Re: Stus-List Oil drops in coolant

Peter, I replaced my head gasket 2 years ago. Call if you want to discuss. >From my Android From: CnC-List on behalf of PETER OCAMPO via CnC-List Sent: Friday, August 3, 2018 3:10:50 PM To: cnc-list@cnc-list.com Cc: PETER OCAMPO Subject: Stus-List Oil dro

Re: Stus-List Broken breaker?

Yup. Leave mine on. Just use battery switch. >From my Android From: CnC-List on behalf of Doug Mountjoy via CnC-List Sent: Sunday, August 5, 2018 11:41:59 AM To: cnc-list@cnc-list.com Cc: Doug Mountjoy Subject: Re: Stus-List Broken breaker? Happens, espec

Re: Stus-List [EXTERNAL] Re: How narrow a berth is too narrow

Actually given all this discussion about tough docking. Makes it easier...just put your fenders out and push in. Kind of like we do with inflatables at a dinghy dock. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behal

Re: Stus-List C&C 29-2 Topping Lift Setup Question

I find using hold up the boom the main halyard is a simple solution to eliminating the topping lift and the unsightly boom sag I see on many solid boom vang supported booms. You can also haul down the main sheet for a stable boom when grabbed for balance and your boom vang is not in a constant

Re: Stus-List Water valves

I was surprised to find gate valves on my 1981 40'. I thought C & C would have known better. Replaced them all with proper seacocks. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Dennis C. via CnC-List Sent:

Stus-List Raymarine Instrument Fun

So heading to P-Town and start getting battery low warning from instruments. Batteries are not low per voltmeter. This happened last year once but mysteriously stopped (and was forgotten). This time Autopilot (on same circuit) is "failing" and the other instruments reading wacky or blinking

Stus-List Solar and batteries

So I set up my 50 watt solar panel and controller and when I come aboard the boat the batteries are reading 13.1 13.2. I thought a battery at rest read 12.7 fully charged. Even now at sunset they are reading over 13. Is my controller cooking the batteries? Thanks in advance. >From my Android

Re: Stus-List Long Island

I grew up in Melville. Try The Vanderbilt Museum in Northport >From my Android From: CnC-List on behalf of Dennis C. via CnC-List Sent: Thursday, August 30, 2018 1:46:10 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Long Island I'll be in the Melvi

Re: Stus-List FWD: 2018 C&C Northeast Rendezvous -- The Details (Registration Closes Friday, 3:00p)

To all those attending.the 2018 Rendezvous. Have a great time. We would.live to be there but for the inconvenience of.a wedding in September (WTF!). To adequately thank Edd for all of his hard work, and don't tell I said this, is to offer him, neigh, insist, on he having lots and.lots of Tequ

Re: Stus-List Holding tanks

White PVC is gas permeable? >From my Android From: CnC-List on behalf of Dave via CnC-List Sent: Saturday, September 1, 2018 5:47:38 AM To: kasel...@q.com Cc: syerd...@gmail.com; cnc-list@cnc-list.com Subject: Re: Stus-List Holding tanks Dave, On my 33-2

Re: Stus-List Deck core repair advice sought

A "Lawn-Guy-Lander" being irascible? Never happen >From my Android From: CnC-List on behalf of Josh Muckley via CnC-List Sent: Friday, August 31, 2018 10:03:18 PM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List Deck core repair advice sought I kn

Re: Stus-List 3D File

DING DING DINGYou won the prize. Was wondering how long that would take. >From my Android From: CnC-List on behalf of Greg Arnold via CnC-List Sent: Wednesday, September 5, 2018 5:25:23 PM To: cnc-list@cnc-list.com Cc: Greg Arnold; Rob Ball Subje

Stus-List Rob Ball

Congrats Rob!Hope to see you on the Bay. David F. Risch 1981 40-2 Corsair >From my Android ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - us

Re: Stus-List Test

Dud we pass...? >From my Android From: CnC-List on behalf of Brian Carpenter via CnC-List Sent: Sunday, September 9, 2018 4:58:50 PM To: cnc-list@cnc-list.com Cc: Brian Carpenter Subject: Stus-List Test Test [emwd_cloud_email] Brian Carpenter Owner Prov

Stus-List Instruments...

My son's friend is trying to add instruments to his boat. Any spares for sale out there? Thanks in advance. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]

Re: Stus-List Instruments...

