is obtained. You can also
make washers out of felt you can buy at fabric stores, or you can buy felt
pads for lamps at the hardware stores.
Please keep us posted on your progress.
73,
Evan, K9SQG
-Original Message-
From: Roger Smith kc6...@earthlink.net
To: drakelist drakelist
I would check the band crystal for 40 m, and band specific tuned circuits.
-Original Message-
From: Phil Rivera km...@yahoo.com
To: drakelist drakelist@zerobeat.net
Sent: Tue, Sep 17, 2013 9:55 pm
Subject: [Drakelist] R-4 PROBLEM
Hello to all,
I am having a problem with a R-4 I just
exactly what you need within
driving distance.
Have a great weekend.
73,
Evan, K9SQG
-Original Message-
From: Jim DiMauro radio6...@yahoo.com
To: Drakelist drakelist@zerobeat.net
Sent: Fri, Sep 13, 2013 10:38 pm
Subject: [Drakelist] Wanted: L-7
Hi All:
I'm looking to buy
. A
compromise antenna in the air works a lot better than the perfect antenna
design on paper. Enjoy the experimentation, and enjoy the hobby. Please share
your experiences with others.
73,
Evan, K9SQG
-Original Message-
From: Damien Mannix damienman...@hotmail.com
To: drakelist drakelist
.
Let's all enjoy the hobby!
73,
Evan, K9SQG
-Original Message-
From: Stan Nafziger kf4...@gmail.com
To: K9sqg k9...@aol.com
Cc: damienmannix damienman...@hotmail.com; Drakelist drakelist@zerobeat.net
Sent: Wed, Sep 11, 2013 11:46 am
Subject: Re: [Drakelist] MN-2700/B-1000 use
John,
Just contact k9...@arrl.net about a replacement. He can also replace it for
you although it is not a particularly difficult task.
73,
Evan, K9SQG
-Original Message-
From: John Meyer jome...@msn.com
To: drakelist drakelist@zerobeat.net
Sent: Wed, Sep 11, 2013 3:18 pm
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
You are cordially invited to attend...
The Drake Forum
Saturday, May 18, 2013.
10:30-11:30 AM.
Room 2.
Excellent presentations.
Ask the Experts QA.
Free collectable Drake logo pens for first 100 attendees.
Free raffle tickets.
Many prizes including new, dual band, HT.
More details under
Ski,
At one time I believe I saw a picture one of those on the WB4HFN website
devoted to Drake gear. I believe some third party vendor was making them but
can't remember who.
73,
Evan, K9SQG
-Original Message-
From: Fred or Ski wb8...@frontier.com
To: drakelist drakelist
KC9YS per the information listed on the WB4HFN website...
-Original Message-
From: Paul pa...@hal-pc.org
To: drakelist drakelist@zerobeat.net
Sent: Mon, Apr 22, 2013 9:05 pm
Subject: [Drakelist] Aluminum disk insert for TR-7 mode switch and band switch
knobs
Any one know where I can
output of an audio amp, sometimes the distortion level
becomes annoying. Your results might vary.
Enjoy those Drakes.
73,
Evan, K9SQG
-Original Message-
From: Charles Ring w...@roadrunner.com
To: Bob Loving bob.lov...@sbcglobal.net
Cc: drakelist drakelist@zerobeat.net
Sent: Tue
!
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
,
Evan, K9SQG
-Original Message-
From: GALE STEWARD k...@yahoo.com
To: Drake Reflector drakelist@zerobeat.net
Sent: Tue, Feb 19, 2013 1:34 pm
Subject: [Drakelist] L4 Plate Meter
I have suspected for a number of years that the plate meter in my L4 was
reading a bit low. Today I had the amp
Team,
Word from the Hamvention Forum Committee:
Scheduled DRAKE forum as follows:
Saturday
Time: 1030 to 1130
Room: #2
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo
and insured to your door, continental
US only.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
For Sale:
DX Engineering speech processor, LC-2-T4X for Drake, withinstructions. $100.
Drake 1525EM encoder microphone, new with box, $50.
Drake 7073, dynamic mobile mic, $25.
Shipping and insurance are extra. Thanks for reading the ad.
