On Fri 04 Dec 2020 at 07:20:19 +1100, David wrote:
[...]
> I think this is an area that possibly needs some investigation or
> improvement. I would like to know how this ISO search is being done
> and what is the reason for the failure (and why can't I just specify
> the ISO I want to use, no
Hi Peter,
Replies below ...
On Fri, 4 Dec 2020 at 03:39, wrote:
> From: David Date: Thu, 3 Dec 2020 09:27:45 +1100
> > These are different to the ones inside the iso ...
> Thanks. My assumption of no difference was/is lethal. Any chance of
> mentioning the distinction in the instructions?
On Thu 03 Dec 2020 at 08:22:52 -0800, pe...@easthope.ca wrote:
> From: David
> Date: Thu, 3 Dec 2020 09:27:45 +1100
> > Per the "paragraph 3" I mentioned previously and quoted at the top
> > of this message, the required vmlinuz and initrd.gz for (current, stable,
> > i386)
> > can be
From: David
Date: Thu, 3 Dec 2020 09:27:45 +1100
> Per the "paragraph 3" I mentioned previously and quoted at the top
> of this message, the required vmlinuz and initrd.gz for (current, stable,
> i386)
> can be downloaded from:
>
On Mi, 02 dec 20, 12:10:33, pe...@easthope.ca wrote:
> > > https://www.debian.org/releases/stable/i386/ch05s01.en.html#boot-initrd
> >
> > Quoting paragraphs 2 and 3 from your link above ...
> >
> > Alternatively, if you intend to keep an existing partition on the hard
> > drive unchanged during
On Thu, 3 Dec 2020 at 07:54, wrote:
> > > https://www.debian.org/releases/stable/i386/ch05s01.en.html#boot-initrd
> > Quoting paragraphs 2 and 3 from your link above ...
> > Alternatively, if you intend to keep an existing partition on the hard
> > drive unchanged during the install, you can
On 2020-12-01 5:50 p.m., pe...@easthope.ca wrote:
but the CD image is not found.
Peter,
Can you please confirm if you are/are not trying to boot the ISO image
from a USB stick?
If you _are_ you are may be running into the same head-banging situation
I was having the past week. It
On Wed 02 Dec 2020 at 12:10:33 -0800, pe...@easthope.ca wrote:
> > 2) Given that choice (para 2 or 3), where did you get the vmlinuz and
> > initrd.gz you are using?
>
> vmlinuz and initrd.gz are in the .iso. No need to retrieve again.
You have a complete misunderstanding of what you are
> > https://www.debian.org/releases/stable/i386/ch05s01.en.html#boot-initrd
>
> Quoting paragraphs 2 and 3 from your link above ...
>
> Alternatively, if you intend to keep an existing partition on the hard
> drive unchanged during the install, you can download the
> hd-media/initrd.gz file and
On Tue 01 Dec 2020 at 14:50:52 -0800, pe...@easthope.ca wrote:
> https://www.debian.org/releases/stable/i386/ch05s01.en.html#boot-initrd
> gives this sample Grub2 configuration.
>
> menuentry 'New Install' {
> insmod part_msdos
> insmod ext2
> set root='(hd0,msdos1)'
> linux
On Wed, 2 Dec 2020 at 10:06, wrote:
> Installation instructions.
> the CD image is not found.
Please describe at exactly what point in your attempt you reached
this conclusion. What screen messages did you see exactly?
Due to the flexibility of Debian installation there are so many
possible
Un ami m'a proposer :
wget
http://ftp.fr.debian.org/debian/pool/main/m/manpages-l10n/manpages-fr_4.1.0-1_all.deb
sudo dpkg -i manpages-fr_4.1.0-1_all.deb
H.
Hello
j'avais déjà posé la question il y a qq mois:
https://lists.debian.org/debian-user-french/2020/04/msg00447.html
On en parle ausssi ici:
https://lists.debian.org/debian-news/2020/msg3.html
Le 17/11/2020 à 20:25, didier gaumet a écrit :
Le mardi 17 novembre 2020 à 16:20:03 UTC+1,
Le mardi 17 novembre 2020 à 16:20:03 UTC+1, bubu a écrit :
[...]
