As stated previously a single player is located at location 1, while the
other two players were 100 klm's away at location 2.
The player at location 1 was displaying the same symptoms as the two
players at location 2, as described in the first post.
The problem with player 1 resolved by
Strange, my SB3 ignores updates when set to off.
When you had the dark screen did you try the Brightness button?
--
toby10
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread:
Can now confirm the issue with one unit at least is caused by
squeezenetwork version V7.5.3.
Uninstalled V7.5.3 and installed V7.5.2 and the squeezebox classic
skipped Ethernet Appears Disconnected Please Check Your Network
Connection and worked as usual.
Then updated to V7.5.3 and the same
Your SB3 getting firmware every time it switches between MySB.com and
SBS server is normal, it is only doing what it is designed to do.
Your SBS server and MySB.com server are running two different firmware
versions and the player is detecting this difference.
You can turn this off on an SB3 by
I have used mine on static ip since 2006 ? But ocasional xilink and
factory resets have been done.
But i have also runned 7.5 beta before 7.6 so it just works ?
--
Mnyb
Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621
toby10;616677 Wrote:
Your SB3 getting firmware every time it switches between MySB.com and
SBS server is normal, it is only doing what it is designed to do.
Your SBS server and MySB.com server are running two different firmware
versions and the player is detecting this difference.
You can
I suddenly have 3 x V3 Squeezebox Classic players with this problem when
trying to connect via a wired connection.
Have had the first Squeezebox Classic for 4 or 5 years approx.
Brought a second, used Squeezebox Classic around 12 months ago.
Both have worked without a problem in the same
smithw;616402 Wrote:
I would really appreciate some suggestions from Logitech support, if
this is still at all possible, before attempting any other diagnosis.
Good summary of your problem and attempts to solve. Seems related to
the various DHCP threads started since the 7.5.3 update. By
Try static ip over ethernet my old SB3 works fine that way . and run 7.6
so the latest possible FW .
The static address should by outside the range allowed for DHCP in the
router.
(Most router has a setting to for this.)
And you have to specify all settings during the setup .
Even better if
Mnyb;616482 Wrote:
Try static ip over ethernet my old SB3 works fine that way . and run 7.6
so the latest possible FW .
The static address should by outside the range allowed for DHCP in the
router.
(Most router has a setting to for this.)
And you have to specify all settings during
Thank you for your responses. I can confirm all players and servers had
static ip assigned, and have since also tried dhcp where possible.
One issue is that after starting the squeezeboxes, setup logic is as
follows;
Select Language Set Up Networking Connect to an Ethernet Network
Ethernet
Sounds like a faulty switch to me - have you tried swapping it out?
--
Phil Leigh
You want to see the signal path BEFORE it gets onto a CD/vinyl...it
ain't what you'd call minimal...
Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF
x-dacv3/x-10/x-psu(Audiocom full mods) - Linn 5103 - full
smithw;616402 Wrote:
Purchased a third used Squeezebox Classic a couple of weeks ago and set
it up at a location 100 kilometres from the other 2 Squeezebox
Classics.
I think your problem might be solved by moving this one closer and
using a shorter network cable. ;)
--
Peter314
I've been having problems since 7.5.3.
I've reverted to 7.5.2 and now to 7.5.0 without success.
I've managed to get my SB3 playing music without dropping the
connection by ethernet cable. However, it seems that it no longer likes
my homeplugs, even though these are working fine for internet
garym;616492 Wrote:
+1. I don't see these issues (booms, transporter, Touch, Radio), but
then again ALL my devices, including the CONTROLLER have static IP
addresses and my server is static IP address.
Well...for me, the SB3 with a static IP has the problem; the Radio,
using DHCP, doesn't.
When in doubt, do an xilinx reset and reload the firmware. Can't hurt.
--
ghostrider
ghostrider's Profile: http://forums.slimdevices.com/member.php?userid=18959
View this thread:
The cables are less than one meter between the switches and the players
and there are 3 players connected to 3 totally different switches.
Thanks anyway.
Will try a xilinx reset hadnt tried that one. Will advise
--
smithw
17 matches
Mail list logo
