Good morning
Recently I installed Radiowarz's new G5RV MAX with its two 102' legs.
From anyone who has both a KAT500 and the G5RV Max I would greatly appreciate
learning both your experience and results of tuning on 160m.
regardsharry (KX6C)
As a new K3 owner, I am getting the Elecraft bug. I am thinking of ordering
the KAT500 and KPA500 amp and tuner kits. I wonder if schematics are
published like the K3's are. I don't see them on the website. If not
published, are they at least supplied with the kits?
73, Mike KS0T
Hi.
OK, KX3 kit has arrived, courtesy of a collegue who traveled to Dayton.
(Thanks Tim.) Not even emptied the box yet, as had domestic duties to
deal with last night. But, a long weekend coming up, so soon
hopefully.
In preparation, I've downloaded the KX3 utility from the Elecraft site
This being the first time I have used the new Mac KX3 Utility
(v1.13.4.29), I still cannot get it to go through an entire load of new
FW. It gets about 1/2-way through the DSP update and quits. I only
tried once, it quits at roughly the same spot as in the past.
I've heard all the it works
I have the full K-Line and love it. However, my dream K4 would be:
Two receivers
400 watts
Built in panadapter
Built in antenna tuner
160-6M
Separate RX
Choice of several filters
Price = $5000 or less
Basically, an FT-5000 and TS990s killer.
I guess it would be my K-Line in a single box.
I know for a fact that I wouldn't buy one and price has nothing to do with
it. A 400w transceiver is worthless IMHO and any built-in Panadapter is just
like the rest. The KPA500/KAT500 is a better choice and if they problems you
pull it out for repair and still able to use radio same for P3/SVGA.
On Thu, 23 May 2013 01:44:05 -0500, Mike Schultz wrote:
I wonder if schematics are
published like the K3's are. I don't see them on the website. If not
published, are they at least supplied with the kits?
I bought a KPA500. There was no diagram on the web site, and none was
supplied.
H... I fix my own stuff, so my expectation is that a diagram show up
with my newly purchased KPA500. My policy is that if I don't get a diagram
with the electronics and I have to fix it, I reverse engineer it and make
it public to everyone. If I get one, I keep it to myself. Pay me now or
Bruce,
What happens when you try it into a dummy load? What is the power
indication and what is the SWR indicated?
Put it into ATU CAL and try - what are the results?
Then put it into ATU TUN and try again - results?
Are resistors R3 and R4 swapped?
Remove the KXAT1 and measure the
At Dayton exhibit. I'm trying to remember some things about it.,did it have
the lightening connector? I have the newer model I Pad with the lightening
connector and I want to be sure to get the right device to go between my
KX3 and the I pad. How was it connected? Thanks to those with good
Try this URL...
http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf
Ken K3IU
On 5/23/2013 9:01 AM, Dr. William J. Schmidt, II wrote:
H... I fix my own stuff, so my expectation is that a diagram show up
with my newly purchased KPA500.
The Dayton demo was a first generation iPad with the 30-pin expansion
connector. An Apple camera connection kit was used to bring out a USB
port from the 30-pin connector. The Griffin iMic was plugged into the
USB port. The KX3 cable kit was used to bring the IQ baseband signals
to the
Hi All,
KY6R is entitled to dream as we all do.For me though any rig with
more than 100 Watts output is problematic. I want to be able to drive an
amplifier without danger of instantly frying its grids or input circuit.
Most casual operations here are at 65 Watts without an amplifier.
I am having a similar problem, the K3 doesn't key up my 76A. Not a
molex problem, since the amp keys if I pull the cable from the K3 key
out and short the center pin to the shield. Someone mentioned config
settings, but I'm not seeing any that seem relevant to Key Out. So
my question is
Apple's Lightning to 30 pin adapter should work with that setup on the
newer (Lightning) models. I am using Griffin iMic with newer iPad mini
(Lightning) and the adapter no prob. I suggest you use Apple's one not a
knockoff.
