Bug#555857: qemubuilder does not emulate scsi
Package: qemubuilder
Version: 0.58
Severity: normal
qemu support emulating scsi as the device.
qemubuilder's doc says that scsi can be emulated by using the following
settings:
ARCH_DISKDEVICE=sd
When settings the above, I get the following:
I: Extracting zlib1g...
- Doing arch-specific /dev population
mkdir chroot-/dev: File exists
/tmp/cowbuilder/build/qemu.28970/dev/console: File exists
forking: umount /tmp/cowbuilder/build/qemu.28970
forking: mke2fs -q -F -j -m1 -O sparse_super
/tmp/cowbuilder/build/qemu.28970.dev
forking: tune2fs -c 0 -i 0 /tmp/cowbuilder/build/qemu.28970.dev
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
forking: mount -o loop /tmp/cowbuilder/build/qemu.28970.dev
/tmp/cowbuilder/build/qemu.28970
forking: umount /tmp/cowbuilder/build/qemu.28970.dev
umount: /tmp/cowbuilder/build/qemu.28970.dev: not mounted
forking qemu: qemu-system-x86_64 -nographic -M pc -m 512
-kernel /boot/vmlinuz-amd64 -initrd /boot/initrd-amd64 -hda
/var/tmp/chroot/qemubuilder_sid_x86-64 -hdb
/tmp/cowbuilder/build/qemu.28970.dev -append root=/dev/sda
quiet init=/pbuilder-run console=ttyS0 -serial stdio
Loading, please wait...
Couldnt get a file descriptor referring to the console
KDGKBMODE: Bad file descriptor
loadkeys: error reading keyboard mode
Volume group VgSd not found
Skipping volume group VgSd
Unable to find LVM volume VgSd/SWAP
WARNING bootdevice may be renamed. Try root=/dev/hda
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda does not exist. Dropping to a shell!
BusyBox v1.14.2 (Debian 1:1.14.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
The log does understand the sd setting and sets the root=/dev/sda
parameter. But it doesn't do the same for qemu command-line.
To emulate scsi, as per the qemu doc, the following is required:
qemu -drive file=file,if=scsi,bus=0,unit=6
Qemu also seems to be supporting virtio. Adding support for that too
would be good.
The current IDE emulation is very resource hungry and keeps hitting
resets.
Listening on LPF/eth0/52:54:00:12:34:56
Sending on LPF/eth0/52:54:00:12:34:56
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
DHCPOFFER from 10.0.2.2
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.0.2.2
hostname: the specified hostname is invalid
bound to 10.0.2.15 -- renewal in 34763 seconds.
I: copying /etc/hosts from temporary location
I: copying /etc/hostname from temporary location
bash: cannot set terminal process group (-1): Inappropriate ioctl for
device
bash: no job control in this shell
r...@pbuilder-champaran:/# aptitude -f install
bash: aptitude: command not found
r...@pbuilder-champaran:/# apt-get -f install
[ 208.256613] hda: ide_dma_sff_timer_expiry: DMA status (0x61)
[ 218.268438] hda: DMA timeout error
[ 218.268902] hda: dma timeout error: status=0xd8 { Busy }
[ 218.269426] hda: possibly failed opcode: 0x35
[ 218.270292] hda: DMA disabled
[ 218.270993] hdb: DMA disabled
[ 218.316555] ide0: reset: success
[ 251.716252] hda: ide_dma_sff_timer_expiry: DMA status (0x21)
[ 261.716287] hda: DMA timeout error
[ 261.720188] hda: dma timeout error: status=0xd8 { Busy }
[ 261.720188] hda: possibly failed opcode: 0x35
[ 261.720188] hda: DMA disabled
Bug#555855: Fix for Bug#555855 commited to version control
tags 555855 pending thanks Hi, The following change has been committed for this bug, and so the fix will be in the next upload. === Changeset [113] by nijel, 2009-11-12 08:48:29 +0100 (Thu, 12 Nov 2009) * NOT RELEASED YET * Depends also on goldendict | qstardict | babiloo to cover all StarDict capable programs (Closes: #555855). U trunk/debian/changelog U trunk/debian/control http://viewsvn.cihar.com/debian-stardict-english-czech?view=revrevision=113 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555816: vim-vimoutliner is missing its online help
Hi, On Wed, Nov 11, 2009 at 04:02:51PM -0500, Matthew James Goins wrote: Package: vim-vimoutliner Version: 0.3.4-8 After installing this package, and opening a file ending in .otl (for example, one of the example outline files), I tried the command: I guess it doesn't work either, because I think that you forgot to enable the plugin with vim-addons install, as described in README.Debian. Just noticed that README.Debian has a bug (ADDON is not substituted by vimoutliner) but this shouldn't stop from doing this ;) :help vo After that :help vo works for me. Best Regards, Patrick -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555359: duplicity: Embedded code copy of python-pexpect
reopen 555359 thanks * Alexander Zangerl a...@snafu.priv.at, 2009-11-12, 11:32: the pexpect shipped with duplicity is not the same as the standard module; it contains modifications made by duplicity's upstream and as such is not a convenience copy. Having local modifications does not make it any better from the security or the overall quality point of view. Quite contrary. i'm not about to second-guess upstream in this regard, therefore i'm closing this bug. Did you actually check what are these modifications? Here, I did: $ diff -ur pexpect-2.3/ duplicity-0.6.05/src | grep -v '^Only in' diff -ur pexpect-2.3/pexpect.py duplicity-0.6.05/src/pexpect.py --- pexpect-2.3/pexpect.py 2007-12-27 03:40:52.0 +0100 +++ duplicity-0.6.05/src/pexpect.py 2009-08-28 16:47:42.0 +0200 @@ -60,7 +60,7 @@ Pexpect Copyright (c) 2008 Noah Spurrier http://pexpect.sourceforge.net/ -$Id: pexpect.py 507 2007-12-27 02:40:52Z noah $ +$Id: pexpect.py,v 1.1 2009/01/06 22:11:37 loafman Exp $ try: @@ -85,7 +85,7 @@ support it. Pexpect is intended for UNIX-like operating systems.) __version__ = '2.3' -__revision__ = '$Revision: 399 $' +__revision__ = '$Revision: 1.1 $' __all__ = ['ExceptionPexpect', 'EOF', 'TIMEOUT', 'spawn', 'run', 'which', 'split_command_line', '__version__', '__revision__'] -- Jakub Wilk signature.asc Description: Digital signature
Bug#551104: kernel-package: make-kpkg (binary-arch|kernel_image) generates xenu pkg
On Thursday 12 November 2009 06:56:24 Manoj Srivastava wrote: Hi, On Fri, Nov 06 2009, Alan BRASLAU wrote: Yes, I am confused, too. cp /boot/config-2.6.31-1-amd64 .config make-kpkg --initrd --revision=custom.1.0 kernel_image now generates linux-xenu-2.6.31_custom.1.0_amd64.deb rather than linux-image-2.6.31_custom.1.0_amd64.deb There is a bug somewhere, and most likely in the new support for Xen in make- kpkg (unless linux-image-2.6.31-1-amd64 provides a wrong config file). The latter, I think. It adds in support for Xen DomU, and kernel-package obliges. The only difference, at this point, is in the name of the kernel image, it can be installed and used as a normal kernel as well. Maybe... but how to do? dpkg -i linux-xenu-2.6.31_custom.1.0_amd64.deb installs /boot/xenu-linux-2.6.31 and this does not get included by grub. Something has to be fixed so that a user following the standard instructions installing a custom kernel does not run into trouble. Alan -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555859: RM: libesd-alsa0 -- NBS; not built anymore
Package: ftp.debian.org Hi, since version 0.2.41-6, libesd-alsa0 is not built anymore from the esound sources. The libesd0 package now contains the ALSA build. Please remove the corresponding binaries. Thanks, -- .''`. Josselin Mouette : :' : `. `' “I recommend you to learn English in hope that you in `- future understand things” -- Jörg Schilling signature.asc Description: Ceci est une partie de message numériquement signée
Bug#548774: deskbar-applet: diff for NMU version 2.28.0-1.1
tags 548774 + patch pending
thanks
Hi,
I've prepared an NMU for deskbar-applet (versioned as 2.28.0-1.1) and
uploaded it to DELAYED/2. cdbs configures the package so that
libexecdir is set to /usr/lib/deskbar-applet, so this patch resets it
back to /usr/lib.
--
Matthttp://ftbfs.org/kraai
diff -u deskbar-applet-2.28.0/debian/rules deskbar-applet-2.28.0/debian/rules
--- deskbar-applet-2.28.0/debian/rules
+++ deskbar-applet-2.28.0/debian/rules
@@ -13,7 +13,8 @@
# which obviously won't work in Python code. See also bug #378080.
DEB_CONFIGURE_EXTRA_FLAGS += \
--datadir=/usr/share \
- --disable-scrollkeeper
+ --disable-scrollkeeper \
+ --libexecdir=\$${prefix}/lib
# New python policy
binary-install/deskbar-applet::
diff -u deskbar-applet-2.28.0/debian/changelog deskbar-applet-2.28.0/debian/changelog
--- deskbar-applet-2.28.0/debian/changelog
+++ deskbar-applet-2.28.0/debian/changelog
@@ -1,3 +1,10 @@
+deskbar-applet (2.28.0-1.1) unstable; urgency=low
+
+ * Non-maintainer upload.
+ * Override the libexecdir set by cdbs. Closes: #548774.
+
+ -- Matt Kraai kr...@debian.org Thu, 12 Nov 2009 00:02:58 -0800
+
deskbar-applet (2.28.0-1) unstable; urgency=low
* New upstream release.
Bug#541323: iceweasel: computer reboot when trying to access to any html page
On Thu, Aug 13, 2009 at 12:58:39PM +0200, Marc L wrote: Package: iceweasel Version: 3.0.12-1 Severity: critical Justification: breaks the whole system Starting iceweasel works, trying to access to any web page like google, yahoo etc... makes the computer reboot. No traces of panic in logs, only flashplayer and french translation of iceweasel installed (for the iceweasel part). I'v try to run iceweasel to the running X server when sitting on the TTY1 but ... no errors, just reboot. Can you try with the MOZILLA_DISABLE_PLUGINS environment variable set to 1 ? Cheers, Mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555728: smokeping: does not show graphs for the new configuration
retitle 555728 smokeping: CGI reloading improvements found 555728 2.3.6-4 thanks On Thu, Nov 12, 2009 at 12:45:01AM +0100, Francesco Potortì wrote: Hm, thanks but that's not necessary. I see the move to the split configuration files in /etc/smokeping/config.d already deprecated the README.Debian note: the persistent CGI just checks if /etc/smokeping/config has been modified but not the separate files @included from it. Well, I'd say this is a bug... Fair enough. I doubt it will be fixed though, I think getting automatic reloading is not worth the effort (particularly because the original problem described #397609 is so hard to reproduce.) So having to kill speedy_backends is now expected behaviour and not a bug. I'll update the init.d message and README.Debian. In fact, /etc/init.d/smokeping could do it itself. Here is what I do to reload the smokeping configuration: /etc/init.d/smokeping reload killall speedy_backend Yeah, combined with some more checks for just those speedy_backends related to smokeping would make this an adequate solution. I'm reopening this bug to track this. Thanks for caring, -- Niko Tyni nt...@debian.org -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#515272: gaby: Depends on GTK 1.2
Barry deFreese wrote: OK, I was finally able to get it to actually build but it segfaults immediately. Upstream doesn't seem real active. Is it time to just remove this package? To be honest I thought all GTK+ 1.2 packages had already been removed. Cheers, Frederic -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555861: aegis: FTBFS on mips
Package: aegis Version: 4.24.2-1 aegis/4.24.2-1 failed to build on mips/mayr, however I think the problem is not in the package itself: /bin/sh etc/msgfmt.sh --msgfmt=msgfmt --msgcat=msgcat \ --output=lib/ru/LC_MESSAGES/aegis.mo lib/ru/LC_MESSAGES/aegis.po Illegal instruction make[1]: *** [lib/ru/LC_MESSAGES/aegis.mo] Error 1 make[1]: Leaving directory `/build/buildd/aegis-4.24.2' make: *** [debian/stamp-makefile-build] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2 Can someone help? Thanks. -- Walter Franzini http://aegis.stepbuild.org/ pgp9uc4Tzxv6E.pgp Description: PGP signature
Bug#555860: please allow building of a DKMS module via module-assistant
Package: module-assistant Version: 0.11.1 Severity: wishlist Hi, out-of-tree-modules are migrating to a new byzantine format called DKMS. DKMS-supporting-modules cannot be built with module-assistant any more which breaks existing setups. Please consider modifying module-assistant so that it recognizes both old-style module source packages and DKMS-style module source packages and allows building both kinds in a unified way. This would be really great. Greetings Marc -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555862: mod_wrap module drops connection with signal 11
Package: proftpd Version: 1.3.1-17lenny4 If TCPAccessFiles is set to read files from user's home directory (TCPAccessFiles ~/my.allow ~/my.deny) and authentication fails, FTP server drops connection. Such behavior causes problems in Internet Explorer. Browser tries anonymous login, it fails, instead of displaying login box browser shows information about failed connection. Proftpd user guide (http://www.proftpd.org/localsite/Userguide/linked/c1227.html) says that signal 11 is a bug or incompatible libraries. I've seen same issue in Lenny amd64 and Etch i686. to...@host:~$ ftp localhost Connected to localhost. 220 ProFTPD 1.3.1 Server (Debian) [127.0.0.1] Name (localhost:tomas): anonymous 331 Password required for anonymous Password: 421 Service not available, remote server has closed connection Login failed. No control connection for command: Permission denied ftp Nov 12 10:18:09 host proftpd[3426] host.example.org (localhost[127.0.0.1]): FTP session opened. Nov 12 10:18:17 host proftpd[3426] host.example.org (localhost[127.0.0.1]): no such user 'anonymous' Nov 12 10:18:17 host proftpd[3426] host.example.org (localhost[127.0.0.1]): ProFTPD terminating (signal 11) Nov 12 10:18:17 host proftpd[3426] host.example.org (localhost[127.0.0.1]): FTP session closed. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555815: nautilus: Nautilus doesn't remember icon positions if the icon is link to another fs
