Hi
Its one configuration for cli if the voicemail its not exist in cucm
Can you provide pls the appropriate link?
Regards
Chrysostomos
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a
Thanks Bell,
Appreciate your valuable opinion , ya you are right regarding CUE-CME, i will
be much faster to use CLI,
Sent from my iPhone
On Jan 4, 2013, at 3:51 AM, William Bell b...@ucguerrilla.com wrote:
I suppose they could but I'd actually expect they wouldn't force you to use
one or
I heard from a lot guys that they had troubles to access the cue through cli
So we have to learn both ways
Also its more fast with cli either with cme or cucm integration
Regards
Chrysostomos
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On
Sorry
Apologize wrong type
Correction:
I heard from a lot guys that they had troubles to access the cue through gui ☺
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Παρασκευή, 4 Ιανουαρίου 2013 1:09 μμ
I would recommend knowing how to do it both ways as certain circumstances
might require it.
Derek
On Thu, Jan 3, 2013 at 11:21 PM, William Bell b...@ucguerrilla.com wrote:
I assume everyone has their own approach here. I do the following:
1. For Unity Connection recordings (call handlers) I
Your screenshots don't really help much. Show us your dhcp config for site
B and HQ. Are you using dhcp helper or local dhcp servers? Please
elaborate...
Thanks,
Derek
On Fri, Jan 4, 2013 at 1:48 AM, SAIKAT SEN saikat...@hotmail.com wrote:
Hello Friends !!
I am
If you mean the service you can use the following SQL command on the CUCM
CLI:
run sql insert into telecasterservice
(pkid,Name,NameASCII,Description,URLTemplate,tkPhoneService,EnterpriseSubscription,Priority)
This exactly what I was looking
Thank you derek
From: Derek Wyss [mailto:wys...@gmail.com]
Sent: Παρασκευή, 4 Ιανουαρίου 2013 3:05 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Add voicemail service
If you mean the service you
Derek,
Is it possible to expand on your statement without violating NDA? I ask because
I struggle trying to imagine a scenario where I could get to UCCX to run the
script that plays the prompts but I would be unable to create a script that
records the prompts (thus forcing me to use CUC or
Bill,
I haven't personally seen a scenario with the recording script not
working. Unless they specifically ask for 1 way or the other.
Derek
On Fri, Jan 4, 2013 at 9:06 AM, William Bell b...@ucguerrilla.com wrote:
Derek,
Is it possible to expand on your statement without violating NDA? I
For CUC, I would use Greetings Administrator
For CUCCX I would use the recording script. It takes 2 seconds to make.
Because they are Call in and record methods, they are guaranteed to work. I
cannot imagine the lab telling you how to record your prompt. I would think
either it would be
All,
I noticed during the following setup that I cannot call DIRECTLY into CUE
but if SiteC-Phone1 is busy or does not answer, forwarding the voicemail
works. I am not even sure you would lose points for this but I always like
to make sure things like this work.
Setup is as follows.
I think it's best if you know multiple ways to record prompts. There's no
telling what you might run into in the lab. I wouldn't take it for
granted that any one method would be available.
All methods rely on some form of integration. If for whatever reason you
can't get the integration to
Did you see the call incoming on the cme? debug voip dial-peer?
Am Freitag, 4. Januar 2013 schrieb Cory Gray :
All,
** **
I noticed during the following setup that I cannot call DIRECTLY into CUE
but if SiteC-Phone1 is busy or does not answer, forwarding the voicemail
works. I am not
Good Catch Steffen. Rookie mistake. I had my zone prefix misconfigured.
From: Steffen Bruening [mailto:stbruen...@gmail.com]
Sent: Friday, January 04, 2013 11:45 AM
To: Cory Gray
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] GK to CUE Direct Call
Did you see the
If I hear you correctly, you have SiteC Router as the DHCP Server for SiteC
and you are using the CUCM-PUB as the DHCP Server for SiteA and SiteB. If
that is the case, you will need ip helper-address X.X.X.X under the voice
subnet's interface pointing to the PUB. Your scope looks good assuming
I have a system for this
create the VLAN structure
interface vlan 400
interface vlan 401
ip helper address 10.10.210.10
interface range fast 0/2 - 4 (assuming 3 phones)
switchport mode access
switchport access native vlan 400
switchport voice vlan 401
ensure the VLAN is shown as up up
show ip
Hello,
Have issue with particular task:
When someone call ext 2002 ( Gwashington) during voicemail greeting when
press 9 then call should forward to external number 4678124 ( PSTN Line).
This is working as expected.
Below is debug isqn q931 output:
HQ-RTR(config)#
Jan 4 23:09:57.642: ISDN
Check CUCM service parameters Display Original Calling Number on Transfer from
Unity. Set this to true.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 4, 2013, at 6:22 PM, Ramcharan Arya wrote:
Hello,
Have issue with particular task:
When someone
Without that parameter you should at least see the DN of the Unity Port as the
calling number. Are you doing a SIP integration? I am not sure what would be
the calling number in that situation.
Sent from my iPhone
On Jan 4, 2013, at 9:14 PM, William Bell b...@ucguerrilla.com wrote:
Check
Agree with William
From: William Bell [mailto:b...@ucguerrilla.com]
Sent: Σάββατο, 5 Ιανουαρίου 2013 4:05 πμ
To: Ramcharan Arya
Cc: ccie_voice@onlinestudylist.com; Chrysostomos Christofi; Bill Lake
Subject: Re: OWLE Lab 4 : Task 6.3 :Voicemail Forward to Alternate extension
Check CUCM service
Thank you everyone for your swift response on this.
Imaging If this site becomes as SRST. Does this service parameter can still
meet telco requirement.
If this is H.323 gateway then it is easy to fix in IOS gateway.
Regards,
Ramcharan Arya
On Fri, Jan 4, 2013 at 8:36 PM, Cory Gray
Hi Christof,I have checked it and it is in the correct order. I rebooted the
UCCX server and tried login via onebutton Now I can see theagent in not ready
state . If I try getting the agent into ready state . I see the following
message...Cannot change agent state because phone is out of
in my experience the phone had to be factory reset. make sure there is a valid
DHCP that phone can access after the factory reset sequence.
To: ch.christ...@logicom.net; b...@ucguerrilla.com
From: singh8...@in.com
Date: Sat, 5 Jan 2013 10:00:46 +0530
CC: ccie_voice@onlinestudylist.com
What is the best practice for the real lab QOS after running the AutoQos - use
the AutoQoS nomenclature and make changes to the classmaps, policymaps and
map-class OR copy the AutoQOS output on a notepad and rename policymaps,
classmaps and mapclass?
I typically follow the second route as it
25 matches
Mail list logo