Le samedi 23 janvier 2010, Norbert Ponce a écrit :
a.lb a écrit :
Le vendredi 22 janvier 2010, Julien a écrit :
Le jeudi 21 janvier 2010 à 20:49 +0100, a.lb a écrit :
Bonjour,
J'ai un curieux problème avec le montage d'une partition nfs.
Je peux la monter en ligne de commande en tant
Bonjour
Je suis confronté au problème suivant : une station sous debian doit
télécharger des fichiers sur un site FTP sur internet en passant par
un proxy ftp (ftp-proxy) sur un serveur debian.
Hypothèse :
téléchargement via ftp du fichier 'fichier' sur le server ftp 'server'
en utilisant le
Bonjour,
Comme je n'ai pas trouvé de dépôt tout fait, je suis donc passé à la
phase compilation manuelle ;-)
J'ai donc téléchargé les sources du noyau 2.6.33-rc5 à partir de
kernel.org et j'ai enchaîné avec la méthode suivante :
# cd /opt
# tar --bzip2 -xvf linux-2.6.33-rc5.tar.bz2
# cd
Re-bonjour,
Je continue avec mes questions ;-)
Pour ma carte ATI, j'ai donc compilé le driver radeonhd via la méthode
suivante :
# apt-get install build-essential git-core configure-debian automake
autoconf xorg-dev libtool libdrm-dev libpci-dev xutils-dev xutils
mesag-dev
# cd /opt
# git clone
Re-bonjour,
Promis, c'est ma dernière question pour aujourd'hui ;-) En plus, ce
n'est pas vraiment une question Debian, mais bon, sait-on jamais...
Donc, sur mon serveur, j'ai 4 Go composés de 4 barrettes de 1 Go.
Si je retire 2 barrettes, au démarrage, il me détecte bien 2 Go.
Si je retire les
David BERCOT a écrit :
Bonjour,
Comme je n'ai pas trouvé de dépôt tout fait, je suis donc passé à la
phase compilation manuelle ;-)
J'ai donc téléchargé les sources du noyau 2.6.33-rc5 à partir de
kernel.org et j'ai enchaîné avec la méthode suivante :
# cd /opt
# tar --bzip2 -xvf
David BERCOT deb...@bercot.org à écrit le Sat, 23 Jan 2010 11:14:12
+0100
Re-bonjour,
Promis, c'est ma dernière question pour aujourd'hui ;-) En plus, ce
n'est pas vraiment une question Debian, mais bon, sait-on jamais...
Donc, sur mon serveur, j'ai 4 Go composés de 4 barrettes de 1 Go.
David BERCOT a écrit :
Re-bonjour,
Promis, c'est ma dernière question pour aujourd'hui ;-) En plus, ce
n'est pas vraiment une question Debian, mais bon, sait-on jamais...
Donc, sur mon serveur, j'ai 4 Go composés de 4 barrettes de 1 Go.
Si je retire 2 barrettes, au démarrage, il me
On Wed, Jan 20, 2010 at 11:29:54PM +0100, Pierre Allken-Bernard wrote:
Le 20/01/2010 à 23:26:36, Jean-Yves F. Barbier a écrit :
Franck Joncourt a écrit :
...
Tu devrais aussi pouvoir le faire en redirigeant /dev/dsp, et en utilisant
netcat sur les deux machines, l'une en écoute,
Bonjour,
j'aimerais savoir s'il est possible de synchroniser Evolution (contacts,
tâches ...) avec un HP iPaq.
Les infos que j'ai pu trouvées sont un peu floues et contradictoires.
Un retour d'expérience ?
Merci.
Bonjour,
A priori, tu dois suivre à peu près la même démarche que pour un SLi :
lorsqu'il y a plusieurs cartes graphiques, le pilote nVidia ne parvient
pas à détecter celle qu'il doit utiliser. La démarche est expliquée,
entre autres, sur la docu d'Ubuntu
(http://doc.ubuntu-fr.org/nvidia_sli). Ca
fabrice régnier a écrit :
Je précise:
FR-PORT:/media# cat /proc/mounts | grep usb
/dev/sdb /media/usb0 vfat
rw,nosuid,nodev,noexec,noatime,fmask=,dmask=,allow_utime=0022,codepage=cp437,iocharset=utf8
0 0
Peut-être que c'est le code page qui est à changer au mount ? ou
Bonjour,
je n'arrive pas à compiler le driver nvidia proprio à partir du run
(190.53) avec un kernel 2.6.33-rc. Pas de pb avec les noyau jusqu'à
2.6.32 mais ensuite j'ai un message d'erreur comme quoi il ne trouve pas
la version du noyau dans les sources. J'indique les sources avec
giggz a écrit :
je n'arrive pas à compiler le driver nvidia proprio à partir du run
(190.53) avec un kernel 2.6.33-rc. Pas de pb avec les noyau jusqu'à
2.6.32 mais ensuite j'ai un message d'erreur comme quoi il ne trouve pas
la version du noyau dans les sources. J'indique les sources avec
Le 23 janvier 2010 11:38, tv.deb...@googlemail.com
tv.deb...@googlemail.com a écrit :
David BERCOT a écrit :
Re-bonjour,
Promis, c'est ma dernière question pour aujourd'hui ;-) En plus, ce
n'est pas vraiment une question Debian, mais bon, sait-on jamais...
Donc, sur mon serveur, j'ai 4 Go
Le Sat, 23 Jan 2010 12:24:49 +0100
giggz giggzou...@gmail.com a écrit:
Bonjour,
je n'arrive pas à compiler le driver nvidia proprio à partir du run
(190.53) avec un kernel 2.6.33-rc. Pas de pb avec les noyau jusqu'à
2.6.32 mais ensuite j'ai un message d'erreur comme quoi il ne trouve pas
François Boisson a écrit :
...
Par contre tu peux faire ça à la debian via module assistant avec les paquets
adequats que tu trouveras sur
http://boisson.homeip.net/debian/Nvidia
le packageur fou a encore frappé :D
--
If you don't have time to do it right, where are you going to find the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 23/01/2010 11:16, François Boisson wrote:
Par contre tu peux faire ça à la debian via module assistant avec les paquets
adequats que tu trouveras sur
http://boisson.homeip.net/debian/Nvidia
190.53 vient d'atteindre Sid :
François Boisson a écrit :
Le Sat, 23 Jan 2010 12:24:49 +0100
giggz giggzou...@gmail.com a écrit:
Bonjour,
je n'arrive pas à compiler le driver nvidia proprio à partir du run
(190.53) avec un kernel 2.6.33-rc. Pas de pb avec les noyau jusqu'à
2.6.32 mais ensuite j'ai un message d'erreur
Pour l'instant...
- Gspot est un applet pour gnome, installable sous xfce via
xfce4-xfapplet-plugin, avec une documentation très (trop ?) concise. Je
n'ai pas réussi à le faire fonctionner, sous xfce et je n'ai pas
l'intention de changer de windows manager.
- Teardrop s'installe au final
Bonjour,
Je viens de faire un upgrade et mauvaise surpise :
Paramétrage de certmaster (0.25-1) ...
insserv: Service network has to be enabled to start service certmasterd
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg : erreur de traitement de certmaster
Bonsoir,
Je viens de m'apercevoir que le wifi ne fonctionne plus sur mon pc
portable en testing (Gnome). Le module wifi est un intel 3945:
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan]
Network Connection (rev 02)
un lsmod | grep iwl me donne:
iwl394545717
Salut,
Quelqu'un a-t-il un retour d'expérience sur les pilotes Lexmark pour
Linux? C'est du libre ou du propriétaire comme Epson?
Merci.
Gaëtan
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme
Le samedi 23 janvier 2010, Gaëtan PERRIER a écrit :
Salut,
Quelqu'un a-t-il un retour d'expérience sur les pilotes Lexmark pour
Linux? C'est du libre ou du propriétaire comme Epson?
Merci.
Gaëtan
--
Lexmark :
Méfies toi des (rares) pilotes pour Linux :
souvent ils ne fonctionnent
Gaëtan PERRIER a écrit :
Bonsoir,
Bonsoir
[...]
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan]
Network Connection (rev 02)
[...]
Je suis avec SID et le même chipset, en 2-6-32 et n'ai aucun problème.
D'ailleurs depuis le 2.6.29-2 le driver est stable si l'on est
Le Sat, 23 Jan 2010 22:43:21 +0100
Daniel Huhardeaux no-s...@tootai.net a écrit:
Gaëtan PERRIER a écrit :
Bonsoir,
Bonsoir
[...]
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan]
Network Connection (rev 02)
[...]
Je suis avec SID et le même chipset, en
Bonjour,
Premièrement merci à ceux qui m'ont répondu j'ai réussi à arranger
quelque problème je crois.
J'ai l'impression que ça s'est améliorer, maintenant quand je fais
startx l'écran reste noir mais ne s'éteint pas comme au début. Donc je
crois que ça commence à s'améliorer. Je comprend
Gaëtan PERRIER a écrit :
[...]
Je viens de trouver, c'est lié à une mise à jour acpi. Maintenant il
faut installer le paquet rfkill
Ce paquet n'est pas installé sur mes machines et ne serait valable qu'a
partir du 2.6.31. En contrepartie -peut être- j' utilise wpasupplicant.
--
Daniel
Keven Chaussé a écrit :
J'ai l'impression que ça s'est améliorÉ, maintenant quand je fais
startx l'écran reste noir mais ne s'éteint pas comme au début. Donc je
crois que ça commence à s'améliorer. Je comprend un peux mieux mon
matériel donc voici un petit résumé:
Mon ordinateur portable
Daniel Huhardeaux a écrit :
Gaëtan PERRIER a écrit :
[...]
Je viens de trouver, c'est lié à une mise à jour acpi. Maintenant il
faut installer le paquet rfkill
Ce paquet n'est pas installé sur mes machines et ne serait valable qu'a
partir du 2.6.31. En contrepartie -peut être- j' utilise
Le 23-01-10 17:30, Jean-Yves F. Barbier a écrit :
Keven Chaussé a écrit :
J'ai l'impression que ça s'est améliorÉ, maintenant quand je fais
startx l'écran reste noir mais ne s'éteint pas comme au début. Donc je
crois que ça commence à s'améliorer. Je comprend un peux mieux mon
matériel
Keven Chaussé a écrit :
Ok, bon j'ai modifiÉ mon xorg.conf. ça ne fonctionne toujours pas
(désespoir!)
Je n'ai pas les memeS erreurs cependant.
(je metS encore en pièce jointe mon xorg.conf, (l'option meta c'est un
essai que je faisais , ça ne marche pas que je le mette ou non, la
Jean-Yves F. Barbier a écrit :
(WW) xf86OpenConsole: setsid failed: Operation not permitted
anormal: le user est-il bien dans le groupe video et les droits de
/dev/nvidia* (s'ils sont là) sont-ils à root:video c440?
c660
--
Spare no expense to save money on this one.
--
Hola:
A ver si alguno tiene una explicación para esta curiosidad.
(he buscado un poco en internet pero no he visto nada al respecto)
Tengo una máquina virtual con Sid corriendo en kvm sobre Lenny.
Abro en ambas unos xterm con el color de fondo lightgrey (211,211,211)
A simple vista noto que los
Ricardo Adolfo Sánchez Arboleda
Linux Registered User #474919
Debian GNU/Linux Squeeze/sid \n \l
Máquina #394093_User #143
La meta es conseguir, defender y mantener nuestra libertad
Para su información
El Sistema de Información de Documentos y Elementos Extraviados,
Sidex, funcionará
Creo que lo primero que debes decirnos es si tu tienes control sobre esas
maquinas.
Tienes contraseña del usuario administrador de windows tu solo???
En caso de ser asi puedes usar directivas que solo el usuario fulano cambie el
grupo
de trabajo.
La otra via es montar un dominio como te dicen
El Sat, 23 Jan 2010 14:57:03 +0100, fernando sainz escribió:
Tengo una máquina virtual con Sid corriendo en kvm sobre Lenny.
Abro en ambas unos xterm con el color de fondo lightgrey (211,211,211) A
simple vista noto que los colores son distintos. ejecuto xcolorsel en la
maquina host (Lenny)
El día 23 de enero de 2010 16:49, Camaleón noela...@gmail.com escribió:
El Sat, 23 Jan 2010 14:57:03 +0100, fernando sainz escribió:
Tengo una máquina virtual con Sid corriendo en kvm sobre Lenny.
Abro en ambas unos xterm con el color de fondo lightgrey (211,211,211) A
simple vista noto que
Mi Lista Multinivel: Te enseño a generar dinero totalmente gratis
ATENCION REGISTRATE YA A http://www.hyifund.com/?id=19084 PLAN DE INVERCION
GRATUITO, CUANDO TE REGISTRAS TE REGALAN 2,50 DOLARES, CERO TRABAJO, 400%ANUAL,
SIN INVERTIR, SOLO REGISTRATE
Haz clic en el
El día 23 de enero de 2010 13:50, Yoandy Melero escribió:
(reenvío a la lista)
Te paso un ejemplo que he encontrado buscando en Google para sustituir
el
nombre del remitente:
***
/^From:.*usua...@dominio\.com/ REPLACE From: Usuario
***
hermano se puede hacer de esta forma???
El Sat, 23 Jan 2010 10:42:53 -0500, Ricardo Adolfo Sánchez Arboleda
escribió:
Para su información
El Sistema de Información de Documentos y Elementos Extraviados, Sidex,
funcionará desde el portal de la Policía Nacional.
(...)
Web para diligenciar la denuncias:
Hola amigos de la lista les escribo porque tengo un servidor dhcp en debían
leni todo bien pero quisiera saber cómo ver que ips ha asignado el servidor
porque lo tengo dando ip a una red inalambrica
--Mensaje original--
De: Camaleón
Remitente: news
Para:
El Sat, 23 Jan 2010 17:51:00 +, maedca escribió:
Hola amigos de la lista les escribo porque tengo un servidor dhcp en
debían leni todo bien pero quisiera saber cómo ver que ips ha asignado
el servidor porque lo tengo dando ip a una red inalambrica
Me parece que el más reciente lo tienes
negocios en Web Site: Publicidades de WebSites
¡Ven y únete el negocios en Web Site!
javier fernandez aliaga
Haz clic en el vínculo siguiente para participar:
http://negociosenwebsite.ning.com/?xgi=09sFFFB1uh5dLgxg_source=msg_invite_net
If your email program doesn't
Estaba comprobando las tablas temporales que se crean en disco con un
simple SHOW STATUS LIKE 'Created_tmp_disk_tables'; Pero m'he he
encontrado por ahí gente que lo consulta con /*!5 global */ así:
SHOW /*!5 global */ STATUS LIKE 'Created_tmp_disk_tables'; .
Es la primera vez que veo
Saludos a todos listeros
Necesito realizar una salva a todos mis correos guardados de forma local
en mi pc con debian 5.03 instalado. Utilizo el gestor de mensajería
Icedove 2.0.0.22
--
Yordanis Peláez Figueroa
adminDME Santo
El 24/01/10 02:40, yordanis escribió:
Saludos a todos listeros
Necesito realizar una salva a todos mis correos guardados de forma local
en mi pc con debian 5.03 instalado. Utilizo el gestor de mensajería
Icedove 2.0.0.22
Estan en la carpeta ~/.mozilla-thunderbird
Para respaldarlos solo
Estaba comprobando las tablas temporales que se crean en disco con un
simple SHOW STATUS LIKE 'Created_tmp_disk_tables'; Pero m'he he
encontrado por ahí gente que lo consulta con /*!5 global */ así:
SHOW /*!5 global */ STATUS LIKE 'Created_tmp_disk_tables'; .
Es la primera vez que
Estaba comprobando las tablas temporales que se crean en disco con un
simple SHOW STATUS LIKE 'Created_tmp_disk_tables'; Pero m'he he
encontrado por ahí gente que lo consulta con /*!5 global */ así:
SHOW /*!5 global */ STATUS LIKE 'Created_tmp_disk_tables'; .
Es la primera vez que
Estimada lista:
He leido el manual de ffmpeg, sin embargo no puedo resolver un pequeño
problemiga:
- Tengo un audio en formato ogg, que dura 9 minutos.
- Tengo una sola imagen en formato png
mediante el siguiente comando hago que la imagen quede empalmada con el
audio, es decir, creo un video
Olá!
Estou com o seguinte problema:
Quando abro um arquivo de localizações kmz ou kml gerado pelo Google
Earth do Windows os pontos caem nos lugares errados. Por exemplo, um
ponto que deveria estar em Bertioga, litoral de São Paulo, foi parar
depois de Campos do Jordão, quase em Minas
Em Tue, 19 Jan 2010 19:37:33 -0200,
Still still.debian.l...@gmail.com escreveu:
* Konnichiwa Heitor Moraes-sama:
Vai ver é porque existem um zilhão de distribuições com multiplas
versões correntes e trilhões de browser.
Fora os quadrilhões de métodos para setar o jre, e o Debian que
Em Sat, 23 Jan 2010 09:25:43 -0200,
Gunther Furtado gunfurt...@gmail.com escreveu:
Em Tue, 19 Jan 2010 19:37:33 -0200,
Still still.debian.l...@gmail.com escreveu:
* Konnichiwa Heitor Moraes-sama:
Vai ver é porque existem um zilhão de distribuições com multiplas
versões correntes e
Bom dia!
Pessoal, já tive esse problema tempos atrás e consegui resolver,
mas agora não estou conseguindo lembrar/encontrar os comandos, alguém
pode dar uma força aí de como apagar esses arquivos?
/var/run# ls -al
ls: impossível acessar acpid.pid: Manipulador de arquivo NFS corrompido
2010/1/22 Vitor Eduardo Souza lança vitored...@yahoo.com.br
A algum tempo estou tentado configurar o suporte à gráfico no meu i25 da
intelbras. Ele vem com a Mobile GM965/GL960 Integrated Graphics Controller,
uma placa on-board da Intel que parece não ser bem suportada pela versão
lenny
Sua descrição está muito genérica. Poste o erro do make e, se
possível, as opções de configuração de compilação que você está
utilizando.
Pra viver no bleeding-edge, usando tudo do mais recente, eu não
recomendaria Debian, que prima pela estabilidade.
Aliás, pra compilar dos fontes, eu
Use o fsck
# mount / -o remount,ro
# fsck -f /
Kléber Leal
--
Não à pirataria. Sim ao Software Livre.
- Mensagem original
De: Junior Polegato - Linux li...@juniorpolegato.com.br
Para: Lista de Debian debian-user-portuguese@lists.debian.org
Enviadas: Sábado, 23 de Janeiro de 2010
Hi,
This may not be debian-specific question, but with the group expertise,
I think this would be a good reference for
anybody.
I think this question has been debated a lot but still there is no clear
information on what to do.
The question is, if you want to share data between linux and
On Sat, Jan 23, 2010 at 01:15:39AM EST, Chris Jones wrote:
[..]
I the above question the bizarre joke, or was this meant as a reply to a
different post?
s/I the above/Is the above/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
On Fri, Jan 22, 2010 at 09:32:26PM -0500, Chris Jones wrote:
On Fri, Jan 22, 2010 at 09:09:40PM EST, Freeman wrote:
[..]
Is there really even a point to filing a bug report against something
when the fix is upstream?
What makes you think the bug is upstream?
Literally speaking, the
Nima Azarbayjany wrote:
set gfxpayload=keep will tell Grub2 to hand off the graphics settings
to the kernel, which if configured properly will carry them forward.
There are some other settings to tweak as well, insmod vbe and whatnot
in the appropriate file, but that's about the gist of it.
Sven Hoexter wrote:
On Fri, Jan 22, 2010 at 09:39:27PM +0100, Sven Joachim wrote:
On 2010-01-22 21:02 +0100, Camaleón wrote:
As Mozilla has stopped the support (no more security patches) for Firefox
releases 3.5 (in August 2010, 3.5 will also be dropped), and Lenny is
shipped with
Hi,
This may not be debian-specific question, but with the group expertise, I
think this would be a good reference for anybody.
I think this question has been debated a lot but still there is no clear
information on what to do.
The question is, if you want to share data between linux and
On Sat, Jan 23, 2010 at 03:43:42AM EST, Freeman wrote:
On Fri, Jan 22, 2010 at 09:32:26PM -0500, Chris Jones wrote:
On Fri, Jan 22, 2010 at 09:09:40PM EST, Freeman wrote:
[..]
I hadn't thought much of it and scarfed libtre5 from sid. Will it not
install to lenny?
Probably would, but I'm
On Sat, 23 Jan 2010, Foss User wrote:
On Sat, Jan 23, 2010 at 3:03 AM, Eric Gerlach
egerl...@feds.uwaterloo.ca wrote:
On Fri, Jan 22, 2010 at 12:07:57AM +0530, Foss User wrote:
foss...@squeeze:~$ ps -aef | grep 4847
fossist 4987 3680 0 00:02 pts/3 00:00:00 grep 4847
On Sat, 23 Jan 2010 11:07:41 +0800
Umarzuki Bin Mochlis Moktar umarz...@gmail.com wrote:
i had enabled lenny-backports but aptitude -t lenny-backports install
iceweasel installs Iceweasel 3.0.6
There isn't an iceweasel package in Backports, so you're stuck with
the one in Lenny... unless you
2010/1/23 Graham savagebiscu...@googlemail.com
On Sat, 23 Jan 2010 11:07:41 +0800
Umarzuki Bin Mochlis Moktar umarz...@gmail.com wrote:
i had enabled lenny-backports but aptitude -t lenny-backports install
iceweasel installs Iceweasel 3.0.6
There isn't an iceweasel package in Backports,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 23-1-2010 9:13, Bhasker C V wrote:
Hi,
This may not be debian-specific question, but with the group expertise,
I think this would be a good reference for
anybody.
I think this question has been debated a lot but still there is no clear
Martin McCormick wrote:
I recently needed to clear out some old entries from the
.ssh/known_hosts file on a Debian system and discovered that I
couldn't tell which system key was which because they were all
type rsa keys instead of the type DSA keys which do contain a
field with either
Nick Douma wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 23-1-2010 9:13, Bhasker C V wrote:
Hi,
This may not be debian-specific question, but with the group expertise,
I think this would be a good reference for
anybody.
I think this question has been debated a lot but still
On Sat, 23 Jan 2010 20:13:26 +0800
Umarzuki Mochlis umarz...@gmail.com wrote:
my mistake, the package is for amd64 and powerpc
http://packages.debian.org/search?suite=lenny-backportssearchon=nameskeywords=iceweasel
No, it's my mistake. I didn't properly check with the Debian packages
page
Thank You for Your time and answer, Todd:
This generally happens when ifupdown wasn't called to enable the
interface.
If not through
# /sbin/ifup eth0
then how?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
On Wed, 20 Jan 2010 15:18:32 -0500, Chris Jones wrote:
On Wed, Jan 20, 2010 at 12:22:45PM EST, Camaleón wrote:
This bug is ancient but sounds like what you are reporting:
http://dev.mutt.org/trac/ticket/663
(...)
I also posted the question to mutt-users mailing list but still no
On Fri, 22 Jan 2010 16:50:57 -0600, Boyd Stephen Smith Jr. wrote:
On Friday 22 January 2010 16:28:37 Camaleón wrote:
So, do you think the package will be available in backports for stable
release (Lenny) or just indicates the package is being tested for
another branch (unstable/testing)? :-?
On Fri, Jan 22, 2010 at 10:28:26PM +, Bhasker C V wrote:
Hi,
This may not be debian-specific question, but with the group expertise,
I think this would be a good reference for anybody.
I think this question has been debated a lot but still there is no clear
information on what to do.
On 2010-01-22 at 18:11:38 -0500, Chris Jones wrote:
PIII 650MHz - 386M of RAM - ATI Rage Mobility (Mach64).
That is *lightning fast* compared to my slowest machine,
a PII 266 MHz with a very slow hard drive. And the saddest
thing is, until about three years ago, it was my fastest machine!
The
On Sat, 23 Jan 2010 14:30:04 + (UTC), Camaleón in gmane.linux.debian.user
wrote:
On Wed, 20 Jan 2010 15:18:32 -0500, Chris Jones wrote:
On Wed, Jan 20, 2010 at 12:22:45PM EST, Camaleón wrote:
This bug is ancient but sounds like what you are reporting:
I installed the lenny Octave package and this is what I get:
octave:1 octave_config_info (CXXFLAGS)
ans = -O2 -g
Does this mean that Octave was built with debug symbols? If so, why?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
It's weird but it's not working for me. Somehow update-grub (as well as
update-grub2, in case they are different) ignore all modifications to
/etc/default/grub. I'm giving up. Should I report a bug?
Hi, I use a slightly different way, I put:
GRUB_GFXMODE=1440x900 640x480
in
On Fri, 22 Jan 2010 22:28:26 +, Bhasker C V wrote:
(...)
So, the question... what FS to use which is good and reliable in both
windows and also linux ?
Is there any file system in linux which can work in windows also
(meaning it can be read and optionally written-to in windows
Salve ho acquistato da qualche mese un computer Packard Bell modello
DOTS.IT/010 S/N: LUB900B03193045F0D1601 (se va sul sito ed inserisceil
serial number le escono tutte le specifiche) ho bisogno di formattarlo e
volevo installarci una versione di Linux volevo sapere quale versione posso
Hi,
What's the recommended way to deal with dormant package maintainer?
The following bug has been reported for over 2 years, which is an
extremely easy fix. Patch is also available.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=431297
However, the problem still remains:
$ mp3rename -v -p
On Wed, 20 Jan 2010 18:14:08 +0100, ludovico van wrote:
so, is there a tool like ddrescue, which ignores errors (and maybe
retries to read the bad blocks), but working at the filesystem level,
so i can copy only selected files?
I think the problem is next step -- if such program does exist,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi, Debian Users.
A friend of mine asked if I could send him encrypted mail using X.509,
rather than OpenPGP which I normally use.
Apparently, gpgsm is used for X.509, and shows up in kmail so I figure
the capabilities are there.
Google is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 23 January 2010, Curt Howland was heard to say:
Hi, Debian Users.
A friend of mine asked if I could send him encrypted mail using
X.509, rather than OpenPGP which I normally use.
Ok, to continue the discussion, it turns out that (DN)
It's weird but it's not working for me. Somehow update-grub (as well as
update-grub2, in case they are different) ignore all modifications to
/etc/default/grub. I'm giving up. Should I report a bug?
Are you making all the changes that have been suggested?
In short:
In
/etc/default/grub
On 2010-01-23 18:08 +0100, George wrote:
I installed the lenny Octave package and this is what I get:
octave:1 octave_config_info (CXXFLAGS)
ans = -O2 -g
Does this mean that Octave was built with debug symbols?
Yes.
If so, why?
Because it makes debugging octave bugs possible? Note that
Camaleón wrote:
On Fri, 22 Jan 2010 22:28:26 +, Bhasker C V wrote:
(...)
So, the question... what FS to use which is good and reliable in both
windows and also linux ?
Is there any file system in linux which can work in windows also
(meaning it can be read and optionally
Hi all,
This is strange.
I created a file system on top of luks and does not have any data yet.
The very first fsck gives an error in the freshly created file system !
$ sudo mke2fs -j /dev/mapper/cryptvol
mke2fs 1.41.2 (02-Oct-2008)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Bhasker C V wrote:
Hi all,
This is strange.
I created a file system on top of luks and does not have any data yet.
The very first fsck gives an error in the freshly created file system !
$ sudo mke2fs -j /dev/mapper/cryptvol
mke2fs 1.41.2 (02-Oct-2008)
Filesystem label=
OS type: Linux
Block
Hi there,
I seem to have run into what I hope to be a common compliation error that I
unfortunatly can not get past. The problem is with very basic C libraries. In
the xen project Im compiling there is a crc32.c source file where zutil.h is
included (this seems to link up). Then
On Sat, Jan 23, 2010 at 01:30:59PM +, Bhasker C V wrote:
Nick Douma wrote:
[snip]
Using NTFS on linux and windows is cool. I have consistently seen that
when there are large number of files, undoubtably,
ntfs volume goes corrupt and chkdsk simply removes files and creates
data loss. I
On Sat, Jan 23, 2010 at 01:35:23PM -0500, Curt Howland wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 23 January 2010, Curt Howland was heard to say:
Hi, Debian Users.
A friend of mine asked if I could send him encrypted mail using
X.509, rather than OpenPGP which I
Hi
subject says it all I have a lv, which i have used luks to encrypt and
now I would like to extend it.
I am guessing the process is going to involve coping the files over to
another partition and then back again ?
Alex
--
It would be helpful if we opened up ANWR (Arctic National Wildlife
ciao a tutti
c'e' qualche utility che permette di contare quante volte una parola
si ripete in un file di testo ?
grazie !
--
roberto
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
hello
is there any linux built-in utilities to count how many times a string
occur in a text file ?
ps: sorry for the italian post
--
roberto
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
On 22 January 2010 21:42, Eric Gerlach egerl...@feds.uwaterloo.ca wrote:
On Tue, Jan 12, 2010 at 04:23:10PM -0500, Tim Tebbit wrote:
AG wrote:
In Icedove (Thunderbird) v2.0.0.22 on Debian testing is there an option
to automatically jump to the bottom of an email using the preview pane
to
Bhasker C V wrote:
Bhasker C V wrote:
Hi all,
This is strange.
I created a file system on top of luks and does not have any data yet.
The very first fsck gives an error in the freshly created file system !
$ sudo mke2fs -j /dev/mapper/cryptvol
mke2fs 1.41.2 (02-Oct-2008)
Filesystem label=
OS
Quoting roberto on 2010-01-23 15:33:53:
is there any linux built-in utilities to count how many times a string
occur in a text file ?
I don't know of any actual utilities to do so, but there's a handy
little pipeline that I use as a generic string-counter that, so far,
works for all files I've
Alex Samad wrote:
On Sat, Jan 23, 2010 at 01:30:59PM +, Bhasker C V wrote:
Nick Douma wrote:
[snip]
Using NTFS on linux and windows is cool. I have consistently seen that
when there are large number of files, undoubtably,
ntfs volume goes corrupt and chkdsk simply removes
1 - 100 of 121 matches
Mail list logo