Congratulation Jason!! ☺
Regards
Chrysostomos
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jason Murray
Sent: Τρίτη, 28 Αυγούστου 2012 4:15 μμ
To: Online Study
Subject: [OSL | CCIE_Voice] CCIE Passed!
Hello everyone just wanted to
Hi to all
First I would like to say many thanks to all of you for the great community
that you have here
Since I am new with ccie voice lab preparation and now I joined your community
, I was wondering if it’s possible to send any questions that I have in the
real world (job) ..
Is it
Hi
I see that you are using MGCP GW
In my case I used h323 VG and I managed to solved the problem with the below
But is not a case I think you can use h323 voice dial peer for calls between
right fax and VG
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
Hi guys
The scenario that I have is
Calls for a specific destination going to voice gateway and there I have a link
with other branch and send the calls there through the link (like extension
call)
The called name and the extension number appear correctly , and the calls going
over the
Hi Nicholas
My setup is already as you mentioned below
So nothing else to do with that?
The failover performing in voice gateway
I have only one gw in the route group
From: Nicholas Samios [mailto:nsam...@staff.iinet.net.au]
Sent: Δευτέρα, 3 Σεπτεμβρίου 2012 12:59 πμ
To: Chrysostomos Christofi
Hi folks
Is anything else that I can do regarding this issue?
Regards
cc
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Δευτέρα, 3 Σεπτεμβρίου 2012 9:07 πμ
To: Nicholas Samios; ccie_voice
Hi
It placed there by a mistake
Now are the correct info's
Regards
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ramcharan Arya
Sent: Τρίτη, 4 Σεπτεμβρίου 2012 9:53 μμ
To: ccie_voice@onlinestudylist.com
Hi
What is the GW type that you choose
Regards
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of otunola Akerele
Sent: Πέμπτη, 6 Σεπτεμβρίου 2012 2:03 μμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] issue with mgcp
hi
Hi
voice translation-rule 30
rule 1 /\+12025552002/ /2002/
LOGPRIGW#test voice translation-rule 30 +12025552002
Matched with rule 1
Original number: +12025552002 Translated number: 2002
Original number type: none Translated number type: none
Original number plan: none Translated
Translated number plan: none
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Πέμπτη, 6 Σεπτεμβρίου 2012 3:34 μμ
To: The Masterplan; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Voice
Hi
We would like to create a sip trunk with ISP but not for voice but for data
Is it any special config to pass data through the sip trunk instead of voice?
Cisco 3745 model
Regards
___
For more information regarding industry leading CCIE Lab
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] DATA THROUGH SIP TRUNK
I don't understand your question. SIP uses a data connection, not the other way
around. If you're just looking for a data connection, SIP isn't a factor.
DQ
d...@cisco.commailto:d
to use SIP
This was my question
Is this possible?
Regards
-Original Message-
From: juancarlosanz...@gmail.com [mailto:juancarlosanz...@gmail.com]
Sent: Πέμπτη, 6 Σεπτεμβρίου 2012 11:58 μμ
To: Chrysostomos Christofi; ccie_voice-boun...@onlinestudylist.com; Dan Quinlan
(daquinla); Krishna
Hi
Any update?
Regards
From: Chrysostomos Christofi
Sent: Τρίτη, 18 Σεπτεμβρίου 2012 1:23 μμ
To: 'ccie_voice-boun...@onlinestudylist.com'
Subject: Trancoding
Hi to all
I need your input pls for the below
I have one cluster cucm and ore remote branch
Calls to remode branch are via h2323
that the two commands are not
necessary but its not here the issue :)
From: Bill Lake [mailto:whl...@gmail.com]
Sent: Τετάρτη, 19 Σεπτεμβρίου 2012 1:29 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Trancoding
Can you give us more
Christofi)
--
Message: 1
Date: Wed, 19 Sep 2012 05:28:30 -0500
From: Bill Lake whl...@gmail.com
To: Chrysostomos Christofi ch.christ...@logicom.net
Cc: Online Study \(ccie_voice@onlinestudylist.com\)
ccie_voice
remove
the command voice-class codec1 from your dial-peer listed below and see what
happens.
