On Mon, Apr 1, 2019 at 2:12 PM Robin Murphy wrote:
>
> On 01/04/2019 08:47, Rob Herring wrote:
> > This adds the initial driver for panfrost which supports Arm Mali
> > Midgard and Bifrost family of GPUs. Currently, only the T860 and
> > T760 Midgard GPUs have been tested.
>
> FWIW, on an antique
On Tue, Apr 2, 2019 at 8:24 AM Brian Masney wrote:
>
> On Tue, Apr 02, 2019 at 07:56:55AM -0500, Dan Murphy wrote:
> > This would connect control bank B to control bank A. Or just use a flag to
> > denote to connect them
> > and not use led-sources. But led-sources is the property of choice.
>
On Thu, 14 Mar 2019 at 18:07, Boris Brezillon
wrote:
>
> On Thu, 28 Feb 2019 15:49:07 +0100
> Daniel Vetter wrote:
>
> > The lessor is invariant over a lifetime of a lease, we don't have to
> > grab any locks for that. Speeds up the common case of not being a lease.
> >
> > Cc: Keith Packard
>
https://bugs.freedesktop.org/show_bug.cgi?id=110258
--- Comment #2 from Ethan ---
I am experiencing the exact same issue on my Dell Inspiron 3185 with a Stoney
Ridge A9-9420e. I have tried multiple kernels and distributions and I
experience the same freeze as described on resume from suspend. (I
Indeed not that important, so patch 5&7 is:
Reviewed-and-tested-by: Qiang Yu
Regards,
Qiang
On Wed, Apr 3, 2019 at 12:57 AM Eric Anholt wrote:
>
> Qiang Yu writes:
>
> > On Tue, Apr 2, 2019 at 6:26 AM Eric Anholt wrote:
> >>
> >> I haven't tested this, but it's a pretty direct port of what I
v3: Fix up drmP and IRQ flag, thanks Sam
v2: Address review from Noralf and Daniel, add maintainers patch
This driver is for the ASPEED BMC SoC's GFX display hardware. This
driver runs on the ARM based BMC systems, unlike the ast driver which
runs on a host CPU and is is for a PCIe graphics
This driver is for the ASPEED BMC SoC's GFX display hardware. This
driver runs on the ARM based BMC systems, unlike the ast driver which
runs on a host CPU and is is for a PCI graphics device.
Signed-off-by: Joel Stanley
Acked-by: Daniel Vetter
Reviewed-by: Noralf Trønnes
Reviewed-by: Sam
This hardware is found inside ASPEED Baseboard Management Controller
(BMC) system on chips. It is called the 'SOC Display Controller' or 'GFX'.
Signed-off-by: Joel Stanley
---
MAINTAINERS | 8
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index
This describes the ASPEED BMC SoC's display controller.
Signed-off-by: Joel Stanley
Reviewed-by: Andrew Jeffery
---
v3:
Add Andrew's reviewed-by
.../devicetree/bindings/gpu/aspeed-gfx.txt| 41 +++
1 file changed, 41 insertions(+)
create mode 100644
On Tue, 2 Apr 2019 at 06:26, Sam Ravnborg wrote:
>
> Hi Joel
>
> > index ..fb56e425bd48
> > --- /dev/null
> > +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> > @@ -0,0 +1,104 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +// Copyright 2018 IBM Corporation
> > +
> > +#include
> >
On 4/2/19 2:52 PM, Manasi Navare wrote:
Some eDP 1.4 panels cannot use the optimized fast and narrow pipe
config approach, but they need to use th maximum supported lane count
for the link training to succeed.
There is a DRM EDID quirk for such panels that gets set after reading
their
On 4/2/19 2:52 PM, Manasi Navare wrote:
For certain eDP 1.4 panels, we need to use max lane count for the
link training to succeed.
This patch adds a EDID quirk for such eDP panels using
their vendor ID and product ID to force using max lane count in the driver.
Cc: Clint Taylor
Cc: Ville
Some eDP 1.4 panels cannot use the optimized fast and narrow pipe
config approach, but they need to use th maximum supported lane count
for the link training to succeed.
There is a DRM EDID quirk for such panels that gets set after reading
their corresponding EDID.
So if it is set, this patch
For certain eDP 1.4 panels, we need to use max lane count for the
link training to succeed.
This patch adds a EDID quirk for such eDP panels using
their vendor ID and product ID to force using max lane count in the driver.
