Finally, a bad plan this Ebay ad.
After many unsuccessful attempts to repair my UTS and the growing fear
that my problem is at the level of the EPROMs inside the Program
Cartridge, I finally decided to buy the UTS on Ebay.
Unfortunately the seller is the style to cancel a finalized, paid and
Hi all,
I'm interested on RX02 Disks, and would be happy to get some of them, to
create RT11 installation and diagnostic disks.
I know there are RX01/02 emulators available, but I would like to use
the original way and equipment.
Destination would be Germany.
Many Greetings
Ulrich
On 08/01/2017 05:27 PM, Jerry Weiss wrote:
If you install the DELUA, don’t forget there is TCP/IP support for RT11
from Alan Baldwin at http://shop-pdp.net/rthtml/tcpip.htm.
Hi Jerry -- I had seen the RT-11 TCP/IP stuff, but my 11/45 can only
address 256K of memory, so doesn't meet the
where are you located?
On Tue, Aug 1, 2017 at 4:53 AM, Ulrich Tagge via cctalk <
cctalk@classiccmp.org> wrote:
> Hi all,
>
> I'm interested on RX02 Disks, and would be happy to get some of them, to
> create RT11 installation and diagnostic disks.
> I know there are RX01/02 emulators available,
oops, Germany.
On Tue, Aug 1, 2017 at 7:08 PM, william degnan wrote:
> where are you located?
>
> On Tue, Aug 1, 2017 at 4:53 AM, Ulrich Tagge via cctalk <
> cctalk@classiccmp.org> wrote:
>
>> Hi all,
>>
>> I'm interested on RX02 Disks, and would be happy to get some of
On Tue, Aug 1, 2017 at 4:53 AM, Ulrich Tagge via cctalk
wrote:
> I'm interested on RX02 Disks, and would be happy to get some of them, to
> create RT11 installation and diagnostic disks.
> I know there are RX01/02 emulators available, but I would like to use the
> original
A toast for the couple!
Enviado do meu Tele-Movel
On Aug 1, 2017 10:16 PM, "Henry via cctalk" wrote:
> So in good news I'm getting married, to a beautiful American I'm stealing
> to more temperate climates. South East UK. Long story short it's her or the
> PCs,
On 08/01/2017 01:23 PM, Jay Jaeger wrote:
I have posted my code (and pinouts) on Google Drive at:
https://drive.google.com/open?id=0B2v4WRwISEQRUUxuNGhZRENvYjQ
Thanks, Jay -- I'll check it out!
Mattis: I *do* have a DELUA, actually, but haven't slotted it yet to
check it out. Your
> On Aug 1, 2017, at 7:32 PM, Fritz Mueller via cctalk
> wrote:
>
> On 08/01/2017 05:27 PM, Jerry Weiss wrote:
>> If you install the DELUA, don’t forget there is TCP/IP support for RT11 from
>> Alan Baldwin at http://shop-pdp.net/rthtml/tcpip.htm.
>
> Hi Jerry -- I had
Strange seller, I do not understand anything, he handed his UTS for ten
times the price, but in the same time he just sent me a tracking number
O_o. I do not know what to expect. Will I receive this UTS or not? If
not, will I get my money back? I do not know. Meanwhile, for the
principle, I
I have many RX02 disks, but shipping to Germany may be too expensive. Let
me know if there is no local source. I am located in Landenberg, PA USA
b
On Tue, Aug 1, 2017 at 8:21 PM, Charles Dickman via cctalk <
cctalk@classiccmp.org> wrote:
> On Tue, Aug 1, 2017 at 4:53 AM, Ulrich Tagge via
> On Aug 1, 2017, at 2:50 PM, Mattis Lind via cctalk
> wrote:
>
> 2017-07-31 21:05 GMT+02:00 Fritz Mueller via cctalk :
>
>>
>>> On Jul 31, 2017, at 11:30 AM, Bill Gunshannon via cctalk <
>> cctalk@classiccmp.org> wrote:
>>>
>>> Well, I'm
On Tue, Aug 1, 2017 at 6:21 PM, Charles Dickman via cctalk <
cctalk@classiccmp.org> wrote:
> Are RX02 disks actually special or will any SSDD 8in floppy work?
