Re: Stus-List Whisker pole chock mast mount - update

2018-03-16 Thread Josh Muckley via CnC-List
Thanks Ken!  I used black starboard.  1" thick.  12"x12" pieces are
available from McMaster-Carr for about $35.  Knowing that ultimately my
starting size would need to be roughly 5"x5"x2", I decided that a
12"x12"x1" piece was going to be the smallest usable and available size.

https://www.mcmaster.com/#9785T412

I started by cutting 5 pieces 6"x2" and stacked then together for a total
of 5x6x2.  I clamped them, applied masking tape, and traced the chock.  For
ease of managing them in the saw I cut the tape so that each layer could be
separated.  Used the saw to cut each piece a bit proud of the trace.  I
then reassembled (re-stacked) and finished the sides on the drum sander.  I
now had a 2" thick block that followed the footprint of the chock.

I carefully marked centerline before separating each layer again.  This
time I masked each layer on it's "inside" face - the face which originally
measured 6"x2".  On this face I carefully measured and traced the template
of the curvature of the mast on to the tape.  I then returned to the
bandsaw and cutout the curvature of the mast, again proud of the template.
Now back to the sander.  I started with the largest piece and was careful
to regularly check the fit to my template.  Once I had the first one done,
each of the successive pieces was checked to the template and to its
neighbors so that a smooth and even fit was accomplished.

A feather edge of flashing was left after all of this sanding so I
re-clamped and assembled the pieces and used the sander to dress everything
up.

Josh


On Fri, Mar 16, 2018, 10:49 AM Ken Heaton via CnC-List <
cnc-list@cnc-list.com> wrote:

> What was the material you made it out of in the end?  Is it black
> Starboard?  I missed that detail somehow.
>
> The finished product looks great!
>
> Ken H.
>
> On 16 March 2018 at 11:38, Josh Muckley via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Thought y'all might want an update on my whisker pole mast chock mount.
>>
>> I initially was trying to find a carpenter or wood worker with bandsaw or
>> scroll saw and a spindle sander that might have been able to make this
>> piece quickly and easily.  I was having a hard time articulating to people
>> exactly what I envisioned so I attempted to draw an example in 3D on
>> SketchUP.
>>
>> https://drive.google.com/folderview?id=124KvsCtLJo2a8On7C41z0oSFVj0iHb-l
>>
>> I ended up taking my plan to a machinist who advised that he did not like
>> the idea of using starboard or layering pieces together.  He suggested
>> solid PTFE (Teflon).  With his confidence and knowledge of materials I
>> accepted his advice and agreed to have him make it.  By the end of the week
>> he contacted me and said that it was done.
>>
>> https://drive.google.com/folderview?id=1yylCrDkRVBWhbmGsrh4ZdtouE-jUpLLb
>>
>> I was extremely disappointed by the final outcome.  It was not as I had
>> designed and worse he made it out of white and then painted it.  I'm
>> concerned that any abrasion or hard impact will cause the paint to come off
>> reveling the dingy off-white base color.  He explained his own frustration
>> with the PTFE material, told me how he had spent upwards of 2 full days (16
>> hours @ $55) machining but was only charging for 1 day.  He even discounted
>> more than that for a total of $400.  $400!!!  I have enjoyed a good
>> working relationship with this machinist for some time now and he lives
>> quite close so... not wanting to destroy our relationship I begrudgingly
>> pay him, but not without first explaining my frustration.
>>
>> I went home with a renewed motivation to make my own.  Borrowed a band
>> saw and bought a spindle sander.  The ~$100 Skill bandsaw is an absolute
>> POS.  It was what I had available and fortunately was able to make due.
>> For anyone in the market for a bandsaw, I would recommend avoiding it at
>> all costs.
>>
>> http://a.co/9YKFSjf
>>
>> As for the spindle/drum sander, it was absolutely awesome!  I can't say
>> enough about how well it worked.  I have never heard of the company WEN
>> before and was quite sceptical but since Amazon is an easy return, I didn't
>> really have much to fear.  Now I'm thinking that the WEN drill press is
>> next on my wish list.
>>
>> http://a.co/0W0W8lY
>>
>> The mounting bolts go through the top and bottom layers of the 5 layer
>> sandwich, the curvature of the mast holds each layer on centerline, and the
>> chock holds pressure on each of the five layers keeping them tight against
>> the mast.  There is no structural need to bond the layers together.  The
>> whole thing turned out quite to my satisfaction which really just added
>> salt to the wound of having had the other piece made by the machinist.
>> Here's the final product installed.
>>
>> https://drive.google.com/folderview?id=102YSIYduLS_S_hxnp0bxKp1naJK1WCG1
>>
>> Thanks to everybody who answered my questions along the way.
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C 37+
>> Solomons, MD
>>
>>
>>
>>
>> On Fri, Feb 9, 2018, 

