Bug#613727: closed by "Arthur Clerk" (reply to ) (Hope you're keeping safe)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Tuesday 18 May 2021, Debian Bug Tracking System was heard to say: > This is an automatic notification regarding your Bug report > which was filed against the wicd package: > > #613727: wicd should conflict with network-manager > > It has been closed by "Arthur Clerk" (reply to > ). > > Their explanation is attached below along with your original > report. If this explanation is unsatisfactory and you have not > received a better one in a separate message then please contact > "Arthur Clerk" (reply to ) > by replying to this email. I'm astounded a bug report from 2011 hadn't been closed long since. Thank you for looking at it, I rather liked wicd. Oh well, time marches on. Curt- - -- You may my glories and my state dispose, But not my griefs; still am I king of those. --- William Shakespeare, "Richard II" -BEGIN PGP SIGNATURE- iHUEAREIAB0WIQTaYVhJsIalt8scIDa2T1fo1pHhqQUCYKOo9wAKCRC2T1fo1pHh qTl9AQDVn2QMR4XfeZd/wyKuqGLoJHB7+epOE9vwpxevbdJb0QEAowfAXgCO1zbp x7yC7uzUmQUjdehwVq8d6YYTWgJqKDs= =fyG3 -END PGP SIGNATURE-
Bug#680278: linux-image-3.2.0-3-686-pae: Fails to mount removable media
Package: src Version: 3.2.21-3 Severity: important Good morning. I have updated two laptops and a desktop system with the same result, plugging in a USB thumb drive fails to automount, and trying to mount the device gets the error Permissions problem. However, one system still has kernel 3.2.0.2, and when booted in 3.2.0.2 instead of 3.2.0.3, the thumb drives mount just fine. -- Package-specific info: ** Version: Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=1a7b930a-500b-4ae9-8983-d64233d9d599 ro vga=791 quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 11.651134] RPC: Registered udp transport module. [ 11.651139] RPC: Registered tcp transport module. [ 11.651144] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.755751] FS-Cache: Loaded [ 11.807936] FS-Cache: Netfs 'nfs' registered for caching [ 11.842557] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 13.371575] r8169 :01:00.0: eth0: link up [ 13.371978] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.353948] lp: driver loaded but no devices found [ 18.542335] ppdev: user-space parallel port driver [18858.572143] usb 6-1: new full-speed USB device number 4 using ohci_hcd [18858.747433] usb 6-1: New USB device found, idVendor=03f0, idProduct=2911 [18858.747443] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18858.747451] usb 6-1: Product: PSC 2200 Series [18858.747456] usb 6-1: Manufacturer: Hewlett-Packard [18858.747461] usb 6-1: SerialNumber: MY26EB24980G [18858.750214] scsi10 : usb-storage 6-1:1.3 [18859.065485] Did not find alt setting 1 for intf 0, config 1 [18859.755480] scsi 10:0:0:0: Direct-Access HP psc 2210 1.00 PQ: 0 ANSI: 2 [18859.776478] sd 10:0:0:0: [sdf] Attached SCSI removable disk [25908.778697] CE: hpet increased min_delta_ns to 20113 nsec [26315.412105] usb 4-2: new high-speed USB device number 2 using ehci_hcd [26316.303905] usb 4-2: New USB device found, idVendor=05dc, idProduct=a790 [26316.303915] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [26316.303923] usb 4-2: Product: USB Flash Drive [26316.303928] usb 4-2: Manufacturer: UFD [26316.303933] usb 4-2: SerialNumber: AA0401118029 [26316.307759] scsi11 : usb-storage 4-2:1.0 [26317.305304] scsi 11:0:0:0: Direct-Access UFD USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [26317.308911] sd 11:0:0:0: [sdg] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB) [26317.309652] sd 11:0:0:0: [sdg] Write Protect is off [26317.309655] sd 11:0:0:0: [sdg] Mode Sense: 43 00 00 00 [26317.310422] sd 11:0:0:0: [sdg] No Caching mode page present [26317.310425] sd 11:0:0:0: [sdg] Assuming drive cache: write through [26317.314154] sd 11:0:0:0: [sdg] No Caching mode page present [26317.314157] sd 11:0:0:0: [sdg] Assuming drive cache: write through [26317.356122] sdg: sdg1 [26317.359797] sd 11:0:0:0: [sdg] No Caching mode page present [26317.359808] sd 11:0:0:0: [sdg] Assuming drive cache: write through [26317.359816] sd 11:0:0:0: [sdg] Attached SCSI removable disk [26418.424618] usb 4-2: USB disconnect, device number 2 [26422.720145] usb 4-2: new high-speed USB device number 3 using ehci_hcd [26423.614868] usb 4-2: New USB device found, idVendor=05dc, idProduct=a790 [26423.614878] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [26423.614886] usb 4-2: Product: USB Flash Drive [26423.614891] usb 4-2: Manufacturer: UFD [26423.614896] usb 4-2: SerialNumber: AA0401118029 [26423.615475] scsi12 : usb-storage 4-2:1.0 [26424.613419] scsi 12:0:0:0: Direct-Access UFD USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [26424.616740] sd 12:0:0:0: [sdg] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB) [26424.617493] sd 12:0:0:0: [sdg] Write Protect is off [26424.617498] sd 12:0:0:0: [sdg] Mode Sense: 43 00 00 00 [26424.618375] sd 12:0:0:0: [sdg] No Caching mode page present [26424.618380] sd 12:0:0:0: [sdg] Assuming drive cache: write through [26424.623761] sd 12:0:0:0: [sdg] No Caching mode page present [26424.623772] sd 12:0:0:0: [sdg] Assuming drive cache: write through [26424.665561] sdg: sdg1 [26424.668487] sd 12:0:0:0: [sdg] No Caching mode page present [26424.668491] sd 12:0:0:0: [sdg] Assuming drive cache: write through [26424.668494] sd 12:0:0:0: [sdg] Attached SCSI removable disk [26457.306398] usb 4-2: USB disconnect, device number 3 [28830.968095] usb 4-2: new high-speed USB device number 4 using ehci_hcd [28831.171645] usb 4-2: New USB device found, idVendor=058f, idProduct=6387 [28831.171656] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [28831.171664] usb 4-2: Product: Mass Storage [28831.171669] usb 4-2: Manufacturer: Generic [28831.171674] usb 4-2: SerialNumber:
Bug#680278: Additional information
Dear Debian, To further troubleshoot, I downloaded and built kernel 3.4.4 generic from Kernel.org, built the .deb package as per Building the kernel the Debian way, and automount works perfectly when running 3.4.4. I may have forgotten to mention that even CDs fail to mount while running the Debian 3.2.0.3 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#613727: wicd and networkmanager conflict
Package: wicd Severity: wishlist Wicd and NetworkManager conflict when installed at the same time. The Wicd and NetworkManager programs should not be able to be installed at the same time, but they can be. Please add networkmanager conflicts with wicd and the reverse into the Debian packaging to avoid this problem. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.37-random0.1 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#613727: wicd and networkmanager conflict
On Wednesday 16 February 2011, David Paleino was heard to say: No. They can manage different interfaces :) Oh. Well, they conflict for me. Just having NetworkManager installed and trying to use wicd causes the network interfaces to not function at all. They report up but nothing more. Please see http://bugs.debian.org/548978 . Thank you, I will. Sorry to bother you. Curt- -- Those who torment us for our own good will torment us without end, for they do so with the approval of their consciences. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#567576: traceback
Package: bittornado Version: 0.3.18-10 Severity: normal Up to date Sid, just got this same error myself: $ btlaunchmanycurses --max_download_rate 100 --max_upload_rate 30 --minport 1 --maxport 10020 . /usr/lib/pymodules/python2.6/BitTornado/__init__.py:8: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha EXCEPTION: Traceback (most recent call last): File /usr/lib/pymodules/python2.6/BitTornado/RawServer.py, line 144, in listen_forever self.sockethandler.handle_events(events) File /usr/lib/pymodules/python2.6/BitTornado/SocketHandler.py, line 319, in handle_events s.handler.data_came_in(s, data) File /usr/lib/pymodules/python2.6/BitTornado/BT1/Encrypter.py, line 394, in data_came_in self.read(s) File /usr/lib/pymodules/python2.6/BitTornado/BTcrypto.py, line 92, in read self._read(self.decrypt(s)) File /usr/lib/pymodules/python2.6/BitTornado/BT1/Encrypter.py, line 479, in _read2 x = self.next_func(m) File /usr/lib/pymodules/python2.6/BitTornado/BT1/Encrypter.py, line 360, in read_message self.connecter.got_message(self, s) File /usr/lib/pymodules/python2.6/BitTornado/BT1/Connecter.py, line 256, in got_message c.download.got_unchoke() File /usr/lib/pymodules/python2.6/BitTornado/BT1/Downloader.py, line 127, in got_unchoke self._request_more(new_unchoke = True) File /usr/lib/pymodules/python2.6/BitTornado/BT1/Downloader.py, line 237, in _request_more self.downloader.start_endgame() File /usr/lib/pymodules/python2.6/BitTornado/BT1/Downloader.py, line 567, in start_endgame assert not self.endgamemode AssertionError -- System Information: Debian Release: 6.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.36.2-corwin0.1 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages bittornado depends on: ii python 2.6.6-3+squeeze5 interactive high-level object-orie ii python-support 1.0.11 automated rebuilding support for P Versions of packages bittornado recommends: ii mime-support 3.51-1 MIME files 'mime.types' 'mailcap ii python-crypto 2.1.0-2cryptographic algorithms and proto Versions of packages bittornado suggests: ii bittornado-gui0.3.18-10 bittorrent client with GUI interfa pn python-psyco none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#583254: apt: Should pull multiple DEB files from multiple repositories if available
Package: apt Version: 0.7.25.3 Severity: wishlist I have a broadband 'Net connection, and apt could utilize this by pulling multiple DEB files in parallel when those files are available from multiple repository mirrors in sources.list. I looked through the bug reports for apt and saw several bandwidth LIMITING requests, this is the opposite. When INDIVIDUAL DEB files are available, such as from volitile, Virtualbox, debian-multimedia or backports, those DEB files are pulled by apt in parallel while also pulling DEB files from the standard repositories. So at the start of a serious update/upgrade/install, I see full network utilization until the unique repositories are finished. But when there is more than one repository in sources.list that contains the same DEB files, only the first listed source is utilized so only a single DEB file is being downloaded, one at a time, even if hundreds of mirrored standard packages are being updated. I have more than one official Debian mirrors in my sources.list, thank you apt-spy, and if different DEB files were pulled from each of them in parallel, this would better utilize my 'Net connection, as well as spreading the load across different mirrors. Thank you for listening, Curt- -- Package-specific info: -- apt-config dump -- APT ; APT::Architecture i386; APT::Build-Essential ; APT::Build-Essential:: build-essential; APT::Install-Recommends 1; APT::Install-Suggests 0; APT::Acquire ; APT::Acquire::Translation environment; APT::Authentication ; APT::Authentication::TrustCDROM true; APT::NeverAutoRemove ; APT::NeverAutoRemove:: ^linux-image.*; APT::NeverAutoRemove:: ^linux-restricted-modules.*; APT::NeverAutoRemove:: ^kfreebsd-image.*; Dir /; Dir::State var/lib/apt/; Dir::State::lists lists/; Dir::State::cdroms cdroms.list; Dir::State::userstatus status.user; Dir::State::status /var/lib/dpkg/status; Dir::Cache var/cache/apt/; Dir::Cache::archives archives/; Dir::Cache::srcpkgcache srcpkgcache.bin; Dir::Cache::pkgcache pkgcache.bin; Dir::Etc etc/apt/; Dir::Etc::sourcelist sources.list; Dir::Etc::sourceparts sources.list.d; Dir::Etc::vendorlist vendors.list; Dir::Etc::vendorparts vendors.list.d; Dir::Etc::main apt.conf; Dir::Etc::netrc auth.conf; Dir::Etc::parts apt.conf.d; Dir::Etc::preferences preferences; Dir::Etc::preferencesparts preferences.d; Dir::Bin ; Dir::Bin::methods /usr/lib/apt/methods; Dir::Bin::dpkg /usr/bin/dpkg; Dir::Media ; Dir::Media::MountPath /media/apt; Dir::Log var/log/apt; Dir::Log::Terminal term.log; DPkg ; DPkg::Pre-Install-Pkgs ; DPkg::Pre-Install-Pkgs:: /usr/bin/apt-listchanges --apt || test $? -ne 10; DPkg::Pre-Install-Pkgs:: /usr/sbin/dpkg-preconfigure --apt || true; DPkg::Tools ; DPkg::Tools::Options ; DPkg::Tools::Options::/usr/bin/apt-listchanges ; DPkg::Tools::Options::/usr/bin/apt-listchanges::Version 2; -- (no /etc/apt/preferences present) -- -- /etc/apt/sources.list -- # See sources.list(5) for more information, especialy # Remember that you can only use http, ftp or file URIs # CDROMs are managed through the apt-cdrom tool. #deb http://http.us.debian.org/debian stable main contrib non-free #deb http://non-us.debian.org/debian-non-US stable/non-US main contrib non-free deb http://security.debian.org squeeze/updates main contrib non-free # New for Lenny! #deb http://volatile.debian.org/debian-volatile squeeze/volatile main contrib non-free # deb-src http://volatile.debian.org/debian-volatile lenny/volatile main contrib non-free # Uncomment if you want the apt-get source function to work #deb-src http://http.us.debian.org/debian stable main contrib non-free #deb-src http://non-us.debian.org/debian-non-US stable non-US deb ftp://debian.mirror.iweb.ca/debian/ squeeze main contrib non-free deb http://debian.yorku.ca/debian/ squeeze main contrib non-free deb http://mirror.peer1.net/debian/ squeeze main contrib non-free #deb http://http.us.debian.org/debian/ squeeze main non-free contrib #Unofficial Mplayer deb http://www.debian-multimedia.org squeeze main non-free #Backports for WICD and etc #deb http://www.backports.org/debian lenny-backports main contrib non-free #VirtualBox deb http://download.virtualbox.org/virtualbox/debian lenny non-free -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages apt depends on: ii debian-archive-keyring2009.01.31 GnuPG archive keys of the Debian a ii libc6 2.10.2-9 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.4-1 GCC support library ii libstdc++64.4.4-1The GNU Standard C++ Library v3 apt recommends no packages. Versions of packages apt suggests: pn apt-doc none (no description available) ii aptitude
Bug#580290: xfce: No Debian application menu
