/aacraid.html
Regards,
Kevin Traas
Chief Information Officer
Merilus Technologies, Inc. .:|| Thinking inside the box ||:.
Oh, and I forgot to mention
I'm not subscribed to either of these mailing lists, so please be sure to
reply privately with any comments, questions, etc.
Regards,
Kevin
- Original Message -
From: Kevin Traas [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; debian-user@lists.debian.org
Sent
the following parameter to the
kernel:
ramdisk_size=16384
The number is KB, so the value above is 16MB.
Hope this helps!
Later,
Kevin Traas
http://www.netmaster.com
to the original text
mode? (Without having to reboot.)
TIA for any help you can provide.
--
Regards,
Kevin Traas
into, say, 640x480?
Can I use fbset for this? Is it possible?
Regards,
Kevin
Eric G . Miller wrote:
On Wed, Apr 05, 2000 at 04:36:03AM +, Kevin Traas wrote:
Hello everyone,
No response on this yet, so I'll post again. Please let me know if you
can help.
You'll need fbset to do
seems to be capable of setting to other graphical modes (i.e.
higher/lower resolutions).
How do I get out of the graphical mode and return to the original text
mode? (Without having to reboot.)
TIA for any help you can provide.
--
Regards,
Kevin Traas
I've got a system here that I've been building from scratch - just to
***learn*** how Debian / Linux works from the ground up (right from
building my own boot disk - initrd, etc.). I've got everything working
great; however Hitting CTRL-C does not kill a running process.
The
rolled my own init, btw.) And, why might Job
Control be disabled?
TIA for your help/comments.
Regards,
Kevin Traas
Can anyone point me to an RTFM page ;-) on how to disable the
auto-blanking feature? This is a cmd-line system only, no X.
I'm assuming it's a kernel parameter somewhere
TIA,
Kevin
Hey, Linus Torvalds isn't even in the top 20! Let's change that! ;-)
Time Magazine is allowing us to vote for Time Magazines
Person of the Century, which will be in their December 1999 issue.
To vote go to:
http://www.pathfinder.com/time/time100/toppersonmain.html
Later,
Kevin
Kevin
I want to connect an external ISDN
to my system using the MB's standard serial ports. However, everything's
telling me I can only push 115K through these serial ports - far less than the
theoretical max of an ISDN TA that does V.42bis.
Any comments/suggestions on
overclocking ;-) built-in
I want to connect an external ISDN to my system using the MB's standard
serial ports. However, everything's telling me I can only push 115K through
these serial ports - far less than the theoretical max of an ISDN TA that
does V.42bis.
Any comments/suggestions on overclocking ;-) built-in
Patakidis [EMAIL PROTECTED]To: Kevin
Traas [EMAIL PROTECTED]Cc:
debian-user@lists.debian.org
debian-user@lists.debian.orgDate:
Tuesday, February 23, 1999 8:17 PMSubject: Re: Std. Serial
ports beyond 115K?Hi there Kevin :)The best way to
get the most bang for your ISDN buck
Is there anyone using this modem under Linux? This is their
2-modems-on-one-card product and I'm interested in channel bonding and
saving some slots
If you have any experience with this card under Linux, I'd really appreciate
any comments you can give. Supra Tech Support has not been too
Yeah I know this is old, but... I need smbfs for a system I'm working on
here If you know where this might be located, please let me know. I'd
be grateful.
Regards,
Kevin Traas
Kevin Traas.vcf
Description: Binary data
Can anyone tell me whether the 'tulip' driver supports the 21143 chipset?
My card supplier (Kingston) has just switched from the 21140 to the 21143
and I've no idea what problems this might cause - if any.
Regards,
Kevin Traas
Kevin Traas.vcf
Description: Binary data
this helps!
Later,
Kevin Traas
Kevin Traas.vcf
Description: Binary data
. multi-port modems?
Thanks for any help you can provide.
Regards,
Kevin Traas
Does anyone know if this modem works under Linux?
Diamond's web site lists Win9x as requirement Is this WinModem crap or
otherwise?
If you have any experience with this board, your comments would be much
appreciated.
Thanks in advance,
Kevin
Oh, and. Happy Holidays!
I'm looking for a software utility to mirror my Linux hd on a second hd ?
I've two 4.2 Go IDE HDs. The first one contain the linux root partition,
a second partition for data and the swap partition. The second is free to
use for backup.
