lf Magic
>
> 1983 35 Landfall
>
> Padanaram, MA
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
> *jaycotty
> . via CnC-List
> *Sent:* Monday, February 12, 2018 7:01 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* jaycotty .
] On Behalf Of jaycotty .
via CnC-List
Sent: Monday, February 12, 2018 7:01 PM
To: cnc-list@cnc-list.com
Cc: jaycotty . <jaycott...@gmail.com>
Subject: Re: Stus-List Shifter Cable
I see what you saying, I hope I can get it out, the hookup inside the pedestal
it looks like I have to disas
I see what you saying, I hope I can get it out, the hookup inside the
pedestal it looks like I have to disassemble the pedestal not easy job what
I can see.
On Mon, Feb 12, 2018 at 6:26 PM, Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> Shifter/throttle cables are available from
Yes is do goes through the pedestal down below and across the bottom. I
left the marina awhile go I'll be back in two weeks and I will take some
pictures.
On Mon, Feb 12, 2018 at 6:23 PM, Bruce Whitmore via CnC-List <
cnc-list@cnc-list.com> wrote:
> What is the structure of your pedestal? Does
Edson engine control instructions here:
http://www.edsonmarine.com/support/PDFs/installation/EB396EngineControlInstr.PDF
Last page contains instructions for replacing the cables. Important note: do
it like it says in the instructions. It is not intuitive and if you “wing it”
you’ll be
Shifter/throttle cables are available from West Marine. Replace both. Get
one of the old ones out and take it to WM for replacement options. Use the
single remaining cable to fish the 2 new cables in.
In my case I had to remove the compass and pretty well disassemble the top
of the pedestal.
What is the structure of your pedestal? Does the shift cable go through the
pedestal itself, or through stainless tubes running down the outside of the
pedestal and through the pedestal feet? It will make a huge difference.
A photo link would be helpful.
Kindest Regards,
Bruce Whitmore
