Hello,
I found that the configure for poppler to enable both qt4 and qt5 seems to
be broken even with the sed fix applied as per the instructions.
Out of shear frustration I deleted the extracted poppler directory and
re-extracted a fresh copy. I created a build directory within it and
typed:
Hello,
I found that the configure for poppler to enable both qt4 and qt5 seems to
be broken even with the sed fix applied as per the instructions.
Out of shear frustration I deleted the extracted poppler directory and
re-extracted a fresh copy. I created a build directory within it and
Em 30-03-2014 12:34, m...@pc-networking-services.com escreveu:
After it created the make files I checked and saw that it had detected
both qt4 and qt5.
I have, with autotools that it detects both qt4 and 5, but only builds
the wrapper for the first one in the path.
I typed make and it
Hello,
When trying to install valgrind from the 3.9.0 tar ball you get the
following error:
checking the GLIBC_VERSION version... unsupported version 2.19
configure: error: Valgrind requires glibc version 2.2 - 2.17
You need to download it from their subversion server as this does compile:
Em 29-03-2014 05:46, m...@pc-networking-services.com escreveu:
Hello,
When trying to install valgrind from the 3.9.0 tar ball you get the
following error:
checking the GLIBC_VERSION version... unsupported version 2.19
configure: error: Valgrind requires glibc version 2.2 - 2.17
You need
Em 29-03-2014 05:46, m...@pc-networking-services.com escreveu:
Hello,
When trying to install valgrind from the 3.9.0 tar ball you get the
following error:
checking the GLIBC_VERSION version... unsupported version 2.19
configure: error: Valgrind requires glibc version 2.2 - 2.17
You need
Hello,
Sadly the applying of the sed to enable both the qt4 and qt5 wrappers
fails at compile time with this:
CXX libpoppler_qt5_la-poppler-link-extractor.lo
CXX libpoppler_qt5_la-poppler-optcontent.lo
In file included from poppler-optcontent.cc:429:0:
poppler-optcontent.moc:12:2:
have Radeon card.
and i have also tried of using Xorg VESA Driver-2.3.3 but still i am not
able to start the Xorg.
hope some one can help me out.
but thanks for your reply --
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http
Hello,
With the npapi sdk there is only three .h files and an index.html page
included in the unpacked archive.
The instructions state to run configure and make install.
I have created the directory that was mentioned as the installation
directory and copied the three header files to there.
On Fri, Mar 28, 2014 at 01:20:04PM +1300, m...@pc-networking-services.com
wrote:
Hello,
With the npapi sdk there is only three .h files and an index.html page
included in the unpacked archive.
The instructions state to run configure and make install.
I have created the directory that
Hello,
On the instruction page there is a slight error. It states:
cmake -DCMAKE_INSTALL_PREFIX=$QTDIR
This should be:
cmake -DCMAKE_INSTALL_PREFIX=$QT4DIR
without the 4 it fails to compile with an error along the lines of
RELATIVE_PATH called with incomplete arguments.
Regards,
Hello,
The same error in the instructions for QJson are present on the
libdbusmenu-qt-0.9.2 page:
cmake -DCMAKE_INSTALL_PREFIX=$QTDIR
should be:
cmake -DCMAKE_INSTALL_PREFIX=$QT4DIR
Regards,
Christopher
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ:
Hello again,
same thing in qca:
./configure --prefix=$QTDIR
should be:
./configure --prefix=$QT4DIR \
Regards,
Christopher.
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
On 03/26/14 21:20, Wayne Blaszczyk wrote:
Hi All,
I'm having trouble building pycairo. I have both Python 2.7 and 3.4
installed.
When executing PYTHON=/usr/bin/python3 ./waf configure --prefix=/usr, I
get the following error:
./options()
Setting top to :
Hi David,
Only one udevd can operate at the same time. No need to do anythingwith
udev. (You can use eudev too, scripts around udev do the logic,udev the
work.)
ok i will not install the Udev given in the BLFS.
Please do install pciutils so we can see type of your VGA hardware.
i have
Hello,
The link to electric fence on the LAME installation page now gives a 404
not found. It can be downloaded from:
https://gnome-build-stage-5.googlecode.com/files/electric-fence_2.1.13-0.1.tar.gz
Regards,
Christopher
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ:
.
Could someone please help me with this as I really do not know what to
do
next.
Regards,
Christopher.
I'm not particularly familiar with java at the moment, but I've
built icedtea-2.4.2 twice - once in October/November, in a general
test, once on 7.5 because I overlooked that the old
space, or filled up /tmp ? Rebuilding gcc seems an extreme
suggestion (unless someone intends using gcc's java to bootstrap
icedtea), so I'm not exactly surprised that it didn't help.
But just to be clear : you can still build both C and C++ packages ?
For me, the pain of scripting java
and
testing.
