Hi Eric,
On Thu, Feb 08, 2007 at 11:18:06PM -0500, Eric Dorland wrote:
Very unlikely that this will make it for etch. Once a new release of
openct I'm sure I'll package it though.
Having it the SVN version in either experimental or unstable would help
a lot too. I merged the current SVN into my
Hi,
Check your traceback, many picard's python modules are loaded from
/usr/local/ instead of /usr.
You must have an old manual installation that conflicts with the debian
package.
Remove it and it'll work again.
Moreover I just checked on two computers, Options worked like a charm.
=
On Friday 09 February 2007 01:52, Margarita Manterola wrote:
Hi!
Hi Marga!
After many hours of hard work, I have prepared a patch that updates and
fixes the Spanish translation of Heir to the Throne campaign.
Great.
I did it against the version currently in testing.
Please, do apply it and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
owner 410272 !
thanks
Nelson A. de Oliveira wrote:
Package: wormux
Version: 0.7.9-1
Severity: grave
Justification: renders package unusable
Hi!
Wormux is failing to load since it searches for a font file that isn't
available:
Il giorno ven, 09/02/2007 alle 01.55 +0100, maximilian attems ha
scritto:
On Thu, 01 Feb 2007, Mauro Sanna wrote:
Then I upgrade to etch.
I install the new kernel 2.6.18 and initramfs-tools.
I create the new initrd then, at the end of upgrade, reboot the
system.
It hangs saying that
severity 402450 important
Please justify this.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Friday 09 February 2007 01:52, Margarita Manterola wrote:
After many hours of hard work, I have prepared a patch that updates and
fixes the Spanish translation of Heir to the Throne campaign.
I did it against the version currently in testing.
Please, do apply it and send it upstream. It's
FWIW, liferea 1.2.5 was released recently; its changelist cites the fixing of
a crash on 64-bit platforms. I've been using it for the past five or six days
and haven't crashed it yet, which is better than 1.0.27-1 ever did.
This deep in the Etch freeze it's probably not reasonable to try to do a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Philippe Cloutier wrote:
severity 402450 important
Please justify this.
Fixed in Sid
Can be fixed in the installed system
Next release's migration will be taken care by Frans Pop once all D-I
components are migrated to Etch
- --
Regards,
EddyP
Package: rsync
Version: 2.6.9-2
Severity: normal
when doing a tar from a directory obtained by rsync, I have the
following error:
/.RPCDCE.H.jYze0t: ne peut stat: Aucun fichier ou
répertoire de ce type
When a RPCDCE.H file does exist.
Is the .RPCDCE.H.jYze0t file created by rsync?
Package: heimdal-clients
Version: 0.7.2.dfsg.1-9
Severity: normal
After logging in using GDM and the libpam-krb5 PAM module,
the ccache env variable is set to
KRB5CCNAME=/tmp/krb5cc_1015_snP3CL
lognan[nordmark]~ klist
Credentials cache: FILE:/tmp/krb5cc_1015_snP3CL
Principal: [EMAIL
Still seeing this problem.
Also, atd may be running, but pidfile isn't there. In such situation the
init script fails to kill atd and start a new atd process:
-bash-3.1# /etc/init.d/atd restart
Stopping deferred execution scheduler: atd.
Starting deferred execution scheduler: atd.
-bash-3.1# ps
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm running Debian Etch AMD64-Port on an AMD64-System with all newest
updates:
ii mysql-client-5.0 5.0.32-3
mysql database client binaries
ii mysql-common 5.0.32-3
mysql database common files (e.g. /etc/mysql
ii
On 09-Feb-2007 04:21.22 (GMT), Eric Dorland wrote:
Bizarre problem. If you set the font to DejaVu Sans Condensed in the
GNOME Font preferences, Iceweasel uses DejaVu Sans Regular.
http://choralone.org/cruft/random/iceweasel-wrong-font.png
It's a shame, because it just spoils
Quoting Philippe Cloutier ([EMAIL PROTECTED]):
Thanks Daniel.
Jeff, as I mentioned the code is currently ineffective, and as you seem
to understand the issue, maybe you should request that the code be fixed
while reexplaining the rationale for it.