On Thu, May 23, 2013 at 9:07 AM, Rick Robinson rickw...@gmail.com
Well, if history is a prologue, it will take Flex 2 or 3 years to bring
the 6000's up to their currently advertized functionality..
73 Jack KZ5A
K3 #4165
On 5/22/2013 9:00 AM, Richard Fjeld wrote:
If you are the type that likes a computer-coupled-radio, then Google the ANAN10
and ANAN100
Good points. You have convinced me that my full K Line already is an FT-5000
and TS-990s killer.
73,
Rich
KY6R
No radios were killed in the making of this email
- Reply message -
From: Fred Smith m...@mo-net.com
To: 'KY6R' rhol...@comcast.net, elecraft@mailman.qth.net
Subject:
The TS-990 still has no test results released yet and I personally have no
use for 130+ knobs and buttons that may only be used once during setup for
many.
Just for concept discussion, it would be really interesting to use a
TFT LCD 5 hi-res color touch screen as part of a new front panel for
the
Jack,
It sounds like the K3 Keyout is not working, It is easy to test that --
Put the K3 into TX TEST
Then tap the XMIT button and check the resistance between the center and
shield of the Keyout connector.
If it does not go to a low resistance, it is time to contact K3support.
73,
Don W3FPR
In spite of what others say, I generally agree with the list.
Although I think 400W may be over the top - 150 to 200W output
with a 48V PA power supply would be extremely useful for those
who do not use external power amplifiers and would provide much
better transmit IMD numbers (cleaner
Guy
I have one of the new Alpha 4040 auto tuners on order and it has one of the
touch screens on it with a lot that it controls. I do mean a lot of
different things including a smith chart display. I am holding my opinion on
this touch screen till I finally receive it. My Smartphone's have had
Please don't put everything in one enclosure.
My loaded K3 can now easily fly along when we go on dxpedition. I
purchased the KPA500 for that same reason. Decent amount of power at
moderate weight. If it would be in one enclosure, I would have trouble
taking it with me. Low weight per item is
Rich those were only my opinions from having a few of those features in other
radios. But I do like my Elecraft K lines.
73,
Fred/N0AZZ
From: rhol...@comcast.net [mailto:rhol...@comcast.net]
Sent: Thursday, May 23, 2013 8:37 AM
To: Fred Smith; elecraft@mailman.qth.net
Subject: Re:
Howdy Gang:
I downloaded KX3 MCU 1.48 a few days ago without problem...all seemed fine.
Today, I tried to set the TIME on my KX3 as I had done many times before but
after entering TIME in the menu and tapping the PRE button to set the HOURS
instead of flashing the display remained steadyI
I would expect the K3 to remain the premiere on the go radio
but I still want a real radio for *home station operation*
without the need for four or five boxes.
73,
... Joe, W4TV
On 5/23/2013 10:23 AM, Arie Kleingeld PA3A wrote:
Please don't put everything in one enclosure.
My loaded K3
If I stack the KPA-500 on the bottom, KAT-500 next up and K3 and put the P3
next to that stack, then it will look like one radio - hi hi.
Hey, that's what I will do.
73,
Rich
KY6R
- Reply message -
From: Fred Smith m...@mo-net.com
To: rhol...@comcast.net, elecraft@mailman.qth.net
On 5/23/2013 7:20 AM, Fred Smith wrote:
Icom 7100 has a touch screen
on it, it is the replacement for the IC-7000
I can't imagine why that would interest anyone -- the 7000 has a user
interface that only the programmer's mother could love. VERY awkward to
use, and it's essentially a
I just tested this and had no problem. You may have done a hold rather than a
tap of the 1/2/3 (PRE/ATTN/APF) switch.
73,
Wayne
N6KR
On May 23, 2013, at 7:39 AM, Joseph Trombino, Jr w...@bellsouth.net wrote:
Howdy Gang:
I downloaded KX3 MCU 1.48 a few days ago without problem...all seemed
The one I have uses a USB connector. Not sure what a Lightening connector
looks like.
73
Gil, W1RG
Date: Thu, 23 May 2013 09:07:09 -0400
From: rickw...@gmail.com
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Griffin Imic used...