Cc: Clint Taylor
Cc: Ville Syrjälä
Tested-by: Albert Astals Cid
https://bugzilla.kernel.org/show_bug.cgi?id=201497
Daniel Andersson (engyw...@gmail.com) changed:
What|Removed |Added
Kernel Version|4.19 4.20 5.0-rc1 5.0-rc3 |4.19 4.20 5.0-rc1
On Mon, Apr 1, 2019 at 6:41 PM Tom Li wrote:
>
> On Sun, Mar 31, 2019 at 08:08:01PM +0100, Sudip Mukherjee wrote:
> > Technically I donot have any problem with this, you seem to know more
> > about SM712 than I know. But Teddy Wang is also an existing maintainer
> > and I think there should be an
On Mon, Apr 1, 2019 at 6:30 PM Tom Li wrote:
>
> On Sun, Mar 31, 2019 at 07:54:28PM +0100, Sudip Mukherjee wrote:
> > On Fri, Mar 22, 2019 at 01:17:57PM +0800, Yifeng Li wrote:
> > > +video controllers. This series of video controller is a legacy from
> > > ~1998,
> > > +and was used on many
On Mon, Apr 1, 2019 at 5:42 PM Tom Li wrote:
>
> On Sun, Mar 31, 2019 at 07:33:33PM +0100, Sudip Mukherjee wrote:
> > Why are you removing existing functionality from the driver? These are
> > supported but were never listed so could not be used. I think you can
> > just add these to
On Mon, Apr 1, 2019 at 5:26 PM Tom Li wrote:
>
> On Sun, Mar 31, 2019 at 07:09:47PM +0100, Sudip Mukherjee wrote:
> > On Fri, Mar 22, 2019 at 01:17:55PM +0800, Yifeng Li wrote:
> > I didnot notice any performace improvement in my system. Infact, I have
> > never seen the performance problem that
On Tue, Apr 02, 2019 at 02:09:45PM +0200, Daniel Vetter wrote:
> On Mon, Apr 1, 2019 at 4:00 PM Bartlomiej Zolnierkiewicz
> wrote:
> >
> >
> > On 03/14/2019 12:45 PM, Gerd Hoffmann wrote:
> > > Simply add all pci memory bars to struct apertures_struct in
> > >
Hi Uma.
Some kerneldoc nits below.
Sam
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -599,6 +599,13 @@ struct drm_connector_state {
>* and the connector bpc limitations obtained from edid.
>*/
> u8 max_bpc;
> +
> + /**
> + *
Hi Uma.
Noticed a kerneldoc nit while browsign the code.
Maybe try to let kernel doc tell you if there are more.
Sam
>
> /**
> + * drm_hdmi_infoframe_set_hdr_metadata() - fill an HDMI AVI infoframe with
> + * HDR metadata from userspace
> + *
Enable writing of HDR metadata infoframe to panel.
The data will be provid by usersapace compositors, based
on blending policies and passsed to driver through a blob
property.
v2: Rebase
v3: Fixed a warning message
v4: Addressed Shashank's review comments
v5: Rebase. Added infoframe
HDR metadata requires a infoframe to be set. Due to fastset,
full modeset is not performed hence adding it to update_pipe
to handle that.
Signed-off-by: Uma Shankar
Reviewed-by: Shashank Sharma
---
drivers/gpu/drm/i915/intel_ddi.c | 13 +
1 file changed, 13 insertions(+)
diff
This patch enables modeset whenever HDR metadata
needs to be updated to sink.
v2: Addressed Shashank's review comments.
Signed-off-by: Ville Syrjälä
Signed-off-by: Uma Shankar
---
drivers/gpu/drm/i915/intel_atomic.c | 14 +-
drivers/gpu/drm/i915/intel_hdmi.c | 9 +
2
From: Ville Syrjälä
This patch enables infoframes on GLK+ to be
used to send HDR metadata to HDMI sink.
v2: Addressed Shashank's review comment.
v3: Addressed Shashank's review comment.
Signed-off-by: Ville Syrjälä
Signed-off-by: Uma Shankar
---
drivers/gpu/drm/i915/i915_reg.h | 4
This patch series enables HDR support in drm. It basically defines
HDR metadata structures, property to pass content (after blending)
metadata from user space compositors to driver.
Dynamic Range and Mastering infoframe creation and sending.
ToDo:
1. We need to get the color framework in place
HDR metadata block is introduced in CEA-861.3 spec.