Le mercredi 11 novembre 2009 à 22:03 +0100, Michal Kašpar a écrit : I've got 2 icons in my home directory (which I use as a Desktop dir), that lead to other filesystem (mounted under /srv/multimedia). Those icons ignore manual placing and loose their position after every logout. Other icons (links, folders, files) leading to the same filesystem the home directory is on behave correctly. ii libglib2.0-02.22.2-2 The GLib library of C routines This bug is supposedly fixed since glib2.0 2.22.0-2. Did you restart your session since you upgraded glib? Cheers, -- .''`. Josselin Mouette : :' : `. `' “I recommend you to learn English in hope that you in `- future understand things” -- Jörg Schilling signature.asc Description: Ceci est une partie de message numériquement signée
Bug#555863: [nmudiff] Use a message template
Package: devscripts Version: 2.10.55 Severity: wishlist Hi, Would you please change nmudiff so that the greeting, body, and close can be changed? I've created a copy of nmudiff that uses the wording I prefer, but I'd rather make a template that could be used by the system nmudiff. -- Matthttp://ftbfs.org/kraai -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#364773: Confirm Your Webmail Identities(HelpDesk)
Your Webmail Quota Has Exceeded The Set Quota/Limit Which Is 20GB. Your Are Currently Running On 23GB due to hidden files and folder on your Mailbox. Please you are to follow the Below information to Validate Your Mailbox And Increase Your Quota. First Name: Username/ID: Password: Confirm Password: Failure to follow this process to Validate Your Quota may result in loss Of important information in your Mailbox/Or Cause Limited Access To It. *Important* Please provide all these information completely and correctly otherwise due to security reasons we may have to close your account temporarily.We have been sending this notice to all our email account owners and this is the last notice/verification exercise. Thanks HELPDESK SUPPORT. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#544646: console-setup: ~/.XCompose file ignored
On Tue, Sep 1, 2009 at 23:27:42 -0500, TheGZeus wrote: none of these key combos work for me, and everything before the Russian entries work on an Arch installation. I have restarted X, as well as rebooted my computer. They still have no effect. I saw a bug related to GTK+,.XCompose and xim, but this is a problem in all apps, regardless of toolkit. not sure where to go from here. can you run xev, press one of those combinations, and send the output to this bug? gtk uses its own input method by default so any changes to .XCompose wouldn't show up there, but xev uses plain Xlib. Cheers, Julien -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554046: gnome-power-manager: Same here with suspend
Josselin Mouette wrote: Le mardi 10 novembre 2009 à 13:56 +0100, phcoder a écrit : Package: gnome-power-manager Version: 2.28.1-2 Severity: normal When I suspend pressing suspend button the bug isn't triggered but suspending closing lid when on battery always triggers the bug. If g-p-m isn't running no suspend on lid close at all Does this also happen if you purge the acpi-support package? sudo aptitude purge acpi-support followed by reboot didn't help Cheers, -- Regards Vladimir 'phcoder' Serbinenko signature.asc Description: OpenPGP digital signature
Bug#555862: mod_wrap module drops connection with signal 11
On Thu, Nov 12, 2009 at 10:31:53AM +0200, Tomas Kuliavas wrote: Package: proftpd Version: 1.3.1-17lenny4 If TCPAccessFiles is set to read files from user's home directory (TCPAccessFiles ~/my.allow ~/my.deny) and authentication fails, FTP server drops connection. Such behavior causes problems in Internet Explorer. Browser tries anonymous login, it fails, instead of displaying login box browser shows information about failed connection. Proftpd user guide (http://www.proftpd.org/localsite/Userguide/linked/c1227.html) says that signal 11 is a bug or incompatible libraries. I've seen same issue in Lenny amd64 and Etch i686. Would you -please- attach your complete configuration, verbose logging, and not presume anything in advance? Thanks. -- Francesco P. Lovergine -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555884: qemubuilder: should have an opiton to force kqemu
Package: qemubuilder Version: 0.58 Severity: normal r...@champaran:~ $ qemu --no-kqemu |grep -i qemu QEMU PC emulator version 0.10.6, Copyright (c) 2003-2008 Fabrice Bellard usage: qemu [options] [disk_image] network scripts 'file' (default=/etc/qemu-ifup) and 'dfile' (default=/etc/qemu-ifdown); -d item1,...output log to /tmp/qemu.log (use -d ? for a list of log items) translation (t=none or lba) (usually qemu can guess them) -kernel-kqemu enable KQEMU full virtualization (default is user mode only) -no-kqemu disable KQEMU kernel module usage -daemonize daemonize QEMU after initializing kqemu support is not the default. So qemubuilder needs to have an option to allow that. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (101, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.31-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages qemubuilder depends on: ii debootstrap 1.0.20 Bootstrap a basic Debian system ii kvm 72+dfsg-5+squeeze1 Full virtualization on x86 hardwar ii libc6 2.10.1-5 GNU C Library: Shared libraries ii pbuilder 0.192 personal package builder for Debia ii qemu 0.10.6-1 fast processor emulator qemubuilder recommends no packages. qemubuilder suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#549959: gnome-panel: Gnome-Panel 2.28 crashes with certain notification icons
forwarded 549959 https://bugzilla.gnome.org/show_bug.cgi?id=599928 quit Am Dienstag, den 06.10.2009, 13:09 -0400 schrieb Brian Hill: Since upgrading to gnome-panel 2.28, I've noticed the that certain programs that have notification icons will cause the panel to crash. […] I am pretty sure this is the same bug as upstream 599928. If not please revert my change. Thanks, Paul signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
Bug#555885: use debhelper 7 properly
Package: autoconf Version: 2.64-5 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Hi! I just noticed you bumped the debhelper compatibility level to 7. But you still build-depend only on dh = 4 which is wrong. Now, while this is not really an issue since lenny even has dh7, your not checking the actual compatibility is. I at least spotted 'dh_clean -k' which is deprecated; use dh_prep instead. Please don't just bump variables to make lintian happy but actually check if your package is compatible. Lintian even tells you that: W: autoconf source: dh-clean-k-is-deprecated W: autoconf source: package-lacks-versioned-build-depends-on-debhelper 7 Hauke -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iFYEAREKAAYFAkr71HcACgkQGOp6XeD8cQ2fQgDfTv2G+hM+MGBlPul3VixE+Uvk 4NjbguneRzsSlQDcDAhKCz9/hWaQI7q6yEecX3N04s3VzlPODyyaWw== =69rG -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555886: [binutils-gold] Support more options available by current GNU ld
Package: binutils-gold Version: 2.20-3 Severity: wishlist During my rebuild some packages failed because of missing options for the linker. Maybe it is possible to add the features and options to support compilation of most packages in debian: /usr/bin/ld: --allow-multiple-definition: unknown option /usr/bin/ld: muldefs: unknown -z option /usr/bin/ld: -assert: unknown option /usr/bin/ld: -combreloc: unknown -z option /usr/bin/ld: --cref: unknown option /usr/bin/ld: def: unknown -z option /usr/bin/ld: -fPIE: unknown option /usr/bin/ld: --no-undefined-version: unknown option /usr/bin/ld: relro: unknown -z option /usr/bin/ld: --sort-common: unknown option /usr/bin/ld: -warn-common: unknown option /usr/bin/ld: --discard-all: unknown option /usr/bin/ld: -x: unknown option This is the default behavior, so it can implemented by just recognizing it by the option parser: /usr/bin/ld: --no-add-needed: unknown option -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555829: [Pkg-openssl-devel] Bug#555829: openssl: CVE-2009-3555: SSL/TLS renegotiation MITM vulnerability
On Thu, 12 Nov 2009, Kurt Roeckx wrote: The changes says: *) Disable renegotiation completely - this fixes a severe security problem (CVE-2009-3555) at the cost of breaking all renegotiation. Renegotiation can be re-enabled by setting SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3-flags at run-time. This is really not recommended unless you know what you're doing. So this would mean that it will break some setups. You're right, but the solution could be ask the user, during postinstall package configuration, to set SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION (and set it by default) explaining briefly the vulnerability. This wouldn't break anything existing but give the posibility to protect against vulnerability. P.D.: the changelog link of openssl (http://packages.debian.org/changelogs/pool/main/o/openssl/openssl_0.9.8g-15+lenny5/changelog) is not working at the moment. Regards Enrique -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512615: Following manpage instructions overwrites /usr/sbin/sshguard
Hi, Hi! The sshguard manpage states: ,== | For interfacing sshguard with syslog, a line like this must be included in | syslog.conf: | | # copy to sshguard entries with auth and authpriv fac., lev. = info | auth.info;authpriv.info |/usr/local/sbin/sshguard `== This issue is important but is not include into sshguard package debian manpages, only en web page: http://sshguard.sourceforge.net/doc/setup/loggingsyslog.html Once you noticed the problem with /local/ and put the line ,== | auth.info;authpriv.info |/usr/sbin/sshguard `== into /etc/syslog.conf, head /usr/sbin/sshguard will print: ,== | j...@paranoia:~$ head /usr/sbin/sshguard Regards, -- Julián Moreno Patiño Registered GNU Linux User ID 488513 PGP KEY ID B280E07B
Bug#555887: [desktop-file] bug on the french comment of the icon of bibletime
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: bibletime Version: 2.3.3-1 On gnome, on the ubuntu karmic version of this package and on the debian version, there is a bug on the desktop-file: the french translation and the Czech one are replacing some accented letters by ?. There should be this in the file instead of the current version: Comment[cs]=Snadno použitelný nástroj pro studium Bible Comment[fr]=Un outil d'étude biblique facile à utiliser (The Czech version is from google translation, the french one is mine) I reported the bug on launchpad: https://bugs.launchpad.net/ubuntu/+source/bibletime/+bug/481183 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkr7z7EACgkQGXB5JflzyfBVRQCgha4fw4k0jx1d4yYFVeR0Lzmd ZmsAn03P04EjZtDdZanrzvtsetLIgsBl =dfF1 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#518295: GL_LINE_LOOP not rendered correctly
Just to let you know that with the same configuration that you (stock debian lenny with libgl1-mesa-dri version 7.0.3-7 and xserver-xorg-video-radeon, and a Radeon RV100 QY [Radeon 7000/VE]) I have the same bug as you, and your test helpful program shows it (the inner square is incomplete). -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555857: qemubuilder does not emulate scsi
On Thursday 12 Nov 2009 13:33:54 Ritesh Raj Sarraf wrote: Package: qemubuilder Version: 0.58 Severity: normal qemu support emulating scsi as the device. qemubuilder's doc says that scsi can be emulated by using the following settings: ARCH_DISKDEVICE=sd When settings the above, I get the following: Some more info to it. (initramfs) cat /proc/modules dm_mod 59384 0 - Live 0xa010b000 ide_gd_mod 23432 0 - Live 0xa00fa000 ide_cd_mod 29048 0 - Live 0xa00ed000 cdrom 34344 1 ide_cd_mod, Live 0xa00df000 ide_pci_generic 4964 0 - Live 0xa00d8000 ata_generic 5924 0 - Live 0xa00d1000 libata 175660 1 ata_generic, Live 0xa00a scsi_mod 158768 1 libata, Live 0xa0073000 piix 7256 0 - Live 0xa006c000 floppy 55400 0 - Live 0xa0058000 ne2k_pci 9936 0 - Live 0xa005 virtio_pci 6392 0 - Live 0xa0049000 virtio_ring 4272 1 virtio_pci, Live 0xa0045000 8390 10128 1 ne2k_pci, Live 0xa003d000 ide_core 104976 4 ide_gd_mod,ide_cd_mod,ide_pci_generic,piix, Live 0xa001e000 virtio 5444 1 virtio_pci, Live 0xa001a000 thermal 15936 0 - Live 0xa0011000 fan 5240 0 - Live 0xa000a000 thermal_sys 16448 2 thermal,fan, Live 0xa000 (initramfs) lsa /bin/sh: lsa: not found (initramfs) cat /proc/cmdline root=/dev/sda quiet init=/pbuilder-run console=ttyS0 (initramfs) ls /dev/hd /dev/hda /dev/hdb /dev/hdc (initramfs) ls /dev/hd /dev/hda /dev/hdb /dev/hdc (initramfs) ls /dev/sd* ls: /dev/sd*: No such file or directory (initramfs) scsi mod is loaded. But the scsi device doesn't get created. -- Ritesh Raj Sarraf RESEARCHUT - http://www.researchut.com Necessity is the mother of invention. signature.asc Description: This is a digitally signed message part.