Re: Stus-List Whisker pole chock mast mount - update

2018-03-16 Thread Ken Heaton via CnC-List
What was the material you made it out of in the end?  Is it black
Starboard?  I missed that detail somehow.

The finished product looks great!

Ken H.

On 16 March 2018 at 11:38, Josh Muckley via CnC-List 
wrote:

> Thought y'all might want an update on my whisker pole mast chock mount.
>
> I initially was trying to find a carpenter or wood worker with bandsaw or
> scroll saw and a spindle sander that might have been able to make this
> piece quickly and easily.  I was having a hard time articulating to people
> exactly what I envisioned so I attempted to draw an example in 3D on
> SketchUP.
>
> https://drive.google.com/folderview?id=124KvsCtLJo2a8On7C41z0oSFVj0iHb-l
>
> I ended up taking my plan to a machinist who advised that he did not like
> the idea of using starboard or layering pieces together.  He suggested
> solid PTFE (Teflon).  With his confidence and knowledge of materials I
> accepted his advice and agreed to have him make it.  By the end of the week
> he contacted me and said that it was done.
>
> https://drive.google.com/folderview?id=1yylCrDkRVBWhbmGsrh4ZdtouE-jUpLLb
>
> I was extremely disappointed by the final outcome.  It was not as I had
> designed and worse he made it out of white and then painted it.  I'm
> concerned that any abrasion or hard impact will cause the paint to come off
> reveling the dingy off-white base color.  He explained his own frustration
> with the PTFE material, told me how he had spent upwards of 2 full days (16
> hours @ $55) machining but was only charging for 1 day.  He even discounted
> more than that for a total of $400.  $400!!!  I have enjoyed a good
> working relationship with this machinist for some time now and he lives
> quite close so... not wanting to destroy our relationship I begrudgingly
> pay him, but not without first explaining my frustration.
>
> I went home with a renewed motivation to make my own.  Borrowed a band saw
> and bought a spindle sander.  The ~$100 Skill bandsaw is an absolute
> POS.  It was what I had available and fortunately was able to make due.
> For anyone in the market for a bandsaw, I would recommend avoiding it at
> all costs.
>
> http://a.co/9YKFSjf
>
> As for the spindle/drum sander, it was absolutely awesome!  I can't say
> enough about how well it worked.  I have never heard of the company WEN
> before and was quite sceptical but since Amazon is an easy return, I didn't
> really have much to fear.  Now I'm thinking that the WEN drill press is
> next on my wish list.
>
> http://a.co/0W0W8lY
>
> The mounting bolts go through the top and bottom layers of the 5 layer
> sandwich, the curvature of the mast holds each layer on centerline, and the
> chock holds pressure on each of the five layers keeping them tight against
> the mast.  There is no structural need to bond the layers together.  The
> whole thing turned out quite to my satisfaction which really just added
> salt to the wound of having had the other piece made by the machinist.
> Here's the final product installed.
>
> https://drive.google.com/folderview?id=102YSIYduLS_S_hxnp0bxKp1naJK1WCG1
>
> Thanks to everybody who answered my questions along the way.
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C 37+
> Solomons, MD
>
>
>
>
> On Fri, Feb 9, 2018, 7:20 PM Josh Muckley via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Ok Guys,
>>
>> I've been test fitting the whisker pole and track extensions to the mast
>> while it is pulled.  I need an extra section of track to get the inboard
>> end of the pole high enough so that I can stow the pole on the mast.  I'm
>> pretty much all set but I'm down to the chock which will hold the outboard
>> end of the pole.  The chock has a flat base and needs to be mounted on the
>> curved leading edge of the mast.
>>
>> I'm interested in the collective wisdom as to how to handle this
>> situation.
>>
>>
>> Thanks,
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C 37+
>> Solomons, MD
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount - update

