My vin tag fell off/or was stolenfrom the door
jam. Can anyone tell me where the other vin are located on the
frame? The exact locations.
Larry Williams
Replies to this message are sent to The Chevelle Mailing List
Try Delta Plating in Stockton (209-948-2768). They are one of the few still
doing chrome. Also Valley Chrome in Stockton.
- Original Message -
From: [EMAIL
Works great. Thanks
Larry Williams
65 SS 427
st] Pop=Up
Stopper
Works
great. Thanks
Larry
Williams
65 SS
427
My provider uses a mail filtering service called
Postini.com All my mail goes thru it and is filter for virus, and
junk. Seems to work very well. It caught the Chevelle List
virus.
Larry
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
I have been running an Edelbrock 750 cfm on my 65 SS 427
motorsince 1992. Its ran very well and is easy to tune with metering
rod and jet changes. The book that comes with the carb is easy to
understand. I also have a 650 CFM on a Ford 302 in an old truck that sits
and sits and sits, and
I grew up in the Bay Area spend many Friday/Saturday nites
cruzing El Camino in the 60s. Remember when you could fill up with Custom
Supreme for $4.00 and go drag racing.
Larry Williams
65 SS 427 BB
Did any of you see the article in March Car Craft about the X
pipe installation on the mustang exhaust system. It was a horsepower
comparision with the H pipe and open headers. The X pipe made 335 hp
to323 with the H pipe and 333 with open headers. Open header made
the most torque. This is
Is this better?
- Original Message -
From:
Larry
Williams
To: [EMAIL PROTECTED]
Sent: Thursday, February 07, 2002 7:28
PM
Subject: [Chevelle-List] The X pipe
Did any of you see the article in March Car Craft about the X pipe
installation on the mustang
Where do get info about the Dr Gas X pipe?
- Original Message -
From:
Kelly C. Hanna
To: [EMAIL PROTECTED]
Sent: Friday, February 08, 2002 5:22
AM
Subject: Re: [Chevelle-List] The X
pipe
At 09:28 PM 02/07/2002, you wrote:
Did any of you see
the article
Replies to this message are sent to The Chevelle Mailing List
My BB has a 5 row with 2 fans on the front, and the mechanical in back, and
it has never overheated in the CA central valley. Use Redline water wetter
as a helper.
Larry
I found the web site Dr Gas. Nice stuff.
- Original Message -
From:
Larry
Williams
To: [EMAIL PROTECTED]
Sent: Friday, February 08, 2002 5:34
PM
Subject: Re: [Chevelle-List] The X
pipe
Where do get info about the Dr Gas X pipe?
- Original
to hear. Anyway, good
luck!
Larry Williams
65 SS 427
- Original Message -
From:
Keith
Cooper
To: [EMAIL PROTECTED]
Sent: Friday, February 15, 2002 11:27
AM
Subject: Re: [Chevelle-List] Popping
Noise
I have removed the valve covers. I have found the
problem
Replies to this message are sent to The Chevelle Mailing List
Bob,
I'm really interested in your test with the X-pipe. Please let us know.
Larry Williams
65 SS BB
- Original Message -
From: Robert Belz [EMAIL PROTECTED
I picked it up and it is good!
Larry Williams
- Original Message -
From:
Steven
Benson
To: [EMAIL PROTECTED]
Sent: Wednesday, February 27, 2002 4:15
PM
Subject: [Chevelle-List] Chevelle
Magazine Winter 2002: Back Issues Now Available!
Ok guys and gals
as I get some
results I'll be sure to post them.
Thanks
Bob
Bob,
I'm really interested in your test with the X-pipe. Please let us know.
Larry Williams
65 SS BB
-
To Unsubscribe please visit www.chevelles.net/list.html
a computer, but will probably answer more
questions thru me.
Larry Williams
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 04, 2002 8:06 AM
Subject: Re: [Chevelle-List] Off topic - 54 Chevrolet
Replies to this message are sent to The Chevelle
Replies to this message are sent to The Chevelle Mailing List
Nice car!