TL;DR: No. As standard 8-inch floppy disks go, only SSSD are useful in an
RX02 drive, even for double-density use (DEC RX02 modified MFM
So in good news I'm getting married, to a beautiful American I'm stealing to
more temperate climates. South East UK. Long story short it's her or the PCs,
especially as I have to take on all of "stuff" and I'm quite sure donating my
two rs/6000-f50s gives me the space.
I am not using this as
For anyone looking for a vintage cap, here is what I have:
http://vintagecomputer.net/browse_thread.cfm?id=693
I'll keep the list up to date. Contact me through my site if you're
interested in any of these.
Bill
2017-07-31 21:05 GMT+02:00 Fritz Mueller via cctalk :
>
> > On Jul 31, 2017, at 11:30 AM, Bill Gunshannon via cctalk <
> cctalk@classiccmp.org> wrote:
> >
> > Well, I'm confused now. What do 16 bit paralel and ethernet have to do
> with each other?
>
> Nothing, directly;
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Ali via
> cctalk
> Sent: 01 August 2017 19:00
> To: 'Bill Gunshannon' ; 'General Discussion:
> On-Topic and Off-Topic Posts'
> Subject: RE: Sperry
From: cctech [cctech-boun...@classiccmp.org] on behalf of Michael Thompson via
cctech [cct...@classiccmp.org]
Sent: Monday, July 31, 2017 8:15 PM
To: cctech
Subject: Importing a PDP-8 from Canada
The RICM has an opportunity to get a PDP-8/M (built in
$250 for those dimension across the country is a pretty good quote via LTL,
do you know what class the quote was done against ?
As to not being able to strap down, its pretty easy. Go to you cheapie
parts house or if you have a Harbor Freight get 4 web tie downs. 4 if not
long enough for each.
As long as any improvements were done in Canada using Canadian parts, it
wouldn't matter anyway. Canada is a signatory to NAFTA, and Canadian goods
(with rare exceptions) are duty-free to the US.
If you have any doubt, call the border station where you plan to import the
goods, tell them what
All,
I've got a pile of old Sun boxes I'm going through, dealing with dead
NVRAMs of course. I ordered some ST 48T02 replacements from Mouser, only to
find out they're not 100% compatible. So, since I was going to have to
modify a whole bunch of old 48T02s, and there are space constraints on some
> -Original Message-
> From: Maciej W. Rozycki [mailto:ma...@linux-mips.org]
> Sent: 01 August 2017 19:38
> To: r...@jarratt.me.uk
> Cc: 'General Discussion: On-Topic and Off-Topic Posts'
>
> Subject: RE: Reset NVRAM on DECstation 5000/240
>
> On Mon, 31 Jul
Pete,
I am not sure what class that was. We generally ship with these guys for our
own products which are much more delicate then an empty rack. So far they have
been good to us! ;)
Thanks for the suggestions on places to find everything. I will pass it on to
the seller. Based on the replies
On 7/31/2017 12:52 PM, Fritz Mueller via cctalk wrote:
>
>> On Jul 31, 2017, at 8:19 AM, Jay Jaeger wrote:
>>
>> I have Ethernet shield for my Arduino Uno, and I use that and a simple
>> (in my case, perl, program to talk to the final destination device. I
>> have two
On 08/01/2017 07:02 AM, Pete Lancashire via cctalk wrote:
> Or find a place that ships a lot of stuff and do the same there.
In my case, this. The outfit I use has a contract with a freight
shipper and their price for packing, palletizing and shipping is often
lower than my cost when dealing
On 08/01/2017 10:16 AM, Al Kossow via cctalk wrote:
Another stillborn project?
I don't see any software to make the Beaglebone talk Unibus
Yes, this one has been around for a couple years now but sadly doesn't
seem to have progressed...
> On Jul 31, 2017, at 11:15 PM, Ali via cctech wrote:
>
> I know this topic comes up pretty regularly and I am sorry to post about it
> again but any recommendations for a freight shipper from Atlanta, GA to LA,
> CA?
>
> I am trying to ship an empty 22U Rack. The
From: cctalk [cctalk-boun...@classiccmp.org] on behalf of Fritz Mueller via
cctalk [cctalk@classiccmp.org]
Sent: Monday, July 31, 2017 3:05 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: PDP-11: DR11-C to FPGA or 1284?
