need to keep the callsign certificate active so you can upload new QSOs
from the old callsign, including uploads of corrected QSOs.
Otherwise, it's not worth hanging onto.
73,
-Rick
--
Rick Murphy, D. Sc., CISSP-ISSAP, K1MU/4, Anna
was None
it would not have worked for the Web lookup either... Wrong! I tested this
and with Data Source set to None the Web lookup still works fine, so it was
all cockpit error.
My apologies,
Rick
W2RDS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Rick Stoneking
Sent
Correction
In the Password box in DX4WIN I entered may password (not my callsign).
Doh! Sorry about the error.
Rick
-Original Message-
From: Rick Stoneking
Sent: Monday, July 3, 2023 08:31
To: Tim moore ; Florian w
Cc: DX4WIN Reflector
Subject: RE: [Dx4win] DX4WIN and QRZ.com
am doing wrong?
DX4WIN version is 9.0.9
Regards,
Rick
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Tim moore
Sent: Monday, June 26, 2023 11:21
To: Florian w
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] DX4WIN and QRZ.com
Hitting JUST F3.when in the QSO
error. Every other time I save changes I get the error. And this happens
even when NO changes are made, just open preferences and immediately tell
DX4WIN to save preferences.
This is not a big deal but it is annoying and I am hoping someone out there
has a solution.
(as double-click on a log
file opens it), so something is not working properly for whatever they're
clicking.
(I've seen cases where people saved the TQSL installer on their desktop and
double click that to open TQSL, then complain that it runs the installer
rather than opening TQSL.)
73,
-Rick
O
to run AD1C's DXWin Data Updater.
Any guidance would be greatly appreciated.
Rick
W2RDS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
separately and use
that (back-dated a few days) when downloading for DX4WIN.
73,
-Rick
On Mon, Jun 20, 2022 at 2:38 PM Luc wrote:
> Thanks Zoran,
> it should be like you tell me, but unfortunately it does not.
> It does not maintain the date of the last import, but every time I ask for
&
, etc.
Logbook of the World is pretty good about rejecting bad zone numbers, so
I'm surprised this one was missed.
73,
-Rick
On Mon, Jun 13, 2022 at 5:00 PM Dan Violette wrote:
> Alan,
>
> Of course, you can look on the LoTW website for this QSO and see what
> VK5DOC
> has
Thanks to an article by AD1C, I inspected the path name of my .dxl file
more carefully and found it was incorrect. Adjusted to the correct SAVE
folder and recovered all my QSOs.
Thanks & 73,
/Rick N6XI
On Sat, Feb 26, 2022 at 10:17 PM Rick Tavan wrote:
> I've been using DX4WIN for man
what happened to ca. 16,000 QSOs?!
I'm currently running DX4WIN under Windows 11 ARM Preview under Parallels
Desktop on a Macbook Pro.
Thanks,
/Rick N6XI
--
Rick Tavan
Truckee and Saratoga, CA
__
DX4WIN mailing list
Home: http
,
-Rick
On Wed, Sep 29, 2021 at 3:57 PM Mike Cizek W0VTT wrote:
> Greetings,
>
>
>
> Has anyone succeeded in running DX4WIN on an Android tablet or phone using
> WINE or one of the other Windoze impersonators? Looking for a quick and
> easy way to log mobile and portable
a contest issue, and don't matter for most logging
programs. If a contest program wants to export their "duplicate QSO" flag,
they can't redefine the COMMENT field to meet their requirements.
Export that information as an APP_ tag, or propose a new tag.
73,
-Rick
On Tue, Sep
fied at
LoTW
291
UNITED STATES OF AMERICA
Current
K8
Y
EN80FP
OH // Ohio
OH,HARDIN // Hardin
04
08
73,
-Rick
On Sat, Apr 17, 2021 at 3:30 PM Georg (DL5NO) wrote:
> Hi Keith,
>
> thanks for your email!
>
> I downloaded a new lotwreport.adi with all QSOs, and after import also
> the
submissions you have made, either through "traditional" (paper QSL) or
"electronic" (LoTW) confirmations."
The directions for using it are on that webpage.