Instruments... I have a Signed marine wind. And in a couple of months a Data marine set. Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. Original message From: David via CnC-List Date: 9/10/18 05:42 (GMT-08:00) To: CNC CNC Cc: David Subject: Stus-List Instruments... My

Re: Stus-List Nice day sail

Thats me in orange... >From my Android From: CnC-List on behalf of Marek Dziedzic via CnC-List Sent: Monday, September 17, 2018 8:57:03 AM To: cnc-list@cnc-list.com Cc: Marek Dziedzic Subject: Re: Stus-List Nice day sail Are you talking about around 1:42?

Re: Stus-List 1982 C&C 25

Roger, Good luck with your search. No opinion on the boat but lots of experience with outboards hung on transoms. If you are sailing in relatively calm waters they are fine. In any kind of a seaway, however, all you will get is lots o' noise with very little thrust at a time you probably ne

Stus-List Fridge Fan

My fridge temp swings 10 degrees (34-43) even with tweaking thermostat. Thermostat or air circulation (its a fairly new thermostat)? I assume one of you have installed a muffin fan. Did it work and how do you mount is so it was out of the way but moving air efficiently? Thanks in advance

Re: Stus-List Insurance

Rick...can you call me? Thanks. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Rick Brass via CnC-List Sent: Thursday, September 20, 2018 9:33 AM To: cnc-list@cnc-list.com Cc: Rick Brass Subject: Re: Stus-List

Re: Stus-List Fridge Fan

WLYC 2011 Bighorn 3185RL Fifth Wheel, the COW (Condo on Wheels) 2010 Ford F-350 SD, 6.4L Powerstoke Diesel, BART (Big Ass Red Truck) On 9/19/2018 5:29 PM, David via CnC-List wrote: My fridge temp swings 10 degrees (34-43) even with tweaking thermostat. Thermostat or air circulation (its a fair

Re: Stus-List 37+ Rudder Bearing

I did the same thing. In fact I got it back on by myself... David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Gary Russell via CnC-List Sent: Monday, September 24, 2018 1:44 PM To: C&C List Cc: Gary Russell Subject

Stus-List Refinishing Table ...

Hello, I am taking out my cabin table from my 81' 40- 2 to refinish this winter. Anybody refinish one? Thanks in advance. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]

Re: Stus-List Refinishing Table ...

Portland Or On Mon, Sep 24, 2018 at 12:48 PM David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hello, I am taking out my cabin table from my 81' 40- 2 to refinish this winter. Anybody refinish one? Thanks in advance. David F. Risch, J. D. Gulf Stream Associates, LLC

Re: Stus-List Refinishing Table ...

wburtonyachtservices/ +401 965-5260 On Sep 24, 2018, at 16:21, David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Thanks Andy...I would like to dissemble it to do it right, but I fear it is all glued together and must be refinished assembled. David F. Risch, J. D. Gulf Stream Assoc

Re: Stus-List Cutlass bearing

Easier than that. I just uncoupled the shaft at the tranny and removed flange. Slid shaft forward... David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Joel Aronson via CnC-List Sent: Monday, September 24, 2018 5

Re: Stus-List CnC-List Digest, Vol 152, Issue 76 Tree Trimming

The process is to call your insurance company who will deal with you on the claim. They then will contact the yards insurance company to recover what they can. As someone else said...change yards/boat carrier.That is really lame. David F. Risch, J. D. Gulf Stream Associates, LLC (401)

Re: Stus-List C&c40 -2 std rig main sail

Peter call me... >From my Android From: CnC-List on behalf of PETER OCAMPO via CnC-List Sent: Tuesday, September 25, 2018 12:57:57 PM To: cnc-list@cnc-list.com Cc: PETER OCAMPO Subject: Stus-List C&c40 -2 std rig main sail Hello all Before I put in an ord

Re: Stus-List C&c40 -2 std rig main sail

Peter if you don't want headsails i might... >From my Android From: CnC-List on behalf of PETER OCAMPO via CnC-List Sent: Wednesday, September 26, 2018 6:15:14 AM To: cnc-list@cnc-list.com Cc: PETER OCAMPO Subject: Re: Stus-List C&c40 -2 std rig main sail

Re: Stus-List Rob - C&C long time question

Purchased Corsair (1981 40-2) in 2004. Will never sell her and will pass along to my son. I may buy another boat for the south however. FYI...began as a fore-deck monkey on a 1972 35. Then the owner bought a 38 (Golden Peace on Long Island Sound). He then went on to buy a 40 after I moved

Re: Stus-List Ventilation -vetus?

