Stus-List Re: Insurance…add international races with paid crew

I’m rejuvenating this conversation and highlighting a specific need for a friend of mine. They plan to race the boat internationally from Miami to Nassau.  They also plan to have one or two paid crewmembers on board . Evidently that last sentence is a bit of a stickler

Re: Stus-List Heavy weather sail trim

I’m curious how many have and use a Jib-Top? Worth it? From: CnC-List On Behalf Of Don Kern via CnC-List Sent: Thursday, June 20, 2019 8:17 PM To: cnc-list@cnc-list.com Cc: Don Kern Subject: Re: Stus-List Heavy weather sail trim Ron Fireball carries four head sails when racing

Stus-List 37 Northern Lights

Maybe just coincidence, but there's a 37 named Northern Lights for sale in WI for $50k. http://barkers-island-marina.com/yacht-details/?boatID=6847626 -Original Message- From: CnC-List On Behalf Of robert via CnC-List Sent: Thursday, April 25, 2019 7:33 AM To: John Christopher Cc:

Re: Stus-List Broken shift cable

The cable should have a part number on it. I'm told that number will be everything you need to know for replacement. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to

Stus-List R flex coupling

I need to replace my prop shaft/coupling and am considering the addition of an R flex coupling. Anyone have experience if they provide the reduction in noise/vibration as advertised? ___ Thanks everyone for supporting this list with your

Re: Stus-List Rudder Shaft Material

Bill – Are you applying online? Rudder type is on the form, but I don’t recall seeing a question on the shaft FWIW – my ’84 37 is solid and, assuming it’s original, would bet money yours is too. With rudder shaft specs alone it’s such a minor impact that A) It doesn’t justify asking

Re: Stus-List Prepping for 35-1 Keel Bolts/Smile Fix

To expand on Tom’s note below, I have a few additional questions for this crowd; With anticipation of doing some offshore races in our area this summer, I pulled my mast last fall to tighten up all the keel bolts. After only a couple years, they were surprisingly loose. Quick

Stus-List hand held VHF with DSC

Long story, but our local racing fleet has made a requirement that a boat must carry a handheld VHF with DSC for offshore. Admittedly, I haven’t looked into this yet, but my question to this crowd is; I already have an issued MMSI number for the boat’s AIS, is it smart to use that same

Re: Stus-List DX900+

Bill – Just in case you haven’t already seen this one, here’s an article w/comments that is relatively current. Additional links buried in there too. https://www.panbo.com/airmar-2018-part-2-ultrasonic-and-em-speedo-mysteries-unraveled-plus-new-udst800/ Let me know if you hear anything

Re: Stus-List 1974 36 mk2 questions

I wouldn’t compare the 26 to a MacGregor. It sounds like you need to get out sailing different boats more to help you decide what’s important, or not. From: CnC-List On Behalf Of Shawn Wright via CnC-List Sent: Thursday, January 10, 2019 11:13 AM To: cnc-list@cnc-list.com Cc:

Re: Stus-List Question for Fred and others - Smart Watch apps & connectivity

RaceQs runs on the Garmin Vivoactive, but it appears they are moving over to Apple Watch Or you can go with something preloaded from garmin. At first blush is appears the sailing apps are similar, but Quatix definitely has more and it’s currently on sale :

Re: Stus-List 35-3 Upper (inner?) Genoa Track

Luke - I use the inner track for my light #1. it's a bit of a nuisance since the car is not easily adjustable like the primary jib cars. I still like it and believe it gives us a little more point. to change jib cars to the primary track, either for the same sail or a headsail change, just

Re: Stus-List 1990 37+/40 For Sale [Not Mine!]