73,
-Rick
On Tue, Mar 9, 2021 at 2:56 AM Luc wrote:
> Hello good day.
> Can someone explain to me what
the Logbook QSOs as they're going to
use the BAND for your QSOs when generating a match.
73,
-Rick
On Mon, Dec 21, 2020 at 6:31 PM Donn Taylor wrote:
> I recently found that I could download my LOTW confirmations into DX4WIN.
> I generated the report, but then there was a file gen
That's one of the great things about "standards" - all you have to do is
assert that there's one.
LoTW only sees the TIME_ON and not the TIME_OFF. So, the time that the QSO
started is what LoTW tracks, not when it ends.
73,
-Rick
On Mon, Jun 15, 2020 at 1:36 PM wrote:
Yes, the intent is that if logging programs export full station locations,
this will stop bogus uploads. If loggers don't export the QTH data, nothing
changes. And, you can always turn this off.
73,
-Rick
On Tue, Apr 7, 2020 at 8:41 PM WA7AA wrote:
> On 07-Apr-20 17:29, Rick Murphy wr
not
there, then it won't be. There's no new requirement.
Please don't panic - this is a new feature, not some new requirement that
will suddenly require loggers to adapt. AND you can turn it all off if you
want.
73,
-Rick
On Tue, Apr 7, 2020 at 8:16 PM WA7AA wrote:
> Hello, everyone.
>
> It seems
Bill, can you provide the full text from TQSL? No QSOs signed says that
either you tried to sign an empty log file, or all of the QSOs in the log
were rejected.
73,
-Rick
On Wed, Feb 19, 2020 at 11:31 AM Bill Murrell wrote:
> Hello all.
>
> I am attempting to upload my entire log
https://www.rickmurphy.net/lotwquery.html
73,
-Rick
On Tue, Dec 10, 2019 at 8:57 PM wrote:
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/m
to either: re-install version 9.0.5, or
re-install version 9.0.4?
The DX4WIN site only has 9.0.3.
73, Rick K0XB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post
ly started to
happen today, after I installed verson 9.0.5.
73, Rick K0XB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hoste
Hi Tom,
I had lots of trouble getting my IC-7300 to work with DX4WIN too. Then I
found an alternate rig control file for the IC-7300 on AD1C's web site,
written by Bjorn SM7IUN. It worked perfectly,
73, Rick K0XB
__
DX4WIN mailing
Somehow I've lost my Callsign Notes. As a matter of fact, I lost my entire
Logbook file from the drop down menu in the Report Editor.
I created a new file but the Callsign Notes come up empty.
Any ideas?
Thanks,
RickWO8L
__
DX4WIN
I'm not even sure where the WSJT log goes on the computer. It just sort of
disappears into vapor space. 73s, RickWO8L -Original Message-
From: David Kozinn, K2DBK
To: 'Keith Beebe W3KB' ; 'Artek Manuals'
; DX4WIN
Sent: Wed, Mar 13, 2019 8:51 pm
Subject: Re: [Dx4win] DX4WIN and
"This is a new computer, Windows 10".
Does this computer have a LPT port? Home computers built in the last
several years don't have LPT ports.
What hardware are you using to add the LPT port?
73,
-Rick
On Wed, Feb 20, 2019 at 6:01 PM W9RPM wrote:
> Hi, I have verif
it'll be useful.)
73,
-Rick
On Sun, Jan 13, 2019 at 9:38 PM Jim Reisert AD1C
wrote:
> > Here is an example. I worked SX60RAAG one time only. On LOTW his GRID is
> KM17UW.
> > When I imported his record, DX4WIN shows on the QSO a GRID of KM18UA and
> an Import
> > error on the
not asking for help, not any more anyway, but I would be interested
if anyone else has had a similar experience.
73, Rick K0XB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Changing your screen layout has caused the windows to be placed off screen.
Please read this article in the archive for info on how to correct this:
https://www.mail-archive.com/dx4win@mailman.qth.net/msg21933.html
73,
-Rick
On Fri, Nov 9, 2018 at 10:08 PM WP Osborne wrote:
> Dx4win ve
Bud,
VE7CC.