2018-03-16 Thread Josh Muckley via CnC-List
Thought y'all might want an update on my whisker pole mast chock mount.

I initially was trying to find a carpenter or wood worker with bandsaw or
scroll saw and a spindle sander that might have been able to make this
piece quickly and easily.  I was having a hard time articulating to people
exactly what I envisioned so I attempted to draw an example in 3D on
SketchUP.

https://drive.google.com/folderview?id=124KvsCtLJo2a8On7C41z0oSFVj0iHb-l

I ended up taking my plan to a machinist who advised that he did not like
the idea of using starboard or layering pieces together.  He suggested
solid PTFE (Teflon).  With his confidence and knowledge of materials I
accepted his advice and agreed to have him make it.  By the end of the week
he contacted me and said that it was done.

https://drive.google.com/folderview?id=1yylCrDkRVBWhbmGsrh4ZdtouE-jUpLLb

I was extremely disappointed by the final outcome.  It was not as I had
designed and worse he made it out of white and then painted it.  I'm
concerned that any abrasion or hard impact will cause the paint to come off
reveling the dingy off-white base color.  He explained his own frustration
with the PTFE material, told me how he had spent upwards of 2 full days (16
hours @ $55) machining but was only charging for 1 day.  He even discounted
more than that for a total of $400.  $400!!!  I have enjoyed a good working
relationship with this machinist for some time now and he lives quite close
so... not wanting to destroy our relationship I begrudgingly pay him, but
not without first explaining my frustration.

I went home with a renewed motivation to make my own.  Borrowed a band saw
and bought a spindle sander.  The ~$100 Skill bandsaw is an absolute POS.
It was what I had available and fortunately was able to make due.  For
anyone in the market for a bandsaw, I would recommend avoiding it at all
costs.

http://a.co/9YKFSjf

As for the spindle/drum sander, it was absolutely awesome!  I can't say
enough about how well it worked.  I have never heard of the company WEN
before and was quite sceptical but since Amazon is an easy return, I didn't
really have much to fear.  Now I'm thinking that the WEN drill press is
next on my wish list.

http://a.co/0W0W8lY

The mounting bolts go through the top and bottom layers of the 5 layer
sandwich, the curvature of the mast holds each layer on centerline, and the
chock holds pressure on each of the five layers keeping them tight against
the mast.  There is no structural need to bond the layers together.  The
whole thing turned out quite to my satisfaction which really just added
salt to the wound of having had the other piece made by the machinist.
Here's the final product installed.

https://drive.google.com/folderview?id=102YSIYduLS_S_hxnp0bxKp1naJK1WCG1

Thanks to everybody who answered my questions along the way.

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD




On Fri, Feb 9, 2018, 7:20 PM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:

> Ok Guys,
>
> I've been test fitting the whisker pole and track extensions to the mast
> while it is pulled.  I need an extra section of track to get the inboard
> end of the pole high enough so that I can stow the pole on the mast.  I'm
> pretty much all set but I'm down to the chock which will hold the outboard
> end of the pole.  The chock has a flat base and needs to be mounted on the
> curved leading edge of the mast.
>
> I'm interested in the collective wisdom as to how to handle this situation.
>
>
> Thanks,
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C 37+
> Solomons, MD
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-10 Thread Josh Muckley via CnC-List
Good call.  I considered that but the location of the chock is so close to
the bottom and the contour is from the bottom.  I don't know exactly how
much it is tapered but its not extreme.