Thanks,
Justin McIntyre
On Sep 19, 2012, at 8:19 AM, Chrysostomos Christofi
ch.christ...@logicom.net wrote:
Hi
I have
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2
dtmf-relay sip-notify
codec g711ulaw
no vad
Regards
-Original Message-
From: Justin McIntyre [mailto:justin.mcint...@blackbox.com]
Sent: Τετάρτη, 19 Σεπτεμβρίου 2012 3:54 μμ
To: Chrysostomos Christofi
Cc: ccie_voice@onlinestudylist.com
Subject: Re: Trancoding
Hmm. Lets see. Calls
Hi guys
Is it possible to put # to stop inter-digit timeout for internal
numbers?(extensions)
I believe no but what is your opinion
Scenario:
route pattern set up for local 7 digit numbers: [5-9]XX (local numbers)
internal 4 digit DNs which start with 9(extensions)
when dialling the
Σεπτεμβρίου 2012 3:31 μμ
To: Chrysostomos Christofi
Subject: Re: [OSL | CCIE_Voice] Internal numbers overlap with one route pattern
Try a translation pattern # with a trailing hash discard.
On 20 Sep 2012 13:28, Chrysostomos Christofi
ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote:
Hi
Hi Folks
I saw from vik videos that he is going to user templates in cuc and change the
setting for the users(password,etc)
But when I am trying in a real environment I could not achieve this goal with
these steps
I could do it ONLY from the bulk edit in the user tap
I missed anything with
Hi Kevin and Krishna
Its clear now
Thank you guys
From: kevinspice...@gmail.com [mailto:kevinspice...@gmail.com] On Behalf Of
Kevin Spicer
Sent: Σάββατο, 22 Σεπτεμβρίου 2012 4:16 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice
Hi again
In this lab we need the cooperation of cuc (call handler)
Just to refresh your memory call coming into ccx , then we have created there a
script asking for a pin and then ccx redirect the call to cuc because we want
the caller to say his/her name before to connect to the meet me
Hi Folks
I saw this question in the ip telephony forum and I am curious what is the
issue with that
The mva is not working to a remote gw through ipsec vpn
Do you have any idea why?
May is the ipsec that creating this issue?
Question below:
currently have Cisco MVA working at our core
Hi Rynard
The phones are 7942?
If you reboot the gw the phones can register and then loose again the
registration?
Regards
Chrysostomos
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Rynard Coetzee
Sent:
Hi folks
When I export CDRs in CUCM ALL the incoming numbers(international/National) are
NULL in the partition
Can I mark the called numbers to which type and so on I will see in the
partition for the calling number the correct destination?
The request is ONLY for the incoming numbers and not
Hi
If you can help with that it will be appreciated
I have re-installed pub and then the replication is not working any more
Do you have something to propose?
admin:utils dbreplication status
utils dbreplication status
Status cannot be performed
...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Thursday, November 01, 2012 7:40 AM
To: Online Study
(ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com)
Subject: [OSL | CCIE_Voice] Re-Built PUB
Hi
***
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Πέμπτη, 1 Νοεμβρίου 2012 3:08 μμ
To: Craig Hill (crahill); Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL
dbreplication stop
2. Pub: utils dbreplication stop
3. Pub: utils dbreplication reset all
Thank you
Chrysostomos
From: sbar...@mystictraveler.net [mailto:sbar...@mystictraveler.net]
Sent: Πέμπτη, 1 Νοεμβρίου 2012 8:40 μμ
To: Chrysostomos Christofi; Online Study (ccie_voice@onlinestudylist.com)
Subject
Hi Folks
I got a little confused
If I need 13 channels only , then the below is correct?
Controller e1 0/1/1
Pri-group times 1-12,16
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a
Thanks mate
Now is clear
From: Cory Gray [mailto:corygray22...@hotmail.com]
Sent: Σάββατο, 3 Νοεμβρίου 2012 7:33 μμ
To: Chrysostomos Christofi; 'Online Study'
Subject: RE: [OSL | CCIE_Voice] EI PRI
Pri-group timeslots 1-13 (h323)
Pri-group timeslots 1-13 service mgcp (mgcp)
I leave out the D
Guys thanks all of you for your inputs
From: Craig Hill (crahill) [mailto:crah...@cisco.com]
Sent: Σάββατο, 3 Νοεμβρίου 2012 9:53 μμ
To: Bill Lake; Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: RE: [OSL | CCIE_Voice] EI PRI
Easy way to verify is to show isdn
Hi
For IPPM the pin is from the end user configuration tab (PIN?)