Larry W
- Original Message -
From: michael andrews [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, March 08, 2002 8:27 AM
Subject: Re:
Replies to this message are sent to The Chevelle Mailing List
Ask yourself what you want. ( a show car or a driver). Set a goal and a
plan, and stick to it. Above all, enjoy the process and the car. The guys
on this list have a
Replies to this message are sent to The Chevelle Mailing List
Very close to my home is a car lot called Chuckies Classics. He always has
muscle cars. The web page is www.chuckiesclassics.comIt is located in
central California.
Replies to this message are sent to The Chevelle Mailing List
I have a Mattle Model of the Z16. Is that close enough?
Larry W
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, March 21, 2002
I had a set of Mallory wires on my car and called the factory
to inquire on how to check if they are still good. I was told to check the
resistance with an ohm meter. Those wires were supposed to be 100 ohms per
foot.You have to check with your factory for the spec.
Larry W
65 SS
Replies to this message are sent to The Chevelle Mailing List
Spring fever is really hitting here in the central valley of Calif. It was
close to 75 yeaterday. I'll be dusting off the 65SS this morning for a ride
to work.
Larry W
Dan, I have a 65 Malibu SS and I run 225-70 14s on 8" Cragars.
It fits and doesn't rub.
Larry Williams
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, April 30, 2002 5:17
PM
Subject: [Chevelle-List] tire and wheel
s
I saw a 65 Malibu with 235/50/15s on the rear. I appeared that the
body and frame were not modified. A real fat fit!
Larry Williams
65SS 427
if you want more.
Shipping would probably cost around $1200. Good Luck.
Larry Williams 65 SS BB
- Original Message -
From:
Jake
Trexel
To: [EMAIL PROTECTED]
Sent: Saturday, May 18, 2002 12:40
PM
Subject: [Chevelle-List] disabled needs
advice
I am looking
nd pictures of a car or inspect (nonprofessionally) for you.
Larry Williams
- Original Message -
From:
Jake
Trexel
To: [EMAIL PROTECTED]
Sent: Tuesday, May 28, 2002 8:53 AM
Subject: Re: [Chevelle-List] disabled
needs advice
Hi LarryThank you for your
reply. I
My brother used kerosene to do the job.
Larry Williams
65 SS
- Original Message -
From: Krister Meister [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 08, 2002 1:09 PM
Subject: [Chevelle-List] sticking lifters
Sticking/Clicking/noisy lifters - aside from replacing
65SS
- Original Message -
From:
Chad
Playso
To: [EMAIL PROTECTED]
Sent: Tuesday, July 30, 2002 9:33
AM
Subject: Re: [Chevelle-List] Car
Poll...Favorite Year?
no problem. when I post results tommorrow,
I'm pretty much going to post year favorites and
Saw it for sale in Valley Springs CA this last weekend. If anyone is
interested I will check back to see if it is available and get a number and take
digital pictures. It is a very nice looking car. The sign said $8500
obo.
Larry Williams
65 SS 427
. I built the headers at home, stripped the interior,
and took it to Fremont Drag Strip (Baylands) in Fremont Ca. The car went
13.7 and 105 in the quarter.
Larry Williams
65 SS 427
- Original Message -
From:
Chad
Playso
To: [EMAIL PROTECTED]
Sent: Thursday, August 01
Well I've make it through anotherChristmas
and spent theequivilent to a set of RPM heads, but their not on my 65 SS
yet. Oh well, but my sons willbe happy. I have enjoyed this
list, and you guys are a great bunch.
Merry Christmas.
- Original Message -
From:
Tigergutt
You might want to contact e-bay about this guy.
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 26, 2002 8:30 AM
Subject: Subject: Re: [Chevelle-List] Ebay seller: Noah Performance -
Problem
Just to update everyone:
Still no response from
The Hemi is back. Wait a couple of years when a few
trucks get crashed and those hemis get bought by us hot rodders.
Cool.
- Original Message -
From:
Capt
Crunch
To: [EMAIL PROTECTED]
Sent: Friday, December 27, 2002 8:30
AM
Subject: Re: [Chevelle-List] Non
If you don't get enough pictures of Crager SS's on a 65 Chevelle, I'll send
you pictures of mine.