Do you have the LANG or LC_* environment variables set? I've never
loaded intlfonts and have never had a problem.
Also, you must have a really slow system. For me, twm comes up in about
2 seconds.
-- Bruce
I agree that the intlfonts are not normally needed - I don't usually
intlfonts and have never had a problem.
Also, you must have a really slow system. For me, twm comes up in about
2 seconds.
-- Bruce
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
of the
languages, ran the test suite and tried the java build again with the same
error.
Could someone please help me with this as I really do not know what to do
next.
Regards,
Christopher.
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs
Hello,
When we install xorg following the BLFS_7.5 stable book, when you first
start x using the startx command, it will complain bitterly about the ISO
fonts are lacking and it will NOT correctly bring up twm with the three
windows and clock. (If you installed the clock.)
To solve this issue
On 03/16/2014 02:55 PM, m...@pc-networking-services.com wrote:
Hello,
I have completed the installation of the lfs 7.5 systemd, and have an
interesting and annoying issue.
I have a separate /usr partition and no matter what I have tried, even
though it is LISTED in /etc/fstab it just will
Hello,
I have completed the installation of the lfs 7.5 systemd, and have an
interesting and annoying issue.
I have a separate /usr partition and no matter what I have tried, even
though it is LISTED in /etc/fstab it just will not get mounted at boot
time.
Would creating the intitramfs file
the
instructions,
as it is clear to me that it DOES NOT compile.
I downloaded a version from their git repository at:
git clone git://anongit.kde.org/phonon-vlc
and the EXACT same error occurs.
I have no idea what needs to be added or removed from the CMakeLists.txt
to make this work.
I have
m...@pc-networking-services.com wrote:
Hello,
While I was attempting to compile Gcr-3.10.1 from the stable BLFS-7.5
book
I was not able to do so until I did the following:
XDG_DATA_HOME=/usr/share
export XDG_DATA_HOME
XDG_DATA_DIRS=/usr/share/
export XDG_DATA_DIRS
I do not yet have
instructions are correct, then there is no way that
this package has been tested and known to install as per the instructions,
as it is clear to me that it DOES NOT compile.
I downloaded a version from their git repository at:
git clone git://anongit.kde.org/phonon-vlc
and the EXACT same error
instructions are correct, then there is no way that
this package has been tested and known to install as per the instructions,
as it is clear to me that it DOES NOT compile.
I downloaded a version from their git repository at:
git clone git://anongit.kde.org/phonon-vlc
and the EXACT same error
On Friday 07 March 2014 12:39:31 Pierre Labastie wrote:
For (ii), you can:
- copy an existing LFS/BLFS to a virtual disk (using for example
qemu-img), or
- use qemu-nbd to see a virtual disk as a system disk, and build to that
disk
(you need the nbd kernel module, and the nbd-client
of those that was the actual
problem but the lack of the XDG search paths.
My apologies if all but me knew to set these, but when following a written
guide line, it would be nice if those of us who do not deviate from it,
can get something to install as per the instructions.
Regards,
Christopher
Hello,
On the VLC page, under Optional mux/demux plugins there is a dependancy
for libebml. If you download the source code from the provided link it
does not compile. You need to get it from the git hub:
https://github.com/Matroska-Org/libebml.git
Also it may well pay to take a look at the
'
.
.
I am trying to understand this better, and have found that configure
and
configure.ac have mentions to lsb_release. I am trying to understand
if
it is a required, recommended or optional dependency. However, in one
machine I do not have it installed and it gives me linux-gnu
message.
I do not know enough about the substitution strings in sed to know if by
chaning the / to another character if it would actually in an unknown way
create errors down the track if compilation was successful. It would seem
to me that no one has actually followed the printed instructions
m...@pc-networking-services.com wrote:
Hello,
This is my second attempt to post this here. I beat the confirmation
e-mail by posting to the list and receieve the bounce that it was
waiting
the list moderators approval and that was on the 5th.
Generally posts by non-subscribers are
hi all
I just finished installation of xorg. The root startx ok, but
when I log in
as a user other than root and startx it fails and appears:
===
Fatal server error:
PAM authentication failed, cannot start X server.
Perhaps you do not
it's:
-rws--x--x 1 root root
seems ok
On 11/1/06, Chris Staub [EMAIL PROTECTED] wrote:
Tinow ME wrote:
hi all
I just finished installation of xorg. The root startx ok, but
when I log in
as a user other than root and startx it fails and appears
On 11/1/06, Chris Staub [EMAIL PROTECTED] wrote:
Tinow ME wrote:
hi all
I just finished installation of xorg. The root startx ok, but
when I log in
as a user other than root and startx it fails and appears:
===
Fatal server error:
PAM
Hi all:
The method to install acpid isn't included in BLFS boot, anyone can
tell how to config its installation and bootscript?
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
38 matches
Mail list logo