Parsing the same to get the panel's HDR metadata.
v2: Rebase and added Ville's POC changes to the patch.
v3: No Change
v4: Addressed Shashank's review comments
v5: Addressed Shashank's comment and added his RB.
Signed-off-by: Uma Shankar
From: Ville Syrjälä
ADD HLG EOTF to the list of EOTF transfer functions supported.
Hybrid Log-Gamma (HLG) is a high dynamic range (HDR) standard.
HLG defines a nonlinear transfer function in which the lower
half of the signal values use a gamma curve and the upper half
of the signal values use a
Attach HDR metadata property to connector object.
v2: Rebase
v3: Updated the property name as per updated name
while creating hdr metadata property
Signed-off-by: Uma Shankar
Reviewed-by: Shashank Sharma
---
drivers/gpu/drm/i915/intel_hdmi.c | 2 ++
1 file changed, 2 insertions(+)
diff
Enable Dynamic Range and Mastering Infoframe for HDR
content, which is defined in CEA 861.3 spec.
The metadata will be computed based on blending
policy in userspace compositors and passed as a connector
property blob to driver. The same will be sent as infoframe
to panel which support HDR.
This patch adds a blob property to get HDR metadata
information from userspace. This will be send as part
of AVI Infoframe to panel.
It also implements get() and set() functions for HDR output
metadata property.The blob data is received from userspace and
saved in connector state, the same is
When the logo is currently drawn on a virtual console, and the console
loglevel is reduced to quiet, logo_shown must be left alone, so that it
the scrolling region on that virtual console is properly reset.
Fixes: 10993504d647 ("fbcon: Silence fbcon logo on 'quiet' boots")
Signed-off-by: Andreas
On 2019-04-02 10:37 a.m., Andrey Konovalov wrote:
> On Mon, Mar 25, 2019 at 11:21 PM Kuehling, Felix
> wrote:
>> On 2019-03-20 10:51 a.m., Andrey Konovalov wrote:
>>> This patch is a part of a series that extends arm64 kernel ABI to allow to
>>> pass tagged user pointers (with the top byte set
On Apr 02 2019, Prarit Bhargava wrote:
> On 4/1/19 3:31 PM, Andreas Schwab wrote:
>> On Jan 29 2019, Prarit Bhargava wrote:
>>
>>> @@ -1066,6 +1069,9 @@ static void fbcon_init(struct vc_data *vc, int init)
>>>
>>> cap = info->flags;
>>>
>>> + if (console_loglevel <=
On 01/04/2019 17:06, Liviu Dudau wrote:
On Fri, Mar 29, 2019 at 06:46:21PM +, Robin Murphy wrote:
On 19/03/2019 14:49, Liviu Dudau wrote:
On Tue, Mar 19, 2019 at 01:14:54PM +, Robin Murphy wrote:
[ +Sudeep - just FYI ]
Hi Liviu,
On 27/02/2019 09:40, Liviu Dudau wrote:
Hi Robin,
On 2019-04-02 10:29 a.m., Paul E. McKenney wrote:
> Having DEFINE_SRCU() or DEFINE_STATIC_SRCU() in a loadable module
> requires that the size of the reserved region be increased, which is
> not something we really want to be doing. This commit therefore removes
> the DEFINE_STATIC_SRCU() from
Hi Dave, Daniel,
Same pull as last week, but with a warning fix on top.
The following changes since commit fbac3c48fa6b4cfa43eaae39d5a53269bff7ec5f:
Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into
drm-next (2019-02-22 15:56:42 +1000)
are available in the Git
Qiang Yu writes:
> On Tue, Apr 2, 2019 at 6:26 AM Eric Anholt wrote:
>>
>> I haven't tested this, but it's a pretty direct port of what I did for
>> v3d.
>>
>> Signed-off-by: Eric Anholt
>> ---
>> drivers/gpu/drm/lima/lima_gem.c | 37 +
>> drivers/gpu/drm/lima/lima_sched.c |
On Tue, Apr 02, 2019 at 06:05:48PM +0200, Daniel Vetter wrote:
> On Tue, Apr 2, 2019 at 3:24 PM Sean Paul wrote:
> >
> > On Tue, Apr 02, 2019 at 09:49:00AM +0200, Daniel Vetter wrote:
> > > On Mon, Apr 01, 2019 at 09:49:30AM -0400, Sean Paul wrote:
> > > > On Fri, Mar 29, 2019 at 08:21:31PM
On Tue 2019-04-02 08:45:40, Dan Murphy wrote:
> Hello
>
> On 4/1/19 5:30 AM, Brian Masney wrote:
> > Add device tree support to the lm3630a driver and allow configuring
> > independently on both banks the mapping mode (linear or exponential),
> > initial and maximum LED brightness.