Regards
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Hi
If I changed it from there but its not change then I have to restart a specific
service?
From: Cory Gray [mailto:corygray22...@hotmail.com]
Sent: Κυριακή, 11 Νοεμβρίου 2012 5:17 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice
Hi Craig
Synch agent in cucm?
From: Craig Hill (crahill) [mailto:crah...@cisco.com]
Sent: Δευτέρα, 12 Νοεμβρίου 2012 8:17 μμ
To: Chrysostomos Christofi; Cory Gray
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: RE: [OSL | CCIE_Voice] IPPM
If it doesn’t work immediately, restart
Hi Folks
If I use CUC and record a message then I can upload this prompt file into ipcc
right?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check
Hi Ram
I believe that all the approach are correct
From myself I prefer the static command into the router
About ccm-manager or telephony services both also are correct
Depend for what the question ask
Regards
cc
From: ccie_voice-boun...@onlinestudylist.com
Hi Folks
I am experiencing a very strange issue
Suddenly the voice mail ports lost the registration with CUC
Device name prefix is correct
Before 2 hours everything was working ok
Any ideas?
I have reboot cucms, cuc
___
For more information
Νοεμβρίου 2012 1:23 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Unity connection 7.1 voice mail ports become
unregistered
Hi,
Try restarting all the services from CUC and respective services in CUCM (all
nodes in both servers
Hi
For proctor labs from where I can find the credentials for the servers,
routers, switch?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Ok I found it
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Σάββατο, 17 Νοεμβρίου 2012 2:57 μμ
To: Online Study (ccie_voice@onlinestudylist.com)
Subject: [OSL | CCIE_Voice] User and pass for the devices
Bill, hi
I have deleted some ports and recreate it both in cuc and cucm but with no luck
Ports still showing unknown
From: Bill Lake [mailto:whl...@gmail.com]
Sent: Σάββατο, 17 Νοεμβρίου 2012 3:32 μμ
To: Chrysostomos Christofi
Subject: Re: [OSL | CCIE_Voice] Unity connection 7.1 voice mail
Hi
All are correct unfortunately
As I said everything was ok and suddenly the voice mail ports lost the
registration
From: Sivakumar Mahalingam [mailto:sima...@gmail.com]
Sent: Σάββατο, 17 Νοεμβρίου 2012 8:47 μμ
To: Craig Hill (crahill)
Cc: Chrysostomos Christofi; Bill Lake; Online Study
Hi
In ip expert site I can find a cue license?
If yes where are that?
Regards
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Hi
What is the best scenario about ipphones in proctor labs
I men what are you using when you connected into the lab
I tried to register my cipc without success
Do you have a good approach about that?
Regards
___
For more information regarding
No ones ?:)
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Κυριακή, 18 Νοεμβρίου 2012 11:37 πμ
To: Online Study (ccie_voice@onlinestudylist.com)
Subject: [OSL | CCIE_Voice] Ipphones in Proctor labs
Hi
What
No ones ?:)
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Κυριακή, 18 Νοεμβρίου 2012 11:22 πμ
To: Online Study (ccie_voice@onlinestudylist.com)
Subject: [OSL | CCIE_Voice] CUE LICENSE FOR CUCM
Hi
In ip
password cisco
6. Or install CME license:
se-172-16-0-0# software install clean url
7. ftp://10.10.210.5/FTP/cue-vm-license_12mbx_cme_7.0.1.pkg username
cisco password cisco
Proctor Labs Voice Pod Frequently Asked Questions
Table
From: Chrysostomos Christofi
Sent: Κυριακή, 18 Νοεμβρίου 2012 7:19 μμ
-
From: Marko Milivojevic [mailto:mar...@ipexpert.com]
Sent: Κυριακή, 18 Νοεμβρίου 2012 8:39 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Ipphones in Proctor labs
Perhaps if you clarified the question a little bit. ProctorLabs rack
Hi Bill
With the practice lab if you have the ipblue available for only 20 minutes and
the whole lab is 7:30 h then it's a big issue!