73,
Evan, k9...@arrl.net
Fellow Drake Enthusiasts,
I have the following for sale in the Continental US only:
DX Engineering speech processor, LC-2-T4X for Drake, withinstructions. $100.
Drake 1525EM encoder microphone, new with box, $50.
Drake 7073, dynamic mobile mic, $25.
Drake line filter, LF2, model
be
inspected for heating or open circuit.
73,
Evan, K9SQG
-Original Message-
From: Curt Nixon cptc...@flash.net
To: drakelist drakelist@zerobeat.net
Sent: Fri, Jan 4, 2013 12:34 pm
Subject: Re: [Drakelist] Drake L7E Low Power Out
Can he use a different wattmeter
Fellow Drake Enthusiasts,
I would like to take this opportunity to say Merry Christmas and Happy New
Year. I hope that you will be blessed with good health, happiness, and that
your Drake dreams will be fulfilled.
73,
Evan, K9SQG
___
Drakelist
Is the issue of frequency accuracy, plus stability, not a consideration when
attempting 60 meter operation with a 4-line? Changing PTO frequency would
still result in one having to deal with accuracy and stability issues which,
for channelized operation, are more critical. Just some random
, preferably new, please let me know full, shipped
price.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
for is the willingness of Drake enthusiasts to
share experiences, offer help and encouragement, and do whatever is needed to
keep the Drake part of our ham radio hobby working to the highest levels of
performance. Have a safe, enjoyable holiday.
73,
Evan, K9SQG
Yep, Garey's CDs are worth their weight in gold!
-Original Message-
From: Chris Kepus cke...@comcast.net
To: drakelist drakelist@zerobeat.net
Cc: nm5m n...@aol.com
Sent: Sat, Nov 17, 2012 12:20 pm
Subject: [Drakelist] pictorial of the bottom of an R4C
“I am curious if anyone on the
With time or temperature related problems, I've found that freeze spray or even
computer dusting spray can be useful for locating defective resistors and
capacitors.
Enjoy those Drakes.
73,
Evan, K9SQG
-Original Message-
From: kc9cdt kc9...@aol.com
To: captcurt captc
Damien,
Glad things are working there and educating us on what the issue was.
73,
Evan, K9SQG
-Original Message-
From: Damien Mannix damienman...@hotmail.com
To: drakelist drakelist@zerobeat.net
Sent: Thu, Oct 4, 2012 12:16 pm
Subject: [Drakelist] All is well
Hi all,
How time
, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
each plus shipping.
The filter on the filter board is $75.
Thanks for reading the ad.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Fellow enthusiasts,
Here is an update on my recent posting about filters.
The 8 kc is gone.
The 1.8 kc is gone.
Remaining:
500 hz CW filter.
2.3 kc stock filter.
2.3 kc stock filter mounted to new board.
Thanks for the great response.
73,
Evan, K9SQG
-Original Message
on the rear. Too, see if any screws
are missing from any of the places where subassemblies are held together, etc.
Please keep the group posted we all can learn from it.
73,
Evan, K9SQG
-Original Message-
From: Roger White rwhitete...@verizon.net
To: drakelist drakelist
Some dealers specialize in LEDs for the Drake equipment
__,_._,__
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Radiolabworks is the best source of LEDs for Drake gear in my opinion but I
don't have experience with all of the dealers...
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Dan,
If it were me, not being an expert, I would start by sparingly applying DeOxit
to switch contacts, and look into the 15 meter crystal that might have aged
beyond being usable.
73,
Evan, K9SQG
-Original Message-
From: K3XR k...@comcast.net
To: drakelist drakelist
to add a white line to, I'd prefer to have an
original knob if at all possible. If you have one, please let me know the
condition, cost, and mailing expenses.
Enjoy those Drakes!
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http
the two
68 pf caps, etc. and then retune the input coil per the instructions. In the
other case, adding the 68 pf caps is not necessary, and the input coil doesn't
always need to be adjusted. Both procedures seem to work, depending...
73,
Evan, K9SQG
-Original Message-
From
SSB filter made by Sherwood
Engineering. $100 plus shipping.
Can only ship these to continental US only. Payment must be via USPS money
order or PayPal.
