Don
Prior to the announcement of the svga option, the rf sensor was already
known about.
Then it was noted that the rf sensor was one of two more features to come.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 17/08/2014 2:42 PM, Vic, K2VCO k2vco@gmail.com wrote:
Interesting. And if you
I have two KX3's each with a 2M module. Both units have had the temp
calibration done to them. When using CW, there is a noticeable drift in the
received CW side tone. It has an unsable warble back and forth slowly +/- ~10
HZ or so. Is this the natural drift of the 2M unit I'm seeing
Ha ha that means it a machine won't tell me when I let the magic smoke out
Sent from my iPhone this time
On Aug 16, 2014, at 12:15 PM, Fred Townsend fptowns...@earthlink.net wrote:
ESL, Interlogix Hard-Wired Smoke Alarms Recalled Due to Failure to Alert
Consumers of a Fire
Recall
I will say it one more time.there are more hams trying for DXCC on
1.2GHZ than operate SSTV
George, W6GF
On Sunday, August 17, 2014 6:01 AM, Fred Jensen k6...@foothill.net wrote:
On 8/15/2014 2:56 PM, Wayne Burdick wrote:
Hi all,
Is SSTV demodulation/display something we
Wayne posted this two days ago, in reply to a
message at the KX3 Yahoo group re PX3 Ship Status:
We've delivered a number of field-test units, and the FTs are apparently having
lots of fun while helping us clean up some final firmware issues. We'll update
status again next week.
73,
Wayne
Hi all,
Suddenly I discovered that there is a big crack in the VFO B knob extending
from the set screw. Anybody heard about that one before? Rig has been
indoors with controlled temperature for years and never gets moved. I have a
more modest radio for that purpose (IC7200).
Suddenly I discovered that there is a big crack in the VFO B knob extending
from the set screw. Anybody heard about that one before?
Yes - here's mine:
http://www.ae5x.com/photos/vfo_b.jpg
John AE5X
http://www.ae5x.com/blog
You should contact Elecraft customer support to request a replacement.
73,
matt W6NIA
On Sun, 17 Aug 2014 10:25:47 -0500, you wrote:
Suddenly I discovered that there is a big crack in the VFO B knob extending
from the set screw. Anybody heard about that one before?
Yes - here's mine:
And my VFO B knob was discovered to have one at Field Day this year.
-rick, k7log
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
This should never happen, but if it does, we'll replace it immediately, no
charge. Just send an email to pa...@elecraft.com.
73,
Wayne
N6KR
On Aug 17, 2014, at 8:17 AM, ab2tc ab...@arrl.net wrote:
Hi all,
Suddenly I discovered that there is a big crack in the VFO B knob extending
from
This is within spec, though we're still looking at ways to further reduce it.
73,
Wayne
N6KR
On Aug 17, 2014, at 4:20 AM, Chris Johnson elecr...@ozy.us wrote:
I have two KX3's each with a 2M module. Both units have had the temp
calibration done to them. When using CW, there is a
Mine drifts like crazy on 6 meters but I haven’t done the temp. comp. Will that
help ? It’s not my main 6 meters radio (my K3 is) so it hasn’t been a big
concern.
On Aug 17, 2014, at 12:21 PM, Wayne Burdick n...@elecraft.com wrote:
This is within spec, though we're still looking at ways to
I strongly recommend doing the temperature compensation. On 6 meters this will
leave you something like just +/- 3 Hz of hunting.
73,
Wayne
N6KR
On Aug 17, 2014, at 9:32 AM, Brian Hemmis bhem...@mac.com wrote:
Mine drifts like crazy on 6 meters but I haven’t done the temp. comp. Will
that
Just offering observations in answer to Wayne's questions. SSTV is not
one of the modes I use. Neither is EME, PSK31, and DXCC on 1.2 GHz.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2014 Cal QSO Party 4-5 Oct 2014
- www.cqp.org
On 8/17/2014 7:44 AM, george fritkin wrote:
Thanks to Warren, AB4GE and Don, W3FPR for suggestions relating to my
issue with a newly-installed KX3-2M module, coming up with 22.0
and 44.0 MHz (VFOA, B, respectively) after installation. Should
you encounter this, just holding the kHz button a moment reverted
VFOB to 144.xxx
I also would like this... :) I bet it will sell radios!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
While I'd rather have an XV900 and XV1200, SSTV that was easy to use
would be nice too. I've already been lamb blasted by the list for
suggesting that Wayne and company broaden the XV series. For some folks
if it's not about cw/ssb on HF, Wayne should not waste his time. For
others of us
On Sat,8/16/2014 9:42 PM, Vic, K2VCO wrote:
And if you already have a W2 can you connect the sensor to both or do
you need two sensors? Or could I retire the W2?