Simply use dd `man dd' for more info.
Basically,
Hi everyone. I'm trying to install Debian on a Toshiba 330CDT laptop. I
have several years Unix use, but I've never tried to install Linux before.
I'm installing from CD, but I can't even get past the first page. I get
the following:
boot:
Loading root.bin13.
Loading
Check out the following:
http://www.thesitefights.com/wepatrol/mil_bug.gif
Regards,
Kevin
The idea that Bill Gates has appeared
like a knight in shining armor tolead all customers out of a mire of
technological chaos neatly ignoresthe fact that it was he, who by peddling
second-rate
This is the second time I am posting this message, since I find it
really hard to believe that no one in this list was able to suggest a
solution. I will be really thankful if someone can help me with this
question:
I'm not sure how you missed this because it's been an oft repeated
question
Thanks for the reply Sorry for the delay in response here, but
I've been _very_ busy... Well, I have Adaptec Easy CD Pro which can
write ISO image files to CD, but I thought _that_ wouldn't work
either because it doesn't support the Rock Ridge Extensions (read
from a previous post to
So, we're a few hours away from *two* weeks since hamm was officially
released as Debian 2.0.
**HOWEVER**, nonus.debian.org still has stable pointed to bo and
hamm identified as frozen.
Any ideas on when this will be updated?
Also, incoming-non-US is pretty full of stuff, too Will
| So, we're a few hours away from *two* weeks since hamm was officially
| released as Debian 2.0.
|
| **HOWEVER**, nonus.debian.org still has stable pointed to bo and
| hamm identified as frozen.
|
| Any ideas on when this will be updated?
Huh? Where are you looking?
Same server, but in
Dinesh, Adaptec DirectCD will not write images. You'll most likely need to
get a commercial package such as Adaptec CD Creator Deluxe. (It's what I
use to burn the images I create using mkisofs on my Linux box.)
Regards,
Kevin Traas
-Original Message-
From: Dinesh Nadarajah [EMAIL
with a
Winbloze box, anyways)
Regards,
Kevin Traas
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
, nothing shows up on-screen.
Any ideas? Any words-of-wisdom? Pointers to tfm are welcome.
Regards,
Kevin Traas
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
your
mirror. (Not nearly as easy as it sounds.)
By far your best option is to download the ISO images.
Regards,
Kevin Traas
-Original Message-
From: Curt E. Spann [EMAIL PROTECTED]
To: debian-user@lists.debian.org debian-user@lists.debian.org
Date: Thursday, July 23, 1998 5
out the following PC Week article:
http://www.zdnet.com/pcweek/news/0720/20morac.html
Regards,
Kevin Traas
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
I downloaded hamm at work and burned it on CD.
When I can home, and mounted the CD-ROM drive as iso9660, all the files
that are longer than 8 characters, ends with ~1.
I tried mounting the drive again as vfat (with or without -o loop) but it
said that it was not a block device.
Is there a way to
,
Kevin Traas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
be setuid root. Make sure that it is.
Kevin Traas wrote:
I've just installed a new box running Debian 2.0 (hamm) and I'm having a
slight problem. I can't get it working properly on the network (this is
my fourth hamm install and all others are fine...).
For some reason, packets
, pretty login screen, and to top it off xdm will run the server with
authentication turned on. All in all it's the way to go. I'd be happy to help
you
get it configured.
Kevin Traas wrote:
I'm fairly new to X, so this might be an RTFM question. If so, please
point me to where I can find
when running as
root - however, I'd rather not
If you have any ideas, please let me know.
Thanks,
Kevin Traas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
. No IP Masq, etc. `dmesg' doesn't show any problems.
Neither do syslog, messages, etc.
Any ideas?
Regards,
Kevin Traas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I installed Netscape 4.05 by downloading the tarball off the 'Net and then
manually installing it. No problems there I've done this many times
before without any problems. Only differences are:
1. This is a fresh frozen install. (Yesterday's updates)
2. This is my first install of
Last night, I too verified that the Hamm Tecra disks are *not* working as
advertised This includes both the April 11 and April 26 (just made
available on Monday) versions
I've got a Tecra 740.
Bo disks worked fine.