At Dayton exhibit. I'm trying to remember some things
Funny, that would be my nightmare K4.
I want a K4 to totally surprise me with features in a configuration that I
would never have thought of.
On May 23, 2013, at 4:57 AM, KY6R rhol...@comcast.net wrote:
I have the full K-Line and love it. However, my dream K4 would be:
Two receivers
400
Must be some interest in the topic!! I have a line connected from the I/Q
output of the KX3 (with the menu ON) into my PC sound card, line in. Nothing
happens using the HDSDR software on the waterfall although I can control the
KX3. Not receiving signals, just noise. Question: What sound cards
How about a 8 - 10 tablet-type interface with significant touch areas that
are user selectable / programmable and other areas dedicated for pan
display, typical display readout?
Dick - KA5KKT
---
Just for concept
I think someone meant the new Apple Thunderbolt connection that is used for
high-speed video.
On May 23, 2013, at 8:02 AM, Richard Gillingham w...@hotmail.com wrote:
The one I have uses a USB connector. Not sure what a Lightening connector
looks like.
73
Gil, W1RG
Date: Thu, 23 May
I would start Console (in the Utilities folder), choose All Messages, then
start the KX3 Utility and see what is logged.
For example, I just ran it connected to a serial device that does not have a
KX3 connected and saw a number of these:
5/23/13 8:19:25.000 AM kernel: ttyioss1201:
Actually, I think they meant the new smaller connector on the so-called 4th gen
iPads. It is called a Lightning Connector.
On May 23, 2013, at 8:19 AM, Phil Hystad phys...@mac.com wrote:
I think someone meant the new Apple Thunderbolt connection that is used for
high-speed video.
On
New Apple devices now use a connector called the Lightning Connector
instead of the old 30 pin connector. You need an adapter to go from the
lightning connector to the old style 30 pin connector. These are available
anywhere Apple devices are sold. The Griffin iMic works fine with the
How about a K4/KX4 built in a format like an iMac
(computer/monitor/all-in-one) or iPad with apps that provide needed user
interface, and external I/O for amps, P4, keyboard (wireless?) and
such. Would be fun with an N1MM app and general logger. Internet
interface for uploading to LoTW,
K4 = tablet program and dock..?
Dick - KA5KKT
How about a K4/KX4 built in a format like an iMac
(computer/monitor/all-in-one) or iPad with apps that provide needed user
interface, and external I/O for amps, P4, keyboard (wireless?) and
such. Would be fun with an N1MM app and
Apple makes a lighting version of the camera connector kit. I am using that. It
plugs right in and gives you a short cable to connect the iMic to. It should be
nicer then using the 30pin adapter plus a camera kit. It is also cheeper to not
buy the adapter. If you already own the 30pin camera
Is that all? My Flex-1500 still doesn't work right. It's pretty good at
holding paper down on my desk though.
73, Bob, WB4SON
On Thu, May 23, 2013 at 9:34 AM, Jack Brabham k...@nctv.com wrote:
Well, if history is a prologue, it will take Flex 2 or 3 years to bring
the 6000's up to their
Hi All,
There is a Pert Hart full review in the June 2013 RadCom.
73
Tim
gm4lmh
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Try a TS-990 plenty of weight there or a 9000MP plenty of HP but you need a
2 wheeler two too move it. The FTDX-5000MP is a good choice for home.
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe Subich,
Personally, I'd be happy if I could upgrade my K3 to get rid of all the
clutter on the back panel. Give me a single Ethernet connection that
allows me rig control, audio in/out, digital modes, IQ out, remote control,
etc. That would eliminate a ton of wiring.
I use a Icon IC-9100 for VHF/UHF
Even with a cheap soundcard, you should be able to see something other than
noise...unless the band is dead. Can you tune around the band and hear signals
on the KX3? If not, you aren't going to see anything on the PC. A lower
quality soundcard should not limit WHAT is displayed, but it will
Still one of the best all mode mobiles made what's your point? It's
replacement has a touch screen was mine, what is your problem just cheap
answers?
