It turns out the wire was not connected to a power source! The wire was
good. I have a terminal block for the instruments in the NavPod under the
deck, so I cut the wire, added eye fittings and connected to the power
supply for the GPS. I'm not worried about the power drain of 2 tiny LEDs.
Joel
Joel,
My binnacle light is also wired to the Running Lights (not the ones on the
mast) switch on the panel, just as Jake has described. But in addition,
corrosion on the wires right in the binnacle itself had to be cleaned to get
the lights (2 bulbs) to work.
Eric
Cat's Paw
C&C 35 Mk II
Mattap
n via CnC-List"
To: "Joe Della Barba" , cnc-list@cnc-list.com
Sent: Sunday, July 13, 2014 6:27:37 AM
Subject: Re: Stus-List binnacle light
Don
I don't have a wiring diagram but there is a pull switch. I didn't check for
voltage - yet. Thanks. Hope to see you on the
Maybe same circuit as the running lights or bow light
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel
Aronson via CnC-List
Sent: July 13, 2014 11:42 AM
To: Joe Della Barba; cnc-list@cnc-list.com
Subject: Re: Stus-List binnacle light
Not wired to the pull
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Sunday, July 13, 2014 10:42 AM
To: Joe Della Barba; cnc-list@cnc-list.com
Subject: Re: Stus-List binnacle light
Not wired to the pull switch. That was for the old spotlight. The wire looks
Maryann
Legacy III
1982 C&C 34
Noank, CT
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Sunday, July 13, 2014 6:28 AM
To: Joe Della Barba; cnc-list@cnc-list.com
Subject: Re: Stus-List binnacle light
Don
I don't have a wiring di
;
>
> Joe Della Barba
>
> j...@dellabarba.com
>
> *From:* Joel Aronson [mailto:joel.aron...@gmail.com
> ]
> *Sent:* Sunday, July 13, 2014 6:28 AM
> *To:* Joe Della Barba; cnc-list@cnc-list.com
>
> *Subject:* Re: Stus-List binnacle light
>
>
>
> Don
>
&g
Fair odds the pull switch went bad. Check for voltage on both sides of it.
Joe Della Barba
j...@dellabarba.com
From: Joel Aronson [mailto:joel.aron...@gmail.com]
Sent: Sunday, July 13, 2014 6:28 AM
To: Joe Della Barba; cnc-list@cnc-list.com
Subject: Re: Stus-List binnacle light
Don
arba
>>
>> j...@dellabarba.com
>>
>>
>>
>> Coquina
>>
>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel
>> Aronson via CnC-List
>> *Sent:* Saturday, July 12, 2014 12:02 PM
>> *To:* cnc-list@cnc-list.com
>
lla Barba
>
> j...@dellabarba.com
>
>
>
> Coquina
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com
> ] *On
> Behalf Of *Joel Aronson via CnC-List
> *Sent:* Saturday, July 12, 2014 12:02 PM
> *To:* cnc-list@cnc-list.com
>
> *Subject:* Stus-List binna
d.
Good luck
Don Wagner
C&C 41 CB
Der Baron
West River , MD
From: Joel Aronson via CnC-List
Sent: Saturday, July 12, 2014 12:01 PM
To: cnc-list@cnc-list.com
Subject: Stus-List binnacle light
There is no power to my binnacle light. I've tried every breaker and switch.
No luck.
I can
st@cnc-list.com
Subject: Stus-List binnacle light
There is no power to my binnacle light. I've tried every breaker and switch.
No luck.
I can either trace the wiring back to the breaker or put a red LED in the
navpod above the compass.
Suggestions?
--
Joel
3
There is no power to my binnacle light. I've tried every breaker and
switch. No luck.
I can either trace the wiring back to the breaker or put a red LED in the
navpod above the compass.
Suggestions?
--
Joel
301 541 8551
___
This List is provided by
13 matches
Mail list logo