> >
> >
https://bugzilla.kernel.org/show_bug.cgi?id=200695
Claude Heiland-Allen (cla...@mathr.co.uk) changed:
What|Removed |Added
Kernel Version|4.17.19, 4.18.5 through |4.17.19,
https://bugzilla.kernel.org/show_bug.cgi?id=200695
--- Comment #31 from Claude Heiland-Allen (cla...@mathr.co.uk) ---
Created attachment 282101
--> https://bugzilla.kernel.org/attachment.cgi?id=282101=edit
dmesg logs after booting to X with displays connected to both DVI and HDMI
Good news:
>-Original Message-
>From: dri-devel [mailto:dri-devel-boun...@lists.freedesktop.org] On Behalf Of
>Ville
>Syrjälä
>Sent: Friday, March 29, 2019 7:35 PM
>To: Shankar, Uma
>Cc: Syrjala, Ville ; liviu.du...@arm.com; intel-
>g...@lists.freedesktop.org; emil.l.veli...@gmail.com; dri-
On Tue, Apr 02, 2019 at 07:29:31AM -0700, Paul E. McKenney wrote:
> Having DEFINE_SRCU() or DEFINE_STATIC_SRCU() in a loadable module
> requires that the size of the reserved region be increased, which is not
> something we really want to be doing. This commit therefore removes
> the
On Tue, Apr 2, 2019 at 3:24 PM Sean Paul wrote:
>
> On Tue, Apr 02, 2019 at 09:49:00AM +0200, Daniel Vetter wrote:
> > On Mon, Apr 01, 2019 at 09:49:30AM -0400, Sean Paul wrote:
> > > On Fri, Mar 29, 2019 at 08:21:31PM +0100, Daniel Vetter wrote:
> > > > On Fri, Mar 29, 2019 at 7:10 PM Sean Paul
On Tue, Apr 02, 2019 at 06:36:21PM +0300, Tomi Valkeinen wrote:
> On 21/11/2018 18:09, Sebastian Reichel wrote:
> > Hi,
> >
> > Here is another round of the DSI command mode panel patchset
> > integrating the feedback from PATCHv4. The patches are based
> > on 4.20-rc1 + fixes from Laurent and
Hi Michael,
On Tue, 2019-04-02 at 15:49 +0200, Michael Grzeschik wrote:
> The destroy function in drm_mode_config_cleanup will remove the objects
> in ipu-drm-core by calling its destroy functions if the bind function
> fails. The drm_crtc is also part of the devres allocated ipu_crtc
> object.
Hi Sebastian,
On 21/11/2018 18:09, Sebastian Reichel wrote:
> Hi,
>
> Here is another round of the DSI command mode panel patchset
> integrating the feedback from PATCHv4. The patches are based
> on 4.20-rc1 + fixes from Laurent and Tony. I dropped the patches
> for OMAP3 support (it needs a
Hi Emil,
On Tue, Apr 02, 2019 at 10:43:31AM +0100, Emil Velikov wrote:
> On Tue, 19 Mar 2019 at 21:57, Maxime Ripard wrote:
> > drm_format_num_planes() is basically a lookup in the drm_format_info table
> > plus an access to the num_planes field of the appropriate entry.
