Stus-List Wabasto furness

I need to replace the dosing pump on my Wabasto airtop 3500/ 5000 furness. I can buy a Wasbasto replacement for about $200 or a Chinese one for about $75 on ebay. I am looking for listers feelings about using the knock off pump . Fred Hazzard S/V Fury C 44 Portland, Or

Re: Stus-List Hiller Range Parts...

Sure Marine in Seattle. IIRC Sure Marine purchased left over "obsolete" inventory from several stove manufacturers. The counter staff have been very knowledgeable each time I visit with a pile of old boat parts looking for replacements. Martin DeYoung Calypso 1971 C 43 Seattle [Description:

Re: Stus-List Hiller Range Parts...

Several stove manufacturers use standard burners from Primus, Optimus, etc. In addition to Sure Marine, you might try A Enterprises: http://packstoves.net/cart/index.php?main_page=index=77 Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Dec 15, 2015 at 1:06 PM, David via CnC-List

Stus-List Hiller Range Parts...

Trying to rebuild the surface burners of my three burner Hiller range. Apparently parts are super hard to come by. Anybody have a secret source of parts or have some laying about in their basement? Everything works fine but the burners look a little tough. Thanks in advance... David F.

Re: Stus-List Wabasto furness

The Webasto factory parts we replaced last month (after 16 years of use) returned Calypso's T-90S to "like new" performance. I did not see a "made in China" label on the new burner assembly. Even after the 16 years of use (+-350 hours) the old burner assembly was at an estimated ½ life but we

Re: Stus-List Wabasto furness

Look at all those knock off hoverboards, blowing up like Pintos! Personally, I would get the Wasbasto. If, when you get it, it sez, ‘Made in China’, then I don’t know what to say . . . Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Fred

Re: Stus-List Wabasto furness

no Chinese stuff here if I can avoid it Mike Skywalker 1978 34' -Original Message- From: Bill Coleman via CnC-List To: cnc-list Cc: Bill Coleman Sent: Tue, Dec 15, 2015 1:58 pm Subject: Re: Stus-List Wabasto

Re: Stus-List Refrigeration on C 35 mk III

I used a 2 piece Dometic 12 volt unit with the round evaporator. Mounted the compressor on the bulkhead. Without adding insulation (which I should) I can keep ice cream frozen in the condensor. Joel 35/3 The Office Annapolis On Tue, Dec 15, 2015 at 3:05 PM, Jim Watts via CnC-List <

Re: Stus-List Refrigeration on C 35 mk III

Our installation is a Nova Kool unit, dates back to the original owner. It's a two-part unit with the compressor mounted on the top of the drawer unit in the port lazarette. It's totally out of the way there and the only issue is that it doesn't have a lot of air flow. I'm still considering adding

Re: Stus-List Refrigeration on C 35 mk III

Sam, We put the Coolmatic unit in Perception our 33-II when we added refrigeration. Works great, we added the 120v power supply that uses 120 when available, and 12V when not. Never hear it ... I Have to look and see the fan turning to know it's on! Installation was straight forward, albeit

Re: Stus-List Refrigeration on C 35 mk III; installation photo request

Doug, I would like to see your installation photos... thanks Richard 1985 C 37 CB; Ohio River, Mile 596; Richard N. Bush 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original Message- From: Doug Allardyce via CnC-List

Re: Stus-List Refrigeration on C 35 mk III

Sam, Installing the one-piece kit you referenced would be possible by going through the aft portion of the ice box into the lazarette. That would be the only reasonable position for it. I have my compressor mounted on a shelf next to the bulkhead and ran the Freon lines through the

Re: Stus-List Wabasto furness

Fred – Try it, you’re only out $75 if it doesn’t work. Then with your experience, I’ll be that much smarter when replacing mine. Don’t worry about the technology – fuel pumps are a lot different than a Li battery. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of

Re: Stus-List Refrigeration on C 35 mk III

Just as an alternative, if you have rhe room, Engel has some nice portable DC refrigirators and freezers. Ahmet On Dec 15, 2015 3:14 PM, "Joel Aronson via CnC-List" wrote: > I used a 2 piece Dometic 12 volt unit with the round evaporator. Mounted > the compressor on the