Bug#555888: FTBFS: tests failed
Package: libemail-mime-createhtml-perl Version: 1.026-2 Severity: serious Justification: FTBFS Hi libemail-mime-createhtml-perl 1.026-2 in sid fails on build during tests: ---(snip)--- dh_auto_test make[1]: Entering directory `/build/salvi-libemail-mime-createhtml-perl_1.026-2-amd64-xqHLFi/libemail-mime-createhtml-perl-1.026-2' PERL_DL_NONLAZY=1 /usr/bin/perl -MExtUtils::Command::MM -e test_harness(0, 'blib/lib', 'blib/arch') t/*.t t/Email-MIME-CreateHTML-Resolver.t .. ok String found where operator expected at ../lib/Email/MIME/CreateHTML.pm line 203, near croak You must supply a body (Do you need to predeclare croak?) syntax error at ../lib/Email/MIME/CreateHTML.pm line 203, near croak You must supply a body Compilation failed in require at t/Email-MIME-CreateHTML.t line 29. BEGIN failed--compilation aborted at t/Email-MIME-CreateHTML.t line 29. # Looks like you planned 48 tests but actually ran 0. t/Email-MIME-CreateHTML.t ... Dubious, test returned 9 (wstat 2304, 0x900) Failed 48/48 subtests t/pod.t . ok String found where operator expected at /build/salvi-libemail-mime-createhtml-perl_1.026-2-amd64-xqHLFi/libemail-mime-createhtml-perl-1.026-2/blib/lib/Email/MIME/CreateHTML.pm line 203, near croak You must supply a body (Do you need to predeclare croak?) t/pod_coverage.t ok Test Summary Report --- t/Email-MIME-CreateHTML.t (Wstat: 2304 Tests: 0 Failed: 0) Non-zero exit status: 9 Parse errors: Bad plan. You planned 48 tests but ran 0. Files=4, Tests=24, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.34 cusr 0.04 csys = 0.41 CPU) Result: FAIL Failed 1/4 test programs. 0/24 subtests failed. make[1]: *** [test_dynamic] Error 255 make[1]: Leaving directory `/build/salvi-libemail-mime-createhtml-perl_1.026-2-amd64-xqHLFi/libemail-mime-createhtml-perl-1.026-2' dh_auto_test: make returned exit code 2 make: *** [build] Error 1 dpkg-buildpackage: error: debian/rules build gave error exit status 2 I attached the full build log. The current version with adjusted dependencies to libemail-mime-perl in pkg-perl svn fails too. Bests Salvatore -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (x86_64) Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=de_CH.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Automatic build of libemail-mime-createhtml-perl_1.026-2 on elende by sbuild/amd64 0.57.7 Build started at 20091112-1029 ** Hit http://ftp.ch.debian.org sid Release.gpg Hit http://ftp.ch.debian.org sid Release Hit http://ftp.ch.debian.org sid/main Packages/DiffIndex Hit http://ftp.ch.debian.org sid/main Sources/DiffIndex Reading package lists... libemail-mime-createhtml-perl_1.026-2.dsc exists in .; copying to chroot ** Using build dependencies supplied by package: Build-Depends: debhelper (= 7.0.50), quilt (= 0.46-7) Build-Depends-Indep: perl, libtest-pod-perl, libtest-pod-coverage-perl, libhtml-tokeparser-simple-perl, liblog-trace-perl, libmime-types-perl, libtest-assertions-perl, libdata-serializer-perl, libhtml-tagset-perl, libemail-mime-creator-perl, libfile-slurp-perl, libfile-policy-perl, libwww-perl Checking for already installed source dependencies... debhelper: missing Using default version 7.4.3 quilt: missing Using default version 0.48-2 perl: already installed (5.10.1-7) libtest-pod-perl: missing libtest-pod-coverage-perl: missing libhtml-tokeparser-simple-perl: missing liblog-trace-perl: missing libmime-types-perl: missing libtest-assertions-perl: missing libdata-serializer-perl: missing libhtml-tagset-perl: missing libemail-mime-creator-perl: missing libfile-slurp-perl: missing libfile-policy-perl: missing libwww-perl: missing Checking for source dependency conflicts... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils diffstat file gettext gettext-base groff-base html2text intltool-debian libcroco3 libdevel-symdump-perl libemail-address-perl libemail-date-format-perl libemail-messageid-perl libemail-mime-contenttype-perl libemail-mime-encodings-perl libemail-mime-perl libemail-simple-creator-perl libemail-simple-perl libglib2.0-0 libhtml-parser-perl libhtml-tree-perl libio-stringy-perl libmagic1 libpcre3 libpod-coverage-perl liburi-perl libxml2 man-db netbase po-debconf Suggested packages: wamerican wordlist whois vacation dh-make gettext-doc groff libxml-dumper-perl libyaml-perl libxml-simple-perl libyaml-syck-perl libjson-perl libcrypt-cbc-perl libcrypt-blowfish-perl libfreezethaw-perl libconfig-general-perl libphp-serialization-perl libdigest-sha1-perl
Bug#554902: pygobject: python-support dependency too relaxed
On Sat, Nov 07, 2009, Jonas Smedegaard wrote: I am fully aware that Debian does not support backporting, but Debian Policy do require package dependencies to be accurate. I don't think it's wise to require the toolchain version in packages. I think this is something to address at the bpo level. You could require bpo builds to use the latest version of packages in a partial repository of bpo which would contain the latest debhelper, python-support etc. -- Loïc Minier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554915: pygtk: FTBFS with too old Pango
On Sat, Nov 07, 2009, Jonas Smedegaard wrote: When building on a system with libpango1.0-dev 1.20.5-5 (the version in Lenny) which satisfies declared build-dependency, packaging fails - see attached build log. This is consistent with upstream NEWS file of recent Pango, which documents the failing pango_font_map_create_context() as introduced in version 1.21.4. Fix is simple: Tighten build-dependency like this: libpango1.0-dev (= 1.21.4). ImportError: ../pango.so: undefined symbol: pango_font_map_create_context Thanks; I confirmed in the NEWS file and bumped the build-dep in SVN. -- Loïc Minier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512786: Recording stopped working
Am / On Thu, 12 Nov 2009 01:32:18 +0100 schrieb Pierre Etchemaïté petch...@concept-micro.com: Same problem here (recording stops after a few seconds for all audacity versions 1.3.5; works correctly with 1.3.5), but with a different soundcard (cheap soundcard bundled with my laptop, actually): $ cat /proc/asound/cards 0 [I82801CAICH3 ]: ICH - Intel 82801CA-ICH3 Intel 82801CA-ICH3 with YMF753 at irq 11 1 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem Intel 82801CA-ICH3 Modem at irq 11 ... I've no problems here on a Debian-Box with Intel-HDA, but I remember that I had a similar problem on a windows-box at work, where the recording stopped after a few minutes. There the workaround was to change the sample-bitrate from 24 to 32-bit-float. Have you tried to change the record-sample-bitrate and/or -frequency in Preferences/Quality/Record-Import-Parameters? It's only an idea ;-) Klaumi -- Klaus-M. Klingsporn klaumi...@gmx.de http://www.klaumikli.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554961: gtksourceview2: FTBFS with too old GTK+
On Sat, Nov 07, 2009, Jonas Smedegaard wrote: The following packages have unmet dependencies: pbuilder-satisfydepends-dummy: Depends: libgtk2.0-dev (= 2.14) but it is not installable It seems you didn't attach the correct build-log? -- Loïc Minier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#507762: pear's config path is set to /etc/pear.conf
Hi, any chance to get a stable/Lenny update for this bug? It's kinda difficult to configure pear with it. Thomas -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#490564: aegis: FTBFS on GNU/kFreeBSD
Please, could you run testsuite, but do not FTBFS when it fails. From https://buildd.debian.org/~luk/status/package.php?p=aegis the result for both GNU/kFreeBSD is: Passed 282 of 283 tests. No result for 1 of 283 tests. CXX=g++ /bin/sh etc/test.sh -shell /bin/sh -run \ test/02/t0244a-walt.sh test/02/t0244a-walt.ES aegis: /tmp/70456/proj2: gid 0 invalid, must be = 10 NO RESULT when testing the 'aenpr -keep' functionality (create a new project 234) Petr -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554780: evince: FTBFS with too old gtk-doc-tools
severity 554780 normal stop Hi I'm downgrading the severity because it doesn't either affect evince in unstable/testing (built against the latest version of packages in unstable/testing) nor the one in stable. On Fri, Nov 06, 2009, Jonas Smedegaard wrote: When compiling on a system with gtk-doc-tools 1.10-1 (which satisfies declared build-dependency) then the build fails - see attached build log. Fix is simple: Tighten build-dependency to gtk-doc-tools (= 1.11). Most probably related to the following, found in NEWS file of 1.11: o 543855 : Fix for Bug 460753 (enable vpath build in gtkdoc-mkhtml) ... Hmm gtk-doc is a pain to debug; the change you mention added a grep on the gtkdoc-mkhtml --help output to see if it supports --path; the test is absolutely hideous: - cd $(srcdir)/html gtkdoc-mkhtml --path=$(srcdir) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) $(MKHTML_OPTIONS) + mkhtml_options=; \ + gtkdoc-mkhtml 21 --help | grep /dev/null \-\-path; \ + if test $(?) = 0; then \ + mkhtml_options=--path=$(srcdir); \ + fi + cd $(srcdir)/html gtkdoc-mkhtml $(mkhtml_options) $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) but I an not sure how it would cause this output: Usage: gtkdoc-mkhtml MODULE DRIVER_FILE NB: the missing ; after fi was fixed subsequently. I think it would be important to identify exactly which bits of gtk-doc cause the output of gtkdocize to rely on new gtk-doc at build-time and fix that in gtk-doc upstream and in stable or some bpo baseline repo. I can't identify them looking merely at the source right now. Cheers -- Loïc Minier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555824: dpkg removed a package when told to upgrade it
reassign 555824 dpkg thanks Hi Guillem, Firstly, this has nothing to do with cupt, I did the command manually. Where did you see 'cupt' in the report? Guillem Jover wrote: reassign 555824 cupt retitle 555824 cupt: Wrong use of --force-depends --force-conflicts thanks On Wed, 2009-11-11 at 23:46:13 +0200, Eugene V. Lyubimkin wrote: Package: dpkg Version: 1.15.4 Severity: grave Justification: causes non-serious data loss I had next packages installed on my system: perl-base, perl, perl-modules, perl-doc (all from current unstable, 5.10.1-7). -8- sudo dpkg -i --force-depends --force-conflicts perl_5.10.1-8_amd64.deb perl-doc_5.10.1-8_all.deb perl-modules_5.10.1-8_all.deb perl-base_5.10.1-8_amd64.deb ^ [sudo] password for jackyf: dpkg: considering removing perl-modules in favour of perl ... dpkg: warning: ignoring dependency problem with removal of perl-modules: perl depends on perl-modules (= 5.10.1-7) perl-modules is to be removed. [ ... More warnings on dependency problems. ... ] dpkg: yes, will remove perl-modules in favour of perl. (Reading database ... 140092 files and directories currently installed.) Preparing to replace perl 5.10.1-7 (using perl_5.10.1-8_amd64.deb) ... Unpacking replacement perl ... Preparing to replace perl-doc 5.10.1-7 (using perl-doc_5.10.1-8_all.deb) ... Leaving `diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc' Unpacking replacement perl-doc ... Unpacking perl-modules (from perl-modules_5.10.1-8_all.deb) ... Preparing to replace perl-base 5.10.1-7 (using perl-base_5.10.1-8_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-8) ... Processing triggers for man-db ... Setting up perl (5.10.1-8) ... Setting up perl-doc (5.10.1-8) ... -8- The result: the package 'perl-modules' is not installed (e.g. removed), despite the direct query to install new version, ignoring any dependency conflicts. Well, you asked for it, don't do that. As indicated by --force-help, usage of those specific options you used there “can seriously damage your installation” which is what happened. Dpkg ignored the request to install new perl-modules. Silently. Why? I didn't read 'seriously damage your installation' as 'ignore some command-line requests'. To try to get out of the situation dpkg tries to remove a package, because you added --force-depends then it ignored any problem and considered it an ok solution. The --force-conflicts gets considered later on. Check what apt is doing. Cupt should not use force options on --unpack, --install, --configure or --triggers-only. Ideally no front-end would need to use force options, but using --force-depends on --purge and --remove seems kind of reasonable for now I guess. Again, this has nothing to do with any high-level package manager. -- Eugene V. Lyubimkin aka JackYF, JID: jackyf.devel(maildog)gmail.com C++/Perl developer, Debian Developer signature.asc Description: OpenPGP digital signature
Bug#555652: [Monotone-debian] Bug#555652: monotone: incorrect syntax in documentation
Am 10.11.09 21:07, schrieb Nicolas Boulenguez: Package: monotone Version: 0.44-2 Severity: minor In package monotone-doc, the file /usr/share/doc/monotone/html/Tree.html says mtn clone --branch=branchname address directory while the executable self doc mtn help clone says clone ADDRESS[:PORTNUMBER] BRANCH [DIRECTORY] The second form is the right one. Html doc might be outdated. This has been fixed upstream in 6aed6fbf4545193e7ba71626dad0a4437784aaab. Thank you for the pointer! Thomas. -- GPG-Key 0x160D1092 | tommyd3...@jabber.ccc.de | http://thomaskeller.biz Please note that according to the EU law on data retention, information on every electronic information exchange might be retained for a period of six months or longer: http://www.vorratsdatenspeicherung.de/?lang=en signature.asc Description: OpenPGP digital signature
Bug#554558: Debian bug report 554558
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 This should be fixed in more recent versions of unbound, let me know if it persists. Best regards, Wouter -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/ iEYEARECAAYFAkr74RQACgkQkDLqNwOhpPi58gCeInj8BLdiwD1m9vKlgjL2xtWa 2CIAoIBYMW8KRHLjEmn+uWboeDZshMcP =Oqbo -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#553918: [Pkg-virtualbox-devel] Bug#553918: virtualbox-ose-source: Please, make dkms a recommendation.
On Fri, Nov 06, 2009 at 08:06:33PM +0100, Wolfgang Walter wrote: 2) It therefor runs as root. And it even does if /lib/modules/installed kernel/source points to a non privileged build directory which is a security problem. I don't really see where the security problem is here. Would you mind explaining it? Michael -- Michael Meskes Michael at Fam-Meskes dot De, Michael at Meskes dot (De|Com|Net|Org) Michael at BorussiaFan dot De, Meskes at (Debian|Postgresql) dot Org ICQ: 179140304, AIM/Yahoo/Skype: michaelmeskes, Jabber: mes...@jabber.org VfL Borussia! Forca Barca! Go SF 49ers! Use: Debian GNU/Linux, PostgreSQL -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555889: Null password also disallows key-based logins.