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown
Weird… I update my KX3 with my Mac Mini; never had any problem...
Gil.
--
PGP Key: http://keskydee.com/gil.asc
On May 23, 2013, at 6:18 AM, Joel Black wrote:
This being the first time I have used the new Mac KX3 Utility (v1.13.4.29), I
still cannot get it to go through an entire load of new
Hello,
Personally, I'd rather see an updated KX1… Same features as the current one,
but SMT.
CW only, but with the same SW listening capabilities. Four bands if fine.
Internal 12V batteries for a full 5W, or more… Built-in charger...
It would be of course smaller, and should be waterproof. Now
You know what guys we really are lucky to have the K3/KX3 and what they
bring to the table for us. Plus what we are seeing for add-ons that work
well with the KX3 for logging, Panadapter the works and all the people
working on them.
73,
Fred/N0AZZ
-Original Message-
From:
Hi
I'm sure Elecraft is picking up a few interesting suggestions from
this thread so I might as well throw my ideas in as well. I really
like computers and a clean desk. I would like to be able to have
complete control of an excellent radio such as the K3 from my
computer and to be able
Bob how right you are my IC-9100 is just as you say, the one non-Elecraft
radio I kept because they had nothing to match it.
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
Sent: Thursday, May 23, 2013
YOUR REPORTS NEED HEADING, SIMILAR, TO THE YAHOO FLIDIGI REPORTS, K4MWE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Joel,
I suspect you may have a marginal KXUSB adapter. While it may work okay with
the Windows driver, it seems to not be reliable using the OS X driver. I've
seen this happen before. It could start failing on Windows too at some point.
Try contacting Elecraft support and see if they will send
My idea of a KX2 would be to rework the K2 with a factory built DDS, maybe from
the KX3, but the rest would be the user built K2 in a K2 box. This could
include general coverage.
I think many hams would like to build from parts and use their soldering irons.
This would be a cross between the
Really I do not need the 30 pin anything. My IPad is the 4th gen with the
lightning connector.Just a way to get the Griffins male USB connector to
the Apple lightining connector. It looks like the new lightning camera
adaptor cable will work. It is a lightning male with a USB female. Seems to
do
True, but SMT isn't so hard.. I thought it would be, but then built a Weber MTR
and it worked the first time around.. Components are very small, but with the
right tool, including a magnifying lens, it is fairly easy.. So, a
surface-mount kit option would be great.
Gil.
--
PGP Key:
Posts must have crossed. Thanks for the reply. Good to know it works. I'll
start ordering.
On Thursday, May 23, 2013, Jeff Ellis wrote:
Apple makes a lighting version of the camera connector kit. I am using
that. It plugs right in and gives you a short cable to connect the iMic to.
It should
Rich KY6R said
If I stack the KPA-500 on the bottom, KAT-500 next up and K3 and put the P3
next to that stack, then it will look like one radio - hi hi.
Hey, that's what I will do.
73,
Rich
KY6R
Also, wrap the stack in black plastic wrap.
But first put in a lead ingot, so it will be as
I have been using the Apple lightning camera adapter and iMic working no
problem with my iPad Mini and iSDR
Jeff, K7GDE
On May 23, 2013, at 9:55 AM, Rick Robinson rickw...@gmail.com wrote:
Really I do not need the 30 pin anything. My IPad is the 4th gen with the
lightning connector.Just a
Does anyone know the status of the Elecraft K3 10m preamp product?
Thanks,
- John, N0TA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Absolutely Eric. I already have a Glad leaf bag ready!
- Reply message -
From: eric manning emann...@cs.uvic.ca
To: rhol...@comcast.net
Cc: elecraft@mailman.qth.net
Subject: [Elecraft] Musings on a K4
Date: Thu, May 23, 2013 10:07 am
Rich KY6R said
If I stack the KPA-500 on the
I guess my request was buried too much in a recent reply on another topic.
I have used Digipan in the past but understand HRD and Filidigi (sp?)
can do psk-31. Any comments or preferences for modern sw that will
do psk-31 from a computer?