I can validate Fred’s comment.  Totally.  Get Outlook for iOS On Thu, Dec 6, 2018 at 11:35 AM -0600, "Matthew L. Wolford via CnC-List" wrote: Don’t sugar-coat it, Fred.  Tell us what you really think.   From: Frederick

Re: Stus-List Shackle for Genoa sheets

Matthew-  what did you use for a mast fitting at the top of your babystay line? Get Outlook for iOS From: CnC-List on behalf of Matthew L. Wolford via CnC-List Sent: Thursday, November 8, 2018 7:17 AM To: cnc-list@cnc-list.com Cc: Matthew

Re: Stus-List Folding Propeller

Wade- FWIW- I have yanmar 3HMF with 2.14 ratio transmission and flexofold recommended a 2 blade 16x11.  It's worked very well the last 10 yrs.  Get Outlook for iOS

Re: Stus-List Barient 28 two speed self tailing winch bearings

I have a pair of barient 28s I’ll sell you to use for parts Get Outlook for iOS On Wed, Jul 4, 2018 at 3:44 PM -0500, "Glenn Gambel via CnC-List" wrote:

Stus-List Partnership creation

For a variety of reasons I’m considering starting a partnership with my Boat. In light of other conversations about buyout, etc. does anyone have suggestions, or sample contracts, I can use to make the relationship manageable ? ThxPete

Re: Stus-List hydraulic backstay

Dan- I have Sailtec backstay that is completely self contained.  The factory told me to bring it inside in the winter and store it vertically. Something to consider once yours is repaired.

Re: Stus-List Resleeving winches

Mike - Lucky for you I have a pair of 28s for sale! From: CnC-List on behalf of mike amirault via CnC-List Sent: Friday, March 16, 2018 3:00 PM To: cnc-list@cnc-list.com Cc: mike amirault Subject: Stus-List

Stus-List Selden sprit for sale!

For sale:  Alum 87mm x 7.5ft. Selden sprit Inboard pad eye and 2x outboard fittings (rings etc). You can haveall the extra hardware I had custom made.  $450 obo + shipping Get

Re: Stus-List Handicapping Sprite and/or pole. Was Adding asym sail/sprit to C 36

FWIW- I have a selden sprit for sale if anyone is interested.    Email me for details. Get Outlook for iOS On Thu, Feb 1, 2018 at 8:50 AM -0600, "Charles

Stus-List Nexus Race

Anyone run Nexus Race?  And tie in with instruments? Get Outlook for iOS __ ___ Thanks everyone for supporting

Stus-List c 37

The Trans-Superior race is starting this weekend in Sault Ste Marie, Ont and finishes in Duluth MN. http://www.transsuperior.com/ . A new entrant this year is Mac McKenzie and his C, Worthy Pearl, out of Etobicoke, On. Anyone on the list know him or the boat? It’s great to see more

Re: Stus-List Facing an autopilot replacement

I put in a Garmin AP to drive a 3rd party hydraulic ram. Simple and works great. Plays well with B components I have.I did try Raymarine AP once. Never again. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Monday, June 12,

Re: Stus-List Garmin GNX 20

John – Also check the voltage at the unit. Pin-out of the cable is available online. N2K circuits have limits to the number of devices and the power consumption of all devices, length of cable, etc. Double check to make sure you’re inline. N2k also has issues if multiple power

Re: Stus-List Backstay length and tension

Or are you missing any shackles on the backstay that could have been used as spacers? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Friday, May 12, 2017 7:40 AM To: cnc-list@cnc-list.com Cc: Hoyt, Mike Subject: Re:

Re: Stus-List Diesel Air Heaters (Webasto, Planar, Eberspaecher/Espar)

I put in a webasto a couple years ago and it’s been working great. I’ve heard good things about the Wallas, but it’d didn’t fit well in my layout. I went with the smallest unit due to the fact that I have an open layout and I just need to take the edge off. It’s better for the units to

Stus-List early 80s vintage HilleRange oven repair

So I'm trouble shooting my HilleRange oven and working with the guys over at Sure Marine. Sounds like I may need to send them the thermostat for repair. Anyone gone down this road? Are there other options out there, other than buy a new oven? Thanks,