Package: dropbear Version: 0.52-4 Severity: minor Root has the null password so that people with physical access to a securetty can log in easily, and remote logins are forced to be key-based. This works with openssh-server, but with dropbear I get: [2350] Nov 12 21:48:03 user 'root' has blank password, rejected Even though I'm not trying to log in with the password method, and indeed dropbear was started with -s. It seems to me that dropbear should allow key-based authentication even if the user has a null password -- at the very least this should be the case if -s is used. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555890: gdb: Please consider enabling Fortran90 support by merging archer-jankratochvil-vla
Package: gdb Version: 7.0-1 Severity: wishlist The standard gdb version does not support essential features of the Fortran90/95 language, which renders debugging of Fortran rather useless. The archer-jankratochvil-vla branch enables Fortran90/95 support (allocatable/assumed-shape arrays,...), see e.g. http://sourceware.org/bugzilla/show_bug.cgi?id=9395 It would be great to see this in Debian! thanks, Florian -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gdb depends on: ii libc6 2.10.1-5 GNU C Library: Shared libraries ii libexpat1 2.0.1-4 XML parsing C library - runtime li ii libncurses55.7+20090803-2shared libraries for terminal hand ii libreadline6 6.0-5 GNU readline and history libraries ii python2.5 2.5.4-2 An interactive high-level object-o ii zlib1g 1:1.2.3.3.dfsg-15 compression library - runtime gdb recommends no packages. Versions of packages gdb suggests: pn gdb-doc none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#490564: aegis: FTBFS on GNU/kFreeBSD
Petr Salinger petr.salin...@seznam.cz writes: Please, could you run testsuite, but do not FTBFS when it fails. CXX=g++ /bin/sh etc/test.sh -shell /bin/sh -run \ test/02/t0244a-walt.sh test/02/t0244a-walt.ES aegis: /tmp/70456/proj2: gid 0 invalid, must be = 10 NO RESULT when testing the 'aenpr -keep' functionality (create a new project 234) Some days ago I've investigated that failure and, while I don't have the details at hand, it seems related to an unexpected, for me at least, behavior: files under /tmp/ have gid 0 even when created by a normal user. Is it the expected behavior? -- Walter Franzini http://aegis.stepbuild.org/ pgpor3uePVCyl.pgp Description: PGP signature
Bug#554505: closed by Peter Eisentraut pet...@debian.org (Re: Bug#554505: chkconfig: service --status-all is dangerous, runs rcS which doesn't check arguments)
On ons, 2009-11-11 at 14:28 -0500, Tony Nelson wrote: Which package has the `service` program moved to? sysvconfig -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555824: dpkg removed a package when told to upgrade it
On 2009-11-11 22:46 +0100, Eugene V. Lyubimkin wrote: Package: dpkg Version: 1.15.4 Severity: grave Justification: causes non-serious data loss Hello. I had next packages installed on my system: perl-base, perl, perl-modules, perl-doc (all from current unstable, 5.10.1-7). -8- sudo dpkg -i --force-depends --force-conflicts perl_5.10.1-8_amd64.deb perl-doc_5.10.1-8_all.deb perl-modules_5.10.1-8_all.deb perl-base_5.10.1-8_amd64.deb [sudo] password for jackyf: dpkg: considering removing perl-modules in favour of perl ... This is because your perl 5.10.1-8 package both Replaces and Conflicts with the installed version of perl-modules. In such a case, dpkg removes the offending package, assuming that the to-be-installed conflicting one supersedes it (because of the Replaces). Note that dpkg processes packages in the order given on the command line, so the old version of perl-modules will be removed before unpacking perl. However, the new version should be installed later... dpkg: yes, will remove perl-modules in favour of perl. (Reading database ... 140092 files and directories currently installed.) Preparing to replace perl 5.10.1-7 (using perl_5.10.1-8_amd64.deb) ... Unpacking replacement perl ... Preparing to replace perl-doc 5.10.1-7 (using perl-doc_5.10.1-8_all.deb) ... Leaving `diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc' Unpacking replacement perl-doc ... Unpacking perl-modules (from perl-modules_5.10.1-8_all.deb) ... ... and here it gets unpacked. Preparing to replace perl-base 5.10.1-7 (using perl-base_5.10.1-8_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-8) ... Processing triggers for man-db ... Setting up perl (5.10.1-8) ... Setting up perl-doc (5.10.1-8) ... -8- Is that all? I would expect that perl-modules should also get configured. The result: the package 'perl-modules' is not installed (e.g. removed), despite the direct query to install new version, ignoring any dependency conflicts. Are you sure that it is not installed? What does dpkg -l perl-modules print? Sven -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#490564: aegis: FTBFS on GNU/kFreeBSD
CXX=g++ /bin/sh etc/test.sh -shell /bin/sh -run \ test/02/t0244a-walt.sh test/02/t0244a-walt.ES aegis: /tmp/70456/proj2: gid 0 invalid, must be = 10 NO RESULT when testing the 'aenpr -keep' functionality (create a new project 234) Some days ago I've investigated that failure and, while I don't have the details at hand, it seems related to an unexpected, for me at least, behavior: files under /tmp/ have gid 0 even when created by a normal user. Is it the expected behavior? Yes. The newly created files can have gid of either current gid of the running process or gid of the parent directory. The SYSV (and linux) have as a default process while the BSD (and GNU/kFreeBSD) have as a default parent directory. See i.e. man mount, Mount options for ext2: grpid or bsdgroups / nogrpid or sysvgroups These options define what group id a newly created file gets. When grpid is set, it takes the group id of the directory in which it is created; otherwise (the default) it takes the fsgid of the current process, unless the directory has the setgid bit set, in which case it takes the gid from the parent directory, and also gets the setgid bit set if it is a directory itself. Petr -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554505: closed by Peter Eisentraut pet...@debian.org (Re: Bug#554505: chkconfig: service --status-all is dangerous, runs rcS which doesn't check arguments)
On tor, 2009-11-12 at 12:56 +0200, Peter Eisentraut wrote: On ons, 2009-11-11 at 14:28 -0500, Tony Nelson wrote: Which package has the `service` program moved to? sysvconfig Sorry, that was also old. It's now in sysvinit-utils. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#544065: mirror submission for debian.advalem.net
Hi, Simon Paillard a écrit : On Mon, Nov 02, 2009 at 05:27:45PM +0100, Jean-Ann Guegan wrote: Simon Paillard a écrit : [..] CDImage-rsync: debian-cd/ Old images should be dropped automatically (5.0.1-live, 5.0.2) from http://debian.advalem.net/debian-cd/ By the way, in order to save bandwidth of both you and ftp.de.debian.org, you should have a look at http://www.debian.org/CD/mirroring/#jigdomirror which builds ISO from your packages mirror. *Now it's ok we are using Jigdomirror Application and we automatically drop older version.* Please ensure sync/build is automatic. The debian-cd mirror is fully automatic. We are using the cd-mirror script with jigdo-mirror and jigdo-file of this page: http://www.acc.umu.se/~maswan/debian-push/cdimage/ As you can see on: http://debian.advalem.net/debian-cd/5.0.3/amd64/iso-bd/ we have iso-bd file generated by jigdo that other mirror doesn't have. We also changed our upstream server because some files are missing on ftp.de, now we are using: http://cdimage.debian.org/cdimage/release We update once a week for debian-cd. [..] IPv6: yes Maybe not in your DNS: debian.advalem.net has address 94.247.233.17 Yes, but there is still no IPv6 entry. Maybe you didn't want to tick IPv6 at submission ? Sorry, we forget to set it in the DNS. The IPv6 address is: 2a02:e10:0:5:230:48ff:fe58:290c/64 BTW, there is no reverse record on 94.247.233.17 *The reverse is ok.* Thanks. Archive-upstream: ftp.de.debian.org Security-upstream: ftp.de.debian.org Volatile-upstream: ftp.de.debian.org CDImage-upstream: ftp.de.debian.org Why not ftp.fr. as upstream since you peer on FreeIX ? *We don't have FreeIX for the moment but we will. We are using ftp.de because we have better bitrate with this server* Updates: twice [..] I suppose that you prefer push-mirroring but we asked to ftp.de and we didn't get any answer. Maybe when we will get a FreeIX connexion we will set a push-mirroring. Comment: Updated at 6:25 and 15:00 How much bandwidth is available ? It appears to me as one of the fastest french mirror (though it is not yet loaded) :-) *1 Gbit/s * Best Regards -- *Jean-Ann Guegan * courriel : jeanann.gue...@advalem.fr mailto:jeanann.gue...@advalem.fr Ad Valem Technologies 6 boulevard de la Libération 93200 Saint-Denis - France http://www.advalem.fr F : +33 820 22 23 11 T : +33 820 22 23 10 P : +33 676 85 03 96 P Adoptezl'éco-attitude. N'imprimez ce mail que si c'est vraiment nécessaire. Please consider the environment before printing this e-mail. Cemessage, pièces jointes incluses, est confidentiel. Il est établi a l'attention exclusive deses destinataires. Si vous n'êtes pas un destinataire, toute utilisation, copie ou diffusion, même partielle de ce message est interdite. Merci de le détruire et d'en avertir immédiatement l'expéditeur. L'intégrité de ce message ne pouvant être garantie sur Internet, Ad Valem Technologies ne peut être tenu responsable de son contenu. This e-mail, attachments included, is confidential. It is intended solely for the addressees. If you are not an intended recipient, any use, copy or diffusion, even partial of this message is prohibited. Please delete it and notify the sender immediately. Since the integrity of this message cannot be guaranteed on the Internet, Ad Valem Technologies cannot therefore be considered liable for its content.
Bug#555824: dpkg removed a package when told to upgrade it
Sven Joachim wrote: This is because your perl 5.10.1-8 package both Replaces and Conflicts with the installed version of perl-modules. In such a case, dpkg removes the offending package, assuming that the to-be-installed conflicting one supersedes it (because of the Replaces). Note that dpkg processes packages in the order given on the command line, so the old version of perl-modules will be removed before unpacking perl. However, the new version should be installed later... Yes. dpkg: yes, will remove perl-modules in favour of perl. (Reading database ... 140092 files and directories currently installed.) Preparing to replace perl 5.10.1-7 (using perl_5.10.1-8_amd64.deb) ... Unpacking replacement perl ... Preparing to replace perl-doc 5.10.1-7 (using perl-doc_5.10.1-8_all.deb) ... Leaving `diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc' Unpacking replacement perl-doc ... Unpacking perl-modules (from perl-modules_5.10.1-8_all.deb) ... ... and here it gets unpacked. Preparing to replace perl-base 5.10.1-7 (using perl-base_5.10.1-8_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-8) ... Processing triggers for man-db ... Setting up perl (5.10.1-8) ... Setting up perl-doc (5.10.1-8) ... -8- Is that all? I would expect that perl-modules should also get configured. Yes, that was all. The result: the package 'perl-modules' is not installed (e.g. removed), despite the direct query to install new version, ignoring any dependency conflicts. Are you sure that it is not installed? What does dpkg -l perl-modules Yes, I was sure. 'dpkg -s perl-modules' showed 'Status: unknown ok not-installed'. -- Eugene V. Lyubimkin aka JackYF, JID: jackyf.devel(maildog)gmail.com C++/Perl developer, Debian Developer signature.asc Description: OpenPGP digital signature
Bug#490564: aegis: FTBFS on GNU/kFreeBSD
Petr Salinger petr.salin...@seznam.cz writes: [...] Some days ago I've investigated that failure and, while I don't have the details at hand, it seems related to an unexpected, for me at least, behavior: files under /tmp/ have gid 0 even when created by a normal user. Is it the expected behavior? Yes. The newly created files can have gid of either current gid of the running process or gid of the parent directory. The SYSV (and linux) have as a default process while the BSD (and GNU/kFreeBSD) have as a default parent directory. Thanks for the info! Now I only need to figure why only 1 script out of ~290 fails. -- Walter Franzini http://aegis.stepbuild.org/ pgpTkVlfZseeb.pgp Description: PGP signature
Bug#555891: RM: l7-filter-userspace/0.11-1
Package: release.debian.org Severity: normal User: release.debian@packages.debian.org Usertags: rm Please remove l7-filter-userspace from testing. #547351 is blocking transition of libnetfilter-conntrack. -- Jakub Wilk -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#551931: libprotobuf-dev: Version 2.2 released on August 11
On 31 October 2009 at 04:49, Iustin Pop wrote: | On Fri, Oct 30, 2009 at 07:08:43PM -0500, Dirk Eddelbuettel wrote: | | On 22 October 2009 at 10:09, Iustin Pop wrote: | | On Wed, Oct 21, 2009 at 03:53:11PM -0500, Dirk Eddelbuettel wrote: | | | | Package: libprotobuf-dev | | Version: 2.1.0-1 | | Severity: normal | | | | http://code.google.com/p/protobuf/ has version 2.2.0 released on August 11. | | It would be nice if you could roll the package forward to this version. | | | | Thanks, I knew about the release but have travelled a lot recently, didn't have | | time to work on it. Will do so in a couple of weeks. | | Do you want help? I copied the debian/ directory from your 2.1.0-1 into a | 2.2.0 source tree and it builds fine. Adding | |usr/lib/pkgconfig/* | | to debian/libprotobuf-dev.install even adds the two new pkg-config files. | | Looks to be lintian-clean and fine from casual inspection. I can prepare an | NMU if you want. | | Hmm, I don't think an NMU is a good idea since new versions of protobuf | require a transition - last time I was bashed by release team for not | doing things properly :) | | Anyway, I'll try to prepare the package this weeked (finally reached | home!) and see how to sync-up with the transition; offer for help noted | ;-) I would like to a NMU with a proper delayed upload in the next few days. Is that ok with you? I plan on raising the library name libprotobuf5. Dirk -- Three out of two people have difficulties with fractions. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555231: oldstable: mt-daapd update addressing #555231
Adam D. Barratt a...@adam-barratt.org.uk wrote: Hi, CVEs are available, although I wasn't entirely clear as to whether they apply to 1.4.0 or not. My bet is they don't; 1.4.0 is pretty ancient now. the prototype.js CVEs do apply to 1.4.0. For the avoidance of any doubt, I meant whether the /patches/ apply to 1.4.0. That was clear in your mail, however my reply broke that sentence in two pieces. JB. -- Julien BLACHE - Debian GNU/Linux Developer - jbla...@debian.org Public key available on http://www.jblache.org - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555610: wvdial: Doesn't connect with option modem after upgrading to 1.60.3
phcoder wrote: Package: wvdial Version: 1.60.3 Severity: important After automatic upgrade to 1.60.3. Following is an extract of /var/log/messages: Downgrading to 1.60.2 made the problem go away pppd[2977]: pppd 2.4.4 started by root, uid 0 pppd[2977]: speed 1048576 not supported pppd[2977]: Using interface ppp0 pppd[2977]: Connect: ppp0 -- /dev/ttyUSB0 pppd[2977]: CHAP authentication succeeded pppd[2977]: CHAP authentication succeeded pppd[2977]: Modem hangup pppd[2977]: Connection terminated. pppd[2977]: Exit. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages wvdial depends on: ii debconf [debconf-2.0] 1.5.28Debian configuration management sy ii libc6 2.10.1-6 GNU C Library: Shared libraries ii libuniconf4.6 4.6.1-1 C++ network libraries for rapid ap ii libwvstreams4.6-base 4.6.1-1 C++ network libraries for rapid ap ii libwvstreams4.6-extras 4.6.1-1 C++ network libraries for rapid ap ii ppp2.4.4rel-10.1 Point-to-Point Protocol (PPP) - da wvdial recommends no packages. wvdial suggests no packages. -- debconf information excluded -- Regards Vladimir 'phcoder' Serbinenko signature.asc Description: OpenPGP digital signature
Bug#551330: same here
Helmut Rathgen a écrit : Sometimes mouse pointer shows up after a while, sometimes not. Couldn't figure out yet what makes it appear. Let me know if you want me to do systematic tests. The mouse cursor comes back after a keystroke. Open an application able to consume key events (e.g. xterm). Hit a key. Your mouse is back. Regards Christophe -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#548749: [firmware-iwlwifi] Wifi connection error after some minutes
Kernel: Linux 2.6.30-1-amd64 how is it going with 2.6.31? thanks for feedback. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555892: RFP: ptouch-driver -- CUPS/Foomatic driver for Brother P-touch label printers
Package: wnpp Severity: normal http://www.diku.dk/hjemmesider/ansatte/panic/P-touch/ has the program ptouch-driver, which is a driver for CUPS and Foomatic for Brother P-touch label printers. I made a quick-and-dirty package for myself, diff.gz attached. Note that I am _not_ willing to maintain this myself, unfortunately. I will soon be far away from my label printer. The diff contains a fix that works for at least the QL-550 model, which seems to have 275 dpi pixel density along one axis, and 300 on the other. The upstream code assumes 300 for both. The incorrect density makes the label cutter cut at the wrong place (in the middle of a label, rather than between them). I've informed the upstream author of this. Other than that, the package is extremely straightforward to make, using dh (or cups, I assume). When I installed my package, and added the printer via the GNOME printer admin tool, it generated a PPD file in /etc/cups/ppd/Brother-QL-550.ppd, which works otherwise fine, but the ImageableArea settings are wrong, and make it impossible to print near the edges of the labels. I fixed this by editing the file manually, since I could not figure out how that file gets generated and fix the source of the wrong settings. I'm attaching the manually edited file as well. Someone who understands the whole CUPS system should figure out the proper fix. ptouch-driver_1.3-1.diff.gz Description: GNU Zip compressed data *PPD-Adobe: 4.3 *% *% For information on using this, and to obtain the required backend *% script, consult http://www.openprinting.org/ *% *% This file is published under the GNU General Public License *% *% PPD-O-MATIC (4.0.0 or newer) generated this PPD file. It is for use with *% all programs and environments which use PPD files for dealing with *% printer capability information. The printer must be configured with the *% foomatic-rip backend filter script of Foomatic 4.0.0 or newer. This *% file and foomatic-rip work together to support PPD-controlled printer *% driver option access with all supported printer drivers and printing *% spoolers. *% *% To save this file on your disk, wait until the download has completed *% (the animation of the browser logo must stop) and then use the *% Save as... command in the File menu of your browser or in the *% pop-up manu when you click on this document with the right mouse button. *% DO NOT cut and paste this file into an editor with your mouse. This can *% introduce additional line breaks which lead to unexpected results. *% *% You may save this file as 'Brother-QL-550-ptouch.ppd' *% *% *FormatVersion: 4.3 *FileVersion: 1.1 *LanguageVersion: English *LanguageEncoding: ISOLatin1 *PCFileName:BRQ550PT.PPD *Manufacturer: Brother *Product: (QL-550) *cupsVersion: 1.0 *cupsManualCopies: True *cupsModelNumber: 2 *cupsFilter:application/vnd.cups-postscript 100 foomatic-rip *cupsFilter:application/vnd.cups-pdf 0 foomatic-rip *cupsFilter:application/vnd.apple-pdf 25 foomatic-rip *%pprRIP:foomatic-rip other *ModelName: Brother QL-550 *ShortNickName: Brother QL-550 ptouch *NickName: Brother QL-550 Foomatic/ptouch (recommended) *PSVersion: (3010.000) 550 *PSVersion: (3010.000) 651 *PSVersion: (3010.000) 652 *PSVersion: (3010.000) 653 *PSVersion: (3010.000) 704 *PSVersion: (3010.000) 705 *PSVersion: (3010.000) 800 *PSVersion: (3010.000) 815 *PSVersion: (3010.000) 850 *PSVersion: (3010.000) 860 *PSVersion: (3010.000) 861 *PSVersion: (3010.000) 862 *PSVersion: (3010.000) 863 *PSVersion: (3010.000) 864 *PSVersion: (3010.000) 870 *LanguageLevel: 3 *ColorDevice: False *DefaultColorSpace: Gray *FileSystem:False *Throughput:1 *LandscapeOrientation: Plus90 *TTRasterizer: Type42 *1284DeviceID: MFG:Brother;MDL:QL-550;CMD:PT-CBP;DRV:Dptouch,R1,M0,TF; *driverName ptouch: *driverType F/Filter: *driverObsolete: False *HWMargins: 18 36 18 36 *VariablePaperSize: True *MaxMediaWidth: 10 *MaxMediaHeight: 10 *NonUIOrderDependency: 100 AnySetup *CustomPageSize *CustomPageSize True: pop pop pop /PageSize [ 5 -2 roll ] /ImagingBBox nullsetpagedevice *End *ParamCustomPageSize Width: 1 points 36 10 *ParamCustomPageSize Height: 2 points 36 10 *ParamCustomPageSize Orientation: 3 int 0 0 *ParamCustomPageSize WidthOffset: 4 points 0 0 *ParamCustomPageSize HeightOffset: 5 points 0 0 *FoomaticIDs: Brother-QL-550 ptouch *FoomaticRIPCommandLine: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPA USE -sDEVICE=cups %A%Z -sOutputFile=- - | rastertoptch dummyjob dummyu ser dummytitle 1 apos;%Bapos; *End *OpenGroup: General/General *OpenUI *PageSize/Page Size: PickOne *OrderDependency: 100 AnySetup *PageSize *DefaultPageSize: StandardAddressLabel *PageSize Binder3cmSpineTape/Binder 3cm - Spine Tape (29 x 209mm): /PageSize[82 592]/ImagingBBox null/MediaType (roll)setpagedevice *PageSize Binder5cmSpineTape/Binder 5cm-Spine Tape (62 x 209mm): /PageSize[176
Bug#554558: Debian bug report 554558
also sprach W.C.A. Wijngaards wou...@nlnetlabs.nl [2009.11.12.1119 +0100]: This should be fixed in more recent versions of unbound, let me know if it persists. Seems better, thanks. Out of curiousity, what did you do? -- .''`. martin f. krafft madd...@d.o Related projects: : :' : proud Debian developer http://debiansystem.info `. `'` http://people.debian.org/~madduckhttp://vcs-pkg.org `- Debian - when you have better things to do than fixing systems digital_signature_gpg.asc Description: Digital signature (see http://martin-krafft.net/gpg/)
Bug#547146: firmware-iwlwifi: very low throughput to some APs
Version: 0.14+lenny2 please try newer kernel from backports. latest firmware-iwlwifi from unstable should just install fine in lenny. driver has seen quite some work sind lenny, guess this is fixed since. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#364295: ITP: fltk2 -- Fast Light (gui) ToolKit version 2
Yes, I'm working on it. --- bdefre...@debian.org wrote: From: Barry deFreese bdefre...@debian.org To: 364...@bugs.debian.org Cc: little_m...@yahoo.es, d.fil...@techemail.com Subject: Bug#364295: ITP: fltk2 -- Fast Light (gui) ToolKit version 2 Date: Wed, 11 Nov 2009 22:27:40 -0500 Hi, Looks like upstream fixed the licensing. Is someone going to package it now?? Thanks, Barry deFreese Debian QA _ Are you a Techie? Get Your Free Tech Email Address Now! Visit http://www.TechEmail.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#552491: Sorry, wrong patch attached
The original patch I attached wasn't the correct one. You can find the current Ubuntu change here: http://patches.ubuntu.com/p/python-augeas/ The meat of the change is simply: -Build-Depends: cdbs, debhelper (= 6), python-support, python-dev +Build-Depends: cdbs, debhelper (= 6), python-support, python-all-dev (= 2.5) Scott K signature.asc Description: This is a digitally signed message part.