Thanks for reading the posting.
73,
Evan, K9SQG
___
Drakelist mailing list
Steve,
Have you tried the online manuals at WB4HFN?
73,
Evan
-Original Message-
From: Steve sswh...@mchsi.com
To: Drakelist Drakelist@zerobeat.net
Sent: Sun, Jun 3, 2012 9:46 pm
Subject: [Drakelist] Drake 2B Capacitor value
I am working on bringing back to life a 2B and am
, no rain for the weekend.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
. Come early so you can get a seat.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
the WB4HFN website and look up the
various parts sources listed there.
73,
Evan, K9SQG
-Original Message-
From: w7apm w7...@mtaonline.net
To: drakelist drakelist@zerobeat.net
Sent: Wed, May 9, 2012 12:48 pm
Subject: [Drakelist] Want small 4-line bar knob
Looking for an exact copy
with those of the 10DA.
Hope to see you at the Drake Forum at this year's Hamvention. 10:30-11:30,
Saturday, Room 2. Interesting presentations and free door prizes including
Drake memorabilia.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist
, Transient Arrester, Model 1549. It goes in series with the
antenna lead to your rig, and has a large bolt for connecting to a ground rod,
etc., $25 shipped, continental US only.
Keep enjoying those Drake radios!
73,
Evan, K9SQG
___
Drakelist mailing
Gentleman,
The step-start has been sold but the antenna surge suppressor is still
available. Thanks for all the inquiries, wish I had more.
73,
Evan
-Original Message-
From: K9sqg k9...@aol.com
To: drakelist drakelist@zerobeat.net
Sent: Fri, Mar 23, 2012 10:47 pm
Subject
, I'm
interested. Please contact me off-list with details.
Enjoy those Drakes.
73,
Evan, K9SQG
k9...@arrl.net
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Typically this is due to low line voltage or a HV meter circuit that needs to
be recalibrated.
73,
Evan, K9SQG
-Original Message-
From: hs0zju hs0...@gmail.com
To: drakelist drakelist@zerobeat.net
Sent: Mon, Feb 20, 2012 10:52 am
Subject: [Drakelist] low plate voltgage l4b
I
,
Evan, K9SQG
-Original Message-
From: GALE STEWARD k...@yahoo.com
To: Dino Papas k...@cox.net; Mail List - Drake Gear Drake Gear
drakelist@zerobeat.net
Sent: Mon, Feb 20, 2012 10:29 am
Subject: Re: [Drakelist] L-4B/L7 Power Supply Rebuilds
A timely question about the L4/L7
Rick,
Definitive statements can't be made unless the plate voltage meter is known to
be in calibration and/or an external meter used to verify its accuracy.
73,
Evan, K9SQG
-Original Message-
From: richard radke rar...@excite.com
To: drakelist drakelist@zerobeat.net
Sent
As a side note, a properly wired L4, L4B, or L7 power supply chassis is ALWAYS
at ground potential for safety reasons. The safety ground from the outlet goes
directly to the chassis of the power supply, whether or not the RF deck is
plugged into it or not.
A number of years ago, there was a
seen in 30 except the ones I have in stock.
Enjoy those Drakes, the Drake Nets, and our hobby.
73,
Evan, K9SQG
-Original Message-
From: Dino Papas k...@cox.net
To: Mail List - Drake Gear Drake Gear drakelist@zerobeat.net
Sent: Sat, Feb 18, 2012 2:24 pm
Subject: [Drakelist] L-4B/L7
put Challenge Met Scholarship. My QTH is
good on QRZ, QTH, etc.
Thanks for reading the email and enjoy those Drakes.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Would the ham that contacted me about modules for the AUX-7 board contact me
directly? Seems AOL (Almost On Line) deleted some emails, hi hi.
Thanks,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net
Met Scholarship.
Thanks for reading the email.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Here is where a can of freeze spray can sometimes serve to help with
diagnostics. I serviced a Collins 516F2 power supply used with a KWM-2 and
found that the molded socket for one of the rectifiers had an internal short
that could not be seen from the outside.
-Original Message-
I use a whitening stick avaiable, I believe, from Antique Electronic Supply.
