Bonjour,
Je fais du bonding avec 2 interface reseau eth0, eth1 - bond0
Mais du coup arpwatch me spam avec des messages a cause du flip-flop de
l'adresse mac qui change dans la table arp.
J'ai cependant besoin d'arpwatch et de bond0, comment résoudre ce problème?
Georges
--
Lisez la FAQ de
Le jeudi 17 septembre 2009 à 10:04 +0200, Sil a écrit :
Merci pour ces précisions.
Je me doutait que le passage par une base de données serait nécessaire,
ça doit pouvoir ce faire sans trop de problèmes.
Par contre je ne voulait pas installer des applications à la sauvage et
garder ma
On Sun, Sep 20, 2009 at 08:53:42AM +0200, georges wrote:
Bonjour,
Je fais du bonding avec 2 interface reseau eth0, eth1 - bond0
Mais du coup arpwatch me spam avec des messages a cause du flip-flop de
l'adresse mac qui change dans la table arp.
J'ai cependant besoin d'arpwatch et de
Bonjour,
Quand je lis mais mail avec mutt, et que ceux-ci sont en html, mutt
utilise w3m (normal). Et pour certains de ces mails, les caractères
accentués etc. ne sont pas affichés.
Pour comprendre, j'ai enregistré un de ces mails sous toto.html et j'ai
essayé lynx dessus (lynx semble avoir
Pierre Allken-Bernard wrote on Sun, Sep 20, 2009 at 10:21:44PM +0200
Bonjour,
Quand je lis mais mail avec mutt, et que ceux-ci sont en html, mutt
utilise w3m (normal). Et pour certains de ces mails, les caractères
accentués etc. ne sont pas affichés.
Pour comprendre, j'ai enregistré un de
Pourquoi mutt/w3m ne sait pas m'afficher le mail correctement ?
Parce que le charset n'est pas spécifié dans l'entête du mail ou dans
l'entête de la pièce jointe ou dans la partie head du code HTML, et
que le charset par défaut que tu utilises (probablement UTF-8) n'est
pas le même. C'est
On 2009-09-20 23:31:45 +0200, Pierre Allken-Bernard wrote:
Merci. Je viens de faire un test sans l'option -assume_charset mais avec :
lynx -dump -display_charset=utf8 toto.html
et ça marche. Bizarre ?
Le lynx.cfg contient peut-être ASSUME_CHARSET:iso-8859-1 ou quelque
chose du genre.
--
El 19 de septiembre de 2009 12:52, jbc jav...@gmail.com escribió:
Una de las cosas que trae es un modem usb HSDPA, que se puede usar o
conectado al router o conectado directamente a tu debian. Este modem tiene
dos motivos, que el router dé internet en caso de que se caiga la línea
Si estas segura que el sistema funcionaba ok anteriormente, entonces
el problema es del isp, ya sea modem, router, línea o conexión. Creo
que todo lo demás hasta ahora han sido palos de ciego. Si no es así y
el isp esta ok entonces te recomiendo que re - instales y te
preocupes de hacerlo
El dom, 20-09-2009 a las 07:27 -0300, Andres Alejandro Dobie escribió:
Si estas segura que el sistema funcionaba ok anteriormente,
entonces
el problema es del isp, ya sea modem, router, línea o
conexión. Creo
que todo lo demás hasta
José Manuel (EB8CXW) wrote:
Hola a t...@s:
Tengo Debian Squeeze y Gnome.
Al realizar una actualización, me aparece que están retenidos los
siguientes paquetes:
gnome gnome-accessibility{a}gnome-core{a}
gnome-desktop-environment{a} gnome-office{a} .
Posteriormente al volver a
Sylvia Sánchez escribió:
El dom, 20-09-2009 a las 07:27 -0300, Andres Alejandro Dobie escribió:
Si estas segura que el sistema funcionaba ok anteriormente, entonces
el problema es del isp, ya sea modem, router, línea o conexión. Creo
que todo lo demás hasta ahora han sido palos
El día 20 de septiembre de 2009 01:05, Galileo Galilei
correo...@gmail.com escribió:
El sáb, 19-09-2009 a las 16:07 -0500, haldrik escribió:
El día 19 de septiembre de 2009 15:28, Cristian Mitchell
mitchell6...@gmail.com escribió:
El día 19 de septiembre de 2009 16:15, Mauricio J. Adonis C.
Sinceramente, no termino de comprender este hilo. El software privativo tiene
su nicho de mercado en Linux igual que lo tiene el software libre en MS
Windows.