Two quick thoughts. Anchor lockers and their rode pick up a lot of stuff and can smell. Anchor lockers have been known to flood in a seaway. The vent between cabin and locker may allow fumes and water into cabin. >From my Android From: Dave S via CnC-List Sent: Sunday, September 30, 1

Stus-List Mold prevention

Boat is ventilated ( not dehumified) and bulkheads clean but we get this light patina of easily removed mold on a regular basis. Is there a solution to prevent regrowth or is that the TSP bleach water solution to clean same. >From my Android

Re: Stus-List Mold prevention

&C 33 SLY Sent from my iPad On Sep 30, 2018, at 6:58 AM, David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Boat is ventilated ( not dehumified) and bulkheads clean but we get this light patina of easily removed mold on a regular basis. Is there a solution to prevent regrowth

Re: Stus-List Tank level indicators

Fred...shoot me an email @ davidrisc...@msn.com. Thanks! David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Frederick G Street via CnC-List Sent: Tuesday, October 2, 2018 5:10 PM To: Glenn Henderson via CnC-List Cc:

Re: Stus-List Rob - C&C long time question

http://www.tpicomposites.com/English/the-TPI-family-honors-the-memory-of-our-founder/default.aspx >From my Android From: CnC-List on behalf of Bill Coleman via CnC-List Sent: Wednesday, October 3, 2018 5:21:05 PM To: cnc-list@cnc-list.com Cc: Bill Coleman S

Re: Stus-List Navtec Backstay (IA-10) - Rebuild or Replacement?

Tom...find a hydraulic shop for trucks. Navtec guys are 4x the cost and in my case, incompetent. Construction guys don't do well with incompetent. >From my Android From: CnC-List on behalf of ALAN BERGEN via CnC-List Sent: Thursday, October 4, 2018 11:05

cnc-list@cnc-list.com

Don, This is impressive. Thank you! Please change Corsair to a MA as a state. >From my Android From: CnC-List on behalf of T power via CnC-List Sent: Friday, October 5, 2018 5:03:43 PM To: cnc-list@cnc-list.com Cc: T power Subject: Re: Stus-List Update to

Re: Stus-List 30 MKII for sale in CT at a very reasonable price.

Back on the market? David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Robert Gallagher via CnC-List Sent: Monday, October 8, 2018 9:18 AM To: cnc-list@cnc-list.com Cc: Robert Gallagher Subject: Stus-List 30 MKII fo

Re: Stus-List 30 MKII for sale in CT at a very reasonable price

Have him contact me. I might have one for him... >From my Android From: CnC-List on behalf of Robert Gallagher via CnC-List Sent: Monday, October 8, 2018 10:34:18 AM To: cnc-list@cnc-list.com Cc: Robert Gallagher Subject: Re: Stus-List 30 MKII for sale in

Re: Stus-List Slow use of coolant.

Bruce. Fond the highest point with a hose and.pour.coolant in there. You will be surprised how much it will take. On my 3QM it is the heater house feed to heater. >From my Android From: CnC-List on behalf of Ronald B. Frerker via CnC-List Sent: Monday,

Stus-List Refinishing table and sole...

So I am refinishing the table and have removed the aluminum corner pieces to re-paint. As the original paint is in fairly good shape with only bits of bare aluminum, still need primer? Preferred top coat paint? And I know this subject has been beaten to death. Sorry, but a varnish recommend

Re: Stus-List C&C 26' or 27'?

Whether its a 30 or 27 or 26. Have patience with looking. Someone in the next town gave away a decent 30' to a deserving family who would use and love the boat as it was by its original owner. Its not always the money. With that in mind look for the best whatever footage (me? go for the 30,

Re: Stus-List Solar panels and LED light bulbs.