If I understand what Daniel wrote right,
reassign 409243 lvm2
stop
On Fri, 09 Feb 2007, Mauro Sanna wrote:
ii linux-image-2. 2.6.18+5 Linux kernel 2.6 image on
PPro/Celeron/PII/P
I am using sarge and I have installded backport of linux image 2.6.18.
When I boot with kernel 2.6.8 it's all ok.
When I boot with kernel 2.6.18
Package: ssh
Version: 1:3.8.1p1-8.sarge.6
Severity: normal
File: /usr/bin/scp
scp from one system to another on the LAN
fails to transfer files.
remote version: Version: 1:3.4p1-1.woody.3
[EMAIL PROTECTED]:/tmp$ scp junker:twmrc.j .
[EMAIL PROTECTED]'s password:
protocol error: unexpected
Quoting peter green ([EMAIL PROTECTED]):
As you mention yourself, the situation you described should *not*
happen during a regular install. It can happen if a given package
modifies conffiles from another package and does not do it The Right
Way (see Policy 10.7.4).
presumablly this
On Friday 09 February 2007, Sébastien Hinderer wrote:
reopen 391846
The provided patch indeed appears in the shfs source package, but the
compilation of the binary package still fails.
You really need to be more informative about your system and about what fails.
I just built and installed
On Fri, Feb 09, 2007 at 03:03:33PM +1100, James Harper wrote:
Would it be possible for watchdog to detect a change to runlevel 0 or
6, and simply stop doing the checks which become unreliable once a
shutdown has started? This behaviour could be controlled by a config
option if necessary.
And
Sami Liedes [EMAIL PROTECTED] writes:
About 2 years ago, you reported a problem to the Debian BTS regarding a
segfault of the X server during large pixmap allocation on a Radeon
board. Did you reproduce this problem recently? If not, I will close
this bug in the next weeks.
Sorry about taking
Hi,
I chcecked the prefs.js file, however there is no such line as mentioned
in the article.
However, if I click inside gnome-about, Iceweasel is engaged as expected.
Peter
Sven Arvidsson wrote / napísal(a):
On Thu, 2007-02-08 at 16:11 +0100, Mgr. Peter Tuharsky wrote:
I'm inside Icedove, I
Package: xserver-xorg-video-ati
Version: 1:6.6.3-2
Severity: normal
After migration from Sarge (XFree) to Ech (Xorg) my Radeon Mobility
7500 card lost its 3D features.
The driver radeon which cannot be selected during dpkg-reconfigure
xserver-xorg should have 3D capabilities according man
mail sent October 16th 2006 without any reply:
Ksniffer is a network traffic analyzer for the KDE desktop environment.
Ksniffer has many features like:
hi,
i'm also interested to have ksniffer in Debian but was a bit busy to package
it with Etch freeze approaching. Are you interested to
On Fri, Feb 09, 2007 at 08:15:31AM +0800, Dan Jacobson wrote:
It is much more likely the user (er, current user, er, me) was trying
to do a slice than a multidimensional array, so both diagnostics and
the basic messages should be enhanced to consider this!
Error messages are not meant to teach
Please don't misinterpret my previous comments as criticism of you as
maintainer -- whoever wrote the code evidently just completely failed
to consider setups different to their own.
That is interesting because, being currently subscribed to the
package's PTS even though I'm not the
Package: wnpp
Severity: wishlist
* Package name: jtb
Version : 1.3.2
Upstream Author : Wanjun Wang [EMAIL PROTECTED] and others
* URL : http://compilers.cs.ucla.edu/jtb/
* License : BSD
Programming Lang: Java
Description : a syntax tree builder for
Hi,
Frank Küster [EMAIL PROTECTED] wrote:
- clean up the files in each $TEXMFVAR/fonts directory below /home/.