From: Bill Lake [mailto:whl...@gmail.com]
Sent: Κυριακή, 18 Νοεμβρίου 2012 10:55 μμ
To: Marko Milivojevic
Cc: Chrysostomos Christofi; Online Study (ccie_voice
Hi
If we have cue in the lab then we CAN proceed with the initialization through
the web interface?
Or we have to proceed through cli
Or you can go with both ways
I hope that my question is not violate any policies !
Regards
cc
___
For more
Guys
I am wondering if we can't get in the web qui
Is that possible?
From: Edgar Feliz [mailto:ejzi...@gmail.com]
Sent: Πέμπτη, 22 Νοεμβρίου 2012 4:36 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] QUESTION FOR THE LAB
Unless
Νοεμβρίου 2012 4:48 μμ
To: Chrysostomos Christofi
Cc: Edgar Feliz; Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] QUESTION FOR THE LAB
As far as I know, you must initialize through the cli guide and after that you
can configure it through the gui or cli. Some people say
) is the better choice, especially if you need MWI in SRST mode.
On Thu, Nov 22, 2012 at 3:32 PM, Chrysostomos Christofi
ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote:
Final question :)
For the mwi part we have to configure in cli
ccn application ciscomwiapplication?
As soon as we
Νοεμβρίου 2012 8:47 μμ
To: Craig Hill (crahill)
Cc: Chrysostomos Christofi; Bill Lake; Online Study
(ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Unity connection 7.1 voice mail ports become
unregistered
Also make sure the Device Prefix Name under Telephony Integrations Port
Hi folks
I have the cue license for proctor labs
I am wondering if I can use it for my cisco router (for lab) which not has a
AIM cue module but ISM
Is that possible?
___
For more information regarding industry leading CCIE Lab training, please
Thank you cory
Do you have the link for the lic file?
From: Cory Gray [mailto:corygray22...@hotmail.com]
Sent: Τρίτη, 27 Νοεμβρίου 2012 7:38 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] CUE LIC FILE
The license file is different
Thanks guys
From: Sivakumar Mahalingam [mailto:sima...@gmail.com]
Sent: Τρίτη, 27 Νοεμβρίου 2012 10:41 μμ
To: Chrysostomos Christofi
Cc: Cory Gray; Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] CUE LIC FILE
http://www.cisco.com/cisco/software/release.html?mdfid
You can use default icd script
Default icd script is for CSQ agents
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of virajith
Sent: Τετάρτη, 28 Νοεμβρίου 2012 12:00 μμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] UCCX
...@rediffmail.com]
Sent: Τετάρτη, 28 Νοεμβρίου 2012 5:30 μμ
To: Chrysostomos Christofi
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] UCCX script
hi Chrysostomos,
Thanks for your reply.
I have tried to modify the default ICD script many times . However it does not
work for me
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] What access we will have in the lab
You have access to the products page and all associated docs.
Sent from my iPhone
On Dec 5, 2012, at 7:39 AM, Chrysostomos Christofi
ch.christ
Hi
Did you check that the script is correct?
You can check that by choose the validation script in ipccx editor
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of virajith
Sent: Πέμπτη, 6 Δεκεμβρίου 2012 12:32 μμ
To:
Hi
Answers:
1) Yes its correct
2) You need one button login , which you can find it
Support/voice and unified communications/contact center
express/configure/configuration example and tech notes
Url:
http://192.168.1.248:6293/ipphone/jsp/sciphonexml/IPAgentLogin.jsp
Case
Hi
First check in PUB
utils network connectivity To verify that PUB and SUB have connectivity
1. Sub: utils dbreplication stop (wait for it to complete before going to step
2.)
2. Pub: utils dbreplication stop (wait for it to complete before going to step
3.)
3. Pub: utils dbreplication
Hi
What is the 10.10.110.3 .Is the ip of the GW?