Re: Stus-List Windex light for <$20 Now you want it in red?

with a 2” red reflector would likely be very hard to see. 2 cents, Lee On Dec 30, 2016, at 12:54 PM, Pete Shelquist via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Thanks for suggestion. Has anyone found this in Red? Or is there a

Stus-List frame parts and pieces

Dave – Do you have a source for the cast fitting connecting the longitudinal pipes to the leg? Or each leg to the spine? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave S via CnC-List Sent: Friday, December 30, 2016 10:56 AM To: C Stus List

Re: Stus-List Windex light for <$20

Thanks for suggestion. Has anyone found this in Red? Or is there an option to put a red lens on? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Friday, December 30, 2016 9:00 AM To: CnClist Cc: Dennis C.

Re: Stus-List Velcro Adhesive

Alan – My panels are original and Velcro. The only thing I’ve found to reattach the existing tape, or securely hold new, is epoxy. I’ve tried so many different things I’ve lost track of all of them, but virtually everything else has failed within a year. It’s an aggressive solution,

Re: Stus-List AIS VHF

FWIW, my separate Garmin AIS and radio use one antenna. The AIS has a built in splitter. This is nothing new. -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Steve Thomas via CnC-List Sent: Wednesday, October 12, 2016 11:55 AM To:

Re: Stus-List C 35 Mk 1 Owners Manual

Ditto on the 37. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of BillBinaList via CnC-List Sent: Saturday, October 1, 2016 7:34 AM To: cnc-list@cnc-list.com Cc: BillBinaList Subject: Re: Stus-List C 35 Mk 1 Owners Manual Worth asking Stu

Re: Stus-List Raymarine exits the instrument, vhf and autopilot business!

You raymarine guys kill me.  Defend it to the end and drag others down when it's obvious that Ray falls short. I've been saying it for years: friends don't let friends buy raymarine.  Dave/others; Per Garmin FAQ, Here's the solution if/when you decide to leave the raymarine dark side : "The

Stus-List Raymarine Autopilot and accessories for sale

I have a Raymarine autopilot and accessories for sale. Ref link to ad and note the OBO. http://minneapolis.craigslist.org/hnp/bpo/5702048189.html thanks, ___ This list is supported by the generous donations of our members. If you like

Re: Stus-List Plumbing Related

Did it fix the original problem? -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of robert via CnC-List Sent: Tuesday, July 26, 2016 1:29 PM To: cnc-list@cnc-list.com Cc: robert Subject: Stus-List Plumbing Related Recently, on port tack, my 'head bowl'

Re: Stus-List Singing Rigging

If you have an adjustable backstay, that's probably the easiest way to change tension in the rig and remove resonance. The hum we get is usually the forestay and this takes care of it nicely. Pete C Celebration -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]

Re: Stus-List Wednesday Night racing - now scoring systems

All - For your local races, how many use PHRF vs ORC or other? TOT vs TOD? Thanks, ___ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All

Re: Stus-List Landfall 35 Bow Assembly

James – I had to pull the one on my 37 two years ago. Hard part is reaching up underneath to undo the nuts. I also had to use some heat to get the pulpit out. Local place sandblasted and powder coated the new one. Are you doing toe rails too? From: CnC-List

Re: Stus-List Fan Frustration!

Or set the fan in the front hatch. Have it pull air from the boat and exhaust out. Little less noise in the boat and it pulls air through the whole boat.  Sent from Outlook on my iPhone On Wed, Jun 29, 2016 at 12:00 PM -0500, "Bill via CnC-List" wrote:

Re: Stus-List Battery charger getting warm

Dan - This may be an indication that your batteries are shot. The charger is working to give them a juice and they're just not having it. Take a look at them before you change your charger.But also look for loose connections. From: CnC-List

Re: Stus-List solar windex light

Joel – Any updates on this? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Friday, May 20, 2016 6:50 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Re: Stus-List Wiring windex light to running lights [C 34] Local LED vendor