What are the specs for the sensor? I have a bunch of high quality
inline sampling couplers.
73, Jim K9YC
Hi,
E-mail to parts submitted. Service like this is certainly unprecedented in
the industry.
Knut - AB2TC (ser# 82)
wayne burdick wrote
This should never happen, but if it does, we'll replace it immediately, no
charge. Just send an email to
parts@
.
73,
Wayne
N6KR
On Aug 17,
My K3 is over 3 yr.s old. I read the posts got the flashlight out. I
can see feel a crack across the front of the knob. About 1/4'' left of
the set screw. Still seems OK. Anyone else see cracks or feel them on
knob B. The 1st yr. I had two of the inner knobs on the AF RF controls
break.
I doubt it unless the K3 is modified to accept computer graphics files
and generate the SSTV audio. There is a big difference between CW,
RTTY and PSK31 decode when one can transmit paddle CW/RTTY/PSK and
SSTV decode when there is no matching SSTV generation capability.
There are a lot more UI
Oh, you gotta try DXCC on 1.2GHz.
It the cat's meow and the bee's knees all rolled into one.
73, Chas
- Original Message -
From: Fred Jensen k6...@foothill.net
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Sunday, August 17, 2014 12:45 PM
Subject: Re: [Elecraft] Slow-scan TV
Yes. And if one of my pet peeves, lousy memory management, was addressed some
of these features could simply be memorized and recalled.
Wes N7WS
On 8/17/2014 10:30 AM, Joe Subich, W4TV wrote:
[snip]
There are a lot more UI and control improvements (separate VOX for SSB
and digital,
Date: Sun, 17 Aug 2014 09:36:46 -0700
From: Wayne Burdick n...@elecraft.com
To: Brian Hemmis bhem...@mac.com
Cc: Elecraft Reflector elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3-2M CW Drift
Message-ID: 375fe400-0225-4061-8838-3653311da...@elecraft.com
Content-Type: text/plain;
Hi Keith,
Thanks for your comments and also to several others who replied
privately. I have now resolved the fault that was causing the +270v T/R
bias line to be shorted and the 270v ERR hard fault to show.
As several others have discovered with the same fault, the problem was
C2, a faulty
Hello Harry,
I'm about to follow your lead and install the Noctua fans in my K3. Did you
have to use alternate mounting hardware for the fans? I see that the Noctua fan
is 25mm thick, vs 15mm for the stock Utech fan and so the mounting bolts will
be too short to hold the Noctua fan?
Thanks,
My VFO B knob cracked within 6 months of assembly. It was replaced immediately
under warranty and no problems since.
Cheers,
John
VK7JB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I discovered a crack in my VFO B knob several months ago. I mended it with a
bit of super glue (cyaonacrylate). My serial range is 33xx, I've had it
for a few years.
Doug, VE3VS
--
View this message in context:
http://elecraft.365791.n2.nabble.com/VFO-B-knob-cracked-tp7592246p7592268.html
I agree with those that would like to see TX monitoring and how about
wider range it'd be handy for quick looks at say 10m for activity to
see 400 or 500 KHZ.
I do some SSTV and enjoy itI think there are more of us than you
think and not just the fools on 14.230 sending soft porn.
I'm selling my W2 Wattmeter. Built from a kit but never actually used.
1.8-54MHz 2000 watt (DCHF-2000) Coupler. Serial cable, sensor cable,
power cable, manual.
$179 + shipping -- PayPal Only.
Thanks
Doug -- K0DXV
__
Elecraft
I have 8 NiHg batteries and charged them for 16 hours. Charge lasts 5
minutes before KX3 goes dead. Minimum voltage is set for 8.4V. with a 13.6
volts 50 amp DX Astron supply max charge voltage get up to 10.6 VDC says my
KX3. When checking the voltage independantly on each cell they all give me
Hello,
Selling my XG2 signal generator. Puts out 1 and 50 uV signal on 80, 40,
20 meters.