Configuration, Ports/Logging Program.
Make sure that "Logging Program Connection" has a checkbox next to "Enable
Telnet", and that "Use port 7300" is selected.
73,
-Rick
On Sun, Nov 4, 2018 at 6:04 PM Bud Governale wrote:
> Hi John.
>
>
What version of DX4WIN are you using?
The updater is built in to DX4WIN 9.x
73,
-Rick
On Wed, Oct 24, 2018 at 9:50 AM George wrote:
> When I download and install DX4WIN updater and try to run it it says "Can't
> find SAVE or IMPORT directory. Is the DX4WIN updater installed in th
Hope 2F (CAS-2F)
73,
-Rick
On Fri, Aug 3, 2018 at 5:11 PM Kirk-N0KK wrote:
> To be fair, Paul, KK4HD contacted me yesterday asking for a list of SAT
> names.
>
> I take this as, he will be looking into updating this feature of his
> program. (?)
>
> Thanks Paul.
>
> K
I am Rick, W8TE.
Is there someone who will help me go from DX4WIN version 8 to version 9?
I have purchased the license for version 9 and have been running version 8 for
years.
THANK YOU!
__
DX4WIN mailing list
Home: http
Fast Log Entry, fle - http://www.df3cb.com/fle/
This is particularly good for strings of QSOs where there's a lot of
similar QSOs (date, band, mode remaining the same.)
73,
-Rick
On Wed, Jun 6, 2018 at 12:41 PM, Mike Rhodes wrote:
> A friend is dipping his toes into the world of compu
IN?
You'll get this error if you move just the dx4win.exe file somewhere
outside of the "dx4w901" directory tree.
73,
-Rick
On Thu, Apr 19, 2018 at 4:38 PM, tobestep <stephen.t...@gmail.com> wrote:
> Hi all:
>
> I am getting an error code for dx4win at startup. the mes
to access the URL:
>
>https://www.dx4win.com/
>
> using Microsoft Internet Explorer 8, which is the latest for Windows
> XP, that access will fail.
>
> I believe that's correct. Rick, please correct me if I'm wrong.
>
That's it. Either the March 12th website certificate
, which is horrible.
Everyone not running XP being held hostage to the XP systems.
There's nothing that you can do to correct this on your end other than an
upgrade to a supported OS.
73,
-Rick
On Fri, Mar 30, 2018 at 11:21 PM, W1ZZ via DX4WIN <dx4win@mailman.qth.net>
wrote:
This has been posted multiple times.
To update DX4WIN 9, you use Help/Check For Updates. The DX4WIN updater
should never be used for 9.x or later.
73,
-Rick
On Thu, Mar 29, 2018 at 9:57 PM, R.T.Liddy <k...@ameritech.net> wrote:
> OOoops Let's try this as plain text!
>
>
I think I solved my problem. In Preferences, I disabled the two calls to
QRZ.com on the Ext Data tab, and things seem OK. It must have been
getting hung-up trying to get data from QRZ.com for some reason.
73, Rick K0XB
__
DX4WIN
as figured out a way to stop
it, I'd appreciate knowing.
Thanks, Rick K0XB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message
What version of DX4WIN are you trying to install? What version of what
operating system?
73,
-Rick
On Fri, Feb 16, 2018 at 7:59 AM, Dean Norris <roa...@k7no.com> wrote:
> I have tried to install DX4 but I keep getting errors that I am missing 3
> dll's. PSKcore, TVich32 and
* 1945-11-15
*Mode* UNKNOWN
*Band* UNKNOWN
There's no QSO details for LoTW to provide since there's no QSO details
recorded. I occasionally submit QSLs to fill in the details for these,
especially back when a submission allowed 100 QSLs.
73
-Rick
On Mon, Feb 12, 2018 at 6:32 PM, Lee Hallin
out
what's off for that QSL.
73,
-Rick
On Tue, Nov 28, 2017 at 8:23 AM, Rick Murphy <k1mu.nos...@gmail.com> wrote:
> OK, that's strange. What does the QSL show on the LoTW site?
