am still not getting a change in state. I had a similar problem with GPIO's yet that went away with the latests updates, this however seems to be sticking. No change.

[beagleboard] PRU signals on expansion headers of X-15?

Hi, is there already an overview available which signals of the PRU(s) are available at the expansion headers of the X-15? Thanks Karl -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard"

Re: [beagleboard] Read analog inputs BBB running Debian Jessie

On Sun, Jan 31, 2016 at 6:58 PM, Robert Nelson wrote: > On Sun, Jan 31, 2016 at 6:43 PM, wrote: >> I'm new to the beagle bone and am having difficulty reading the output of a >> thumb joystick. >> >> I'm running Debian Jessie 8.2 >> Linux kernel

Re: [beagleboard] Read analog inputs BBB running Debian Jessie

On Sun, Jan 31, 2016 at 6:43 PM, wrote: > I'm new to the beagle bone and am having difficulty reading the output of a > thumb joystick. > > I'm running Debian Jessie 8.2 > Linux kernel 4.1.12-ti-r29 > > I've connected the thumb joystick as follows > > vcc - p9_32 > gnd -

[beagleboard] SPI Overlay not changing states BBB 4.1.15-ti-r43 Debian Image 2015-11-12

I am trying to get the SPI bus to work, unfortunately it will not change states. Is there something obvious that I am missing. I believe that this ties into my previous post on strace and is the reason that I cannot my LCD to work. Thanks in advance to those that respond to this post.

Re: [beagleboard] SPI Overlay not changing states BBB 4.1.15-ti-r43 Debian Image 2015-11-12

On Sun, Jan 31, 2016 at 7:22 PM, Dean wrote: > I am trying to get the SPI bus to work, unfortunately it will not change > states. Is there something obvious that I am missing. I believe that this > ties into my previous post on strace and is the reason that I cannot my LCD >

Re: [beagleboard] SPI Overlay not changing states BBB 4.1.15-ti-r43 Debian Image 2015-11-12

root@beaglebone:~# dmesg | grep bone [5.093226] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,000C,2715BBBK0795' [5.100609] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4 [5.168530] bone_capemgr bone_capemgr: slot #0: No cape found [5.228522]

Re: [beagleboard] Newbie, need help with joystick/analog input on BBB running Debian jessie

On Sun, Jan 31, 2016 at 9:11 PM, Caveman wrote: > I attempted to post this question earlier but I don't believe the post > showed up. If it did I apologize for the duplicate post. > > I have a BBB running Debian jessie 8.2 and the linux kernel is > 4.1.12-ti-r29. > > I've

[beagleboard] IVerilog: just for info

I've been meaning to check out iverilog written by Stephen Williams for quite some time. I finally got around to it and thought why not install to the BBB in anticipation of the X15 that should be available soon. I did a git install from git clone git://github.com/steveicarus/ivtest.git The only

Re: [beagleboard] SPI Overlay not changing states BBB 4.1.15-ti-r43 Debian Image 2015-11-12

I did some experiments and see what appears to be serious errors in dmesg. (not experienced in reading these). I boot, and then look at slots: 0: PF -1 1: PF -1 2: PF -1 3: PF -1 4: P-O-L- 0 Override Board Name,00A0,Override Manuf,univ-emmc This is normal. I'm

Re: [beagleboard] SPI Overlay not changing states BBB 4.1.15-ti-r43 Debian Image 2015-11-12

I backed away from the previous application this one is not the same. It appears to be okay ... root@beaglebone:~# ls -lh /dev/spi* crw-rw 1 root spi 153, 0 Jan 27 02:43 /dev/spidev1.0 crw-rw 1 root spi 153, 1 Jan 27 02:43 /dev/spidev1.1 -- For more options, visit

[beagleboard] Newbie, need help with joystick/analog input on BBB running Debian jessie

I attempted to post this question earlier but I don't believe the post showed up. If it did I apologize for the duplicate post. I have a BBB running Debian jessie 8.2 and the linux kernel is 4.1.12-ti-r29. I've connected a thumb joystick as follows vcc - P9_32 gnd - P9_34 hor - P9_36 ver -

Re: [beagleboard] Does apt-get upgrade not update BoneScript?

So you are saying I will still need to stay with the 7.9 image series for BoneScript for the foreseeable future? Will the image be 2016-01-31 or something else? I notice the beagleboard.org/latest-images page was last edited Jan 31, 2016 but the latest 8.3 image is 2016-01-24 and the

[beagleboard] WeatherCape Shell and SQLite scripts.

I wrote Shell and SQLite scripts for the WeatherCape. There is a succinct README file. You can get it at https://github.com/jaltone/WeatherCape Much thanks to Robert C Nelson for exposing the WeatherCape sensor device files. That was the difficult part. This is licensed the same as the BBB,