I have two applications:
1) K3 with Dell 2.33
While that's nice to know, most of us are not subscribers to RadCom, and
those who are will already be aware of this. Can you impart any of Mr.
Hart's relevant findings to the list?
73,
Scott, N9AA
On 5/23/13 12:05 PM, Tim wrote:
Hi All,
There is a Pert Hart full review in the June 2013
Does anyone have experience in connecting a K3 to the above software
With a SignaLink integrated sound card?
Any Help would be appreciated...
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
NAVMARCORMARS NNN0KYN
I like HRD 6.0 and DM780. Works great for me for PSK and RTTY.
Rich who is a principal at HRD LLC says that they are working to integrate wsjt
into the HRD portfolio. More than you asked for but thought I would share.
I am using a microkeyer 2 so my setup is different. Hope that helps.
Good
Joe:
Does the KX3 Utility Configuration tab Set Time function work for you with
this new revision? I just used it successfully.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joseph Trombino, Jr
Sent:
Put me on THAT list. I just picked up a second K2 that would be perfect
as a KX2.
SMT is a breeze with a magnifying bench lamp, a decent soldering
station, tweezers and a reasonably steady hand. You have to learn a
couple of different and sometimes scary techniques. Melting all the pins
Joel,
I've noticed an apparent memory leak in the Mac KX3 Utility app. After the
leak hits some critical threshold, the app crashes on me. My apologies to
Elecraft for not yet submitting a bug report.
To check if this is your problem: open the Apple Mac app Activity Monitor
and click the
Problem solved...not sure why but hey, it's working now.
I powered up and down several times trying to set the TIME on the KX3 and the
fifth time was a charm...TIME set FB...no problem.
You just gotta love this digital stuff (grin).
73, Joe W2KJ
Ron,
Try using the Mic In on your soundcard. The I/Q signal levels are
rather low.
73,
Don W3FPR
On 5/22/2013 4:27 PM, KM4VX wrote:
Must be some interest in the topic!! I have a line connected from the I/Q
output of the KX3 (with the menu ON) into my PC sound card, line in. Nothing
I’m selling my Elecraft K3 for either $2,100 or $2,300, depending on whether I
sell it as-is or send it in to Elecraft first for repair of speaker audio, plus
all relevant hardware updates since June 2010.
Description:
K3/100-F (100 W Transceiver)
KAT3 (Internal ATU with 2nd Ant. Jack)
Hello Joe: I also have 1.48 and no problem changing the time. You may want to
try using the KX3 Utility to set the time; can do that in configuration
mode. I also like option of reverting to previous software load and then
re-loading the new software. Just a thought from a novice. 73. Ron
--
Sorry for the length. I've tried to put the really lengthy parts
in footnotes.
General Comments:
I like building things and soldering[1]. I talked with Eric at a
show and he had cogent things to say about support costs for SMT
kits, but with my Heathkit background I think we need to give
The Radcom review by Peter Hart is reproduced on Kenwood's UK website:
http://www.kenwood-electronics.co.uk/WebFiles/File/uk/download/Technolo
gies/RadCom_June13-TS990S.pdf
73 from Ian GM3SEK
__
Elecraft mailing list
Home:
If you are using USB to serial gizmo get a genuine FTDI one (you can buy
them from digikey). I've had lots of strange issues with serial SW since
real serial ports disappeared. They all ended up being dodgy drivers for
the cheapy serial things. The FTDI USB devices have 100% fixed these
Bob,
Loading MCU, stopping the app, restarting the app, and loading the DSP
code fixed my issue.
Trying to load both, one right after the other, I watched my free memory
drop to 1.31GB and then the app just quit.
Ironically, the activity monitor showed the app not responding both
times
My computer has stero lineIn, but mono mic. I found that the iMIC worked
great for this use. I originally got it for the iPAD, but works with the PC
as well.
...bill nr4c
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Thursday, May 23, 2013 2:47 PM
To: KM4VX
Joel,
Thanks for the reminder, I forgot about that. It might be a clue to fix the
problem; I'll add the not responding observation to my bug report to
Elecraft.