Also I suggest
!
dial-peer voice 223 pots
service aa
incoming called-number 3500
Chrysostomos
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Steffen Bruening
Sent: Δευτέρα, 17
The phone is associated with a user?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of virajith
Sent: Τετάρτη, 19 Δεκεμβρίου 2012 8:24 πμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CUPS- Presence - deskphone mode not
Hi Folks
If I want to use a professional studio to record prompts for IPCCX then what is
the correct format for the recording file?
* G711 prompts, then CCITT u-Law.
8.000 kHz, 8 Bit, Mono 7 kb/sec.
The below are corrects/?
___
For more information
Hi
Its working ok
But if you have an issue send an email to support
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ramcharan Arya
Sent: Πέμπτη, 20 Δεκεμβρίου 2012 2:02 μμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice]
Hi Folks
I have created a script that will root the call base of caller number:
I used get call contact info .Its working ok if I set only a specific number in
the if section
What I have to config in the callinginfo to match any number starting with 5 ?
(something like 5!)
Attached is the
Thanks a lot tanner
I will check if its working your propose and I will return back with a feedback
Regards
cc
From: Tanner Ezell [mailto:tanner.ez...@gmail.com]
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 4:51 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re
Hi
I use Callerinfo.charAt(0) == 996 in the IF (my calling number starting with
996... but unfortunately its not matching
I am doing something wrong?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent
To: Chrysostomos Christofi
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] uccx scripting side
subString should be substring.
On Fri, Dec 21, 2012 at 9:04 AM, Chrysostomos Christofi
ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote:
Sorry Tanner but I am not find in the string
Tanner
Its working fine now
Thank you very much
Regards
Chrysostomos
From: Tanner Ezell [mailto:tanner.ez...@gmail.com]
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 9:03 μμ
To: Chrysostomos Christofi
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] uccx scripting side
Oops, you know
Ramcharan , hi
Both route patterns for the below are correct
It depends what the question ask , or what is your requirement
1) With # in the h323 you don't have to use Predot trailing # you can
use only Predot but for MGCP GW its need it. But its not any harm if you use
Predot
Hi
Let’s say we want number 2525 to have access to local numbers and national
numbers but NOT for international calls then:
!
dial-peer cor custom
name local
name international
!
!
dial-peer cor list local
member local
!
dial-peer cor list international
member international
!
dial-peer voice 1
Vir
Assume that the end user has in the controlled devices the correct phone
Assume the in the phone settings the owner is the correct user
Did you add in the cups the specific user to has a deskphone?
Did you configure the cti application user in cucm and also in cups?
If all the above are done
Hi
Can we have the configuration for telephony service?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of sanity insanity
Sent: Πέμπτη, 27 Δεκεμβρίου 2012 2:52 μμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] In cme -srst
Happy new year to all
Thank you for the update regarding this issue
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of CCIEing
Sent: Τρίτη, 1 Ιανουαρίου 2013 1:27 πμ
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE
Hi
Did you configure exactly as the below the parameters?(case sensitive)
1) Ext
2) ID
3) Pwd
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of singh
Sent: Τετάρτη, 2 Ιανουαρίου 2013 6:51 μμ
To: b...@ucguerrilla.com
Reload the CUPS may solve your issues
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Suresh Bhandari
Sent: Τετάρτη, 2 Ιανουαρίου 2013 8:06 μμ
To: Ramcharan Arya
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUCM-CUPS
Hi
Its one configuration for cli if the voicemail its not exist in cucm
Can you provide pls the appropriate link?