> >
> > Most drivers are
On Thu, Mar 28, 2019 at 05:23:39PM +0530, Jagan Teki wrote:
> On Tue, Mar 19, 2019 at 4:26 PM Maxime Ripard
> wrote:
> >
> > On Mon, Mar 11, 2019 at 08:28:22PM +0530, Jagan Teki wrote:
> > > On Mon, Mar 11, 2019 at 7:39 PM Maxime Ripard
> > > wrote:
> > > >
> > > > On Thu, Mar 07, 2019 at
On Thu, Mar 21, 2019 at 08:08:58PM +0530, Jagan Teki wrote:
> On Tue, Mar 19, 2019 at 3:55 PM Maxime Ripard
> wrote:
> >
> > On Mon, Mar 11, 2019 at 09:31:11PM +0530, Jagan Teki wrote:
> > > On Mon, Mar 11, 2019 at 9:07 PM Maxime Ripard
> > > wrote:
> > > >
> > > > On Mon, Mar 11, 2019 at
On Thu, Mar 21, 2019 at 07:40:32PM +0530, Jagan Teki wrote:
> On Tue, Mar 19, 2019 at 4:23 PM Maxime Ripard
> wrote:
> >
> > On Mon, Mar 11, 2019 at 09:36:27PM +0530, Jagan Teki wrote:
> > > On Mon, Mar 11, 2019 at 9:08 PM Maxime Ripard
> > > wrote:
> > > >
> > > > On Mon, Mar 11, 2019 at
Hi,
Le lundi 01 avril 2019 à 11:35 -0700, Eric Anholt a écrit :
> The global list of all debugfs entries for the driver was painful: the
> list couldn't see into the components' structs, so each component had
> its own debugs show function to find the component, then find the
> regset and dump
Hi,
On Mon, 2019-04-01 at 11:35 -0700, Eric Anholt wrote:
> One might want to use the VC4 display stack without using Mesa.
> Similar to the debugfs fixes for not having all of the possible
> display bits enabled, make sure you can't oops in vc4 if v3d isn't
> enabled.
>
> v2: Fix matching
On Tue, Apr 02, 2019 at 09:49:00AM +0200, Daniel Vetter wrote:
> On Mon, Apr 01, 2019 at 09:49:30AM -0400, Sean Paul wrote:
> > On Fri, Mar 29, 2019 at 08:21:31PM +0100, Daniel Vetter wrote:
> > > On Fri, Mar 29, 2019 at 7:10 PM Sean Paul wrote:
> > > >
> > > > On Fri, Mar 29, 2019 at 04:36:32PM
https://bugs.freedesktop.org/show_bug.cgi?id=109345
--- Comment #9 from Alex Deucher ---
They are still only partial logs. you should just be able to redirect the
output to a file right after you log in. E.g., `dmesg > dmesg.txt`
--
You are receiving this mail because:
You are the assignee
On Tue, Apr 2, 2019 at 7:26 PM Matthew Wilcox wrote:
>
> On Tue, Apr 02, 2019 at 01:55:03PM +0800, Qiang Yu wrote:
> > Thanks, patch is:
> > Reviewed-by: Qiang Yu
>
> This looks like a fairly naive conversion from the old IDR API to the
> XArray API. You should be able to remove mgr->lock
Cc: Stephen Rothwell
Cc: Matthew Wilcox
Cc: Daniel Vetter
Signed-off-by: Qiang Yu
---
drivers/gpu/drm/lima/lima_ctx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/lima/lima_ctx.c b/drivers/gpu/drm/lima/lima_ctx.c
index c8d12f7c6894..22fff6caa961 100644
Hi Maxime,
On Thu, Mar 21, 2019 at 8:08 PM Jagan Teki wrote:
>
> On Tue, Mar 19, 2019 at 3:55 PM Maxime Ripard
> wrote:
> >
> > On Mon, Mar 11, 2019 at 09:31:11PM +0530, Jagan Teki wrote:
> > > On Mon, Mar 11, 2019 at 9:07 PM Maxime Ripard
> > > wrote:
> > > >
> > > > On Mon, Mar 11, 2019 at
Hi Maxime,
On Thu, Mar 21, 2019 at 7:40 PM Jagan Teki wrote:
>
> On Tue, Mar 19, 2019 at 4:23 PM Maxime Ripard
> wrote:
> >
> > On Mon, Mar 11, 2019 at 09:36:27PM +0530, Jagan Teki wrote:
> > > On Mon, Mar 11, 2019 at 9:08 PM Maxime Ripard
> > > wrote:
> > > >
> > > > On Mon, Mar 11, 2019 at
On Tue, Apr 2, 2019 at 7:21 PM Matthew Wilcox wrote:
>
> On Tue, Apr 02, 2019 at 10:50:06AM +1100, Stephen Rothwell wrote:
> > +++ b/drivers/gpu/drm/lima/lima_ctx.c
> > @@ -23,7 +23,7 @@ int lima_ctx_create(struct lima_device *dev, struct
> > lima_ctx_mgr *mgr, u32 *id)
> >
On Tue, Apr 02, 2019 at 09:49:00AM +0200, Daniel Vetter wrote:
> On Mon, Apr 01, 2019 at 09:49:30AM -0400, Sean Paul wrote:
> > On Fri, Mar 29, 2019 at 08:21:31PM +0100, Daniel Vetter wrote:
> > > On Fri, Mar 29, 2019 at 7:10 PM Sean Paul wrote:
> > > >
> > > > On Fri, Mar 29, 2019 at 04:36:32PM
On 02/04/2019 14.21, Laurent Pinchart wrote:
> Hi Peter,
>
> Thank you for the patch.