Apparently the app is in so tight a loop, pushing code to the KX3, that the
app isn't sending the I'm still alive message to the OS.
It also won't get events to come back to the top. If you put another app on top
of it during the download, then click the dock icon, it won't pop to the top.
No biggy, but might be related.
wunder
K6WRU
On May 23, 2013, at 4:01 PM, NZ9E wrote:
Joel,
Thanks for the reminder, I forgot about
Happy Morse Code Anniversary Day! Friday, 24 May. What indeed hath G-d
wrought? (What the hell does that mean anyway?)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I decided to run through the calibration of my K3 after it came back from the
VK9NT Dxpo. I find I can’t complete the transmit gain calibration as the SWR
is to high on some bands.
1.8 to 10.1 are fine, the rest are as follows 14.1 is 1.5:1, 18.1 1.8:1,
21.1 2.7:1, 24.9 2.2:1, 28.4 2.4:1, 50.1
On 5/23/2013 3:19 PM, Joel Black wrote:
Trying to load both, one right after the other, I watched my free memory
drop to 1.31GB and then the app just quit.
The Apollo Guidance Computer, which got us to the moon multiple times,
had 36 kilowords of program ROM [literally hard *wired* core
TX Gain CAL should be run when transmitting into a 50 ohm dummy load.
Also make sure your KAT3 ATU is bypassed.
73,
Eric
elecraft.com
On 5/23/2013 4:36 PM, peterc281 wrote:
I decided to run through the calibration of my K3 after it came back from the
VK9NT Dxpo. I find I can’t complete the
Our KUSB and KXUSB adapters use the FTDI chip set.
73,
Eric
elecraft.com
On 5/23/2013 2:39 PM, Peter Lambert wrote:
If you are using USB to serial gizmo get a genuine FTDI one (you can buy
them from digikey). I've had lots of strange issues with serial SW since
real serial ports disappeared.
Tx gain cal should succeed as long as the SWR does not exceed 2.0:1. Can you
turn on trace on the view menu and send me a trace of the failing calibration.
Dick, K6KR
On May 23, 2013, at 16:36, peterc281 peterc...@gmail.com wrote:
I decided to run through the calibration of my K3 after it
Greetings: I just subscribed although I've been an Elecraft customer for a
long time (K1, K2 with all accessories, etc). I built a KX3 over the Christmas
holidays and am just now getting a chance to use it. 2 questions. Is it
normal to have noise that is tuneable especially across 40
Also make sure your KAT3 ATU is bypassed.
Reset your ATU into a 50 Ohm load before selecting bypass.
73,
... Joe, W4TV
On 5/23/2013 8:17 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
TX Gain CAL should be run when transmitting into a 50 ohm dummy load.
Also make sure your KAT3 ATU is
I also use HRD / DM780. It works fine for me. Initially, v6 was a little
shaky but they've smoothed it out pretty well. I use it more now than I did
with my FT-857D.
I hope Keith is right and they incorporate WSJT into it. I've been using
that mode a lot lately.
Chris
AB3QV
On Thu, May 23,
I purchased K3 Serial #6294 over a year ago. I was all into digital modes. I
still am, but have been playing with voice the last two days. Can someone
suggest good settings for me. Between Shift, Width, lo and hi cut, nb level,
nr adj, dsp. I have played with them all. Guess I am not real familiar
Murphy strikes again!
I changed the cable and used a 50 ohm load and all good, looks like the
cable was duff!!
Cheers Peter 3IJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-transmitter-gain-calibration-fails-due-high-SWR-tp7574132p7574141.html
Sent from the
Chris,
I use both FLDIGI and Digipan with my K3 without issues, along with a
Signalink USB soundcard,Fldigi mostly when I'm contesting with N1MM
Logger and Digipan otherwise.
I'm using HRD 5.24 for logging now but don't use DM780.
73,
Ron, K5HM
k5hm@gmail.com
www.qrz.com/db/k5hm
90 matches
Mail list logo