You make sure the knob is clean, including the white line area, then you rub
the stick over the indentation, wipe off the excess, and there you are!
-Original Message-
From: m coffey r79b...@gmail.com
To:
Fellow Drake Enthusiasts,
Have for sale an AUX-7 board. $60 shipped to your door via Priority Mail. Can
only ship to lower 48 states. Payment can be via PayPal or USPS money order.
Enjoy those Drakes.
73,
Evan, K9SQG
___
Drakelist mailing
to the linear.
Drake always seemed to have good reasons for what they did but this one has me
puzzled, hi hi...
73,
Evan, K9SQG
-Original Message-
From: Garey Barrell k4...@mindspring.com
To: Ron wd8...@yahoo.com
Cc: drakelist drakelist@zerobeat.net
Sent: Sat, Jan 28, 2012 9:37 am
for Drake linears.
Enjoy those Drakes.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
equipment, etc.
that is made by GC. As with any cleaner, proceed with caution and test a
hidden area to see if the cleaner is compatible with the plastic.
Might have some added tips in the WB4HFN Drake website or Electric Radio
magazine.
73,
Evan, K9SQG
-Original Message-
From
As a side note, the narrower the passband of the filter(s) the more critical is
the alignment of the transmitter in most rigs...
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
the fan.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
in the power supply.
Those are the main differences to my limited knowledge.
73,
Evan, K9SQG
-Original Message-
From: m coffey r79b...@gmail.com
To: drakelist drakelist@zerobeat.net
Sent: Thu, Jan 12, 2012 5:17 pm
Subject: [Drakelist] L4 vs. L4B
Can anyone tell me the difference
is. I have two other L7s that operate
flawlessly so I'm still on the air but I like to keep my gear in proper
operating condition if possible.
Enjoy those Drakes! And don't forget the Drake HF nets.
73,
Evan, K9SQG
___
Drakelist mailing list
Another approach I've found to work well is to use a 220 v fan that will start
reliably and run consistently. Super quiet!
73,
Evan, K9SQG
-Original Message-
From: Michael Kelly mkell...@gmail.com
To: drakelist drakelist@zerobeat.net
Sent: Sun, Jan 8, 2012 4:57 pm
Subject
To see if there are filament problems, I have found that attaching flea clips
to the filament wires (not pins) and running leads outside the amp to a vtvm or
vom is a way to see if there is a problem in the filament circuit. Since high
voltage is involved, this is NOT something a novice should
Heil does indeed sell cartridges and microphones. HOWEVER, it is only at the
Dayton Hamvention to my knowledge. The full product line is available from
authorized dealers. I've had very favorable experiences with Heil and I hope
everybody else does too.
73,
Evan, K9SQG
-Original
Fellow Drake Enthusiasts,
The Harbach Soft Key has been sold. Thanks for all the interest. I wish I had
more for everybody.
Enjoy those Drakes.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net
the posting. Enjoy those Drakes!
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
hour and needed 18-24 hours to
stabilize; too, some never stabilized.
Enjoy those Drakes. And don't forget the Drake nets...
73,
Evan, K9SQG
-Original Message-
From: Eddy Swynar deswy...@xplornet.ca
To: drakelist drakelist@zerobeat.net
Sent: Fri, Nov 25, 2011 9:33 am
Subject
Please be aware that all the mods at that website are not necessarily
advisable, because of damage to the equipment, compromised safety, or
ineffective results. I've gave up on that website when I saw things like
remove the heat from the L4B power supply by taking the 50K 50 wt resistors
out
My experience is that the independently owned hardware stores where I live
actually sell surgical tubing in a few sizes.
-Original Message-
From: Garey Barrell k4...@mindspring.com
To: Allen Bush adb66...@yahoo.com
Cc: drakelist drakelist@zerobeat.net
Sent: Wed, Nov 16, 2011 5:18 pm
I'm sure there are others but the best in my opinion are...
Jeff, WA8SAJ
Ron, WB4HFN
John Kriner (the Man) in Middletown, Ohio.
Specifics on the above and others are on the WB4HFN Drake website.