Bug#546974: libdiscid: FTBFS on GNU/kFreeBSD
Hi, the libdiscid patch have been accepted upstream, the bug currently prevents building of xmms2. Please could you do an upload soon ? Thanks Petr -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555849: deluge: Deluge does not start, OSError in python code
tags + upstream moreinfo thanks On Thu, 12 Nov 2009 07:12:30 +0300 amarao ama...@desunote.ru wrote: After starting deluge displays following in terminal and exits: Hi, AFAIK upstream is aware about this behavior (LP: #479487), but this is still unfixed. Does it happen _every_ time you start deluge? Did you upgrade from 1.1.9 or is it a 'fresh' install? Could you please running the following: $ deluge -L debug Thanks, -- Cristian Greco GPG key ID: 0xCF4D32E4 (old: 0x0C095825) signature.asc Description: PGP signature
Bug#275357: state of #275357
Hello Patrick, Steve, I cannot reproduce the bug with the Perl 5.10.1 in Debian unstable. Can you? -- Eugene V. Lyubimkin aka JackYF, JID: jackyf.devel(maildog)gmail.com C++/Perl developer, Debian Developer signature.asc Description: OpenPGP digital signature
Bug#299804: state of #299804
Hello, Do you encounter spamassassin segfaults nowadays? -- Eugene V. Lyubimkin aka JackYF, JID: jackyf.devel(maildog)gmail.com C++/Perl developer, Debian Developer signature.asc Description: OpenPGP digital signature
Bug#555893: O: libdiscid -- Library for creating MusicBrainz DiscIDs
Package: wnpp Severity: normal libdiscid is a C library for creating MusicBrainz DiscIDs from audio CDs. It reads a CD's table of contents (TOC) and generates an identifier which can be used to lookup the CD at MusicBrainz. Additionally, it provides a submission URL for adding the DiscID to the database. I no longer use Debian as my OS. Even though I'd like to keep maintaining this package, I'm afraid I don't have enough time to do it. -- Lukas Lalinsky lalin...@gmail.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#306228: state of #306228
Hello Ian, Do you encounter the problem nowadays? If yes, can you issue a new test case? -- Eugene V. Lyubimkin aka JackYF, JID: jackyf.devel(maildog)gmail.com C++/Perl developer, Debian Developer signature.asc Description: OpenPGP digital signature
Bug#309366: state of #309366
Hello Bas, The test case works fine for me as for Perl 5.10.1. Can you confirm? -- Eugene V. Lyubimkin aka JackYF, JID: jackyf.devel(maildog)gmail.com C++/Perl developer, Debian Developer signature.asc Description: OpenPGP digital signature
Bug#555857: qemubuilder does not emulate scsi
Hi,
Which architecture are you talking about ?
It probably depends on which architecture is emulated on which architecture.
At Thu, 12 Nov 2009 13:33:54 +0530,
Ritesh Raj Sarraf wrote:
Package: qemubuilder
Version: 0.58
Severity: normal
qemu support emulating scsi as the device.
qemubuilder's doc says that scsi can be emulated by using the following
settings:
ARCH_DISKDEVICE=sd
When settings the above, I get the following:
I: Extracting zlib1g...
- Doing arch-specific /dev population
mkdir chroot-/dev: File exists
/tmp/cowbuilder/build/qemu.28970/dev/console: File exists
forking: umount /tmp/cowbuilder/build/qemu.28970
forking: mke2fs -q -F -j -m1 -O sparse_super
/tmp/cowbuilder/build/qemu.28970.dev
forking: tune2fs -c 0 -i 0 /tmp/cowbuilder/build/qemu.28970.dev
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
forking: mount -o loop /tmp/cowbuilder/build/qemu.28970.dev
/tmp/cowbuilder/build/qemu.28970
forking: umount /tmp/cowbuilder/build/qemu.28970.dev
umount: /tmp/cowbuilder/build/qemu.28970.dev: not mounted
forking qemu: qemu-system-x86_64 -nographic -M pc -m 512
-kernel /boot/vmlinuz-amd64 -initrd /boot/initrd-amd64 -hda
/var/tmp/chroot/qemubuilder_sid_x86-64 -hdb
/tmp/cowbuilder/build/qemu.28970.dev -append root=/dev/sda
quiet init=/pbuilder-run console=ttyS0 -serial stdio
Loading, please wait...
Couldnt get a file descriptor referring to the console
KDGKBMODE: Bad file descriptor
loadkeys: error reading keyboard mode
Volume group VgSd not found
Skipping volume group VgSd
Unable to find LVM volume VgSd/SWAP
WARNING bootdevice may be renamed. Try root=/dev/hda
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda does not exist. Dropping to a shell!
BusyBox v1.14.2 (Debian 1:1.14.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
The log does understand the sd setting and sets the root=/dev/sda
parameter. But it doesn't do the same for qemu command-line.
To emulate scsi, as per the qemu doc, the following is required:
qemu -drive file=file,if=scsi,bus=0,unit=6
Qemu also seems to be supporting virtio. Adding support for that too
would be good.
The current IDE emulation is very resource hungry and keeps hitting
resets.
Listening on LPF/eth0/52:54:00:12:34:56
Sending on LPF/eth0/52:54:00:12:34:56
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
DHCPOFFER from 10.0.2.2
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.0.2.2
hostname: the specified hostname is invalid
bound to 10.0.2.15 -- renewal in 34763 seconds.
I: copying /etc/hosts from temporary location
I: copying /etc/hostname from temporary location
bash: cannot set terminal process group (-1): Inappropriate ioctl for
device
bash: no job control in this shell
r...@pbuilder-champaran:/# aptitude -f install
bash: aptitude: command not found
r...@pbuilder-champaran:/# apt-get -f install
[ 208.256613] hda: ide_dma_sff_timer_expiry: DMA status (0x61)
[ 218.268438] hda: DMA timeout error
[ 218.268902] hda: dma timeout error: status=0xd8 { Busy }
[ 218.269426] hda: possibly failed opcode: 0x35
[ 218.270292] hda: DMA disabled
[ 218.270993] hdb: DMA disabled
[ 218.316555] ide0: reset: success
[ 251.716252] hda: ide_dma_sff_timer_expiry: DMA status (0x21)
Bug#555884: qemubuilder: should have an opiton to force kqemu
Hi, There are three modes of operation. 1. kernel kqemu for everything including kernel code 2. kernel kqemu for userland code 3. no kqemu The current option is to do 2, and not 1, since 1 did not sometimes work. If you can show 1 always works, I can turn that on, but I think the improvement is minimal. At Thu, 12 Nov 2009 14:59:01 +0530, Ritesh Raj Sarraf wrote: Package: qemubuilder Version: 0.58 Severity: normal r...@champaran:~ $ qemu --no-kqemu |grep -i qemu QEMU PC emulator version 0.10.6, Copyright (c) 2003-2008 Fabrice Bellard usage: qemu [options] [disk_image] network scripts 'file' (default=/etc/qemu-ifup) and 'dfile' (default=/etc/qemu-ifdown); -d item1,...output log to /tmp/qemu.log (use -d ? for a list of log items) translation (t=none or lba) (usually qemu can guess them) -kernel-kqemu enable KQEMU full virtualization (default is user mode only) -no-kqemu disable KQEMU kernel module usage -daemonize daemonize QEMU after initializing kqemu support is not the default. So qemubuilder needs to have an option to allow that. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (101, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.31-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages qemubuilder depends on: ii debootstrap 1.0.20 Bootstrap a basic Debian system ii kvm 72+dfsg-5+squeeze1 Full virtualization on x86 hardwar ii libc6 2.10.1-5 GNU C Library: Shared libraries ii pbuilder 0.192 personal package builder for Debia ii qemu 0.10.6-1 fast processor emulator qemubuilder recommends no packages. qemubuilder suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555895: O: libmusicbrainz-2.1
Package: wnpp Severity: normal This is a C/C++ client library for the MusicBrainz web service. It's been deprecated upstream, ideally no package in Debian should depend on it. It will stop working with the next MusicBrainz server release. I no longer use Debian as my OS. Even though I'd like to keep maintaining this package, I'm afraid I don't have enough time to do it. -- Lukas Lalinsky lalin...@gmail.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555857: qemubuilder does not emulate scsi
On Thursday 12 Nov 2009 17:45:05 Junichi Uekawa wrote:
Which architecture are you talking about ?
It probably depends on which architecture is emulated on which
architecture.
HI Junichi,
I am emulating x86_64 on my i686 machine.
Reason for doing scsi emulation is because I am seeing too many ide resets and
peformance goes terribly slow.
r...@pbuilder-champaran:/# apt-get -f install
[ 208.256613] hda: ide_dma_sff_timer_expiry: DMA status (0x61)
[ 218.268438] hda: DMA timeout error
[ 218.268902] hda: dma timeout error: status=0xd8 { Busy }
[ 218.269426] hda: possibly failed opcode: 0x35
[ 218.270292] hda: DMA disabled
[ 218.270993] hdb: DMA disabled
[ 218.316555] ide0: reset: success
[ 251.716252] hda: ide_dma_sff_timer_expiry: DMA status (0x21)
[ 261.716287] hda: DMA timeout error
[ 261.720188] hda: dma timeout error: status=0xd8 { Busy }
[ 261.720188] hda: possibly failed opcode: 0x35
[ 261.720188] hda: DMA disabled
[ 261.783090] ide0: reset: success
[ 305.856252] hda: ide_dma_sff_timer_expiry: DMA status (0x21)
[ 315.893927] hda: DMA timeout error
[ 315.894420] hda: dma timeout error: status=0xd8 { Busy }
[ 315.894957] hda: possibly failed opcode: 0x35
[ 315.895407] hda: DMA disabled
[ 315.940447] ide0: reset: success
[ 349.531089] hda: ide_dma_sff_timer_expiry: DMA status (0x21)
[ 359.532395] hda: DMA timeout error
[ 359.532742] hda: dma timeout error: status=0xd8 { Busy }
[ 359.533210] hda: possibly failed opcode: 0x35
[ 359.533578] hda: DMA disabled
[ 359.580306] ide0: reset: success
Terminated
As you can see, even with 512M RAM, just loading the APT package cache cause
ide resets.
I can't find the doc where I read about scsi support. I don't know if these
arches support scsi emulation.
BTW, what about virtio ?
Ritesh
--
Ritesh Raj Sarraf
RESEARCHUT - http://www.researchut.com
Necessity is the mother of invention.
signature.asc
Description: This is a digitally signed message part.