Photo at http://wilcoxengineering.com/?p=238 (click image for huge view)
See http://www.elecraft.com/manual/E740084%20XG2%20Manual%20Rev%20E.pdf
First $45 gets it; I'll mail free CONUS.
Cheers, Alan
Hi Knut,
The sudden response to your post prompted me to take out the flashlight.
Mine has a hairline crack from the setscrew back towards the front panel.
The crack is not present from the setscrew to the face of the knob. My unit
is S/N 22xx from 2008.
73,
Mike K2MK
ab2tc wrote
Hi all,
I just took a look at the vfo B knob on my K3 and it's cracked also.
John.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Sold ... thanks for your interest!
On 8/17/14, 7:55 PM, Alan D. Wilcox wrote:
Hello,
Selling my XG2 signal generator. Puts out 1 and 50 uV signal on 80,
40, 20 meters.
Photo at http://wilcoxengineering.com/?p=238 (click image for huge view)
See
And mine too. :-(
Dave Jones
VK4FD
zen...@netspace.net.au wrote on 08/18/2014 07:21 AM:
My VFO B knob cracked within 6 months of assembly. It was replaced immediately
under warranty and no problems since.
Cheers,
John
VK7JB
__
I agree with you David, I think there are a lot of other things that
would be much more useful to a much larger audience than receive-only SSTV.
I'm still working at what the ideal span on my P3 would be, in the
NAQP SSB yesterday, I had it at 100 KHz and it seemed pretty good. For
CW, I
NiMh I ment to post. Oh well
--
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
My K3 is S/N 642. I just looked as closely as I can at my age under
good light, and detect no VFO B knob cracks. I did lose the AF/RF gain
knobs and the ones below it, Elecraft replaced them immediately. I
think tomorrow, when there's daylight, I'll check all the other knobs,
but I really
I figured that's what you meant.
Not quite enough info to understand what is happening for you and what
your charging situation is. NiMh cells are nominally at 2V. My
experience has been that when they've reached the End of Old, [a term
coined by our kids to distinguish between Grandma and
Fred Jensen k6...@foothill.net wrote:
I seem to remember some traffic some time ago that they got a bad batch from
a vendor.
We did. It's impossible trace individual plastic knobs by batch, so we just
replace them as they come up.
Wayne
N6KR
Fred, I think you mean 1.2 or 1.25v nominal each cell. Jim NiMh don't take heat
well. Sounds like you may have over charged. Did they get hot?
73
Another Fred, AE6QL
-Original Message-
From: Fred Jensen k6...@foothill.net
Sent: Aug 17, 2014 7:34 PM
To: elecraft@mailman.qth.net
Subject:
I did check the voltage on each cell when depleted.. There is a sleeper or
2 in the bunch.
--
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On Sun,8/17/2014 7:18 PM, Fred Jensen wrote:
I'm still working at what the ideal span on my P3 would be, in the
NAQP SSB yesterday, I had it at 100 KHz and it seemed pretty good.
I have five of the function keys programmed for different span settings.
The other three are Peak Toggle, Fixed
We just added per-band SPAN settings to the PX3 (and will later add it to the
P3). We're also adding a menu setting to quantize the SPAN selections to 2, 5,
10, 20, 50, 100, and 200 kHz. This behavior would be user-selectable; the
default would be continuously variable, as it is at present.
Would it make more sense for it to be per-mode rather than per-band? For
example, I can imagine on CW you might want to zoom in more than on SSB. Maybe
some P3 owners can comment?
73, Matt VK2RQ
On 18 Aug 2014, at 3:01 pm, Wayne Burdick n...@elecraft.com wrote:
We just added per-band SPAN
We're considering per-mode as well, but at the moment we're experimenting with
per-band. Input welcome.
Wayne
On Aug 17, 2014, at 10:07 PM, Matt VK2RQ matt.vk...@gmail.com wrote:
Would it make more sense for it to be per-mode rather than per-band? For
example, I can imagine on CW you might
When I ordered a replacement I was charged $6, but probably didn't
mention anything about my original one cracking.
Mike
KI0HA
On 8/17/2014 10:55 AM, Wayne Burdick wrote:
This should never happen, but if it does, we'll replace it immediately, no
charge. Just send an email to
48 matches
Mail list logo