Hi Gerry,
The charger is a constant current source (which adapts its voltage to supply a
constant current) and my guess would be that, at the end of the charging
process, the difference between the voltages of power supply and batteries is
not high enough for the charger to supply its current.
Unless I am misunderstanding the question, you cannot. Not with a
SignaLink. The SignaLink is a mono input sound card (unless you re-wire
the plug to listen to the SubRX).
If you listen with headphones with the sub-receiver on, you will notice
that the subRX appears in the right ear while the
On 5/14/2014 06:09, Joel Black wrote:
Unless I am misunderstanding the question, you cannot. Not with a
SignaLink. The SignaLink is a mono input sound card (unless you re-wire
the plug to listen to the SubRX).
I do have an EMU-0404 though. I haven't used it in two years and it's
in a drawer.
I am running 6.1 and it looks to me like the K3 is well supported, I
have found no deficiency with HRD where the K3 is concerned. I
typically do not use a lot of features on the radio panel, mostly
working with the logbook and DM-780 for RTTY and the digital modes.
73s Jim, W4ATK
On
Bob,
In regards to RX audio only: if the 0404 has a *stereo* input, it will
listen to the MainRX on the left channel and the SubRX on the right
channel when the SubRX is activated. *If* what you're looking for is
being able to receive the audio from the SubRX, you will have to have a
stereo
If anyone is considering selling/upgrading their KPA500 please contact me
offline.
call (at) arrl (dot) net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Sub rec audio is on right channel of all K3 audio outputs ( ring +sleeve). Make
an adapter for SLUSB!
Sent from my iPhone
...nr4c. bill
On May 14, 2014, at 8:06 AM, Bob KD7YZ kd...@denstarfarm.us wrote:
On 5/14/2014 06:09, Joel Black wrote:
Unless I am misunderstanding the question, you
still go to the FDIM QRP thing at fairborne,
but stay at the Dayton University dorms..
very nice.. and it costs 4 guys 104$ each for 4 nights wed- sat
( $ 26 a night)
cu at Dayton
I'll be out at #4041 with a K2/10 batt, tuner,ssb,nb,160, serial
EC2 with 100watt top kat100
isn't this configurable using the CONFIG L -- MIX-- Rsettings?
On 5/14/2014 8:23 AM, Nr4c wrote:
Sub rec audio is on right channel of all K3 audio outputs ( ring +sleeve). Make
an adapter for SLUSB!
Sent from my iPhone
...nr4c. bill
--
GB 73
K5OAI
Sam Morgan
Not on the Line Out unless one sets Line Out= Phones and then the
AF gain controls the line out level.
73,
... Joe, W4TV
On 5/14/2014 9:55 AM, Sam Morgan wrote:
isn't this configurable using the CONFIG L -- MIX-- Rsettings?
On 5/14/2014 8:23 AM, Nr4c wrote:
Sub rec audio is on
Well gee ... when I ordered the K3, I got it loaded because I
correctly figured that eventually (A) I'd need some other non-usual
aspect for my weak signal stuff. And (B) that I would eventually figure
out how to read thee manual and also understand (eventually) what I just
read.
That said, I
Hi ,
I am looking for a K1, Four Bands , with ATU preferably with internal
battery options.
If you have one available, please reply with your offer .
If you are from Europe is most easy due the customs .
Thanking in advance
Marq ct1bww
--
View this message in context:
I however do not know if I have opened another can-of-worms by
connecting the Rx line to the KXV3 Rx-In connector.
No, unless you forget to select the TX antenna when you're not
using the LNA feed.
Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it
a few days when I once
There's nothing to correct, split works fine on Data A.
Worked W1AW/0 on PSK63, split on the first call the other day. My first PSK63
QSO... I liked it, very snappy compared to the watching paint dry PSK31.
You do need to insure that the B vfo is on the same mode as the A. Double
tap A-B
I have a clean working XV50 no problems that I would like to trade for an
XV432.
Anyone interested? 73, Mike K0AZ k...@centurytel.net
'IN GOD WE TRUST'
KØAZMike Sanders EM37cd
www.k0az.com
split works fine for DATA A, AFSK A, and FSK D
but it does *NOT* for PSK D
the question is...
why was this one digital mode not allowed to operate split?
--
GB 73
K5OAI
Sam Morgan
On 5/14/2014 11:15 AM, Wes (N7WS) wrote:
There's nothing to correct, split works fine on Data A.
Worked W1AW/0
Well, they do say opinions are like...
Shout all you want, but it is not imperative that you have a separate sound
card. The computer's integrated sound card can be dedicated to ham radio.
Keeping Windows sounds from playing through the radio is no different from not
transmitting outside
I stand corrected. You are correct. Why, I don't know.
Personally, I would never try to operate these internal digi modes. I can't
send decent CW with the built-in keyer, I shudder to think what my digital
signals would be :-)
Wes N7WS
On 5/14/2014 9:34 AM, Sam Morgan wrote:
split
Since updating to 1.67 my KAT500 tuner is behaving strangely. It won't tune
my 40 meter dipole on auto and when the KAT500 is placed in bypass the
K3 autotuner tunes the same antenna perfectly. I have tried different coax,
but the K3 autotuner at 25 watts output tunes the antenna nicely while the
This one digital mode is used *only* for PSK from paddles. If one
needs to do split PSK31 use DATA A with the computer and either split
audio tones from the computer PSK31 program (DM-780, MixW, WinWarbler,
DigiPan, etc.) or split VFOs like any other mode.
With PSK D one can not monitor the
On Wed, May 14, 2014 at 11:32 AM, Joe Subich, W4TV li...@subich.com wrote:
This one digital mode is used *only* for PSK from paddles.