Re: Stus-List Wabasto furness

Is it worth $125 to not worry about a leaking seal on a fuel pump or if it is the correct specs, or will it actually arrive, or I try to avoid cheap chinese crap whenever possible James Delaney 1976 C 38 Oriental, NC From: Pete Shelquist via CnC-List Sent: Tuesday, December 15, 2015 5:22

Re: Stus-List : off topic Skiing

That pass sounds great. Sent from my iPhone > On Dec 14, 2015, at 18:34, Dennis C. via CnC-List > wrote: > > Apologies to the non-skiers on the list. Yeah, $100+ is a bit painful. OTH, > there are bargains available (and we know how much sailboat owners like >

Re: Stus-List : off topic Skiing

If you buy in late summer, you can get four packs of tickets for Copper Mountain for about $160. We got a similar deal from Keystone one year. Jack Brennan Former C 25 Shanachie, 1974 Bristol 30 Tierra Verde, Fl. Sent from my Samsung Galaxy Tab®|PRO Original message From:

Re: Stus-List 1974 C 30-1 keel

I own a 1979 shoal draft version . It's definitely 4'6" deep Sent from Joe Bognar > On Dec 15, 2015, at 10:05 PM, jtsails via CnC-List > wrote: > > There were definitely two keel options on the 1974 30’. The deep draft keel > was 5’ and the shoal draft was 4’ 3”. We

Stus-List 1974 C 30-1 keel

  Looking at a '74 30-1 for sale, and have a question about the keel depth.The ad says the keel is 4'7".Ads for other  30-1s say the keel is 5'.Sailboat data says the keel is 5' , but the profile drawing of the boat on the site shows a dotted line along the keel that looks like it is showing an

Re: Stus-List Water Ingress ??

I had water coming in the bilge pump on my boat the first time out last spring. I could actually go below and see the water coming in through the bilge pump hose while motoring. It stopped when we slowed down. What I have not figured out is why it happened the first time we motored, but not

Re: Stus-List : off topic Skiing

Dennis Glad to see that you are back on your feet again. Even if sliding down a hill on them Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Monday, December 14, 2015 10:34 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List : off topic

Re: Stus-List Refrigeration on C 35 mk III

Sam We have a SeaFrost system on Persistence. It runs with a cold plate that is cooled by running off belts from the boat’s motor. There is also the Shore Power assist which cools the cold plate with AC Shore Power. This type of system may work for you. 1 hour with Seafrost turned on under

Re: Stus-List Refrigeration on C 35 mk III

Hi Sam, I installed the Isotherm 3751SP on Mojito (a 1984 35-3). This is the holding plate version, but is 'passively' water cooled through a heat exchanger in the sink drain. Like others, the compressor (variable speed, so very easy on the batteries) is installed in the lazarette on the

Re: Stus-List Refrigeration on C 35 mk III

My installation by a PO is the Neva Cool, two piece unit too. I did some temporary insulation using mineral wool about 5 years ago. :) Fibreglass is too dusty. Operational routine is to shutdown at night and if the cruise is for more than a weekend then I load a block or two of ice in the

Re: Stus-List 1974 C 30-1 keel

There were definitely two keel options on the 1974 30’. The deep draft keel was 5’ and the shoal draft was 4’ 3”. We owned a shoal draft version. not sure how the ad came up with a 4’7” measurement. James Delaney C 38 1976 Oriental, NC From: andrew rothweiler via CnC-List Sent: Tuesday,

Re: Stus-List replacing a wheel autopilot motor

Nicely done! Dave Message: 1 Date: Mon, 14 Dec 2015 20:46:38 -0500 From: Dreuge To: cnc-list@cnc-list.com Subject: Stus-List replacing a wheel autopilot motor Message-ID: Content-Type: text/plain; charset="utf-8" I just

Re: Stus-List replacing a wheel autopilot motor

Thank you. And I was under impression that this was a reasonable deal… http://www.ebay.com/itm/281165875306?_trksid=p2060353.m1438.l2649 =STRK%3AMEBIDX%3AIT if you could spec out the gear drive, you