Josh

On Feb 10, 2018 3:20 PM, "Marek Dziedzic via CnC-List" <
cnc-list@cnc-list.com> wrote:

> Josh,
>
>
>
> Did you say the mast is pulled? Can you trace the curvature at the step
> end? If the mast extrusion is tapered, this won’t work.
>
>
>
> Marek
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh
> Muckley via CnC-List
> *Sent:* Friday, February 9, 2018 19:20
> *To:* C List <cnc-list@cnc-list.com>
> *Cc:* Josh Muckley <muckl...@gmail.com>
> *Subject:* Stus-List Whisker pole chock mast mount
>
>
>
> Ok Guys,
>
>
>
> I've been test fitting the whisker pole and track extensions to the mast
> while it is pulled.  I need an extra section of track to get the inboard
> end of the pole high enough so that I can stow the pole on the mast.  I'm
> pretty much all set but I'm down to the chock which will hold the outboard
> end of the pole.  The chock has a flat base and needs to be mounted on the
> curved leading edge of the mast.
>
>
>
> I'm interested in the collective wisdom as to how to handle this situation.
>
>
>
>
>
> Thanks,
>
>
>
> Josh Muckley
>
> S/V Sea Hawk
>
> 1989 C 37+
>
> Solomons, MD
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-10 Thread Ken Heaton via CnC-List
If you have a tapered mast on a 37R, or 37 XL it only seems to taper above
the upper spreader.  Offshore Spar built those masts.  I'm not sure if the
37+ mast was tapered at all, and I don't know who built those masts.

Ken H.

On 10 February 2018 at 16:19, Marek Dziedzic via CnC-List <
cnc-list@cnc-list.com> wrote:

> Josh,
>
>
>
> Did you say the mast is pulled? Can you trace the curvature at the step
> end? If the mast extrusion is tapered, this won’t work.
>
>
>
> Marek
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh
> Muckley via CnC-List
> *Sent:* Friday, February 9, 2018 19:20
> *To:* C List <cnc-list@cnc-list.com>
> *Cc:* Josh Muckley <muckl...@gmail.com>
> *Subject:* Stus-List Whisker pole chock mast mount
>
>
>
> Ok Guys,
>
>
>
> I've been test fitting the whisker pole and track extensions to the mast
> while it is pulled.  I need an extra section of track to get the inboard
> end of the pole high enough so that I can stow the pole on the mast.  I'm
> pretty much all set but I'm down to the chock which will hold the outboard
> end of the pole.  The chock has a flat base and needs to be mounted on the
> curved leading edge of the mast.
>
>
>
> I'm interested in the collective wisdom as to how to handle this situation.
>
>
>
>
>
> Thanks,
>
>
>
> Josh Muckley
>
> S/V Sea Hawk
>
> 1989 C 37+
>
> Solomons, MD
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-10 Thread Marek Dziedzic via CnC-List
Josh,

Did you say the mast is pulled? Can you trace the curvature at the step end? If 
the mast extrusion is tapered, this won’t work.

Marek

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley 
via CnC-List
Sent: Friday, February 9, 2018 19:20
To: C List <cnc-list@cnc-list.com>
Cc: Josh Muckley <muckl...@gmail.com>
Subject: Stus-List Whisker pole chock mast mount

Ok Guys,

I've been test fitting the whisker pole and track extensions to the mast while 
it is pulled.  I need an extra section of track to get the inboard end of the 
pole high enough so that I can stow the pole on the mast.  I'm pretty much all 
set but I'm down to the chock which will hold the outboard end of the pole.  
The chock has a flat base and needs to be mounted on the curved leading edge of 
the mast.

I'm interested in the collective wisdom as to how to handle this situation.


Thanks,

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-10 Thread Dennis C. via CnC-List
If you don't have a fancy contour guage or tool, use a length of solder.

Dennis C.