>
> On Mon, Apr 01, 2019 at 03:33:42PM +0300, Peter Ujfalusi wrote:
>> In case either the HPD gpio is not specified or when the HPD gpio can not
>> be used as interrupt we should tell the core that the HPD
https://bugs.freedesktop.org/show_bug.cgi?id=109695
--- Comment #12 from Marek Olšák ---
(In reply to Michel Dänzer from comment #8)
> Mesa doesn't really need explicit thread affinity at all. All it wants is
> that certain sets of threads run on the same CPU module; it doesn't care
> which
https://bugs.freedesktop.org/show_bug.cgi?id=110045
Marek Olšák changed:
What|Removed |Added
Status|NEW |RESOLVED
Resolution|---
On Mon, Apr 01, 2019 at 08:18:13PM +, Jim Zhang wrote:
> Hi Sir/Madam:
>
> I am using the open source Baytrail gpu drm driver.
>
> Linux kernel version 3.10.61:
> Libdrm package: 2.4.97
>
> When calling function
> properties = drmModeObjectGetProperties(drmfd, plane_id,
>
On Fri, 29 Mar 2019, Randy Dunlap wrote:
> On 3/28/19 8:18 PM, Stephen Rothwell wrote:
>> Hi all,
>>
>> Changes since 20190328:
>>
>> The pidfd tree lost its build failures.
>>
>
> on x86_64, when # CONFIG_ACPI is not set/enabled:
>
> ld: drivers/gpu/drm/i915/intel_panel.o: in function
>
Hi Jacopo,
On Thu, Mar 28, 2019 at 02:15:43PM +0100, Jacopo Mondi wrote:
> On Thu, Mar 28, 2019 at 09:07:15AM +0200, Laurent Pinchart wrote:
> > The V4L2 API is missing the 32-bit RGB formats for the ABGR, XBGR, RGBA
> > and RGBX component orders. Add them, using the same 4CCs as DRM.
> >
> >
On Mon, Apr 1, 2019 at 4:00 PM Bartlomiej Zolnierkiewicz
wrote:
>
>
> On 03/14/2019 12:45 PM, Gerd Hoffmann wrote:
> > Simply add all pci memory bars to struct apertures_struct in
> > remove_conflicting_pci_framebuffers(), without depending on the
> > res_id parameter.
> >
> > The plan is to drop
Hi Peter,
Thank you for the patch.
On Mon, Apr 01, 2019 at 03:41:43PM +0300, Peter Ujfalusi wrote:
> The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes.
> Depending on how many wires are used (24/12) the driver can set the correct
> bus_format.
>
> If the information is not
Hi Johan,
Am Montag, 11. März 2019, 19:14:27 CEST schrieb Johan Jonker:
> Hi,
>
> Just found out that this was patched and reverted before.(lol)
> The revert was 3 months ago for RK3399 boards, but other processors
> like RK3066 are left without shutdown now.
>
> What's the status for a fix?
>
Hi Peter,
Thank you for the patch.
On Mon, Apr 01, 2019 at 03:41:42PM +0300, Peter Ujfalusi wrote:
> tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or
> 12bit, dual-edge (12 lines).
>
> Add bus-width to the documentation so it can be used to select between the
> two
Hi,
On Wed, Dec 19, 2018 at 03:45:38PM +0100, Lucas Stach wrote:
> Keep the page at address 0 as faulting to catch any potential state
> setup issues early.
>
> Signed-off-by: Lucas Stach
> ---
> drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.c | 4 ++--
> 1 file changed, 2 insertions(+), 2
Hi,
On Mon, Jan 07, 2019 at 04:02:33PM +0100, Lucas Stach wrote:
[..snip..]
> I've certainly seen the timeout handler working on GC7000, but with the
> GC7000 support being relatively lightly tested right now, I wouldn't
> bet on us handling all corner cases correctly.