Package: xfce4 Version: 4.6.1.3 Severity: important File: xfce Tags: squeeze The xfce menu does not include any entry for the all-inclusive Debian application menu. This seems new to Squeeze, since Lenny has such an entry. This severely impacts the usability of xfce, since there are lots of applications installed that don't show up in the xfce-specific menus. I saw the wishlist bug #489441, but this is not a complete change to the menu structure. Only an inclusion of what has made Debian one of the best distributions of all: Desktop agnosticism. Curt- -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xfce4 depends on: ii gtk2-engines-xfce 2.6.0-2A GTK+-2.0 theme engine for Xfce ii orage 4.6.1-1Calendar for Xfce Desktop Environm ii thunar1.0.1-3File Manager for Xfce ii thunar-volman 0.3.80-4 Thunar extension for volumes manag ii xfce4-appfinder 4.6.1-1Application finder for the Xfce4 D ii xfce4-mixer 4.6.1-2Xfce mixer application ii xfce4-panel 4.6.3-1The Xfce4 desktop environment pane ii xfce4-session 4.6.1-1Xfce4 Session Manager ii xfce4-settings4.6.4-2graphical application for managing ii xfce4-utils 4.6.1-2Various tools for Xfce ii xfconf4.6.1-2utilities for managing settings in ii xfdesktop44.6.1-1xfce desktop background, icons and ii xfwm4 4.6.1-1window manager of the Xfce project Versions of packages xfce4 recommends: ii desktop-base 5.0.5 common files for the Debian Deskto ii tango-icon-theme 0.8.90-3 Tango icon theme ii xorg 1:7.5+5X.Org X Window System Versions of packages xfce4 suggests: ii xfprint4 4.6.1-1Printer GUI for Xfce4 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#543529: fglrx: Fails to build on 2.6.26 or 2.6.30-bpo
Package: fglrx-source Version: 1:8-12-4 Severity: important File: fglrx Justification: fails to build from source When using module assistant, the fglrx-source package fails to build, with conflicting types for irqreturn_t, at least that is what it looks like. I can't find the m-a log file location to paste it into this message. The pre-built 2.6.26 module, which I assume was made with m-a, works fine. Thing is, I'd like to try the 2.6.30 kernel. -- System Information: Debian Release: 5.0.2 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (x86_64) Kernel: Linux 2.6.30-bpo.1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages fglrx-source depends on: ii bzip2 1.0.5-1high-quality block-sorting file co ii debhelper 7.0.15 helper programs for debian/rules ii make 3.81-5 The GNU version of the make util Versions of packages fglrx-source recommends: ii kernel-package11.015 A utility for building Linux kerne ii module-assistant 0.10.11.0 tool to make module package creati Versions of packages fglrx-source suggests: ii fglrx-driver 1:8-12-4 non-free AMD/ATI r5xx, r6xx, r7xx -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#543529: fglrx: Fails to build on 2.6.26 or 2.6.30-bpo
First, I'm sorry. It wasn't 2.6.26, it was 2.6.30-686 and 2.6.30-amd64. I have the two build log files here, which I will attach. Curt- -- The Magistrate, enrobed in taxes, condemns the thief in stolen rags. /usr/bin/make -f debian/rules clean make[1]: Entering directory `/usr/src/modules/fglrx' dh_testroot rm -f configure-stamp rm -f fglrx.ko fglrx.mod.c *.o libfglrx_ip.a rm -f .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd rm -rf .tmp_versions rm -rf patch dh_clean make[1]: Leaving directory `/usr/src/modules/fglrx' /usr/bin/make -f debian/rules binary_modules make[1]: Entering directory `/usr/src/modules/fglrx' if [ -f /usr/src/modules/fglrx/debian/control.template ]; then \ cat /usr/src/modules/fglrx/debian/control.template /usr/src/modules/fglrx/debian/control; \ fi dh_testdir touch configure-stamp dh_testdir /usr/bin/make -C /lib/modules/2.6.30-bpo.1-686/build SUBDIRS=/usr/src/modules/fglrx modules make[2]: Entering directory `/usr/src/linux-headers-2.6.30-bpo.1-686' CC [M] /usr/src/modules/fglrx/firegl_public.o In file included from /usr/src/modules/fglrx/drmP.h:86, from /usr/src/modules/fglrx/drm_proc.h:41, from /usr/src/modules/fglrx/firegl_public.c:429: /usr/src/modules/fglrx/drm_os_linux.h:45: error: conflicting types for ‘irqreturn_t’ /usr/src/linux-headers-2.6.30-bpo.1-common/include/linux/irqreturn.h:16: error: previous declaration of ‘irqreturn_t’ was here In file included from /usr/src/modules/fglrx/firegl_public.c:429: /usr/src/modules/fglrx/drm_proc.h: In function ‘FGLDRM__vma_info’: /usr/src/modules/fglrx/drm_proc.h:497: warning: format ‘%08lx’ expects type ‘long unsigned int’, but argument 5 has type ‘phys_addr_t’ /usr/src/modules/fglrx/firegl_public.c: In function ‘KCL_GetEffectiveUid’: /usr/src/modules/fglrx/firegl_public.c:1453: error: ‘struct task_struct’ has no member named ‘euid’ /usr/src/modules/fglrx/firegl_public.c: In function ‘KCL_PosixSecurityCapSetIPCLock’: /usr/src/modules/fglrx/firegl_public.c:1808: error: ‘struct task_struct’ has no member named ‘cap_effective’ /usr/src/modules/fglrx/firegl_public.c:1812: error: ‘struct task_struct’ has no member named ‘cap_effective’ /usr/src/modules/fglrx/firegl_public.c: In function ‘KCL_InstallInterruptHandler’: /usr/src/modules/fglrx/firegl_public.c:2659: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type /usr/src/modules/fglrx/firegl_public.c: In function ‘KCL_MEM_VM_GetRegionPhysAddrStr’: /usr/src/modules/fglrx/firegl_public.c:3223: warning: return makes pointer from integer without a cast /usr/src/modules/fglrx/firegl_public.c:3224: warning: return makes pointer from integer without a cast /usr/src/modules/fglrx/firegl_public.c:3225: warning: return makes pointer from integer without a cast /usr/src/modules/fglrx/firegl_public.c:3227: warning: return makes pointer from integer without a cast /usr/src/modules/fglrx/firegl_public.c: In function ‘KAS_Ih_Execute’: /usr/src/modules/fglrx/firegl_public.c:4202: warning: ‘return’ with no value, in function returning non-void make[5]: *** [/usr/src/modules/fglrx/firegl_public.o] Error 1 make[4]: *** [_module_/usr/src/modules/fglrx] Error 2 make[3]: *** [sub-make] Error 2 make[2]: *** [all] Error 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.30-bpo.1-686' make[1]: *** [build] Error 2 make[1]: Leaving directory `/usr/src/modules/fglrx' make: *** [kdist_image] Error 2 /usr/bin/make -f debian/rules clean make[1]: Entering directory `/usr/src/modules/fglrx' dh_testroot rm -f configure-stamp rm -f fglrx.ko fglrx.mod.c *.o libfglrx_ip.a rm -f .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd rm -rf .tmp_versions rm -rf patch dh_clean rm -f /usr/src/modules/fglrx/debian/control rm -f /usr/src/modules/fglrx/debian/dirs make[1]: Leaving directory `/usr/src/modules/fglrx' /usr/bin/make -f debian/rules binary_modules make[1]: Entering directory `/usr/src/modules/fglrx' if [ -f /usr/src/modules/fglrx/debian/control.template ]; then \ cat /usr/src/modules/fglrx/debian/control.template /usr/src/modules/fglrx/debian/control; \ fi dh_testdir touch configure-stamp dh_testdir /usr/bin/make -C /lib/modules/2.6.30-bpo.1-amd64/build SUBDIRS=/usr/src/modules/fglrx modules make[2]: Entering directory `/usr/src/linux-headers-2.6.30-bpo.1-amd64' CC [M] /usr/src/modules/fglrx/firegl_public.o In file included from /usr/src/modules/fglrx/drmP.h:86, from /usr/src/modules/fglrx/drm_proc.h:41, from /usr/src/modules/fglrx/firegl_public.c:429: /usr/src/modules/fglrx/drm_os_linux.h:45: error: conflicting types for ‘irqreturn_t’ /usr/src/linux-headers-2.6.30-bpo.1-common/include/linux/irqreturn.h:16: error: previous declaration of ‘irqreturn_t’ was here In file included from /usr/src/modules/fglrx/firegl_public.c:429: /usr/src/modules/fglrx/drm_proc.h: In function ‘FGLDRM__vma_info’: /usr/src/modules/fglrx/drm_proc.h:497: warning: format ‘%08lx’ expects type ‘long unsigned int’, but argument 5 has
Bug#543529: [Pkg-fglrx-devel] Bug#543529: fglrx: Fails to build on 2.6.26 or 2.6.30-bpo
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tuesday 25 August 2009, Patrick Matthäi was heard to say: severity #543529 wishlist thanks Got it, I understand. It fails with 2.6.26? I do not think so, sorry, so I am downgrading. No, you're right, I didn't know where to look to find the build log, so I didn't realize I'd remembered it wrong. We are unable to support 2.6.30 with fglrx 8-12, it was also like hell with 9-7.. was also... gives me some hope. Is it working in Sid, and I might be able to pull it back into Lenny? Sadly, I note that the latest has not been put into backports, maybe I should be making a polite request there... Curt- - -- The Magistrate, enrobed in taxes, condemns the thief in stolen rags. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iQEVAwUBSpQSLS9Y35yItIgBAQLhagf+MKF3WSrZFKJcbckKDpPihSGRB3nigiSH 358zlYvsj3C2zlLrwixFaEeiwsKMOz90/JppWBzAI+5wiE3tY7LYrlB0NM9yataN bfeu76NYMfxZIJUS4mRz9gDiwR9CZMlwIR0YGfIGqQVHabT8CxEGDWg+snKYi+Nn CB6ZDlciN1xqwO5x/kQhZY7TRWCcBXKUDQoNqjHutrzBaAL/yxL5u3T7b64YfihE Et4npvnnY6uBfDsX8B3JH/Au/ryr+i02/j7IfX0TnJiIBYUIDfFFjct9KvdSBkqb vyvK1YlIhZWoXAiMHEeGbPyBHJF+9URy7JweKmRmqB+K6f/tFS8ZeQ== =7feT -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#480883: dpkg-reconfigure xserver-xorg stops after keyboard definitions
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 23 June 2008, Brice Goglin was heard to say: There's already bug #483821 about the nvidia driver having to ship a nvidia.ids file so that the server can autoload the driver when it sees the nvidia board. Got it, thanks. Simply adding driver nvidia to the device section did the trick, everything else took care of itself as you described. The inexorable march of progress! Curt- - -- Treason! http://blog.mises.org/archives/007926.asp -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iQEVAwUBSF+bsC9Y35yItIgBAQL5EQf+KP6XrT+R3lheNnVmN6VOb3HOXlAnLi5X /Mw3VeKK9ffhNeIGKQY52snfCiLR5uNAtNVLu1xzpkbRwvVtf0GcLzSCIMjCXYEU b7X+fi5yVNxlpb3gBI4Fun2BN7HTP13ll0qT0oBrd1mgm+T7CpdwAitobrXNWa0d ZKheAbsCbFuaX5yODrUN8iQ+L78pr8IgFYT+rXqk2KNULoa3DR43nALAnv+/uwTG OayNFK+FG50HB4fnyOplQWaZSCl1C+x6T4T7OVUbnByvib64gN+pobh0QjN/ookG lslSY/LX9ZroKy7j4uwsmLqVDa8cKh1JsDYYqCQiEBp9gSh3efNrvA== =x2i/ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486913: /usr/bin/ooffice: Will not open anything, User interface language cannot be determined.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 18 June 2008 it was so written: Also it can be that simply (because of fs errors etc) your fs (and therefore OOos files) became corrupted... Ran fsck (thank you, Knoppix) as detailed as I could last night, no problems. If there is a corrupted file, I don't know what it may be. Did you change any /usr/lib/openoffice/program/*rc file? No, I don't mess with that stuff. I'm a user type, rather than developer. (Well, apt-get remove openoffice.org-*, apt-get instal openoffice.org openoffice.org-.. , or with --reinstall of all OOo packages, but that won't help if files in /etc/openoffice gets broken) Consider it done, as soon as I get time today, and let you (and bugtrack) know the result. Curt- - -- Treason! http://blog.mises.org/archives/007926.asp -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iQEVAwUBSFpGpi9Y35yItIgBAQIFRgf/SzhMQYuwUGdXhNqpKncNzBKpsCgNTd03 /b4Gd0lFPvzH+mKd845vIc7MvltIgGUPAl9Vw1uIJXn75Urs3SrAjGlpG3sYB6Xg asrFKClKwV5Dm96Y37l/v69MegfAQiOLWR0tW+x2oyD07awhcEzaFKAudGRasXPj rIJmJJF83Qe/6/KIZ1+x84pFlOJ7Y1mIW8C+5fdbsglgbWu8GBMVrRPiE34ovGiH sJbiW8yOI8JeOYpAI2FMhtpEQPGcE1BGaQd086Oalbsyo8P6zFt4VdjHXY5p8KQV xPJA64qEd/uk9PxmeTCDDlxrvtw0fkWtrdEMQiRR+VESHz9SegbdDw== =/Tnh -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486913: /usr/bin/ooffice: Will not open anything, User interface language cannot be determined.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 18 June 2008 it was so written: Exactly that :) (Well, apt-get remove openoffice.org-*, apt-get instal openoffice.org openoffice.org-.. , or with --reinstall of all OOo packages, but that won't help if files in /etc/openoffice gets broken)) Ok, it worked. However, I got an error when uninstalling, and then when installing, and I thought you might like to see them: = Removing openoffice.org-writer2latex ... ERROR: Cannot determine language! unopkg failed. ERROR: Cannot determine language! unopkg failed. Removing extension ... ERROR: Cannot determine language! unopkg failed. done. == and then, == Setting up openoffice.org-writer2latex (0.5-6) ... Adding extension /usr/lib/openoffice/share/extension/install/writer2latex.uno.pkg... unopkg failed. done. == Not sure what uno is, I certainly haven't used it that I know of. Thank you very much for all your help. Sorry to bother you with such a trivial problem. Curt- - -- Treason! http://blog.mises.org/archives/007926.asp -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iQEVAwUBSFpyfi9Y35yItIgBAQJAvAf7B1GBbYxz4iL0JkADCx2ZiUv8hKbacU1o vbpR9jSwlEotjSut8mihQcVC594OmLGet6xCPVRxSMuU3oe0EtrA1HIWwruwr6No iD3+0laRQIOm+LjIgKT0PVQrHswuy2ck3gTbEjkh5aQ9ZzVwWQW4/Liwg/wl/yR0 mSya8DtuNNqKUCxR7jbNGMKXM4Rm6qcsQ4e4DKV7QtKyB8jKvHB3T9P1M4SEmQfi EnRHGA2+7FtnnhaHkIHjLqXNHOyFFogkSljxis6pYa1eObtPyFD9bw8hahnW1xzZ gftyXM6m3SYxFvdXUahdsn7wIZ/ZyUrsIu1KyFKuqKY66y8iB+giyw== =7kK/ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486913: /usr/bin/ooffice: Will not open anything, User interface language cannot be determined.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 19 June 2008 it was so written: Hi, Curt Howland wrote: Ok, it worked. However, I got an error when uninstalling, and the So your OOo works now again and this bug can be closed? :) Yes, please. I'll try the fix suggested for the unopkg error, but OOo is working fine now. Thanks again, Curt- - -- Treason! http://blog.mises.org/archives/007926.asp -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iQEVAwUBSFqohy9Y35yItIgBAQJVBQf/bEzfrhPN5Ite9Pq+0B6gusQajpLda+Va mNInmGy2oM4PVXdj3FluMUIFK00g0hubAa2COztgam1OoMKLbx3cHdWuVhkAX/WD oCQWVH24oMeMOZepzdMKz4bWzXIXN3iMbQF2zqqVRoHQroxpbTsq1qzPXNcOwj4S s9UeT2DljtCO61YlRFjTbUPaXIJumUIxk05w+jbw87hCWF75S+DrrQFY1cNCdi+U lFZKKofl+6raZMuTwgSX4CNSZfT04ILGajZmJ2xxbqqlOwoM9O8BBwInmzAcESOR imVOvg8GMW3hxKcBGUMSdkY/09khOIRxUd5y+Q4XUtR9AJgLK5DTzg== =sj7h -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486913: /usr/bin/ooffice: Will not open anything, User interface language cannot be determined.