> 73,
> -RIck
>
> On Tue, Nov 28, 2017 at 8:02 AM, William Liporace <w...@yccc.org>
OK, that's strange. What does the QSL show on the LoTW site?
73,
-RIck
On Tue, Nov 28, 2017 at 8:02 AM, William Liporace <w...@yccc.org> wrote:
> No, time in the download is 00:00
>
> On Tue, Nov 28, 2017 at 7:44 AM Rick Murphy <k1mu.nos...@gmail.com> wrote:
>
>&
Find that call in the ADIF file you downloaded from LoTW.
What is the time in that entry? Does the time match what you have in DX4WIN
for that QSO?
73,
-Rick
On Tue, Nov 28, 2017 at 7:33 AM, William Liporace <w...@yccc.org> wrote:
> I did a LOTW DXCC QSL Download. I ended up wit
Release notes: http://www.dx4win.com/version-9_01.htm
"Important Note:
This version does not implement the editors for the various databases; this
is planned for the next update."
73,
-Rick
On Fri, Nov 24, 2017 at 10:56 AM, Bruce Blackley <wd4...@embarqmail.com>
wrote:
So, your QSO was after the operation completed. The database marks the
operation as over on the 22nd and your QSO was on the 24th.
Data point showing the end of the DXpedition:
https://dx-world.net/dx0p-spratly-islands/ - the antennas were taken down
on the 22nd.
73,
-Rick
On Fri, Nov 17
at they're blocking your e-mail.
73,
-Rick
On Mon, Oct 30, 2017 at 2:44 PM, Bob Carter <k5e...@cox.net> wrote:
> /I completed the order form and submitted it last week. When should I
> receive the License Key? Bob, K5EYT
> /
>
>
> ---
> This email has been c
MIke,
You should have a window called "Packet Window". If not, check "Packet 1"
preferences and ensure that it says "Type: Regular", "COM Port: TCP/IP".
Click on the packet window, then hit ENTER to get the connection started.
73,
-Rick
On Mon, Oc
I am Rick, W8TE.
I have been running DX4WIN for 13 years.
Now the program does not recognize the frequency, band or mode.
I have made no changes. The program simply quit displaying this vital info.
Wonder if anyone can help me, please?
Rick W8TE
out having to change the length of the mode string (MODE:3 means three
characters of MODE.)
73,
-Rick
On Sun, Oct 8, 2017 at 2:08 PM, andyphewitt <andyphew...@btopenworld.com>
wrote:
>
>
>
>
> From: andyphewitt [mailto:andyphew...@btopenworld.com]
> Sent: 08 October 201
The wording is subtle, but what is says is "when contact are manually
removed or updated".
That means "when the ARRL LoTW staff manually removes or updates them."
73,
-Rick
On Wed, Apr 26, 2017 at 5:10 PM, PY2YP <py...@py2yp.com> wrote:
> Yes, that is the quest
Has anyone used the IC-7300 with DX4WIN?
73, Rick K0XB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http
installing it
back into DX4WIN if you think some QSOs were uploaded in error. That can
cause duplicates to be created.
73,
-Rick
>
> Thanks Again,
> Mike / W8DN
> DX4Win Since Version 0.97
> WN8NBO in 1964
> __
>
people do this is to have a callsign attached to the station
location name. "Ohio - W8DN" and so forth.
Perhaps we should consider changing the name of a "Station Location" to
"QSL Card". That could eliminate the jargon and make it easier to use.
73,
-Rick
--
Ri
were from the same QTH.
(You can avoid that by setting the callsign for the station location to
"None". TQSL will then ask you what callsign certificate to use for the
QSOs being uploaded.)
73,
-Rick
On Wed, Dec 14, 2016 at 3:01 PM, Mike Rhodes <w...@roadrunner.com> wrote:
&
er 31, 1974, or before, are credited as
Mixed mode.*"
73,
-Rick
On Mon, Dec 12, 2016 at 4:24 AM, OZ0J Joe <cont...@oz0j.dk> wrote:
> Hello all
>
>
> Thanks to N7KA and W0VTT for e-mails.
>
> Now I got some more details about the problem.