Had a 80 amp Balmar for 12 years. Buy their smart charger. Flawless performance. >From my Android From: CnC-List on behalf of Dennis C. via CnC-List Sent: Saturday, October 13, 2018 5:46:52 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Solar panels

Re: Stus-List Lithium Batteries LiFe vs Lipo

Plus 1 >From my Android From: CnC-List on behalf of Della Barba, Joe via CnC-List Sent: Wednesday, October 17, 2018 10:01:12 AM To: cnc-list@cnc-list.com Cc: Della Barba, Joe Subject: Stus-List Lithium Batteries LiFe vs Lipo I would ditch the 27s and repla

Stus-List Galley countertop

Love my 1981 40, but I am so tired of the teak countertops in the galley. Has anybody laid on top of the teak a formica like substance to lighten up the galley? >From my Android ___ Thanks everyone for supporting this list with your contribution

Re: Stus-List Galley countertop

ity Island, NY www.StarshipSailing.com<http://www.StarshipSailing.com> --- 914.774.9767 | Mobile --- Sent via iPhone X iPhone. iTypos. iApologize On Oct 17, 2018, at 5:59 PM, David via CnC-List mailto:cnc-list@cnc-lis

Re: Stus-List Galley countertop

Associates, LLC (401) 419-4650 From: CnC-List on behalf of Frederick G Street via CnC-List Sent: Thursday, October 18, 2018 8:52 AM To: David via CnC-List Cc: Frederick G Street Subject: Re: Stus-List Galley countertop For my boat (1979 Landfall 38), the Wilsonart

Re: Stus-List Whale foot pump for icebox

IMHO...there is enough stuff that can get into the bilge without adding one more, potentially gross, variable which can cause hard to get rid of odors. I configured my foot pump so it can pump fresh water, salt water, or icebox water into the sink. David F. Risch, J. D. Gulf Stream Associates

Re: Stus-List Af Cabin Mirror on a 37+

On behalf of Rob and myself and your mirrored aft cabin...so may jokes...so little time. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ___ Thanks everyone for supporting this list with your contributions. Each and every one is g

Re: Stus-List Af Cabin Mirror on a 37+

My mirror was replaced with a reflective acrylic. Looks like glass >From my Android From: CnC-List on behalf of Matthew L. Wolford via CnC-List Sent: Friday, October 19, 2018 4:08:31 PM To: cnc-list@cnc-list.com Cc: Matthew L. Wolford Subject: Re: Stus-Lis

Re: Stus-List Air conditioner placement

At the risk of being a smarta$$. Do you really need A/C up there at all? We never feel the need for it here in the Cape Cod and Islands area. Save you some storage, money and time getting rid of it. >From my Android From: CnC-List on behalf of Ken Heato

Re: Stus-List Looking for a cruising chute

L-36.com is. Compiler of many sites. Good start. >From my Android From: CnC-List on behalf of Bruce Whitmore via CnC-List Sent: Monday, October 22, 2018 9:41:38 PM To: C&C List Cc: Bruce Whitmore Subject: Stus-List Looking for a cruising chute Hello all,

Stus-List Pressure Testing water lines...

Was going to hook up a garden sprayer to each individual water line to determine if and where there are any leaks. May need a gauge to really measure. Any suggestions? David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick

Re: Stus-List Pressure Testing water lines...

Subject: Re: Stus-List Pressure Testing water lines... Wear your foulies… 🙂 — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Oct 23, 2018, at 1:46 PM, David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Was going to

Re: Stus-List diesel engine staring procedure

Yup same with 3QM30. Always starts. Half throttle and quickly modulate upon starting. Cold or otherwise with no glow plug. >From my Android From: CnC-List on behalf of Jeremy Ralph via CnC-List Sent: Tuesday, October 23, 2018 6:16:20 PM To: cnc-list@c

Re: Stus-List Repainting Waterline Stripe...

7 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit On Sep 20, 2016, at 10:03 AM, Joel Aronson via CnC-List wrote: David, I would check with the manufacturer to see what you can use over AwlGrip. On Tue, Sep 20, 2016 at 9:59 AM, David via CnC-List wrote: Nei

Stus-List Taz...?

Anybody know her? She is from Hadam, CT Thanks in advance David F. Risch (401) 419-4650 (cell)cnc ___ This list is supported by the generous donations of our members. If you like what we do, please help us pa

Re: Stus-List Sundowner is for sale

Petar, There is one one three moorings over. Been admiring it for years... David F. Risch 1981 40-2 (401) 419-4650 (cell) To: cnc-list@cnc-list.com Date: Mon, 26 Sep 2016 13:50:18 -0400 Subject: Re: Stus-List Sundowner is for sale From: cnc-list@cnc-list.com CC: phorv...@gmail.com Yes, I went

Re: Stus-List Birds

We too have bird problems... I tie fishing line from VHF antennae to tri-color to anemometer to Windex. I also have three lengths of fishing line emanating from the base of the 4 spreaders to the shrouds in increasing height. Seems to work. I will also add pins to spreaders as well. David F.