I'm not sure this is a good idea, or even allowed by policy
I'm pretty sure it is not allowed. Users could well get pissed off if
something in their home directory was changed
Package: lyx
Version: 1.4.3-2
Severity: normal
The hebrew letters in the help-tutorial are in reversed order.
moreother there is a paragraph that direct to link if we can see the document
but the link is broken at http://www.math.tau.ac.il/~dekelts/lyx/;
-- System Information:
Debian Release:
Package: drscheme
Version: 1:352-10
Severity: grave
Justification: renders package unusable
DrScheme fails to start with following X11 error:
X Error of failed request: BadValue (integer parameter out of range for
operation)
Major opcode of failed request: 45 (X_OpenFont)
Value in failed
Executive summary:
dmsetup / cryptsetup both fail to create a mapping on top of a raid
device (/dev/md0 in this case).
For much more details, see the bug report, any help appreciated as I'm out
of ideas on how to diagnose the error:
http://bugs.debian.org/409875
--
David Härdeman
--
To
Package: sonata
Version: 1.0-1
Severity: wishlist
Hello,
Sonata is a really nice piece of software thank you for packaging it.
A feature that I sould like to see, is that sonata save itself to the
gnome-session so that I do not have to restart it myself each time I
log in.
-- System
On Fri, Feb 09, 2007 at 03:03:33PM +1100, James Harper wrote:
Would it be possible for watchdog to detect a change to runlevel 0
or
6, and simply stop doing the checks which become unreliable once a
shutdown has started? This behaviour could be controlled by a config
option if necessary.
Il giorno ven, 09/02/2007 alle 10.39 +0100, maximilian attems ha
scritto:
reassign 409243 lvm2
stop
On Fri, 09 Feb 2007, Mauro Sanna wrote:
ii linux-image-2. 2.6.18+5 Linux kernel 2.6 image on
PPro/Celeron/PII/P
I am using sarge and I have installded backport of linux image
On Thu, Feb 08, 2007, David Härdeman wrote:
dmsetup / cryptsetup both fail to create a mapping on top of a raid
device (/dev/md0 in this case).
I don't know where the error lies, but I created two loop devices loop0
and loop1, added them to a new RAID 1 md0 device, and ran cryptsetup on
the
On Thu, Feb 08, 2007 at 09:36:43AM -0600, Adam Majer wrote:
Martin Schulze wrote:
I can't see a way of lprng postinst saying 'oh lpr is being installed'
and not deleting the directory.
I feared that...
Maybe lprng postinst can check when it's going from rc to purge
and lpr is
Hi Bastian,
|--== Bastian Kleineidam writes:
BK Bastian Blank schrieb:
So using this flag is not appropriate for debian i386 packages.
BK Ok, I attached a patch that just removes the flag usage. Since it
BK patches Makefile.in directly, no regeneration ist needed.
BK ---
On Fri, 2007-02-09 at 11:31 +0100, Sebastian Niehaus wrote:
Package: xserver-xorg-video-ati
Version: 1:6.6.3-2
Severity: normal
After migration from Sarge (XFree) to Ech (Xorg) my Radeon Mobility
7500 card lost its 3D features.
The driver radeon which cannot be selected during
On Fri, Feb 09, 2007 at 11:35:04AM +0100, Mauro Sanna wrote:
Il giorno ven, 09/02/2007 alle 10.39 +0100, maximilian attems ha
scritto:
I have had this problem after a complete upgrade to etch and I have the
same problem using backported initramfs-tools with backported kernel
2.6.18 or
Package: courier-mta
Version: 0.47-4sarge5
Severity: serious
Tags: patch
Justification: Appendix F
The prerm script of courier-mta does not remove two manpage
alternatives. The following patch corrects the problem:
--- courier-mta.prerm.orig 2007-02-09 10:24:09.896439231 +
+++
Am Freitag, den 09.02.2007, 00:39 -0800 schrieb Devin Carraway:
FWIW, liferea 1.2.5 was released recently; its changelist cites the fixing of
a crash on 64-bit platforms. I've been using it for the past five or six days
and haven't crashed it yet, which is better than 1.0.27-1 ever did.
Package: wormux
Version: 0.7.9-1
Followup-For: Bug #410272
I can confirm this bug. Exactly the same message.
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (900, 'unstable'), (600, 'testing'), (550, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to
package mailscanner
tags 369356 +unreproducible
thanks
Hello,
I have tested this with the following versions and I'm unable
to reproduce the error.
mailscanner-4.41.3-2
mailscanner-4.55.10-3
and postfix-2.3.7-1
Queue files are okay, mails get delivered and Headers are
okay. Everything is
Followup-For: Bug #402620
Package: procinfo
Version: 18-2
Hello,
It seems I was wrong when I reported this bug, a recompile is not
enough to solve this problem. The attached patch corrects this for me.