On Feb 9, 2018 7:28 PM, "Joel Aronson via CnC-List" 
wrote:

Or use a contour gauge and trace the shape. Then cut it to shape

On Fri, Feb 9, 2018 at 9:18 PM Dennis C. via CnC-List 
wrote:

> Tape a piece of 60 grit sandpaper to the mast.  Rub a piece of teak,
> Starboard, UHMW or whatever up and down until it conforms to the mast.  2-3
> beer job.  Builds biceps.  Better to hoist more beers.
>
> Dennis C.
>
> On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List" 
> wrote:
>
>> Ok Guys,
>>
>> I've been test fitting the whisker pole and track extensions to the mast
>> while it is pulled.  I need an extra section of track to get the inboard
>> end of the pole high enough so that I can stow the pole on the mast.  I'm
>> pretty much all set but I'm down to the chock which will hold the outboard
>> end of the pole.  The chock has a flat base and needs to be mounted on the
>> curved leading edge of the mast.
>>
>> I'm interested in the collective wisdom as to how to handle this
>> situation.
>>
>>
>> Thanks,
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C 37+
>> Solomons, MD
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel
301 541 8551 <(301)%20541-8551>

___

Thanks everyone for supporting this list with your contributions.  Each and
every one is greatly appreciated.  If you want to support the list - use
PayPal to send contribution --   https://www.paypal.me/stumurray
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-10 Thread Josh Muckley via CnC-List
Neat trick!

In my case I actually have access to the bottom of the mast to get the
contour.

Josh

On Sat, Feb 10, 2018, 9:24 AM John Christopher via CnC-List <
cnc-list@cnc-list.com> wrote:

> A carpenters trick is to;
>
> - place the teak against the mast
> - gauge the widest gap between the teak and the mast (outer edge)
> - wrap tape around a pencil same amount as gap (This will give you the
> widest point)
> - hold teak against mast, and trace the pencil (with tape) along the mast
> starting from widest point to the other end of the piece of teak.
> - this results in the exact curvature you need.
> - sand / cut (drum sander or otherwise)
>
> Contour gage works just as well, but if you don’t have one, and don’t plan
> to use it often, the above saves some money.
>
>
> /J
>
> On Feb 9, 2018, at 9:18 PM, Dennis C.  wrote:
>
> Tape a piece of 60 grit sandpaper to the mast.  Rub a piece of teak,
> Starboard, UHMW or whatever up and down until it conforms to the mast.  2-3
> beer job.  Builds biceps.  Better to hoist more beers.
>
> Dennis C.
>
> On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List" 
> wrote:
>
>> Ok Guys,
>>
>> I've been test fitting the whisker pole and track extensions to the mast
>> while it is pulled.  I need an extra section of track to get the inboard
>> end of the pole high enough so that I can stow the pole on the mast.  I'm
>> pretty much all set but I'm down to the chock which will hold the outboard
>> end of the pole.  The chock has a flat base and needs to be mounted on the
>> curved leading edge of the mast.
>>
>> I'm interested in the collective wisdom as to how to handle this
>> situation.
>>
>>
>> Thanks,
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C 37+
>> Solomons, MD
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-10 Thread John Christopher via CnC-List
A carpenters trick is to;

- place the teak against the mast
- gauge the widest gap between the teak and the mast (outer edge)
- wrap tape around a pencil same amount as gap (This will give you the widest 
point)
- hold teak against mast, and trace the pencil (with tape) along the mast 
starting from widest point to the other end of the piece of teak.
- this results in the exact curvature you need.
- sand / cut (drum sander or otherwise)

Contour gage works just as well, but if you don’t have one, and don’t plan to 
use it often, the above saves some money.