I finally got an install going by downloading base_20.tgz and other
Anyway, install went okay, but when trying to start Netscape, I get the
error mentioned in the subject line and Netscape dies
You could do:
export LD_LIBRARY_PATH=/usr/X11R6/lib:$LD_LIBRARY_PATH
Or, what you really should do is configure you dynamic linker properly.
Insert the line
turning to
you.
Anyway, I'm in Canada, so I need North American support. Oh, and don't
want an external device - for reasons that I won't bore you with.
Any ideas/pointers/help you can provide would be much appreciated.
Later,
Kevin Traas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
the message as being in HTML format. (Just sending HTML code as the body
of the message doesn't work - I've tried)
Thanks for any help you can provide.
Later,
Kevin Traas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sat, 2 May 1998, George Bonser wrote:
On Sat, 2 May 1998, Kevin Traas wrote:
How do I send an e-mail message with the new/custom header that defines
the message as being in HTML format. (Just sending HTML code as the body
of the message doesn't work - I've tried)
Thanks
vi? grin
Later,
Kevin
-Original Message-
From: Tristan Day [EMAIL PROTECTED]
To: Debianlist debian-user@lists.debian.org
Date: Wednesday, April 29, 1998 4:13 AM
Subject: Alternative to MS Frontpage web design?
I'm not pleased. Not at all. I've used MS Frontpage 97 on WindowsNT for
From freshmeat page:
--
freshmeat RPM repository
As you might already know, freshmeat tries to keep up with
the latest software releases and builds RPM packages for
them. All this work is done by Obituary, feel free to mail him
questions or comments. A change invented with the move
run successfully and diald would start pppd.
However, right at this point, pppd would die with only an exit - rather
than the usual, which is ppp1
I've tried connecting to my ISP using Minicom, CTRL-A, Q, Y, and then
manually starting pppd and that works okay.
Any ideas?
Regards,
Kevin Traas
-boots
Debian 1.3.x and Win95 (but I don't inhale!... grin my work requires
it)
Good luck!
Regards,
Kevin Traas
-Original Message-
From: Dave Caswell [EMAIL PROTECTED]
To: debian-user@lists.debian.org debian-user@lists.debian.org
Date: Tuesday, March 24, 1998 5:16 PM
Subject: Reboot
to use Win95)
Regards,
Kevin Traas
-Original Message-
From: Jens B. Jorgensen [EMAIL PROTECTED]
To: Linux admin at alv [EMAIL PROTECTED]
Cc: debian-user debian-user@lists.debian.org
Date: Wednesday, March 25, 1998 10:27 AM
Subject: Re: Win95 as a terminal
Win95 supports a Direct Cable
the problem by adding the ip and *any* hostname to /etc/hosts
on the box you're connecting to. This wil allow the IP to be resolved (even
if wrongly...). (This solution won't for my situation - thus my
headline/cry-for-help above)
Later,
Kevin Traas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
.
If you have any suggestions or clues or know of any docs, faqs, howtos that
might help me out, please let me know.
Much appreciated.
Kevin Traas
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED] .
I upgraded afterstep to 1.4, but I had to downgrade it back to 1.0,
cuz the new one did not get any of my old confs, and looked horrible!
Did I do anything wrong?
Yeah, you didn't configure it to your own tastes!Give it another try!
The conf files and structure have totally changed between
,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
. are all configured as expected.
Any other suggestions?
Regards,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
not using RAS instead?
My thoughts are because it only runs on NT and Microsoft made it...
grin... but the people on my end aren't seeing these as good reasons
TIA,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail
will determine whether 1) above
works...)
Thanks for any help/comments/info you can provide.
Regards,
Kevin Traas
Technical Consultant
Baan Business Systems
http://www.baan-bbs.ca
gifnRaHarfCjI.gif
Description: GIF image
still got the old kernel available).
Any help/hints you can provide would be much appreciated.
Regards,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I have a fairly urgent need for load balancing two modems, but eql just
does not work for me. All the bits are in place but all traffic goes
via
ppp1.
You must make sure that the hardware at the other end of the connection
will also support load balancing (i.e. it must be a linux box, a
I have a 486/66 8M with 4 ne2k clones in it. What does the bridging code
get me? Every machine on each of the subnets can see every other machine
right now with just the basic routing table? Is it a performance issue?
Bridging provides you with a bunch of options and features
1. Allows you
Help!!! My system went down this morning and coming back up, I'm getting
the following on my console, syslog, kern.log, debug, and messages file.