Greetings,
Fred
-- System Information:
Debian Release: 4.0
APT prefers
Johannes Stezenbach wrote:
Yes, that's correct, I have strict-order set.
Ok. In that case I think a fully understand the problem.
I use the resolvconf package to manage /etc/resolv.conf
(no server= in dnsmasq.conf). I also sometimes have to
use a VPN (using vpnc), thus I need strict-order
On 9 Feb 2007, at 11:27 am, Stefan Hornburg (Racke) wrote:
Tim Cutts wrote:
Package: courier-mta
Version: 0.47-4sarge5
Severity: serious
Tags: patch
Justification: Appendix F
The prerm script of courier-mta does not remove two manpage
alternatives. The following patch corrects the problem:
Package: iceape-browser
Version: 1.0.7-3
Severity: normal
Click on Bookmarks - Manage Bookmarks, then right-click on a bookmark
and select Properties. A window comes up which has only an OK and a
Cancel button, nothing else, so I can't edit the bookmark.
-- System Information:
Debian Release:
On Fri, February 9, 2007 11:45, Loic Minier said:
On Thu, Feb 08, 2007, David Härdeman wrote:
dmsetup / cryptsetup both fail to create a mapping on top of a raid
device (/dev/md0 in this case).
I don't know where the error lies, but I created two loop devices loop0
and loop1, added them to
Craig Small wrote:
On Thu, Feb 08, 2007 at 09:36:43AM -0600, Adam Majer wrote:
Martin Schulze wrote:
I can't see a way of lprng postinst saying 'oh lpr is being installed'
and not deleting the directory.
I feared that...
Maybe lprng postinst can check when it's going from rc
Package: tasksel
Version: 2.66
Tags: patch
Hello,
Attached is a patch that changes the tasks for Finnish language to use the
first high quality free software spell-checking and hyphenation solution,
ie. Voikko. All packages are included in etch.
Tmispell-voikko completely replaces ifinnish
Tim Cutts wrote:
Package: courier-mta
Version: 0.47-4sarge5
Severity: serious
Tags: patch
Justification: Appendix F
The prerm script of courier-mta does not remove two manpage
alternatives. The following patch corrects the problem:
--- courier-mta.prerm.orig 2007-02-09 10:24:09.896439231
Tim Cutts wrote:
Package: courier-mta
Version: 0.47-4sarge5
Severity: serious
Tags: patch
Justification: Appendix F
The prerm script of courier-mta does not remove two manpage
alternatives. The following patch corrects the problem:
--- courier-mta.prerm.orig 2007-02-09 10:24:09.896439231
On Fri, Feb 09, 2007 at 12:29:55PM +0100, Attila Rajmund Nohl wrote:
Package: iceape-browser
Version: 1.0.7-3
Severity: normal
Click on Bookmarks - Manage Bookmarks, then right-click on a bookmark
and select Properties. A window comes up which has only an OK and a
Cancel button, nothing
Package: procps
Version: 1:3.2.7-3
Severity: minor
I have 'top' running in an xterm. Then I press 'u' to specify a user name. If
I write my user name 'tmac' then press TAB, the cursor correctly jumps to the
right. But when I then press backspace, the cursor goes backward one character
at a time
On Thu, February 8, 2007 22:51, Johannes Schlumberger said:
I built the packages and installed them.
The attached file contains the generated stderr stream (which looks a bit
strange to me). Just to make shure, here is also the output generated from
the command without the redirection.
Could
On Don, 08 Feb 2007, Danai SAE-HAN wrote:
Anyway, Norbert is building your packages and will upload them if it's
Upload done.