> Si je veux avoir mon "man" en français sur Buster
>
> Les paquets "manpages-fr-extra", "manpages-fr-dev", "manpages-fr" sont
> désuets en Buster.
>
> Je pourrais installer ceux de Stretch ou ceux de testing (Bullseys) avec
>
On Mi, 15 iul 20, 18:07:53, Vlad Dragomir wrote:
> Worked like a charm, I'm almost at the end of the installation process.
>
> Yes indeed, the downloaded archive contains more firmware compared to the
> installation disc, not very logical in my opinion but I am not a pro.
>
> Thank you so much,
Worked like a charm, I'm almost at the end of the installation process.
Yes indeed, the downloaded archive contains more firmware compared to the
installation disc, not very logical in my opinion but I am not a pro.
Thank you so much, virtual pints for everybody!
Cheers,
Vlad.
Vlad Dragomir wrote:
> Hello,
>
> Thank you all for all those great responses, I'm definitely grateful.
>
> Dan, I followed your instructions, please tell me if this is the expected
> output, I'll try to transcribe everything:
> Network controller: Intel Corporation Wireless 8260 (rev 3a)
>
>
On 07/14/2020 03:33 PM, Vlad Dragomir wrote:
Good evening,
I am very new to Debian, and would like to apologise first, I might not know
how exactly to describe this issue.
I tried to install Debian on an unused laptop I'm having, [ *SNIP* ]
What is make and model of the laptop?
On Tue, Jul 14, 2020 at 11:14:16PM -0500, David Wright wrote:
> On Wed 15 Jul 2020 at 05:43:06 (+0200), Vlad Dragomir wrote:
> >
> > I found that file too, actually I found four or five of them, but not all.
> > I put them on the USB installation drive but the installer kept asking for
> >
On Wed 15 Jul 2020 at 05:43:06 (+0200), Vlad Dragomir wrote:
>
> I found that file too, actually I found four or five of them, but not all. I
> put them on the USB installation drive but the installer kept asking for
> them. I'm sorry, I should have been more precise when I said that Google
>
Hello,
Thank you all for all those great responses, I'm definitely grateful.
Dan, I followed your instructions, please tell me if this is the expected
output, I'll try to transcribe everything:
Network controller: Intel Corporation Wireless 8260 (rev 3a)
Would you please tell me what to do
On 7/14/20 1:48 PM, David Christensen wrote:
On 2020-07-14 13:33, Vlad Dragomir wrote:
I tried to install Debian on an unused laptop I'm having,
It asks for additional non-free firmware, unfortunately it's an Intel
wireless card. It gives a list of files it needs in order to configure
the
On Tue 14 Jul 2020 at 16:59:00 (-0400), Dan Ritter wrote:
> Vlad Dragomir wrote:
> > I am very new to Debian, and would like to apologise first, I might not
> > know how exactly to describe this issue.
>
> Everybody starts somewhere.
>
>
> > I tried to install Debian on an unused laptop I'm
Vlad Dragomir wrote:
> I am very new to Debian, and would like to apologise first, I might not know
> how exactly to describe this issue.
Everybody starts somewhere.
> I tried to install Debian on an unused laptop I'm having, using the iso
> downloaded from this torrent:
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
‐‐‐ Original Message ‐‐‐
On Tuesday, July 14, 2020 2:48 PM, David Christensen
wrote:
> If I needed to install Debian on a laptop without Ethernet, I would buy
> a USB Ethernet adapter. The key is finding one that is supported by
> FOSS
On 2020-07-14 13:33, Vlad Dragomir wrote:
I tried to install Debian on an unused laptop I'm having,
It asks for additional non-free firmware, unfortunately it's an Intel wireless
card. It gives a list of files it needs in order to configure the network,
which is I suppose a good start.
Le lundi 08 juin 2020 à 20:59 +0200, Olivier a écrit :
>
>
> Le ven. 5 juin 2020 à 21:35, Gaëtan Perrier a
> écrit :
> > Le vendredi 05 juin 2020 à 19:22 +0200, Olivier a écrit :
> >
> > > Bonjour,
> >
> > >
> >
> > > J'ai récupéré une webcam Logitech assez ancienne.
> >
> > > Je souhaite
Non. Je ne l'ai pas non plus.
