On Fri, 4 Aug 2017, Guy Sotomayor Jr wrote:
Unfortunately PATA drives are becoming difficult to find and designing a
SATA interface (not to mention layout issues) is not for the faint of
heart.
That's why I suggest using dirt cheap external PATA<-->SATA bridges.
Christian
On Fri, 4 Aug 2017, Sam O'nella wrote:
What are the 4 games?
SPIEL1: Vier in einer Reihe
SPIEL2: Lebenserwartung
SPIEL3: Roulette
SPIEL4: Kopfnuss (Superhirn)
Christian
Sigh (envy), I need to relocate to US. Does anyone need a poor engineer ?
-Messaggio originale-
Da: cctalk [mailto:cctalk-boun...@classiccmp.org] Per conto di Steven M Jones
via cctalk
Inviato: sabato 5 agosto 2017 08:39
A: General Discussion: On-Topic and Off-Topic Posts
Oggetto: VCF Wes
On 2017-08-05 02:15, Rob Jarratt via cctalk wrote:
-Original Message-
From: Rob Jarratt [mailto:robert.jarr...@ntlworld.com]
Sent: 15 July 2017 22:11
To: General Discussion: On-Topic and Off-Topic Posts
(cctalk@classiccmp.org)
Subject: Looking for a TURBOchannel Extender Cable
Today
On 2017-08-04 18:12, David Bridgham via cctalk wrote:
On 8/4/17 11:25, emanuel stiebler wrote:
What FPGAs are you using?
Xilinx Artix 7. More specifically, we're using a ZTEX 2.13 FPGA module
for our prototyping. Unless some good reason came up, I was thinking to
stick with the same FPGA.
On 8/5/17 04:29, emanuel stiebler wrote:
>> Xilinx Artix 7. More specifically, we're using a ZTEX 2.13 FPGA module
>> for our prototyping. Unless some good reason came up, I was thinking to
>> stick with the same FPGA.
>
> Artix 7? Nice, use them a lot.
>
> Vivado or ISE?
Vivado. Another huge
On 2017-08-05 08:55, David Bridgham via cctalk wrote:
On 8/5/17 04:29, emanuel stiebler wrote:
Xilinx Artix 7. More specifically, we're using a ZTEX 2.13 FPGA module
for our prototyping. Unless some good reason came up, I was thinking to
stick with the same FPGA.
Artix 7? Nice, use them a
> > I have not yet been able to locate one of these, although I now know
> > the part number, which is 17-03335-01.
>
>
> Andf it is even in the UK:
>
> http://refurb.icc4it.co.uk/parts/legacy/dec/17-03335-01
>
Thanks Emanuel. Actually I have already seen that page. It looks like one of
those
>
> > > I have not yet been able to locate one of these, although I now know
> > > the part number, which is 17-03335-01.
> >
> >
> > Andf it is even in the UK:
> >
> > http://refurb.icc4it.co.uk/parts/legacy/dec/17-03335-01
> >
>
>
> Thanks Emanuel. Actually I have already seen that page. It lo
Output:
.SET DU CSR=17760340
?DU-W-Patch handler bootstrap, put CSR at 3264
As you may have already learned, use only 16bit addresses for this.
Hi Jerry,
Thanks, you found the failure! (it's always the same with Copy and Paste).
After I have corrected this to 160340 and afterwards all was run
Al just put the TI Silent 700 Model 763/765 maintenance manual up on
Bitsavers. (Thanks Al!)
The 763 and 765 are the models using internal bubble memory for between
10,000 and 80,000 characters of local storage. They use either one or two
"discrete memory boards", with one 92 Kbit bubble device e
On 08/05/2017 06:29 PM, Eric Smith via cctalk wrote:
> Bubble memory devices typically have many minor loops, not all of
> which are usable. TI printed mask data on the label of the bubble
> device, identifying the defective loops. When a bubble memory board
> is installed or replaced in the ter
I just uploaded a bunch of ACS 8600 documentation to bitsavers, but the Users
manual I
have is preliminary from 1982. Does anyone have a later version that has the
missing
chapters (esp the schematics Appendix)?
Hi List!
Movin right along.
Programmers console now properly attached to light screening bar.
Front panel and bezel on. Needs a bit more work.
Not as secure or as straight as I would like.
Then there's the key lock problem.
Its in the off position and of course I don't have the key.
On Aug 5, 2017 19:42, "Chuck Guzis via cctalk"
wrote:
My recollection is that the track data was printed by Intel. At least
mine came that way.
Both Intel and TI printed the bad loop map/mask on the device label. Intel
also programmed the map into a special "boot loop" in the device; TI did
n
Those keys are common across nearly all DEC machines prior to the ones that
started using plastic keys. XX2247 is the code. -- Ian
On Sat, Aug 5, 2017 at 10:29 PM, Rod Smallwood via cctalk <
cctalk@classiccmp.org> wrote:
> Hi List!
>
> Movin right along.
>
> Programmers console now prope
16 matches
Mail list logo