>
> In versi
regarding what
I could look at?
Thanks es 73, Rick K0XB/6
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http
e possible for this to happen if your computer has been
compromised, but if that's the case then the DXCC desk needs to mark all of
your QSOs as invalid and ineligible for DXCC until you clear this up.)
Occam's Razor says these are QSOs you made, uploaded, and are now confirmed.
73,
-Rick
On Mon, No
How do I get lines to show between QSOs when I print a logbook?
TNX.
73s,
Rick
WO8L
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Thanks! That explains it. I cleared the grid square, and now the heading
is correct.
73, Rick K0XB
On 8/31/2016 6:28 PM, Mike Cizek W0VTT wrote:
TZ4AM has his grid square set to FK52 on LoTW.
/73,/
/Mike Cizek W0VTT/
/
/
/Sent from my Verizon Wireless 4G LTE DROID/
Jim Reisert AD1C
78 degrees, which I believe is correct. Why would it show an
incorrect heading for a specific call?
73, Rick K0XB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mai
one for your USB
serial thingamabob.
The fact that you're using Windows Vista is probably why that USB adapter
isn't automatically recognized: you're using paleolithic software.
73,
-Rick
On Tue, Mar 29, 2016 at 9:20 PM, Todd <tstr...@charter.net> wrote:
> It shows up under syste
Is the USB serial device being recognized?
What port is is using? (Device Manager/Ports).
73,
-Rick
On Tue, Mar 29, 2016 at 8:51 PM, Todd <tstr...@charter.net> wrote:
> My trusty shack computer finally died. I have been scouring the archives
> to no avail for the answer to
's Problem to store
your data reliably.
OK, I'm a "Cloud Ninja" (that's what it says on the sticker on my Mac!) but
for the price (free!) it's a pretty good option.
73,
-Rick
On Sun, Jan 3, 2016 at 5:04 PM, Alan Zack <k7...@cox.net> wrote:
> A long time ago I did a SAVE AS and
my new PC, I always get a
search window when I hit F9. I can select add real time by using my
mouse, but I would really like to be able to use the F9 key.
If anyone has had the same problem and has found a work-around, I'd like
to know about it.
Thanks,
and refuses to work.)
73,
-Rick
On Mon, Nov 2, 2015 at 3:57 PM, Howard K2HK <ho...@hotmail.com> wrote:
> Usually can work it out myself but this has me stymied. Copied dx4win8.05
> from my win7 computer to win10 computer. New computer has no serial ports
> but I have FTDI inter
Enter "KH6" as the Prefix. You choose "K" as the prefix, i.e. USA, so
DX4WIN doesn't permit HI (or AK).
73,
-Rick
On Tue, Oct 27, 2015 at 9:28 PM, Mark K3MSB <mark.k3...@gmail.com> wrote:
> When I enter AH6U it will not let me select HI as the state. It will
Hi,
I am running DX4WIN version 804 or 8.05 Can anyone help me connecting my new
Icom IC-7851 to my computer? The radio has no Serial Port output (D9
connector.) And the new radio has a CI-V address of 8Ah which is not supported
with my version of the logging program.
Thanks, Rick W8TE
, I can only assume
that your QSO took place from Spain. :)
Looking at the jumble of allocations for 60m (
http://en.wikipedia.org/wiki/60-meter_band) it appears that Somalia has the
widest allocation, from 5060 KHz to 5450 KHz.
I'll poke ARRL HQ to reconsider the band limits.
73,
-Rick
account - see the
first link on the page referenced above.
73,
-Rick
On Thu, Mar 19, 2015 at 6:03 PM, bob kr...@bellsouth.net wrote:
Hi,
Well I am now attempting to do LOTW.
I have a certificate, I can log in. I exported and ADF file and uploaded
it (my log) to LOTW.
I can see that I have
You've got to enable the CCUser port.
Configuration menu, Ports/Logging Program. In the Logging Program
Connection box, tick Enable Telnet and choose Use Port 7300.
73,
-Rick
On Wed, Feb 18, 2015 at 6:08 PM, W9RPM j...@w9rpm.com wrote:
Hi,I am trying to get CC User to work with DX4WIN
From the WAS rules:
The District of Columbia may be counted for Maryland.