It's filling up my logs, filling my drives, and creating all kinds of
havoc. I haven't modified my kernel in any way and what shows below is
all I'm
Can anyone point me to docs/info on the /proc directory. Specifically,
I'm looking at content format, field descriptions, etc.
Thanks,
Kevin
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
to get the stats as part of a guarantee
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
QUESTION: Is their a generic ip addressing scheme that should be used
within this company , since it is not connected in any way to the net.
Does it even matter? I guess I could use any address I want ...
There's an RFC on this, but I can't quote the number at the moment
This RFC defines the
and Data
OSI layers. Protocols work above that in the Network (IP) and Transport
(TCP) layers
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
post and see if anyone had any comments
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
for months. They say nothing's
changed.
Any ideas?
TIA,
Kevin Traas
, and axionet.com is *not* their DN.
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
If you've got a suggestion, I'd love to hear it.
Okay, first suggestion is to turn off rich text or HTML email in your mail
client. Email does NOT have pretty colors or centering and I usually just
delete any message I see which looks like a webpage.
Yeah, apologies to everyone about that
mail.dn in
/etc/hosts. Now, no more log entries
Can anyone tell me why qpopper couldn't resolve the mail.dn name via DNS
and requires an entry in /etc/hosts? Design limitation?
Regards,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED
I started it.. grin
Later,
Kevin Traas
-Original Message-
From: Scott Ellis [EMAIL PROTECTED]
To: Tommy Lakofski [EMAIL PROTECTED]
Cc: Kevin Traas [EMAIL PROTECTED]; Debian
debian-user@lists.debian.org
Date: Tuesday, December 02, 1997 10:04 PM
Subject: Re: DNS Problem
On Tue, 2 Dec
Does anybody know of any reliable mirorrs? .
I use exclusively ftp.cdrom.com or sunsite.unc.edu.
Either of them always have very reasonable rates - and I'm on T1.
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble
I haven't been able to reach http://ipmasq.home.ml.org today at all - and,
of course, the list of mirrors is on that site as well So much for fault
tolerance
Anyone know of an available mirror of this site?
Thanks,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
Another option for Linux is Squid:
http://squid.nlanr.net/Squid/FAQ/FAQ.html
Later,
Kevin
Isn't there some kind of cache software, though? I don't know what
it's called, but it caches webpages locally, and won't querry the
remote server unless the page isn't in the cache? What is it
Where is the original article??
Someone posted to a NewsGroup about 2 weeks ago. Not sure which one
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
/Security/Linux-Security-FAQ/CFS-Doc.html
There's also: http://edu-gw.dia.unisa.it/tcfs/ The Transparent
CryptoGraphic File System
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Can anyone recommend an Ultra SCSI controller that works under Linux?
I'm looking to hang several of the new 18GB Barracuda/Cheetah Seagate drives
off of one...
I'm currently looking at the BusLogic Flashpoint BT-950.
Is anyone using this card? Any comments?
TIA,
Kevin Traas
I should also ask about the Mylex DAC960PD. Or, are there any other
Ultra-SCSI RAID controllers supported in Linux?
Can anyone recommend an Ultra SCSI controller that works under Linux?
I'm looking to hang several of the new 18GB Barracuda/Cheetah Seagate
drives
off of one...
I'm currently
Have you looked at the software RAID? Is it more flexible because you
can run it with hard disks with different geometry.
!!! ??? I've never heard of this under Linux?
Can anyone provide more info?
Regards,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe
the CMOS out. Then, just re-autodetect
everything and you're set to go.
Short of encrypting the filesystem itself, I have yet to find a way to
secure things under Linux But if anyone has any ideas, I'd be *more*
than glad to hear them
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING
I'm trying to compile land.c (as in the exploit) ...
Why you need to compile this program?
BTW, linux is NOT vulnerable to this attack. Even version 1.2.13.
Kudos to Linux!!!
Makes me proud!
Later,
Kevin
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
I'm trying to compile land.c (as in the exploit) ...
Why you need to compile this program?
BTW, linux is NOT vulnerable to this attack. Even version 1.2.13.
Kudos to Linux!!!
Makes me proud to be a Linux user/supporter
Later,
Kevin
--
TO UNSUBSCRIBE FROM THIS MAILING LIST:
this or does the speed have to
be set manually in a config file somewhere?