Re: Stus-List Birds

affect spinnaker if there was a slightly messy douse. Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent: Friday, September 30, 2016 10:42 AM To: CNC CNC Cc: David Subject: Re: Stus-List Birds We too have bird problems... I tie fishing

Stus-List Cockpit Locker Leak...

Does anyone else get water in their cockpit locker? I don't see how it can get in there from the basic design. It seems to be damp in there most times and it makes no sense. Thanks in advance David F. Risch 1981 40-2 (401) 419-4650 (cell) ___

Stus-List Inverter to Outlet Via Extension Cord?

We have minimal inverter needs and would like to wire the 1000w inverter directly to a dedicated outlet. It does not have power outputs but two receptacles for plugs. I believe I can wire an extension cord to a outlet (assuming adequately rated and quality components), but I would like to kno

Re: Stus-List re Inverter to Outlet Via Extension Cord?

Derek, I went online to determine if that was possible. Nuthin'. Thank you very much for that information. Sent from my Verizon 4G LTE smartphone Original message From: Tortuga via CnC-List Date: 10/23/16 20:37 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Tortuga Subject: S

Stus-List Painting Hulls and Now Rolling and Tipping...

So I was re-painting my tired and mooring abused waterline stripes. Killed myself sanding and prepping. Watched videos on rolling and tipping. Bought a high-end brush and armed with a quality foam roller went to work applying the Brightside. Leaving out the self imposed debacle of coat one

Stus-List Not the Head Gasket...?

...but probably is, but thought I would ask anyway. Took off the exhaust manifold and started cleaning out the injection elbow. More clogged than I would have thought (was cleaned out years ago). But it was. Not hard pack, as also reflected by the seemingly normal visual water-flow out of

Stus-List Floorboard gap fillers

I know it was discussed before. But I cannot remember the solution and I am tired of the gaps collecting dirt. What was the solution? Thanks in advance. David F. Risch 1981 40-2 (401) 419-4650 (cell) ___ This list is supported by the generous do

Re: Stus-List Battery Charges and an ACR

Edd, I have a Balmar Smart Charger to the house bank and its Duo Digital charging the start battery from house bank. Flawless performance for over 10 years. Less wires too... David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of Edd Schillay vi

Re: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail replacement?)

Martin, You own X Dimension? she was one of 2 43s owned by my friends who kept them here in Marion. If you have any questions I can pass them on. Sent from my Verizon 4G LTE smartphone Original message From: Violeta Ivanova via CnC-List Date: 11/14/16 22:34 (GMT-05:00)

Re: Stus-List C&C 40 1983 rudder bearing

Peter...Call my cell 401 419 4650 Sent from my Verizon 4G LTE smartphone Original message From: Andrew Burton via CnC-List Date: 11/17/16 10:49 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Andrew Burton Subject: Re: Stus-List C&C 40 1983 rudder bearing Hi Peter, Coincidental

Stus-List Head Removal...no what.

So the head is off the boat (big thanks to fellow lister and Boat Yard Buddy Danny) and in the basement awaiting delivery for the re-build. What beside vacuuming out the cylinders (of the head's bolts dust) should I be doing to the top of the block? Sand it while protecting the cylinders? An

Re: Stus-List Inverter to Outlet Via Extension Cord?

So I know enough to know to be careful and decided to isolate the inverter to its own dedicated newly installed plug. Properly wired and chassis grounded as well. Its all we will need. Thanks for everyone's input. David F. Risch (401) 419-4650 (cell) From:

Re: Stus-List Looking at C&C 37/40+ CB as next boat

Errr...what is a "hand hole"? Sent from my Verizon 4G LTE smartphone Original message From: Josh Muckley via CnC-List Date: 12/4/16 19:44 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Josh Muckley Subject: Re: Stus-List Looking at C&C 37/40+ CB as next boat My holding tank is

Re: Stus-List Rewiring mast and anchor light..

FYI My tricolor lights the windex just fine Sent from my Verizon 4G LTE smartphone Original message From: Joel Aronson via CnC-List Date: 12/9/16 11:07 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Re: Stus-List Rewiring mast and anchor light.. I plan to

Re: Stus-List $750 at Fisheries Supply - what to buy?