Larry Williams
- Original Message -
From: gm2 [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, March 28, 2003 11:16 AM
Subject: [Chevelle-List] Cragar SS Rims and look-a-likes
I am
I'm looking for a Gas Tank
Sender for my 65 SS. The last unit
I bought had a 5/16 gas line connection which I converted to a 3/8". What
a pain. Anyone seen the unit with the 3/8
connection?
Thanks Brad. You keep the sender - you might
need it. I'll get one from John.
Larry Williams
65 SS 427
- Original Message -
From:
Brad Waller
To: Larry Williams ; The Chevelle Mailing List
Sent: Sunday, October 05, 2003 7:00
PM
Subject: Re: [Chevelle-list] Gas Tank
Was cleaning my late mother-in-laws belongings out
and found a perfect Chevrolet wooden yard stick. It has a Bow Tie and each
end the words"COUNT ON CHEVROLET TO BUILD THE ONE YOU WANT - '64 CHEVROLET -
CHEVELLE - CORVAIR - CHEVY II - CORVETTE"
I just though it was really co
Have a new e-mail address [EMAIL PROTECTED]
Larry Williams
65 SS 427
If they did, it would be a front wheel drive 6 cyl, single exhaust with K2
ground effects (atleast in this country) But in Australia, it would be an
alum BB 502, 6 sp, rear wheel drive.
Larry Williams
65 SS 427
- Original Message -
From: Pelle Andersson [EMAIL PROTECTED]
To: Chevelle
My neighbor repairs corvette frames. Send him
a message. His name is Bill Grace.
[EMAIL PROTECTED]
Larry Williams
65 SS 427
- Original Message -
From:
Tigergutt
To: 'The Chevelle Mailing List'
Sent: Saturday, January 03, 2004 1:08
PM
Subject: RE: [Chevelle
Just clean it and drive it, save your money, and
buy a new motor when the time comes.
Larry Williams
65 SS 427
- Original Message -
From:
Dave
Studly
To: The Chevelle Mailing List
Sent: Monday, January 12, 2004 8:48
AM
Subject: RE
-1000 looks like a nice unit.
Larry Williams
65 SS 427
- Original Message -
From:
Dan
Knutson
To: The Chevelle Mailing List
Sent: Monday, January 12, 2004 3:19
PM
Subject: Re: [Chevelle-list] best 5 speed
shifter for richmond?
The only thing I know
My Hurst was big, fat and tall. You may not
be able to run a concole.
Larry Williams
- Original Message -
From:
Matthew Post
To: Dan Knutson ; The Chevelle Mailing List
Sent: Tuesday, January 13, 2004 3:20
PM
Subject: Re: [Chevelle-list] best 5 speed
shifter
Congratuations.
Larry Williams
65 SS 427
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 15, 2004 10:13
PM
Subject: Re: [Chevelle-list] PHR
Well done Herb, SEMPER
PARATUS Bob K 71 Elky
.
Larry Williams
- Original Message -
From: Matthew Post [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Monday, January 19, 2004 9:40 AM
Subject: RE: [Chevelle-list] 396 help - cam choice?
Thanks John. You led me right into my next questionwhat to do
or
observations. I still have the original seats on the shelf.
Larry Williams
65 SS 427
57 years old, but not old!
The x pipes seem so expensive. How hard would it be to take two pieces and
have them bent into the right configuration, flare the ends, grind the
holes, weld them together, install braces on the top and bottom, and
install. Too much trouble?
Larry
- Original Message -
From: Brian Zack
Hey enjoy yourself. Spend lots money, eat
lots, and forget all the talk about danger. Use your common sense just
like anywhere else in the world. Have a great time and take lots of
pictures.
Larry Williams
65 SS 427
- Original Message -
From:
Gunner
To: [EMAIL PROTECTED
Go to www.20m.com Thats who I use and its
free. Lots of space for pictures.
Larry Williams
65 SS 427
- Original Message -
From:
65ss.com
To: The Chevelle Mailing List
Sent: Saturday, March 20, 2004 8:04
PM
Subject: Re: [Chevelle-list] How to
Most
Have been using Buick seats in me 65 SS for some time. The electic
mechanism finally crapped. I have the original seats on the shelf, and am
considering redoing them or buying aftermarket seats. Do any of you after
market seats and where did you get them.
Larry Williams
Nice seats. Will check the prices this
week.