Best wishes
Norbert
---
Dr. Norbert Preining [EMAIL PROTECTED]
On Fri, 9 Feb 2007, Alexander Sack wrote:
On Fri, Feb 09, 2007 at 12:29:55PM +0100, Attila Rajmund Nohl wrote:
Package: iceape-browser
Version: 1.0.7-3
Severity: normal
Click on Bookmarks - Manage Bookmarks, then right-click on a bookmark
and select Properties. A window comes up which has
Package: hotswap-gui
Version: 0.4.0-10
Severity: minor
Tags: patch
Cze¶æ,
Hotswap is generally used to swap devices like cdroms, dvds, etc. in laptop's
bay, but the
kde-frontend display hdd_unmount icon (both in the main window and in a
systray). I guess it would
be more accurate to display
* 2007-02-08 20:55, Ross Boylan wrote:
After receiving the same errors reported in this bug on the latest
upgrade to zope3-sandbox (3.3.0-6) from 3.3.0-5, I decided the easiest
thing was to get rid of it. That produced quite a few errors:
This error is fixed in the last zope3-sandbox
Package: kqemu-common
Version: 1.3.0~pre9-12
Severity: serious
Justification: Policy 10.6
kqemu creates a device file in its postinst script using mknod. This
violates Debian Policy 10.6. Additionally, it breaks usage of kqemu because
it creates the node with the wrong device numbers (kqemu is
Package: xserver-xorg-video-ati
Version: 1:6.6.3-2
Severity: normal
[This might be a duplicate: I had some problems with my mail setup - sorry]
After migration from Sarge (XFree) to Ech (Xorg) my Radeon Mobility
7500 card lost its 3D features.
The driver radeon which cannot be selected during
Package: libconfig-general-perl
Version: 2.31-3
Severity: normal
Hi,
Here is my source config file, the source code used, and the Data::Dumper
output.
- config file -
plop world
plip 0
plup tag
hophop contenthophop
/plup
package: interchange
Code to reproduce the problem:
[perl]
# get product list first
my (%products, $pset);
my $pset = $Db{products}-query({sql = 'select sku,title,isbn,category from
products',
hashref = 1});
for (@$pset) {
I'm maintaining ChessDB
http://chessdb.sourceforge.net/
but don't have a Debian system here, so are unable to do any testing.
Someone sent me a binary for Debian, which I put on the Sourceforge site:
Hi,
I don't know where the error lies, but I created two loop devices loop0
and loop1, added them to a new RAID 1 md0 device, and ran cryptsetup on
the resulting md0 successfully.
Ditto. I've succesfully setup a crypto mapping on a raid1 device under
qemu, which leads me to believe
On Fri, Feb 09, 2007 at 08:15:31AM +0800, Dan Jacobson wrote:
Ah ha, the user was actually trying to do a array slice!
Therefore diagnostics should say if you were attempting to do a array
slice, then just use @ instead of $!
It is much more likely the user (er, current user, er, me) was
severity 410294 normal
tags 410294 pending
thanks
kqemu creates a device file in its postinst script using mknod. This
violates Debian Policy 10.6.
no. it is only a policy violation *iff* MAKEDEV knows about the device.
it is already requested for inclusion, see #407345.
Additionally, it
Package: gawk
Version: 1:3.1.5.dfsg-4
Severity: important
I got SEGABRT from gawk on amd64 with LANG is UTF-8.
First, create data file.
$ LANG=C dpkg -l dpkg-list.txt
$ head dpkg-list.txt
Desired=Unknown/Install/Remove/Purge/Hold
|
Hi,
Could you build a new kernel which includes the patch attached to bug
report #304507 and try again?
http://bugs.debian.org/cgi-bin/bugreport.cgi/2.6-bd-claim.patch?bug=304507;msg=5;att=1
It sems the same to me. This is kernel -asso-50 (I attached the config to the
inital bugreport mail)
Package: alpine
Version: 0.81+dfsg-1
Severity: normal
alpine.1 describes the option -create_lu, which is
not accepted by the program
Regards,
Martin Ziegler
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (50, 'unstable')
Package: Rsync
dat:/# rsync --version
rsync version 2.6.9 protocol version 29
Copyright (C) 1996-2006 by Andrew Tridgell, Wayne Davison, and others.
http://rsync.samba.org/
Capabilities: 64-bit files, socketpairs, hard links, symlinks,
batchfiles, inplace, IPv6, ACLs,
Package: fluxbox
Version: 0.9.15.1+1.0rc2-1
Severity: normal
Tags: l10n
I use UTF-8 encode (ru_RU.UTF-8 locale).