Gaêtan
Le lundi 08 juin 2020 à 20:56 +0200, Olivier a écrit :
> Le paquet uvccapture n'est pas installé sur ma machine.
> Ce paquet est-il nécessaire ?
>
> Le ven. 5 juin 2020 à 21:35, Gaëtan Perrier a
> écrit :
> > Le vendredi 05 juin 2020 à 19:22 +0200, Olivier
Le lundi 08 juin 2020 à 20:57 +0200, Olivier a écrit :
> Le ven. 5 juin 2020 à 20:39, Frederic MASSOT > a écrit :
> > Le 05/06/2020 à 19:22, Olivier a écrit :
> >
> > > Bonjour,
> >
> > >
> >
> > > J'ai récupéré une webcam Logitech assez ancienne.
> >
> > > Je souhaite l'utiliser sur un
Le ven. 5 juin 2020 à 21:35, Gaëtan Perrier a
écrit :
> Le vendredi 05 juin 2020 à 19:22 +0200, Olivier a écrit :
> > Bonjour,
> >
> > J'ai récupéré une webcam Logitech assez ancienne.
> > Je souhaite l'utiliser sur un portable sous Buster.
> >
> > La caméra me semble bien détectée mais aucune
Le ven. 5 juin 2020 à 20:39, Frederic MASSOT <
frede...@juliana-multimedia.com> a écrit :
> Le 05/06/2020 à 19:22, Olivier a écrit :
> > Bonjour,
> >
> > J'ai récupéré une webcam Logitech assez ancienne.
> > Je souhaite l'utiliser sur un portable sous Buster.
> >
> > La caméra me semble bien
Le paquet uvccapture n'est pas installé sur ma machine.
Ce paquet est-il nécessaire ?
Le ven. 5 juin 2020 à 21:35, Gaëtan Perrier a
écrit :
> Le vendredi 05 juin 2020 à 19:22 +0200, Olivier a écrit :
> > Bonjour,
> >
> > J'ai récupéré une webcam Logitech assez ancienne.
> > Je souhaite
Le vendredi 05 juin 2020 à 19:22 +0200, Olivier a écrit :
> Bonjour,
>
> J'ai récupéré une webcam Logitech assez ancienne.
> Je souhaite l'utiliser sur un portable sous Buster.
>
> La caméra me semble bien détectée mais aucune n'est visible ni dans Alsa, ni
> avec Cheese.
> J'ai :
>
> [
Désolé pour la rupture de fil, le message sur l'adresse perso, je me
suis un peu cafouillé tout seul...
Fabien
Message transféré
Sujet : Re: Installation d'une webcam Logitech sur Buster
Date : Fri, 5 Jun 2020 21:28:41 +0200
De :F. Dubois
Pour : Olivier
Le 05/06/2020 à 19:22, Olivier a écrit :
Bonjour,
J'ai récupéré une webcam Logitech assez ancienne.
Je souhaite
J'ai aussi une Logitech, Pro 9000, assez ancienne sous Buster, qui fonctionne
correctement. Dans Cheeze, je la vois sous 2 appellations : "UVC Camera
(046d:0809)" et "USB2.0 UVC HD Webcam: USB2.0 UV". Il faut que la 1ère
appellation soit sélectionnée pour qu'elle marche et si par erreur je
Bonsoir,
Le 05/06/2020 à 19:22, Olivier a écrit :
[...]
La caméra me semble bien détectée mais aucune n'est visible ni dans
Alsa, ni avec Cheese.
[...]
Pourquoi avec Alsa ?
Peux-tu l'utiliser plutôt avec guvcview ou vlc ?
Samy
Le 05/06/2020 à 19:22, Olivier a écrit :
Bonjour,
J'ai récupéré une webcam Logitech assez ancienne.
Je souhaite l'utiliser sur un portable sous Buster.
La caméra me semble bien détectée mais aucune n'est visible ni dans
Alsa, ni avec Cheese.
J'ai :
[ 3106.490546] usb 5-2: USB disconnect,
- Mail original -
> De: "Olivier"
> À: "ML Debian User French"
> Envoyé: Vendredi 5 Juin 2020 19:22:30
> Objet: Installation d'une webcam Logitech sur Buster
> Bonjour,
> J'ai récupéré une webcam Logitech assez ancienne.