Package: openoffice.org-common Version: 1:2.4.1-3 Severity: important File: /usr/bin/ooffice Up to date Sid. Just ran Dselect to make sure there was no further updates today. When trying to open any document, spreadsheet or presentation, or start oowriter, oocalc, etc, from the command line, the splash graphic for OOo 2.4 comes up, but the progress bar does not get anywhere. An error dialog comes up with: The application cannot be started. The user interface language cannot be determined. OK Pressing OK merely closes the application. My environment has LANG=en_US.UTF-8 which as far as I know has been there for a long time, and OOo worked a few days ago. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages openoffice.org-common depends on: ii dictionaries-common [openoffi 0.98.9 Common utilities for spelling dict ii openoffice.org-style-andromed 1:2.4.1-3 Default symbol style for OpenOffic Versions of packages openoffice.org-common recommends: ii openoffice.org-style-crystal 1:2.4.1-3 Crystal symbol style for OpenOffic ii openoffice.org-style-tango1:2.4.1-3 Tango symbol style for OpenOffice. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486913: /usr/bin/ooffice: Will not open anything, User interface language cannot be determined.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 18 June 2008 it was so written: tag 486913 + moreinfo tag 486913 + unreproducible thanks Hi, Thanks for the questions. The fact that it is happening to no one else is more than I got asking in Debian-user. Works here. The message you get comes when there are resource files etc. missing. Which packages of OOo do you have installed? As far as I know, all of them. Except for the KDE prelaunch loader, I don't mind load times but my laptop has max RAM at 512M. $ dpkg -l | grep -i openoffice ii openclipart-openoffice.org 0.18+dfsg-5 clip art for OpenOffice.org gallery ii openoffice.org 1:2.4.1-3 OpenOffice.org Office suite ii openoffice.org-base 1:2.4.1-3 OpenOffice.org office suite - database ii openoffice.org-base-core1:2.4.1-3 OpenOffice.org office suite -- libdba ii openoffice.org-calc 1:2.4.1-3 OpenOffice.org office suite - spreadsheet ii openoffice.org-common 1:2.4.1-3 OpenOffice.org office suite architecture ind ii openoffice.org-core 1:2.4.1-3 OpenOffice.org office suite architecture dep ii openoffice.org-draw 1:2.4.1-3 OpenOffice.org office suite - drawing ii openoffice.org-filter-binfilter 1:2.4.1-3 Legacy filters (e.g. StarOffice 5.2) for Ope ii openoffice.org-filter-mobiledev 1:2.4.1-3 Mobile Devices Filters for OpenOffice.org ii openoffice.org-help-en-us 1:2.4.1-3 English_american help for OpenOffice.org ii openoffice.org-impress 1:2.4.1-3 OpenOffice.org office suite - presentation ii openoffice.org-java-common 1:2.4.1-3 OpenOffice.org office suite Java support arc ii openoffice.org-kde 1:2.4.1-3 KDE Integration for OpenOffice.org (Widgets, ii openoffice.org-math 1:2.4.1-3 OpenOffice.org office suite - equation edito ii openoffice.org-officebean 1:2.4.1-3 OpenOffice.org Office Bean ii openoffice.org-ogltrans 1:2.4.1-3 OpenOffice.org OpenGL rendered transitions ii openoffice.org-style-andromeda 1:2.4.1-3 Default symbol style for OpenOffice.org ii openoffice.org-style-crystal1:2.4.1-3 Crystal symbol style for OpenOffice.org ii openoffice.org-style-hicontrast 1:2.4.1-3 Hicontrast symbol style for OpenOffice.org ii openoffice.org-style-industrial 1:2.4.1-3 Industrial symbol style for OpenOffice.org ii openoffice.org-style-tango 1:2.4.1-3 Tango symbol style for OpenOffice.org ii openoffice.org-writer 1:2.4.1-3 OpenOffice.org office suite - word processor ii openoffice.org-writer2latex 0.5-6 Writer/Calc to LaTeX/XHTML converter extensi ii python-uno 1:2.4.1-3 Python interface for OpenOffice.org You you have *en-US*.res in /usr/lib/openoffice/program/resource? Does this answer your question? $ ls /usr/lib/openoffice/program/resource/ abp680en-US.res chartcontroller680en-US.res eps680en-US.res rptui680en-US.res svx680en-US.res acc680en-US.res cnr680en-US.res ept680en-US.res san680en-US.res sw680en-US.res analysis680en-US.res date680en-US.res eur680en-US.res sb680en-US.rest602filter680en-US.res avmedia680en-US.res dba680en-US.res fps_office680en-US.res sc680en-US.res textconversiondlgs680en-US.res basctl680en-US.resdbp680en-US.res frm680en-US.res scsolver680en-US.res tfu680en-US.res bf_frm680en-US.resdbu680en-US.res fwe680en-US.res sd680en-US.restk680en-US.res bf_ofa680en-US.resdbw680en-US.res gal680en-US.res sdbcl680en-US.res tpl680en-US.res
Bug#480883: Additional Information
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Just in case it wasn't obvious, I reverted the xorg.conf to a previous working version before filing the bug. Curt- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: http://getfiregpg.org iQEVAwUBSDLWPi9Y35yItIgBAQIKTgf/VVxglHWPWOxIhUslBI4J+44QnZIT/bno OtxsT/UeXhDeJUZpLryzVjd1/SELvbKCHwNKSQX35otUV35AJcFI78aperry5pFV PHVmogX01MQgla99vSF3ToSEU3jbJwYEbDs8mudmJtcPNo90HNA0zYZe6oeMMoJr WhTqnWmp88uNsMhbpuONwsOdZeSdIWwSsm6zUdXzNZICEDWa2ZK6QKZY5XFZYexy tHCuBbS3u5f1VAXezbDHcKeD8No7jxbkU8wGhfX+IoTfX4ZtcN/mYycOY5Qw/Q6V SM1gm+EKINL1qOfo59XbSRirMxCc8AGNnHwDpVxZf8ImUmxlHnSDeQ== =2Ncg -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#480883: dpkg-reconfigure xserver-xorg stops after keyboard definitions
Package: xserver-xorg Version: 1:7.3+10 Severity: normal When I try dpkg-reconfigure xserver-xorg the configuration for various keyboard options is executed, then the reconfiguration stops. The monitor, mouse and video card are never considered, and those areas in the /etc/X11/xorg.conf are left empty. -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 2007-12-13 09:30 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1676828 2008-05-09 06:05 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: nVidia Corporation NV31M [GeForce FX Go5600] (rev a1) /etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 2013 2008-05-12 10:31 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type man xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ExplorerPS/2 Option Emulate3Buttons true EndSection Section InputDevice Identifier Synaptics Touchpad Driver synaptics Option SendCoreEventstrue Option Device/dev/psaux Option Protocol auto-dev Option VertEdgeScrollfalse Option HorizEdgeScroll false EndSection Section Device Identifier nVidia Corporation NV31M [GeForce FX Go5600] # Driver nvidia Driver nv BusID PCI:1:0:0 EndSection Section Monitor Identifier Generic Monitor # Option DPMS HorizSync 30-67 VertRefresh 50-75 EndSection Section Screen Identifier Default Screen Device nVidia Corporation NV31M [GeForce FX Go5600] Monitor Generic Monitor DefaultDepth24 SubSection Display # Modes 1400x1050 1024x768 800x600 640x480 Modes 800x600 640x480 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Configured Mouse InputDevice Synaptics Touchpad EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 38159 2008-05-12 10:31 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the xorg product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.4.0.90 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.1~git20080507-1) Current Operating System: Linux dierdre 2.6.25-1-686 #1 SMP Mon Apr 28 13:54:58 UTC 2008 i686 Build Date: 09 May 2008 11:51:59AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon May 12 10:31:28 2008 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device nVidia Corporation NV31M
Bug#479173: libqt4-qt3support: apt fails missing new-line
Package: libqt4-qt3support Version: 4.4.0~rc1-5 Severity: important Every time I try to do anyting with apt, the following error occurs: = Extracting templates from packages: 100% Preconfiguring packages ... (Reading database ... dpkg: error processing /var/cache/apt/archives/libgnutls26_2.2.3~rc-1_i386.deb (--unpack): files list file for package `libqt4-qt3support' is missing final newline Errors were encountered while processing: /var/cache/apt/archives/libgnutls26_2.2.3~rc-1_i386.deb Processing was halted because there were too many errors. E: Sub-process /usr/bin/dpkg returned an error code (1) -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libqt4-qt3support depends on: ii libc62.7-10 GNU C Library: Shared libraries ii libgcc1 1:4.3.0-3 GCC support library ii libqt4-designer 4.4.0~rc1-5 Qt 4 designer module ii libqt4-gui 4.4.0~rc1-5 Qt 4 GUI module ii libqt4-network 4.4.0~rc1-5 Qt 4 network module ii libqt4-sql 4.4.0~rc1-5 Qt 4 SQL module ii libqt4-xml 4.4.0~rc1-5 Qt 4 XML module ii libqtcore4 4.4.0~rc1-5 Qt 4 core module ii libstdc++6 4.3.0-3 The GNU Standard C++ Library v3 libqt4-qt3support recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#479173: Solved, please close. Corrupted /var/lib/dpkg/info/libqt4-qt3support.list
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The file /var/lib/dpkg/info/libqt4-qt3support.list had become corrupted. Now I know yet another place to look for problems. :^) I put in a good copy, and everything is working now. Please close the ticket. Curt- - -- Treason! http://blog.mises.org/archives/007926.asp -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSByhPy9Y35yItIgBAQKGmAf/biXYj5aAssGhoT9Kak/qturSAYjLbkmw 6hfVmxzhrtekB2t63I8dMiRYOazmkJoaWpaAlRCchSQaeLBvaavsGft2JYxfNwMW YjeRzIYAny6yfrpuv5lQDSQKnMuIfsapNEo41gHMwGOoqwbyBaSTxDg0Ygay/t67 AtbgLSDtRrSCkxY55CpL2qmK24R8XBq6TUlfxJbUUuA1cU752cvr0Bm7jCvhxBUL cLui2i/9yV6SpqznYyq+pUIQA+mttCVbzyCEOplYp9nJzA9hWfHlp1q3dr2I2DdO 0we0OGsGKIx5pXyHH/sy4Cjah6WUp0NfKk/43sij0BGrgaWHP7UhYA== =ffx8 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#440498: nvidia-kernel-source: update-modules command is depreciated
Package: nvidia-kernel-source Version: 100.14.11-1 Severity: wishlist The following error message comes up when installing latest nvidia driver in Sid. I've also seen the same message for some time: Unpacking nvidia-kernel-2.6.22-2-686 (from .../nvidia-kernel-2.6.22-2-686_100.14.11-1+2.6.22-4_i386.deb) ... Setting up nvidia-kernel-2.6.22-2-686 (100.14.11-1+2.6.22-4) ... * * The update-modules command is deprecated and should not be used! * -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages nvidia-kernel-source depends on: ii debhelper 5.0.53 helper programs for debian/rules ii dpatch2.0.27 patch maintenance system for Debia ii make 3.81-3 The GNU version of the make util ii sed 4.1.5-3The GNU sed stream editor Versions of packages nvidia-kernel-source recommends: ii devscripts 2.10.7 Scripts to make the life of a Debi ii kernel-package 11.001 A utility for building Linux kerne ii nvidia-glx 100.14.11-1 NVIDIA binary Xorg driver -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#436267: linux-image-2.6.22-1-686: IEEE1394 modules unbuilt in packaged kernel
Package: linux-image-2.6.22-1-686 Version: 2.6.22-3 Severity: wishlist The IEEE1394 kernel drivers that have been built as modiles in prior kernels have not been built with the kernel in the linux-image-2.6.22-1-686 package. Having these modules available without compiling a custom kernel has been very useful in the past, would it be possible to enable the IEEE1394 as loadable modules again please? Here is the entire firewire section from /boot/config-2.6.22-1-686 # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m # CONFIG_IEEE1394 is not set -- Package-specific info: ** Version: Linux version 2.6.22-1-686 (Debian 2.6.22-3) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 14:37:42 UTC 2007 ** Tainted: PFSRMB ** Kernel log: cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. MC'97 1 converters and GPIO not ready (0xff00) drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed drivers/hid/usbhid/hid-core.c: timeout initializing reports input: Logitech Logitech Attack 3 as /class/input/input4 input: USB HID v1.10 Joystick [Logitech Logitech Attack 3] on usb-:00:03.0-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k EXT3 FS on hda1, internal journal sonypi: Sony Programmable I/O Controller Driver v1.26. sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0x, useinput = on, acpi = on sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 sonypi: device allocated minor is 63 input: Sony Vaio Jogdial as /class/input/input5 input: Sony Vaio Keys as /class/input/input6 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. NET: Registered protocol family 10 lo: Disabled Privacy Extensions hda: selected mode 0x45 hdc: selected mode 0x42 ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) ACPI: AC Adapter [ACAD] (on-line) input: Lid Switch as /class/input/input7 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input8 ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver ath0: no IPv6 routers present powernow: This module only works with AMD K7 CPUs ACPI: PCI Interrupt :01:00.0[A] - GSI 16 (level, low) - IRQ 23 NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007 agpgart: Found an AGP 3.0 compliant device at :00:00.0. agpgart: Putting AGP V3 device at :00:00.0 into 8x mode agpgart: SiS delay workaround: giving bridge time to recover. agpgart: Putting AGP V3 device at :01:00.0 into 8x mode sd 0:0:0:1: [sdb] 2001888 512-byte hardware sectors (1025 MB) sd 0:0:0:1: [sdb] Write Protect is off sd 0:0:0:1: [sdb] Mode Sense: 00 00 00 00 sd 0:0:0:1: [sdb] Assuming drive cache: write through sd 0:0:0:1: [sdb] 2001888 512-byte hardware sectors (1025 MB) sd 0:0:0:1: [sdb] Write Protect is off sd 0:0:0:1: [sdb] Mode Sense: 00 00 00 00 sd 0:0:0:1: [sdb] Assuming drive cache: write through sdb: sdb1 usb 4-1: USB disconnect, address 2 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: created new fw device fw1 (0 config rom retries) firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: created new fw device fw1 (0 config rom retries) usb 2-2: new full speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2911 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb-storage: device scan complete scsi 2:0:0:0: Direct-Access HP psc 2210 1.00 PQ: 0 ANSI: 2 sd 2:0:0:0: [sda] Attached SCSI removable disk drivers/usb/class/usblp.c: usblp0: removed usb 2-2: USB disconnect, address 2 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: created new fw device fw1 (0 config rom retries) firewire_core: phy config: card 0, new root=ffc1,