Autopilot is my best friend. Sent from my Verizon 4G LTE smartphone Original message From: Andrew Means via CnC-List Date: 12/19/16 6:08 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Andrew Means Subject: Re: Stus-List $750 at Fisheries Supply - what to buy? I feel like I s

Re: Stus-List Merry Christmas

Merry Christmas to Stu, and friends met and unmet. Sent from my Verizon 4G LTE smartphone Original message From: Kurt Heckert via CnC-List Date: 12/25/16 5:43 PM (GMT-05:00) To: cnc-list@cnc-list.com, cnc-list@cnc-list.com Cc: Kurt Heckert Subject: Re: Stus-List Merry Chris

Re: Stus-List Fwd: Navtec 10 Series 7

I took mine to a truck repair shop after I paid a "Navtec Approved" repair shop $500 only have it fail again in 14 months...no warranty so I was stuck with another large bill. Didnt trust the repair so before going offshore brought it to the truck shop to inspect and test. What cost $500 wo

Re: Stus-List Fwd: Navtec 10 Series 7

that Tri-Power in Warwick? On Friday, December 30, 2016 12:49 PM, David via CnC-List wrote: I took mine to a truck repair shop after I paid a "Navtec Approved" repair shop $500 only have it fail again in 14 months...no warranty so I was stuck with another large bill. Didnt trust

Re: Stus-List Solvent for cleaning winches indoors?

So is it necessary to clean the parts with a soup solution after cleaning with kerosene...? Sent from my Verizon 4G LTE smartphone Original message From: Home via CnC-List Date: 1/18/17 11:27 AM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Home Subject: Re: Stus-List Solvent

Re: Stus-List CnC-List Digest, Vol 132, Issue 37

Reason why I ask is that the aluminum barient at the base of the mast (forward) constantly needs attention. Gets all mucked up every 2 years after a good cleaning and greasing. Perhaps it's my not cleaning the parts after solvent? Sent from my Verizon 4G LTE smartphone Origina

Stus-List Free 1976 33

FYI...In craigslist in New London,Ct https://newlondon.cr...5945347018.html Sent from my Verizon 4G LTE smartphone ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, plea

Re: Stus-List C&C 37/40+ Universal M-35 heat exchanger

Congratulations and food luck!!! Sent from my Verizon 4G LTE smartphone Original message From: Mark Baldridge via CnC-List Date: 2/15/17 12:48 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Mark Baldridge Subject: Stus-List C&C 37/40+ Universal M-35 heat exchanger Bruce W. i

Stus-List Autopilot control head

Does anybody have a use autopilot control head that they want to sell? Thanks in advance Sent from my Verizon 4G LTE smartphone ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our cos

Re: Stus-List Autopilot control head

pilot control head What brand a model Sent from my iPad On Feb 20, 2017, at 12:12 PM, David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Does anybody have a use autopilot control head that they want to sell? Thanks in advance Sent from my Verizon 4G LTE

Re: Stus-List Autopilot control head

, WI :^( On Feb 20, 2017, at 4:00 PM, David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Any brand. It's an old ram and any old Control head should work? No networking set. Sent from my Verizon 4G LTE smartphone Original message From: Home via CnC-List mail

Re: Stus-List Input on inflatable dinghy purchase

Andy, Do you know how much he wants for the rig? David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of Andrew Burton via CnC-List Sent: Wednesday, March 1, 2017 4:55 PM To: cnc-list@cnc-list.com Cc: Andrew Burton Subject: Re: Stus-List Input on i

Re: Stus-List C&C 24 spinnaker project

David, Welcome and have you inquired as to buying raw aluminum tubing and transferring your fittings? The 6" deficit wont be a big deal, but hell...its yours! Go grab it! Enjoy! David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of David Cad

Re: Stus-List Automatic Bilge Pump? Recommendations?