- Original Message -
From:
[EMAIL PROTECTED]
To: Larry Williams ; The Chevelle Mailing List
Sent: Sunday, April 04, 2004 5:26
PM
Subject: Re: [Chevelle-list] Seats
Late last year I boughta pair of seats for my '72
Just remember the 454 crank is balanced different than the 427/396.
- Original Message -
From: Bill Lessenberry [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; The Chevelle Mailing List
[EMAIL PROTECTED]
Sent: Tuesday, April 20, 2004 7:31 AM
Subject: Re: [Chevelle-list] Big block crank
At
Good Luck! You will be fine.
- Original Message -
From: Stephen Monjar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 13, 2004 4:46 PM
Subject: Re: [Chevelle-list] It's Alive!!!
Clint,
May your recovery be complete, and your life long and filled with such
pleasures as
I tried to rent a van from U-Haul and was amazed at how unprofessional they
were in Stockton. Went to Enterprise.
- Original Message -
From: Cutter [EMAIL PROTECTED]
To: 'The Chevelle Mailing List' [EMAIL PROTECTED]
Sent: Sunday, May 09, 2004 6:53 AM
Subject: RE: [Chevelle-list] car
speed, etc
Larry Williams
65 SS 427
209-763-5493
Wallace, CA
John, Do you have any headliner trim for a 65 SS
- Original Message -
From: John Nasta [EMAIL PROTECTED]
To: Chevelle List [EMAIL PROTECTED]
Sent: Thursday, May 27, 2004 1:18 PM
Subject: [Chevelle-list] Parts Sale
Just a quick FYI,
Old Car Network is having a spring sale with
Tried to auction my seats on EBay with no luck. They are in complete need
of repair and need a god home. I found a buyer who bid $200., but the
shipping to Alabama cost more than the seats, and he backed out of the
deal.. Anyone interested? Have pictures. Make me an offer. Also have
early
Crappy gas
- Original Message -
From: Stephen Monjar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, May 29, 2004 4:17 PM
Subject: Re: [Chevelle-list] carb problem?
Sticky float? Leaky needle valve? These would be especially noticeable
at
idle and low rpms.
SM
On 5/29/04
Today was my last day at work. Retired at last. I finally have the time to
do those home projects I have been putting off, work on the 65 SS, and play.
Finally! I can do anything I want, when I want.
My payoff check from annual leave will have enough $ left to buy those
aluminum heads I have
Is your engine old? Is your compression low? Is your fuel line close to a
header and vapor locking?
Larry
- Original Message -
From: Pelle Andersson [EMAIL PROTECTED]
To: Chevelle Mailing List [EMAIL PROTECTED]
Sent: Thursday, June 17, 2004 3:14 AM
Subject: [Chevelle-list] Hard to start
. This is
eccentauted by 67 Chevy Caprice parts throughout the living room. Too Cool!
Larry Williams
65 SS 427
How's your compression?
- Original Message -
From: Pelle Andersson [EMAIL PROTECTED]
To: Chevelle Mailing List [EMAIL PROTECTED]
Sent: Monday, June 21, 2004 6:00 AM
Subject: [Chevelle-list] contd... Starting problem
Just before I left the car to the shop I plugged an old
unused gas
Honda sells a grease for use on there sun roof rubber.
Larry Williams
65 SS
- Original Message -
From: John Usher [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Wednesday, June 30, 2004 1:42 PM
Subject: [Chevelle-list] Grease for window regulator tracks
What
Is this the 450 hp version. If it is, smokem!
- Original Message -
From: [EMAIL PROTECTED]
To: Chevelle-list [EMAIL PROTECTED]
Sent: Tuesday, July 06, 2004 1:30 AM
Subject: RE: [Chevelle-list] got myself a birthday present (one more)
yes pics will come as soon as I have them here it
My 65 SS originally had a SB (duh), I changed to a BB, and don't recall
changing the front mounts Are the front mounts different. Is the height of
the engine different? Trying to order headers and this issue came up.
Larry Williams
Thanks Charles.