>
> If this is an issue on
From: Vicente Bergas
As explained by Robin Murphy:
> the IOMMU shutdown disables paging, so if the VOP is still
> scanning out then that will result in whatever IOVAs it was using now going
> straight out onto the bus as physical addresses.
We had a more radical approach before in commit
On 4/1/19 3:31 PM, Andreas Schwab wrote:
> On Jan 29 2019, Prarit Bhargava wrote:
>
>> @@ -1066,6 +1069,9 @@ static void fbcon_init(struct vc_data *vc, int init)
>>
>> cap = info->flags;
>>
>> +if (console_loglevel <= CONSOLE_LOGLEVEL_QUIET)
>> +logo_shown =
On 02/04/2019 01:33, Alyssa Rosenzweig wrote:
the userspace definitely doesn't support T624
This is true, yes. Shouldn't be too hard to backport; if there's still
interest in Midgard 1st/2nd gen, I suppose I can grab hardware and sort
it out...
I'm quite likely the only person trying this on
Hi Peter,
Thank you for the patch.
On Mon, Apr 01, 2019 at 03:33:42PM +0300, Peter Ujfalusi wrote:
> In case either the HPD gpio is not specified or when the HPD gpio can not
> be used as interrupt we should tell the core that the HPD needs to be
> polled for detecting hotplug.
>
>
Hi,
Sorry for the late reply.
On 10/29/2018 08:08 PM, Wenwen Wang wrote:
> Hello,
>
> Can anyone please confirm this bug? Thanks!
>
> Wenwen
>
> On Fri, Oct 19, 2018 at 3:39 PM Wenwen Wang wrote:
>>
>> In sisfb_find_rom(), the official pci ROM is checked to see whether it
>> contains the
On Tue, Apr 2, 2019 at 6:26 AM Eric Anholt wrote:
>
> I haven't tested this, but it's a pretty direct port of what I did for
> v3d.
>
> Signed-off-by: Eric Anholt
> ---
> drivers/gpu/drm/lima/lima_gem.c | 37 +
> drivers/gpu/drm/lima/lima_sched.c | 66
https://bugs.freedesktop.org/show_bug.cgi?id=110304
--- Comment #4 from Christian Zigotzky ---
OK, I will try to remove the PowerPC fixes 5.1-4 and 5.1-3.
Thanks
--
You are receiving this mail because:
You are the assignee for the bug.___
dri-devel
https://bugs.freedesktop.org/show_bug.cgi?id=110304
--- Comment #3 from Michel Dänzer ---
I haven't seen any other similar reports.
--
You are receiving this mail because:
You are the assignee for the bug.___
dri-devel mailing list
https://bugs.freedesktop.org/show_bug.cgi?id=110304
--- Comment #2 from Christian Zigotzky ---
Hi Michel,
Does VLC works with the RC2 and RC3 of kernel 5.1 with the open source Radeon
driver on PCs?
Cheers,
Christian
--
You are receiving this mail because:
You are the assignee for the
tree: git://people.freedesktop.org/~gabbayo/linux habanalabs-next
head: aaebb2539ebbebac78f31df2d6ea9f463a27cb8c
commit: 0778d45ef52dd3b9bc92765de7e7f97a80224a06 [23/24] habanalabs: add new
IOCTL for debug, tracing and profiling
config: i386-randconfig-x018-201913 (attached as .config)
On Tue, Mar 26, 2019 at 04:44:54PM -0400, Sean Paul wrote:
> From: Sean Paul
>
> This patch adds a new drm helper library to help drivers implement
> self refresh. Drivers choosing to use it will register crtcs and
> will receive callbacks when it's time to enter or exit self refresh
> mode.
>
On Tue, Apr 2, 2019 at 11:45 AM Neil Armstrong wrote:
>
> On 02/04/2019 11:08, Daniel Vetter wrote:
> > On Tue, Apr 02, 2019 at 10:55:24AM +0200, Neil Armstrong wrote:
> >> Hi Sean,
> >>
> >> On 26/03/2019 21:44, Sean Paul wrote:
> >>> From: Sean Paul
> >>>
> >>> This patch adds a new drm helper
On 02/04/2019 11:08, Daniel Vetter wrote:
> On Tue, Apr 02, 2019 at 10:55:24AM +0200, Neil Armstrong wrote:
>> Hi Sean,
>>
>> On 26/03/2019 21:44, Sean Paul wrote:
>>> From: Sean Paul
>>>
>>> This patch adds a new drm helper library to help drivers implement
>>> self refresh. Drivers choosing to
Hi Maxime,
On Tue, 19 Mar 2019 at 21:57, Maxime Ripard wrote:
>
> drm_format_num_planes() is basically a lookup in the drm_format_info table
> plus an access to the num_planes field of the appropriate entry.