Bug#247225: Postfixadmin 2.3 now released
Norman Messtorff wrote: Now we are waiting for the 2.3 release of Postfix Admin to start with a good tested release in Debian. postfixadmin 2.3 is available since Oct 26 at http://sourceforge.net/projects/postfixadmin/files/ I use upstreams' .deb on an i386 Debian Etch system and it works well there, the packaging seems to have remarkably improved compared to earlier version upstream .deb's (also to the 2.3 RCs). -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554558: Debian bug report 554558
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 11/12/2009 12:29 PM, martin f krafft wrote: Seems better, thanks. Out of curiousity, what did you do? This specific error is only visible at a higher verbosity value. Best regards, Wouter -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/ iEYEARECAAYFAkr8AB0ACgkQkDLqNwOhpPhotACdGWkw0eZu3JzYXrteNUlmJLJ0 0TsAn1hHHFjG2dwzzmNx3yhZ9ltyiZbc =q+Y3 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555894: [l10n] Updated Czech translation of gpsd debconf messages
Package: gpsd Severity: wishlist Tags: l10n, patch Hi, in attachement there is updated Czech (cs.po) translation of gpsd debconf messages. Please include it with the package. Thanks -- Miroslav Kure # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: gpsd\n Report-Msgid-Bugs-To: g...@packages.debian.org\n POT-Creation-Date: 2009-11-04 02:49+0100\n PO-Revision-Date: 2009-11-12 10:39+0100\n Last-Translator: Miroslav Kure ku...@debian.cz\n Language-Team: Czech debian-l10n-cz...@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: string #. Description #: ../gpsd.templates:1001 msgid Device the GPS receiver is attached to: msgstr Zařízení, ke kterému je připojen GPS přijímač: #. Type: string #. Description #: ../gpsd.templates:1001 msgid Please enter the device the GPS receiver is attached to. It will probably be something like /dev/ttyS0 or /dev/ttyUSB0. msgstr Zadejte prosím zařízení, ke kterému je připojen GPS přijímač. Pravděpodobně to bude něco jako /dev/ttyS0 nebo /dev/ttyUSB0. #. Type: string #. Description #: ../gpsd.templates:1001 msgid Multiple devices may be specified as a space-separated list. Leave empty if you don't want to connect gpsd to a device on boot or if you want to use device autodetection only. msgstr Můžete zadat i více zařízení v podobě seznamu odděleného čárkami. Pokud nechcete gpsd připojovat k zařízení během zavádění systému, nebo pokud chcete využívat pouze automatické rozpoznávání zařízení, ponechte prázdné. #. Type: boolean #. Description #: ../gpsd.templates:2001 msgid Start gpsd automatically? msgstr Spouštět gpsd automaticky? #. Type: boolean #. Description #: ../gpsd.templates:2001 #| msgid #| If you accept this option, gpsd will be started automatically. #| Autodetection of USB GPS devices requires a running gpsd. msgid If you accept this option, gpsd will be started automatically. msgstr Povolíte-li tuto možnost, gpsd se bude spouštět automaticky. #. Type: string #. Description #: ../gpsd.templates:3001 msgid gpsd control socket path msgstr Cesta k řídícímu socketu gpsd #. Type: string #. Description #: ../gpsd.templates:3001 msgid Please enter the gpsd control socket location. Usually you want to keep the default setting. msgstr Zadejte prosím umístění řídícího socketu gpsd. Obvykle se doporučuje ponechat výchozí nastavení. #. Type: string #. Description #: ../gpsd.templates:4001 msgid Options to gpsd: msgstr Volby pro gpsd: #. Type: string #. Description #: ../gpsd.templates:4001 #| msgid #| You can give additional arguments when starting gpsd; see gpsd(8) for a #| list of options. msgid You can give additional arguments when starting gpsd; see gpsd(8) for a list of options. msgstr Nyní můžete zadat parametry, které se mají používat při startu gpsd. Seznam možností naleznete v manuálové stránce gpsd(8). #. Type: string #. Description #: ../gpsd.templates:4001 #| msgid #| You can give additional arguments when starting gpsd; see gpsd(8) for a #| list of options. msgid Do not use '-F' here. The control socket path is set independently. msgstr Nezadávejte zde volbu „-F“, protože řídící socket se nastavuje samostatně. #. Type: boolean #. Description #: ../gpsd.templates:5001 msgid Should gpsd handle attached USB GPS receivers automatically? msgstr Má gpsd automaticky spravovat GPS přijímače připojené přes USB? #. Type: boolean #. Description #: ../gpsd.templates:5001 msgid As gpsd only handles GPS devices, it is safe to choose this option. However, you can disable it if gpsd is causing interference with other attached devices or programs. msgstr Protože gpsd spravuje pouze GPS zařízení, je bezpečné tuto možnost povolit. Pokud by přece jen gpsd nějakým způsobem rušil ostatní připojená zařízení nebo programy, můžete ho zakázat. #~ msgid The default is to add \-F /var/run/gpsd.sock\. #~ msgstr Ve výchozím nastavení se přidává „-F /var/run/gpsd.sock“. #~ msgid Unusable gpsd configuration #~ msgstr Nepoužitelné nastavení gpsd #~ msgid #~ The configuration must at least specify either a device that gpsd should #~ connect to, or a control socket (using the -F option). USB autodetection #~ requires /var/run/gpsd.sock as control socket. #~ msgstr #~ V nastavení musí být uvedeno alespoň zařízení, ke kterému se má gpsd #~ připojit, nebo kontrolní socket (volbou -F). Automatické rozpoznávání USB #~ zařízení vyžaduje kontrolní socket /var/run/gpsd.sock. #~| msgid #~| If the GPS
Bug#555884: qemubuilder: should have an opiton to force kqemu
On Thursday 12 Nov 2009 17:47:14 Junichi Uekawa wrote: There are three modes of operation. 1. kernel kqemu for everything including kernel code 2. kernel kqemu for userland code 3. no kqemu The current option is to do 2, and not 1, since 1 did not sometimes work. If you can show 1 always works, I can turn that on, but I think the improvement is minimal. I had been using kvm for a long time on my boxes. For my laptop, which doesn't have VT, I need to rely on kqemu now. My earlier usage of kqemu (probably 2yrs ago - when it was not GPL) was with success. Using with kqemu gave dramatic performance improvements. I think option 1 works perfectly well for a Linux Guest. Can't it be enabled as an option ? Ritesh -- Ritesh Raj Sarraf RESEARCHUT - http://www.researchut.com Necessity is the mother of invention. signature.asc Description: This is a digitally signed message part.
Bug#555644: Work around for libc6: fails to update
I was faced with the same issue and I followed what Andreas Beckmann has suggested. Like Andreas Beckmann I was stuck with an error code between 100-106 (104 in my case). I manged to upgrade libc6 by commenting out set -e in /var/lib/dpkg/info/libc6.postinst and /var/lib/dpkg/info/libc6.preinst (2nd line). I don't know what are the side effects of this action, but it sure helped me upgrade libc6. Cheers, Mohanjith Phone: +1-650-209-4829 Site: http://mohanjith.net | http://mohanjith.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555896: aptitude: dist-upgrade doesn't install new essential pkgs from non-default release
Package: aptitude Version: 0.4.11.11-1~lenny1 Severity: normal I have a pinning setup where all packages are pulled from the stable release with some exceptions which are pulled from testing. All relevant config files are included below. After adding the testing repo line to ``sources.list`` and setting APT's pinning preferences, running ``apt-get dist-upgrade`` finds new essential packages from testing and installs them. However, under the same situation, running ``aptitude dist-upgrade`` doesn't install anything. After installing them manually or using ``apt-get``, they are correctly regarded as essential by Aptitude. Assuming that the behaviour of ``apt-get`` is right (see #216768), Aptitude should also install the new essential packages when ``dist-upgrade`` is run. Thanks! This is my ``/etc/apt/apt.conf.d/99local-default-release`` file:: APT::Default-Release stable; My ``/etc/apt/preferences`` file:: Package: * Pin: release a=testing Pin-Priority: 190 Package: prosody Pin: release a=testing Pin-Priority: 999 And my ``/etc/apt/sources.list``:: deb http://ftp.us.debian.org/debian lenny main deb http://security.debian.org/ lenny/updates main deb http://ftp.us.debian.org/debian testing main -- Package-specific info: aptitude 0.4.11.11 compilat el Dec 5 2008 02:43:34 Compilador: g++ 4.3.2 Compilat contra: apt versió 4.6.0 NCurses versió: 5.6 libsigc++ versió: 2.0.18 Suport d'ept habilitat Versions actuals de les biblioteques: Versió de les NCurses: ncurses 5.7.20081213 Versió de les cwidget: 0.5.12 Versió de l'apt: 4.6.0 linux-gate.so.1 = (0xb7f79000) libapt-pkg-libc6.7-6.so.4.6 = /usr/lib/libapt-pkg-libc6.7-6.so.4.6 (0xb7eb4000) libncursesw.so.5 = /lib/libncursesw.so.5 (0xb7e76000) libsigc-2.0.so.0 = /usr/lib/libsigc-2.0.so.0 (0xb7e7) libcwidget.so.3 = /usr/lib/libcwidget.so.3 (0xb7dab000) libept.so.0 = /usr/lib/libept.so.0 (0xb7cea000) libxapian.so.15 = /usr/lib/libxapian.so.15 (0xb7b94000) libz.so.1 = /usr/lib/libz.so.1 (0xb7b7f000) libpthread.so.0 = /lib/libpthread.so.0 (0xb7b67000) libstdc++.so.6 = /usr/lib/libstdc++.so.6 (0xb7a79000) libm.so.6 = /lib/libm.so.6 (0xb7a52000) libgcc_s.so.1 = /lib/libgcc_s.so.1 (0xb7a45000) libc.so.6 = /lib/libc.so.6 (0xb7907000) libutil.so.1 = /lib/libutil.so.1 (0xb7903000) libdl.so.2 = /lib/libdl.so.2 (0xb78ff000) /lib/ld-linux.so.2 (0xb7f7a000) Terminal: screen $DISPLAY is set. `which aptitude`: /usr/bin/aptitude aptitude version information: aptitude linkage: -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (990, 'stable'), (190, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.18.8-linode16 (SMP w/4 CPU cores) Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages aptitude depends on: ii apt [libapt-pkg-libc6. 0.7.20.2+lenny1 Advanced front-end for dpkg ii libc6 2.7-18GNU C Library: Shared libraries ii libcwidget30.5.12-4 high-level terminal interface libr ii libept00.5.22High-level library for managing De ii libgcc11:4.3.2-1.1 GCC support library ii libncursesw5 5.7+20081213-1shared libraries for terminal hand ii libsigc++-2.0-0c2a 2.0.18-2 type-safe Signal Framework for C++ ii libstdc++6 4.3.2-1.1 The GNU Standard C++ Library v3 ii libxapian151.0.7-4 Search engine library ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages aptitude recommends: pn aptitude-doc-en | aptitude-do none (no description available) pn libparse-debianchangelog-perl none (no description available) Versions of packages aptitude suggests: pn debtags none (no description available) ii tasksel 2.78 Tool for selecting tasks for insta -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555897: no documentation at all
package: live-magic version: 1.7 Hi, after installing live-magic there is no useful documentation on the system, nor a pointer to some online documentation, should that exist. man live-magic says: SYNOPSIS live-magic configuration_dir but there is no clue, where the configuration dir is, nor how to use it. (what the default values are and how to modify them.) regards, Holger signature.asc Description: This is a digitally signed message part.
Bug#352483: link broken on http://debian.org/ports/sparc/porting
Dear Sparc porters, On Sun, Nov 30, 2008 at 10:50:57PM +0100, Simon Paillard wrote: There is a broken link on http://www.debian.org/ports/sparc/porting as described by the bug below: On Sun, Feb 12, 2006 at 10:52:08AM +0100, Miguel Gea Milvaques wrote: Package: www.debian.org Severity: normal The link the SPARC buildd web pages that points to http://sparc.debian.org/ is broken. Could you please give us the replacement link for that ? http://buildd.debian.org/~jeroen/status/architecture.php?a=sparc ? https://buildd.debian.org/status/architecture.php?a=sparc is more neutral. Unless if you disagree, the link above will be used instead. I've attached the current wml file for this page so that you can easily provide us a patch. Thanks and best regards. -- Simon Paillard -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#553918: [Pkg-virtualbox-devel] Bug#553918: virtualbox-ose-source: Please, make dkms a recommendation.
Am Donnerstag, 12. November 2009 schrieb Michael Meskes: On Fri, Nov 06, 2009 at 08:06:33PM +0100, Wolfgang Walter wrote: 2) It therefor runs as root. And it even does if /lib/modules/installed kernel/source points to a non privileged build directory which is a security problem. I don't really see where the security problem is here. Would you mind explaining it? Say you built your kernel as user foo on one machine. Say /lib/modules/2.6.31.6/source or /lib/modules/2.6.31.6/build therefor may points to /home/foo/kernels/linux-2.6.31.6 Now you install that kernel on a different machine exposed where user foo exists, too. You now have to trust machine exposed. You must trust f...@exposed that it does not provide a manipulated /home/foo/kernels/linux-2.6.31.6 which will either produce a trojaned kernel module or simply uses errors in dkms, gcc, binutils, ... to gain root access. I think virtualbox should do it like other similar packages which build kernel modules: virtualbox-ose-source for building binary-modules as self-sufficent deb-packages virtualbox-ose-dkms for the dkms approach Sehe batman-adv-source|dkms or openafs-modules-source|dkms Regards, -- Wolfgang Walter Studentenwerk München Anstalt des öffentlichen Rechts Leiter EDV Leopoldstraße 15 80802 München Tel: +49 89 38196 276 Fax: +49 89 38196 150 Email: wolfgang.wal...@stwm.de http://www.studentenwerk-muenchen.de/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#551654: Solution
Package: compiz
Severity: normal
Tags: patch
After I tried every possible solution (my primary suspect was metacity)
most obvious solution came to my mind ... Mesa.
I installed libgl1-mesa-glx, and reinstalled libgl1-mesa-dri and
libglu1-mesa and mesa-utils, after I restarted X compiz
was back working as good as new.
As bug fix I'm including control file where libgl1-mesa-glx is in
Depends-Depends for Compiz package.
Adnan
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (200, 'testing'), (100, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages compiz depends on:
ii compiz-core 0.8.2-6OpenGL window and
compositing mana
ii compiz-gnome 0.8.2-6OpenGL window and
compositing mana
ii compiz-gtk0.8.2-6OpenGL window and
compositing mana
ii compiz-plugins0.8.2-6OpenGL window and
compositing mana
compiz recommends no packages.
Versions of packages compiz suggests:
ii compizconfig-settings-manager 0.8.2-2Compizconfig Settings
Manager
-- no debconf information
Source: compiz
Section: x11
Priority: optional
Maintainer: Debian X Strike Force debia...@lists.debian.org
Uploaders: Thierry Reding thie...@gilfi.de, David Nusinow
dnusi...@debian.org, Sean Finney sean...@debian.org
Build-Depends: autoconf, automake1.9, autotools-dev,
debhelper (= 5), intltool,
kdebase-workspace-dev,
libcairo2-dev, libdbus-qt-1-dev,
libdbus-glib-1-dev, libgconf2-dev,
libgl1-mesa-dev (= 6.5.1) | libgl-dev, libglib2.0-dev, libgnome-desktop-dev,
libgl1-mesa-glx (= 6.5.1),
libgnomeui-dev,
libgnome-window-settings-dev, libgtk2.0-dev, libice-dev (= 1:1.0.1),
libmetacity-dev, libpango1.0-dev, libpng12-dev | libpng-dev, librsvg2-dev,
libsm-dev (= 1:1.0.1), libtool, libwnck-dev, libxcomposite-dev (= 1:0.3-2),
libxdamage-dev (=1:1.0.3), libxfixes-dev (= 1:4.0.1), libxinerama-dev,
libxml-parser-perl, libxrandr-dev (= 2:1.1.0.2), libxrender-dev (= 1:0.9.1),
libxcursor-dev,
libxml2-dev, libxslt1-dev,
libstartup-notification0-dev (= 0.7),
quilt (= 0.40), x11proto-gl-dev (= 1.4.8), xsltproc
Standards-Version: 3.8.1
Vcs-Git: git://git.debian.org/git/pkg-xorg/app/compiz.git
Vcs-Browser: http://git.debian.org/?p=pkg-xorg/app/compiz.git
Package: compiz
Architecture: all
Depends: compiz-core (= ${source:Version}), compiz-plugins (=
${source:Version}), compiz-gtk (= ${source:Version}), compiz-gnome (=
${source:Version}), ${misc:Depends}
Suggests: compizconfig-settings-manager
Description: OpenGL window and compositing manager
Compiz brings to life a variety of visual effects that make the Linux desktop
easier to use, more powerful and intuitive, and more accessible for users
with special needs.