- Original Message -
From: 65ss.com [EMAIL PROTECTED]
To: Larry Williams [EMAIL PROTECTED]; The Chevelle Mailing List
[EMAIL PROTECTED]
Sent: Monday, July 12, 2004 4:28 PM
Subject: Re: [Chevelle-list] Engine Mount Question
Well, I can answer this one.
http://65ss.com
/4" Jet Hot headers
(Hooker), and a 3" Hedman X pipe kit. All should be here in a
week.
The enginehas a Comp Cams Hyd roller.
Will need to inspect the cam hardware. If all is well, should have it
running in a week or two.
I am excited!
Larry
Williams
Try Air inlet Sys. 905-549-6135
My 65 BB has the same problem. Had to go with a Torker II and a drop air
air cleaner. Sucks!
Larry
- Original Message -
From: Scott Somers [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Tuesday, August 03, 2004 7:54 AM
Subject:
My lit doesn't show the AC wiring diagram. You should try your local
library. Most large muni libraries have a set the repair books. I copied
some info at mine.
Larry
- Original Message -
From: 65ss.com [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Thursday,
I installed Corbeau seats. They come with bases that
bolt in the stock position. They look good but are pretty hard. I
couldn't afford Recaro. http://racing-seats-usa.com
Larry Williams
65 SS
- Original Message -
From:
James Strunk
To: [EMAIL PROTECTED]
Sent
Your e-mail with the photo has a virus.
Larry
Just thought you guys would get a laugh out of this article.
Larry Williams
Sep 22, 7:37 AM EDT
Minn. Trooper Writes 205 Mph Ticket
WABASHA, Minn. (AP) -- With a State Patrol airplane overhead, a motorcyclist
hit the throttle and possibly set the informal record for the fastest
speeding ticket
They caught him.
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, September 22, 2004 10:27
PM
Subject: Re: [Chevelle-list] Off Subject
- Speeding Ticket for 205 mph
Did they actually catch
the guy?
Larry
(Z)
You might want to remove what ever you need to rid your car of the
mice. Theymay chew your wiring next. Or now!
Got a kitty? They love mice.
Larry
Anyone have this combo? Mine is about 10
years old, and will hang up in first if I don't hold it tight against gate
(toward me) during the throw to second. Is it just adjustment or
dirt? The Hurst tech rep said that there is no known defect with the
unit.
Larry Williams
65 SS 427
If all fails try Stockton Wheel, Stockton
CA
www.stocktonwheel.com
- Original Message -
From:
Bill
To: Chevelle-list@chevelles.net
Sent: Wednesday, February 16, 2005 6:51
PM
Subject: [Chevelle-list] 65 Malibu
Wheels
I have a
65' Chevelle. This
I am doing the same thing with my BB. I just
installed a new hyd Comp Cams roller and am using a mechanical advance Mallory
Unilite. Comp Cams help line said that 36 -38 deg total was recommended w/
8 -10 initial for my cam. The cam # is CB 290-R10.TheMallory
is set at 25 deg total advance,
rears restricted 100% (valve all the way
in)to getacceptable front braking.
The front calipers are single piston. It all
worked before I installed the booster. It has good vacuum.
Any suggestions? Copy Dave
Larry Williams
Real dumb question. I have the rear reservoir
on the master cylinder feeding the front brakes. Is this
wrong?
Larry
- Original Message -
From:
Larry
Williams
To: Chevelle-list
Cc: David Hillberry
Sent: Tuesday, March 15, 2005 4:23
PM
Subject: [Chevelle-list
Where is this restrictor in the
drum/drum?
- Original Message -
From:
Wayne
To: Larry Williams ; The Chevelle Mailing List
Sent: Tuesday, March 15, 2005 5:48
PM
Subject: Re: [Chevelle-list] Brakes - 65
Chevelle
Larry willimas wrote "It all worked before
Nice site. Just keep us posted when you make changes.
One thing! Make us Westerners feel good and tell us how much it costs to
fill your chevelle with petrol?
Larry Williams
65 SS 427
- Original Message -
From: André-Tigergutt [EMAIL PROTECTED]
To: 'The Chevelle Mailing List' Chevelle
ounds awesome.
The 427 BB hasEdelbrock RPMs and a new
CompHyd Roller.