De seguro habrá gente que se sienta satisfecha con usar Nero para Linux ( y
pagar por él), al igual que hay gente que prefiere usar
On Domingo 20 Septiembre 2009 17:13:17 opensou...@igalvit.es escribió:
Sinceramente, no termino de comprender este hilo. El software privativo
tiene su nicho de mercado en Linux igual que lo tiene el software libre en
MS Windows. De seguro habrá gente que se sienta satisfecha con usar Nero
El dom, 20-09-2009 a las 11:29 -0430, Juan Lavieri escribió:
Ya que no tienes acceso a un CDROM ¿no tienes un pendrive? Yo instalé
mi laptop con uno de 512MB y luego seguí con la instalación por internet.
Saludos
Juan Lavieri
Sí, tengo un pendrive. No tengo mucho espacio
El dom, 20-09-2009 a las 17:00 -0300, Facundo A escribió:
On Domingo 20 Septiembre 2009 17:13:17 opensou...@igalvit.es escribió:
Sinceramente, no termino de comprender este hilo. El software privativo
tiene su nicho de mercado en Linux igual que lo tiene el software libre en
MS
El dom, 20-09-2009 a las 18:10 -0300, Sylvia Sánchez escribió:
El dom, 20-09-2009 a las 11:29 -0430, Juan Lavieri escribió:
Ya que no tienes acceso a un CDROM ¿no tienes un pendrive? Yo instalé
mi laptop con uno de 512MB y luego seguí con la instalación por internet.
Saludos
holas
tengo un viejo servidor en woody con samba y necesito reemplazarlo con
un nuevo servidor.
pero estoy notando que cuando agrego la direccion del nuevo servidor
al dns, comienzan a presentarse problemas de validacion de dominio
contra el viejo servidor.
es esto normal?
es posible que
El sáb, 19-09-2009 a las 12:14 -0500, haldrik escribió:
El día 18 de septiembre de 2009 22:58, Juan Manuel Acuña
gps...@gmail.com escribió:
El 18/09/2009, a las 17:39, Rafael A. Isturiz L. ristu...@gusl.org.ve
escribió:
Mensaje original
De: Carlos Eduardo Sotelo Pinto
HOla...
Amigos tengo una consulta, existen sistemas que realizan cache de P2P si
alguien en su empresa tiene experiencia en estos sistemas me gustaría saber su
punto de vista.
¿Genera problemas legales? ¿mejora notablemente el rendimiento del ISP?
Saludos,
Pepo.
signature.asc
Description:
On Sun, Sep 20, 2009 at 11:31:45PM -0500, Paul Mancheno H. wrote:
Hola...
Amigos tengo una consulta, existen sistemas que realizan cache de P2P si
alguien en su empresa tiene experiencia en estos sistemas me gustaría saber
su
punto de vista.
¿Genera problemas legales? ¿mejora
Pessoal,
Gosto de usar o icedove e por isso quero remover o evolution, mas ao tentar
remové-lo, uma vários outros progamas estão sendo desinstalados também, como
podem ver abaixo:
Os seguintes pacotes foram automaticamente instalados e não são mais requeridos:
libepc-ui-1.0-1 espeak ekiga
Eu não peguei a discussão inteira, mas por que não usar o kernel-package?
baixa o source e usa o make-kpkg com algumas opções ele cria o pacote pra você
até do próprio source...
Abraços
Flamarion Jorge
--- Em sáb, 19/9/09, Rodolfo rof20...@gmail.com escreveu:
De: Rodolfo
Caio, não vi erro nenhum no erro nenhum no seu processo de compilagem do
kernel, a naum ser do mkinitramfs.
c tinha colocado mkinitramfs -o initrd.img-2.6.31 2.6.31 e o modo seria
mkinitramfs-kpkg -o initrd.img-2.6.31 2.6.31
não sei c foi que você esqueceu de colocar no seu e-mail ou c esqueceu
assdfsfsdf
Veja quais são os assuntos do momento no Yahoo! +Buscados
http://br.maisbuscados.yahoo.com
Alow galera da lista de dicussão do Debian , espero que possa ajudar como tb
ajuda-lo
abraços a todos
Marcelo
Veja quais são os assuntos do momento no Yahoo! +Buscados
http://br.maisbuscados.yahoo.com
*Atenção só tem mais 10 peças quem comprou comprou quem não comprou não
compra mais*
* *
Ola,,,
quer divulgar sua empresa ? faça como eu, use o sistema
de mala direta, aquira lista de e-mail com mais de 280 milhoes
de e-mails em dvd + programas de envio em massa, + programa extrartores
de
Boa tarde galera,
estou a procura de uma ferramenta para utilizar gráficos de verificação da
economia com o Squid.