Re: Stus-List LMPHRF Certificates

They mailed out the first batch a month or so ago, but for some reason only half actually delivered.  They resent the whole batch last week. If you don't see something soon, call your local rep.  Sent from Outlook on my iPhone On Fri, May 20, 2016 at 1:38 PM -0700, "William Walker via

Stus-List solar windex light

Joel – I’m very interested in something like that. Let me know what happens. Thanks, From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Friday, May 20, 2016 6:50 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Re: Stus-List Wiring

Stus-List Raymarine autopilot for sale

Anyone want to buy my old autopilot? . Raymarine smart pilot x30 - good for boats <= 33,000 lbs . ST6002 display . smart talk converter e221581104455 . Raymarine wired auto helm remote . $900 total w/10% to Stu's List Only thing you need to buy

Re: Stus-List Dry ice in ice box? 1988 C MK II 30"

Ditto, especially for long offshore. Careful, it will freeze your beer. The box can handle the low temperatures without cracking. If concerned, figure out a way to keep the ice from direct contact with the box. With regard to carbon dioxide build up; the volume of CO2 would have to fill the

Re: Stus-List Interior cushions

Paul - Every few years I take the covers off and wash them. Also spray the foam to reduce odor. Biggest issue is sometimes the zippers break during the pull-off process and I take the piece over to the local shop to repair. Someday I will replace the foam and covers, just not this day. Too

Re: Stus-List Ground loop?

Sounds like the PO may have been misinformed, or overly cautious, and figured more is better. Someday will someone explain to me the concept/theory of a ground loop? I’m looking at you Fred. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ken Heaton via CnC-List

Stus-List Western Lake Superior CnC Rendezvous

Ok, I’ll jump on the band wagon… Fred/Neil – want to meet at the Bayfield Creamery for a Western Lake Superior rendezvous? I’ll buy the first round. FYI - I hear 3-5” came down yesterday and a couple more due tomorrow. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On

Re: Stus-List Solar charger selector switch

Ryan – With the low voltage and amperage you’re dealing with, any double pole, double throw (DPDT) toggle switch should work. Radio Shack (if they still exist), or other electronics store will have them. Maybe a local hardware store? From: CnC-List

Re: Stus-List Garmin Gwind

Not personally, wish I did. A number of boats in our area have them and have spoken highly, especially at low air speeds. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tom Alessi via CnC-List Sent: Monday, April 04, 2016 7:23 PM To: cnc-list@cnc-list.com Cc: Tom Alessi

Re: Stus-List Auto pilot installation

Ditto. It’s the only instrument I have at the wheel. I kept the navpod base fitting loose so it can be turned to either side or forward for better viewing. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Russell via CnC-List Sent: Sunday, March 27, 2016 7:41 PM

Stus-List sleeper factor

“sleeper factor” is an interesting comment and touches a nerve with me. The comment we get mostly is we have a “gift rating”. Seems when we do well in races our rating is a gift. However if we do poorly, we didn’t sail well. Whatever. I’m tired of other boats being sailed poorly and

Re: Stus-List Cushions smell

We used a product called " capture" that worked well. I believe we found it at a Home Depot  Sent from Outlook on my iPhone On Thu, Feb 25, 2016 at 4:12 PM -0800, "Andrew Burton via CnC-List" wrote: Baking soda and pet and toddler odor remover. Just went

Stus-List Octopus linear drive

All - I need to replace my autopilot ram and am considering the Octopus 1212LAR12. Anyone have installation or use experience with the brand? At a recent boat show the only input I had was from competitors that stated the units are loud. Also, I made a quick search in my saved emails

Re: Stus-List ProFurl Spinex

Bill – I’ve raced with an asym for the last 5 years. I looked closely at the top down spin furlers at a recent boat show. They are expensive and, I’m told, not overly reliable (yet). If looking for a way to tame a spin, I was directed by multiple sources to a sock. ATN specifically.