What about PSK via the P3/SVGA? I thought it uses PSK-D.
Frank
KG6EYC
--
CW: NAQCC #6554 | SKCC #10435 | FISTS #16155 | SOC #1038 | FPQRP #3186
Digital: FHC
It's curious that we have this relatively tiny box of a radio that
suffers from poor ergonomics because of it and then we're supposed to
festoon it with dongles to make it play.
That's unfair and untrue ... there is a distinct disadvantage to
building every option under the sun into a
Anyone having success hooking up remotely through these boxes in a hotel?
Please advise on how your doing so to get by the log in process hotels require.
73’s
Ron
__
Elecraft mailing list
Home:
Well now, *that* is untrue. If you think that is my prescription then so be
it, but that's not what I said. Nothing precludes additional features from
being options, which aren't necessary for modes one is not interested in.
That said, I don't think that a transceiver that is supposed to be
Sent from my iPhone this time well I made it to Dayton everything is fine I
think my Elecraft actually made it through checked luggage I haven't opened it
and turned it on yet but I will soon.
__
Elecraft mailing list
Home:
Well now, let's determine what is acceptable receiver performance. If
all I want is to work some openings on 10 and 6, the K3 can hold its on
with anyone in my experience. Certainly it out performs the IC-9100.
For weak signal work, a preamp is a welcome addition. I use ARR
P50VDG on 6m and
Mike - Assuming your XV50 has the latest PA output module (RA30H0608M)
you might like to consider modifying it for 4 metres in readiness for
when the FCC allocates the 70MHz band in the USA. I have had great
success with this.
http://www.g4dmp.co.uk/XV70mods.pdf
73 de David G4DMP
In a recent
On May 14, 2014 12:01 PM, elecraft-requ...@mailman.qth.net wrote:
Send Elecraft mailing list submissions to
elecraft@mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with
Ooo
On May 14, 2014 12:01 PM, elecraft-requ...@mailman.qth.net wrote:
Send Elecraft mailing list submissions to
elecraft@mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message
I notice that I can often hear CW on SSB but when I switch to CW, the signal
is lost. I'm talking about very strong signals, not stuff in the background.
Is there something that I'm doing wrong to not be able to copy them on CW?
--
View this message in context:
Assuming a K3 (not given in subject line):
Possibly a case where the sideband received when on SSB is opposite what it
is when switching to CW (for the given band). You could try switching to
CW-R (for reverse).
Bruce N1RX
-Original Message-
From: Elecraft
Thanks for sharing this, David.
I don't know when or if we will ever get a 4M allocation in this country.
But, I downloaded your write-up, just in case. I have an XV50 that
languishes here. I'll have to pull the cover off and see which power module
is in it.
Cheers,
Bruce
N1RX
-Original
And enable auto-shift in the menu when switching from CW to SSB and vice
versa, otherwise you will still have to retune to get signal into the
passband again.
73, Olli
Contest, DX radio projects: http://www.dh8bqa.de
Am 14.05.2014 23:01, schrieb Bruce Beford:
Assuming a K3 (not given in
http://elecraft.365791.n2.nabble.com/file/n7589116/7Q7WV.png
Here is a snapshot of my P3 screen when I worked 7Q7WV. Into the noise but
still heard him and made the contact.
Keith, XE3/K5ENS
--
View this message in context:
http://elecraft.365791.n2.nabble.com/7Q7WV-tp7589116.html
Sorry for not identifying the mode (it's a KX3) now should be reflected in
the title. Anyway, thanks for the input. Switching to rev doesn't seem to
have any effect. Seems pretty odd to me that I can hear the signal on SSB
but not on CW (Not to say that I don't get CW signals, just that some which
More info might help, Jim.
Band, Freq, filter width settings? For example: Is it possible you are
hearing CW at a relatively high pitch while in SSB, and when you switch to
CW, it is just outside the (narrower) filter width?
Around hear, you mostly here CW with SSB at the lower end of 40M. There
This autoshift feature had the property of reporting the wrong spot
frequencies after returning to CW mode. Something like that.. I
disabled it because of the problem. This was when it was first
introduced, this possibly has been fixed in updates.
73 de Brian/K3KO
On 5/14/2014 5:22
I have decided to sell my THP HL-45B amplifier. I use this with my KX3
and it needs about 4 W to drive it to full output of 45W. I can drive
the KPA 500 to full output with the KX3 running about 1W to the HL-45B.
This is a very nice small 160-6M amp for any QRP radio. It features auto
band
*Subject:* Beyond Disrespect!]
*Beyond Disrespect!*
In the story of Sodom and Gomorrah, Abraham asked the Lord to spare the
city if he could find 50 righteous people. God responded to Abraham's plea
If I find in Sodom fifty righteous within the city, then I will spare all
...Genesis
This has been covered extensively on the RemoteRig forum. You can find a
lot of material by using the search feature (keywords hotel, Starbucks,
etc.)
For example:
http://www.remoterig.com/forum/index.php?topic=868.msg3490#msg3490
Please do some research before forwarding scam chain letters like this one to a
wide audience:
http://www.snopes.com/politics/religion/gayjesus.asp
Always remember, the Internet is full of scams cleverly aimed at manipulating
decent, well-intentioned people.
73,
Matt VK2RQ
On 15 May 2014, at
This is likely to waste a lot of Elecraft's Internet bandwidth. I say
that not because it's my own personal judgment thing, but because it's
inappropriate for this audience.
End the flame war before it starts. Do not answer. No
counter-arguments will be productive. This thing is basically a
42 matches
Mail list logo