Além disso outras coisas como: Processamento, memória e etc que o squid
usa..
Alguma dica?
abraços
Rafael
Seguindo a dica do Rafael a alguns dias atraz!
Rafael Poseddon para mim
mostrar detalhes 18 set (2 dias atrás)
Tente o comando: aptitude keep-all (como root)
2009/9/20 Adriano Carneiro de Moura adrianodemo...@yahoo.com.br
Pessoal,
Gosto de usar o icedove e por isso quero remover o
Boa tarde Rafael,
Acredito que o SquidGraph http://freshmeat.net/projects/squid-graph/e
Munin http://munin.projects.linpro.no/ irão te ajudar bastante. E tem
muita documentação na Internet.
Abrs.,
Thiago Bijani
Mobile: +55 21 7898-9032
Direct Connect: 55*82*44254
2009/9/20 Rafael Moraes
Recomendo usar o htb
Segue links úteis sobre o assunto:
http://linux-ip.net/linux-ip.pdf
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htmhttp://luxik.cdi.cz/%7Edevik/qos/htb/manual/userg.htm
Em 19-09-2009 21:47, Rodolfo escreveu:
eu faço assim:
make
make modules
make modules_install
make install
makeinitramfs -o /boot/initrd.img-2.6.31 /lib/modules/2.6.31
update-grub
Do jeito Debian, basta fazer isso:
$ fakeroot make-kpkg --initrd --revision=custom.1.0 kernel_image
Maiores
Boa noite!
Alguem conhece algum script pronto para controle de banda, preciso do
seguinte:
Controlar banda de placas aliases eth0:2 eth0:3 eth0:4 eth0:4 ou de faixas
de rede.
Estou usando debian 5.0 e o cbq/shaper não está funcionando bem com
alises.
quero dar 2 mbps para a eth0:2 e 2
On Thu, Sep 17, 2009 at 11:27:35PM EDT, Chris Jones wrote:
What I’m seeing is that my usual font was changed everywhere on the page
except for the keywords entered in step 3. above.
Same behavior with Firefox 3.5.
Anyone seeing this with Opera, Konqueror, Dillo, IE..?
CJ
--
To
also sprach Jack Schneider p...@dp-indexing.com [2009.09.20.0044 +0200]:
I get to the Give root password for maintenance etc. place and when I
do it will not allow me to find any logs. I can run dmesg which looks
normal. Anything that that tries to use /var -locks. etc. fails, so
it's unable
Jack Schneider wrote:
Hi, All
Somewhere (about 9/15) in my enthusiasm for Debian, Testing up2date
kernel 2.6.30-1-amd64,--updating I said (y) where I should have said
(q). My system will not boot correctly. It halts with: fsck died with
exit status 8
I have 4 disks, 2 in raid1, ie. 2
Hiya
Would anyone know how to keep a packages daemon from adding to rc.d etc,
on upgrade, thats after I ran update.rcd package remove.
Im using heartbeat with LVS (ldirector). For my setup, a while ago, I
did an update.rcd ldirector remove, but when a release from debian
stable was
On Sun,20.Sep.09, 10:23:07, Brent Clark wrote:
Hiya
Would anyone know how to keep a packages daemon from adding to rc.d
etc, on upgrade, thats after I ran update.rcd package remove.
Im using heartbeat with LVS (ldirector). For my setup, a while ago,
I did an update.rcd ldirector remove,
Original Message
Subject:Re: Alsa Problem or Audacity Problem?
Resent-Date:Sat, 19 Sep 2009 23:58:38 + (UTC)
Resent-From:debian-user@lists.debian.org
Date: Sat, 19 Sep 2009 19:57:58 -0400
From: Thomas H. George li...@tomgeorge.info
To:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thomas H. George wrote:
soundcard. From you comment below I understand that the sound card is using
the input from all these sources simaltaneously and so the ones not
needed must be muted.
The more complex soundcards may have an internal switch
Original Message
Subject:Re: Alsa Problem or Audacity Problem?
Resent-Date:Sat, 19 Sep 2009 23:58:38 + (UTC)
Resent-From:debian-user@lists.debian.org
Date: Sat, 19 Sep 2009 19:57:58 -0400
From: Thomas H. George li...@tomgeorge.info
To:
Dear all
Even more sound trouble. On my system ALSA seems unable to (re-)store
the audio levels for Master. All other levels and switches are
stored and restored as expected, but on start-up Master is always
muted and at 0%.
I tried to work around and set Xfce to run aumix -v60 in terminal at
I started getting this error recently, and I'm not sure why. I found this
reference to a kernel error, but it says unstable/testing, and it is rather
OLD..:
https://lists.linux-foundation.org/pipermail/bugme-new/2004-December/011652.html
and these messages were in a terminal window I had up:
Dear debian-user
I would like to build a reciprocal website link between www.acopart.org and
www.archivum.info. I believe that the content in both websites would be of
great interest to visitors and this could result in increased web traffic and
improvement in google page rankings for both
On Sun, 20 Sep 2009 08:37:51 +0200
martin f krafft madd...@debian.org wrote:
also sprach Jack Schneider p...@dp-indexing.com [2009.09.20.0044
+0200]:
I get to the Give root password for maintenance etc. place and
when I do it will not allow me to find any logs. I can run dmesg
which
Dear all.
I've been trying to serve a ppp0 internet
connection through a wireless network. I made a
small script to be ran when i want to do that:
ifdown wlan0
iwconfig wlan0 essid VinaNET mode Ad-Hoc
ifconfig wlan0 192.168.0.254
echo 1 /proc/sys/net/ipv4/ip_forward
/etc/init.d/dnsmasq stop
Oh Sorry... I forgot to mention an important info.
Here's my dnsmasq.conf file:
domain-needed
bogus-priv
interface=wlan0
dhcp-range=192.168.0.1,192.169.0.100,12h
Thanks again.
--
Vinícius André Massuchetto
http://vinicius.soylocoporti.org.br
Vinícius Massuchetto escreveu:
Dear all.
I've
I'm to get skype working with my bluetooth headset
I managed to get it paired using blueman-applet and even get audio on it from
mplayer using:
player -ao alsa:device=bluetooth ~/Music/When\ I\ Grow\ Up.flac
I setup a .asoundrc file containing:
pcm.bluetooth {
type plug
slave {
On Sat, 19 Sep 2009 18:04:40 +1200
sam blackmore sig...@greenpeace.org.nz wrote:
Yup this is a mail bomb - sign on with Greenpeace to help stop
climate change. You'll win a planet!
I've just Signed On with thousands of other Kiwis calling for urgent
action on climate change and I think you
On 22.07.09 14:31, Dominique Dumont wrote:
My Gygabyte motherboard (SB700 with AMD4400+) has poor SATA
performance. Any disk I/O leads to high system CPU percentage.
And the AHCI interrupt is about 1000/s even for low disk usage.
Using hdparm, I've found that all my sata disks have
On Sun,20.Sep.09, 12:05:17, Liviu Andronic wrote:
Dear all
Even more sound trouble. On my system ALSA seems unable to (re-)store
the audio levels for Master. All other levels and switches are
stored and restored as expected, but on start-up Master is always
muted and at 0%.
Do 'alsactl
On Sun,20.Sep.09, 09:24:06, Chris wrote:
[snip everything]
1. Please do not respond to spam
2. If you do feel an uncontrollable urge to talk about a spam message at
least do not quote it (not even partially)
3. Your message is offtopic on debian-user, the list in my .sig would
have been more
On Sun,20.Sep.09, 18:27:01, Andrei Popescu wrote:
3. Your message is offtopic on debian-user, the list in my .sig would
have been more appropiate (Reply-To set accordingly).
...now it is.
Regards,
Andrei
--
Offtopic discussions among Debian users and developers:
On Sat, 19 Sep 2009, Justin Piszcz wrote:
On Sat, 19 Sep 2009, Justin Piszcz wrote:
On Sat, 19 Sep 2009, Justin Piszcz wrote:
On Sat, 19 Sep 2009, Justin Piszcz wrote:
On Sat, 19 Sep 2009, Justin Piszcz wrote:
On Sat, 19 Sep 2009, Justin Piszcz wrote:
Solution for now as I
On Sun, Sep 20, 2009 at 10:24 AM, Chris rac...@makeworld.com wrote:
On Sat, 19 Sep 2009 18:04:40 +1200
sam blackmore sig...@greenpeace.org.nz wrote:
Yup this is a mail bomb - sign on with Greenpeace to help stop
climate change. You'll win a planet!
...
You can't stop cyclical stages
Hi,
I downloaded apt_0.6.46.4-0.1+etch1.tar.gz and decompress it. Then I
run ./configure and make. But I get the following error. Could
somebody let me know how to fix the problem?
Regards,
Peng
Compiling contrib/mmap.cc to
On 2009-09-20 18:40 +0200, Peng Yu wrote:
I downloaded apt_0.6.46.4-0.1+etch1.tar.gz and decompress it. Then I
run ./configure and make.
Out of curiosity, why are you doing that? Apparently you don't use
etch, because...
Compiling contrib/mmap.cc to
On Sun, 20 Sep 2009 18:29:53 +0300
Andrei Popescu andreimpope...@gmail.com wrote:
On Sun,20.Sep.09, 18:27:01, Andrei Popescu wrote:
3. Your message is offtopic on debian-user, the list in my .sig
would have been more appropiate (Reply-To set accordingly).
...now it is.
Regards,
On Sun, Sep 20, 2009 at 10:23:07AM +0200, Brent Clark wrote:
Hiya
Would anyone know how to keep a packages daemon from adding to rc.d
etc, on upgrade, thats after I ran update.rcd package remove.
Im using heartbeat with LVS (ldirector). For my setup, a while ago,
I did an update.rcd
List,
Is there support for the Maxtor Onetouch4 Plus 1TB external drive in
Debian 5.0 release? If not, are there 1TB external drives that are
supported and is there a plan to support the Maxtor drive in some future
releases?
gmoore
--
To UNSUBSCRIBE, email to
Dr. George E. Moore wrote:
List,
Is there support for the Maxtor Onetouch4 Plus 1TB external drive in
Debian 5.0 release? If not, are there 1TB external drives that are
supported and is there a plan to support the Maxtor drive in some future
releases?
Unless this drive behaves in some
On Sun, Sep 20, 2009 at 12:58 PM, Dr. George E. Moore
gmoore...@gmail.com wrote:
List,
Is there support for the Maxtor Onetouch4 Plus 1TB external drive in
Debian 5.0 release? If not, are there 1TB external drives that are
supported and is there a plan to support the Maxtor drive in some
On 9/20/09, Andrei Popescu andreimpope...@gmail.com wrote:
Do 'alsactl store' and 'alsactl restore' work for root? Do you have the
package alsa-utils installed?
Yes, both work as expected: storing and restoring the correct levels.
Also, alsa-utils 1.0.20-3 is installed.
Liviu
--
To
Justin Piszcz wrote:
Solution for now as I need a working desktop:
1. Recover OS from backup before upgrade:
2. Pin kde* and xorg* so they are not upgraded anymore.
In the future/if someone from xorg can respond-- is there a fix/way to
make the semantics such that 'xset m 20/5 1' is the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dr. George E. Moore wrote:
List,
Is there support for the Maxtor Onetouch4 Plus 1TB external drive in
Debian 5.0 release? If not, are there 1TB external drives that are
I can't see the ums-onetouch module within the 2.6.26 kernel (current
5.0
On 2009-09-20 20:29 +0200, Eduardo M KALINOWSKI wrote:
Is there support for the Maxtor Onetouch4 Plus 1TB external drive in
Debian 5.0 release? If not, are there 1TB external drives that are
supported and is there a plan to support the Maxtor drive in some future
releases?
Unless this
On Sun,20.Sep.09, 19:40:54, Liviu Andronic wrote:
On 9/20/09, Andrei Popescu andreimpope...@gmail.com wrote:
Do 'alsactl store' and 'alsactl restore' work for root? Do you have the
package alsa-utils installed?
Yes, both work as expected: storing and restoring the correct levels.
Also,
On Sat, Sep 19, 2009 at 05:03:17PM +, jonathan godoy wrote:
hola necesito ayda urgente.. acabo de instalar debiaan 5 pero
tambien tenia instalado ubuntu 9.4 con ext4 y no me aparece en el
grub!! como hago para que salga en la lista? ahora de plano no me
agrado debian.. ni la tarjeta
2009/9/19 jonathan godoy wildwil...@hotmail.com:
hola necesito ayda urgente.. acabo de instalar debiaan 5 pero tambien tenia
instalado ubuntu 9.4 con ext4 y no me aparece en el grub!! como hago para
que salga en la lista? ahora de plano no me agrado debian.. ni la tarjeta
inalambrica me
Liviu Andronic wrote:
On 9/17/09, Liviu Andronic landronim...@gmail.com wrote:
an issue that I also encountered in 2.6.26. Although I have sound in
hte computer speaker, I have none in the headphones. When I plug the
headphones (or external speakers), the computer speakers are not
muted,
T o n g wrote:
Thanks for your feedback, Emanoil. Could you elaborate more? unison
looks promising to me, and I've just learned that there are no ocaml
runtime dependency for it on i386, amd64. So usability is the most
important issue to me now. Anyone has positive experience with unison?
Wayne Topa wrote:
Thanks for the tip! This ^C really bothered me as I copy-paste from
terminals very often!
The question is, how do you make this change permanent? I manned stty
and nothing is mentioned, I straced it and could not find where it makes
its changes, so how do I make it
On 9/20/09, Andrei Popescu andreimpope...@gmail.com wrote:
Is the script /etc/init.d/alsa-utils run on reboot? As far as I can tell
you should see a Setting up ALSA message at boot.
I don't know why the messages are garbled, but this is what I get
ALSA-related in /var/log/boot:
Sun Sep 20
On 9/20/09, Emanoil Kotsev delop...@yahoo.com wrote:
nothing is wrong - you may have many input/outputs. you have to figure out
which controls are for the headphones. Unfortunately it depends on your
card. Mostprobably you have to assign the correct output to your
application.
In
On Sat, Sep 19, 2009 at 3:50 AM, Israel Garcia igalva...@gmail.com wrote:
netstat output:
server:~# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address
State PID/Program name
tcp 0 0 *:mysql
I have googled the problem but can't make head nor tail of the solutions.
During today's update on my testing machine I was asked whether I wanted to
update to grub2. I said OK - after the re boot I picked the chain option. The
boot went well, so I ran the update-from-grub-legacy script. Now I am
Frank beacon at videotron.ca writes:
I have googled the problem but can't make head nor tail of the solutions.
During today's update on my testing machine I was asked whether I wanted to
update to grub2. I said OK - after the re boot I picked the chain option. The
boot went well, so I ran
Liviu Andronic wrote:
On 9/20/09, Emanoil Kotsev delop...@yahoo.com wrote:
nothing is wrong - you may have many input/outputs. you have to figure
out
which controls are for the headphones. Unfortunately it depends on your
card. Mostprobably you have to assign the correct output to your
On Fri, Sep 18, 2009 at 1:48 AM, A.A. a...@email.it wrote:
Hi,
I have installed debian sid and zhone on my freerunner gta02.
When I run zhone it result:
Traceback (most recent call last):
File /usr/bin/zhone, line 74, in ?
import cairo
ImportError: No module named cairo
what's the
Emanoil Kotsev wrote:
In the mixer (both alsa and xfce) I have only one Headphones volume
control. Probably irrelevant, I also have IEC958 switches and
IEC958 Playback Source options; no idea what these are for.
IEC958 is optical/digital in/out as far as i know, you probably don't use
it.
I have googled the problem but can't make head nor tail of the solutions.
During today's update on my testing machine I was asked whether I wanted to
update to grub2. I said OK - after the re boot I picked the chain option. The
boot went well, so I ran the update-from-grub-legacy script. Now I am
Frank beacon at videotron.ca writes:
I have googled the problem but can't make head nor tail of the
solutions.
During today's update on my testing machine I was asked whether I wanted
to
update to grub2. I said OK - after the re boot I picked the chain
option. The
boot went well, so I
aries...@clearmail.com.au wrote:
Frank beacon at videotron.ca writes:
I have googled the problem but can't make head nor tail of the
solutions.
During today's update on my testing machine I was asked whether I wanted
to
update to grub2. I said OK - after the re boot I picked the chain
On Fri, Sep 18, 2009 at 09:34:12AM +0200, Frank Bonnet wrote:
Hello
I'm trying to change a local user passwd as root and I get this error
message ... which seems a bit unreal to me ...
passwd: Permission denied
passwd: password unchanged
The machine is running Lenny 64 bits
Two
How do I ensure xdm only starts after /etc/rc.local is finished?
What do I need to put into
/etc/init.d/rc.local's
INIT INFO section?
Can I put it there or must I put it into /etc/init.d/xdm's?
I read insserv(8) but it is mishmosh to me.
--
To UNSUBSCRIBE, email to
On Sun,20.Sep.09, 22:34:23, Frank McCormick wrote:
[snip grub2 troubles]
As far as I understand you fixed your problem by going back to grub1.
I also don't see any reference in it to the Ubuntu which I have on
hda3. Debian testing is on hda2.
For the archives, to boot other OSes on your
87 matches
Mail list logo