Re: Stus-List Diesel Heaters and installation

Steve – We’re on Lake Superior and have a little bit bigger space to heat with our 37. I went with a Webasto 2000 last year. There is only a single outlet in the space with the return air also ducted to the space – IE we don’t have fresh air makeup. If I could figure out a good way to

Stus-List chicago boat show

FYI - If anyone from the list will be at the Chicago boat show Saturday, a small contingent of C from Bayfield, WI will be there. Let me know if you're interested in putting a face to a name. Pete ___ Email address: CnC-List@cnc-list.com To change

Re: Stus-List Lemon oil cause mildew?

Josh – I’ve used lemon oil and have not had any mildew issues. However, we do try to ventilate the boat well. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Saturday, January 09, 2016 8:07 PM To: C List Cc: Josh Muckley Subject:

Stus-List boat shows

Disturbing trend in shows. I looked at the vender list for the Chicago strictly sail –now mostly RVs and powerboats. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jerome Tauber via CnC-List Sent: Thursday, December 31, 2015 12:25 PM To: cnc-list@cnc-list.com Cc:

Re: Stus-List New beer can Genoa

Jon If you are looking for a very affordable, ok shape North Dacron 155 for straight up 37, look no further. I can help you out. #6 luff tape. No UV cover. Low shipping charges from Minneapolis to Muskegon. I can't help you if you have your heart set on new, crisp, high performance model.

Re: Stus-List Lines led forward

I agree with you Andy. I cruise/race both solo and with crew and have kept the Main, jib and spin halyards at the mast. I need to be forward to hook everything up anyway and this configuration saves time/energy. I tried single line reefing and it was a pain in the butt for the reason you

Re: Stus-List Wabasto furness

Fred – Try it, you’re only out $75 if it doesn’t work. Then with your experience, I’ll be that much smarter when replacing mine. Don’t worry about the technology – fuel pumps are a lot different than a Li battery. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of

Re: Stus-List Bonded Windows (continued)

Just an observation; The VHB tape seems like a more simple installation. However, I’m curious if Plexus is evil because it’s too hard and tenacious, yet the VHB joined parts won’t come apart, in 5-10 yrs when redoing windows again it sounds like we’ll be calling VHB evil. I don’t have a

Re: Stus-List Tide prediction app for my IPad? with great lakes twist

Fred – Does it provide currents for the Great Lakes? FYI - At times I encountered up to 1 knt during the Trans. It would be nice to have a tool to help predict that. Thanks, From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent:

Re: Stus-List Fwd: Replacing Windows

Gary – I took out one of my Plexus installed windows a couple weeks ago using a dremel oscillating tool (analogous to Fein multi tool). One has to be careful, but it worked surprisingly well. It’s plexus, so there will be repair work needed to the gelcoat. I’m fortunately done will all

Stus-List converting TOD results to TOT

I’m trying to save myself some time and not reinvent the wheel: Does anyone have a spreadsheet for converting race results from TOD to TOT? >From the results I have PHRF rating and Elapsed Time in D:HH:MM:SS format. Thanks, ___ Email

Re: Stus-List Selden sprit kit install

Good write up Dennis – I installed one and sailed with it in the 2014 season. I would add a couple items to your review; 1. Watch the diameter of sprit. If one has a roller furler, you’ll need clearance between it and the deck 2. In a blow, there is a lot of lift on the front

Re: Stus-List outboard size

With the small and light mindset, does anyone have input on the small electric Torqeedos? They are a spendy. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Monday, October 26, 2015 1:43 PM To: 'cnc-list@cnc-list.com' Cc: Della

Re: Stus-List Which type of bottom paint do I have?