Bug#436267: linux-image-2.6.22-1-686: IEEE1394 modules unbuilt in packaged kernel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 06 August 2007, maximilian attems was heard to say: no they are the old firwire stack, that has been disabled due to security concern and general distrust. Oh crud. :^( what are you missing in the yuyu stack? At least raw1394, to create an entry /dev/raw1394 so that dvgrab can access a video camera. I don't know what else might have been mixed into the stack to do the work. The camera shows up, dmesg shows the following when I plug it in: - firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: created new fw device fw1 (0 config rom retries) - But if /dev/raw1394 is gone with a good reason, such is life. You folks are the experts. Curt- - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRrdlLy9Y35yItIgBAQJa6gf+PHwMHysrCkgYxOH2Z+E1dbz9fP7e5HXH DmqER+1FJpT6KyU8BKvSeYL88b3c3F4ats6F/O5bB7F3ipOuP0l+AgVmgrMt7uyJ SponVi72S7RoeOVvJBYw5Q6caANDdQEwL2HNdiDKcoWEC0m5X6m1bX8CBq5/numv Wq4HWqgjABLzLZRBE9tzlaYV6DWrDrLj6Jm4ININPh3qHP7q13xtzzMz3n8Lb3wu QXkcRT29Kz8C8V4+tzTNfP80BM15bhbBoR9o19XyaZ73PU6Ks1ff0oPkpP1HlJAV nwDZJuVasH2dHDNqu0/t9BReio9yvQUsmoxapRQ/1Azi0sB48EdwmQ== =H7XK -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#436295: dvgrab: raw1394 no longer being compiled into Debian kernel
Package: dvgrab Version: 2.1-2 Severity: important I'm sorry if this should have been a wishlist bug, I couldn't decide. As of kernel 2.6.22, according to bug #436267 which I opened on the kernel, the reason that /dev/raw1394 doesn't exist is because the Debian kernel folks aren't building the module raw1394 any more. Which means in order to use dvgrab, people have to custom compile a kernel. Like I said, not sure if this is critical, since dvgrab doesn't work any more with the Debian kernels, or if it's wishlist because it would be nice if dvgrab used whatever it is that is being built into the kernels now. The camera shows up, this is what dmesg shows when I power it on: firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_core: created new fw device fw1 (0 config rom retries) maybe there is something there for dvgrab to use. Curt- -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-1-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages dvgrab depends on: ii libavc1394-00.5.3-1+b1 control IEEE 1394 audio/video devi ii libc6 2.6-5GNU C Library: Shared libraries ii libdv4 1.0.0-1+b1 software library for DV format dig ii libgcc1 1:4.2.1-1GCC support library ii libiec61883-0 1.1.0-2 an partial implementation of IEC 6 ii libjpeg62 6b-13The Independent JPEG Group's JPEG ii libquicktime1 2:1.0.0+debian-4 library for reading and writing Qu ii libraw1394-81.2.1-3.1library for direct access to IEEE ii libstdc++6 4.2.1-1 The GNU Standard C++ Library v3 ii zlib1g 1:1.2.3.3.dfsg-5 compression library - runtime dvgrab recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#434412: closed by Roland Mas [EMAIL PROTECTED] (Bug#434412: fixed in kino 1.0.0-2)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 26 July 2007, Debian Bug Tracking System was heard to say: This is an automatic notification regarding your Bug report #434412: kino: Broken Dependency: Libquicktime0 conflicts with libquicktime1, which was filed against the kino package. It has been closed by Roland Mas [EMAIL PROTECTED]. Many thanks for all your hard work and time. Curt- - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRqki1S9Y35yItIgBAQILnQf/TwRJt9tQgKiSlerJfaWDvuwpJb+ZuLUp T27TEn075K82ONwVG/0/jldSd+VLaJ+bmDzqwTBDmoUIx74h51/xiKAEEN+EgAi7 FWzln4oCizLqpSNKMJCPfNLKPE2IilV4Cwj1HpFF17MOZJXbOn1sc8FbkZzHnSjK 37GFhCaz40GzchQWQ0/1VA8o/oS8j4JJjFiisTZAOuKJp0s+3T8jRJQ0RzMZpf4g CwzSq4zj8mheiBqh+xu2FL5/I12Bfsfq2GoO1BkLlUbnEYKbL32tHtVMiHjViP2I tDq2hCUAXYOMURRQ7P7wpIl4yF4Hut7eQEgfMLzWPphAGHrJKRIOQQ== =tOn8 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#434597: closed by Bastian Blank [EMAIL PROTECTED] (Re: Bug#434597: Setting up linux-image-2.6.22-1-686 (2.6.22-2), mkinitrd.yaird failed to create initrd image.)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Bastian Blank [EMAIL PROTECTED] wrote: Justification: breaks the whole system No it does not. Yes, it did. Unbootable is one of the options listed in reportbug for breaks the whole system. Don't use yaird. Then why is yaird packaged? I was writing back to note that, violating the rule of updating a running kernel that it should be rebooted ASAP, I was able to uninstall yaird and use initramfs-tools instead, and it indeed did work to create the initrd.img file, as you intimate that it might by suggesting that there might be some other unnamed package to do what yaird does (or rather, until today, did). My complements to the dselect developers who give a list of alternatives when uninstalling a package, for other package(s) which provide that needed functionality. I was going to ask that the ticket 434597 be reassigned to yaird. But sadly, it has already been closed. - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRqcTNS9Y35yItIgBAQLDRQf+LzOAnXfiwcmVmxilcfw+x0jN6UTgtvYL t5maH+Yy9kWbGNBde04HWEuye0TZMeRfbF5gwKIdjUk1pYggw+CTw0dszTyPBPLk bVaYzpZod0U+0fnkGGUulVk5640BS6gsBbl4wnlHdRQyzCHcBCtFBDkk7teDETMT LxUFKayd+VydSLDJnhiG9fGl1MnXGKsQcePfx1Yzb82W6BYUofpd9uVzj5W4yOZ9 nWyRg39DA1Gq845qo18Uew14Sro5cb0ac5XPyIVW3sNqf/P2do4rrgs0WOkfoszP hM+OqfkPIcpOysi6LGu0NiV3PsGgxQkvtlYXIQhPiqYOwnAnCd7OkQ== =d8qj -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#434597: Setting up linux-image-2.6.22-1-686 (2.6.22-2), mkinitrd.yaird failed to create initrd image.
Package: linux-image-2.6.22-1-686 Version: 2.6.22-2 Severity: critical Justification: breaks the whole system When installing linux-image-2.6.22-1-686 (2.6.22-2), the following error comes up: -- Setting up linux-image-2.6.22-1-686 (2.6.22-2) ... Running depmod. Finding valid ramdisk creators. Using mkinitrd.yaird to build the ramdisk. yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal) mkinitrd.yaird failed to create initrd image. Failed to create initrd image. dpkg: error processing linux-image-2.6.22-1-686 (--configure): subprocess post-installation script returned error exit status 9 --- -- Package-specific info: ** Version: Linux version 2.6.22-1-686 (Debian 2.6.22-1) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sat Jul 21 06:44:36 UTC 2007 ** Tainted: PFSRMB ** Kernel log: hub 2-0:1.0: 2 ports detected PCI: Enabling device :00:03.2 (0010 - 0012) ACPI: PCI Interrupt :00:03.2[C] - GSI 22 (level, low) - IRQ 20 ohci_hcd :00:03.2: OHCI Host Controller ohci_hcd :00:03.2: new USB bus registered, assigned bus number 3 ohci_hcd :00:03.2: irq 20, io mem 0xd4002000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt :00:04.0[A] - GSI 19 (level, low) - IRQ 21 :00:04.0: Realtek RTL8201 PHY transceiver found at address 1. :00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 21, 08:00:46:a8:d8:d1. PCI: Enabling device :00:03.3 ( - 0002) ACPI: PCI Interrupt :00:03.3[D] - GSI 23 (level, low) - IRQ 22 ehci_hcd :00:03.3: EHCI Host Controller ehci_hcd :00:03.3: new USB bus registered, assigned bus number 4 PCI: cache line size of 128 is not supported by device :00:03.3 ehci_hcd :00:03.3: irq 22, io mem 0xd4003000 ehci_hcd :00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected cs: IO port probe 0x100-0x4ff: excluding 0x480-0x48f cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. agpgart: Detected SiS chipset - id:1608 agpgart: AGP aperture is 64M @ 0xd000 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt :00:02.6[C] - GSI 18 (level, low) - IRQ 17 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x480-0x48f cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. MC'97 1 converters and GPIO not ready (0xff00) ACPI: PCI Interrupt :00:0a.2[A] - GSI 17 (level, low) - IRQ 16 firewire_ohci: Added fw-ohci device :00:0a.2, OHCI version 1.0 ACPI: PCI Interrupt :00:02.7[C] - GSI 18 (level, low) - IRQ 17 firewire_core: created new fw device fw0 (0 config rom retries) usb 2-2: new low speed USB device using ohci_hcd and address 3 intel8x0_measure_ac97_clock: measured 55442 usecs intel8x0: clocking to 48000 usb 2-2: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using ohci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev Initializing USB Mass Storage driver... drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed drivers/hid/usbhid/hid-core.c: timeout initializing reports input: Logitech Logitech Attack 3 as /class/input/input4 input: USB HID v1.10 Joystick [Logitech Logitech Attack 3] on usb-:00:03.1-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k EXT3 FS on hda1, internal journal sonypi: Sony Programmable I/O Controller Driver v1.26. sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0x, useinput = on, acpi = on sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 sonypi: device allocated minor is 63 input: Sony Vaio Jogdial as /class/input/input5 input: Sony Vaio Keys as /class/input/input6 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. usb-storage: device scan complete scsi 0:0:0:0: Direct-Access Sony MSC-U03 2.00 PQ: 0 ANSI: 0
Bug#434409: libquicktime1 conflicts with libquicktime0, dvgrab depends upon libquicktime0
Package: dvgrab Version: 1.8-4 Severity: important Libquicktime1 is conflicting with libquicktime0, dvgrab depends upon libquictime0. Can dvgrab be set to use libquicktime1 please? Curt- -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-1-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages dvgrab depends on: ii libavc1394-0 0.5.3-1+b1 control IEEE 1394 audio/video devi ii libc62.6-2 GNU C Library: Shared libraries ii libdv4 1.0.0-1+b1 software library for DV format dig ii libgcc1 1:4.2-20070712-1GCC support library ii libjpeg626b-13 The Independent JPEG Group's JPEG ii libquicktime02:0.9.10+debian-0.3 library for reading and writing Qu ii libraw1394-8 1.2.1-3.1 library for direct access to IEEE ii libstdc++6 4.2-20070712-1 The GNU Standard C++ Library v3 dvgrab recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#434412: kino: Broken Dependency: Libquicktime0 conflicts with libquicktime1
Package: kino Version: 0.92-3+b2 Severity: important Libquicktime1 is overriding libquicktime0, kino depends upon libquicktime0. Could kino be set to use libquicktime1 please? Curt- -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-1-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages kino depends on: ii libasound2 1.0.14a-2 ALSA library ii libatk1.0-0 1.18.0-2The ATK accessibility toolkit ii libavc1394-0 0.5.3-1+b1 control IEEE 1394 audio/video devi ii libavcodec1d 0.cvs20070307-6 ffmpeg codec library ii libavformat1d0.cvs20070307-6 ffmpeg file format library ii libavutil1d 0.cvs20070307-6 ffmpeg utility library ii libc62.6-2 GNU C Library: Shared libraries ii libcairo21.4.10-1The Cairo 2D vector graphics libra ii libdv4 1.0.0-1+b1 software library for DV format dig ii libfontconfig1 2.4.2-1.2 generic font configuration library ii libgcc1 1:4.2-20070712-1GCC support library ii libglade2-0 1:2.6.1-1 library to load .glade files at ru ii libglib2.0-0 2.12.13-1 The GLib library of C routines ii libgtk2.0-0 2.10.13-1 The GTK+ graphical user interface ii libice6 1:1.0.3-2 X11 Inter-Client Exchange library ii libiec61883-01.1.0-2 an partial implementation of IEC 6 ii libogg0 1.1.3-2 Ogg Bitstream Library ii libpango1.0-01.16.4-3Layout and rendering of internatio ii libpng12-0 1.2.15~beta5-2 PNG library - runtime ii libquicktime02:0.9.10+debian-0.3 library for reading and writing Qu ii libraw1394-8 1.2.1-3.1 library for direct access to IEEE ii libsamplerate0 0.1.2-5 audio rate conversion library ii libsm6 2:1.0.3-1+b1X11 Session Management library ii libstdc++6 4.2-20070712-1 The GNU Standard C++ Library v3 ii libtheora0 0.0.0.alpha7.dfsg-2 The Theora Video Compression Codec ii libvorbis0a 1.1.2.dfsg-2The Vorbis General Audio Compressi ii libvorbisenc21.1.2.dfsg-2The Vorbis General Audio Compressi ii libx11-6 2:1.0.3-7 X11 client-side library ii libxcursor1 1:1.1.8-2 X cursor management library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxi6 2:1.1.1-1 X11 Input extension library ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library ii libxml2 2.6.29.dfsg-1 GNOME XML library ii libxrandr2 2:1.2.1-1 X11 RandR extension library ii libxrender1 1:0.9.2-1 X Rendering Extension client libra ii libxv1 1:1.0.3-1 X11 Video extension library ii zlib1g 1:1.2.3.3.dfsg-5compression library - runtime kino recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429745: nvidia-kernel-source: After nvidia splash, x crashes unable to handle kernel paging request))
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'm sorry, but now it's working. After half a dozen reboots and fiddles last night, with continual failure, this morning I forgot to reboot into 2.6.18 and let 2.6.21 boot. It came up with the Nvidia driver just fine, no errors. I hate it when software heals. Please close this ticket, and thank you very much for listening. Curt- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRnk31i9Y35yItIgBAQJXfgf9FgxjUBT5U4KiV+6sS34a5KPT9SaEDMAx 3vSju4hC5axHUZ9PKZnDUz/ksb3MEGbr7LQfAk/bY1NE7sQXR6HjUfr3s7WIQzHT p+ZNDEz2Xm4pkfTbcAZkyXEaqAJBjJUDLnCFUtvOIMJzEbiGZYBb4y1QhbBLjhpU ZdTlPiMF2hF2RKB+0nGi7XuJp1YtbRxKTVJiFvwhxWxd6QNzF6ALhZ90L06Z5PIy ZCaTf3FnDUTWmCsDMkOHOlyQ4PvXL5msTjzOSwFVFVb8hAZ8HQYW3shBmqYu2PZK S9selg/8IUGr1vzd7S5NRKa4IJjnkAxywFKMhQvjevkR1/qwKGvBNA== =o/JY -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429745: nvidia-kernel-source: After nvidia splash, x crashes unable to handle kernel paging request