Regards
Chrysostomos
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a
I heard from a lot guys that they had troubles to access the cue through cli
So we have to learn both ways
Also its more fast with cli either with cme or cucm integration
Regards
Chrysostomos
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On
Sorry
Apologize wrong type
Correction:
I heard from a lot guys that they had troubles to access the cue through gui ☺
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Παρασκευή, 4 Ιανουαρίου 2013 1:09 μμ
This exactly what I was looking
Thank you derek
From: Derek Wyss [mailto:wys...@gmail.com]
Sent: Παρασκευή, 4 Ιανουαρίου 2013 3:05 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Add voicemail service
If you mean the service you
Agree with William
From: William Bell [mailto:b...@ucguerrilla.com]
Sent: Σάββατο, 5 Ιανουαρίου 2013 4:05 πμ
To: Ramcharan Arya
Cc: ccie_voice@onlinestudylist.com; Chrysostomos Christofi; Bill Lake
Subject: Re: OWLE Lab 4 : Task 6.3 :Voicemail Forward to Alternate extension
Check CUCM service
Strange
You are not in srst mode when you try to login right?
From: singh [mailto:singh8...@in.com]
Sent: Σάββατο, 5 Ιανουαρίου 2013 6:33 πμ
To: Chrysostomos Christofi; b...@ucguerrilla.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: RE: [OSL | CCIE_Voice] UCCX one button login
Hi
When become in srst mode then the router send the call to CUC through pots dial
peer and assume that you have translation rule in the cucm for voice mail
number in order to translate the calling number into 4 digits then I believe
that it will work perfect
Also put an external number mask in
Congratulations Steffen
You have started very good the new year :)
Regards
Chrysostomos
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Steffen Bruening
Sent: Σάββατο, 5 Ιανουαρίου 2013 2:30 μμ
To: ccie_voice
Subject: [OSL |
For many peoples this question maybe it's funny , but if you know I would like
to know if I can bring an electronic cigarette into the class
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are
Hi Marko
I mean into the testing class for the ccie lab
-Original Message-
From: Marko Milivojevic [mailto:mar...@ipexpert.com]
Sent: Σάββατο, 5 Ιανουαρίου 2013 7:27 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Question
Thank you Marko
-Original Message-
From: Marko Milivojevic [mailto:mar...@ipexpert.com]
Sent: Σάββατο, 5 Ιανουαρίου 2013 7:58 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Question for test class
I would guess
Hi Ram
First check in PUB
utils network connectivity To verify that PUB and SUB have connectivity
1. Sub: utils dbreplication stop (wait for it to complete before going to step
2.)
2. Pub: utils dbreplication stop (wait for it to complete before going to step
3.)
3. Pub: utils
To: Chrysostomos Christofi
Cc: Marko Milivojevic; Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] Question for test class
I would doubt it, anything electronic is forbidden.
I know a smoker who took the test and they could leave to take the a smoke at
the cost of their lab
Hi
I am getting the below from license status
Do you know how to enable voicemail for lab proposes
CUE# sh license status application
voicemail disabled, ivr session quantity (2) is equal to or exceeds available
ports (2)
ivr enabled: 2 sessions
Regards
sipv2
session target ipv4:10.xx.xx.xx (cuc ip)
dtmf-relay rtp-nte
codec g711ulaw
no vad
sip-ua
mwi-server 10.xx.xx.xx unsolicited
From: Chrysostomos Christofi
Sent: Τρίτη, 8 Ιανουαρίου 2013 7:06 μμ
To: 'Suresh Bhandari'
Subject: RE: [OSL | CCIE_Voice] CME-Unity Connection integration using
Hi
Because I cant test it right now
if we use factory default first then proceed with the admin,ntp,timezone , etc
that its asking and then proceed with the software installation clean url , and
then finally finish the configuration it will be ok right?
-Original Message-
From:
Hi Guys
I have obtain demo lic file for cue in my ism sre module
I was trying to install the license with the below command but without success
.Reason access denied , but the credentials are correct
do you have any ideas? The lic file located in Desktop
ftp username: cisco
ftp pass: 12345
it worked with
license install tftp://192.168.1.249/CUE.lic
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Τετάρτη, 9 Ιανουαρίου 2013 3:09 μμ
To: Online Study (ccie_voice@onlinestudylist.com)
Subject: [OSL
you need the license for aim cue in proctor labs?
From: Suresh Bhandari [mailto:bring...@gmail.com]
Sent: Τετάρτη, 9 Ιανουαρίου 2013 3:53 μμ
To: Chrysostomos Christofi
Cc: Bill; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE license for CME
Factory reset will clean
1 - 100 of 155 matches
Mail list logo