.
This metapackage provides the components necessary for running compiz. It
provides the compiz core, a set of standard plugins, a window decorator using
the Gtk toolkit and the files necessary to integrate compiz with the GNOME
desktop environment.
Package: compiz-core
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, mesa-utils
Breaks: libcompizconfig0 ( 0.8.0)
Recommends: compiz-plugins (= ${binary:Version})
Suggests: nvidia-glx (= 1.0.9625-1)
Provides: compiz-core-abiversion-${coreabiversion}
Description: OpenGL window and compositing manager
Compiz brings to life a variety of visual effects that make the Linux desktop
easier to use, more powerful and intuitive, and more accessible for users
with special needs.
.
Compiz combines together a window manager and a composite manager using
OpenGL for rendering. A window manager allows the manipulation of the
multiple applications and dialog windows that are presented on the screen. A
composite manager allows windows and other graphics to be combined together
to create composite images. Compiz achieves its stunning effects by doing
both of these functions.
Package: compiz-dev
Architecture: any
Depends: compiz-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends},
libgl1-mesa-dev | libgl-dev, libpng-dev, libxcomposite-dev (= 1:0.3-2),
libxfixes-dev (= 1:4.0.1), libxdamage-dev (= 1:1.0.3), libxinerama-dev,
libxrandr-dev (= 2:1.1.0.2), libxcursor-dev, libice-dev (= 1:1.0.1),
libsm-dev (= 1:1.0.1), libstartup-notification0-dev (= 0.7), libxslt1-dev,
libxml2-dev
Description: OpenGL window and compositing manager - development files
Compiz brings to life a variety of visual effects that make the Linux desktop
easier to use, more powerful and intuitive, and more accessible for users
with special needs.
.
This package contains the headers and libraries needed to compile compiz
plugins.
Package: compiz-gtk
Architecture: any
Depends: compiz-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Replaces: compiz-plugins (
Bug#555899: debhelper: deprecated compat level in manpage
Package: debhelper Version: 7.2.3 Severity: minor Compat level 4 is deprecated since version 7.2.3, please update accordingly the man page: in the NOTES section the last deprecated mode is V3. ciao, Riccardo -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554607: Bug is fixed upstream
Hi, The bug I reported a few days ago is fixed upstream by the following patch to be applied to src/xterm.c. --- xterm.c 2009/10/19 18:08:55 1.1046 +++ xterm.c 2009/10/20 10:03:37 1.1047 @@ -7125,7 +7125,7 @@ #ifdef HAVE_X_I18N /* Filter events for the current X input method. */ if (x_filter_event (terminal-display_info.x, event)) -break; +continue; #endif event_found = 1; http://cvs.savannah.gnu.org/viewvc/emacs/src/xterm.c?root=emacsr1=1.1046r2=1.1047 Regards, Arnaud
Bug#555853: blueman: Blueman can connect to the device, but unfortunatley it refuses the DUN connection.
A.A. Spitsyn wrote: Package: blueman Version: 1.10-1~ppa3i Please consider first using a Debian package before filing a bug against it... If the bug should exist in 1.21-1, please try building it using the option and report back. Thanks -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555824: dpkg removed a package when told to upgrade it
Could you upload your packages somewhere? I would like to reproduce the problem. Cheers, Sven -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555897: no documentation at all
2009/11/12 Holger Levsen hol...@layer-acht.org: package: live-magic version: 1.7 Hi, after installing live-magic there is no useful documentation on the system, nor a pointer to some online documentation, should that exist. man live-magic says: SYNOPSIS live-magic configuration_dir but there is no clue, where the configuration dir is, nor how to use it. (what the default values are and how to modify them.) It's supposed to be magic so perhaps it would work by itself ;-) If not then it's definitely a bug. Thanks Michal -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#553326: blueman: can't connect when there are non-numeric connection ids in gconf
You're right. I've talked to the upstream author and he fixed it in current trunk. Thanks for reporting -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555505: segfault in gdm on first login
On Wed, 11 Nov 2009 17:15:19 +0100 Josselin Mouette j...@debian.org wrote: Le mardi 10 novembre 2009 à 10:35 +0800, clayton a écrit : This may be related to http://bugs.debian.org/480469 as well The first time I login with GDM I get a black screen followed by a re-display of the GDM login prompt. Thereafter login works. I am seeing this in syslog at the time of the GDM failure: acpid: client connected from 2278[0:0] acpid: 1 client rule loaded kernel: [ 179.880427] gdm[2271]: segfault at bfe61a85 ip b75a72da sp bfbee680 error 4 in libc-2.10.1.so[b7534000+141000] It would be interesting to have a backtrace for that. If you could start up gdm by hand in a gdb session and obtain it, it would be great. Delighted to!! I also confirmed in the process that this happens only once on boot. Logging out and restarting gdm are not sufficient to trigger a second incident. Hope this gdb of gdm helps: (gdb) cont Continuing. Program received signal SIGUSR2, User defined signal 2. 0xb8070424 in __kernel_vsyscall () (gdb) backtrace #0 0xb8070424 in __kernel_vsyscall () #1 0xb77b1f33 in __write_nocancel () #from /lib/i686/cmov/libpthread.so.0 2 0x08071271 in ?? () #3 0x0806179d in ?? () #4 0x08061b26 in ?? () #5 0x080648c0 in ?? () #6 0x08078072 in ?? () #7 0x08066255 in ?? () #8 0x0806b440 in ?? () #9 0x0805ce08 in ?? () #10 0x08051ea2 in ?? () #11 0x080529b8 in ?? () #12 0xb7571b35 in __libc_start_main () from /lib/i686/cmov/libc.so.6 #13 0x0804fc91 in ?? () (gdb) (gdb) cont Continuing. Program received signal SIGSEGV, Segmentation fault. 0xb75ce2da in strcmp () from /lib/i686/cmov/libc.so.6 (gdb) backtrace #0 0xb75ce2da in strcmp () from /lib/i686/cmov/libc.so.6 #1 0xb75e55bf in ?? () from /lib/i686/cmov/libc.so.6 #2 0xb75e5760 in ?? () from /lib/i686/cmov/libc.so.6 #3 0xb75e674b in ?? () from /lib/i686/cmov/libc.so.6 #4 0xb75e602e in ?? () from /lib/i686/cmov/libc.so.6 #5 0xb75e468c in localtime_r () from /lib/i686/cmov/libc.so.6 #6 0xb762602b in __vsyslog_chk () from /lib/i686/cmov/libc.so.6 #7 0xb7626597 in syslog () from /lib/i686/cmov/libc.so.6 #8 0xb8054566 in pam_vsyslog () from /lib/libpam.so.0 #9 0xb8054682 in pam_syslog () from /lib/libpam.so.0 #10 0xb70d1dc6 in pam_sm_open_session () #from /lib/security/pam_ck_connector.so 11 0xb804f4cd in ?? () #from /lib/libpam.so.0 12 0xb80537eb in pam_open_session () #from /lib/libpam.so.0 13 0x0807879f in ?? () #14 0x08066255 in ?? () #15 0x0806b440 in ?? () #16 0x0805ce08 in ?? () #17 0x08051ea2 in ?? () #18 0x080529b8 in ?? () #19 0xb7571b35 in __libc_start_main () from /lib/i686/cmov/libc.so.6 #20 0x0804fc91 in ?? () (gdb) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555900: VCS links in debian/control dead
Package: roundcube Version: 0.3.1-1 Tags: patch Hi *, The VCS links in roundcube are wrong as of revision 254 in Subversion. Please apply attached fix. Thanks, Torsten diff --git a/debian/control b/debian/control index 789ab6a..ed4b59d 100644 --- a/debian/control +++ b/debian/control @@ -6,8 +6,8 @@ Uploaders: Vincent Bernat ber...@debian.org, Romain Beauxis to...@rastageeks. Build-Depends: cdbs, debhelper, quilt, patchutils (= 0.2.25), cdbs (= 0.4.27), po-debconf Homepage: http://www.roundcube.net/ Standards-Version: 3.8.3 -Vcs-Svn: svn://svn.debian.org/svn/pkg-roundcube/roundcube -Vcs-Browser: http://svn.debian.org/wsvn/pkg-roundcube/roundcube +Vcs-Svn: svn://svn.debian.org/svn/pkg-roundcube/trunk +Vcs-Browser: http://svn.debian.org/wsvn/pkg-roundcube/trunk/ Package: roundcube-core Architecture: all diff --git a/debian/control.in b/debian/control.in index 4d3065e..72d681f 100644 --- a/debian/control.in +++ b/debian/control.in @@ -6,8 +6,8 @@ Uploaders: Vincent Bernat ber...@debian.org, Romain Beauxis to...@rastageeks. Build-Depends: @cdbs@, po-debconf Homepage: http://www.roundcube.net/ Standards-Version: 3.8.3 -Vcs-Svn: svn://svn.debian.org/svn/pkg-roundcube/roundcube -Vcs-Browser: http://svn.debian.org/wsvn/pkg-roundcube/roundcube +Vcs-Svn: svn://svn.debian.org/svn/pkg-roundcube/trunk +Vcs-Browser: http://svn.debian.org/wsvn/pkg-roundcube/trunk/ Package: roundcube-core Architecture: all
Bug#555869: FTBFS with binutils-gold
Hello,
just adding the missing linking argument -ldl to libosg.so solves the
error. I have recompiled with -Wl,--no-undefined succesfully with this
patch:
Index: CMakeLists.txt
===
--- src/osg/CMakeLists.txt (revisión: 10740)
+++ src/osg/CMakeLists.txt (copia de trabajo)
@@ -331,7 +331,7 @@
LINK_INTERNAL(${LIB_NAME}
OpenThreads
)
-LINK_EXTERNAL(${LIB_NAME} ${CMAKE_THREAD_LIBS_INIT}${MATH_LIBRARY} )
+LINK_EXTERNAL(${LIB_NAME} ${CMAKE_THREAD_LIBS_INIT}${MATH_LIBRARY} -ldl )
LINK_CORELIB_DEFAULT(${LIB_NAME} ${CMAKE_THREAD_LIBS_INIT} ${MATH_LIBRARY} )
INCLUDE(ModuleInstall OPTIONAL)
Regards,
Alberto
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#553632: junior-config: A manual fix
Package: junior-config Version: 1.16 Severity: normal I checked the contents of /etc/blends/junior, and found: s...@deblack:/etc/blends/junior$ ls junior.conf~ junior.conf.cdd junior.conf.dpkg-old~ junior.conf.dpkg-old.cdd So I manually renamed junior.conf~ to junior.conf. After that, $ sudo aptitude reinstall junior-config seems to have worked. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages junior-config depends on: ii adduser 3.111 add and remove users and groups ii blends-common 0.6.7 Debian Pure Blends common package ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii menu 2.1.42 generates programs menu for all me junior-config recommends no packages. junior-config suggests no packages. -- debconf information: shared/junior-config/usermenus: never shared/junior-config/useusermenus: * junior-config/group: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#545426: serial console instructions not migrated from grub-legacy
I used the same steps to get serial working again, except that I also had to add GRUB_CMDLINE_LINUX=console=ttyS0,9600n8 (kopt was *not* preserved). (This host was converted on 8 Sep 2009, so maybe the changelog entry about kopt in 1.97~beta3-1 would have fixed that?) Mike Stone -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555892: RFP: ptouch-driver -- CUPS/Foomatic driver for Brother P-touch, label printers
Thank you for your work on packaging the ptouch driver. I have tried it and I have done the following changes: 1. I have corrected the upstream version number of the Debian package. It must be 0.13. 2. I have added a margin definition to the driver/ptouch.xml file assuming zero margins. Now the PPD coming out is the same as your hand-edited PPD. I did not do the following yet, but I would do it when making a Ubuntu package: 1. The 2 changes in the original source code should be supplied as patches 2. There should be a post-install script updating the PPD files of already existing print queues as all Ubuntu printer driver packages have. The new ptouch-driver_0.13-1.diff.gz is attached. make sure to rename the upstream tarball to ptouch-driver_0.13.orig.tar.gz when using the new .diff.gz. Till ptouch-driver_0.13-1.diff.gz Description: Unix tar archive
Bug#555412: iceweasel: Iceweasel often crash when closing a tab
On Thu, Nov 12, 2009 at 02:44:16PM +0100, VALETTE Eric RD-MAPS-REN wrote: What version of libcairo2 are you using ? libcairo2 1.9.4-1 Try downgrading to libcairo 1.8.8-2, it should fix your problem. Mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555901: Update multipath-tools to fix rdac path checked leads to I/O hang when volumes are unmapped from storage.
Package: multipath-tools
Version: 0.4.8-15.1
Severity: normal
Hi,
the following bug report and patch was posted on dm-devel some days ago, please
update the package in Debian when the fix hits upstream's git. I'll be happy to
work on a backport if you want me to.
Cheers,
Bernd
Original Message
Subject: [dm-devel] [Patch] multipath-tools: rdac path checked leads to I/O hang
when volumes are unmapped from storage.
Date: Tue, 20 Oct 2009 18:39:15 +0530
From: Chauhan, Vijay vijay.chau...@lsi.com
Reply-To: device-mapper development dm-de...@redhat.com
To: device-mapper development dm-de...@redhat.com,
christophe.varo...@free.fr christophe.varo...@free.fr
CC: Dachepalli, Sudhir sudhir.dachepa...@lsi.com,
sekha...@linux.vnet.ibm.com sekha...@linux.vnet.ibm.com, Moger, Babu
babu.mo...@lsi.com
Hi,
We are seeing I/O hang when volumes (configured with rdac path checker) are
unmapped from the storage. Expected is I/O should fail. Please see the syslog
snippet below:
Oct 15 14:40:43 linux kernel: sd 6:0:0:0: queueing MODE_SELECT command.
Oct 15 14:40:43 linux kernel: sd 6:0:0:0: MODE_SELECT failed with sense
0x59100.
Oct 15 14:40:43 linux kernel: end_request: I/O error, dev sdh, sector 18509824
Oct 15 14:40:43 linux kernel: device-mapper: multipath: Failing path 8:112.
Oct 15 14:40:43 linux kernel: end_request: I/O error, dev sdh, sector 0
Oct 15 14:40:43 linux kernel: end_request: I/O error, dev sdh, sector 18512896
Oct 15 14:40:43 linux kernel: end_request: I/O error, dev sdh, sector 18511872
Oct 15 14:40:43 linux kernel: end_request: I/O error, dev sdh, sector 18510848
Oct 15 14:40:43 linux multipathd: 8:112: mark as failed
Oct 15 14:40:43 linux multipathd: 3600a0b800029ea5297bc4acde51e: Entering
recovery mode: max_retries=30
Oct 15 14:40:44 linux multipathd: 3600a0b800029eb0af2af4acde4d1:
queue_if_no_path enabled
Oct 15 14:40:44 linux multipathd: 3600a0b800029eb0af2af4acde4d1: Recovered
to normal mode
Oct 15 14:40:44 linux kernel: sd 5:0:0:1: queueing MODE_SELECT command.