/J

> On Feb 9, 2018, at 9:18 PM, Dennis C.  wrote:
> 
> Tape a piece of 60 grit sandpaper to the mast.  Rub a piece of teak, 
> Starboard, UHMW or whatever up and down until it conforms to the mast.  2-3 
> beer job.  Builds biceps.  Better to hoist more beers.
> 
> Dennis C.
> 
>> On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List"  
>> wrote:
>> Ok Guys,
>> 
>> I've been test fitting the whisker pole and track extensions to the mast 
>> while it is pulled.  I need an extra section of track to get the inboard end 
>> of the pole high enough so that I can stow the pole on the mast.  I'm pretty 
>> much all set but I'm down to the chock which will hold the outboard end of 
>> the pole.  The chock has a flat base and needs to be mounted on the curved 
>> leading edge of the mast.
>> 
>> I'm interested in the collective wisdom as to how to handle this situation.
>> 
>> 
>> Thanks,
>> 
>> Josh Muckley 
>> S/V Sea Hawk 
>> 1989 C 37+
>> Solomons, MD 
>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
>> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-09 Thread Josh Muckley via CnC-List
I'm on board with your thoughts Dennis and Joel.  Some complications are
that the depth of the concave curvature to accommodate the mast is 1-5/8ths
which is a lot of sanding.  Furthermore the maximum available thickness for
starboard is 1" so some sort of stacking will be needed.

Thanks for the idea,
Josh

On Feb 9, 2018 7:20 PM, "Josh Muckley via CnC-List" 
wrote:

> Ok Guys,
>
> I've been test fitting the whisker pole and track extensions to the mast
> while it is pulled.  I need an extra section of track to get the inboard
> end of the pole high enough so that I can stow the pole on the mast.  I'm
> pretty much all set but I'm down to the chock which will hold the outboard
> end of the pole.  The chock has a flat base and needs to be mounted on the
> curved leading edge of the mast.
>
> I'm interested in the collective wisdom as to how to handle this situation.
>
>
> Thanks,
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C 37+
> Solomons, MD
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-09 Thread Joel Aronson via CnC-List
Or use a contour gauge and trace the shape. Then cut it to shape

On Fri, Feb 9, 2018 at 9:18 PM Dennis C. via CnC-List 
wrote:

> Tape a piece of 60 grit sandpaper to the mast.  Rub a piece of teak,
> Starboard, UHMW or whatever up and down until it conforms to the mast.  2-3
> beer job.  Builds biceps.  Better to hoist more beers.
>
> Dennis C.
>
> On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List" 
> wrote:
>
>> Ok Guys,
>>
>> I've been test fitting the whisker pole and track extensions to the mast
>> while it is pulled.  I need an extra section of track to get the inboard
>> end of the pole high enough so that I can stow the pole on the mast.  I'm
>> pretty much all set but I'm down to the chock which will hold the outboard
>> end of the pole.  The chock has a flat base and needs to be mounted on the
>> curved leading edge of the mast.
>>
>> I'm interested in the collective wisdom as to how to handle this
>> situation.
>>
>>
>> Thanks,
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C 37+
>> Solomons, MD
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Re: Stus-List Whisker pole chock mast mount

2018-02-09 Thread Dennis C. via CnC-List
Tape a piece of 60 grit sandpaper to the mast.  Rub a piece of teak,
Starboard, UHMW or whatever up and down until it conforms to the mast.  2-3
beer job.  Builds biceps.  Better to hoist more beers.

Dennis C.

On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List" 
wrote:

> Ok Guys,
>
> I've been test fitting the whisker pole and track extensions to the mast
> while it is pulled.  I need an extra section of track to get the inboard
> end of the pole high enough so that I can stow the pole on the mast.  I'm
> pretty much all set but I'm down to the chock which will hold the outboard
> end of the pole.  The chock has a flat base and needs to be mounted on the
> curved leading edge of the mast.
>
> I'm interested in the collective wisdom as to how to handle this situation.
>
>
> Thanks,
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C 37+
> Solomons, MD
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Stus-List Whisker pole chock mast mount

2018-02-09 Thread Josh Muckley via CnC-List
Ok Guys,

I've been test fitting the whisker pole and track extensions to the mast
while it is pulled.  I need an extra section of track to get the inboard
end of the pole high enough so that I can stow the pole on the mast.  I'm
pretty much all set but I'm down to the chock which will hold the outboard
end of the pole.  The chock has a flat base and needs to be mounted on the
curved leading edge of the mast.

I'm interested in the collective wisdom as to how to handle this situation.


Thanks,

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray