I can't see anything relevant in the log (set to Info) after switching
to bitrate 128kbps.
Ditto after I tried switching SB Player to Net Bandwidth = Low.
Then I used Performance Monitor to monitor the VPN virtual adapter and
for each track it peaks at 1Mbps for 20-30sec but then drops to a few
(Not sure where the dup posting is? I asked about a thin player
(stream.mp3) elsewhere but that was specific.)
Great now I've got LAME installed and configured the bitrate limiting.
How do I verify the client's bit rate (SB Player)?
The server says it's playing FLAC of course but I can't see
Hi
I'd like to have occasional access to my LMS from an Android device but
it will most likely be from a spotty wifi connection abroad (or
cellular/mobile data) so I'd like for the data to be economical (given
my library is all flac).
Ive got ZeroTier One VPN loaded onto my LMS Windows machine
Aha - I had assumed that "(scan) - All Scan Logging" covered all the
scan options, but I needed to change the other scan options too.
Artwork.db is down from 1GB to 93MB(!) and cache.db from 10MB to 1MB.
Timing is much better now with the db wiping taking around 4m 40s and
Total Time: 01:39:50.
Yes that is much better.
I've set "(scan) - All Scan Logging" to debug already.
I'm missing the previous lines like
main::main (250) Cache init...
Slim::Utils::Strings::loadStrings (126) Retrieving string data from
string cache: C:\ProgramData\Squeezebox\Cache\strings.8664.bin
OK I deleted the artwork and cache db files (I didn't before as I hadn't
been asked directly and didn't want to erase potential diagnostic data)
but today's scan time went up to nearly 5 hours! :-(
Unfortunately some of the debug logging seems to have gone so I can't
tell where the delay is e.g.
The scan time seems to have dropped by 40 mins after disabling the
itunes and MusicMagic plugins. Not sure why that is.
But the 9min delay after "Scanner done init..." is still there. Wiping
the db?
The artwork pre-cache is set to pre-cache album artwork (don't recall
ever changing it).
Will send
Latest scan log - with a 9m delay after Scanner done init...
Code:
[17-01-26 07:00:58.9831] main::main (205) Starting Logitech Media Server
scanner (v7.9.0, 1484464959, Sun Jan 15 07:29:05 CUT 2017) perl 5.014001
[17-01-26 07:00:58.9839] main::initializeFrameworks
Here's this morning's scan - similar time, no settings changed. But this
time I wonder why there is a 9 minute delay after Scanner done Init?
Not quite sure what you mean by importers. I have mostly the default
plug-ins plus Cast Bridge.
Changed server.plugins to debug logging for next time.
mherger wrote:
>
>
> Are you sure you made the log settings stick? Could you please add debug
>
> logging for 'server', too?
>
> What importer plugins are you using (iTunes, some of Erland's, etc.)?
> Please next
> time provide a full scanner.log file.
>
> --
>
> Michael
Ok the log
Well it was just half an hour delay this time.
[17-01-23 20:13:53.9013] main::main (205) Starting Logitech Media Server
scanner (v7.9.0, 1484464959, Sun Jan 15 07:29:05 CUT 2017) perl
5.014001
[17-01-23 20:13:54.6147] Slim::Schema::forceCommit (2149) Warning:
Trying to commit transactions before
Ok I changed (scan) - All Scan Logging to debug (and anything else with
scan in it) and set max db memory.
The scanner log looks the same though i.e. it seems not to have started
actual scanning yet after scan initiation:
[17-01-23 20:13:53.9013] main::main (205) Starting Logitech Media Server
Hi
I updated to LMS7.9 recently and checked the scanner log to see the
improved scanning times, but discovered that my scan was still taking
quite a while to complete. It is scheduled to clear and rescan at 7:00
AM using the Rescan Music Library plugin.
In scanner.log I see the above error and
*Every* backup sol'n (whether it be cloud-based or on-premise kit) is a
maybe service, even if covered by contracts with service level
agreements, data loss penalty clauses etc. etc.
Ppl in the storage industry don't tend to sleep safe unless protected
data is stored in at least 3 different
JJZolx wrote:
I just tried this out today. Completely, totally, absolutely
_-useless-_.
It's so slow that it would take years (literally) to upload a large FLAC
library.
If large means more than 700GB then there's a local HD transfer
service. Just shipped mine off. :)
Offer: Fast load
numbers grow.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=93865
___
discuss
://social.microsoft.com/Forums/uk-UA/synctoy/thread/190980a7-5428-4b96-a016-53b7cb82bc4b
I'd recommend using robocopy (Windows utility) if you are OK with
command-line tools, since this has had most of the bugs ironed out and
it doesn't have the path length issue.
--
mr-b
/the-experience.php as
that looks the closest to what I want, although I'm still looking for a
bookshelf view of albums ...
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http
cool, but those old non-virtual browsing habits
die hard. ;-)
For that matter I'd like Record Shop and Old Pub Jukebox views too.
;-)
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View
There's some on ebay for £12.52 BIN from Germany - listed as Battery
for Logitech Squeezebox Duet ACCU.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http
AccurateRip.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=76870
___
discuss
Odd - since searching for anything with down returns this non-blank
error:
The following words are either very common, too long, or too short and
were not included in your search: down
--
mr-b
mr-b's Profile: http
significant added load on the servers, and
slows things down for the browser too.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=76477
I've seen this too and reported it in the forum servers downtime
thread:
http://forums.slimdevices.com/showpost.php?p=528184postcount=24
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View
Check the Audiophile forum:
http://forums.slimdevices.com/showthread.php?t=76025
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php
who have been
very responsive, helpful and fixed any issues I had.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=76559
Hi
Is there a problem with search?
I get a blank page with URL
http://forums.slimdevices.com/search.php?do=process after any type of
search.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
of devices. Copying all the functions manually
might take rather a long time so the code would be much easier.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http
Odd - some searches are fine now.
Can you try with one for all remote (without quotes)? Yes I know
these are short words etc.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread
Tx for confirming I'm not seeing things!
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=76477
of the tapered version which is missing the Browse
key
http://img.hexus.net/v2/audio/SD/Squeezebox/RemoteB.jpg
Mine is the gloss black rectangular one.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
Hi
I've just noticed that the display on my SB3 has started to flicker.
Strangely it only does this on the dimmer display levels, at full
brightness it is steady.
Is this characteristic of the display and/or PSU failing?
--
mr-b
Yup for the syntax and/or algebra fans out there I meant :
Is this characteristic of the display (and/or PSU) failing?
;)
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread
:00:00
Database Optimize ( of ) Complete 00:00:
A rescan finds the rest of the entries just fine though.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http
?
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=59160
___
discuss mailing list
discuss
ip addresses stay sticky
even after reboots. I can't recall the exact reasons for this though
...
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com
just before the SB drops off the network.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=54860
to be OK. I'll
try going back to my Linksys (WRT54GX v2) later and dig out Wireshark
(new name for Ethereal) to try to spot any smoking guns.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View
incompatibility with
renewing a DHCP lease or somesuch.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=54860
kind of Network Health page in
SC with, say, a traffic light indicator for each player and that could
do network throughput tests etc. to each)
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
are already active) but it won't work on my laptop (or its wireless
adapter), but that's another story ... :-(
So I guess it's now a matter of trial and error ...
--
mr-b
mr-b's Profile: http://forums.slimdevices.com
the wireless router (Linksys WRT54GX-v2
firmware 2.00.20) even though other wireless devices were working, and
suddenly the SB3 connected to SC just fine. It is also pingable.
Any ideas what went wrong? I really don't think that it's just the
router that's at fault here.
--
mr-b
aspects of Slimserver i.e. the
frustration of not seeing your music listed.
Is it best to log bugs or just mail support?
(I usually don't bother with the latter since they usually just tell me
to reinstall etc. so I'd hoped that ppl on the forum would chime in ...)
--
mr-b
Tx for the advice. When I get a moment I'll try the nightly and will be
sure to file a bug and report back if I still see an error.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View
. :-)
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=51902
___
discuss mailing list
(220) Error: Skipping post-process
Not updating lastRescanTime!
This worked in 7.0. Any ideas?
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com
It was the official 7.1. I tried reinstalling it and the problem seems
to have gone away - tx for the help anyway.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http
and FF3.0.1 (also tried IE).
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=50688
either.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=50688
___
discuss mailing list
*;XML;ZL*
Scanning files without extension is on.
So it should avoid *.my* files anyway. As noted previously the log
doesn't mention anything to do with SC.
I've also tried restating SC.
--
mr-b
mr-b's Profile: http
Doh - OK!
SC is logging at Error level by default for most areas so I turned up
the scan.scanner and server logging levels to Info.
Server.log:
[08-08-05 15:03:06.4108] Slim::Web::Settings::Server::Basic::handler
(68) Initiating scan of type: wipecache
Scanner.log:
Nothing recent.
--
mr-b
I set logging to debug level and got exactly the same results as
before.
And yes I did use McAfee's uninstaller app (MVSUninst.exe).
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View
Time label on the SB3 progress bar.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=50479
Playing
still shows track 2! Then I hold Fwd to scan forward a short way and
suddenly it's back playing track #2 again! This is on a SB3 and FLAC
with 90% signal.
Is this a known issue?
--
mr-b
mr-b's Profile: http
. But viewing this
in a RSS reader gives me posts from all the forums, not just GD.
The old RSS link for the GD forum was
http://test.forums.slimdevices.com/external.php?type=rss2forumids=2.
The old one for Audiophiles was
http://test.forums.slimdevices.com/external.php?type=rss2forumids=7
etc.
--
mr-b
Tx for the reply. I didn't know there had been a forum upgrade.
I tried loading a new RSS feed from this forum but that covers posts
from all the forums rather than one feed per forum - do you see the
same?
--
mr-b
mr
Hi
I reported in http://forums.slimdevices.com/showthread.php?t=49553 that
all the slim forum RSS feeds seem to be broken since 26th June and was
alerted to this thread.
Anyone know if the upgrade affected RSS?
--
mr-b
I guess nobody uses RSS then?
All my Slim RSS feeds are marked as broken since June 26th
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com
Hi
All my Slimdevices RSS feeds show that the last new posts are from the
26th June - is the RSS feed broken?
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http
folder from the
scanner. :-(
Can anyone recommend one that works with SC?
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=46781
::Class::Schema::txn_do (scanner.pl line 216)
frame 3: (eval) (scanner.pl line 216)
frame 4: main::main (scanner.pl line 345)
Any ideas what is wrong?
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid
/line-level kit?
Either way, to me it sounded like an improvement on the original PSU
and has been working fine for a few months.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread
/displayProduct.jsp?sku=PW00187
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=46409
Are there any performance issues these days when enabling encryption?
I know when I've seen wireless router perf tests in the past that it
can have a significant effect, but not seen any figures recently.
--
mr-b
mr-b's
Tx for all the details - it's working fine now!
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=35393
it) or is there something else that I need to do?
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=35393
Apart from the obvious, how are the backlit remotes different from the
SB3 originals? They look identical to me from the pics.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread
So does anyone else use RSS to monitor forum threads?
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=32579
That's a very good idea. (See what I did there? ;-) )
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=32579
are
working fine.
--
mr-b
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=32579
___
discuss
70 matches
Mail list logo