>
> Most drivers are using this function while having access to the entry
> already,
On Tue, Apr 02, 2019 at 11:04:57AM +0200, Gerd Hoffmann wrote:
>
>
> Gerd Hoffmann (2):
> drm/bochs: drop mode_config_initialized
> drm/cirrus: drop mode_info.mode_config_initialized
On both: Reviewed-by: Daniel Vetter
>
> drivers/gpu/drm/bochs/bochs.h| 1 -
>
tree: git://people.freedesktop.org/~gabbayo/linux habanalabs-next
head: aaebb2539ebbebac78f31df2d6ea9f463a27cb8c
commit: 0778d45ef52dd3b9bc92765de7e7f97a80224a06 [23/24] habanalabs: add new
IOCTL for debug, tracing and profiling
config: mips-allyesconfig (attached as .config)
compiler:
On Tue, Apr 02, 2019 at 10:55:24AM +0200, Neil Armstrong wrote:
> Hi Sean,
>
> On 26/03/2019 21:44, Sean Paul wrote:
> > From: Sean Paul
> >
> > This patch adds a new drm helper library to help drivers implement
> > self refresh. Drivers choosing to use it will register crtcs and
> > will
On Tue, Apr 02, 2019 at 04:59:37PM +0800, Qiang Yu wrote:
> On Tue, Apr 2, 2019 at 3:57 PM Daniel Vetter wrote:
> >
> > On Tue, Apr 02, 2019 at 01:55:03PM +0800, Qiang Yu wrote:
> > > Thanks, patch is:
> > > Reviewed-by: Qiang Yu
> >
> > Good time to get started with committing patches? In
Signed-off-by: Gerd Hoffmann
---
drivers/gpu/drm/cirrus/cirrus_drv.h | 1 -
drivers/gpu/drm/cirrus/cirrus_mode.c | 9 ++---
2 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.h
b/drivers/gpu/drm/cirrus/cirrus_drv.h
index
Gerd Hoffmann (2):
drm/bochs: drop mode_config_initialized
drm/cirrus: drop mode_info.mode_config_initialized
drivers/gpu/drm/bochs/bochs.h| 1 -
drivers/gpu/drm/cirrus/cirrus_drv.h | 1 -
drivers/gpu/drm/bochs/bochs_kms.c| 8 ++--
drivers/gpu/drm/cirrus/cirrus_mode.c | 9
Signed-off-by: Gerd Hoffmann
---
drivers/gpu/drm/bochs/bochs.h | 1 -
drivers/gpu/drm/bochs/bochs_kms.c | 8 ++--
2 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/bochs/bochs.h b/drivers/gpu/drm/bochs/bochs.h
index 03711394f1ed..a7f6723bebdd 100644
---
On Tue, Apr 2, 2019 at 3:57 PM Daniel Vetter wrote:
>
> On Tue, Apr 02, 2019 at 01:55:03PM +0800, Qiang Yu wrote:
> > Thanks, patch is:
> > Reviewed-by: Qiang Yu
>
> Good time to get started with committing patches? In general it's kinda
> confusing if the maintainer r-bs a patch, but doesn't
Hi Sean,
On 26/03/2019 21:44, Sean Paul wrote:
> From: Sean Paul
>
> This patch adds a new drm helper library to help drivers implement
> self refresh. Drivers choosing to use it will register crtcs and
> will receive callbacks when it's time to enter or exit self refresh
> mode.
>
> In its
https://bugs.freedesktop.org/show_bug.cgi?id=109345
--- Comment #8 from Allan Cairns ---
Alex
Done, apologies I am somewhat of a novice at this. let me know if you
need more.
Allan
On 02/04/19 2:35 am, bugzilla-dae...@freedesktop.org wrote:
>
> *Comment # 6
https://bugs.freedesktop.org/show_bug.cgi?id=110304
--- Comment #1 from Michel Dänzer ---
(In reply to Christian Zigotzky from comment #0)
> Which update between the RC1 and RC2 could be responsible for the VLC issue?
None of them directly affect the radeon driver.
It's quite likely that this
1 - 100 of 159 matches
Mail list logo