Package: nvidia-kernel-source Version: 100.14.06-1 Severity: grave Justification: renders package unusable Just upgraded to Nvidia 100.14.06-1, after building with m-a a-i nvidia-kernel and then installing the latest nvidia-glx, the Nvidia spash screen beta comes up, and the following system crash is displayed: BUG: unable to handle kernel paging request at virtual address 4814 printing eip: e17e625b *pde = Oops: [#1] SMP Modules linked in: nvidia(P) binfmt_misc speedstep_lib freq_table ppdev lp thermal fan button processor ac battery ipv6 wlan_wep dm_snapshot dm_mirror dm_mod sonypi sr_mod sd_mod sbp2 ide_generic eth1394 snd_intel8x0m usb_storage joydev usbhid pcmcia firmware_class tsdev hid snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_seq_midi_event ohci1394 wlan_scan_sta rtc psmouse snd_seq snd_seq_device ide_cd cdrom ieee1394 shpchp pci_hotplug ath_rate_sample snd_pcm snd_timer serio_raw i2c_sis96x parport_pc parport ehci_hcd pcspkr yenta_socket rsrc_nonstatic pcmcia_core sis900 snd soundcore i2c_core ath_pci wlan ath_hal(P) ohci_hcd mii snd_page_alloc sis_agp agpgart usbcore ext3 jbd mbcache ide_disk ata_generic pata_sis libata scsi_mod generic sis5513 ide_core evdev CPU:0 EIP:0060:[e17e625b]Tainted: P VLI EFLAGS: 00213246 (2.6.21-curt #1) EIP is at _nv002714rm+0x5a/0x13a [nvidia] eax: dbf6e000 ebx: e1e99a40 ecx: edx: esi: edi: 000d ebp: d8e6dff4 esp: db951e60 ds: 007b es: 007b fs: 00d8 gs: ss: 0068 Process Xorg (pid: 3165, ti=db95 task=dfd77030 task.ti=db95) Stack: c149ea40 e17e5e00 e1e99a40 c1d0 000d e1e96eb0 c149ea40 d8e6c000 e17e5f1a e1e99a40 c149ea40 dbf6e000 dce1b800 e17e7a32 e1e99a40 c149ea40 e1e99a40 e1e99b5c c149ea40 e1ad3b18 Call Trace: [e17e5e00] _nv008075rm+0x33/0x45 [nvidia] [e17e5f1a] _nv002708rm+0x5c/0x62 [nvidia] [e17e7a32] rm_free_unused_clients+0x7e/0xcc [nvidia] [e1ad3b18] nv_kern_ctl_close+0xa7/0xd3 [nvidia] [e1ad58a1] nv_kern_close+0x6f/0x370 [nvidia] [c01658eb] __fput+0xa5/0x15b [c0163577] filp_close+0x51/0x58 [c0121f4e] put_files_struct+0x5f/0xa7 [c0122f1d] do_exit+0x1ee/0x6ac [c0123447] sys_exit_group+0x0/0xd [c0103cb4] sysenter_past_esp+0x5d/0x81 [c029] unix_create1+0x29/0xe1 === Code: 00 00 a1 b0 6c e9 e1 6a 00 6a 06 50 ff 50 18 83 c4 0c 85 db 74 0b 83 3b 00 74 06 8b 03 8b 10 eb 05 ba 00 00 00 00 a1 b0 6c e9 e1 ff b2 14 48 00 00 6a 09 50 ff 50 18 89 c3 50 ff 90 bc 05 00 00 EIP: [e17e625b] _nv002714rm+0x5a/0x13a [nvidia] SS:ESP 0068:db951e60 Fixing recursive fault but reboot is needed! -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.21-curt (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages nvidia-kernel-source depends on: ii debhelper 5.0.50 helper programs for debian/rules ii dpatch2.0.25 patch maintenance system for Debia ii make 3.81-3 The GNU version of the make util ii sed 4.1.5-2The GNU sed stream editor Versions of packages nvidia-kernel-source recommends: ii devscripts 2.10.4 Scripts to make the life of a Debi ii kernel-package 11.001 A utility for building Linux kerne ii nvidia-glx 100.14.06-1 NVIDIA binary Xorg driver -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429745: Acknowledgement (nvidia-kernel-source: After nvidia splash, x crashes unable to handle kernel paging request)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The problem occurred on 2.6.21, compiled using the kernel package from Debian source with the only change to the config being paravirtualization turned off because otherwise the Nvidia kernel module will not compile. (GPL only violation) I went back to the Debian stock 2.6.18 kernel, and the new Nvidia kernel module 100.14.06 compiles and runs fine. So, unless there is some change before then, I will update this bugreport when 2.6.22 comes out, since I am told that the GPL-Only flag on paravirtuatlization will be removed and therefore the Nvidia kernel module should compile against the Debian stock kernel. Curt- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRnihqS9Y35yItIgBAQKdOAf+KZBKvoVkhD3ykUN5DZDNln1Tkc4jZyRA llGf6t7DgzDB7kyJjFZ/pKE52b9Rry2wvpEQ0A+B18s9LOfKl+4w3/eewVDTJxmB L6p8IBTkg0N3sQArBWgs7pTc66NSmCmG+E/x8VYDoQG+2Lr5TmlC4/yF41KM6243 /3bik8IDuisPceMJurWBDos0cLVaWrHd2VfoQzH2aF4hX++l74r3gQaFaS5ZaElx VZXEPgWFNTU+L6h/xLhN1pJ2XIAZva7ZZyEgfrO1nU1EQIDyOQhQVPIXdX6aJgX8 UMWV1YZhByiFNx5owamVWc3XEHlxC28tKvvcKbY3kJVn8fxjKlaopQ== =wNaE -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#420523: xserver-xorg-core: Cannot find installed Nvidia driver
Package: xserver-xorg-core Version: 2:1.3.0.0.dfsg-2 Severity: important Other people in Debian-user have reported that by downgrading xserver-xorg-core this problem goes away. As of the update yesterday morning, every time I startx, the following error occurs in /var/log/Xorg.0.log (WW) Warning, couldn't open module nvidia (II) UnloadModule: nvidia (EE) Failed to load module nvidia (module does not exist, 0) The Nvidia kernel module was not updated yesterday, and it still shows up: # modprobe nvidia ACPI: PCI Interrupt :01:00.0[A] - GSI 16 (level, low) - IRQ 233 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006 -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 13 2006-05-24 22:34 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1703596 2007-04-21 10:09 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: nVidia Corporation NV31M [GeForce FX Go5600] (rev a1) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 3519 2007-04-22 17:17 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # XF86Config-4 (XFree86 X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type man XF86Config-4 at the shell prompt.) # # This file is automatically updated on xserver-xfree86 package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xfree86 # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom # md5sum /etc/X11/XF86Config-4 /var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure xserver-xfree86 Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/share/fonts/X11/misc FontPath/usr/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/CID FontPath/usr/lib/X11/fonts/CID FontPath/usr/lib/X11/fonts/Speedo FontPath/usr/share/fonts/X11/100dpi FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadrecord Loadtype1 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option XkbRules xfree86 Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection Section Device Identifier NVIDIA Corporation NV31M [GeForce FX Go5600] # Driver nv Driver nvidia # TV Out Setup #Option TwinView #Option TwinViewOrientation Clone #Option TVStandard NTSC #Option TVOutFormat COMPOSITE #Option TVOverScan 0.6 #Option ConnectedMonitor CRT,TV EndSection Section Monitor Identifier Generic Monitor HorizSync 30-60 VertRefresh 50-75 Option DPMS EndSection Section Screen Identifier Default Screen Device NVIDIA Corporation NV31M [GeForce FX Go5600] Monitor Generic Monitor DefaultDepth24 SubSection Display Depth 1 Modes 1400x1050 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 Modes 1400x1050 1024x768 800x600 640x480 EndSubSection SubSection Display Depth
Bug#420523: closed by Julien Cristau [EMAIL PROTECTED] (Re: Bug#420523: xserver-xorg-core: Cannot find installed Nvidia driver)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 22 April 2007, Debian Bug Tracking System was heard to say: This is an automatic notification regarding your Bug report #420523: xserver-xorg-core: Cannot find installed Nvidia driver, which was filed against the xserver-xorg-core package. It has been closed by Julien Cristau [EMAIL PROTECTED]. Their explanation is attached below. If this explanation is unsatisfactory and you have not received a better one in a separate message then please contact Julien Cristau [EMAIL PROTECTED] by replying to this email. Debian bug tracking system administrator (administrator, Debian Bugs database) Well, ok, but when a Debian package doesn't work after a Debian update, I rather consider it a Debian problem. One person on Debian-user has said that the Nvidia binaries work, _if_ the files are put in the new places that the xorg system wants them to be. So yes, I will wait for a new Debian nvidia-kernel-source package. I never intended to do anything else. Curt- - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEUAwUBRivkGC9Y35yItIgBAQId7wf3ZSz8O2850RAEP47ys4IOLLXJ3hEoH/Ar AaMrbXm716wTJa/+e1Fke3p6VOaXSmuk00rO5s2EKntSnYBgCQre72gWlqVPoVxn YxZQfegqYui4miGljdXcFWup+1pwk2T07poPC/8a1oKiEETp8hYffmJJGsHspMTp 8XEetY4oezN/2U+sKKEtIjItbm6sH/kuI/wSGTiSAuJxKh+xWmxoXuwk/Ozt4vsJ APHAE0OO1bqV1ZvjIpzFy5c5F/EnLUPLQcFUoMwhBQ6pVxrnPXm1oOA2rY9+IH2V z4w/ULdXpcveJBC8EgT5V7uqladw36fYuTewkSBdwAtUn3OjtMyd =HIT9 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#420135: nvidia-kernel-source: Compile failes with GPL violation
Package: nvidia-kernel-source Version: 1.0.9746-2 Severity: grave Justification: renders package unusable The module had previously built just fine under kernel 2.6.18, trying to compile for 2.6.20-1 and tonight 2.6.20-2. Tried version presently in unstable first, received the same error then tried Experimental: NVIDIA: calling KBUILD... make CC=gcc-4.1 -C /usr/src/linux-headers-2.6.20-1-686 SUBDIRS=/usr/src/modules/nvidia-kernel/nv modules make[2]: Entering directory `/usr/src/linux-headers-2.6.20-1-686' Building modules, stage 2. MODPOST 1 modules FATAL: modpost: GPL-incompatible module nvidia.ko uses GPL-only symbol 'paravirt_ops' -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.20-1-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages nvidia-kernel-source depends on: ii debhelper 5.0.48 helper programs for debian/rules ii dpatch2.0.21 patch maintenance system for Debia ii make 3.81-3 The GNU version of the make util ii sed 4.1.5-1The GNU sed stream editor Versions of packages nvidia-kernel-source recommends: ii devscripts2.10.3 Scripts to make the life of a Debi ii kernel-package10.068 A utility for building Linux kerne ii nvidia-glx1.0.8776-4 NVIDIA binary XFree86 4.x driver -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403673: /lib/libacl.so.1: symbol getxattr, version ATTR_1.0 not defined in file libattr.so.1 with link time reference
Package: libacl.so.1 Severity: important Hi, Sorry, I don't know which package this library is in. I'm unable to do much of anything with my system, even ls -al gets the following error: $ ls -al ls: relocation error: /lib/libacl.so.1: symbol getxattr, version ATTR_1.0 not defined in file libattr.so.1 with link time reference This started just after apt-get upgrade an hour ago, in fact the error showed up as the upgrade process completed. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403673: Sid: Unable to ls after update a few minutes ago
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 18 December 2006 19:03, Joey Hess was heard to say: Curt Howland wrote: ls: relocation error: /lib/libacl.so.1: symbol getxattr, version ATTR_1.0 not defined in file libattr.so.1 with link time reference - - This is a problem that was fixed in this afternoon's update of unstable. Upgrade the libattr1 package to fix it. I guess I updated just a few hours too early. The joys of unstable! Thank you very much, that fixes it as of 20:15 EST. Curt- - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRYc9RS9Y35yItIgBAQIHFgf/T5saYmA8EQcN6dmjuKQA5PORQG9KO/Yn xX8+QkGgKnoZkbC+v5Y3UA8A8KMH/8AX4JxwSQ4OEgFrN74t4TijPwf0QYNbWwzA TkZAIaMVHPztmlioW7/NwqjvkwB1cFBu+V4wBd6EfBoUK6WfGHawT0XVuUNdMDzI krinMgmvNtGOYbSyW0i+qsX8s5346rLrz5thzjLEP1Xnw6ycgge0Zo8d7R7Ktr4i gGeqjdczCHadSseNQmYALQPYckJhFCILVsJH/Gb9Y1I83cq6ocRlqAlviizAumdx /JlIOoRYgvWINmd7KWmRgoyWGyTZxD/xpWSJ7+K2n7C3Jx5bivoOpQ== =GW/M -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#382829: konq-plugins: move to and copy to missing from Konqueror context menu
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Good morning. On Friday 01 December 2006 02:25 it was so written: With konq-plugins version 4:3.5.5-1 (KDE 3.5.5), these actions are present in the konqueror context menu. Could you check this problem is fixed in your side? Yes, Move To and Copy To are indeed present again. Many thanks. Curt- - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) iQEVAwUBRXAqSC9Y35yItIgBAQIsEQf+IOn69rKnc/kIeZKZDF2n3xUBaVv8Wuqx 3eXnsFl/ajRwDpC/PWrogf+AFGSx+lsTme6k1PhurNmoHyozCfxEON2ai2ZcI5L/ zDZIof3VG2y2tzWMEjZ1MAmsVEHpgffyCN3yuMJlG+l3qhUVsNEl74427LB1viBi NKw1VbsbmkY9Lw1ltnssYvxsxrzRGQfBT3/+C37fy/duks5R+QFd5flPjBadv+e9 iJeXDXoeMqvGuTlSzBLCQWB4WL43areq/aefq8ZJDbLoJvUYfejbMOKhYIz/Tq+V OlJ20N9gG97op+bn+JhHQU89Zktfcex1B2BrnLkK9GBg5tX3UK9AlA== =Ulgj -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#392717: console-common: unary operator expected during preinstal
Package: console-common Version: 0.7.64 Followup-For: Bug #392717 The text of the error I received when doing apt-get upgrade this morning is: Preparing to replace console-common 0.7.62 (using .../console-common_0.7.64_all.deb) ... /var/lib/dpkg/tmp.ci/preinst: line 63: [: -eq: unary operator expected /var/lib/dpkg/tmp.ci/preinst: line 63: [: -eq: unary operator expected -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-486 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages console-common depends on: ii console-data 2:1.0-5 Keymaps, fonts, charset maps, fall ii console-tools 1:0.2.3dbs-65 Linux console and font utilities ii debconf [debconf-2.0] 1.5.6 Debian configuration management sy ii debianutils2.17.3Miscellaneous utilities specific t ii lsb-base 3.1-17Linux Standard Base 3.1 init scrip console-common recommends no packages. -- debconf information: console-data/keymap/template/layout: console-data/keymap/family: qwerty console-data/keymap/powerpcadb: console-data/keymap/template/variant: console-data/keymap/ignored: console-data/keymap/full: console-data/keymap/template/keymap: * console-data/keymap/policy: Don't touch keymap console-data/bootmap-md5sum: none -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#366370: hal failing on boot, will not run