-Original Message-
From: Daniel Wright dwrigh...@neb.rr.com
To: drakelist
the article that is
out on the Internet. I have it but don't have time right now to post the link
or reference. Removing the bandswitch shaft is necessary to do this properly.
4. Adjust the 15 meter input coil as warranted.
73,
Evan, K9SQG
-Original Message-
From: Woody ko4...@gmail.com
10Meter%20Adaptation%20for%20Drake%20L7,%20Drake,%20tr4,%20tr7,%20drake%20radio,%20drake%20receiver,%20drake%20transceiver,%20ham%20radio%20equipment,%20ham%20radio%20receivers,%20radio%20equipment.webarchive___
Drakelist mailing list
, one for current, and
one for power in watts. It is easy to see that when the ammeter increase at
about the same amount as the voltage, you readily know there is a problem and
not to proceed until fault isolation has been completed.
73,
Evan, K9SQG
-Original Message-
From: Neil M
Considering how easy it is to build a tuner for 160, even a double balanced one
for open wire feedline, not sure who would want to butcher a classic tuner and
lower the value by 50%. Then again, that happens frequently when you see all
the pilot lights, switches, repaints, etc. of vintage gear
Ron,
It doesn't matter. When you call International Crystal, you just tell them
what crystal from what radio and they have all the specs.
73,
Evan, K9SQG
-Original Message-
From: Ron Ries rr...@xmission.com
To: drakelist drakelist@zerobeat.net
Sent: Sun, Oct 2, 2011 12:35 pm
Automobile headlamps, in parallel (high and low beam), battery load testers for
automobile batteries, come to mind...
-Original Message-
From: Ron wd8...@yahoo.com
To: drakelist drakelist@zerobeat.net
Sent: Mon, Sep 19, 2011 2:47 pm
Subject: [Drakelist] Drake PS-7 test ideas
I
I have owned several FS-4s over the years but do not have any now. The FS-4
can be considered as stable as a crystal BUT it does not add anything to
overall stability to the R4C, for example. Why? The main part that
contributes to drift is the PTO so whether one uses and FS-4 or plug in
, well, times are a changing...
Enjoy that Drake gear.
73,
Evan, K9SQG
-Original Message-
From: Steve Wedge w1es1...@earthlink.net
To: captcurt captc...@flash.net
Cc: drakelist drakelist@zerobeat.net
Sent: Tue, Sep 6, 2011 8:33 am
Subject: Re: [Drakelist] What would you do?
Thanks
Not sure what the conflict is. Having a fan pull hot air out of the cabinet is
good for the finals, and frequency stability.
-Original Message-
From: Henry Foglesong hwfogles...@gmail.com
To: drakelist drakelist@zerobeat.net
Sent: Mon, Aug 22, 2011 7:46 pm
Subject: [Drakelist]
I buy all my crystals from International Crystal. Just tell them the
frequency, what it is going to be used in, and they have all the data. Comes
with a lifetime guarantee and all my orders have arrived sooner than what they
quoted.
73,
Evan, K9SQG
-Original Message-
From
At one time, there seemed to be great interest in the L-4B because it could run
1 kw input on CW, RTTY, and AM. A lot of other amps were rated at, for example
1,500 watts input on SSB but maybe only 700 or so on AM because they didn't
have power supplies, cooling, etc. for continuous duty or
My experiences have been 100% positive. Tony is a nice guy that does great
work.
73,
Evan, K9SQG
-Original Message-
From: Henry Foglesong hwfogles...@gmail.com
To: drakelist drakelist@zerobeat.net
Sent: Fri, Aug 12, 2011 9:21 pm
Subject: [Drakelist] Drake front panels
Has
There is a slight addendum that I believe should be added to the traditional
belief that antennas need to be physically separated in order to use them for
diversity reception. While I agree with the statement for identical antennas,
it does not necessarily hold for dissimilar antennas. Why?
I've found that any antenna, tower, rotor, etc. device used outdoors can
benefit from the use of stainless steel hardware, nylon insert locknuts as
appropriate. You can buy it online at a price, including shipping, that is
less than what you can buy locally for standard, plated hardware.
I did see Ray Grenier at the 2011 Hamvention as we passed each other in an
aisle but before I could turn around and get caught up he was gone. He did
look happy, then again, it WAS Hamvention after all...