> Je souhaite l'utiliser sur un portable sous Buster.
> La
Bonjour a tous
Merci pour vos reponses :)
Finalement j'ai utilise la solution de Didier avec l'image officielle et le
paquet firmware-iwlwifi_20190717-2_all.deb copie a la racine d'une autre
clef
Ca a fonctionne sans probleme, meme pas la peine de passer en mode expert.
En ce qui concerne le
On 07/05/2020 17:36, Hugues MORIN wrote:
> J'ai telecharger firmware-iwlwifi_20190717-2_all.deb qui est sense contenir
> les firmware
Les firmwares sont également ici [1].
et j'ai tente de les copier sur la clef USB dans
> /firmaware mais cela semble impossible (acces refuse ou pas assez
Si tu as une première clé USB avec un installateur Debian non(corromlpu
dessus, copie le paquet (.deb) de firmwares que tu as téléchargé sur une
seconde clé USB (normale, formatée en FAT) à la racine de celle-ci et
insère-la dans ton PC lorsque l'installateur de demande les firmwares.
Pour ça,
hello,
Je souhaiterai savoir s'il est possible d'installer le pilote
propriétaire amdgpu-pro sur debian.
Il faut qu'un paquet debian (ou ubuntu) existe.
Et si oui, comment?
Sur leur site, il y a le lien:
https://www2.ati.com/drivers/linux/ubuntu/amdgpu-pro-16.40-348864.tar.xz
Ensuite,
On Monday, 27 January 2020 04:58:06 CET Basile Starynkevitch wrote:
> Je pense que je vais devoir me réduire à remplacer le SSD M2 existant
> (celui qui contient Windows) par un SSD M2 neuf, donc sans système
> d'exploitation
>
> Le BIOS/UEFI de ma machine est scandaleusement pourri.
Ce que j'ai
la commande udisksctl status ne te montre pas ton disque Windows?
On 26/01/2020 09:58, didier.gau...@gmail.com wrote:
Le samedi 25 janvier 2020 18:40:03 UTC+1, bas...@starynkevitch.net a écrit :
[...]
Avez vous des conseils précis à me donner. C'est probablement une histoire de
BIOS.
J'arrive à booter Debian/Testing comme Ubuntu 19.10, mais pas à voir le
Le samedi 25 janvier 2020 18:40:03 UTC+1, bas...@starynkevitch.net a écrit :
[...]
> Avez vous des conseils précis à me donner. C'est probablement une histoire de
> BIOS.
>
> J'arrive à booter Debian/Testing comme Ubuntu 19.10, mais pas à voir le
> disque interne SSD.
>
> Que me conseillez
Bonjour,
J'ai déjà eu ce soucis là en voulant récupérer des données sur un SSD nvme
avec une clé bootable Ubuntu. Pour voir le disque il faudrait rajouter à
GRUB le paramètre noyau suivant:
nvme_load=YES
Le sam. 25 janv. 2020 18:37, bas...@starynkevitch.net <
bas...@starynkevitch.net> a
Sat, 25 Jan 2020 18:37:03 +0100
bas...@starynkevitch.net écrivait :
> J'arrive à booter Debian/Testing comme Ubuntu 19.10, mais pas à voir le
> disque interne SSD.
Essaie de voir dans le BIOS les paramètres SATA.
Je pense avoir eu la même chose avec mon portable Dell.
Et si le BIOS voit ton
Hi John
After a lot of fooling around, I finally settled on Salome. It was easy
to install if you ignore all of the junk in the README file. It took a
.step file from FreeCAD and turned out a 3D hexahedral .unv file with
little trouble. The mesh may not be very optimized but I don't care. I
OpenFOAM is not a monolithic GUI program. It is a library and a set of
applications built on it. See http://openfoam.org, which is mentioned
in the package description. Ignore everything they say about installing
it, though. You have installed it. You certainly don't need Docker.
You should be
Thank you for your responses,
I also thought, as Georgi suggested, of first trying to use the live edition
before proceeding to the actual installation. I should check more thoroughly
the hardware specifications, as Miata suggested Inspiron 5570 is a series of
models.
You also mentioned of
Le lundi 16 septembre 2019 21:00:04 UTC+2, Étienne Mollier a écrit :
[...]
> does someone know if UEFI
> prevents unsigned "driver" or "firmware" loading ? (or both?)
[...]
it forbids it if SecureBoot is activated:
https://wiki.debian.org/SecureBoot#Secure_Boot_limitations
ghe wrote:
>> I am a new user of Debian and Linux in general. I am planning to install
>> Debian on a Dell laptop, Inspiron 5570 in particular.
>
> I've never had much of a problem running Debian on Dell laptops. Right
> now, Buster is (reasonably) happy on my Dell Latitude 5414. Sound works,
>
On 16/09/2019 20.13, Felix Miata wrote:
> Laptops that offer Hybrid graphics (Intel+AMD) or Optimus graphics
> (Intel+NVidia)
> cause a lot of people a lot of grief. Pure Intel graphics and pure AMD
> graphics do
> a fine job without similar grief. If you need dual graphics for gaming, I
>
Thanos Katsiolis composed on 2019-09-16 20:15 (UTC+0300):
> Inspiron 5570
That is a series of models, not a model.
Laptops that offer Hybrid graphics (Intel+AMD) or Optimus graphics
(Intel+NVidia)
cause a lot of people a lot of grief. Pure Intel graphics and pure AMD graphics
do
a fine job
On 9/16/19 11:15 AM, Thanos Katsiolis wrote:
> I am a new user of Debian and Linux in general. I am planning to install
> Debian on a Dell laptop, Inspiron 5570 in particular.
I've never had much of a problem running Debian on Dell laptops. Right
now, Buster is (reasonably) happy on my Dell
On 9/16/19 8:15 PM, Thanos Katsiolis wrote:
> Hello,
>
> I am a new user of Debian and Linux in general. I am planning to install
> Debian on a Dell laptop, Inspiron 5570 in particular.
>
> I have started reading the installation guide on Debian webpage which
> mentions many points to consider
Thomas D Dial composed on 2019-09-14 13:30 (UTC-0600):
> As a first "next step" I suggest the following:
> When you see the "Debian page" - that is the Grub boot menu - press the
> 'e' key. This will present the boot control instructions for the default
> boot into your Linux in a form you can
On Sat, 2019-09-14 at 08:46 +0200, john doe wrote:
> On 9/14/2019 7:36 AM, David Christensen wrote:
> > On 9/13/19 4:45 PM, Anne wrote:
> > > Hi, I am new to debian and I can not seem to get the OS installed
> > > properly.
> > >
> > > What I have done so far is to
> > >
> > > Make a free space
What Video card do you have?
I experienced annoyance with AMD video card/driver. If that is the case,
you can search on google, or ask the mailling list again for how to
install the required firmware.
Unfortunately, it is not smooth.
On 14.09.19 01:45, Anne wrote:
>
> Hi, I am new to debian and
On Fri, 13 Sep 2019 22:36:06 -0700
David Christensen wrote:
> On 9/13/19 4:45 PM, Anne wrote:
> > Hi, I am new to debian and I can not seem to get the OS installed
> > properly.
> >
> > What I have done so far is to
> >
> > Make a free space partition of 100GB on drive D and then
> >
> > 1.
On 9/14/2019 7:36 AM, David Christensen wrote:
> On 9/13/19 4:45 PM, Anne wrote:
>> Hi, I am new to debian and I can not seem to get the OS installed
>> properly.
>>
>> What I have done so far is to
>>
>> Make a free space partition of 100GB on drive D and then
>>
>> 1. download the first DVD of
Hi, first sorry for horrible english, well try to turn off secure boot in
bios and try again to install Debian. Or like David suggestion, get
virtualbox or enable hyper-v and install in virtual machine.
Em sex, 13 de set de 2019 às 19:54, Anne escreveu:
> Hi, I am new to debian and I can not
On 9/13/19 4:45 PM, Anne wrote:
Hi, I am new to debian and I can not seem to get the OS installed properly.
What I have done so far is to
Make a free space partition of 100GB on drive D and then
1. download the first DVD of 10.1.0
2. used rufus to put it on a thumb drive
3. Booted from the
On Fri, Sep 13, 2019, 6:55 PM Anne wrote:
Hi, I am new to debian and I can not seem to get the OS installed properly.
What I have done so far is to
Make a free space partition of 100GB on drive D and then
1. download the first DVD of 10.1.0
2. used rufus to put it on a thumb drive
3. Booted
Le 11/06/19 à 00:11, "F. Dubois" a écrit :
> Pour xfce4 tu cherches tous les paquets installés contenant xfce dans
> leur nom et tu fais aptitude purge... Tu peux le faire par le biais d'un
> petit script (voir ailleurs, c'est pas mon truc) ou manuellement (je
> fais des copier coller avec la
Tue, 11 Jun 2019 00:11:38 +0200
"F. Dubois" écrivait :
> Salut,
Salut Fabien,
> Pour xfce4 tu cherches tous les paquets installés contenant xfce dans
> leur nom et tu fais aptitude purge... Tu peux le faire par le biais d'un
> petit script (voir ailleurs, c'est pas mon truc) ou manuellement
Le 10/06/2019 à 23:18, Jean-Marc a écrit :
salut la liste,
Dimanche, LCP. Une personne me demande de lui installer un autre environnement
de bureau, XFCE installé lors de l'install' ne lui convenant pas.
Je discute un peu avec lui et je crois reconnaître dans ce qu'il me dit que son
On 6/4/19 4:32 PM, Stephane Ascoet wrote:
Le 04/06/2019 à 16:22, Basile Starynkevitch a écrit :
A moi je trouve tout le contraire. Je ne connais absolument rien à
Windows, car jamais de la vie je ne l'ai utilisé sur PC (aussi bien au
boulot que perso). Mon dernier OS non Linuxien sur un PC
Le 04/06/2019 à 16:22, Basile Starynkevitch a écrit :
A moi je trouve tout le contraire. Je ne connais absolument rien à
Windows, car jamais de la vie je ne l'ai utilisé sur PC (aussi bien au
boulot que perso). Mon dernier OS non Linuxien sur un PC remonte à 1992.
Mon premier PC sous Linux,
On 6/4/19 4:11 PM, Stephane Ascoet wrote:
Le 04/06/2019 à 15:01, Basile Starynkevitch a écrit :
J'imagine que ajh-valmer a besoin d'un dual boot; moi je n'ai que Linux
sur tous mes PCs, et dans ce cas je ne trouve pas la situation
desespérée, mais en net progrès par exemple si on compare à
Le 04/06/2019 à 15:01, Basile Starynkevitch a écrit :
J'imagine que ajh-valmer a besoin d'un dual boot; moi je n'ai que Linux
sur tous mes PCs, et dans ce cas je ne trouve pas la situation
desespérée, mais en net progrès par exemple si on compare à 1993.
Bonjour, prendre 1993 pour
On 6/4/19 2:52 PM, Stephane Ascoet wrote:
Le 04/06/2019 à 14:38, ajh-valmer a écrit :
[...]
Bloody sheet microsoft.
m$ et les autres. Fabricants compris. La situation est proche du
desespoir.
J'imagine que ajh-valmer a besoin d'un dual boot; moi je n'ai que Linux
sur tous mes PCs, et
Le 04/06/2019 à 14:38, ajh-valmer a écrit :
Le 04/06/2019 à 12:55, ajh-valmer a écrit :
Je la rends bootable avec "balenaEtcher",
ça me créé une clé USB avec une minuscule
partition FAT16 et à côté une partition vide, inexistante.
(alors qu'au départ, il y avait une seule partition FAT32
qui
Le 03/06/2019 à 10:37, ajh-valmer a écrit :
On Monday 03 June 2019 10:08:07 Stephane Ascoet wrote:
Le 30/05/2019 à 18:46, ajh-valmer a écrit :
Pour booter sur une clé USB Slitaz Live
Je n'ai pas compris ce qui posait probleme, mais tu pourrais
essayer avec une cle USB qui amorce en UFI.
> Le 04/06/2019 à 12:55, ajh-valmer a écrit :
> > Je la rends bootable avec "balenaEtcher",
> > ça me créé une clé USB avec une minuscule
> > partition FAT16 et à côté une partition vide, inexistante.
> > (alors qu'au départ, il y avait une seule partition FAT32
> > qui occupait tout le volume).
>
Le 04/06/2019 à 12:55, ajh-valmer a écrit :
Je vois déjà ce lien sur le site :
www.osdisc.com/products/debian?affiliate=sysresccd
avec images à télécharger à 34$ US...
Il est pourtant bien ecrit "You can download SystemRescueCd immediately
from this page. If you cannot download it you can
On Tuesday 04 June 2019 09:58:25 hamster wrote:
> Le 30/05/2019 à 21:18, ajh-valmer a écrit :
> > Si je remets en mode UEFI, pas de boot sur la clé USB.
> Attention : windows a été installé en mode UEFI. Si tu met le BIOS en
> mode légacy, tu risque d'avoir des problèmes pour booter windows.
>
Le 30/05/2019 à 21:18, ajh-valmer a écrit :
> Si je remets en mode UEFI, pas de boot sur la clé USB.
Attention : windows a été installé en mode UEFI. Si tu met le BIOS en
mode légacy, tu risque d'avoir des problèmes pour booter windows.
La bonne solution est de travailler et installer depuis un
Le 03/06/2019 à 10:37, ajh-valmer a écrit :
Pour booter sur une clé USB Slitaz Live,
je dois mettre l'option dans le BIOS :
Legacy (au lieu de UEFI), sinon ça boote que sous windows.
Bonjour, justement, choisis une Slitaz compatible UEFI ou un
equivalent(les recentes SystemRescueCD, Ubuntu,
On Monday 03 June 2019 10:08:07 Stephane Ascoet wrote:
> Le 30/05/2019 à 18:46, ajh-valmer a écrit :
> > Pour booter sur une clé USB Slitaz Live
> Je n'ai pas compris ce qui posait probleme, mais tu pourrais
> essayer avec une cle USB qui amorce en UFI.
Pour booter sur une clé USB Slitaz Live,
Le 30/05/2019 à 18:46, ajh-valmer a écrit :
Pour booter sur une clé USB Slitaz Live
Bonjour, je n'ai pas compris ce qui posait probleme, mais tu pourrais
essayer avec une cle USB qui amorce en UFI.
--
Cordialement, Stephane Ascoet
> >>
> >> Mais pourquoi ne pas redimensionner les partitions NTFS depuis
> >> Windows ?
> >
> > Windows peut le faire alors que le système est monté ?
> Oui, en tout cas Windows Vista et 7. Pas utilisé de versions
> ultérieure
> mais il n'y a pas de raison que ça ait régressé.
Lorsque j'installe
30 mai 2019 21:19
À : debian-user-french@lists.debian.org
Objet : Re: Installation Debian sur nouveau portable
On Thursday 30 May 2019 20:47:19 JC.EtiembleG wrote:
> Le 30/05/2019 à 18:46, ajh-valmer a écrit :
> > Je lance Gparted et impossible de modifier les partitions existantes
>
Le 30/05/2019 à 21:21, ajh-valmer a écrit :
On Thursday 30 May 2019 21:04:52 Pascal Hambourg wrote:
Mais pourquoi ne pas redimensionner les partitions NTFS depuis Windows ?
Windows peut le faire alors que le système est monté ?
Oui, en tout cas Windows Vista et 7. Pas utilisé de versions
On Thursday 30 May 2019 21:04:52 Pascal Hambourg wrote:
> Méthode simple : en redémarrant Windows au lieu de l'arrêter.
> Méthode compliquée : désactiver le "démarrage rapide" dans Windows (fast
> startup, à ne pas confondre avec l'option "fast boot" de certains
> firmwares BIOS/UEFI, qui n'a
On Thursday 30 May 2019 20:47:19 JC.EtiembleG wrote:
> Le 30/05/2019 à 18:46, ajh-valmer a écrit :
> > Je lance Gparted et impossible de modifier les partitions
> > existantes de Windows (NTFS)
On Thursday 30 May 2019 19:10:34 Raphaël POITEVIN wrote:
> Il me semble que Windows ne s’éteint jamais
e démarrage rapide".