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 11 October 2006 13:46, Sjoerd Simons was heard to say: Just installed fresh Unstable last week, hald never ran correctly. The boot messages say Starting hal daemon...failed. As with the prior ticket, trying to start the daemon by hand also fails, even though hal reports that it is going to run as a daemon there is no process. Can you get it started with --daemon=no --verbose=yes ? Yes. Please forgive the length of this message and the attachment, I hope the bugtrack system doesn't object too strongly. Screen output below, hald.errlog file attached. = # hald --daemon=no --verbose=yes hald.errlog 16:42:26.489 [I] hald.c:472: hal 0.5.8.1 16:42:26.492 [I] hald.c:537: Will not daemonize 16:42:26.496 [I] hald_dbus.c:4059: local server is listening at unix:abstract=/var/run/hald/dbus-uIBTOq0fm7,guid=32572d456ac26254f99ca750b9125d00 Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin' 16:42:26.554 [I] hald_runner.c:218: Runner has pid 10437 16:42:26.630 [I] osspec.c:589: Synthesizing sysfs events... 16:42:26.689 [I] coldplug.c:120: dev_root is /dev 16:42:26.902 [I] coldplug.c:252: found in udevdb '/sys/devices/pci:00/:00:07.2/usb1/usbdev1.1_ep00' '/dev/usbdev1.1_ep00' 16:42:26.904 [I] coldplug.c:252: found in udevdb '/sys/class/usb_device/usbdev1.1' '/dev/bus/usb/001/001' 16:42:26.907 [I] coldplug.c:252: found in udevdb '/sys/devices/pci:00/:00:07.2/usb1/1-0:1.0/usbdev1.1_ep81' '/dev/usbdev1.1_ep81' 16:42:27.033 [I] coldplug.c:252: found in udevdb '/sys/class/tty/ttyS0' '/dev/ttyS0' 16:42:27.137 [I] coldplug.c:252: found in udevdb '/sys/class/input/input0/event0' '/dev/input/event0' 16:42:27.147 [I] coldplug.c:252: found in udevdb '/sys/class/input/input3/ts1' '/dev/input/ts1' 16:42:27.148 [I] coldplug.c:252: found in udevdb '/sys/class/input/input3/event3' '/dev/input/event3' 16:42:27.151 [I] coldplug.c:252: found in udevdb '/sys/class/input/input3/mouse1' '/dev/input/mouse1' 16:42:27.159 [I] coldplug.c:252: found in udevdb '/sys/class/tty/ttyS3' '/dev/ttyS3' 16:42:27.162 [I] coldplug.c:252: found in udevdb '/sys/class/tty/ttyS2' '/dev/ttyS2' 16:42:27.164 [I] coldplug.c:252: found in udevdb '/sys/class/tty/ttyS1' '/dev/ttyS1' 16:42:27.167 [I] coldplug.c:252: found in udevdb '/sys/class/graphics/fb0' '/dev/fb0' 16:42:27.171 [I] coldplug.c:252: found in udevdb '/sys/class/input/input1/event1' '/dev/input/event1' 16:42:27.176 [I] coldplug.c:252: found in udevdb '/sys/class/ppdev/parport0' '/dev/parport0' 16:42:27.179 [I] coldplug.c:252: found in udevdb '/sys/class/printer/lp0' '/dev/lp0' 16:42:27.292 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa8' '/dev/vcsa8' 16:42:27.294 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs8' '/dev/vcs8' 16:42:27.296 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa3' '/dev/vcsa3' 16:42:27.297 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs3' '/dev/vcs3' 16:42:27.299 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa6' '/dev/vcsa6' 16:42:27.302 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs6' '/dev/vcs6' 16:42:27.303 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa4' '/dev/vcsa4' 16:42:27.306 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs4' '/dev/vcs4' 16:42:27.308 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa5' '/dev/vcsa5' 16:42:27.310 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs5' '/dev/vcs5' 16:42:27.311 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa2' '/dev/vcsa2' 16:42:27.314 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs2' '/dev/vcs2' 16:42:27.316 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa1' '/dev/vcsa1' 16:42:27.317 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs1' '/dev/vcs1' 16:42:27.319 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcsa' '/dev/vcsa' 16:42:27.322 [I] coldplug.c:252: found in udevdb '/sys/class/vc/vcs' '/dev/vcs' 16:42:27.324 [I] coldplug.c:252: found in udevdb '/sys/class/mem/kmsg' '/dev/kmsg' 16:42:27.327 [I] coldplug.c:252: found in udevdb '/sys/class/mem/urandom' '/dev/urandom' 16:42:27.329 [I] coldplug.c:252: found in udevdb '/sys/class/mem/random' '/dev/random' 16:42:27.331 [I] coldplug.c:252: found in udevdb '/sys/class/mem/full' '/dev/full' 16:42:27.431 [I] coldplug.c:252: found in udevdb '/sys/class/mem/zero' '/dev/zero' 16:42:27.433 [I] coldplug.c:252: found in udevdb '/sys/class/mem/port' '/dev/port' 16:42:27.435 [I] coldplug.c:252: found in udevdb '/sys/class/mem/null' '/dev/null' 16:42:27.437 [I] coldplug.c:252: found in udevdb '/sys/class/mem/kmem' '/dev/kmem' 16:42:27.440 [I] coldplug.c:252: found in udevdb '/sys/class/mem/mem' '/dev/mem' 16:42:27.442 [I] coldplug.c:252: found in udevdb '/sys/class/input/input2/ts0' '/dev/input/ts0' 16:42:27.444 [I] coldplug.c:252: found in udevdb '/sys/class/input/input2/event2' '/dev/input/event2' 16:42:27.447 [I]
Bug#391921: Boot Message
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 BTW, the Alsa boot message is as follows: - -- Setting up ALSA...done (none loaded). - -- Alsa doesn't show up in dmesg either. I also tried #alsactl store after alsacfg was successful, to no effect. Curt- - -- September 11th, 2001 The most successful single day ever for gun control and central planning advocates in American history. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) iQEVAwUBRSutlS9Y35yItIgBAQL5kgf7BJI50dMSFAbEpEA1QZEHcYlMKY+LcAoZ FICrV9k3ihr8k3dOfqyC/mFmdxJioJAsTraOoP1Uiz5QJUggV7rh33i2FE7zJh43 8nxOuZ74mlNOvnBcGnU21HgF2jD3prsmMsdBHm45L0kbSbEv1EdGl7ESRreu/kAh sM0EpmXRonUlQX1jA/gN1cVJ4u40/qOZiyn8c0xp8kYxyOYBDy4gcCD6Edd6+DiC y/n1wWpfrdPGNSPmz7RkpSqpTZN+tRoa2nhE77zvJz1guBieZPE1FsFRZ/5YoIlS vFiPIHMjD9DZxQftVimsc+FYxjwGhWwOhnuee32FMzUlXHDyJVK/hg== =bTxJ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#366370: hal failing on boot, will not run
Package: hal Version: 0.5.8.1-1 Followup-For: Bug #366370 Just installed fresh Unstable last week, hald never ran correctly. The boot messages say Starting hal daemon...failed. As with the prior ticket, trying to start the daemon by hand also fails, even though hal reports that it is going to run as a daemon there is no process. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-486 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages hal depends on: ii adduser 3.97 Add and remove users and groups ii dbus 0.93-1 simple interprocess messaging syst ii libc6 2.3.6.ds1-6GNU C Library: Shared libraries ii libdbus-1-3 0.93-1 simple interprocess messaging syst ii libdbus-glib-1-2 0.71-2 simple interprocess messaging syst ii libexpat1 1.95.8-3.3 XML parsing C library - runtime li ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libhal-storage1 0.5.8.1-1 Hardware Abstraction Layer - share ii libhal1 0.5.8.1-1 Hardware Abstraction Layer - share ii libusb-0.1-4 2:0.1.12-2 userspace USB programming library ii libvolume-id0 0.100-2libvolume_id shared library ii lsb-base 3.1-17 Linux Standard Base 3.1 init scrip ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities ii udev 0.100-2/dev/ and hotplug management daemo ii usbutils 0.72-6 USB console utilities hal recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#391921: alsaconf does not save changes
Package: alsaconf Severity: important Other people are reporting the same problem. Alsaconf does not save its changes through a reboot. Alsaconf asks if the user wants to update /etc/modprobe.d/sound and /etc/modprobe.conf, but neither of these files exists in a recent install of Sid or, if other folks are to be believed, Testing either. There is also no message during shutdown that alsa settings being saved, a message that comes up in my long-established system. I _think_ alsaconf needs to be updated to write its changes to /etc/modules and this is what has been suggested to be done by hand in debian-user. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-486 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#391921: Update to alsaconf not saving changes
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 BTW, during this latest cycle, I tried touch /etc/modprobe.conf to see if that would be updated by alsaconf if the file simply existed. It was not, and the file does not exist now, but _this_ time the file /etc/modprobe.d/sound was created with the correct settings in it. I will forward the results of the next reboot, which I'll do shortly, if the status was retained this time. Curt- - -- September 11th, 2001 The most successful single day ever for gun control and central planning advocates in American history. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) iQEVAwUBRSpOLC9Y35yItIgBAQIRNwf/aoZafKHIQN4BjHRdpNryAYZvkL+m1pGR ej3TPFFI9KJTS4VNAXtXIIkievai+M2g7NmR+dH3vW9jNGqLMtLSO7hNNXQqkYFq ARSQfwG99DCpHO5cbmEt6rd7dhYSuBPJQrKWrXlKnTIDhh/W2p+Kp9bOb94hLQWE 64eneWIdJTfbPTEZNr3gYYSPaMio7i7cxV5qNp21YGP/YGaxxrG9Bg4gn8j9tIax P4nbxa8h5c7rsULj67qwte8eUh26F8ayn6kjkjAAsOl+QnKVSz3jOgmwRz5inrtI AsTEAvXM3NoFno+iu1EvOLTd2ny+0EbGOjP3BTZxeNgx7SS3goup4Q== =K9TO -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#383506: update-menus fails with script error
Yes, it is working now. Thank you very much for all your efforts. Curt- On Saturday 26 August 2006 08:02, Bill Allombert was heard to say: reassign 383506 apollon tags 383506 fixed quit On Thu, Aug 17, 2006 at 01:48:33PM -0400, Curt Howland wrote: As root, I get the following errors. Because of my window width, I'm not sure the carrat is in the right place: - # update-menus In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = Hello Curt, this error message means that the package apollon include an incorrect menu file. I am not sure which version of apollon was installed on your system, but I expect it to be 1.0.1-3 (due to the date of the report). In that case this is likely a duplicate of bug #383383 which was fixed in apollon 1.0.1-4. I will let the apollon maintainer closing it. Thanks for your bug report, -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#383506: update-menus fails with script error
Package: update-menus Severity: important I noticed that I didn't have Debian under the K menu in KDE, so I poked around and discovered that update-menus is not functioning. As root, I get the following errors. Because of my window width, I'm not sure the carrat is in the right place: - # update-menus In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = install-menu: /etc/menu-methods/twm: aborting update-menus[4531]: Script /etc/menu-methods/twm returned error status 1. In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = install-menu: /etc/menu-methods/menu-xdg: aborting update-menus[4531]: Script /etc/menu-methods/menu-xdg returned error status 1. In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = install-menu: /etc/menu-methods/windowlab: aborting update-menus[4531]: Script /etc/menu-methods/windowlab returned error status 1. In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = install-menu: /etc/menu-methods/xdg-desktop-entry-spec-dirs: aborting update-menus[4531]: Script /etc/menu-methods/xdg-desktop-entry-spec-dirs returned error status 1. In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = install-menu: /etc/menu-methods/xdg-desktop-entry-spec-sessions: aborting update-menus[4531]: Script /etc/menu-methods/xdg-desktop-entry-spec-sessions returned error status 1. In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = install-menu: /etc/menu-methods/olwm: aborting update-menus[4531]: Script /etc/menu-methods/olwm returned error status 1. In file /usr/share/menu/apollon, at (or in the definition that ends at) line 1: [...]sharing daemon giFT command=/usr/bin/apollon icon=icon=/usr/share/pixmaps/apollon.xpm needs=package(apollon):needs=X11 package=apollon section=section=Apps/Net title=longtitle=Graphical [...] ^ Expected: = install-menu: /etc/menu-methods/xdg-desktop-entry-spec-apps: aborting update-menus[4531]: Script /etc/menu-methods/xdg-desktop-entry-spec-apps returned error status 1. --- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#382829: konq-plugins: move to and copy to missing from Konqueror context menu
Package: konq-plugins Version: 4:3.5.2-1 Severity: normal A couple of days ago I noticed that move to: and copy to: are missing from the right-click-on-a-file context menu in Konqueror. The same action on the desktop has the move and copy entries. I looked it up at KDE and it says the plug-in is Kuick, and I do not see Kuick in Konqueror=Settings=ConfigureExtentions although I don't know if it should show up there or not. It was a nice feature. If the decision was made to remove it, then I guess I'll live with it. Thank you for making Debian KDE such a good environment. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages konq-plugins depends on: ii kdelibs4c2a 4:3.5.4-3core libraries and binaries for al ii konqueror 4:3.5.4-2KDE's advanced file manager, web b ii libarts1c2a 1.5.4-1 aRts sound system core components ii libc6 2.3.6-19 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-10 GCC support library ii libice6 1:1.0.0-3X11 Inter-Client Exchange library ii libjpeg-progs 6b-13Programs for manipulating JPEG fil ii libkonq44:3.5.4-2core libraries for Konqueror ii libpng12-0 1.2.8rel-5.2 PNG library - runtime ii libqt3-mt 3:3.3.6-3Qt GUI Library (Threaded runtime v ii libsm6 1:1.0.0-4X11 Session Management library ii libstdc++6 4.1.1-10 The GNU Standard C++ Library v3 ii libx11-62:1.0.0-8X11 client-side library ii libxext61:1.0.0-4X11 miscellaneous extension librar ii python 2.3.5-11 An interactive high-level object-o ii zlib1g 1:1.2.3-13 compression library - runtime Versions of packages konq-plugins recommends: ii akregator4:3.5.3-3 RSS feed aggregator for KDE ii ark 4:3.5.4-1 graphical archiving tool for KDE ii imagemagick 7:6.2.4.5.dfsg1-0.9 Image manipulation programs -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#366630: nvidia-kernel-2.6.16-1-686: prebuilt nvidia-kernel module fails, self-built works
Package: nvidia-kernel-2.6.16-1-686 Version: 1.0.8756+1 Followup-For: Bug #366630 The pre-built nvidia-kernel-2.6.16-1-686 fails, Xlog shows unable to load, but if I build it from the nvidia-kernel-source it works just fine. When I run dselect, it automatically upgrades to the prebuilt kernel module, which then fails to load next time I restart Xwindows. I keep the hand-built module and simply dpkg -i nvidia-kernel-2.6.16-1-686_1.0.8756-4_i386.deb and X starts just fine. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages nvidia-kernel-2.6.16-1-686 depends on: ii nvidia-kernel-common 20051028+1 NVIDIA binary kernel module common Versions of packages nvidia-kernel-2.6.16-1-686 recommends: ii linux-image-2.6.16-1-686 2.6.16-12 Linux kernel 2.6.16 image on PPro/ -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358859: linux-headers-2.6.16-1-686: modules-assistant reports unconfigured source
According to other folks, the modules-assistant compiles madwifi just fine even with the error message. Second, with the 1.0.8178-3 version of the nvidia kernel source, it is no longer looking for the header file that has gone missing from 2.6.16 that was in 2.6.15 and earlier, and so it compiles just fine now also. Since this problem is well known, covered in other bugreports, and a deliberate change anyway, please close this bugreport. Curt- -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339057: linux-image-2.6.14-1-686: Cannot turn DMA on for /dev/hda
This problem was solved with 2.6.15, and continues to work in 2.6.16, so I figure it's ok to close the bugreport. Thanks for all the help, Curt- -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358859: linux-headers-2.6.16-1-686: modules-assistant reports unconfigured source