___
Drakelist mailing list
and output isn't quite right, then you know not
to proceed until a problem is found. What can really help is to tune up into a
dummy load first, then go to the real world.
Enjoy those Drakes and don't forget the Drake nets.
73,
Evan, K9SQG
-Original Message-
From: ron ronc
prefer, premade cables can
be obtained at the WB4HFN website and elsewhere.
Welcome back to Drakes!
73,
Evan, K9SQG
-Original Message-
From: Woody ko4...@gmail.com
To: Drakelist Drakelist@zerobeat.net
Sent: Mon, Aug 1, 2011 8:11 am
Subject: [Drakelist] R4B T4XB hook up question
for one power supply, shipped USPS
priority mail to your door for $10, lower 48 states only. Alaska and Hawaii
would require extra shipping but not sure how much. I am unable to ship to any
foreign country regardless of location.
Enjoy those Drakes.
73,
Evan, K9SQG
situation. I hope this is an isolated situation and it serves to remind us
that when there is a problem like this, shutting things down quickly is the
best course of action.
Enjoy those Drakes.
73,
Evan, K9SQG
___
Drakelist mailing list
Mu metal can be found in some old TVs (not all), oscilloscopes, etc. at low to
free prices...
-Original Message-
From: Paul Christensen w...@arrl.net
To: Drakelist group drakelist@zerobeat.net
Sent: Wed, Jul 6, 2011 7:26 am
Subject: [Drakelist] R-4C Power Transformer Rotation
As
Woody,
I've heard of numerous people using the D-104 with the TR-7 as discussed on the
Drake nets. Values I've heard range from 470K to 1.3 meg in series with the
mic hot lead. If there is a speech pre-amp in the mic, it should not be used.
73,
Evan, K9SQG
-Original Message
.
Enjoy using those Drakes and don't forget the Drake nets.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Fellow enthusiasts,
Thanks for all the nice emails. Wish I had a hundred kits available for all
the Drake enthusiasts.
Have a safe, enjoyable, holiday weekend. Please remember the price that has
been paid for our freedom.
73,
Evan, K9SQG
equipment. If you are inexperienced or have any
doubts, this kit is NOT for you. Price is $65 shipped to your door, 48 states
only, not Alaska, Hawaii, Canada, Mexico, nor overseas.
Thanks for reading this posting and enjoy that Drake gear.
73,
Evan, K9SQG
Rebuild kits are available from Hayseed Electronics and the Heathkit Shop.
-Original Message-
From: Michael Sue Trussell mtruss8...@comcast.net
To: drakelist@zerobeat.net
Sent: Sat, Jun 25, 2011 12:47 am
Subject: [Drakelist] AC4 power supply rebuild!
Forgot to ask about the AC4
WA8SAJ, WB4HFN, and John Kriner, come to mind...
-Original Message-
From: Hal Dale wb4...@yahoo.com
To: Drakelist@zerobeat.net Drakelist@zerobeat.net
Sent: Fri, Jun 17, 2011 8:20 am
Subject: [Drakelist] TR6
Are there any TR6 Guru's out there. I have a issue with mine I need to
Have a manual for the Drake MN-2000 for sale. $15 shipped to your door,
continental US only.
Enjoy those Drakes.
73,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
. parallel to each other with no obvious
bends, and that the adjustment of the fixed plates has not shifted. Typically
the fixed plates are adjustable while the movable ones are not. Note too that
dust or dirt can get the arc going too.
Keep us posted.
73,
Evan, K9SQG
-Original
, we will make an announcement as to the availability
of the video either online, via CD/DVD, or both.
Until next Hamvention, enjoy those Drakes!
For the Drake Forum committee,
Evan, K9SQG
___
Drakelist mailing list
Drakelist@zerobeat.net
http
Yes, that is the time and location. Free door prizes, several presentations,
etc. per the listing on the Hamvention website.
Safe trip Drake enthusiasts
-Original Message-
From: Ron wd8...@yahoo.com
To: drakelist@zerobeat.net; kevin Elliott kellio...@qwest.net
Sent: Mon, May
1 - 100 of 446 matches
Mail list logo