If you have a catastrophic failure good batteries and luck (attentive neighbors?) will save her on the mooring. If you have bilge pump counter on an automatic telling you the pattern of pumps per time period left unattended, you may see a problem before it gets out of hand. And hardwired to

Re: Stus-List Hidea Outboard Motor

Buy a used 2 stroke Tohatsu or Nissan. Never look back. David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of johnr via CnC-List Sent: Wednesday, March 8, 2017 2:11 PM To: cnc-list@cnc-list.com Cc: johnr Subject: Stus-List Hidea Outboard Motor D

Re: Stus-List Hidea Outboard Motor

adigm Shift C&C 35 Mk III Victoria, BC On 8 March 2017 at 16:50, johnr via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Just a quick observation. Those of us here on the Hudson have pretty much abandoned 2 stroke motors from environmental concerns. Cheers, John McL C&C29-2 F

Re: Stus-List Navtec Backstay Adjuster

Find a truck repair hydraulic shop. "Yacht Shoppes" charge 5x and in some cases do crappy work to boot. I spent $1000 on a $100 figuring that out. Sent from my Verizon 4G LTE smartphone Original message From: Steve Hood via CnC-List Date: 3/24/17 5:21 PM (GMT-05:00) To:

Stus-List Removing Starter...

So the head is off of the 3QM30 and while everything is apart I am rebuilding all the peripherals...including the starter. Access to the starter seemed good. Until it was not. Cannot get a socket on there and swing room for a box wrench is limited and geometry awkward. Aside from cutting a

Re: Stus-List CNCRDV

Yeawhat he said! Sent from my Verizon 4G LTE smartphone Original message From: Edd Schillay via CnC-List Date: 4/18/17 10:31 AM (GMT-05:00) To: C&C List Cc: Edd Schillay , Tom Buscaglia Subject: Re: Stus-List CNCRDV Tom, Nice site — but suggest you make it “bootstrap

Stus-List Yanmar Hand Starting Handle

Hello all...trying to source a hand starting handle for my Yanmar 3qm30 so I may adjust my valves when the head goes back on. Tried the net to no avail. Perhaps one of you has an extra one hanging around for purchase (or short-term lease)? Thanks in advance. David F. Risch (401) 419-4650 (

Re: Stus-List CnC-List Digest, Vol 135, Issue 80

-803-5220 On Apr 20, 2017 3:18 PM, "David via CnC-List" wrote: Hello all...trying to source a hand starting handle for my Yanmar 3qm30 so I may adjust my valves when the head goes back on. Tried the net to no avail. Perhaps one of you has an extra one hanging around for purchase (

Re: Stus-List Yanmar Hand Starting Handle

Handle Another approach, if the front pulley is accessible, is to put a deep socket on the nut holding the pulley to the crankshaft, then use a socket wrench or a breaker bar to rotate the engine. Neil Gallagher Weatherly, 35-1 Glen Cove, NY On 4/20/2017 6:17 PM, David via CnC-List wrote

Stus-List Frameless Head hatch...

I am attempting to refurbish my Atkins & Hyle frame-less head hatch (15" x 8" oval) and I am trying to source the hinges. They are not listed on the A & H website as available parts. Any thoughts as to where they may be found? Thanks in advance. David F. Risch (401) 419-4650 (cell) ___

Re: Stus-List Yanmar Hand Starting Handle

Weatherly, 35-1 Glen Cove, NY On 4/22/2017 1:09 PM, David via CnC-List wrote: Neil,, That worked great thanks! David F. Risch (401) 419-4650 (cell) From: CnC-List <mailto:cnc-list-boun...@cnc-list.com> on behalf of Neil Gallagher via CnC-List <mail

Re: Stus-List Frameless Head hatch...

Aronson Subject: Re: Stus-List Frameless Head hatch... I would email 'Bryan AtkinsHe is pretty helpful Joel On Sat, Apr 22, 2017 at 1:17 PM David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I am attempting to refurbish my Atkins & Hyle frame-less head hatch (15"

Re: Stus-List C&C Rendezvous - June, 2017 - St. Georges Bermuda

ed Street and Jim Schwartz from the C&C list are among my crew. I thought I’d see if our times in Bermuda might overlap, and we might get together for a Dark & Stormy. Rick Brass Imzadi C&C 38 mk 2 la Belle Aurore C&C 25 mk1 Washington, NC From: CnC-List [mailto:cnc-list-boun...@cn

Re: Stus-List Replacement hinges 35mkIII

Jim, Did you want to sell the extra? I need just one. David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of Indigo via CnC-List Sent: Tuesday, May 16, 2017 9:40 AM To: cnc-list@cnc-list.com Cc: Indigo Subject: Re: Stus-List Replacement hinges 3

<    1   2   3   4   5   6   >