Package: linux-headers-2.6.16-1-686 Version: 2.6.16-2 Severity: normal Hi. I have two kernel modules which I build from source, both of which worked perfectly well with 2.6.15 but both fail when trying to compile for 2.6.16. When I tried building madwifi, module-assistant reported unconfigured source when examining the linux-headers-2.6.16-1-686 tree. Building the module didn't work. When I tried building the nvidia kernel module, I received lots of error messages that seem to me to be related to the kernel source headers not having been configured, the same kind of problem as module-assistant reported. I dumped the nvidia build messages to a file and will append them to this ticket in a separate message so things don't get too messy. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages linux-headers-2.6.16-1-686 depends on: ii linux-headers-2.6.16-12.6.16-2 Common header files for Linux kern linux-headers-2.6.16-1-686 recommends no packages. -- no debconf information # select which makefile to use. rm -f /usr/src/modules/nvidia-kernel/nv/Makefile || true if [ 6 = 6 ]; then \ cd /usr/src/modules/nvidia-kernel/nv ; \ ln -s Makefile.kbuild Makefile ; \ cd .. ; \ if [ 0 = 1 ] ; then \ dpatch apply 04_minion ; \ fi ; \ if [ 0 = 1 ]; then \ dpatch apply 01_sysfs ; \ dpatch status 01_sysfs patch-stamp ; \ dpatch apply 02_pcialias ; \ dpatch status 02_pcialias patch-stamp ; \ fi ; \ fi if [ 6 = 4 ]; then \ cd /usr/src/modules/nvidia-kernel/nv ; \ ln -s Makefile.nvidia Makefile ; \ cd .. ; \ fi #nothing here anymore touch configure-stamp if [ -f /usr/src/modules/nvidia-kernel/debian/control.template ]; then \ cp /usr/src/modules/nvidia-kernel/debian/control.template /usr/src/modules/nvidia-kernel/debian/control; \ fi dh_testdir dh_testroot PATCHLEVEL = 6 Kernel compiler version : 4.0.3 Detected compiler version : 4.0.3 Using compiler gcc-4.0 version 4.0.3 touch /usr/src/modules/nvidia-kernel/nv/gcc-check touch /usr/src/modules/nvidia-kernel/nv/cc-sanity-check ## Main Make ## IGNORE_CC_MISMATCH=1 CC=gcc-4.0 /usr/bin/make -C /usr/src/modules/nvidia-kernel/nv -f Makefile SYSSRC=/usr/src/linux-headers-2.6.16-1-686 KBUILD_PARAMS=-C /usr/src/linux-headers-2.6.16-1-686 SUBDIRS=/usr/src/modules/nvidia-kernel/nv module; make[1]: Entering directory `/usr/src/modules/nvidia-kernel/nv' NVIDIA: calling KBUILD... make CC=gcc-4.0 -C /usr/src/linux-headers-2.6.16-1-686 SUBDIRS=/usr/src/modules/nvidia-kernel/nv modules make[2]: Entering directory `/usr/src/linux-headers-2.6.16-1-686' CC [M] /usr/src/modules/nvidia-kernel/nv/os-interface.o make[2]: Leaving directory `/usr/src/linux-headers-2.6.16-1-686' NVIDIA: left KBUILD. nvidia.ko failed to build! make[1]: Leaving directory `/usr/src/modules/nvidia-kernel/nv' -Following was dumped to console, redirect didn't catch it: In file included from include/linux/list.h:7, from include/linux/wait.h:23, from include/asm/semaphore.h:41, from include/linux/sched.h:20, from include/linux/module.h:10, from /usr/src/modules/nvidia-kernel/nv/nv-linux.h:47, from /usr/src/modules/nvidia-kernel/nv/os-interface.c:26: include/linux/prefetch.h: In function 'prefetch_range': include/linux/prefetch.h:62: warning: pointer of type 'void *' used in arithmetic In file included from include/linux/dmapool.h:14, from include/linux/pci.h:522, from /usr/src/modules/nvidia-kernel/nv/nv-linux.h:71, from /usr/src/modules/nvidia-kernel/nv/os-interface.c:26: include/asm/io.h: In function 'check_signature': include/asm/io.h:258: warning: wrong type argument to increment In file included from /usr/src/modules/nvidia-kernel/nv/os-interface.c:26: /usr/src/modules/nvidia-kernel/nv/nv-linux.h:715:2: warning: #warning conftest.sh failed, assuming remap_page_range(4)! /usr/src/modules/nvidia-kernel/nv/os-interface.c: In function 'os_set_mlock_capability': /usr/src/modules/nvidia-kernel/nv/os-interface.c:1375: error: 'struct task_struct' has no member named 'rlim' make[3]: *** [/usr/src/modules/nvidia-kernel/nv/os-interface.o] Error 1 make[2]: *** [_module_/usr/src/modules/nvidia-kernel/nv] Error 2 make[1]: *** [mdl] Error 1 make: *** [build-stamp] Error 2
Bug#355292: dselect welcome to main package listing screen changed behavior
Package: dselect Version: 1.13.16 Severity: wishlist Good afternoon. Some time around when Sarge was released, the dselect welcome to dselect's main package listing screen changed behavior. When I first used it, the required keystroke was the space-bar to go from that screen to the actual listing. But then, I started using dselect in 1995. Then between when Woody and Sarge were released (I've been tracking Sid the whole time), I think, the behavior changed and instead of the space-bar to continue, it became hit enter to continue. While a surprise, I realized that it was much more consistent and logical, since everywhere else in dselect hitting enter is what is used to simply continue. However, when Sarge was released (or some time around then) the behavior revered back to space. This has been bugging me ever since. So I politely request that the behavior of dselect be changed back to the consistency of using enter as the continue button everywhere, including the welcome to dselect's main package listing page. Thank you for taking the time to consider this request regardless. BTW, people don't say Thank You enough. Thank you for all your hard work, which is what makes Debian the distribution that it is. Without the Debian Developers, there wouldn't be any reason to use it. I admire and respect all the effort it takes to keep things working as remarkably well as this system you have created does. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages dselect depends on: ii dpkg 1.13.16package maintenance system for Deb ii libc6 2.3.6-3GNU C Library: Shared libraries an ii libgcc1 1:4.0.2-9 GCC support library ii libncurses5 5.5-1 Shared libraries for terminal hand ii libstdc++64.0.2-9The GNU Standard C++ Library v3 dselect recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350045: Error in /var/lib/defoma/scripts/gs.defoma
Package: defoma Version: 0.11.8-0.1 Severity: minor When installing fonts in dselect, I noticed the following error was printed many times: Registering /usr/share/fonts/truetype/mikachan/mikachan-PS.ttf.. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. The first line is for example purposes, the second is what is repeated sometimes 10 and more times in a row. Just thought y'all might like to know, I cannot tell if it has impacted the usability of the font. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages defoma depends on: ii dialog1.0-20060101-1 Displays user-friendly dialog boxe ii file 4.15-2 Determines file type using magic ii perl 5.8.7-10 Larry Wall's Practical Extraction ii whiptail 0.51.6-31 Displays user-friendly dialog boxe Versions of packages defoma recommends: ii libft-perl1.2-15 Perl module for the FreeType libra -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#348929: k3b: Cannot verify written data DVD
Package: k3b Version: 0.12.10-2 Severity: normal When I select verify, the data DVD writes and ejects, but when I close the DVD drive and hit OK to continue, K3b reports cannot read file ... and lists the first file on the disk. Obviously, this fails the verify. I have tried CDs, and verify works just fine. I thought the 3.5 media detector might be interfering with verify, so I also tried it under olwm with the same results. Here is the debugging output: System --- K3b Version: 0.12.10 KDE Version: 3.5.0 QT Version: 3.3.5 Kernel: 2.6.15-1-686 Devices --- SONY DVD RW DW-U50A 1.5a (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R96R; Restricted Overwrite] K3b --- Size of filesystem calculated: 2273157 Used versions --- growisofs: 5.21 growisofs --- Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs=32k seek=0' /dev/hdc: Current Write Speed is 1.0x1385KBps. 7897088/4655425536 ( 0.2%) @0.7x, remaining 49:02 12615680/4655425536 ( 0.3%) @1.0x, remaining 49:04 17203200/4655425536 ( 0.4%) @1.0x, remaining 49:25 4646174720/4655425536 (99.8%) @1.0x, remaining 0:06 4650762240/4655425536 (99.9%) @1.0x, remaining 0:03 4655382528/4655425536 (100.0%) @1.0x, remaining 0:00 /dev/hdc: flushing cache /dev/hdc: updating RMA /dev/hdc: closing disc growisofs command: --- /usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:2273157 -dvd-compat -speed=1 mkisofs --- 2273157 INFO: ISO-8859-1 character encoding detected by locale settings. Assuming ISO-8859-1 encoded filenames on source filesystem, use -input-charset to override. 0.02% done, estimate finish Fri Jan 20 06:50:58 2006 0.04% done, estimate finish Thu Jan 19 23:36:36 2006 0.07% done, estimate finish Thu Jan 19 21:08:21 2006 99.95% done, estimate finish Thu Jan 19 17:02:46 2006 99.97% done, estimate finish Thu Jan 19 17:02:46 2006 99.99% done, estimate finish Thu Jan 19 17:02:47 2006 Total translation table size: 0 Total rockridge attributes bytes: 2925 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used 21000 2273157 extents written (4439 MB) mkisofs command: --- /usr/bin/mkisofs -gui -graft-points -volid Suzuka 1-26 Complete -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /home/curt/.kde/tmp-dierdre/k3bTeH77b.tmp -rational-rock -hide-list /home/curt/.kde/tmp-dierdre/k3bLcDx0b.tmp -joliet -hide-joliet-list /home/curt/.kde/tmp-dierdre/k3bDQ0ksc.tmp -full-iso9660-filenames -iso-level 2 -path-list /home/curt/.kde/tmp-dierdre/k3bouo1Sb.tmp -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages k3b depends on: ii cdparanoia3a9.8-11 An audio extraction tool for sampl ii cdrecord 4:2.01+01a03-5 command line CD writing tool ii kcontrol 4:3.5.0-4 control center for KDE ii kdebase-bin 4:3.5.0-4 core binaries for the KDE base mod ii kdelibs-data 4:3.5.0-3 core shared data for all KDE appli ii kdelibs4c2a 4:3.5.0-3 core libraries for all KDE applica ii libacl1 2.2.34-1 Access control list shared library ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libattr1 2.4.25-1 Extended attribute shared library ii libaudio2 1.7-3 The Network Audio System (NAS). (s ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libdbus-1-2 0.60-5 simple interprocess messaging syst ii libdbus-qt-1-1c2 0.60-5 simple interprocess messaging syst ii libexpat1 1.95.8-3 XML parsing C library - runtime li ii libfam0 2.7.0-8client library to control the FAM ii libfontconfig12.3.2-1.1 generic font configuration library ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libgcc1 1:4.0.2-7 GCC support library ii libhal1 0.5.5.1-5 Hardware Abstraction Layer - share ii libice6 6.9.0.dfsg.1-4 Inter-Client Exchange library ii libidn11 0.5.18-1 GNU libidn library, implementation ii libjpeg62 6b-11
Bug#348929: k3b: Cannot verify written data DVD
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Francois, indeed it does seem to be the same error. Sorry I didn't check the KDE bugtrack this time. :^( However, I have added a comment to that bug that I did get a successful verify when burning a CD from .ISO file. I haven't tried a DVD from .ISO, or a data CD with individual files, to test the other two variations in the matrix. Curt- On Thursday 19 January 2006 19:42 it was so written: Hi Curt, I just had a quick look at your bug report and I was wondering if it's similar to this bug: http://bugs.kde.org/show_bug.cgi?id=119544 Francois - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) iQEVAwUBQ9A13i9Y35yItIgBAQLGnwf+J9vvyT5369/8JewfaucIicYsw2p4jRSK 04BBFrQm9Q/rQlz5RztrTeVSfsWIVJQI3Qg171xvxHOAcPsEkIBFqhuiBVEMPAcj 8vKwNO4iQuvIuBdWZXDrbIdRrE4aLT0LPwWZGd5uYblS4ayp1tCRqafPXMSGmQNQ nGMLstInjHwEHSBN1OCR2N/XYR+ONXfVGqk6Elq72/uLP6ynOR4WOP6NcMiPPDyi vpMVyO0KHOQRMpg6hAUY19lEo0zcGlHh9HiLQV2yrvqvFwOtsZ8GPMridwcLgB5G McBvL3pQn59Onb22X5eGTwz+vUxWPHQ5XSm0vJSJUvFRsn/atXubhw== =vZpd -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#238865: olwm used to show up in display manager menu
Package: olwm Version: 3.2p1.4-19.1 Followup-For: Bug #238865 I had to create a olwm.desktop file in /usr/share/xsessions, by copying the one that kde automatically creates. When did olwm stop creating the file? I noticed that twm, olwm and windowlab all stopped showing up in the display manager list about the same time. This problem occurs in sarge and sid, and I must therefore assume etch. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-486 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages olwm depends on: ii libc6 2.3.5-11 GNU C Library: Shared libraries an ii libx11-6 6.9.0.dfsg.1-3 X Window System protocol client li ii libxext6 6.9.0.dfsg.1-3 X Window System miscellaneous exte ii xlibs 6.9.0.dfsg.1-3 X Window System client libraries m ii xviewg3.2p1.4-19.1 XView shared libraries [libc6] olwm recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#348095: twm does not show up in the kdm menu
Package: twm Version: 6.9.0.dfsg.1-3 Severity: wishlist I had to create a twm.desktop file in /usr/share/xsessions, by copying the one that kde automatically creates. When did twm stop creating the file? I noticed that olwm twm and windowlab all stopped showing up in the display manager list about the same time. This problem occurs in sarge and sid, and I must therefore assume etch. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-486 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages twm depends on: ii libc6 2.3.5-11 GNU C Library: Shared libraries an ii libice6 6.9.0.dfsg.1-3 Inter-Client Exchange library ii libsm66.9.0.dfsg.1-3 X Window System Session Management ii libx11-6 6.9.0.dfsg.1-3 X Window System protocol client li ii libxext6 6.9.0.dfsg.1-3 X Window System miscellaneous exte ii libxmu6 6.9.0.dfsg.1-3 X Window System miscellaneous util ii libxp66.9.0.dfsg.1-3 X Window System printing extension ii libxt66.9.0.dfsg.1-3 X Toolkit Intrinsics ii menu 2.1.27 generates programs menu for all me twm recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#348120: kdm does not list available window managers in menu list