Installing config parameter in the meaning:
session.screen0.strftimeFormat: %d %b, %a: %02k:%M:%S
I got too wide field 'time' at monitor.
Switching in monobyte encode (locale C
Package: alpine
Version: 0.81+dfsg-1
Severity: normal
The line addrbook-sort-rule=nickname
in .pinerc hass no effect. The addressbook will
still sorted by the default fullname-with-lists-last.
Regards,
Martin Ziegler
-- System Information:
Debian Release: 4.0
APT prefers testing
APT
Subject:: alpine: manpage decribes non-existant options
Package: alpine
Version: 0.81+dfsg-1
Severity: normal
*** Please type your report below this line ***
alpine.1 describes the option -create_lu, which is
not accepted by the program
Regards,
Martin Ziegler
-- System Information:
Debian
Hi,
I just want to point out, so far after each test I brought the system back
into the beginning state (kernel, dmsetup-package, etc).
regards,
Johannes
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: alpine
Version: 0.81+dfsg-1
Severity: normal
*** Please type your report below this line ***
The line addrbook-sort-rule=nickname
in .pinerc has no effect. The addressbook will
still sorted by the default fullname-with-lists-last.
Regards,
Martin Ziegler
-- System Information:
Debian
On Friday 09 February 2007, Daniel Baumann wrote:
severity 410294 normal
tags 410294 pending
thanks
kqemu creates a device file in its postinst script using mknod. This
violates Debian Policy 10.6.
no. it is only a policy violation *iff* MAKEDEV knows about the device.
it is already
Hi,
Sune Vuorela :
You really need to be more informative about your system and about
what fails.
The system is a Debian/Unstable, it has been upgraded recently
(a few hours ago).
Linux kernel version is 2.6.20.
Below is the buildlog produced by ma a-i shfs
dh_clean
make -C Linux-2.6 clean
On Fri, 09 Feb 2007, David Härdeman wrote:
On Thu, Feb 08, 2007, David Härdeman wrote:
dmsetup / cryptsetup both fail to create a mapping on top of a raid
device (/dev/md0 in this case).
I don't know where the error lies, but I created two loop devices loop0
and loop1, added them to
Package: libgpgme-dev
Version: 0.3.16-2
Severity: wishlist
ftp://ftp.gnupg.org/gcrypt/gpgme/ has the source for gpgme 1.0.3 and
1.1.3 (I'm not sure if 1.1 is a stable release train).
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Package: samba
Version: 3.0.23d-4
Severity: normal
Samba server list system files under backup share even whent backup
share does not exist. However, the contents of the files cannot be
readed. This bug has been found on etch and sarge systems, in amd64 and
i386 architectures.
For reproduce the
Hello,
the fix from Version 0.56-1 does not work in the current version (0.64).
Upstream included more tests about $HOME and home from /etc/passwd so
the easy fix to change only $HOME in shell does not work.
I will now disable the complete make test in build process and upload
the new
block 409524 by 405186
tags 409524 + etch-ignore
thanks
Am Donnerstag, den 08.02.2007, 22:04 +0100 schrieb Rafael Laboissiere:
* Daniel Leidert [EMAIL PROTECTED] [2007-02-08 19:17]:
It's currently in the debian-xml-sgml group's CVS, so I thought, the
group is already responsible. I'm
Package: dhcp3-client
Version: 3.0.4-13
Severity: wishlist
It would be convenient to be able to specify in the configuration file
(rather than on the command-line) that dhclient should be quiet.
Indeed, it happens that dhclient is invoked by other programs which
don't let one specify additiona
Niv Sardi-Altivanik (xaiki) escribió:
Can you add more info to the bug you are reporting ?
what kind of interface is it ? what driver ?
Regards,
Sorry,
lspci says that the ethernet device it's
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
the driver used is
On Fri 09 Feb 2007, Alejandro S?nchez Mar?n wrote:
Subject: Bug#410303: Debian etch Rsync bug
Please give a more descriptive title! Of course you're reporting a bug
about rsync...
