A little advice from a Yank. Check with Elecraft. There may be free gold
replacement pins for your K3.
73
Fred, AE6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ted
G7BQM
Sent: Tuesday, January 06, 2015 12:22 AM
To: elecraft@mailman.qth.net
Dear UK K3 owners,
This email is a request for some help in troubleshooting my recently acquired
K3. It is an early model Ser No 104 and has been hardly used. I suspect I am
suffering from front panel to RF board pin corrosion problems since K3 utility
fails to connect and comes up with the
I’m not sure why I didn’t think of this before. How about the MS-3 from
BlackBox? It has one DTE port and three DCE ports on it (or is it the other way
around?). BlackBox also makes a larger box with eight ports but I’m not sure if
it’s an “MS-8” or they call it something different.
We use
And that is why it will not work with multiple computer applications -
they run independently and 'talk' whenever they want to.
LP-Bridge solves that problem by buffering the individual requests. Plus
it also buffers some K3 information so it can respond to some of the
application requests
If your hearing loss is age-related, try a lower frequency, like 400-500 Hz.
Age-related hearing loss usually is in the 1000-3000 KHz range. If it's
occupational-related, it could be any frequency.
I recall an article in QST a number of years ago by N4GG about building a
small equalizer. As I
Howdy Gang:
I have a like-new KFL1-2 20/40M fully built board for the K1.
Will ship for $40.
73, Joe W2KJ
I QRP, therefore I am
__
Elecraft mailing list
Home:
Both Raspberry Pi spectrum displays have found new homes.
73
Jim K8JK
Sent from my iPad
On Jan 4, 2015, at 8:38 AM, Jim Kvochick k...@att.net wrote:
Now that I have my PX3 on my KX3, I have some hardware that I'd like to get
rid of.
I have TWO Raspberry Pi model B units, each
On Tue,1/6/2015 10:25 AM, KK5IB wrote:
To
connect it to the K3, is it as simple as K3 Stereo line out to the 322
stereo line in, and K3 Stereo line in to 322 line out, with USB cable to
computer? I suppose it's best or correct to maintain the L/R stereo
separation in the cables, that is using
True ... probably not so much in North America, but it does happen.
Aside from the fact that we hams seem to nounify and verbify
International Q Signals, in hamdom, QRP seems to have two distinct
meanings:
If you're in a contest or event as a QRP entry, it is very specific ...
5 W or less.
Darryl,
Digital modes normally use only the left channel, although there are
some applications that allow you to switch it to the right.
The K3 Line In and Line Out jacks are stereo type, but there is no
connection to the ring contact, and the audio will only appear on the
normal left
Phil,
I had a hearing test done, and asked for the resultant data showing
frequency vs sensitivity...
I selected a spot where my ear was most sensitive in the 400 to 700 Hz
range, and then set the K3 zero beat to that frequency...
CW is a LOT better now! I had placed the zero beat at my
OK, got to share with you folks a new one for me.
Many of you know that I love to trade radios.
Someday.. I may even trade off s/n 5702, which is a K2/100 but.. not just yet
for that much wanted KX3...
Today, I got an opportunity to purchase another K2. I was told that the guy
worked for
On Tue,1/6/2015 9:00 AM, Wes (N7WS) wrote:
The K3 has a built-in receive equalizer so I don't see a need for an
external one.
Right. K6DGW has severe hearing loss. I advised him to set RXEQ for max
cut of the low bands and max boost of the high bands. He says it's not
perfect, but good
Hello Guys;
Thanks to those that offered suggestions but due to operator error I was
only able to read AC5P (Mike). If the others would try again I would appreciate
it. Also if any one else has some thoughts about being able to hear your CW
sidetone better with different headset(I have
FT-100 Knob sold. Tks for the shown interest.Andreas Tsekos (SV1DEH)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I'm having issues with connecting my Mac with my K3. I used to be able to do
it without much fuss. I decided my Keyspan went caput, so I bought another
one.