> On Jul 31,
Hi Ali,
I've had a few things shipped lately and $250 isn't out of line. It's small
enough that you could try your luck on UShip; if you go that route the
pallet wouldn't be needed. If you use a traditional transporter, see if the
seller is willing to pick up a couple cheap nylon ratcheting tie
On 2017-08-01 10:26 AM, Bill Gunshannon via cctalk wrote:
From: cctalk [cctalk-boun...@classiccmp.org] on behalf of Fritz Mueller via
cctalk [cctalk@classiccmp.org]
Sent: Monday, July 31, 2017 3:05 PM
To: General Discussion: On-Topic and Off-Topic Posts
Another stillborn project?
I don't see any software to make the Beaglebone talk Unibus
On 8/1/17 9:39 AM, Toby Thain via cctalk wrote:
> I just saw this a few minutes ago...
>
> https://trmm.net/Unibus
>
>
> --Toby
They canceled my order as well, just after sending me a message wondering if I
wanted the keyboard
I hope they just relist it
On the other hand, this isn't the same as your unit, the connectors on the back
are in a different
place and I don't see the 9 pin keyboard connector so this may be a
(*Perk*... I'm in Saskatchewan!)
Jim
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Paul Anderson
via cctalk
Sent: Monday, July 31, 2017 8:12 PM
To: Michael Thompson ; General Discussion:
On-Topic Posts
On 8/1/17 8:41 AM, Al Kossow via cctalk wrote:
> I hope they just relist it
jackass relisted it for $1000, still w/o keyboard
www.ebay.com/itm/142462575631
Report him to ebay.
bill
From: cctalk [cctalk-boun...@classiccmp.org] on behalf of Al Kossow via cctalk
[cctalk@classiccmp.org]
Sent: Tuesday, August 1, 2017 12:00 PM
To: cctalk@classiccmp.org
Subject: Re: Sperry UTS 40 on Ebay - Statesboro, Georgia
On
> From: Al Kossow
> For what it's worth, I've been seeing sellers cancel orders after the
> fact a LOT this year.
Any guesses as to what's going on?
Noel
On 8/1/2017 11:04 AM, Al Kossow via cctalk wrote:
On 8/1/17 10:49 AM, Noel Chiappa via cctalk wrote:
Any guesses as to what's going on?
sellers not getting the prices they wanted.
Not likely to sell via this treatment of potential buyers. It isn't
worth $1000 unless someone is using the
> Report him to ebay.
>
What for? eBay doesn't care. Not saying you shouldn't as a matter of
principle but don't expect much.
-Ali
On 8/1/17 10:49 AM, Noel Chiappa via cctalk wrote:
> Any guesses as to what's going on?
sellers not getting the prices they wanted.
> On Aug 1, 2017, at 11:04 AM, Al Kossow via cctalk
> wrote:
>
>
>
> On 8/1/17 10:49 AM, Noel Chiappa via cctalk wrote:
>
>> Any guesses as to what's going on?
>
> sellers not getting the prices they wanted.
Isn’t that the point of having a reserve or setting the
On 8/1/2017 11:14 AM, Guy Sotomayor Jr via cctalk wrote:
Isn’t that the point of having a reserve or setting the initial bid to your
minimum price?
TTFN - Guy
I think the ebay fees for the listing are higher for those features.
I've seen a lot of sellers listing it w/o reserve, which Ebay
On 8/1/2017 9:50 AM, Jim MacKenzie via cctalk wrote:
(*Perk*... I'm in Saskatchewan!)
Jim
(Alberta here)
I think the truck moving North is the wanted one.
How about shipping a few PDP11's north, since all the
8's are gone.
Ben.
On Mon, 31 Jul 2017, Rob Jarratt wrote:
> > It is. Check the "DECstation/DECsystem 5000 Model 200 Series Maintenance
> > Guide" (EK-PM38C-MG-002), available online.
> >
>
> I have that manual. Having checked again I realise I should have searched
> for "NVR" and not "NVRAM", then I would have
Thanks to everyone for comments and suggestions. It sounds like our normal
accession paperwork would work for a bill of sale and would show the
devices as a donation with no value. Getting the accession paperwork
notarized in Canada might make it look more official.
On Mon, Jul 31, 2017 at 8:15
On 8/1/17 11:25 AM, jim stephens via cctalk wrote:
>
>
> I would not void a closed
> sale either if I couldn't help it. But that's just me.
Like I say most people agreed up until this year.
I've had more bad deals or people just canceling my bid and closing
auctions with 'item no longer
45 matches
Mail list logo