73,
-Rick
On Fri, Oct 3, 2014 at 7:46 AM, George goofy...@rochester.rr.com wrote:
I'm working on the ARRL's centennial award and last evening I worked
W1AW/3
who is in DC.
How do I tell DX4WIN this is Washington
for their location is ignored.
What I was explaining is why DX4WIN doesn't have DC as a WAS state
selection.
73,
-Rick
On Fri, Oct 3, 2014 at 12:35 PM, Dan Kovatch w8...@buckeye-express.com
wrote:
Then I'm confused. If DC counts for Maryland then why have DC operate when
Maryland has already been on? Maybe
bad idea as it will over-write your log.
73,
-RIck
On Thu, Oct 2, 2014 at 5:13 PM, Dwayne 8...@telus.net wrote:
Tnx very much everyone for responding... When I click on LOTW in my
Dx4win 804 prog. a window pops up showing save and I try to write in area
the file Ve6qx.DXL which is the main
This is a defect in DX4WIN. The ADIF STATE field is NOT US State, it's
a place where the entities Primary Subdivision goes.
If DXCC is Australia and STATE is WA, that's accurate. Interpreting this as
the US State of Washington is wrong.
73,
-Rick
On Mon, Sep 29, 2014 at 2:10 AM, Ian Fugler
Use the web form at
http://www.rickmurphy.net/lotwquery.html
That will run a query that'll by default download QSOs, not just QSLs.
73,
-Rick
On Sun, Sep 28, 2014 at 9:17 AM, Mark Lunday wd4...@triad.rr.com wrote:
All
Not sure why my search for a call FW5JJ shows 4 QSO's
STATE:n means US State. That's not the case.
73,
-Rick
On Thu, Sep 25, 2014 at 2:58 AM, Mel SM0MPV sm0...@ssa.se wrote:
Hello!
If stations from Russia has added their oblast in LOTW, those from
Moscow (MA) or Moscow region (MO) will in DX4WIN sometimes be added as
MA zone 5 or MO zone 4
Is there another copy of the updater already running? If it's running but
not showing up on your desktop it's possible that you just need to open the
window running the updater.
I'd try alt-tab to see if you can open it, followed by a reboot to see if
it works afterwards.
73,
-Rick
On Fri
Configure your copy of CCuser to use a different port, say 7373. Then tell
DX4WIN to use that port.
73,
-Rick
On Wed, Jun 11, 2014 at 9:20 PM, W9RPM j...@w9rpm.com wrote:
Pete, I know that I can put what ever I want in CW Skimmer for the Port,
but when I try and connect to local host
). So have you tried just 80?
The rig is not on the inbuilt list so far as I know. Do I have to buy a
CI-V unit? Have anyone succeded?
Well, you'll need a CI-V cable, but that should be it.
73,
-Rick
__
DX4WIN mailing list
Home: http
A google search for ADIF to Excel leads me to
http://www.dxzone.com/catalog/Software/Log_Converters/
which includes several converters of the type you're looking for.
73,
-Rick
On Mon, Sep 16, 2013 at 5:24 PM, Larry Burke w...@sbcglobal.net wrote:
Hi, Jim the heading on the page says
to the SAVE folder.
Run dx4win, merge the .INI file and open your log.
Jim's page has much more detail that you really should read as it will
help you avoid a few roadblocks.
73,
-Rick
copy everything from the SAVE subdirectory from the old computer to the new one.
On Sun, Aug 18, 2013 at 1:49 PM
frequency
changes, which can interfere with DX4WIN polling.
73,
-Rick
On Thu, Aug 1, 2013 at 2:21 PM, Dave Perry, N4QS n...@comcast.net wrote:
Hal,
I finally had a chance to test the bandmap on 12, 10 and 6 again as you and
Jim, AD1C requested. It works fine on all bands with my K3
://sourceforge.net/projects/trustedqsl/files/ for the download.
Jan verified that installing the update corrected the reported problem.