Package: Rsync
dat:/# rsync --version
rsync version 2.6.9 protocol version 29
This info typically goes
owner 407639 !
--
Linux-User #280138 with the Linux Counter, http://counter.li.org/
# Debian GNU/Linux Consultant #
Michelle Konzack Apt. 917 ICQ #328449886
50, rue de Soultz MSM LinuxMichi
0033/6/61925193
Hello Sylvain,
On Friday 09 February 2007 14:29, Sylvain Rochet wrote:
Package: libconfig-general-perl
Version: 2.31-3
Severity: normal
Hi,
Here is my source config file, the source code used, and the Data::Dumper
output.
- config file -
plop world
plip 0
Package: lapack-doc
Version: 3.0.2531a-28
Severity: minor
The same typo occurs prominently on nearly forty manpages.
Either 'apply' or 'applies' would be acceptable. With lapack-doc
installed, the command 'apropos applie | grep -v applies'
outputs a list of nearly forty afflicted manpages.
It
I could reproduce this behaviour on a etch machine at the university
having a session which only starts xev and no windowmanager.
I get no output for Caps_Lock+Alt+1 there, too.
There are also some Sun PC's (Opterons) with sun keyboards. On that
machine it works as expected if I run
Hello,
On Fri, Feb 09, 2007 at 08:18:38AM +0100, Miroslav Kure wrote:
On Mon, Feb 05, 2007 at 06:09:09PM +0100, Christian Perrier wrote:
unfortunately, the german manpage is currently handled as a manual
XML translation of the original XML file, which doesn't scale very
well when changes
I've tracked it down to this hunk:
+#ifdef USE_ICONV /* we've copied this string */
+ slrn_free (h-from);
+#endif
This triggers a double free. With slrn_free (h-from); removed slrn
works w/o segfaults.
Yes, that's what I expected. However, simply removing the slrn_free()
will result in
Hi,
I just want to point out, so far after each test I brought the system back
into the beginning state (kernel, dmsetup-package, etc).
Yes, that's good.
I just wanted to make shure, we are stil talking about the same setup :)
Could you please try a new compile, this time, skip the
Package: gaim
Version: 1:2.0.0+beta5-9
Severity: important
This is very annoying to anyone who is in Sametime Group Chat with
anyone using Gaim ...
Please see this gaim bug:
https://sourceforge.net/tracker/index.php?func=detailaid=1596466group_id=235atid=100235
And please apply this patch
Package: xview-clients
Version: 3.2p1.4-19
Severity: normal
This package ships a short script
(sarge) /usr/X11R6/bin/owplaces
(etch) /usr/bin/owplaces
The sarge version, at least, merely tries to exec 'xtoolplaces'. However,
packages.debian.org lists no such file in either stable or
retitle 391846 shfs-source: fails to build with kernel = 2.6.19
severity 391846 important
thanks
On Fri, Feb 9, 2007 at 15:22:12 +0100, Sébastien Hinderer wrote:
Hi,
Sune Vuorela :
You really need to be more informative about your system and about
what fails.
The system is a
package: openafs-krb5
Version: 1.4.2-3
Kerberos in experimental will return null realm names for
krb5_get_realm_of_host when no domain_realm mapping exists. That's
fine but aklog assumes that it knows the realm. You actually want to
try afs/cell@ (null realm) because if your kdc has referrals
On Fri, February 9, 2007 14:42, Johannes Schlumberger said:
Hi,
I just want to point out, so far after each test I brought the system back
into the beginning state (kernel, dmsetup-package, etc).
Yes, that's good.
Could you please try a new compile, this time, skip the previously
mentioned
[sab ~] /sbin/ifconfig lo
loLien encap:Boucle locale
ifconfig intf prints the interface even if it's down.
Try ifconfig only.
HTH,
--
Eugen Dedu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
forwarded 404918 http://bugs.jpilot.org/1776
tags 404918 upstream
thanks
Le 29.12.2006, à 00:22:51, David Fries a écrit:
When printing a single page memo ghostscript outputs nothing at all.
The end END command does not issue showpage so ghostscript discards
the output that it does have and
1 - 100 of 258 matches
Mail list logo