The green light on the Keyspan (19HS) is solid when plugged into the RS232
port on the K3 when the K3 is on, but the K3 Utility shows no
Incredible, Fred. I keep thinking I should sell
my K2 (#380) -- with all options including KDSP2,
KPA100 KAT100, and all updates - even the MAB
and Mic adapter board -- but each time I consider
it the nostalgia sets in: Loved building it. OTOH
-- with an all up K3 system and a KX3/PX3 for
The dual decode works fine in cocoaModem. I used it quite a bit this past year
with the W1AW/x stations working RTTY split. I have the second receiver and use
my K3 with a CreativeLabs E-MU 0204.
73,
Joel - W4JBB
On Jan 6, 2015, at 8:10 PM, Bill Frantz fra...@pwpconsult.com wrote:
On
Strange one. Trying to make audio in and out connections with my Mac Mini and
my KX3 Line for use with cocoaModem and FLDigi. Mac Mini “sees the Mic, and
responds to the RX I/Q stream from the PX3. BUT, when I connect the iMic to the
KX3 MIC port, it sends the KX3 into a scan frequency mode.
On 1/6/15 at 11:10 AM, w3...@embarqmail.com (Don Wilhelm) wrote:
Digital modes normally use only the left channel, although
there are some applications that allow you to switch it to the right.
The K3 Line In and Line Out jacks are stereo type, but there is
no connection to the ring contact,
Hello K3 owners !
Want to know the lowest power setting Elecraft internal 2 meter transv.(
K144XV-K)??, know the max out is 8 to 10 watt approx...
My DB6NT transverters ( IF 144 MHz) need 0,5 to 5 watt ,(IF power settings are
adjustable in the DB6NT Transverter)
73' Viggo LA9NEA
On Tue,1/6/2015 11:10 AM, Don Wilhelm wrote:
Digital modes normally use only the left channel, although there are
some applications that allow you to switch it to the right.
WSJT-X, MMTTY, and 2-Tone all can be set to decode either channel.
WSJT10 only connect to the left channel. I've been
Hi guys,
It wouldn't be hard to add an option to change the color of the VFO A
cursor. But I want to make sure I understand the problem.
By the way, I also have typical male red-green color blindness but I
have no trouble distinguishing the VFO A and VFO B cursors. There are
several types
Roberto, I have just worked a similar problem through with my KX3 Line and my
Mac. We have different connectors between the K3 and the KX3, but here are some
things I learned with the KX3 that might help you:
1) Make sure the chipset driver is updated. In the KXUSB (KX3 A/D USB cable)
world, I
I think I'm the first to use and mention in this forum the CM500. I have some
age and noise related hearing loss (mostly right side) and tinnitus. I use a CW
sidetone around 400-450 HZ.
The K3 has a built-in receive equalizer so I don't see a need for an external
one.
Wes N7WS
On
LP-Bridge is great. I connect the K3 to my general logging program (DXBase),
RTTY program (AXETTY, a DXBase specific version of MMTTY), N1MM and SpectraVue
(SDR-IQ panadapter). They all talk to each other without conflict. I have it
set up to create the virtual ports and start the connected
I have a Tascam US-322 USB Audio Interface to connect to my K3 for digital
use. I picked it because it has support for Windows 7/8 and 24 bit/96 KHz
resolution. It has standard L/R in and out connections plus controls. To
connect it to the K3, is it as simple as K3 Stereo line out to the 322
I'm deaf in one ear (nerve zapped 50 years ago by
Meniere's episode) and at 78 have moderate loss in
the other, so it has a hearing aid which makes a
huge difference for music and conversation. I can
still use an ear bug for hamming with the HA in
place, fortunately.
Phil W7OX
On 1/6/15
F.S. Original FT-100 knob, unused, mint condition (knob received after my
K2/100 changed ownership).$75, PayPal, shipped anywhere by registered air mail.
If interested, pls QSO off list: a_tsekos (at) hotmail.com.Andreas Tsekos
(SV1DEH)
29 matches
Mail list logo