73,
-Rick
On Sat, Jun 22, 2013 at 6:34 AM, SM7NDX, Jan Eliasson sm7...@ssa.se wrote:
Is there a solution present for TQSL 1.14.1 Database Error?
73 de SM7NDX
for everyone.
Thanks, 73,
-Rick
On Sat, Jun 15, 2013 at 3:47 PM, Mike Bragassa braga...@consolidated.netwrote:
will not see the tq8 file, the new program uploads it, but the process
is transparent for you...
73
Paul F6EXV
Now you tell me!
I have uploaded maybe 3-4 files ( I
The installer should be a .MSI file - you may have extensions hidden,
however, so that's not a problem. It's not a zip file.
The MSI installer is much larger than you report, on the order of 3.4 Mb.
I'd re-download it as apparently something kept the download from
completing.
73,
-Rick
/lotwquery.htm
73,
-Rick
On Sun, Jun 9, 2013 at 1:05 PM, Mike Bragassa braga...@consolidated.netwrote:
Is it possible to export part of a log for use elsewhere from LoTW? Is this
the same mechanics as a LOTW upload?
Mike, K5UO
on your own, use
Sign and Save, not Sign and Upload.
73,
-Rick
On Sun, Jun 2, 2013 at 10:22 PM, Dick White white...@sbcglobal.net wrote:
First time to try LoTW TQSL v. 1.14.1 I have tried two times to up load a
file to LoTW. I get the following message Your message did not appear to
have
be that your certificates and station data are
stranded in an Administrator folder..
If you could, please search your computer for a file called station_data.
It should be in c:\Documents and Settings\username\Application
Data\TrustedQSL on an XP system if I remember correctly.
73,
-Rick
Jim is as usual correct. You don't need to log in to the LoTW site to
automatically upload logs to LoTW - the certificate provides all of the
information needed to verify the upload.
73,
-Rick
On Mon, Jun 3, 2013 at 3:03 PM, Jim Reisert AD1C jjreis...@alum.mit.eduwrote:
On Mon, Jun 3, 2013
that matches what you're saying.
73,
-Rick
On Mon, Jun 3, 2013 at 9:30 AM, w8gc w...@wowway.com wrote:
Just a suggestion if you are signed in to the ARRL lotw site and you try
to use TQSL 1.14.1 it will go through the complete process and tell you it
did not work, you can not be in the web site
cause of this is running TQSL as adminstrator or as some
other user. Taking ownership of those files will fix that case.
73,
-Rick
On Sat, Jun 1, 2013 at 5:03 AM, Erkki Heikkinen
erkki.heikki...@pp.inet.fiwrote:
Just installed the new version from LoTW.
I am probably doing something wrong
will provide
more detail as to why the database could not be created. Once that's
available, I'll contact you to try a test release if you don't mind.
73,
-Rick
On Sun, Jun 2, 2013 at 5:16 AM, Erkki Heikkinen
erkki.heikki...@pp.inet.fiwrote:
**
Tnx Rick,
There are no log.* or db.* files
Yes, the LoTW help desk people are quite aware of the problem with logging
in to LoTW.
That has nothing to do with the TQSL 1.14 update.73,
73,
-Rick
On Thu, May 23, 2013 at 7:40 AM, Michael Gulbranson w...@aol.com wrote:
Jim:
Are the people at LOTW desk aware of this?? If so, what say
?
Thanks
Rick
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list
Thanks to all. Got it going. I think I am going to enjoy the 5000.
It might have been a long night without ya’ll.
Rick
N4HU
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net
and appreciate constructive comments.
I'm having a hard time undestanding the point of your message. Please
explain.
(Apologies, but the team has spent a lot of personal time trying to make
TrustedQSL better. Taking cheap shots ticks me off, and this is a cheap
shot.)
-Rick
On Wed, May 22
I would recommend waiting a few days before updating. The initial flurry of
installs has uncovered a few problems that we would like to fix, largely
due to ARRL moving the Logbook webpages to a new host.
73,
-Rick
On Sun, May 19, 2013 at 5:11 AM, ALAN ZACK k7...@cox.net wrote:
The upgrade
1 - 100 of 298 matches
Mail list logo