J'imagine qu'après un reboot Windows, ça doit enlever le flag.
Mais n'ayant jamais rencontrer ce problème, je n'en ai pas la certitude.
Cordialement,
Nicolas D.
-Message d'origine-
De : "Raphaël" POITEVIN
Envoyé : jeudi 30 mai 2019 19:11
À : debian-user-f
Le 30/05/2019 à 19:10, Raphaël POITEVIN a écrit :
Il me semble que Windows ne s’éteint jamais et que par conséquent, il
pose un flag sur ses partitions. J’ignore comment ça se résoud.
Méthode simple : en redémarrant Windows au lieu de l'arrêter.
Méthode compliquée : désactiver le "démarrage
Le 30/05/2019 à 18:46, ajh-valmer a écrit :
Je lance Gparted et impossible de modifier les partitions
existantes de Windows (NTFS)
Il faut désactiver le démarrage rapide de Win ;)
Pour arrêter complément le PC. -> vu que le Windows 10 triche au
démarrage car il n’arrête pas totalement la
Il me semble que Windows ne s’éteint jamais et que par conséquent, il
pose un flag sur ses partitions. J’ignore comment ça se résoud.
"ajh-valmer" writes:
> Bonjour,
>
> Je tente d'installer Stretch sur un Lenovo,
> 2 disques dur, un SSD et un HDD,
> Windows-10 pré-installé.
>
> Pour booter sur
On Wednesday 29 May 2019 10:52:29 Frederic Robert wrote:
> 1. Si vous hébergez votre serveur mail avec postfix, comment l'avez-vous
> mis en place? A la base, j'ai utilisé postfix et mutt pour lire les
> mails en local directement sur le serveur. J'aimerai apprendre à faire
> une installation
On 5/29/19 3:46 PM, Daniel Caillibaud wrote:
Tu trouveras pas mal de tuto avec postfix / dovecot (+sieve pour le
filtrage) / rspamd (+dmarc & dkim)
— courier-base, courier-authdaemon, courier-authlib-mysql,
courier-imap, courier-pop ; — roundcube pour l'interface IMAP ;
— le
On 5/29/19 11:58 AM, Ph. Gras wrote:
Je peux te fournir un road book complet pour réaliser ta propre configuration,
c'est pas fastoche !
Bonsoir,
Ce serait bient gentil de ta part. Livre sous quelle licence?
Bonne soirée,
--
Frédéric Robert
Le 29/05/19 à 13:58, "Ph. Gras" a écrit :
> > 1. Si vous hébergez votre serveur mail avec postfix, comment
> > l'avez-vous mis en place? A la base, j'ai utilisé postfix et mutt pour
> > lire les mails en local directement sur le serveur. J'aimerai apprendre
> > à faire une installation propre
Bonjour,
> 1. Si vous hébergez votre serveur mail avec postfix, comment l'avez-vous mis
> en place? A la base, j'ai utilisé postfix et mutt pour lire les mails en
> local directement sur le serveur. J'aimerai apprendre à faire une
> installation propre avec serveur pop/imap
J'ai installé les
le lundi 08 avril 2019 à 20:14 (+0200), Pascal Hambourg a écrit:
> Ce n'est pas GRUB mais l'initramfs, donc Linux.
> La procédure ci-dessous est donc applicable.
>
> > > Le menu de GRUB s'affiche-t-il ? Si oui, appuie sur "e", remplace sdb2 par
> > > sda2 (QWERTY : touche Q pour taper A), appuie
Le 08/04/2019 à 18:27, sTriX a écrit :
Le message s'affiche après le menu GRUB :
Gave up waiting for root file system device. Common problems:
-Boot args (cat proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
Missing modules (cat /proc/modules; ls /dev
ALERT! /dev/sdb2 does
le dimanche 07 avril 2019 à 16:36 (+0200), Pascal Hambourg a écrit:
> Le 07/04/2019 à 16:10, sTriX a écrit :
> > Bonjour,
> > Sur un ordinateur qui fonctionnait avec une distribution Crunchbang,
> > j'ai procédé à l'installation de debian-live-9.8.0-amd64-lxde.iso via
> > une clé USB.
> >
> > La
201 - 300 of 4424 matches
Mail list logo