Package: kdm Version: 4:3.5.0-4 Severity: normal kdm used to list twm, olwm, and other installed window managers a couple years ago when I first installed kdm, I do not remember which Debian release it was. I recently installed Sarge, and updated to Sid. olwm and twm have been installed the entire time, but never showed up in the menu in kdm. I put in a wish-list bug with olwm, that I had to create a file for olwm (and twm) by hand in /usr/share/xsessions, === When did olwm stop creating the file? It never did. As I said, olwm registers the x-window-manager alternative which can be used easily to generate a list of all installed window managers. I guess there is some application that did exactly that and now no longer does it. But I don't have the slightest idea about which one that could be. Martin === Maybe someone could forward this bug to whatever maintainer/package/committee it is that decides if it is a core X issue, a kdm issue, or the responsibility of the individual window manager to write a file into /usr/share/xsessions. Whatever it is, I think it would be greatly appreciated, if the comments I and others on the user list have made are any indication. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-486 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages kdm depends on: ii debconf [debconf-2.0] 1.4.67 Debian configuration management sy ii kdebase-bin 4:3.5.0-4 core binaries for the KDE base mod ii kdebase-data 4:3.5.0-4 shared data files for the KDE base ii kdelibs4c2a 4:3.5.0-3 core libraries for all KDE applica ii libc6 2.3.5-11 GNU C Library: Shared libraries an ii libgcc1 1:4.0.2-6 GCC support library ii libpam-runtime0.79-3 Runtime support for the PAM librar ii libpam0g 0.79-3 Pluggable Authentication Modules l ii libqt3-mt 3:3.3.5-3 Qt GUI Library (Threaded runtime v ii libstdc++64.0.2-6The GNU Standard C++ Library v3 ii libx11-6 6.9.0.dfsg.1-3 X Window System protocol client li ii libxau6 6.9.0.dfsg.1-3 X Authentication library ii libxdmcp6 6.9.0.dfsg.1-3 X Display Manager Control Protocol ii libxtst6 6.9.0.dfsg.1-3 X Window System event recording an ii xbase-clients 6.9.0.dfsg.1-3 miscellaneous X clients Versions of packages kdm recommends: ii logrotate 3.7.1-2Log rotation utility -- debconf information: kdm/stop_running_server_with_children: false * shared/default-x-display-manager: kdm kdm/daemon_name: /usr/bin/kdm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#343048: Additional information
Suggest merge with #343042, it seems this is happening to lots of people. I attempted the fix mentioned in #343042, adding MODULE ide-generic and MODULE ide-disk to /etc/haird/Default.cfg, and running yaird -v -o /boot/initrd.img-2.6.14-2-686 2.6.14-2-686, but the same error occured. I have not yet downgraded yaird. Curt- -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#343048: linux-image-2.6.14-2-686: IDE failure boot message
Package: linux-image-2.6.14-2-686 Version: 2.6.14-5 Followup-For: Bug #343048 I took a picture of the failure message that was not included in the message opening this bug report: Right after mice: and input: messages, Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33 MHz system bus speed for PIO modes; overri[out of picture, normal message Curt-] /bin/cat: /sys/block/hda/dev: No such file or directory Waiting 2 seconds for /sys/block/hda/dev to show up Above message repeats with doubling of seconds until 16 is reached, then the system prints Debug Opportunity ^D to continue which seems to be just a raw bash session. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages linux-image-2.6.14-2-686 depends on: ii module-init-tools 3.2.2-1tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-1 Yet Another mkInitRD Versions of packages linux-image-2.6.14-2-686 recommends: pn libc6-i686none (no description available) -- debconf information: linux-image-2.6.14-2-686/preinst/already-running-this-2.6.14-2-686: linux-image-2.6.14-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.14-2-686/postinst/create-kimage-link-2.6.14-2-686: true linux-image-2.6.14-2-686/preinst/initrd-2.6.14-2-686: linux-image-2.6.14-2-686/preinst/bootloader-initrd-2.6.14-2-686: true linux-image-2.6.14-2-686/postinst/old-system-map-link-2.6.14-2-686: true linux-image-2.6.14-2-686/preinst/failed-to-move-modules-2.6.14-2-686: linux-image-2.6.14-2-686/postinst/depmod-error-initrd-2.6.14-2-686: false linux-image-2.6.14-2-686/postinst/old-dir-initrd-link-2.6.14-2-686: true linux-image-2.6.14-2-686/preinst/elilo-initrd-2.6.14-2-686: true linux-image-2.6.14-2-686/prerm/would-invalidate-boot-loader-2.6.14-2-686: true linux-image-2.6.14-2-686/preinst/overwriting-modules-2.6.14-2-686: true linux-image-2.6.14-2-686/preinst/abort-install-2.6.14-2-686: linux-image-2.6.14-2-686/postinst/kimage-is-a-directory: linux-image-2.6.14-2-686/preinst/lilo-initrd-2.6.14-2-686: true linux-image-2.6.14-2-686/prerm/removing-running-kernel-2.6.14-2-686: true linux-image-2.6.14-2-686/postinst/depmod-error-2.6.14-2-686: false linux-image-2.6.14-2-686/postinst/bootloader-test-error-2.6.14-2-686: linux-image-2.6.14-2-686/postinst/old-initrd-link-2.6.14-2-686: true linux-image-2.6.14-2-686/postinst/bootloader-error-2.6.14-2-686: linux-image-2.6.14-2-686/preinst/abort-overwrite-2.6.14-2-686: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339057: linux-image-2.6.14-1-686: Cannot turn DMA on for /dev/hda
Package: linux-image-2.6.14-1-686
Version: 2.6.14-2
Severity: important
I have 2.6.12 and 2.6.14 (686 P4) installed on this machine. If I boot back into
2.6.12 DMA is on for /dev/hda. It is off in 2.6.14 and will not enable:
# hdparm -d 1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma= 0 (off)
This has, as you can imagine, very detrimental effects with ext3
filesystem responsiveness. Ugh!
DMA has worked in every kernel image I have used with this machine,
tracking Sid since summer 2003 with 2.4 and 2.6 kernels. Until now, that
is.
Please let me know what other information you might need. Here is a
hdparm -i just in case that helps.
/dev/hda:
Model=HITACHI_DK23EA-60, FwRev=00K2A0A3, SerialNo=DZ4767
Config={ HardSect NotMFM HdSw15uSec Fixed DTR10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117210240
IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3:
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.14-1-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages linux-image-2.6.14-1-686 depends on:
ii module-init-tools 3.2-pre9-4 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.11-12 Yet Another mkInitRD
linux-image-2.6.14-1-686 recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339058: linux-image-2.6.14-1-686: 2.6.14 frame buffer no longer enabled in binary package
Package: linux-image-2.6.14-1-686 Version: 2.6.14-2 Severity: wishlist First, thank you for all your astounding work keeping Debian the best distribution bar none. Until 2.6.14, I was able to use vga=791 for framebuffer in lilo.conf, and found the substantially larger console very useful. vga=791 no longer functions, in fact it causes the console to fail entirely. I looked in the /etc/yaird/Default.cfg and it says OPTIONAL MODULE fbcon so maybe the framebuffer has to be compiled in. Sorry I cannot be more help, I tried compiling my own 2.6.14, and got hopelessly lost even though compiling in the frame buffer did work. Curt- -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages linux-image-2.6.14-1-686 depends on: ii module-init-tools 3.2-pre9-4 tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.11-12 Yet Another mkInitRD linux-image-2.6.14-1-686 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339058: Well, this afternoon it works. vga=791
Just after I filed this wishlist item, I decided to try again. This time vga=791 works. Surprisingly, the characters are even smaller than when running 2.6.12. It's better than 80x25, though. Please excuse the bug report, I guess it's already obsolete. Curt- -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339058: Well, this afternoon it works. vga=791
On Monday 14 November 2005 17:03, Jonas Smedegaard was heard to say: No need for excuse: this is highly relevant info, as I suspect it shows that the recent yaird inclusion of fbcon is what solves this. Could it be that even if you noticed the new fbcon line in Default.cfg, your image is in fact from an older date so does not include this? Yes indeed. This afternoon, after I let the fact that fbcon was in there sink in for a few minutes (the 2-year-old was asleep, amazing what a difference that makes in my attention span!), and realized I didn't remember it when I looked in Default.cfg the first time last week, I decided to do something suggested by the folks on debian-user and reinstall so yaird would generate a new initrd. I did that by dpkg-reconfigure linux-image-2.6.14-1-686 and watched to make sure that yaird was mentioned in the output. It was, and that's when I tried putting vga=791 back in to lilo.conf and it worked. The reason I am interested in this is that with the newest kernel release fbcon is builtin, so you are one of the last to help figure out if fbcon is actually needed to be builtin. Well, it worked today when it didn't work when I first installed 2.6.14, so indeed something in the mean time changed for the better. Can you think of any additionall information I might be able to provide? I do not remember editing any files by hand other than lilo.conf. I just looked at Default.cfg, I didn't change anything. I hope that helps. - Jonas Curt- -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history pgpa8zb0pdxYH.pgp Description: PGP signature
Bug#339057: No change with kernel 2.6.14-2-686
I noticed that this evening there's been an update to 2.6.14-2-686, so I installed it and tried again. No change, I still receive this error: dierdre# uname -a Linux dierdre 2.6.14-2-686 #1 Mon Nov 14 14:19:05 UTC 2005 i686 GNU/Linux ~ dierdre# hdparm -d 1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#306183: kmail: KDE bug 99089 fixes InlinePGP error
Package: kmail Version: 4:3.4.2-2 Followup-For: Bug #306183 Using Sid, Kmail 1.8.2 InlinePGP selected still gets sent as PGP/MIME. http://bugs.kde.org/show_bug.cgi?id=99089 has a patch to this bug. I guess that Debian is just waiting for the change to make its way downstream. In the mean time, there is an option in Kaddressbook for receivers as to what kind of signature they prefer to receive. If InlinePGP is selected there, then InlinePGP signing works to that address. I have found that useful for mailing lists which mess up the attached signature of PGP/MIME. I am looking forward to the patch making its way through to Sid, as I find InlinePGP much more flexible and usable than PGP/MIME. Curt- [EMAIL PROTECTED] -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages kmail depends on: ii kdebase-kio-plugins 4:3.4.2-3 core I/O slaves for KDE ii kdelibs4c24:3.4.2-4 core libraries for all KDE applica ii kdepim-kio-plugins4:3.4.2-2 KDE pim I/O Slaves ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libaudio2 1.7-3 The Network Audio System (NAS). (s ii libc6 2.3.5-7GNU C Library: Shared libraries an ii libfontconfig12.3.2-1.1 generic font configuration library ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libgcc1 1:4.0.2-2 GCC support library ii libice6 6.8.2.dfsg.1-9 Inter-Client Exchange library ii libidn11 0.5.18-1 GNU libidn library, implementation ii libjpeg62 6b-10 The Independent JPEG Group's JPEG ii libkcal2b 4:3.4.2-2 KDE calendaring library ii libkdepim1a 4:3.4.2-2 KDE PIM library ii libkleopatra0a4:3.4.2-2 KDE GnuPG interface libraries ii libkmime2 4:3.4.2-2 KDE MIME interface library ii libkpimidentities14:3.4.2-2 KDE PIM user identity information ii libksieve04:3.4.2-2 KDE mail/news message filtering li ii libmimelib1c2 4:3.4.2-2 KDE mime library ii libpng12-01.2.8rel-5 PNG library - runtime ii libqt3-mt 3:3.3.5-1 Qt GUI Library (Threaded runtime v ii libsm66.8.2.dfsg.1-9 X Window System Session Management ii libstdc++64.0.2-2The GNU Standard C++ Library v3 ii libx11-6 6.8.2.dfsg.1-9 X Window System protocol client li ii libxcursor1 1.1.3-1X cursor management library ii libxext6 6.8.2.dfsg.1-9 X Window System miscellaneous exte ii libxft2 2.1.7-1FreeType-based font drawing librar ii libxi66.8.2.dfsg.1-9 X Window System Input extension li ii libxinerama1 6.8.2.dfsg.1-9 X Window System multi-head display ii libxrandr26.8.2.dfsg.1-9 X Window System Resize, Rotate and ii libxrender1 1:0.9.0-2 X Rendering Extension client libra ii libxt66.8.2.dfsg.1-9 X Toolkit Intrinsics ii perl 5.8.7-7Larry Wall's Practical Extraction ii xlibs 6.8.2.dfsg.1-9 X Window System client libraries m ii zlib1g1:1.2.3-6 compression library - runtime Versions of packages kmail recommends: ii kdebase-kio-plugins 4:3.4.2-3 core I/O slaves for KDE ii kdepim-kio-plugins4:3.4.2-2 KDE pim I/O Slaves ii procmail 3.22-11Versatile e-mail processor -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#301903: Acknowledgement (/usr/bin/growisofs: error when called to write video DVD from K3b)
I'm very sorry, the problem was a user error. I had dragged and dropped the *directory* VIDEO_TS into the K3b DVD project VIDEO_TS location, when I should have copied the individual files out of the directory instead. It is working fine now. I will now go slap myself silly so that I never do that again. My most humble apologies, please close this bugreport. No wonder no one else could repeat the problem... Curt- -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#301903: /usr/bin/growisofs: error when called to write video DVD from K3b
Package: dvd+rw-tools Version: 5.21.4.10.8-1 Severity: important File: /usr/bin/growisofs *** Please type your report below this line *** I'm running up-to-date Sid. Writing a data DVD works fine, as do video and regular CDs. The last time I successfully wrote a video DVD was in January. However, it's giving the following error now, from the K3b log: = Devices --- SONY DVD RW DW-U50A 1.5a (/dev/hdc, ) at /cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; RAW/R96R] System --- K3b Version: 0.11.20 KDE Version: 3.3.2 QT Version: 3.3.3 Kernel: 2.6.10-1-686 growisofs --- :-( write failed: Input/output error Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs=32k seek=0' growisofs comand: --- /usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=dao -dvd-compat -speed=1 = I have verified permissions on the device /dev/hdc and that there is more than several DVD's worth of hard disk space left over. I also tried running this under 2.6.8 as well as 2.6.10, same error. I note from the other bugreports that there are problems running growisofs as root, I have not tried it as root. Any suggestions gladly accepted. Curt- -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages dvd+rw-tools depends on: ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libgcc1 1:3.4.3-12 GCC support library ii libstdc++51:3.3.5-12 The GNU Standard C++ Library v3 ii mkisofs 4:2.01+01a01-2 Creates ISO-9660 CD-ROM filesystem -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