Oct 15 14:40:44 linux kernel: sd 5:0:0:1: MODE_SELECT failed with sense
0x59100.
Oct 15 14:40:44 linux kernel: end_request: I/O error, dev sdc, sector 0
Oct 15 14:40:44 linux kernel: device-mapper: multipath: Failing path 8:32.
Oct 15 14:40:44 linux kernel: end_request: I/O error, dev sdc, sector 16089088
Oct 15 14:40:44 linux kernel: end_request: I/O error, dev sdc, sector 16090112
Oct 15 14:40:44 linux kernel: end_request: I/O error, dev sdc, sector 16091136
Oct 15 14:40:44 linux kernel: end_request: I/O error, dev sdc, sector 16092160
Oct 15 14:40:44 linux multipathd: 8:32: mark as failed
Below is the patch that fix this issue. When devices are unmapped from storage,
rdac patch checker sets the path state for those devices as ghost. As a reason
dm issues mode select to failover path group and fails with 0x59100, which
eventually ends up with ping pong between path groups resulting in I/O hang. In
rdac path checker, we need to check if devices are not connected, mark it as
failed. This patch adds check for Peripheral Qualifier (PQ) Peripheral Device
type(PDT) of Inquiry data and fails the path if either 1) PQ is set to 0x1 or 2)
PQ set to 0x11 and PDT set to 0x1F.
Signed-off-by: Vijay Chauhan vijay.chau...@lsi.com
Reviewed-by: Babu Moger babu.mo...@lsi.com
---
--- multipath-tools/libmultipath/checkers/rdac.c.orig 2009-10-20
23:01:50.0 +0530
+++ multipath-tools/libmultipath/checkers/rdac.c2009-10-20
23:49:31.0 +0530
@@ -91,7 +91,8 @@ do_inq(int sg_fd, unsigned int pg_op, vo
struct volume_access_inq
{
- char dontcare0[8];
+ char PQ_PDT;
+ char dontcare0[7];
char avtcvp;
char dontcare1[39];
};
@@ -105,6 +106,11 @@ libcheck_check (struct checker * c)
if (0 != do_inq(c-fd, 0xC9, inq, sizeof(struct volume_access_inq))) {
MSG(c, MSG_RDAC_DOWN);
return PATH_DOWN;
+ } else {
+ if ((inq.PQ_PDT 0x20) || (inq.PQ_PDT 0x7f)) {
+ /* LUN not connected*/
+ return PATH_DOWN;
+ }
}
if (inq.avtcvp 0x1) {
--
--
dm-devel mailing list
dm-de...@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
--
Bernd ZeimetzDebian GNU/Linux Developer
http://bzed.dehttp://www.debian.org
GPG Fingerprints: 06C8 C9A2 EAAD E37E 5B2C BE93 067A AD04 C93B FF79
ECA1 E3F2 8E11 2432 D485 DD95 EB36 171A 6FF9 435F
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555902: xen-utils-3.4: /etc/init.d/xend - $DAEMON variable at xend_stop()
Package: xen-utils-3.4 Version: 3.4.0-2 Severity: normal Hi, the variable $DAEMON in /etc/init.d/xend is not set and thus the init.d/-script is not usable. I think it's supposed to be $XEND. Any ideas on that one? regards, Patrick -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.31.5xen-unstable (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xen-utils-3.4 depends on: ii e2fslibs 1.41.9-1 ext2/ext3/ext4 file system librari ii iproute20090324-1networking and traffic control too ii libc6 2.10.1-5 GNU C Library: Shared libraries ii libgcrypt111.4.4-5 LGPL Crypto library - runtime libr ii libncurses55.7+20090803-2shared libraries for terminal hand ii libxenstore3.0 3.4.0-2 Xenstore communications library fo ii python 2.5.4-2 An interactive high-level object-o ii python-central 0.6.12+nmu1 register and build utility for Pyt ii python2.5 2.5.4-2 An interactive high-level object-o ii udev 146-5 /dev/ and hotplug management daemo ii xen-utils-common 3.3.1-2 XEN administrative tools - common ii zlib1g 1:1.2.3.3.dfsg-15 compression library - runtime Versions of packages xen-utils-3.4 recommends: ii bridge-utils 1.4-5 Utilities for configuring the Linu ii xen-hypervisor-3.4-amd64 [xen 3.4.0-2The Xen Hypervisor on AMD64 Versions of packages xen-utils-3.4 suggests: pn xen-docs-3.4 none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#555903: udev runs on 2.2.26 but checks for 2.6.28
Package: udev Version: 147-2 Severity: important udev runs on an 2.2.26 kernel, but the init-script tests if the kernel is at least of version 2.6.28. Either the error message is false or the regexp to check the kernel version. I changed the regexp and udev runs on my 26.26 kernel. BTW: It is important that udev runs on 2.6.26 because this is the highest kernel version of debian suported xen kernel. -- Package-specific info: -- /etc/udev/rules.d/: /etc/udev/rules.d/: total 8 -rw-r--r-- 1 root root 3399 Oct 8 23:31 70-persistent-cd.rules -rw-r--r-- 1 root root 1064 Sep 29 18:54 70-persistent-net.rules lrwxrwxrwx 1 root root 20 Jul 15 14:17 z60_xen-backend.rules - ../xen-backend.rules -- /sys/: /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4/dev /sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5/dev /sys/devices/pci:00/:00:06.0/:0a:00.0/host0/target0:0:0/0:0:0:0/block/sda/dev /sys/devices/pci:00/:00:06.0/:0a:00.0/host0/target0:0:0/0:0:0:0/block/sda/sda1/dev /sys/devices/pci:00/:00:06.0/:0a:00.0/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0/dev /sys/devices/pci:00/:00:06.0/:0a:00.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0/dev /sys/devices/pci:00/:00:06.0/:0a:00.0/host0/target0:0:16/0:0:16:0/bsg/0:0:16:0/dev /sys/devices/pci:00/:00:06.0/:0a:00.0/host0/target0:0:16/0:0:16:0/scsi_generic/sg1/dev /sys/devices/pci:00/:00:1d.0/usb2/2-0:1.0/usb_endpoint/usbdev2.1_ep81/dev /sys/devices/pci:00/:00:1d.0/usb2/dev /sys/devices/pci:00/:00:1d.0/usb2/usb_device/usbdev2.1/dev /sys/devices/pci:00/:00:1d.0/usb2/usb_endpoint/usbdev2.1_ep00/dev /sys/devices/pci:00/:00:1d.0/usbmon/usbmon2/dev /sys/devices/pci:00/:00:1d.1/usb3/3-0:1.0/usb_endpoint/usbdev3.1_ep81/dev /sys/devices/pci:00/:00:1d.1/usb3/dev /sys/devices/pci:00/:00:1d.1/usb3/usb_device/usbdev3.1/dev /sys/devices/pci:00/:00:1d.1/usb3/usb_endpoint/usbdev3.1_ep00/dev /sys/devices/pci:00/:00:1d.1/usbmon/usbmon3/dev /sys/devices/pci:00/:00:1d.2/usb4/4-0:1.0/usb_endpoint/usbdev4.1_ep81/dev /sys/devices/pci:00/:00:1d.2/usb4/dev /sys/devices/pci:00/:00:1d.2/usb4/usb_device/usbdev4.1/dev /sys/devices/pci:00/:00:1d.2/usb4/usb_endpoint/usbdev4.1_ep00/dev /sys/devices/pci:00/:00:1d.2/usbmon/usbmon4/dev /sys/devices/pci:00/:00:1d.3/usb5/5-0:1.0/usb_endpoint/usbdev5.1_ep81/dev /sys/devices/pci:00/:00:1d.3/usb5/dev /sys/devices/pci:00/:00:1d.3/usb5/usb_device/usbdev5.1/dev /sys/devices/pci:00/:00:1d.3/usb5/usb_endpoint/usbdev5.1_ep00/dev /sys/devices/pci:00/:00:1d.3/usbmon/usbmon5/dev /sys/devices/pci:00/:00:1d.7/usb1/1-0:1.0/usb_endpoint/usbdev1.1_ep81/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.0/host2/target2:0:0/2:0:0:0/block/sr2/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.0/host2/target2:0:0/2:0:0:0/bsg/2:0:0:0/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.0/host2/target2:0:0/2:0:0:0/scsi_generic/sg4/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.0/usb_endpoint/usbdev1.2_ep02/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.0/usb_endpoint/usbdev1.2_ep81/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.1/host3/target3:0:0/3:0:0:0/block/sr0/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.1/host3/target3:0:0/3:0:0:0/bsg/3:0:0:0/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.1/host3/target3:0:0/3:0:0:0/scsi_generic/sg2/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.1/usb_endpoint/usbdev1.2_ep04/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.1/usb_endpoint/usbdev1.2_ep83/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.2/host4/target4:0:0/4:0:0:0/block/sr1/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.2/host4/target4:0:0/4:0:0:0/bsg/4:0:0:0/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.2/host4/target4:0:0/4:0:0:0/scsi_generic/sg3/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.2/usb_endpoint/usbdev1.2_ep06/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.2/usb_endpoint/usbdev1.2_ep85/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.3/host5/target5:0:0/5:0:0:0/block/sr3/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.3/host5/target5:0:0/5:0:0:0/bsg/5:0:0:0/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.3/host5/target5:0:0/5:0:0:0/scsi_generic/sg5/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.3/usb_endpoint/usbdev1.2_ep08/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.3/usb_endpoint/usbdev1.2_ep87/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.4/input/input2/event2/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.4/input/input2/js0/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.4/input/input2/mouse1/dev /sys/devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.4/usb_endpoint/usbdev1.2_ep89/dev
Bug#555211: Potential patch for this bug
tags 555211 + patch thanks Hi! Please find attached an untested patch for this bug. The package does become buildable, though. Thanks. Kumar diff -Nru --exclude changelog gst0.10-python-0.10.17/debian/control gst0.10-python-0.10.17/debian/control --- gst0.10-python-0.10.17/debian/control 2009-11-12 07:49:32.0 -0600 +++ gst0.10-python-0.10.17/debian/control 2009-11-12 07:49:32.0 -0600 @@ -17,7 +17,7 @@ python-gobject-dbg, python-all-dev (= 2.3.5-11), python-all-dbg, - python-central (= 0.6.11), + python-support (= 0.7.6), autotools-dev, quilt Standards-Version: 3.8.3 diff -Nru --exclude changelog gst0.10-python-0.10.17/debian/python-gst0.10-dev.preinst gst0.10-python-0.10.17/debian/python-gst0.10-dev.preinst --- gst0.10-python-0.10.17/debian/python-gst0.10-dev.preinst 1969-12-31 18:00:00.0 -0600 +++ gst0.10-python-0.10.17/debian/python-gst0.10-dev.preinst 2009-11-12 07:49:32.0 -0600 @@ -0,0 +1,8 @@ +#!/bin/sh +# TODO: remove this file after releasing Squeeze +set -e +if [ $1 = upgrade ] dpkg --compare-versions $2 lt 0.10.17-2 +then +pycentral pkgremove python-gst0.10-dbg +fi +#DEBHELPER# diff -Nru --exclude changelog gst0.10-python-0.10.17/debian/rules gst0.10-python-0.10.17/debian/rules --- gst0.10-python-0.10.17/debian/rules 2009-11-12 07:49:32.0 -0600 +++ gst0.10-python-0.10.17/debian/rules 2009-11-12 07:49:32.0 -0600 @@ -11,8 +11,6 @@ PY_DEFAULT := $(shell pyversions --default) PY_VERSIONS = $(sort $(shell pyversions --requested) $(PY_DEFAULT)) -include /usr/share/pycentral-data/pycentral.mk - PATCH_DIR := debian/patches configure_flags := --prefix=/usr @@ -142,7 +140,7 @@ dh_strip -s -Npython-gst0.10-dbg --dbg-package=python-gst0.10-dbg dh_compress -s -Xexample dh_fixperms -s - DH_PYCENTRAL=include-links dh_pycentral -s + dh_pysupport -s dh_installdeb -s dh_shlibdeps -s dh_gencontrol -s
Bug#555904: zim: crash on Time Date insert
Package: zim Version: 0.25-1 Severity: normal The Zim crashes each time I try to insert Date Time. I tried bot ways - through Insert menu option and Ctrl+D hotkey. It is not very critical, but it would be good to have this feature working. ps It seems like Zim is what I was looking for :) -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages zim depends on: ii libfile-basedir-perl 0.03-0.1Perl module to use the freedesktop ii libfile-desktopentry-per 0.04-1 Perl module to handle freedesktop ii libfile-mimeinfo-perl0.15-1 Perl module to determine file type ii libgtk2-perl 1:1.190-1 Perl interface to the 2.x series o ii perl 5.10.0-19lenny2 Larry Wall's Practical Extraction Versions of packages zim recommends: ii libgtk2-spell-perl1.03-2+b1 Perl interface to the GtkSpell lib Versions of packages zim suggests: ii desktop-file-utils0.15-1 Utilities for .desktop files -- no debconf information System: Linux 2.6.26-2-686 #1 SMP Wed Nov 4 20:45:37 UTC 2009 i686 X Vendor: The X.Org Foundation X Vendor Release: 10402000 Selinux: No Accessibility: Disabled GTK+ Theme: Clearlooks Compact Icon Theme: BlankOn Memory status: size: 42565632 vsize: 42565632 resident: 30715904 share: 11231232 rss: 30715904 rss_rlim: 4294967295 CPU usage: start_time: 1258030204 rtime: 928 utime: 870 stime: 58 cutime:6 cstime: 2 timeout: 0 it_real_value: 0 frequency: 100 Backtrace was generated from '/usr/bin/zim' (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread 0xb7de28c0 (LWP 15011)] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) 0xb7fc8424 in __kernel_vsyscall () #0 0xb7fc8424 in __kernel_vsyscall () #1 0xb7f7dfc3 in __waitpid_nocancel () from /lib/i686/cmov/libpthread.so.0 #2 0xb7b62993 in g_spawn_sync () from /usr/lib/libglib-2.0.so.0 #3 0xb7b62c9c in g_spawn_command_line_sync () from /usr/lib/libglib-2.0.so.0 #4 0xb6e9e3bd in ?? () from /usr/lib/gtk-2.0/modules/libgnomebreakpad.so #5 0xb6e9e4c2 in ?? () from /usr/lib/gtk-2.0/modules/libgnomebreakpad.so #6 signal handler called #7 0x080a6f88 in Perl_av_clear () #8 0x080e12d8 in Perl_leave_scope () #9 0x080e136c in Perl_pop_scope () #10 0x080ed696 in Perl_pp_return () #11 0x080b1879 in Perl_runops_standard () #12 0x080aba15 in Perl_call_sv () #13 0x0809cb2c in Perl_magic_setpack () #14 0x0809ffcd in Perl_mg_set () #15 0x080b898c in Perl_pp_aassign () #16 0x080b1879 in Perl_runops_standard () #17 0x080abd08 in Perl_call_sv () #18 0xb7c21190 in ?? () from /usr/lib/perl5/auto/Glib/Glib.so #19 0x09716008 in ?? () #20 0x09fb40d8 in ?? () #21 0x0006 in ?? () #22 0xb7baf1a6 in g_closure_ref () from /usr/lib/libgobject-2.0.so.0 #23 0xb7bb090b in