Larry Williams
I have an early 90s Unilite distributor, and am
looking someone who has the timing curve calibration tools. If you do, can
you measure the thickness of the tools and post them on the list. I
purchased a kit #29014 but it is for the later model. I think the proper
kit is #29015. It seems
I arrived at the setting at the recommendation of
Comp Cams tech to go with my new hyd CB 290H-R10 roller for my BB.
Actually they recommended 36-38 Deg total and 8 to
10 initial - sorry.
Thanks
Larry
- Original Message -
From:
Dan
To: Larry Williams ; The Chevelle
only.
Thats the way I do it.
Larry
- Original Message -
From:
Dan
To: Larry Williams ; The Chevelle Mailing List
Sent: Saturday, March 26, 2005 7:50
AM
Subject: Re: [Chevelle-list] Unilite
Curve Calibration
Larry,
this may seem like a dumb question
can't got to a cop and ask him to test the
radar gun against the unit. Its illegal to have one in
California.
Any of you guys in law enforcement?
Larry Williams
Public employee in the water pollution field (regulatory industrial
pretreatment and stormwater) for 26 yrs. Retired at 57. Calpers.
65 SS 427
Larry
- Original Message -
From: Herb Lumpp [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Tuesday, April
Try this link http://www.cybermotorcycle.com/euro/brands/benelli.htm Maybe
some can answer your querstions
Larry
65 SS 427
- Original Message -
From: D.R. Jones [EMAIL PROTECTED]
To: chevelle-list@chevelles.net
Sent: Tuesday, April 12, 2005 3:30 PM
Subject: [Chevelle-list] Off
Title: For a living results.
I guess its all relative. I can remember back in
1964 filling my 389 powered 53 Study with 102 octaneCustom Supreme for
.25/gal and making $1.65 an hour.
Larry
65 SS 427
- Original Message -
From:
John Nasta
To: The Chevelle Mailing List
Congratulations!
Kids are cool!
Larry Williams
- Original Message -
From:
Dan
Mascheck
To: 'The Chevelle Mailing List'
Sent: Wednesday, March 30, 2005 3:40
PM
Subject: RE: [Chevelle-list] new addition
to the FIG clan
FANTASTICÂ….I
know
Edelbrock 750
AFB.
It runs great now.
Larry Williams
65SS 427 BB
- Original Message -
From:
John Nasta
To: The Chevelle Mailing List
Sent: Monday, May 02, 2005 10:20 AM
Subject: RE: [Chevelle-list] vacuum
advance hits manifold
Thanks Wayne. I'll
check
Good Luck Clint. You WILL be fine, and on the road again.
Larry Williams
65SS 427
- Original Message -
From: Clint Hooper [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Wednesday, May 04, 2005 4:00 PM
Subject: Re: [Chevelle-list] If it wasn't for bad
.
Anyway! My 65 SS is still the cheapest car to maintain and operate in my
mostly Japanese fleet of Toyota, Acura and Lexus. All of which are very
reliable.
No import will go sideways at 50 mph in second from the torque. Nuf said!
Larry Williams
- Original Message -
From: Krister Meister
Jegs or Summit for Aluminum heads. Or polish
your own heads. Do some homework, and save some money by doing the
labor.
Larry Williams
- Original Message -
From:
RJ
Winkler
To: 'The Chevelle Mailing List'
Sent: Monday, May 09, 2005 5:30 PM
Subject: RE
I'm confused. What have I got? Please
go to http://larrywilliamsstuff.20m.comand
look at the hub caps. What year are they? The stuff on eBay is
different.
Larry Williams
Don't bother buying premium gas as it won't help the performance. Right
guys?
Larry Williams
- Original Message -
From: Dennis Kiernan [EMAIL PROTECTED]
To: Chevelle-list Chevelle-list@chevelles.net
Sent: Wednesday, May 25, 2005 9:04 PM
Subject: [Chevelle-list] mountain passes
I'm
What ever you use - try a X pipe.
- Original Message -
From: Dan Mascheck [EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Monday, May 30, 2005 2:24 PM
Subject: [Chevelle-list] Exhaust
I just bought some Hooker Super Comps from Jet Hot. I have the new ceramic
coating and they
classic Cragers, and plan to go to
Stockton Wheel in Calif for a wider offset rim. So what's out there - what
do you guys use?
Larry Williams
1 - 100 of 376 matches
Mail list logo