If this chipset/driver can't do it, do you know of one that can?
Regards,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Of course anyone can also just delete the whole partition and destory
everything.. but usually isn't as useful.
When deciding to encrypt the filesystem, the above is the *very* least of
your worries.The whole point of encrypting it is to keep it's contents
secret. Nuking the partition is a
for
a quick/lazy answer grin
TIA,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
If I remember (off the top) correctly, lseek() is/was the limiting factor on
filesystem sizes... At one time, this was 32bit, so max addressable
filesystem size was 2GB.
Has this changed? i.e. what is the max ext2 filesystem size?
Regards,
Kevin
--
TO UNSUBSCRIBE FROM THIS MAILING LIST:
...).
Well, I've got a Tecra 510, but I haven't found an XServer other than VGA
that works with the video in this thing So, X isn't much of an
option
Unless anyone else can help - I'd be much appreciative! (Chipset is
CL65550.)
Regards,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST
to replace it with! Long live Linux!
Regards,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
percentages
Caldera 9 2%
Debian 245 42%
RedHat 223 38%
Slackware 93 16%
Other 9 2%
Total number of votes 579
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
, DialD drops the link (to save you money... grin...). It's really
slick and many people use it.
As for an X config for PPP, I've never used it (I'm shell-prompt driven...),
but you're probably looking for XISP.
Both XISP and DialD are Debian packages
Good Luck!
Kevin Traas
--
TO UNSUBSCRIBE
Basically, I'm considering rebuilding the kernel to add in some things
I'm missing (sound) and removing some things that I don't need (SCSI
support, for one).
Good call !
I've read all the howtos and got all the files, so I'm pretty sure I
have a good idea of how to do it (but I'm open to
At http://www.slashdot.org/, there is a poll of favorite linux
distributions. I encourage you all to go vote for debian, which
is currently trailing redhat by about 50 votes.
Has anyone advertized this on whatever Redhat (and the other
distributions) have as user lists? While it might be
You might want to look into DialD (Dial-on-Demand). This package
automatically makes and breaks connections to the Internet as needed.
You
just start up NetScape, etc. and the modem dials... After an inactivity
timeout, DialD drops the link (to save you money... grin...). It's
really
slick
You're asking this on a *Debian* Linux mailing list? Sorry, buddy, but
there aren't too many people here that are going to be able to help you
out I've never used RedHat.
You're going to want to check out http://www.redhat.com for RedHat support.
They've got mailing lists too - and you'll
?
What error messages (if any) are displayed when you run dmesg?
If you have all configs setup properly, then it might be an IRQ or I/O
conflict, but you haven't provided enough info... yet.
Give us what dmesg outputs and we'll go from there.
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING
and FvwmButtons...and I must be doing somehting
Sorry, can't answer this one... I've never used X. ***Long live the Shell
Prompt*** grin
Later,
Kevin Traas
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
/path/to/ircd
/path/to/eggdrop
---snip here
Just a few additional comments:
- make sure the #!/bin/sh is the *first* line in the file.
- adjust the path entries as required... obviously.
- chmod 755 /etc/rc.boot/irc-startup to make it executable
Good luck,
Kevin Traas
I've got a friend that I'm trying to support over the phone He's
getting the above error when trying to run pon. I've gone through all the
obvious things, but have had no success.
Does anyone have any ideas?
- Running lsmod showed ppp loaded.
- Rebuilding kernel with static ppp support
I just heard on BugTraq that there's now a bugfix available for Linux
Anyone heard of it or where it might be obtained?
For those that are wondering what I'm talking about
http://support.intel.com/support/processors/pentium/ppiie/index.htm
Regards,
Kevin TraasBaan
Can anyone make any recommendations for K56Flex modems (preferably external)
that work well under Linux?
I'm looking to possibly configure two using EQL to get roughly 100Kbps
performance from my ISP.
TIA,
Kevin TraasBaan Business Systems
Systems AnalystLangley
Can anyone make any recommendations for K56Flex modems (preferably
external) that work well under Linux?
This isn't a Linux issue. Any modem, whether K56Flex or x2 will work under
Linux.
Sorry, but I beg to differ
Winmodem products are really a PITA in Linux - unless something's changed
1 - 100 of 264 matches
Mail list logo