Sounds like VC Tar. I don't believe they still make it, but it was applied as an undercoat to VC17...if I recall correctly. -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave via CnC-List Sent: Tuesday, October 13, 2015 8:06 AM To:

Re: Stus-List Autopilot Recommendations

. Nice idea, but…. Rich Knowles Nanaimo, BC Boatless! On Oct 9, 2015, at 06:56, Pete Shelquist via CnC-List <cnc-list@cnc-list.com> wrote: Cruising World has a article summarizing different autopilot manufacturers in the Oct issue. Not a lot of detail, but another source of

Re: Stus-List Autopilot Recommendations

Cruising World has a article summarizing different autopilot manufacturers in the Oct issue. Not a lot of detail, but another source of input. I installed Raymarine SPX-30 in ’08 and it died on me this summer. I’ll replace with Garmin over the winter. Next summer I’ll be able to give a

Re: Stus-List Photo album ads & other stuff

Mark Janda is in Bayfield WI. He has a C named Red Hawk located at Port Superior. I know him well and will get him in contact with James and Rick. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Thursday, October 08, 2015

Re: Stus-List Photo album ads & other stuff

Petar - I gave Mark your contact info also. You should hear from him directly. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Petar Horvatic via CnC-List Sent: Thursday, October 08, 2015 9:27 AM To: cnc-list@cnc-list.com Cc: Petar Horvatic Subject: Re: Stus-List

Stus-List garmin announcement

FYI from a recent Garmin press release… 2015 NMEA Product Award logo Last week we received the honor of being the most recognized company in the marine electronics field by the National Marine Electronics Association

Re: Stus-List Best n2k GPS receiver?

Fred – That’s one. J From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Saturday, September 12, 2015 2:16 PM To: cnc-list@cnc-list.com Cc: Frederick G Street Subject: Re: Stus-List Best n2k GPS receiver? Dave — take a look at

Re: Stus-List Windows laptop for chartplotter?

Danny – The advice Mike gives re: 740 is very good. Coincidently, I also happen to have one for sale. Pete On Wed, Sep 9, 2015 at 8:16 AM, wrote: From: "Hoyt, Mike" To: "cnc-list@cnc-list.com"

Stus-List Raymarine SPX 30

Anyone ever get the error message “Pilot S Reset” from their Raymarine autopilot? I have an SPX 30 that won’t run for more than a couple minutes and resets to standby with the above message. I checked all the manuals I have and the only description is that it’s an internal error. No tech

Stus-List Self leveling Radar mount

I'm reviewing a couple different types of self-leveling radar mounts for a pole. Seaview and Scanstrut are two that I'm finding. Anyone have experience with either, or yet another brand? Thanks, ___ Email address: CnC-List@cnc-list.com To

Re: Stus-List anchor roller

Ditto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Kurt Heckert via CnC-List Sent: Tuesday, August 18, 2015 9:02 PM To: cnc-list@cnc-list.com Cc: Kurt Heckert Subject: Re: Stus-List anchor roller I also would like to see those pictures, my 35 mkII does not have a

Stus-List 37 icebox rebuild

Dave - . I also have a 37 ('84) and just did a quick review of your Ronin refit site. Have you tackled the re-insulation of the ice box? It's been on my list for a couple years and I'm thinking about putting it on the list this winter. Thanks, Pete From: CnC-List

Stus-List Regulator for force10 grill

I need to replace the reg on an old force 10 grill.  Model HA-011.  Only thing I've found similar is on a Dickinson @ defender.  Local hardware store has nothing. Any other suggestions? Thx___ Email address: CnC-List@cnc-list.com To change your list

Stus-List 2015 trans-superior

Another trans-superior is in the books.  Not all finishers are recorded yet, but CCs did well. Trans results here:http://www.transsuperior.com  http://www.yachtscoring.com/event_results_detail.cfm?Race_Number=1 Lots of fun racing up on superior. Those in the area are welcome to jump in any

Re: Stus-List 2015 trans-superior

) -- Bayfield, WI On Aug 6, 2015, at 7:48 AM, Pete Shelquist via CnC-List cnc-list@cnc-list.com wrote: Another trans-superior is in the books.  Not all

Stus-List island planet sails

Anyone have experience with Island Planet sails? More specifically the composite sails? ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at:

Re: Stus-List Annapolis to Newport

for. Fred Street -- Minneapolis S/V Oceanis (1979 CC Landfall 38) -- Bayfield, WI On Jun 5, 2015, at 2:13 PM, Pete Shelquist via CnC-List cnc-list@cnc-list.com wrote: Anyone have access to the wine/waves that they’re seeing now? ___ Email address

Stus-List rig tuning

A comment was made to me the other day that if an insurance company sees split rings at the rigs turnbuckles (vs cotter pins) that coverage will be null and void. I found nothing in my policy stating this detail. Anyone else ever hear of this? Thanks, Pete

Stus-List webasto parts

I’m looking for specific Webasto parts. Does anyone have name/number of marinas that install air heaters and carry parts? Thanks, ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go

Re: Stus-List webasto parts

, in order to make appropriate suggestions. Steve Thomas St. Thomas, ON (Port Stanley) - Original Message - From: Pete Shelquist via CnC-List mailto:cnc-list@cnc-list.com To: cnc-list@cnc-list.com Sent: Monday, March 30, 2015 15:21 Subject: Stus-List webasto parts I’m

Stus-List 37 stemhead casting

I'm looking for a stemhead casting, sometimes called a bowplate, for a early 80s vintage 37. Please forward salvage yards or other sources you may be aware of. Thanks, Pete ___ Email address: CnC-List@cnc-list.com To change your list

Re: Stus-List 37 stemhead casting

wrote: Pete, did you try South Shore Yachts? They have many original parts. Joel On Mon, Mar 16, 2015 at 12:57 PM, Pete Shelquist via CnC-List cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com wrote: I'm looking for a stemhead casting, sometimes called a bowplate,for a early 80s

Re: Stus-List Email List or Forum

Sounds like a couple big “ifs” out there, but assuming the cost and maintenance headache is less for Stu, I’ll vote forum From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stu via CnC-List Sent: Friday, March 13, 2015 4:32 PM To: CC Email List Subject: Stus-List Email List

Re: Stus-List Auto helm and Raymarine

Well that's pretty clear. You Raymarine guys got it going on. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Monday, March 02, 2015 9:48 AM To: Bradley Lumgair; cnc-list@cnc-list.com Subject: Re: Stus-List Auto helm and Raymarine

Re: Stus-List Handheld VHF with DSC

Gary – I’ve been digging for the information you referenced on “purchased” after 1/1/15. Can you send me a link for that? Thanks, Pete From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Sunday, February 22, 2015 12:33 PM To: Joel

Re: Stus-List Latest Chartplotters.

Per Garmin Tech Support and to clarify Bill’s comment below. Garmin’s units with Wifi built in do not require the $200 adaptor kit. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Monday, February 02, 2015 11:13 AM To: Bill Coleman;

Re: Stus-List Latest Chartplotters

Bill - I'm thinking about going down that same path and interested in what you learn about BG and Garmin chartplotters. Both have wireless capability with ipad control, which is very attractive. It'd be ideal to play with each for a while. My only experience with BG is adding a Triton Display

Stus-List handicap for after market sprits

LMPHRF, our local handicap governing body, is making adjustments to the credit and penalties of handicaps for displacement hull boats that fly asyms, with and without the addition of sprits. I'm interested in what other regions are using for regs, amount of participation, and observations of

Re: Stus-List CC 30 one design

Congrats Jack! Keep up the good work. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jack Fitzgerald via CnC-List Sent: Sunday, January 18, 2015 1:33 PM To: Tom Buscaglia; CCList Subject: Re: Stus-List CC 30 one design CC 30 OD I just shipped 3 of these boats

Stus-List Garmin 740 for sale

I'm considering upgrading my GPS. Anyone interested in a Garmin 740? I have the GXM SiriusXM receiver to go with it. Great unit. I'm going for the newer model with more features. Contact me directly. Pete ___ This List is provided by

  1   2   >